usr.bin/ man page cleanups, n-s

1 files changed, 34 insertions, 34 deletions

diff --git a/usr.bin/netstat/netstat.1 b/usr.bin/netstat/netstat.1
index 10aad49fd7f..5329da119c7 100644
--- a/usr.bin/netstat/netstat.1
+++ b/usr.bin/netstat/netstat.1
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: netstat.1,v 1.11 1998/09/07 16:44:33 aaron Exp $
+.\"	$OpenBSD: netstat.1,v 1.12 1998/09/27 16:57:48 aaron Exp $
 .\"	$NetBSD: netstat.1,v 1.11 1995/10/03 21:42:43 thorpej Exp $
 .\"
 .\" Copyright (c) 1983, 1990, 1992, 1993
@@ -80,7 +80,7 @@ will continuously display the information regarding packet
 traffic on the configured network interfaces.
 The fourth form displays statistics about the named protocol.
 .Pp
-The options have the following meaning:
+The options are as follows:
 .Bl -tag -width flag
 .It Fl A
 With the default display,
@@ -98,34 +98,34 @@ show the number of dropped packets.
 .It Fl f Ar address_family 
 Limit statistics or address control block reports to those
 of the specified
-.Ar address family  .
+.Ar address_family .
 The following address families
 are recognized:
-.Ar inet  ,
+.Ar inet ,
 for
-.Dv AF_INET  ,
+.Dv AF_INET ,
 .Ar ipx ,
 for
-.Dv AF_IPX  ,
+.Dv AF_IPX ,
 .Ar atalk ,
 for
 .Dv AF_APPLETALK ,
 .Ar ns ,
 for
-.Dv AF_NS  ,
+.Dv AF_NS ,
 .Ar iso ,
 for
 .Dv AF_ISO ,
 .Ar encap ,
 for
 .Dv AF_ENCAP ,
-.Ar local  ,
+.Ar local ,
 for
-.Dv AF_LOCAL  ,
+.Dv AF_LOCAL ,
 and
-.Ar unix  ,
+.Ar unix ,
 for
-.Dv AF_UNIX  .
+.Dv AF_UNIX .
 .It Fl g
 Show information related to multicast (group address) routing.
 By default, show the IP Multicast virtual-interface and routing tables.
@@ -169,7 +169,7 @@ symbolically).
 This option may be used with any of the display formats.
 .It Fl p Ar protocol 
 Show statistics about
-.Ar protocol  ,
+.Ar protocol ,
 which is either a well-known name for a protocol or an alias for it.  Some
 protocol names and aliases are listed in the file
 .Pa /etc/protocols .
@@ -187,7 +187,7 @@ When
 .Fl s
 is also present, show routing statistics instead.
 .It Fl v
-be verbose. This currently has no effect.
+Be verbose. This currently has no effect.
 .It Fl w Ar wait
 Show network interface statistics at intervals of
 .Ar wait
@@ -212,18 +212,18 @@ to the address family.
 For more information regarding
 the Internet ``dot format,''
 refer to
-.Xr inet 3 ) .
+.Xr inet 3 .
 Unspecified,
-or ``wildcard'', addresses and ports appear as ``*''.
+or ``wildcard'' addresses and ports appear as ``*''.
 If a local port number is registered as being in use for RPC by
-.Xr portmap 8
+.Xr portmap 8 ,
 its RPC service name or RPC service number will be printed in
-[ ] immediately after the port number.
+``[]'' immediately after the port number.
 .Pp
 The interface display provides a table of cumulative
 statistics regarding packets transferred, errors, and collisions.
 The network addresses of the interface
-and the maximum transmission unit (``mtu'') are also displayed.
+and the maximum transmission unit (``MTU'') are also displayed.
 .Pp
 The routing table display indicates the available routes and their
 status.  Each route consists of a destination host or network and
@@ -238,19 +238,19 @@ and
 manual pages.
 The mapping between letters and flags is:
 .Bl -column XXXX RTF_BLACKHOLE
-1	RTF_PROTO1	Protocol specific routing flag #1 
-2	RTF_PROTO2	Protocol specific routing flag #2 
-B	RTF_BLACKHOLE	Just discard pkts (during updates) 
-C	RTF_CLONING	Generate new routes on use 
-D	RTF_DYNAMIC	Created dynamically (by redirect) 
-G	RTF_GATEWAY	Destination requires forwarding by intermediary
-H	RTF_HOST	Host entry (net otherwise) 
+1	RTF_PROTO1	Protocol specific routing flag #1.
+2	RTF_PROTO2	Protocol specific routing flag #2.
+B	RTF_BLACKHOLE	Just discard pkts (during updates). 
+C	RTF_CLONING	Generate new routes on use.
+D	RTF_DYNAMIC	Created dynamically (by redirect).
+G	RTF_GATEWAY	Destination requires forwarding by intermediary.
+H	RTF_HOST	Host entry (net otherwise).
 L	RTF_LLINFO	Valid protocol to link address translation.
-M	RTF_MODIFIED	Modified dynamically (by redirect) 
-R	RTF_REJECT	Host or net unreachable 
-S	RTF_STATIC	Manually added 
-U	RTF_UP	Route usable 
-X	RTF_XRESOLVE	External daemon translates proto to link address
+M	RTF_MODIFIED	Modified dynamically (by redirect).
+R	RTF_REJECT	Host or net unreachable.
+S	RTF_STATIC	Manually added.
+U	RTF_UP	Route usable.
+X	RTF_XRESOLVE	External daemon translates proto to link address.
 .El
 .Pp
 Direct routes are created for each
@@ -262,11 +262,11 @@ protocols normally hold on to a single route for the duration of
 a connection while connectionless protocols obtain a route while sending
 to the same destination.
 The use field provides a count of the number of packets
-sent using that route.  The mtu entry shows the mtu associated with
-that route.  This mtu value is used as the basis for the TCP maximum
-segment size.  A
+sent using that route.  The MTU entry shows the MTU associated with
+that route.  This MTU value is used as the basis for the TCP maximum
+segment size (MSS).  A
 .Sq -
-indicates that the mtu for this route has not been set, and a default
+indicates that the MTU for this route has not been set, and a default
 TCP maximum segment size will be used.  The interface entry indicates
 the network interface utilized for the route.
 .Pp