diff options
51 files changed, 157 insertions, 161 deletions
diff --git a/bin/df/df.1 b/bin/df/df.1 index 328e9c91722..630439493c9 100644 --- a/bin/df/df.1 +++ b/bin/df/df.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: df.1,v 1.20 2000/02/19 22:44:16 aaron Exp $ +.\" $OpenBSD: df.1,v 1.21 2000/03/05 00:28:51 aaron Exp $ .\" $NetBSD: df.1,v 1.12 1995/12/05 02:42:45 jtc Exp $ .\" .\" Copyright (c) 1989, 1990, 1993 @@ -68,7 +68,7 @@ and .Fl t options below). .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl h "Human-readable" output. Use unit suffixes: Byte, Kilobyte, Megabyte, diff --git a/bin/pax/cpio.1 b/bin/pax/cpio.1 index df9acbe4b21..53ae6d27dc4 100644 --- a/bin/pax/cpio.1 +++ b/bin/pax/cpio.1 @@ -27,7 +27,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $OpenBSD: cpio.1,v 1.8 1999/06/04 02:45:14 aaron Exp $ +.\" $OpenBSD: cpio.1,v 1.9 2000/03/05 00:28:52 aaron Exp $ .\" .Dd February 16, 1997 .Dt CPIO 1 @@ -67,7 +67,7 @@ command copies files to and from a .Nm archive. .Pp -The following options are supported: +The options are as follows: .Bl -tag -width Fl .It Fl o Create an archive. Reads the list of files to store in the diff --git a/bin/pax/pax.1 b/bin/pax/pax.1 index 77eb8c78852..bd7dac96701 100644 --- a/bin/pax/pax.1 +++ b/bin/pax/pax.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: pax.1,v 1.15 1999/07/06 11:20:46 aaron Exp $ +.\" $OpenBSD: pax.1,v 1.16 2000/03/05 00:28:52 aaron Exp $ .\" $NetBSD: pax.1,v 1.3 1995/03/21 09:07:37 cgd Exp $ .\" .\" Copyright (c) 1992 Keith Muller. @@ -331,7 +331,7 @@ will write these operand pathnames in a diagnostic message to standard error and then exit with a non-zero exit status. .Sh OPTIONS -The following options are supported: +The options are as follows: .Bl -tag -width 4n .It Fl r Read an archive file from standard input diff --git a/sbin/dump/dump.8 b/sbin/dump/dump.8 index 4478023abb8..90ed136eecf 100644 --- a/sbin/dump/dump.8 +++ b/sbin/dump/dump.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: dump.8,v 1.21 1999/10/17 19:59:45 aaron Exp $ +.\" $OpenBSD: dump.8,v 1.22 2000/03/05 00:28:49 aaron Exp $ .\" $NetBSD: dump.8,v 1.17 1997/06/05 11:15:06 lukem Exp $ .\" .\" Copyright (c) 1980, 1991, 1993 @@ -97,8 +97,7 @@ is ignored, the only dump level that is supported is .Fl 0 , and all of the files must reside on the same filesystem. .Pp -The following options are supported by -.Nm dump : +The options are as follows: .Bl -tag -width Ds .It Fl 0\-9 Dump levels. diff --git a/sbin/fdisk/fdisk.8 b/sbin/fdisk/fdisk.8 index 4177ff342c6..a7419baf3de 100644 --- a/sbin/fdisk/fdisk.8 +++ b/sbin/fdisk/fdisk.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: fdisk.8,v 1.29 2000/01/22 02:17:53 aaron Exp $ +.\" $OpenBSD: fdisk.8,v 1.30 2000/03/05 00:28:49 aaron Exp $ .\" .\" Copyright (c) 1997 Tobias Weingartner .\" All rights reserved. @@ -57,21 +57,18 @@ in the first column), and if one is found, the boot block from that partition is loaded and executed in place of the original (MBR) boot block. .Pp -The following options are available: -.Pp -.Bl -tag -width "-c cylinders" -compact +The options are as follows: +.Bl -tag -width "-c cylinders" .It Fl i Initialize the MBR sector. -.Pp .It Fl e Edit existing MBR sectors. -.Pp .It Fl f Ar mbrname Specifies an alternate MBR template file. -.Pp -.It Fl c Ar cylinders -.It Fl h Ar heads -.It Fl s Ar sectors +.It Xo Fl c Ar cylinders , +.Fl h Ar heads , +.Fl s Ar sectors +.Xc Specifies an alternate BIOS geometry for .Nm to use. diff --git a/sbin/fsirand/fsirand.8 b/sbin/fsirand/fsirand.8 index af2fdb710ec..d4dd3914196 100644 --- a/sbin/fsirand/fsirand.8 +++ b/sbin/fsirand/fsirand.8 @@ -23,7 +23,7 @@ .\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF .\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $OpenBSD: fsirand.8,v 1.17 1999/07/04 18:59:39 aaron Exp $ +.\" $OpenBSD: fsirand.8,v 1.18 2000/03/05 00:28:57 aaron Exp $ .\" .Dd January 25, 1997 .Dt FSIRAND 8 @@ -69,9 +69,9 @@ may be used on the root filesystem in single-user mode but the system should be rebooted via .Dq reboot -n afterwards. -.Sh OPTIONS +.Pp +The options are as follows: .Bl -tag -width indent -The available options are as follows: .It Fl b Use the default block size (usually 512 bytes) instead of the value gleaned from the disklabel. diff --git a/sbin/ipf/ipf.8 b/sbin/ipf/ipf.8 index 0ef81f48171..730d22715eb 100644 --- a/sbin/ipf/ipf.8 +++ b/sbin/ipf/ipf.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ipf.8,v 1.20 2000/02/19 21:46:46 aaron Exp $ +.\" $OpenBSD: ipf.8,v 1.21 2000/03/05 00:28:50 aaron Exp $ .Dd January 6, 2000 .Dt IPF 8 .Os @@ -119,7 +119,7 @@ proposed changes to the active ruleset (see .Fl I option below). .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl A Apply changes to the active ruleset. This is the default. diff --git a/sbin/modload/modload.8 b/sbin/modload/modload.8 index 21b04e89038..d221d6c47f0 100644 --- a/sbin/modload/modload.8 +++ b/sbin/modload/modload.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: modload.8,v 1.13 1999/10/05 20:53:10 aaron Exp $ +.\" $OpenBSD: modload.8,v 1.14 2000/03/05 00:28:56 aaron Exp $ .\" $NetBSD: modload.8,v 1.5 1995/03/18 14:56:43 cgd Exp $ .\" .\" Copyright (c) 1993 Christopher G. Demetriou @@ -46,9 +46,7 @@ The utility loads a loadable kernel module into a running system. The input file is an object file (.o file). .Pp -The options to -.Nm -are as follows: +The options are as follows: .Bl -tag -width indent .It Fl d Debug. Used to debug diff --git a/sbin/mount/mount.8 b/sbin/mount/mount.8 index e590ba7c038..3a088cef9bf 100644 --- a/sbin/mount/mount.8 +++ b/sbin/mount/mount.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: mount.8,v 1.18 1999/07/21 01:07:54 deraadt Exp $ +.\" $OpenBSD: mount.8,v 1.19 2000/03/05 00:28:50 aaron Exp $ .\" $NetBSD: mount.8,v 1.11 1995/07/12 06:23:21 cgd Exp $ .\" .\" Copyright (c) 1980, 1989, 1991, 1993 @@ -113,7 +113,7 @@ a filesystem mount status from read-write to read-only. Options are specified with a .Fl o flag followed by a comma separated string of options. -The following options are available: +The options are as follows: .Bl -tag -width indent .It async All diff --git a/sbin/ncheck_ffs/ncheck_ffs.8 b/sbin/ncheck_ffs/ncheck_ffs.8 index eb996f995cd..98dee72681c 100644 --- a/sbin/ncheck_ffs/ncheck_ffs.8 +++ b/sbin/ncheck_ffs/ncheck_ffs.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ncheck_ffs.8,v 1.9 1999/10/05 20:53:10 aaron Exp $ +.\" $OpenBSD: ncheck_ffs.8,v 1.10 2000/03/05 00:28:56 aaron Exp $ .\" .\" Copyright (c) 1995, 1996 SigmaSoft, Th. Lockert <tholo@sigmasoft.com> .\" All rights reserved. @@ -45,11 +45,7 @@ generates a list of filenames and inode numbers for the given file system. Names of directories are followed by a .Dq \&. . .Pp -The report is not sorted. -.Pp -The options to -.Nm -are as follows: +The options are as follows: .Bl -tag -width indent .It Fl i Ar numbers Report only those files whose inode numbers follows. @@ -63,8 +59,11 @@ which are ordinarily skipped. Give more verbose information on inodes .It Fl s Report only special files and files with set-user-ID or set-group-ID -set. This is meant to find hidden violations of security policies. +set. +This is meant to find hidden violations of security policies. .El +.Pp +The report is not sorted. .Sh SEE ALSO .Xr sort 1 , .Xr fsck 8 diff --git a/sbin/nfsd/nfsd.8 b/sbin/nfsd/nfsd.8 index ce8d74e656b..f7a4df45436 100644 --- a/sbin/nfsd/nfsd.8 +++ b/sbin/nfsd/nfsd.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: nfsd.8,v 1.10 1999/07/21 01:07:56 deraadt Exp $ +.\" $OpenBSD: nfsd.8,v 1.11 2000/03/05 00:28:50 aaron Exp $ .\" $NetBSD: nfsd.8,v 1.7 1996/02/18 11:58:24 fvdl Exp $ .\" .\" Copyright (c) 1989, 1991, 1993 @@ -59,7 +59,7 @@ Unless otherwise specified, four servers for .Tn UDP transport are started. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl r Register the diff --git a/sbin/raidctl/raidctl.8 b/sbin/raidctl/raidctl.8 index 8a97cb7db62..4a992d2094a 100644 --- a/sbin/raidctl/raidctl.8 +++ b/sbin/raidctl/raidctl.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: raidctl.8,v 1.9 2000/01/07 14:51:41 peter Exp $ +.\" $OpenBSD: raidctl.8,v 1.10 2000/03/05 00:28:56 aaron Exp $ .\" $NetBSD: raidctl.8,v 1.11 2000/01/05 03:02:41 oster Exp $ .\" .\" Copyright (c) 1998 The NetBSD Foundation, Inc. @@ -129,9 +129,7 @@ devices. For more information about the RAIDframe disk device, see This document assumes the reader has at least rudimentary knowledge of RAID and RAID concepts. .Pp -The command-line options for -.Nm -are as follows: +The options are as follows: .Bl -tag -width indent .It Fl a Ar component Ar dev Add diff --git a/sbin/scan_ffs/scan_ffs.8 b/sbin/scan_ffs/scan_ffs.8 index 837a67a8f12..216f21deda1 100644 --- a/sbin/scan_ffs/scan_ffs.8 +++ b/sbin/scan_ffs/scan_ffs.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: scan_ffs.8,v 1.8 1999/07/03 02:11:08 aaron Exp $ +.\" $OpenBSD: scan_ffs.8,v 1.9 2000/03/05 00:28:50 aaron Exp $ .\" .\" Copyright (c) 1997 Niklas Hallqvist, Tobias Weingartner .\" All rights reserved. @@ -51,7 +51,7 @@ create) that covers the whole disk, and finds all probable UFS/FFS partitions on the disk. It has various options to make it go faster, and to print out information to help in the reconstruction of the disklabel. .Pp -The following options are available: +The options are as follows: .Bl -tag -width "-b begin" .It Fl l This will make diff --git a/sbin/scsi/scsi.8 b/sbin/scsi/scsi.8 index a551841d25a..ec69ec500a7 100644 --- a/sbin/scsi/scsi.8 +++ b/sbin/scsi/scsi.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: scsi.8,v 1.14 2000/01/22 02:17:53 aaron Exp $ +.\" $OpenBSD: scsi.8,v 1.15 2000/03/05 00:28:50 aaron Exp $ .\" $FreeBSD: scsi.8,v 1.5 1995/05/05 20:41:58 dufault Exp $ .\" .\" Written By Julian ELischer @@ -93,7 +93,7 @@ can be .Ql - to write input data to stdout. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl f Ar device Specifies the diff --git a/sbin/swapctl/swapctl.8 b/sbin/swapctl/swapctl.8 index b1d5a364a15..fae881a5378 100644 --- a/sbin/swapctl/swapctl.8 +++ b/sbin/swapctl/swapctl.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: swapctl.8,v 1.8 2000/02/26 04:18:55 hugh Exp $ +.\" $OpenBSD: swapctl.8,v 1.9 2000/03/05 00:28:51 aaron Exp $ .\" $NetBSD: swapctl.8,v 1.14 1998/05/22 18:27:52 msaitoh Exp $ .\" .\" Copyright (c) 1997 Matthew R. Green @@ -79,8 +79,8 @@ acts as with the .Fl A option. -.Sh OPTIONS -The following options are available: +.Pp +The options are as follows: .Bl -tag -width 123456 .It Fl A This option causes @@ -199,6 +199,11 @@ at all during system .Xr fsck 8 and may run out of real memory, causing fsck to abnormally exit and startup scripts to fail. +.Sh SEE ALSO +.Xr swapctl 2 , +.Xr fstab 5 , +.Xr mount_nfs 8 , +.Xr vnconfig 8 .Sh HISTORY The .Nm @@ -224,8 +229,3 @@ option of .Nm are not currently supported by .Ox . -.Sh SEE ALSO -.Xr swapctl 2 , -.Xr fstab 5 , -.Xr mount_nfs 8 , -.Xr vnconfig 8 diff --git a/usr.bin/cdio/cdio.1 b/usr.bin/cdio/cdio.1 index f518aa50290..2ffbc4b6335 100644 --- a/usr.bin/cdio/cdio.1 +++ b/usr.bin/cdio/cdio.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: cdio.1,v 1.15 1999/07/30 18:59:30 deraadt Exp $ +.\" $OpenBSD: cdio.1,v 1.16 2000/03/05 00:28:52 aaron Exp $ .Dd July 3, 1995 .Dt CDIO 1 .Os @@ -32,7 +32,7 @@ If no command is given, .Nm enters an interactive mode, reading commands from the standard input. .Pp -The following options are available: +The options are as follows: .Bl -tag -width flag .It Fl s Silent mode. Do not print table headers or human-readable comments. diff --git a/usr.bin/cmp/cmp.1 b/usr.bin/cmp/cmp.1 index 72de16cf064..abd6f065775 100644 --- a/usr.bin/cmp/cmp.1 +++ b/usr.bin/cmp/cmp.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: cmp.1,v 1.6 1999/07/04 11:53:52 aaron Exp $ +.\" $OpenBSD: cmp.1,v 1.7 2000/03/05 00:28:52 aaron Exp $ .\" $NetBSD: cmp.1,v 1.4 1995/09/08 03:22:55 tls Exp $ .\" .\" Copyright (c) 1987, 1990, 1993 @@ -60,7 +60,7 @@ and line number at which the first difference occurred is reported. .Pp Bytes and lines are numbered beginning with one. .Pp -The following options are available: +The options are as follows: .Bl -tag -width flag .It Fl l Print the byte number (decimal) and the differing diff --git a/usr.bin/comm/comm.1 b/usr.bin/comm/comm.1 index 94243707820..ec82036b787 100644 --- a/usr.bin/comm/comm.1 +++ b/usr.bin/comm/comm.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: comm.1,v 1.6 1999/07/07 10:50:07 aaron Exp $ +.\" $OpenBSD: comm.1,v 1.7 2000/03/05 00:28:52 aaron Exp $ .\" $NetBSD: comm.1,v 1.4 1995/03/26 09:25:50 glass Exp $ .\" .\" Copyright (c) 1989, 1990, 1993 @@ -62,9 +62,11 @@ lines only in .Ar file2 ; and lines in both files. .Pp -The filename ``-'' means the standard input. +The filename +.Dq - +means the standard input. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl 1 Suppress printing of column 1. @@ -93,7 +95,7 @@ participate in line comparisons. .\" .It Ev LC_COLLATE .\" .It Ev LC_MESSAGES .\" .El -.Sh DIAGNOSTICS +.Pp The .Nm utility exits 0 on success or >0 if an error occurred. diff --git a/usr.bin/encrypt/encrypt.1 b/usr.bin/encrypt/encrypt.1 index 0d342cfe38d..69767f1dbf9 100644 --- a/usr.bin/encrypt/encrypt.1 +++ b/usr.bin/encrypt/encrypt.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: encrypt.1,v 1.12 1999/07/04 11:53:53 aaron Exp $ +.\" $OpenBSD: encrypt.1,v 1.13 2000/03/05 00:28:52 aaron Exp $ .\" .\" Copyright (c) 1996, Jason Downs. All rights reserved. .\" @@ -44,7 +44,7 @@ prints the encrypted form of to the standard output. This is mostly useful for encrypting passwords from within scripts. .Pp -The following options are supported: +The options are as follows: .Bl -tag -width XxXXXXXXX .It Fl k Run in diff --git a/usr.bin/fmt/fmt.1 b/usr.bin/fmt/fmt.1 index 5db67f12a6c..5bbedcf58a3 100644 --- a/usr.bin/fmt/fmt.1 +++ b/usr.bin/fmt/fmt.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: fmt.1,v 1.7 1999/07/04 11:53:54 aaron Exp $ +.\" $OpenBSD: fmt.1,v 1.8 2000/03/05 00:28:53 aaron Exp $ .\" .\" Copyright (c) 1980, 1990, 1993 .\" The Regents of the University of California. All rights reserved. @@ -70,7 +70,7 @@ to 10 more than the goal length. The spacing at the beginning of the input lines is preserved in the output, as are blank lines and interword spacing. .Pp -The following options are available: +The options are as follows: .Bl -tag -width indent .It Fl c Center the text, line by line. In this case, most of the other diff --git a/usr.bin/from/from.1 b/usr.bin/from/from.1 index 87f9f66b7e0..1bc1058ab7b 100644 --- a/usr.bin/from/from.1 +++ b/usr.bin/from/from.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: from.1,v 1.5 1999/07/04 11:53:54 aaron Exp $ +.\" $OpenBSD: from.1,v 1.6 2000/03/05 00:28:57 aaron Exp $ .\" $NetBSD: from.1,v 1.4 1995/09/01 01:39:09 jtc Exp $ .\" .\" Copyright (c) 1980, 1990, 1993 @@ -50,7 +50,7 @@ prints out the mail header lines from the invoker's mailbox. .Pp -The available options are as follows: +The options are as follows: .Bl -tag -width Fl .It Fl f Ar file The supplied file diff --git a/usr.bin/gprof/gprof.1 b/usr.bin/gprof/gprof.1 index d0303092ab2..36286529846 100644 --- a/usr.bin/gprof/gprof.1 +++ b/usr.bin/gprof/gprof.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: gprof.1,v 1.12 1999/07/04 11:53:54 aaron Exp $ +.\" $OpenBSD: gprof.1,v 1.13 2000/03/05 00:28:53 aaron Exp $ .\" $NetBSD: gprof.1,v 1.6 1995/11/21 22:24:55 jtc Exp $ .\" .\" Copyright (c) 1983, 1990, 1993 @@ -100,7 +100,7 @@ its descendents. .Pp Finally, an index of the function names is provided. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Fl .It Fl a Suppresses the printing of statically declared functions. diff --git a/usr.bin/join/join.1 b/usr.bin/join/join.1 index e462a8fe590..a9a261a54f5 100644 --- a/usr.bin/join/join.1 +++ b/usr.bin/join/join.1 @@ -84,7 +84,8 @@ The default output field separator is a single space character. Many of the options use file and field numbers. Both file numbers and field numbers are 1 based, i.e., the first file on the command line is file number 1 and the first field is field number 1. -The following options are available: +.Pp +The options are as follows: .Bl -tag -width Fl .It Fl a Ar file_number In addition to the default output, produce a line for each unpairable @@ -211,15 +212,15 @@ This has obvious difficulties in the presence of files named .Pp These options are available only so historic shell scripts don't require modification and should not be used. -.Sh STANDARDS -The -.Nm -command is expected to be -.St -p1003.2 -compatible. .Sh SEE ALSO .Xr awk 1 , .Xr comm 1 , .Xr paste 1 , .Xr sort 1 , .Xr uniq 1 +.Sh STANDARDS +The +.Nm +command is expected to be +.St -p1003.2 +compatible. diff --git a/usr.bin/locate/locate/locate.1 b/usr.bin/locate/locate/locate.1 index 3297695e5e0..ddc0ab81577 100644 --- a/usr.bin/locate/locate/locate.1 +++ b/usr.bin/locate/locate/locate.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: locate.1,v 1.10 1999/07/03 02:11:08 aaron Exp $ +.\" $OpenBSD: locate.1,v 1.11 2000/03/05 00:28:53 aaron Exp $ .\" .\" Copyright (c) 1995 Wolfram Schneider <wosch@FreeBSD.org>. Berlin. .\" Copyright (c) 1990, 1993 @@ -33,7 +33,7 @@ .\" SUCH DAMAGE. .\" .\" @(#)locate.1 8.1 (Berkeley) 6/6/93 -.\" $Id: locate.1,v 1.10 1999/07/03 02:11:08 aaron Exp $ +.\" $Id: locate.1,v 1.11 2000/03/05 00:28:53 aaron Exp $ .\" .Dd June 6, 1993 .Dt LOCATE 1 @@ -91,7 +91,7 @@ plain file names. Characters less than 32 or greater than 127 are stored as 2 bytes. .Pp -The following options are available: +The options are as follows: .Bl -tag -width 10n indent .It Fl S Print some statistics about the database and exit. diff --git a/usr.bin/locate/locate/locate.updatedb.8 b/usr.bin/locate/locate/locate.updatedb.8 index bd1140f3405..d7ccfdbe5d6 100644 --- a/usr.bin/locate/locate/locate.updatedb.8 +++ b/usr.bin/locate/locate/locate.updatedb.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: locate.updatedb.8,v 1.8 1999/06/05 01:21:31 aaron Exp $ +.\" $OpenBSD: locate.updatedb.8,v 1.9 2000/03/05 00:28:53 aaron Exp $ .\" .\" Copyright (c) 1996 .\" Mike Pritchard <mpp@FreeBSD.org>. All rights reserved. @@ -54,9 +54,9 @@ script. The contents of the newly built database can be controlled by the .Pa /etc/locate.rc file as well as the command line arguments. -.Sh OPTIONS +.Pp +The options are as follows: .Bl -tag -width -filesystems -The available options are as follows: .It Fl -tmpdir Sets the directory temporary files are stored in. .It Fl -fcodes diff --git a/usr.bin/mktemp/mktemp.1 b/usr.bin/mktemp/mktemp.1 index 7b452362828..83fde04d2fb 100644 --- a/usr.bin/mktemp/mktemp.1 +++ b/usr.bin/mktemp/mktemp.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: mktemp.1,v 1.13 2000/02/07 01:38:11 millert Exp $ +.\" $OpenBSD: mktemp.1,v 1.14 2000/03/05 00:28:57 aaron Exp $ .\" .\" Copyright (c) 1996, 2000 Todd C. Miller <Todd.Miller@courtesan.com> .\" All rights reserved. @@ -84,9 +84,9 @@ subverted, it still allows a simple denial of service attack. For these reasons it is suggested that .Nm be used instead. -.Sh OPTIONS +.Pp +The options are as follows: .Bl -tag -width indent -The available options are as follows: .It Fl d Make a directory instead of a file. .It Fl q diff --git a/usr.bin/msgs/msgs.1 b/usr.bin/msgs/msgs.1 index f12be01d2b3..d3169698923 100644 --- a/usr.bin/msgs/msgs.1 +++ b/usr.bin/msgs/msgs.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: msgs.1,v 1.7 1999/06/10 22:38:03 pjanzen Exp $ +.\" $OpenBSD: msgs.1,v 1.8 2000/03/05 00:28:58 aaron Exp $ .\" $NetBSD: msgs.1,v 1.5 1995/09/28 06:57:39 tls Exp $ .\" .\" Copyright (c) 1980, 1990, 1993 @@ -54,21 +54,27 @@ .Nm msgs is used to read system messages. These messages are -sent by mailing to the login `msgs' and should be short +sent by mailing to the login +.Dq msgs +and should be short pieces of information which are suitable to be read once by most users of the system. .Pp -The options available are as follows: +The options are as follows: .Bl -tag -width Fl .It Fl f -Do not say ``No new messages.'' +Do not say +.Dq \&No new messages. This is useful in a .Pa .login file since this is often the case here. .It Fl q Queries whether there are messages, printing -``There are new messages.'' if there are. -The command ``msgs \-q'' is often used in login scripts. +.Dq There are new messages. +if there are. +The command +.Ic msgs \-q +is often used in login scripts. .It Fl h Print the first part of messages only. .It Fl r @@ -138,14 +144,16 @@ the next time .Nm msgs will pick up where it last left off. .It Ic s -Append the current message to the file ``Messages'' in the current directory; +Append the current message to the file +.Pa Messages +in the current directory; `s\-' will save the previously displayed message. A `s' or `s\-' may be followed by a space and a file name to receive the message replacing the default ``Messages''. .It Ic m A copy of the specified message is placed in a temporary mailbox and -.Xr mail 1 +.Xr mail 1 is invoked on that mailbox. .It Ic p The specified message is piped through the program specified by the diff --git a/usr.bin/newsyslog/newsyslog.8 b/usr.bin/newsyslog/newsyslog.8 index 9fedff1eea4..f9e4d118c74 100644 --- a/usr.bin/newsyslog/newsyslog.8 +++ b/usr.bin/newsyslog/newsyslog.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: newsyslog.8,v 1.16 1999/11/11 22:24:14 millert Exp $ +.\" $OpenBSD: newsyslog.8,v 1.17 2000/03/05 00:28:53 aaron Exp $ .\" .\" Copyright (c) 1997, Jason Downs. All rights reserved. .\" @@ -171,9 +171,8 @@ Specify a command to run instead of sending a signal to the process. The command must be enclosed in double quotes ('"'). You cannot specify both a command and a pid file. .El -.Sh OPTIONS -The following options can be used with -.Nm newsyslog : +.Pp +The options are as follows: .Bl -tag -width XXX .It Fl f Ar config-file Instructs newsyslog to use diff --git a/usr.bin/readlink/readlink.1 b/usr.bin/readlink/readlink.1 index 687b9c037eb..74021c8e5bb 100644 --- a/usr.bin/readlink/readlink.1 +++ b/usr.bin/readlink/readlink.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: readlink.1,v 1.4 1998/09/27 16:57:50 aaron Exp $ +.\" $OpenBSD: readlink.1,v 1.5 2000/03/05 00:28:53 aaron Exp $ .\" .\" Copyright (c) 1990, 1993 .\" The Regents of the University of California. All rights reserved. @@ -53,7 +53,7 @@ on standard output. If readlink is invoked with an argument other than the pathname of a symbolic link, it exits with a non-zero exit code without printing anything. .Pp -The following options are available: +The options are as follows: .Bl -tag -width flag .It Fl f Canonicalize by following every symlink in every component of the given diff --git a/usr.bin/rup/rup.1 b/usr.bin/rup/rup.1 index 5ffc3f4796b..4762e6b23ea 100644 --- a/usr.bin/rup/rup.1 +++ b/usr.bin/rup/rup.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: rup.1,v 1.4 1999/06/05 01:21:38 aaron Exp $ +.\" $OpenBSD: rup.1,v 1.5 2000/03/05 00:28:54 aaron Exp $ .\" -*- nroff -*- .\" .\" Copyright (c) 1985, 1991 The Regents of the University of California. @@ -54,7 +54,7 @@ and the load averages. The load average numbers give the number of jobs in the run queue averaged over 1, 5 and 15 minutes. .Pp -The following options are available: +The options are as follows: .Bl -tag -width indent .It Fl d For each host, report what its local time is. diff --git a/usr.bin/rusers/rusers.1 b/usr.bin/rusers/rusers.1 index 1726bc9017e..182427f0d44 100644 --- a/usr.bin/rusers/rusers.1 +++ b/usr.bin/rusers/rusers.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: rusers.1,v 1.4 1999/06/05 01:21:39 aaron Exp $ +.\" $OpenBSD: rusers.1,v 1.5 2000/03/05 00:28:54 aaron Exp $ .\" Copyright (c) 1983, 1990 The Regents of the University of California. .\" All rights reserved. .\" @@ -55,7 +55,7 @@ on is printed on each line. The command will wait for one minute to catch late responders. .Pp -The following options are available: +The options are as follows: .Bl -tag -width indent .It Fl a Print all machines responding even if no one is currently logged in. diff --git a/usr.bin/sed/sed.1 b/usr.bin/sed/sed.1 index 013b6631e1c..815ca59aa50 100644 --- a/usr.bin/sed/sed.1 +++ b/usr.bin/sed/sed.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: sed.1,v 1.9 2000/03/04 22:19:26 aaron Exp $ +.\" $OpenBSD: sed.1,v 1.10 2000/03/05 00:28:55 aaron Exp $ .\" Copyright (c) 1992, 1993 .\" The Regents of the University of California. All rights reserved. .\" @@ -68,7 +68,7 @@ options. All commands are applied to the input in the order they are specified regardless of their origin. .Pp -The following options are available: +The options are as follows: .Bl -tag -width indent .It Fl a The files listed as parameters for the diff --git a/usr.bin/skeyaudit/skeyaudit.1 b/usr.bin/skeyaudit/skeyaudit.1 index 85984d83abc..f87cee2562a 100644 --- a/usr.bin/skeyaudit/skeyaudit.1 +++ b/usr.bin/skeyaudit/skeyaudit.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: skeyaudit.1,v 1.4 1999/06/05 01:21:40 aaron Exp $ +.\" $OpenBSD: skeyaudit.1,v 1.5 2000/03/05 00:28:58 aaron Exp $ .\" .\" .Dd 22 July 1997 @@ -15,15 +15,15 @@ .Sh DESCRIPTION .Nm searches through the file -.Dq Pa /etc/skeykeys +.Pa /etc/skeykeys for users whose S/Key sequence number is less than .Ar limit , and mails them a reminder to run .Xr skeyinit 1 soon. -.Sh OPTIONS +.Pp +The options are as follows: .Bl -tag -width "-l limit" -indent -The available options are as follows: .It Fl a Check all keys in .Pa /etc/skeykeys . diff --git a/usr.bin/sort/sort.1 b/usr.bin/sort/sort.1 index 95e0f139c11..b9e9c4849bf 100644 --- a/usr.bin/sort/sort.1 +++ b/usr.bin/sort/sort.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: sort.1,v 1.6 2000/01/05 07:40:43 pjanzen Exp $ +.\" $OpenBSD: sort.1,v 1.7 2000/03/05 00:28:55 aaron Exp $ .\" .\" Copyright (c) 1991, 1993 .\" The Regents of the University of California. All rights reserved. @@ -66,7 +66,7 @@ lexicographically. By default, if keys are not given, .Nm sort regards each input line as a single field. .Pp -The following options are available: +The options are as follows: .Bl -tag -width file indent .It Fl c Check that the single input file is sorted. diff --git a/usr.bin/tee/tee.1 b/usr.bin/tee/tee.1 index 4f25e11864f..e0a446abbd4 100644 --- a/usr.bin/tee/tee.1 +++ b/usr.bin/tee/tee.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: tee.1,v 1.3 1998/10/30 00:24:38 aaron Exp $ +.\" $OpenBSD: tee.1,v 1.4 2000/03/05 00:28:55 aaron Exp $ .\" $NetBSD: tee.1,v 1.4 1994/12/09 01:43:37 jtc Exp $ .\" .\" Copyright (c) 1991, 1993 @@ -49,12 +49,12 @@ .Op Ar file ... .Sh DESCRIPTION The -.Nm tee +.Nm utility copies standard input to standard output, making a copy in zero or more files. The output is unbuffered. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl a Append the output to the files rather than @@ -73,18 +73,18 @@ A pathname of an output .El .Pp The -.Nm tee +.Nm utility takes the default action for all signals, except in the event of the .Fl i option. .Pp The -.Nm tee +.Nm utility exits 0 on success or >0 if an error occurred. .Sh STANDARDS The -.Nm tee +.Nm function is expected to be .Tn POSIX .St -p1003.2 diff --git a/usr.bin/tn3270/tn3270/tn3270.1 b/usr.bin/tn3270/tn3270/tn3270.1 index c926fa7c964..2075c75985d 100644 --- a/usr.bin/tn3270/tn3270/tn3270.1 +++ b/usr.bin/tn3270/tn3270/tn3270.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: tn3270.1,v 1.6 1999/06/05 01:21:44 aaron Exp $ +.\" $OpenBSD: tn3270.1,v 1.7 2000/03/05 00:28:58 aaron Exp $ .\" Copyright (c) 1986, 1990 The Regents of the University of California. .\" All rights reserved. .\" @@ -75,9 +75,7 @@ user interface (see which will, in certain circumstances, interpret and generate raw 3270 control streams. .Pp -The flags to -.Nm tn3270 -are as follows: +The options are as follows: .Bl -tag -width Fl .It Fl d Turn on socket-level tracing (for super-user only). diff --git a/usr.bin/touch/touch.1 b/usr.bin/touch/touch.1 index d95d3e75b6a..e7f82621586 100644 --- a/usr.bin/touch/touch.1 +++ b/usr.bin/touch/touch.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: touch.1,v 1.3 1998/10/30 00:24:40 aaron Exp $ +.\" $OpenBSD: touch.1,v 1.4 2000/03/05 00:28:55 aaron Exp $ .\" $NetBSD: touch.1,v 1.8 1995/08/31 22:10:05 jtc Exp $ .\" .\" Copyright (c) 1991, 1993 @@ -56,7 +56,7 @@ utility sets the modification and access times of files to the current time of day. If the file doesn't exist, it is created with default permissions. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl a Change the access time of the file. diff --git a/usr.bin/tr/tr.1 b/usr.bin/tr/tr.1 index 814620fdb5b..13b66a6c5ea 100644 --- a/usr.bin/tr/tr.1 +++ b/usr.bin/tr/tr.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: tr.1,v 1.4 1999/04/30 06:24:25 pjanzen Exp $ +.\" $OpenBSD: tr.1,v 1.5 2000/03/05 00:28:55 aaron Exp $ .\" $NetBSD: tr.1,v 1.5 1994/12/07 08:35:13 jtc Exp $ .\" .\" Copyright (c) 1991, 1993 @@ -65,7 +65,7 @@ The utility copies the standard input to the standard output with substitution or deletion of selected characters. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl c Complements the set of characters in diff --git a/usr.bin/ul/ul.1 b/usr.bin/ul/ul.1 index 4eead962602..96235c4db3b 100644 --- a/usr.bin/ul/ul.1 +++ b/usr.bin/ul/ul.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ul.1,v 1.4 1999/06/05 01:21:45 aaron Exp $ +.\" $OpenBSD: ul.1,v 1.5 2000/03/05 00:28:55 aaron Exp $ .\" $NetBSD: ul.1,v 1.3 1994/12/07 00:28:23 jtc Exp $ .\" .\" Copyright (c) 1980, 1991, 1993 @@ -46,7 +46,7 @@ .Op Fl t Ar terminal .Op Ar name Ar ... .Sh DESCRIPTION -.Nm ul +.Nm reads the named files (or standard input if none are given) and translates occurrences of underscores to the sequence which indicates underlining for the terminal in use, as specified @@ -59,12 +59,12 @@ If the terminal is incapable of underlining, but is capable of a standout mode, then that is used instead. If the terminal can overstrike, or handles underlining automatically, -.Nm ul +.Nm degenerates to .Xr cat 1 . If the terminal cannot underline, underlining is ignored. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl i Underlining is indicated by a separate line containing appropriate diff --git a/usr.bin/uname/uname.1 b/usr.bin/uname/uname.1 index 2101ece0a06..c31d99d6c71 100644 --- a/usr.bin/uname/uname.1 +++ b/usr.bin/uname/uname.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: uname.1,v 1.5 1999/06/05 01:21:45 aaron Exp $ +.\" $OpenBSD: uname.1,v 1.6 2000/03/05 00:28:55 aaron Exp $ .\" Copyright (c) 1990 The Regents of the University of California. .\" All rights reserved. .\" @@ -47,7 +47,7 @@ The utility writes symbols representing one or more system characteristics to the standard output. .Pp -The following options are available: +The options are as follows: .Bl -tag -width indent .It Fl a Behave as though all of the options diff --git a/usr.bin/uniq/uniq.1 b/usr.bin/uniq/uniq.1 index f46e9eb0dab..a9a0bd367bc 100644 --- a/usr.bin/uniq/uniq.1 +++ b/usr.bin/uniq/uniq.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: uniq.1,v 1.3 1998/10/30 00:24:41 aaron Exp $ +.\" $OpenBSD: uniq.1,v 1.4 2000/03/05 00:28:56 aaron Exp $ .\" $NetBSD: uniq.1,v 1.5 1994/12/06 07:51:15 jtc Exp $ .\" .\" Copyright (c) 1991, 1993 @@ -62,7 +62,7 @@ not written. Repeated lines in the input will not be detected if they are not adjacent, so it may be necessary to sort the files first. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl c Precede each output line with the count of the number of times the line diff --git a/usr.bin/wc/wc.1 b/usr.bin/wc/wc.1 index e64c7abf4d1..7da425e1678 100644 --- a/usr.bin/wc/wc.1 +++ b/usr.bin/wc/wc.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: wc.1,v 1.6 1999/10/17 19:59:47 aaron Exp $ +.\" $OpenBSD: wc.1,v 1.7 2000/03/05 00:28:56 aaron Exp $ .\" .\" Copyright (c) 1991, 1993 .\" The Regents of the University of California. All rights reserved. @@ -62,7 +62,7 @@ space. White space characters are the set of characters for which the .Xr isspace 3 function returns true. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl c The number of bytes in each input file diff --git a/usr.bin/yacc/yacc.1 b/usr.bin/yacc/yacc.1 index f301af343d0..31977fdfdb7 100644 --- a/usr.bin/yacc/yacc.1 +++ b/usr.bin/yacc/yacc.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: yacc.1,v 1.8 1999/10/05 21:13:43 aaron Exp $ +.\" $OpenBSD: yacc.1,v 1.9 2000/03/05 00:28:56 aaron Exp $ .\" Copyright (c) 1989, 1990 The Regents of the University of California. .\" All rights reserved. .\" @@ -65,7 +65,7 @@ written in the C programming language. normally writes the parse tables and the driver routine to the file .Pa y.tab.c . .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ar .It Fl b Ar prefix The diff --git a/usr.sbin/afs/afsd/afsd.8 b/usr.sbin/afs/afsd/afsd.8 index e5d9b02c678..df8b8c35f81 100644 --- a/usr.sbin/afs/afsd/afsd.8 +++ b/usr.sbin/afs/afsd/afsd.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: afsd.8,v 1.6 1999/10/11 21:12:20 aaron Exp $ +.\" $OpenBSD: afsd.8,v 1.7 2000/03/05 00:28:57 aaron Exp $ .\" .Dd September 5, 1998 .Dt AFSD 8 @@ -43,7 +43,7 @@ automatically started when .Xr mount_xfs 8 is run. .Pp -Available options are as follows: +The options are as follows: .Bl -tag -width Ds .It Xo .Fl t Ns , diff --git a/usr.sbin/apm/apm.8 b/usr.sbin/apm/apm.8 index 934c41efbe4..e4ea299d0d5 100644 --- a/usr.sbin/apm/apm.8 +++ b/usr.sbin/apm/apm.8 @@ -24,7 +24,7 @@ .\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.\" $Id: apm.8,v 1.8 1999/06/05 22:16:27 aaron Exp $ +.\" $Id: apm.8,v 1.9 2000/03/05 00:28:57 aaron Exp $ .\" .Dd March 18, 1996 .Dt APM 8 @@ -58,8 +58,7 @@ With no flags, .Nm displays the current power management state in verbose form. .Pp -Available options are as follows: -.Pp +The options are as follows: .Bl -tag -width indent .It Fl z Put the system into suspend (deep sleep) mode. diff --git a/usr.sbin/ipftest/ipftest.1 b/usr.sbin/ipftest/ipftest.1 index 8a55686242e..ba3fc96dd31 100644 --- a/usr.sbin/ipftest/ipftest.1 +++ b/usr.sbin/ipftest/ipftest.1 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ipftest.1,v 1.12 1999/11/13 19:48:31 ericj Exp $ +.\" $OpenBSD: ipftest.1,v 1.13 2000/03/05 00:28:51 aaron Exp $ .Dd May 23, 1999 .Dt IPFTEST 1 .Os @@ -70,7 +70,7 @@ in on le0 localhost 10.4.12.1 out on le0 tcp 10.4.12.1,2245 10.1.1.1,23 S .Ed .Pp -The following options are available: +The options are as follows: .Bl -tag -width Fl .It Fl v Verbose mode. This provides more information about which parts of rule diff --git a/usr.sbin/pstat/pstat.8 b/usr.sbin/pstat/pstat.8 index 306ece1b4b8..9096739b925 100644 --- a/usr.sbin/pstat/pstat.8 +++ b/usr.sbin/pstat/pstat.8 @@ -59,7 +59,7 @@ unless .Ar system is specified. .Pp -The following options are available: +The options are as follows: .Bl -tag -width Ds .It Fl T Prints the number of used and free slots for open files, used vnodes, and swap diff --git a/usr.sbin/sa/sa.8 b/usr.sbin/sa/sa.8 index 721caf05273..1b843ac850e 100644 --- a/usr.sbin/sa/sa.8 +++ b/usr.sbin/sa/sa.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: sa.8,v 1.7 1999/10/07 22:13:34 aaron Exp $ +.\" $OpenBSD: sa.8,v 1.8 2000/03/05 00:28:57 aaron Exp $ .\" .\" Copyright (c) 1994 Christopher G. Demetriou .\" All rights reserved. @@ -28,7 +28,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $Id: sa.8,v 1.7 1999/10/07 22:13:34 aaron Exp $ +.\" $Id: sa.8,v 1.8 2000/03/05 00:28:57 aaron Exp $ .\" .Dd February 25, 1994 .Dt SA 8 @@ -97,9 +97,7 @@ Total number of I/O operations. User time, in minutes. .El .Pp -The options to -.Nm -are as follows: +The options are as follows: .Bl -tag -width Ds .It Fl a List all command names, including those containing unprintable diff --git a/usr.sbin/sesd/sesd/sesd.8 b/usr.sbin/sesd/sesd/sesd.8 index 56d5bd4b872..110b25e964e 100644 --- a/usr.sbin/sesd/sesd/sesd.8 +++ b/usr.sbin/sesd/sesd/sesd.8 @@ -1,5 +1,5 @@ .\" $NetBSD: $ -.\" $OpenBSD: sesd.8,v 1.1 2000/02/21 08:45:15 mjacob Exp $ +.\" $OpenBSD: sesd.8,v 1.2 2000/03/05 00:28:51 aaron Exp $ .\" $FreeBSD: $ .\" .\" Copyright (c) 2000 Matthew Jacob @@ -56,7 +56,7 @@ When no other options are supplied, detached becomes a daemon, by default waking up every 30 seconds to poll each device for a change in state. .Pp -The following options may be used: +The options are as follows: .Bl -tag -width Ds .It Fl p Ar poll-interval Change the interval of polling from the default 30 seconds to the number diff --git a/usr.sbin/trpt/trpt.8 b/usr.sbin/trpt/trpt.8 index 20fdbc4e02b..b325354e1ae 100644 --- a/usr.sbin/trpt/trpt.8 +++ b/usr.sbin/trpt/trpt.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: trpt.8,v 1.9 1999/06/05 22:18:19 aaron Exp $ +.\" $OpenBSD: trpt.8,v 1.10 2000/03/05 00:28:51 aaron Exp $ .\" .\" Copyright (c) 1983, 1991, 1993 .\" The Regents of the University of California. All rights reserved. @@ -67,8 +67,8 @@ grouped according to connection protocol control block .Pq Tn PCB . -The following options may be used to -alter this behavior. +.Pp +The options are as follows: .Bl -tag -width Ds .It Fl a In addition to the normal output, @@ -89,7 +89,7 @@ In addition to the normal output, print a detailed description of the packet sequencing information. .It Fl t -in addition to the normal output, +In addition to the normal output, print the values for all timers at each point in the trace. .It Fl M Ar core diff --git a/usr.sbin/trsp/trsp.8 b/usr.sbin/trsp/trsp.8 index d4615d4518e..2f774d6b171 100644 --- a/usr.sbin/trsp/trsp.8 +++ b/usr.sbin/trsp/trsp.8 @@ -1,4 +1,4 @@ -.\" $OpenBSD: trsp.8,v 1.8 1999/06/05 22:18:20 aaron Exp $ +.\" $OpenBSD: trsp.8,v 1.9 2000/03/05 00:28:51 aaron Exp $ .\" .\" Copyright (c) 1985, 1991, 1993 .\" The Regents of the University of California. All rights reserved. @@ -67,8 +67,8 @@ grouped according to connection protocol control block .Pq Tn PCB . -The following options may be used to -alter this behavior. +.Pp +The options are as follows: .Bl -tag -width Ds .It Fl a In addition to the normal output, |