diff options
author | Reyk Floeter <reyk@cvs.openbsd.org> | 2008-07-19 10:35:32 +0000 |
---|---|---|
committer | Reyk Floeter <reyk@cvs.openbsd.org> | 2008-07-19 10:35:32 +0000 |
commit | 2e36ce62e78a3e17f4e280a66bb9663fdc65d1a4 (patch) | |
tree | 16769281c41d49d78b777556c6b522ad98c4fc34 /usr.sbin | |
parent | 4ef1e0e3834e8f9297a72f0e46d4cae53a5da42f (diff) |
Use the IPv6 documentation prefix 2001:db8::/32 from RFC 3849 instead
of the deprecated 3ffe::/16 6bone test address space. Deprecated or
public IPv6 allocations should not be used for documentation; we have
the same approach for IPv4 by using RFC 1918 private addresses.
ok jmc@ todd@
Diffstat (limited to 'usr.sbin')
-rw-r--r-- | usr.sbin/faithd/README | 24 | ||||
-rw-r--r-- | usr.sbin/faithd/faithd.8 | 20 | ||||
-rw-r--r-- | usr.sbin/ppp/ppp/ppp.8.m4 | 8 | ||||
-rw-r--r-- | usr.sbin/rtadvd/rtadvd.conf | 4 | ||||
-rw-r--r-- | usr.sbin/rtadvd/rtadvd.conf.5 | 8 |
5 files changed, 32 insertions, 32 deletions
diff --git a/usr.sbin/faithd/README b/usr.sbin/faithd/README index 6cc025599f0..3e4e9e94f02 100644 --- a/usr.sbin/faithd/README +++ b/usr.sbin/faithd/README @@ -1,7 +1,7 @@ Configuring FAITH IPv6-to-IPv4 TCP relay Kazu Yamamoto and Jun-ichiro itojun Hagino -$OpenBSD: README,v 1.12 2008/06/04 18:11:35 miod Exp $ +$OpenBSD: README,v 1.13 2008/07/19 10:35:31 reyk Exp $ $KAME: README,v 1.9 2002/05/09 14:10:06 itojun Exp $ @@ -28,12 +28,12 @@ invoked per each TCP services (TCP port number). clients IPv6 node "src" | You will have to allocate an IPv6 address prefix to map IPv4 addresses into. -The following description uses 3ffe:0501:ffff:0000:: as example. +The following description uses 2001:db8:ffff:0000:: as example. Please use a prefix which belongs to your site. FAITH will make it possible to make a IPv6 TCP connection From IPv6 node "src", toward IPv4 node "dest", by specifying FAITH-mapped address -3ffe:0501:ffff:0000::123.4.5.6 -(which is, 3ffe:0501:ffff:0000:0000:0000:7b04:0506). +2001:db8:ffff:0000::123.4.5.6 +(which is, 2001:db8:ffff:0000:0000:0000:7b04:0506). The address mapping can be performed by hand:-), by special nameserver on the network, or by special resolver on the source node. @@ -42,7 +42,7 @@ Setup ===== The following example assumes: -- You have assigned 3ffe:0501:ffff:0000:: as FAITH address prefix. +- You have assigned 2001:db8:ffff:0000:: as FAITH address prefix. - You are willing to provide IPv6-to IPv4 TCP relay for telnet. <<On the translating router on which faithd runs>> @@ -58,8 +58,8 @@ The following example assumes: (3) Route packets toward FAITH prefix into "faith0" interface. # ifconfig faith0 up - # route add -inet6 3ffe:0501:ffff:0000:: -prefixlen 64 ::1 - # route change -inet6 3ffe:0501:ffff:0000:: -prefixlen 64 -ifp faith0 + # route add -inet6 2001:db8:ffff:0000:: -prefixlen 64 ::1 + # route change -inet6 2001:db8:ffff:0000:: -prefixlen 64 -ifp faith0 (4) Execute "faithd" by root as follows: @@ -97,7 +97,7 @@ There are two ways to translate IPv4 address to IPv6 address: (5.b) Add an entry into /etc/hosts so that you can resolve hostname into faked IPv6 address. For example, add the following line for www.netbsd.org: - 3ffe:0501:ffff:0000::140.160.140.252 www.netbsd.org + 2001:db8:ffff:0000::140.160.140.252 www.netbsd.org <<On the translating router on which faithd runs.>> @@ -127,13 +127,13 @@ Advanced configuration If you would like to restrict IPv4 destination for translation, you may want to do the following: - # route add -inet6 3ffe:0501:ffff:0000::123.0.0.0 -prefixlen 104 ::1 - # route change -inet6 3ffe:0501:ffff:0000::123.0.0.0 -prefixlen 104 \ + # route add -inet6 2001:db8:ffff:0000::123.0.0.0 -prefixlen 104 ::1 + # route change -inet6 2001:db8:ffff:0000::123.0.0.0 -prefixlen 104 \ -ifp faith0 By this way, you can restrict IPv4 destination to 123.0.0.0/8. -You may also want to reject packets toward 3ffe:0501:ffff:0000::/64 which -is not in 3ffe:0501:ffff:0000::123.0.0.0/104. This will be left as excerside +You may also want to reject packets toward 2001:db8:ffff:0000::/64 which +is not in 2001:db8:ffff:0000::123.0.0.0/104. This will be left as excerside for the reader. By doing this, you will be able to provide your IPv4 web server to outside diff --git a/usr.sbin/faithd/faithd.8 b/usr.sbin/faithd/faithd.8 index 0f9968b84b9..f8ef96ef47d 100644 --- a/usr.sbin/faithd/faithd.8 +++ b/usr.sbin/faithd/faithd.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: faithd.8,v 1.33 2008/05/17 23:31:52 sobrado Exp $ +.\" $OpenBSD: faithd.8,v 1.34 2008/07/19 10:35:31 reyk Exp $ .\" $KAME: faithd.8,v 1.36 2002/05/09 13:59:16 itojun Exp $ .\" .\" Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. @@ -28,7 +28,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: May 17 2008 $ +.Dd $Mdocdate: July 19 2008 $ .Dt FAITHD 8 .Os .Sh NAME @@ -63,13 +63,13 @@ connection is determined by the last 4 octets of the original .Tn IPv6 destination. For example, if -.Li 3ffe:0501:4819:ffff:: +.Li 2001:db8:4819:ffff:: is reserved for .Nm faithd , and the .Tn TCPv6 destination address is -.Li 3ffe:0501:4819:ffff::0a01:0101 , +.Li 2001:db8:4819:ffff::0a01:0101 , the traffic is relayed to IPv4 destination .Li 10.1.1.1 . .Pp @@ -258,8 +258,8 @@ interface has to be configured properly: # sysctl net.inet6.ip6.forwarding=1 # sysctl net.inet6.ip6.keepfaith=1 # ifconfig faith0 up -# route add -inet6 3ffe:501:4819:ffff:: -prefixlen 96 ::1 -# route change -inet6 3ffe:501:4819:ffff:: -prefixlen 96 -ifp faith0 +# route add -inet6 2001:db8:4819:ffff:: -prefixlen 96 ::1 +# route change -inet6 2001:db8:4819:ffff:: -prefixlen 96 -ifp faith0 .Ed .\".Ss Daemon mode samples .Pp @@ -279,14 +279,14 @@ The following illustrates a simple .Pa faithd.conf setting. .Bd -literal -offset indent -# Permit anyone from 3ffe:501:ffff::/48 to use the translator, +# Permit anyone from 2001:db8:ffff::/48 to use the translator, # to connect to the following IPv4 destinations: # - any location except 10.0.0.0/8 and 127.0.0.0/8. # Permit no other connections. # -3ffe:501:ffff::/48 deny 10.0.0.0/8 -3ffe:501:ffff::/48 deny 127.0.0.0/8 -3ffe:501:ffff::/48 permit 0.0.0.0/0 +2001:db8:ffff::/48 deny 10.0.0.0/8 +2001:db8:ffff::/48 deny 127.0.0.0/8 +2001:db8:ffff::/48 permit 0.0.0.0/0 .Ed .Sh SEE ALSO .Xr faith 4 , diff --git a/usr.sbin/ppp/ppp/ppp.8.m4 b/usr.sbin/ppp/ppp/ppp.8.m4 index 6d10b283988..e1d6140f870 100644 --- a/usr.sbin/ppp/ppp/ppp.8.m4 +++ b/usr.sbin/ppp/ppp/ppp.8.m4 @@ -25,9 +25,9 @@ changecom(,)dnl .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $OpenBSD: ppp.8.m4,v 1.40 2008/05/21 20:10:54 jmc Exp $ +.\" $OpenBSD: ppp.8.m4,v 1.41 2008/07/19 10:35:31 reyk Exp $ .\" -.Dd $Mdocdate: May 21 2008 $ +.Dd $Mdocdate: July 19 2008 $ .Dt PPP 8 .Os .Sh NAME @@ -5481,8 +5481,8 @@ for .Ar gw . .Pp For example, a returned value of -.Dq 3ffe:505:abcd::/48 :: -would result in a routing table entry to the 3ffe:505:abcd::/48 network via +.Dq 2001:db8:abcd::/48 :: +would result in a routing table entry to the 2001:db8:abcd::/48 network via .Dv HISADDR6 and a returned value of .Dq :: :: diff --git a/usr.sbin/rtadvd/rtadvd.conf b/usr.sbin/rtadvd/rtadvd.conf index 3d3eb6428dc..07f7bc369b0 100644 --- a/usr.sbin/rtadvd/rtadvd.conf +++ b/usr.sbin/rtadvd/rtadvd.conf @@ -1,4 +1,4 @@ -# $OpenBSD: rtadvd.conf,v 1.5 2003/06/25 03:46:15 itojun Exp $ +# $OpenBSD: rtadvd.conf,v 1.6 2008/07/19 10:35:31 reyk Exp $ # $KAME: rtadvd.conf,v 1.12 2001/01/21 14:56:38 itojun Exp $ # # Note: All of the following parameters have default values defined @@ -18,4 +18,4 @@ # this part by hand, and then invoke rtadvd with the -s option. #ef0:\ -# :addr="3ffe:501:ffff:1000::":prefixlen#64: +# :addr="2001:db8:ffff:1000::":prefixlen#64: diff --git a/usr.sbin/rtadvd/rtadvd.conf.5 b/usr.sbin/rtadvd/rtadvd.conf.5 index 8e71a3087b3..9eea24e9224 100644 --- a/usr.sbin/rtadvd/rtadvd.conf.5 +++ b/usr.sbin/rtadvd/rtadvd.conf.5 @@ -1,4 +1,4 @@ -.\" $OpenBSD: rtadvd.conf.5,v 1.22 2007/05/31 19:20:29 jmc Exp $ +.\" $OpenBSD: rtadvd.conf.5,v 1.23 2008/07/19 10:35:31 reyk Exp $ .\" $KAME: rtadvd.conf.5,v 1.46 2003/06/17 08:26:35 itojun Exp $ .\" .\" Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. @@ -28,7 +28,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd $Mdocdate: May 31 2007 $ +.Dd $Mdocdate: July 19 2008 $ .Dt RTADVD.CONF 5 .Os .Sh NAME @@ -271,7 +271,7 @@ option to .Xr rtadvd 8 . .Bd -literal -offset ef0:\\ - :addr="3ffe:501:ffff:1000::":prefixlen#64: + :addr="2001:db8:ffff:1000::":prefixlen#64: .Ed .Pp The following example presents the default values in an explicit manner. @@ -282,7 +282,7 @@ default:\\ :chlim#64:raflags#0:rltime#1800:rtime#0:retrans#0:\\ :pinfoflags="la":vltime#2592000:pltime#604800:mtu#0: ef0:\\ - :addr="3ffe:501:ffff:1000::":prefixlen#64:tc=default: + :addr="2001:db8:ffff:1000::":prefixlen#64:tc=default: .Ed .Sh SEE ALSO .Xr termcap 5 , |