diff options
| -rw-r--r-- | sys/dev/pci/files.pci | 3 | ||||
| -rw-r--r-- | sys/dev/pci/if_ix.c | 300 | ||||
| -rw-r--r-- | sys/dev/pci/if_ix.h | 3 | ||||
| -rw-r--r-- | sys/dev/pci/ixgbe.h | 3 | ||||
| -rw-r--r-- | sys/dev/pci/ixgbe_82599.c | 2351 |
5 files changed, 2590 insertions, 70 deletions
diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci index d4fe0bad56d..db3cf298679 100644 --- a/sys/dev/pci/files.pci +++ b/sys/dev/pci/files.pci @@ -1,4 +1,4 @@ -# $OpenBSD: files.pci,v 1.269 2010/02/20 16:45:28 ratchov Exp $ +# $OpenBSD: files.pci,v 1.270 2010/02/23 18:43:15 jsg Exp $ # $NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $ # # Config file and device description for machine-independent PCI code. @@ -366,6 +366,7 @@ attach ix at pci file dev/pci/if_ix.c ix file dev/pci/ixgbe.c ix file dev/pci/ixgbe_82598.c ix +file dev/pci/ixgbe_82599.c ix file dev/pci/ixgbe_phy.c ix # Neterion Xframe 10 Gigabit ethernet diff --git a/sys/dev/pci/if_ix.c b/sys/dev/pci/if_ix.c index 45d21f5113b..58cba80dee4 100644 --- a/sys/dev/pci/if_ix.c +++ b/sys/dev/pci/if_ix.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_ix.c,v 1.35 2010/02/19 18:55:12 jsg Exp $ */ +/* $OpenBSD: if_ix.c,v 1.36 2010/02/23 18:43:15 jsg Exp $ */ /****************************************************************************** @@ -35,6 +35,7 @@ /*$FreeBSD: src/sys/dev/ixgbe/ixgbe.c,v 1.5 2008/05/16 18:46:30 jfv Exp $*/ #include <dev/pci/if_ix.h> +#include <dev/pci/ixgbe_type.h> /********************************************************************* * Driver version @@ -60,7 +61,13 @@ const struct pci_matchid ixgbe_devices[] = { { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82598EB_XF_LR }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82598EB_SFP }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82598_SR_DUAL_EM }, - { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82598_DA_DUAL } + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82598_DA_DUAL }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82599_KX4 }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82599_KX4_MEZZ }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82599_XAUI }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82599_COMBO_BACKPLANE }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82599_CX4 }, + { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82599_SFP } }; /********************************************************************* @@ -123,7 +130,7 @@ int ixgbe_dma_malloc(struct ix_softc *, bus_size_t, void ixgbe_dma_free(struct ix_softc *, struct ixgbe_dma_alloc *); int ixgbe_tx_ctx_setup(struct tx_ring *, struct mbuf *); int ixgbe_tso_setup(struct tx_ring *, struct mbuf *, uint32_t *); -void ixgbe_set_ivar(struct ix_softc *, uint16_t, uint8_t); +void ixgbe_set_ivar(struct ix_softc *, uint8_t, uint8_t, int8_t); void ixgbe_configure_ivars(struct ix_softc *); uint8_t *ixgbe_mc_array_itr(struct ixgbe_hw *, uint8_t **, uint32_t *); @@ -146,8 +153,7 @@ struct cfattach ix_ca = { sizeof(struct ix_softc), ixgbe_probe, ixgbe_attach, ixgbe_detach }; -/* Total number of Interfaces - need for config sanity check */ -static int ixgbe_total_ports; +int ixgbe_smart_speed = ixgbe_smart_speed_on; /********************************************************************* * Device identification routine @@ -183,7 +189,9 @@ ixgbe_attach(struct device *parent, struct device *self, void *aux) struct pci_attach_args *pa = (struct pci_attach_args *)aux; struct ix_softc *sc = (struct ix_softc *)self; int error = 0; + uint16_t csum; uint32_t ctrl_ext; + struct ixgbe_hw *hw = &sc->hw; INIT_DEBUGOUT("ixgbe_attach: begin"); @@ -214,18 +222,65 @@ ixgbe_attach(struct device *parent, struct device *self, void *aux) goto err_out; /* Initialize the shared code */ - sc->hw.mac.type = ixgbe_mac_82598EB; - if (ixgbe_init_ops_82598(&sc->hw) != 0) { - printf(": failed to init the 82598EB\n"); + if (hw->mac.type == ixgbe_mac_82598EB) + error = ixgbe_init_ops_82598(&sc->hw); + else + error = ixgbe_init_ops_82599(&sc->hw); + if (error == IXGBE_ERR_SFP_NOT_PRESENT) { + /* + * No optics in this port, set up + * so the timer routine will probe + * for later insertion. + */ + sc->sfp_probe = TRUE; + error = 0; + } else if (error == IXGBE_ERR_SFP_NOT_SUPPORTED) { + printf(": Unsupported SFP+ module detected!\n"); + error = EIO; + goto err_late; + } else if (error) { + printf(": Unable to initialize the shared code\n"); + error = EIO; goto err_late; } - /* Initialize the hardware */ - if (ixgbe_hardware_init(sc)) { - printf(": unable to initialize the hardware\n"); + /* Make sure we have a good EEPROM before we read from it */ + if (sc->hw.eeprom.ops.validate_checksum(&sc->hw, &csum) < 0) { + printf(": The EEPROM Checksum Is Not Valid\n"); + error = EIO; goto err_late; } + /* Pick up the smart speed setting */ + if (sc->hw.mac.type == ixgbe_mac_82599EB) + sc->hw.phy.smart_speed = ixgbe_smart_speed; + + /* Get Hardware Flow Control setting */ + hw->fc.requested_mode = ixgbe_fc_full; + hw->fc.pause_time = IXGBE_FC_PAUSE; + hw->fc.low_water = IXGBE_FC_LO; + hw->fc.high_water = IXGBE_FC_HI; + hw->fc.send_xon = TRUE; + + error = sc->hw.mac.ops.init_hw(hw); + if (error == IXGBE_ERR_EEPROM_VERSION) { + printf(": This device is a pre-production adapter/" + "LOM. Please be aware there may be issues associated " + "with your hardware.\n If you are experiencing problems " + "please contact your Intel or hardware representative " + "who provided you with this hardware.\n"); + } else if (error == IXGBE_ERR_SFP_NOT_SUPPORTED) { + printf("Unsupported SFP+ Module\n"); + } + + if (error) { + printf(": Hardware Initialization Failure\n"); + goto err_late; + } + + bcopy(sc->hw.mac.addr, sc->arpcom.ac_enaddr, + IXGBE_ETH_LENGTH_OF_ADDRESS); + /* XXX sc->msix > 1 && ixgbe_allocate_msix() */ error = ixgbe_allocate_legacy(sc); if (error) @@ -561,7 +616,9 @@ ixgbe_init(void *arg) { struct ix_softc *sc = (struct ix_softc *)arg; struct ifnet *ifp = &sc->arpcom.ac_if; - uint32_t txdctl, rxdctl, mhadd, gpie; + struct rx_ring *rxr = sc->rx_rings; + uint32_t k, txdctl, rxdctl, mhadd, gpie; + int err; int i, s; INIT_DEBUGOUT("ixgbe_init: begin"); @@ -576,13 +633,8 @@ ixgbe_init(void *arg) ixgbe_hw(&sc->hw, set_rar, 0, sc->hw.mac.addr, 0, 1); sc->hw.addr_ctrl.rar_used_count = 1; - /* Initialize the hardware */ - if (ixgbe_hardware_init(sc)) { - printf("%s: Unable to initialize the hardware\n", - ifp->if_xname); - splx(s); - return; - } + /* Do a warm reset */ + sc->hw.mac.ops.reset_hw(&sc->hw); if (ifp->if_capabilities & IFCAP_VLAN_HWTAGGING) ixgbe_enable_hw_vlans(sc); @@ -620,6 +672,12 @@ ixgbe_init(void *arg) ixgbe_initialize_receive_units(sc); gpie = IXGBE_READ_REG(&sc->hw, IXGBE_GPIE); + + if (sc->hw.mac.type == ixgbe_mac_82599EB) { + gpie |= IXGBE_SDP1_GPIEN; + gpie |= IXGBE_SDP2_GPIEN; + } + /* Enable Fan Failure Interrupt */ if (sc->hw.phy.media_type == ixgbe_media_type_copper) gpie |= IXGBE_SDP1_GPIEN; @@ -651,16 +709,46 @@ ixgbe_init(void *arg) for (i = 0; i < sc->num_rx_queues; i++) { rxdctl = IXGBE_READ_REG(&sc->hw, IXGBE_RXDCTL(i)); - /* PTHRESH set to 32 */ - rxdctl |= 0x0020; + if (sc->hw.mac.type == ixgbe_mac_82598EB) { + /* PTHRESH set to 32 */ + rxdctl |= 0x0020; + } rxdctl |= IXGBE_RXDCTL_ENABLE; IXGBE_WRITE_REG(&sc->hw, IXGBE_RXDCTL(i), rxdctl); + for (k = 0; k < 10; k++) { + if (IXGBE_READ_REG(&sc->hw, IXGBE_RXDCTL(i)) & + IXGBE_RXDCTL_ENABLE) + break; + else + msec_delay(1); + } + IXGBE_WRITE_REG(&sc->hw, IXGBE_RDT(i), rxr->last_rx_desc_filled); } timeout_add_sec(&sc->timer, 1); +#ifdef MSI /* Set up MSI/X routing */ - ixgbe_configure_ivars(sc); + if (ixgbe_enable_msix) + ixgbe_configure_ivars(sc); + else /* Simple settings for Legacy/MSI */ +#else + { + ixgbe_set_ivar(sc, 0, 0, 0); + ixgbe_set_ivar(sc, 0, 0, 1); + } +#endif + + /* + * Check on any SFP devices that + * need to be kick-started + */ + err = sc->hw.phy.ops.identify(&sc->hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + printf("Unsupported SFP+ module type was detected.\n"); + splx(s); + return; + } ixgbe_enable_intr(sc); @@ -798,9 +886,7 @@ ixgbe_encap(struct tx_ring *txr, struct mbuf *m_head) bus_dmamap_t map; struct ixgbe_tx_buf *txbuf, *txbuf_mapped; union ixgbe_adv_tx_desc *txd = NULL; -#ifdef notyet uint32_t paylen = 0; -#endif /* Basic descriptor defines */ cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA; @@ -873,6 +959,11 @@ ixgbe_encap(struct tx_ring *txr, struct mbuf *m_head) if (ixgbe_tx_ctx_setup(txr, m_head)) olinfo_status |= IXGBE_TXD_POPTS_IXSM << 8; + /* Record payload length */ + if (paylen == 0) + olinfo_status |= m_head->m_pkthdr.len << + IXGBE_ADVTXD_PAYLEN_SHIFT; + i = txr->next_avail_tx_desc; for (j = 0; j < map->dm_nsegs; j++) { txbuf = &txr->tx_buffers[i]; @@ -888,20 +979,10 @@ ixgbe_encap(struct tx_ring *txr, struct mbuf *m_head) i = 0; txbuf->m_head = NULL; - - /* - * we have to do this inside the loop right now - * because of the hardware workaround. - */ - if (j == (map->dm_nsegs -1)) /* Last descriptor gets EOP and RS */ - txd->read.cmd_type_len |= - htole32(IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS); -#ifndef NO_82598_A0_SUPPORT - if (sc->hw.revision_id == 0) - desc_flip(txd); -#endif } + txd->read.cmd_type_len |= + htole32(IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS); txr->tx_avail -= map->dm_nsegs; txr->next_avail_tx_desc = i; @@ -1166,31 +1247,49 @@ ixgbe_identify_hardware(struct ix_softc *sc) sc->hw.subsystem_vendor_id = PCI_VENDOR(reg); sc->hw.subsystem_device_id = PCI_PRODUCT(reg); - ixgbe_total_ports++; - switch (sc->hw.device_id) { - case PCI_PRODUCT_INTEL_82598AF_DUAL: - case PCI_PRODUCT_INTEL_82598EB_CX4_DUAL: - case PCI_PRODUCT_INTEL_82598AT_DUAL: - ixgbe_total_ports++; - break; - } - switch (sc->hw.device_id) { + case PCI_PRODUCT_INTEL_82598: case PCI_PRODUCT_INTEL_82598AF_DUAL: + case PCI_PRODUCT_INTEL_82598_DA_DUAL: case PCI_PRODUCT_INTEL_82598AF: + case PCI_PRODUCT_INTEL_82598_SR_DUAL_EM: + case PCI_PRODUCT_INTEL_82598EB_SFP: + sc->hw.mac.type = ixgbe_mac_82598EB; sc->optics = IFM_10G_SR; break; case PCI_PRODUCT_INTEL_82598EB_CX4_DUAL: case PCI_PRODUCT_INTEL_82598EB_CX4: + sc->hw.mac.type = ixgbe_mac_82598EB; sc->optics = IFM_10G_CX4; break; case PCI_PRODUCT_INTEL_82598EB_XF_LR: + sc->hw.mac.type = ixgbe_mac_82598EB; sc->optics = IFM_10G_LR; break; case PCI_PRODUCT_INTEL_82598AT_DUAL: case PCI_PRODUCT_INTEL_82598AT: + sc->hw.mac.type = ixgbe_mac_82598EB; sc->optics = IFM_10G_T; break; + case PCI_PRODUCT_INTEL_82598_BX: + sc->hw.mac.type = ixgbe_mac_82598EB; + sc->optics = IFM_AUTO; + break; + case PCI_PRODUCT_INTEL_82599_SFP: + sc->hw.mac.type = ixgbe_mac_82599EB; + sc->optics = IFM_10G_SR; + break; + case PCI_PRODUCT_INTEL_82599_KX4: + case PCI_PRODUCT_INTEL_82599_KX4_MEZZ: + case PCI_PRODUCT_INTEL_82599_CX4: + sc->hw.mac.type = ixgbe_mac_82599EB; + sc->optics = IFM_10G_CX4; + break; + case PCI_PRODUCT_INTEL_82599_XAUI: + case PCI_PRODUCT_INTEL_82599_COMBO_BACKPLANE: + sc->hw.mac.type = ixgbe_mac_82599EB; + sc->optics = IFM_AUTO; + break; default: sc->optics = IFM_AUTO; break; @@ -1321,6 +1420,10 @@ ixgbe_hardware_init(struct ix_softc *sc) return (EIO); } + /* Pick up the smart speed setting */ + if (sc->hw.mac.type == ixgbe_mac_82599EB) + sc->hw.phy.smart_speed = ixgbe_smart_speed; + /* Get Hardware Flow Control setting */ sc->hw.fc.requested_mode = ixgbe_fc_full; sc->hw.fc.pause_time = IXGBE_FC_PAUSE; @@ -1751,6 +1854,20 @@ ixgbe_initialize_transmit_units(struct ix_softc *sc) } ifp->if_timer = 0; + if (hw->mac.type == ixgbe_mac_82599EB) { + uint32_t dmatxctl, rttdcs; + dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); + dmatxctl |= IXGBE_DMATXCTL_TE; + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl); + /* Disable arbiter to set MTQC */ + rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + rttdcs |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB); + rttdcs &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + } + return; } @@ -2495,7 +2612,10 @@ ixgbe_initialize_receive_units(struct ix_softc *sc) IXGBE_WRITE_REG(&sc->hw, IXGBE_RXCSUM, rxcsum); /* Enable Receive engine */ - rxctrl |= (IXGBE_RXCTRL_RXEN | IXGBE_RXCTRL_DMBYPS); + rxctrl = IXGBE_READ_REG(&sc->hw, IXGBE_RXCTRL); + if (sc->hw.mac.type == ixgbe_mac_82598EB) + rxctrl |= IXGBE_RXCTRL_DMBYPS; + rxctrl |= IXGBE_RXCTRL_RXEN; IXGBE_WRITE_REG(&sc->hw, IXGBE_RXCTRL, rxctrl); return; @@ -2769,7 +2889,8 @@ ixgbe_enable_hw_vlans(struct ix_softc *sc) ixgbe_disable_intr(sc); ctrl = IXGBE_READ_REG(&sc->hw, IXGBE_VLNCTRL); - ctrl |= IXGBE_VLNCTRL_VME; + if (sc->hw.mac.type == ixgbe_mac_82598EB) + ctrl |= IXGBE_VLNCTRL_VME; ctrl &= ~IXGBE_VLNCTRL_CFIEN; ctrl &= ~IXGBE_VLNCTRL_VFE; IXGBE_WRITE_REG(&sc->hw, IXGBE_VLNCTRL, ctrl); @@ -2785,6 +2906,14 @@ ixgbe_enable_intr(struct ix_softc *sc) /* Enable Fan Failure detection */ if (hw->phy.media_type == ixgbe_media_type_copper) mask |= IXGBE_EIMS_GPI_SDP1; + + /* 82599 specific interrupts */ + if (sc->hw.mac.type == ixgbe_mac_82599EB) { + mask |= IXGBE_EIMS_ECC; + mask |= IXGBE_EIMS_GPI_SDP1; + mask |= IXGBE_EIMS_GPI_SDP2; + } + /* With RSS we use auto clear */ if (sc->msix_mem) { /* Dont autoclear Link */ @@ -2805,7 +2934,13 @@ ixgbe_disable_intr(struct ix_softc *sc) { if (sc->msix_mem) IXGBE_WRITE_REG(&sc->hw, IXGBE_EIAC, 0); - IXGBE_WRITE_REG(&sc->hw, IXGBE_EIMC, ~0); + if (sc->hw.mac.type == ixgbe_mac_82598EB) { + IXGBE_WRITE_REG(&sc->hw, IXGBE_EIMC, ~0); + } else { + IXGBE_WRITE_REG(&sc->hw, IXGBE_EIMC, 0xFFFF0000); + IXGBE_WRITE_REG(&sc->hw, IXGBE_EIMC_EX(0), ~0); + IXGBE_WRITE_REG(&sc->hw, IXGBE_EIMC_EX(1), ~0); + } IXGBE_WRITE_FLUSH(&sc->hw); return; } @@ -2835,17 +2970,53 @@ ixgbe_write_pci_cfg(struct ixgbe_hw *hw, uint32_t reg, uint16_t value) pci_conf_write(pa->pa_pc, pa->pa_tag, reg, value); } +/* + * Setup the correct IVAR register for a particular MSIX interrupt + * (yes this is all very magic and confusing :) + * - entry is the register array entry + * - vector is the MSIX vector for this queue + * - type is RX/TX/MISC + */ void -ixgbe_set_ivar(struct ix_softc *sc, uint16_t entry, uint8_t vector) +ixgbe_set_ivar(struct ix_softc *sc, uint8_t entry, uint8_t vector, int8_t type) { + struct ixgbe_hw *hw = &sc->hw; uint32_t ivar, index; vector |= IXGBE_IVAR_ALLOC_VAL; - index = (entry >> 2) & 0x1F; - ivar = IXGBE_READ_REG(&sc->hw, IXGBE_IVAR(index)); - ivar &= ~(0xFF << (8 * (entry & 0x3))); - ivar |= (vector << (8 * (entry & 0x3))); - IXGBE_WRITE_REG(&sc->hw, IXGBE_IVAR(index), ivar); + + switch (hw->mac.type) { + + case ixgbe_mac_82598EB: + if (type == -1) + entry = IXGBE_IVAR_OTHER_CAUSES_INDEX; + else + entry += (type * 64); + index = (entry >> 2) & 0x1F; + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index)); + ivar &= ~(0xFF << (8 * (entry & 0x3))); + ivar |= (vector << (8 * (entry & 0x3))); + IXGBE_WRITE_REG(&sc->hw, IXGBE_IVAR(index), ivar); + break; + + case ixgbe_mac_82599EB: + if (type == -1) { /* MISC IVAR */ + index = (entry & 1) * 8; + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC); + ivar &= ~(0xFF << index); + ivar |= (vector << index); + IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar); + } else { /* RX/TX IVARS */ + index = (16 * (entry & 1)) + (8 * type); + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(entry >> 1)); + ivar &= ~(0xFF << index); + ivar |= (vector << index); + IXGBE_WRITE_REG(hw, IXGBE_IVAR(entry >> 1), ivar); + } + + default: + break; + } } void @@ -2853,22 +3024,16 @@ ixgbe_configure_ivars(struct ix_softc *sc) { struct tx_ring *txr = sc->tx_rings; struct rx_ring *rxr = sc->rx_rings; - int i; + int i; - for (i = 0; i < sc->num_rx_queues; i++, rxr++) { - ixgbe_set_ivar(sc, IXGBE_IVAR_RX_QUEUE(i), rxr->msix); - sc->eims_mask |= rxr->eims; - } + for (i = 0; i < sc->num_rx_queues; i++, rxr++) + ixgbe_set_ivar(sc, i, rxr->msix, 0); - for (i = 0; i < sc->num_tx_queues; i++, txr++) { - ixgbe_set_ivar(sc, IXGBE_IVAR_TX_QUEUE(i), txr->msix); - sc->eims_mask |= txr->eims; - } + for (i = 0; i < sc->num_tx_queues; i++, txr++) + ixgbe_set_ivar(sc, i, txr->msix, 1); /* For the Link interrupt */ - ixgbe_set_ivar(sc, IXGBE_IVAR_OTHER_CAUSES_INDEX, - sc->linkvec); - sc->eims_mask |= IXGBE_IVAR_OTHER_CAUSES_INDEX; + ixgbe_set_ivar(sc, 1, sc->linkvec, -1); } /********************************************************************** @@ -2891,7 +3056,8 @@ ixgbe_update_stats_counters(struct ix_softc *sc) mp = IXGBE_READ_REG(hw, IXGBE_MPC(i)); missed_rx += mp; sc->stats.mpc[i] += mp; - sc->stats.rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + if (hw->mac.type == ixgbe_mac_82598EB) + sc->stats.rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); } /* Hardware workaround, gprc counts missed packets */ diff --git a/sys/dev/pci/if_ix.h b/sys/dev/pci/if_ix.h index 4add40646ca..09b98dbd38a 100644 --- a/sys/dev/pci/if_ix.h +++ b/sys/dev/pci/if_ix.h @@ -1,4 +1,4 @@ -/* $OpenBSD: if_ix.h,v 1.8 2009/08/10 19:41:05 deraadt Exp $ */ +/* $OpenBSD: if_ix.h,v 1.9 2010/02/23 18:43:15 jsg Exp $ */ /****************************************************************************** @@ -259,6 +259,7 @@ struct ix_softc { struct mutex core_mtx; /* Legacy Fast Intr handling */ + int sfp_probe; workq_fn link_task; /* Info about the board itself */ diff --git a/sys/dev/pci/ixgbe.h b/sys/dev/pci/ixgbe.h index ca86561ab77..c09791aa0c9 100644 --- a/sys/dev/pci/ixgbe.h +++ b/sys/dev/pci/ixgbe.h @@ -1,4 +1,4 @@ -/* $OpenBSD: ixgbe.h,v 1.5 2010/02/19 18:55:12 jsg Exp $ */ +/* $OpenBSD: ixgbe.h,v 1.6 2010/02/23 18:43:15 jsg Exp $ */ /****************************************************************************** @@ -225,6 +225,7 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, uint8_t *addr, uint32_t vmdq); void ixgbe_set_mta(struct ixgbe_hw *hw, uint8_t *mc_addr); int32_t ixgbe_init_ops_82598(struct ixgbe_hw *hw); +int32_t ixgbe_init_ops_82599(struct ixgbe_hw *hw); /* PHY */ int32_t ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); diff --git a/sys/dev/pci/ixgbe_82599.c b/sys/dev/pci/ixgbe_82599.c new file mode 100644 index 00000000000..a9d0f4a638a --- /dev/null +++ b/sys/dev/pci/ixgbe_82599.c @@ -0,0 +1,2351 @@ +/* $OpenBSD: ixgbe_82599.c,v 1.1 2010/02/23 18:43:15 jsg Exp $ */ + +/****************************************************************************** + + Copyright (c) 2001-2009, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD: src/sys/dev/ixgbe/ixgbe_82599.c,v 1.3 2009/12/07 21:30:54 jfv Exp $*/ + +#include <dev/pci/ixgbe.h> +#include <dev/pci/ixgbe_type.h> + +int32_t ixgbe_init_ops_82599(struct ixgbe_hw *hw); +int32_t ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + int *autoneg); +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw); +int32_t ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, int autoneg, + int autoneg_wait_to_complete); +int32_t ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, int autoneg, + int autoneg_wait_to_complete); +int32_t ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + int autoneg_wait_to_complete); +int32_t ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + int autoneg, + int autoneg_wait_to_complete); +int32_t ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + int autoneg, + int autoneg_wait_to_complete); +int32_t ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw); +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw); +int32_t ixgbe_reset_hw_82599(struct ixgbe_hw *hw); +int32_t ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, uint32_t reg, uint8_t *val); +int32_t ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, uint32_t reg, uint8_t val); +int32_t ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw); +int32_t ixgbe_identify_phy_82599(struct ixgbe_hw *hw); +int32_t ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw); +uint32_t ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); +int32_t ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, uint32_t regval); +int32_t ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, uint16_t *device_caps); +int32_t ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); + +int32_t ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw); +int32_t ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, uint32_t pballoc); +int32_t ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, uint32_t pballoc); +int32_t ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + struct ixgbe_atr_input *input, + uint8_t queue); +int32_t ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, + struct ixgbe_atr_input *input, + uint16_t soft_id, + uint8_t queue); +uint16_t ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *input, uint32_t key); +int32_t ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, uint16_t vlan_id); +int32_t ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, uint32_t src_addr); +int32_t ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, uint32_t dst_addr); +int32_t ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input, uint32_t src_addr_1, + uint32_t src_addr_2, uint32_t src_addr_3, + uint32_t src_addr_4); +int32_t ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input, uint32_t dst_addr_1, + uint32_t dst_addr_2, uint32_t dst_addr_3, + uint32_t dst_addr_4); +int32_t ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, uint16_t src_port); +int32_t ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, uint16_t dst_port); +int32_t ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, uint16_t flex_byte); +int32_t ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input, uint8_t vm_pool); +int32_t ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, uint8_t l4type); +int32_t ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, uint16_t *vlan_id); +int32_t ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input, uint32_t *src_addr); +int32_t ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input, uint32_t *dst_addr); +int32_t ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input, uint32_t *src_addr_1, + uint32_t *src_addr_2, uint32_t *src_addr_3, + uint32_t *src_addr_4); +int32_t ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input, uint32_t *dst_addr_1, + uint32_t *dst_addr_2, uint32_t *dst_addr_3, + uint32_t *dst_addr_4); +int32_t ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input, uint16_t *src_port); +int32_t ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input, uint16_t *dst_port); +int32_t ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input, + uint16_t *flex_byte); +int32_t ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input, uint8_t *vm_pool); +int32_t ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input, uint8_t *l4type); + + +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + DEBUGFUNC("ixgbe_init_mac_link_ops_82599"); + + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + } else { + if ((ixgbe_get_media_type_82599(hw) == ixgbe_media_type_backplane) && + (hw->phy.smart_speed == ixgbe_smart_speed_auto || + hw->phy.smart_speed == ixgbe_smart_speed_on)) + mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; + else + mac->ops.setup_link = &ixgbe_setup_mac_link_82599; + } +} + +/** + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +int32_t ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + int32_t ret_val = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_init_phy_ops_82599"); + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto init_phy_ops_out; + + /* Setup function pointers based on detected SFP module and speeds */ + ixgbe_init_mac_link_ops_82599(hw); + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) + hw->phy.ops.reset = NULL; + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + /* Set necessary function pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + case ixgbe_phy_aq: + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_generic; + break; + default: + break; + } +init_phy_ops_out: + return ret_val; +} + +int32_t ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + int32_t ret_val = IXGBE_SUCCESS; + uint16_t list_offset, data_offset, data_value; + + DEBUGFUNC("ixgbe_setup_sfp_modules_82599"); + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + + hw->phy.ops.reset = NULL; + + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != IXGBE_SUCCESS) + goto setup_sfp_out; + + /* PHY config will finish before releasing the semaphore */ + ret_val = ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + if (ret_val != IXGBE_SUCCESS) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto setup_sfp_out; + } + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + /* Now restart DSP by setting Restart_AN */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, + (IXGBE_READ_REG(hw, IXGBE_AUTOC) | IXGBE_AUTOC_AN_RESTART)); + + /* Release the semaphore */ + ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + /* Delay obtaining semaphore again to allow FW access */ + msec_delay(hw->eeprom.semaphore_delay); + } + +setup_sfp_out: + return ret_val; +} + +/** + * ixgbe_init_ops_82599 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure + * + * Initialize the function pointers and assign the MAC type for 82599. + * Does not touch the hardware. + **/ + +int32_t ixgbe_init_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + int32_t ret_val; + + DEBUGFUNC("ixgbe_init_ops_82599"); + + ret_val = ixgbe_init_phy_ops_generic(hw); + ret_val = ixgbe_init_ops_generic(hw); + + /* PHY */ + phy->ops.identify = &ixgbe_identify_phy_82599; + phy->ops.init = &ixgbe_init_phy_ops_82599; + + /* MAC */ + mac->ops.reset_hw = &ixgbe_reset_hw_82599; + mac->ops.get_media_type = &ixgbe_get_media_type_82599; + mac->ops.get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_82599; + mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599; + mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599; + mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599; + mac->ops.start_hw = &ixgbe_start_hw_rev_1_82599; + mac->ops.get_device_caps = &ixgbe_get_device_caps_82599; + + /* RAR, Multicast, VLAN */ + mac->ops.set_vmdq = &ixgbe_set_vmdq_generic; + mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic; + mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic; + mac->rar_highwater = 1; + mac->ops.set_vfta = &ixgbe_set_vfta_generic; + mac->ops.clear_vfta = &ixgbe_clear_vfta_generic; + mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic; + mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599; + + /* Link */ + mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599; + mac->ops.check_link = &ixgbe_check_mac_link_generic; + ixgbe_init_mac_link_ops_82599(hw); + + mac->mcft_size = 128; + mac->vft_size = 128; + mac->num_rar_entries = 128; + mac->max_tx_queues = 128; + mac->max_rx_queues = 128; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: TRUE when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +int32_t ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + int *negotiation) +{ + int32_t status = IXGBE_SUCCESS; + uint32_t autoc = 0; + + DEBUGFUNC("ixgbe_get_link_capabilities_82599"); + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not + * been stored, use the current register values. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = FALSE; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = FALSE; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = FALSE; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = FALSE; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + } + +out: + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + DEBUGFUNC("ixgbe_get_media_type_82599"); + + /* Detect if there is a copper PHY attached. */ + if (hw->phy.type == ixgbe_phy_cu_unknown || + hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq) { + media_type = ixgbe_media_type_copper; + goto out; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + case IXGBE_DEV_ID_82599_XAUI_LOM: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82599_CX4: + media_type = ixgbe_media_type_cx4; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_start_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +int32_t ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + int autoneg_wait_to_complete) +{ + uint32_t autoc_reg; + uint32_t links_reg; + uint32_t i; + int32_t status = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_start_mac_link_82599"); + + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN + || (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msec_delay(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + DEBUGOUT("Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msec_delay(50); + + return status; +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * @autoneg_wait_to_complete: TRUE when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +int32_t ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, int autoneg, + int autoneg_wait_to_complete) +{ + int32_t status = IXGBE_SUCCESS; + ixgbe_link_speed link_speed; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + uint32_t speedcnt = 0; + uint32_t esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + uint32_t i = 0; + int link_up = FALSE; + int negotiation; + + DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber"); + + /* Mask off requested but non-supported speeds */ + status = ixgbe_get_link_capabilities_82599(hw, &link_speed, &negotiation); + if (status != IXGBE_SUCCESS) + return status; + + speed &= link_speed; + + /* + * When the driver changes the link speeds that it can support, + * it sets autotry_restart to TRUE to indicate that we need to + * initiate a new autotry session with the link partner. To do + * so, we set the speed then disable and re-enable the tx laser, to + * alert the link partner that it also needs to restart autotry on its + * end. This is consistent with TRUE clause 37 autoneg, which also + * involves a loss of signal. + */ + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = ixgbe_check_mac_link_generic(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + /* Allow module to change analog characteristics (1G->10G) */ + msec_delay(40); + + status = ixgbe_setup_mac_link_82599( + hw, IXGBE_LINK_SPEED_10GB_FULL, autoneg, + autoneg_wait_to_complete); + if (status != IXGBE_SUCCESS) + return status; + + /* Flap the tx laser if it has not already been done */ + if (hw->mac.autotry_restart) { + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + usec_delay(100); + + /* Enable tx laser; allow 2ms to light up per spec */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + msec_delay(2); + + hw->mac.autotry_restart = FALSE; + } + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted. 82599 uses the same timing for 10g SFI. + */ + for (i = 0; i < 5; i++) { + /* Wait for the link partner to also set speed */ + msec_delay(100); + + /* If we have link, just jump out */ + status = ixgbe_check_mac_link_generic(hw, &link_speed, + &link_up, FALSE); + if (status != IXGBE_SUCCESS) + return status; + + if (link_up) + goto out; + } + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = ixgbe_check_mac_link_generic(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + /* Allow module to change analog characteristics (10G->1G) */ + msec_delay(40); + + status = ixgbe_setup_mac_link_82599( + hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg, + autoneg_wait_to_complete); + if (status != IXGBE_SUCCESS) + return status; + + /* Flap the tx laser if it has not already been done */ + if (hw->mac.autotry_restart) { + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + usec_delay(100); + + /* Enable tx laser; allow 2ms to light up per spec */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + msec_delay(2); + + hw->mac.autotry_restart = FALSE; + } + + /* Wait for the link partner to also set speed */ + msec_delay(100); + + /* If we have link, just jump out */ + status = ixgbe_check_mac_link_generic(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + return status; + + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, autoneg, autoneg_wait_to_complete); + +out: + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + return status; +} + +/** + * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * @autoneg_wait_to_complete: TRUE when waiting for completion is needed + * + * Implements the Intel SmartSpeed algorithm. + **/ +int32_t ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, int autoneg, + int autoneg_wait_to_complete) +{ + int32_t status = IXGBE_SUCCESS; + ixgbe_link_speed link_speed; + int32_t i, j; + int link_up = FALSE; + uint32_t autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + DEBUGFUNC("ixgbe_setup_mac_link_smartspeed"); + + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* + * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the + * autoneg advertisement if link is unable to be established at the + * highest negotiated rate. This can sometimes happen due to integrity + * issues with the physical media connection. + */ + + /* First, try to get link with full advertisement */ + hw->phy.smart_speed_active = FALSE; + for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != IXGBE_SUCCESS) + goto out; + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per + * Table 9 in the AN MAS. + */ + for (i = 0; i < 5; i++) { + msec_delay(100); + + /* If we have link, just jump out */ + status = ixgbe_check_mac_link_generic(hw, &link_speed, &link_up, + FALSE); + if (status != IXGBE_SUCCESS) + goto out; + + if (link_up) + goto out; + } + } + + /* + * We didn't get link. If we advertised KR plus one of KX4/KX + * (or BX4/BX), then disable KR and try again. + */ + if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || + ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) + goto out; + + /* Turn SmartSpeed on to disable KR support */ + hw->phy.smart_speed_active = TRUE; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != IXGBE_SUCCESS) + goto out; + + /* + * Wait for the controller to acquire link. 600ms will allow for + * the AN link_fail_inhibit_timer as well for multiple cycles of + * parallel detect, both 10g and 1g. This allows for the maximum + * connect attempts as defined in the AN MAS table 73-7. + */ + for (i = 0; i < 6; i++) { + msec_delay(100); + + /* If we have link, just jump out */ + status = ixgbe_check_mac_link_generic(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + goto out; + + if (link_up) + goto out; + } + + /* We didn't get link. Turn SmartSpeed back off. */ + hw->phy.smart_speed_active = FALSE; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + +out: + return status; +} + +/** + * ixgbe_setup_mac_link_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * @autoneg_wait_to_complete: TRUE when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +int32_t ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, int autoneg, + int autoneg_wait_to_complete) +{ + int32_t status = IXGBE_SUCCESS; + uint32_t autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + uint32_t autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + uint32_t start_autoc = autoc; + uint32_t orig_autoc = 0; + uint32_t link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + uint32_t pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + uint32_t pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + uint32_t links_reg; + uint32_t i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + DEBUGFUNC("ixgbe_setup_mac_link_82599"); + + /* Check to see if speed passed in is supported. */ + status = ixgbe_get_link_capabilities_82599(hw, &link_capabilities, &autoneg); + if (status != IXGBE_SUCCESS) + goto out; + + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + goto out; + } + + /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ + if (hw->mac.orig_link_settings_stored) + orig_autoc = hw->mac.orig_autoc; + else + orig_autoc = autoc; + + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && + (hw->phy.smart_speed_active == FALSE)) + autoc |= IXGBE_AUTOC_KR_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (autoc != start_autoc) { + + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /*Just in case Autoneg time=0*/ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msec_delay(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + DEBUGOUT("Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msec_delay(50); + } + +out: + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * @autoneg_wait_to_complete: TRUE if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +int32_t ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + int autoneg, + int autoneg_wait_to_complete) +{ + int32_t status; + + DEBUGFUNC("ixgbe_setup_copper_link_82599"); + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); + + return status; +} +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +int32_t ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ + int32_t status = IXGBE_SUCCESS; + uint32_t ctrl, ctrl_ext; + uint32_t i; + uint32_t autoc; + uint32_t autoc2; + + DEBUGFUNC("ixgbe_reset_hw_82599"); + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* PHY ops must be identified and initialized prior to reset */ + + /* Identify PHY and related function pointers */ + status = hw->phy.ops.init(hw); + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = FALSE; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Reset PHY */ + if (hw->phy.reset_disable == FALSE && hw->phy.ops.reset != NULL) + hw->phy.ops.reset(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + status = ixgbe_disable_pcie_master(hw); + if (status != IXGBE_SUCCESS) { + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + } + + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + usec_delay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + DEBUGOUT("Reset polling failed to complete.\n"); + } + /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + + msec_delay(50); + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == FALSE) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = TRUE; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + +reset_hw_out: + return status; +} + +/** + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure + **/ +int32_t ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) +{ + int i; + uint32_t fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; + + DEBUGFUNC("ixgbe_reinit_fdir_tables_82599"); + + /* + * Before starting reinitialization process, + * FDIRCMD.CMD must be zero. + */ + for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { + if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + IXGBE_FDIRCMD_CMD_MASK)) + break; + usec_delay(10); + } + if (i >= IXGBE_FDIRCMD_CMD_POLL) { + DEBUGOUT("Flow Director previous command isn't complete, " + "aborting table re-initialization. \n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); + IXGBE_WRITE_FLUSH(hw); + /* + * 82599 adapters flow director init flow cannot be restarted, + * Workaround 82599 silicon errata by performing the following steps + * before re-writing the FDIRCTRL control register with the same value. + * - write 1 to bit 8 of FDIRCMD register & + * - write 0 to bit 8 of FDIRCMD register + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | + IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + ~IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + /* + * Clear FDIR Hash register to clear any leftover hashes + * waiting to be programmed. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); + IXGBE_WRITE_FLUSH(hw); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll init-done after we write FDIRCTRL register */ + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + usec_delay(10); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) { + DEBUGOUT("Flow Director Signature poll time exceeded!\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + /* Clear FDIR statistics registers (read to clear) */ + IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); + IXGBE_READ_REG(hw, IXGBE_FDIRMISS); + IXGBE_READ_REG(hw, IXGBE_FDIRLEN); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters + * @hw: pointer to hardware structure + * @pballoc: which mode to allocate filters with + **/ +int32_t ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, uint32_t pballoc) +{ + uint32_t fdirctrl = 0; + uint32_t pbsize; + int i; + + DEBUGFUNC("ixgbe_init_fdir_signature_82599"); + + /* + * Before enabling Flow Director, the Rx Packet Buffer size + * must be reduced. The new value is the current size minus + * flow director memory usage size. + */ + pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc)); + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), + (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize)); + + /* + * The defaults in the HW for RX PB 1-7 are not zero and so should be + * intialized to zero for non DCB mode otherwise actual total RX PB + * would be bigger than programmed and filter space would run into + * the PB 0 region. + */ + for (i = 1; i < 8; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); + + /* Send interrupt when 64 filters are left */ + fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT; + + /* Set the maximum length per hash bucket to 0xA filters */ + fdirctrl |= 0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT; + + switch (pballoc) { + case IXGBE_FDIR_PBALLOC_64K: + /* 8k - 1 signature filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K; + break; + case IXGBE_FDIR_PBALLOC_128K: + /* 16k - 1 signature filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K; + break; + case IXGBE_FDIR_PBALLOC_256K: + /* 32k - 1 signature filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K; + break; + default: + /* bad value */ + return IXGBE_ERR_CONFIG; + }; + + /* Move the flexible bytes to use the ethertype - shift 6 words */ + fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT); + + + /* Prime the keys for hashing */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, + htonl(IXGBE_ATR_BUCKET_HASH_KEY)); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, + htonl(IXGBE_ATR_SIGNATURE_HASH_KEY)); + + /* + * Poll init-done after we write the register. Estimated times: + * 10G: PBALLOC = 11b, timing is 60us + * 1G: PBALLOC = 11b, timing is 600us + * 100M: PBALLOC = 11b, timing is 6ms + * + * Multiple these timings by 4 if under full Rx load + * + * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for + * 1 msec per poll time. If we're at line rate and drop to 100M, then + * this might not finish in our poll time, but we can live with that + * for now. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + msec_delay(1); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) + DEBUGOUT("Flow Director Signature poll time exceeded!\n"); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters + * @hw: pointer to hardware structure + * @pballoc: which mode to allocate filters with + **/ +int32_t ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, uint32_t pballoc) +{ + uint32_t fdirctrl = 0; + uint32_t pbsize; + int i; + + DEBUGFUNC("ixgbe_init_fdir_perfect_82599"); + + /* + * Before enabling Flow Director, the Rx Packet Buffer size + * must be reduced. The new value is the current size minus + * flow director memory usage size. + */ + + pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc)); + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), + (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize)); + + /* + * The defaults in the HW for RX PB 1-7 are not zero and so should be + * intialized to zero for non DCB mode otherwise actual total RX PB + * would be bigger than programmed and filter space would run into + * the PB 0 region. + */ + for (i = 1; i < 8; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); + + /* Send interrupt when 64 filters are left */ + fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT; + + switch (pballoc) { + case IXGBE_FDIR_PBALLOC_64K: + /* 2k - 1 perfect filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K; + break; + case IXGBE_FDIR_PBALLOC_128K: + /* 4k - 1 perfect filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K; + break; + case IXGBE_FDIR_PBALLOC_256K: + /* 8k - 1 perfect filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K; + break; + default: + /* bad value */ + return IXGBE_ERR_CONFIG; + }; + + /* Turn perfect match filtering on */ + fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH; + fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS; + + /* Move the flexible bytes to use the ethertype - shift 6 words */ + fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT); + + /* Prime the keys for hashing */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, + htonl(IXGBE_ATR_BUCKET_HASH_KEY)); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, + htonl(IXGBE_ATR_SIGNATURE_HASH_KEY)); + + /* + * Poll init-done after we write the register. Estimated times: + * 10G: PBALLOC = 11b, timing is 60us + * 1G: PBALLOC = 11b, timing is 600us + * 100M: PBALLOC = 11b, timing is 6ms + * + * Multiple these timings by 4 if under full Rx load + * + * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for + * 1 msec per poll time. If we're at line rate and drop to 100M, then + * this might not finish in our poll time, but we can live with that + * for now. + */ + + /* Set the maximum length per hash bucket to 0xA filters */ + fdirctrl |= (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + msec_delay(1); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) + DEBUGOUT("Flow Director Perfect poll time exceeded!\n"); + + return IXGBE_SUCCESS; +} + + +/** + * ixgbe_atr_compute_hash_82599 - Compute the hashes for SW ATR + * @stream: input bitstream to compute the hash on + * @key: 32-bit hash key + **/ +uint16_t ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input, uint32_t key) +{ + /* + * The algorithm is as follows: + * Hash[15:0] = Sum { S[n] x K[n+16] }, n = 0...350 + * where Sum {A[n]}, n = 0...n is bitwise XOR of A[0], A[1]...A[n] + * and A[n] x B[n] is bitwise AND between same length strings + * + * K[n] is 16 bits, defined as: + * for n modulo 32 >= 15, K[n] = K[n % 32 : (n % 32) - 15] + * for n modulo 32 < 15, K[n] = + * K[(n % 32:0) | (31:31 - (14 - (n % 32)))] + * + * S[n] is 16 bits, defined as: + * for n >= 15, S[n] = S[n:n - 15] + * for n < 15, S[n] = S[(n:0) | (350:350 - (14 - n))] + * + * To simplify for programming, the algorithm is implemented + * in software this way: + * + * Key[31:0], Stream[335:0] + * + * tmp_key[11 * 32 - 1:0] = 11{Key[31:0] = key concatenated 11 times + * int_key[350:0] = tmp_key[351:1] + * int_stream[365:0] = Stream[14:0] | Stream[335:0] | Stream[335:321] + * + * hash[15:0] = 0; + * for (i = 0; i < 351; i++) { + * if (int_key[i]) + * hash ^= int_stream[(i + 15):i]; + * } + */ + + union { + uint64_t fill[6]; + uint32_t key[11]; + uint8_t key_stream[44]; + } tmp_key; + + uint8_t *stream = (uint8_t *)atr_input; + uint8_t int_key[44]; /* upper-most bit unused */ + uint8_t hash_str[46]; /* upper-most 2 bits unused */ + uint16_t hash_result = 0; + int i, j, k, h; + + DEBUGFUNC("ixgbe_atr_compute_hash_82599"); + + /* + * Initialize the fill member to prevent warnings + * on some compilers + */ + tmp_key.fill[0] = 0; + + /* First load the temporary key stream */ + for (i = 0; i < 6; i++) { + uint64_t fillkey = ((uint64_t)key << 32) | key; + tmp_key.fill[i] = fillkey; + } + + /* + * Set the interim key for the hashing. Bit 352 is unused, so we must + * shift and compensate when building the key. + */ + + int_key[0] = tmp_key.key_stream[0] >> 1; + for (i = 1, j = 0; i < 44; i++) { + unsigned int this_key = tmp_key.key_stream[j] << 7; + j++; + int_key[i] = (uint8_t)(this_key | (tmp_key.key_stream[j] >> 1)); + } + + /* + * Set the interim bit string for the hashing. Bits 368 and 367 are + * unused, so shift and compensate when building the string. + */ + hash_str[0] = (stream[40] & 0x7f) >> 1; + for (i = 1, j = 40; i < 46; i++) { + unsigned int this_str = stream[j] << 7; + j++; + if (j > 41) + j = 0; + hash_str[i] = (uint8_t)(this_str | (stream[j] >> 1)); + } + + /* + * Now compute the hash. i is the index into hash_str, j is into our + * key stream, k is counting the number of bits, and h interates within + * each byte. + */ + for (i = 45, j = 43, k = 0; k < 351 && i >= 2 && j >= 0; i--, j--) { + for (h = 0; h < 8 && k < 351; h++, k++) { + if (int_key[j] & (1 << h)) { + /* + * Key bit is set, XOR in the current 16-bit + * string. Example of processing: + * h = 0, + * tmp = (hash_str[i - 2] & 0 << 16) | + * (hash_str[i - 1] & 0xff << 8) | + * (hash_str[i] & 0xff >> 0) + * So tmp = hash_str[15 + k:k], since the + * i + 2 clause rolls off the 16-bit value + * h = 7, + * tmp = (hash_str[i - 2] & 0x7f << 9) | + * (hash_str[i - 1] & 0xff << 1) | + * (hash_str[i] & 0x80 >> 7) + */ + int tmp = (hash_str[i] >> h); + tmp |= (hash_str[i - 1] << (8 - h)); + tmp |= (int)(hash_str[i - 2] & ((1 << h) - 1)) + << (16 - h); + hash_result ^= (uint16_t)tmp; + } + } + } + + return hash_result; +} + +/** + * ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream + * @input: input stream to modify + * @vlan: the VLAN id to load + **/ +int32_t ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, uint16_t vlan) +{ + DEBUGFUNC("ixgbe_atr_set_vlan_id_82599"); + + input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] = vlan >> 8; + input->byte_stream[IXGBE_ATR_VLAN_OFFSET] = vlan & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address + * @input: input stream to modify + * @src_addr: the IP address to load + **/ +int32_t ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, uint32_t src_addr) +{ + DEBUGFUNC("ixgbe_atr_set_src_ipv4_82599"); + + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] = src_addr >> 24; + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] = + (src_addr >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] = + (src_addr >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET] = src_addr & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address + * @input: input stream to modify + * @dst_addr: the IP address to load + **/ +int32_t ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, uint32_t dst_addr) +{ + DEBUGFUNC("ixgbe_atr_set_dst_ipv4_82599"); + + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] = dst_addr >> 24; + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] = + (dst_addr >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] = + (dst_addr >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET] = dst_addr & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_src_ipv6_82599 - Sets the source IPv6 address + * @input: input stream to modify + * @src_addr_1: the first 4 bytes of the IP address to load + * @src_addr_2: the second 4 bytes of the IP address to load + * @src_addr_3: the third 4 bytes of the IP address to load + * @src_addr_4: the fourth 4 bytes of the IP address to load + **/ +int32_t ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input, + uint32_t src_addr_1, uint32_t src_addr_2, + uint32_t src_addr_3, uint32_t src_addr_4) +{ + DEBUGFUNC("ixgbe_atr_set_src_ipv6_82599"); + + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET] = src_addr_4 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] = + (src_addr_4 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] = + (src_addr_4 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] = src_addr_4 >> 24; + + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4] = src_addr_3 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] = + (src_addr_3 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] = + (src_addr_3 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] = src_addr_3 >> 24; + + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8] = src_addr_2 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] = + (src_addr_2 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] = + (src_addr_2 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] = src_addr_2 >> 24; + + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12] = src_addr_1 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] = + (src_addr_1 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] = + (src_addr_1 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] = src_addr_1 >> 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_dst_ipv6_82599 - Sets the destination IPv6 address + * @input: input stream to modify + * @dst_addr_1: the first 4 bytes of the IP address to load + * @dst_addr_2: the second 4 bytes of the IP address to load + * @dst_addr_3: the third 4 bytes of the IP address to load + * @dst_addr_4: the fourth 4 bytes of the IP address to load + **/ +int32_t ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input, + uint32_t dst_addr_1, uint32_t dst_addr_2, + uint32_t dst_addr_3, uint32_t dst_addr_4) +{ + DEBUGFUNC("ixgbe_atr_set_dst_ipv6_82599"); + + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET] = dst_addr_4 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] = + (dst_addr_4 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] = + (dst_addr_4 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] = dst_addr_4 >> 24; + + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4] = dst_addr_3 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] = + (dst_addr_3 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] = + (dst_addr_3 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] = dst_addr_3 >> 24; + + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8] = dst_addr_2 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] = + (dst_addr_2 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] = + (dst_addr_2 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] = dst_addr_2 >> 24; + + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12] = dst_addr_1 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] = + (dst_addr_1 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] = + (dst_addr_1 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] = dst_addr_1 >> 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_src_port_82599 - Sets the source port + * @input: input stream to modify + * @src_port: the source port to load + **/ +int32_t ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, uint16_t src_port) +{ + DEBUGFUNC("ixgbe_atr_set_src_port_82599"); + + input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1] = src_port >> 8; + input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] = src_port & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_dst_port_82599 - Sets the destination port + * @input: input stream to modify + * @dst_port: the destination port to load + **/ +int32_t ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, uint16_t dst_port) +{ + DEBUGFUNC("ixgbe_atr_set_dst_port_82599"); + + input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1] = dst_port >> 8; + input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] = dst_port & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes + * @input: input stream to modify + * @flex_bytes: the flexible bytes to load + **/ +int32_t ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, uint16_t flex_byte) +{ + DEBUGFUNC("ixgbe_atr_set_flex_byte_82599"); + + input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] = flex_byte >> 8; + input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET] = flex_byte & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_vm_pool_82599 - Sets the Virtual Machine pool + * @input: input stream to modify + * @vm_pool: the Virtual Machine pool to load + **/ +int32_t ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input, uint8_t vm_pool) +{ + DEBUGFUNC("ixgbe_atr_set_vm_pool_82599"); + + input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET] = vm_pool; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type + * @input: input stream to modify + * @l4type: the layer 4 type value to load + **/ +int32_t ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, uint8_t l4type) +{ + DEBUGFUNC("ixgbe_atr_set_l4type_82599"); + + input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET] = l4type; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream + * @input: input stream to search + * @vlan: the VLAN id to load + **/ +int32_t ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, uint16_t *vlan) +{ + DEBUGFUNC("ixgbe_atr_get_vlan_id_82599"); + + *vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET]; + *vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address + * @input: input stream to search + * @src_addr: the IP address to load + **/ +int32_t ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input, uint32_t *src_addr) +{ + DEBUGFUNC("ixgbe_atr_get_src_ipv4_82599"); + + *src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET]; + *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8; + *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] << 16; + *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address + * @input: input stream to search + * @dst_addr: the IP address to load + **/ +int32_t ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input, uint32_t *dst_addr) +{ + DEBUGFUNC("ixgbe_atr_get_dst_ipv4_82599"); + + *dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET]; + *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8; + *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] << 16; + *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address + * @input: input stream to search + * @src_addr_1: the first 4 bytes of the IP address to load + * @src_addr_2: the second 4 bytes of the IP address to load + * @src_addr_3: the third 4 bytes of the IP address to load + * @src_addr_4: the fourth 4 bytes of the IP address to load + **/ +int32_t ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input, + uint32_t *src_addr_1, uint32_t *src_addr_2, + uint32_t *src_addr_3, uint32_t *src_addr_4) +{ + DEBUGFUNC("ixgbe_atr_get_src_ipv6_82599"); + + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12]; + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8; + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] << 16; + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] << 24; + + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8]; + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] << 8; + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] << 16; + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] << 24; + + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4]; + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] << 8; + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] << 16; + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] << 24; + + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET]; + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] << 8; + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] << 16; + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_dst_ipv6_82599 - Gets the destination IPv6 address + * @input: input stream to search + * @dst_addr_1: the first 4 bytes of the IP address to load + * @dst_addr_2: the second 4 bytes of the IP address to load + * @dst_addr_3: the third 4 bytes of the IP address to load + * @dst_addr_4: the fourth 4 bytes of the IP address to load + **/ +int32_t ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input, + uint32_t *dst_addr_1, uint32_t *dst_addr_2, + uint32_t *dst_addr_3, uint32_t *dst_addr_4) +{ + DEBUGFUNC("ixgbe_atr_get_dst_ipv6_82599"); + + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12]; + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] << 8; + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] << 16; + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] << 24; + + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8]; + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] << 8; + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] << 16; + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] << 24; + + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4]; + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] << 8; + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] << 16; + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] << 24; + + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET]; + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] << 8; + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] << 16; + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_src_port_82599 - Gets the source port + * @input: input stream to modify + * @src_port: the source port to load + * + * Even though the input is given in big-endian, the FDIRPORT registers + * expect the ports to be programmed in little-endian. Hence the need to swap + * endianness when retrieving the data. This can be confusing since the + * internal hash engine expects it to be big-endian. + **/ +int32_t ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input, uint16_t *src_port) +{ + DEBUGFUNC("ixgbe_atr_get_src_port_82599"); + + *src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8; + *src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_dst_port_82599 - Gets the destination port + * @input: input stream to modify + * @dst_port: the destination port to load + * + * Even though the input is given in big-endian, the FDIRPORT registers + * expect the ports to be programmed in little-endian. Hence the need to swap + * endianness when retrieving the data. This can be confusing since the + * internal hash engine expects it to be big-endian. + **/ +int32_t ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input, uint16_t *dst_port) +{ + DEBUGFUNC("ixgbe_atr_get_dst_port_82599"); + + *dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8; + *dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes + * @input: input stream to modify + * @flex_bytes: the flexible bytes to load + **/ +int32_t ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input, uint16_t *flex_byte) +{ + DEBUGFUNC("ixgbe_atr_get_flex_byte_82599"); + + *flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET]; + *flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_vm_pool_82599 - Gets the Virtual Machine pool + * @input: input stream to modify + * @vm_pool: the Virtual Machine pool to load + **/ +int32_t ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input, uint8_t *vm_pool) +{ + DEBUGFUNC("ixgbe_atr_get_vm_pool_82599"); + + *vm_pool = input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type + * @input: input stream to modify + * @l4type: the layer 4 type value to load + **/ +int32_t ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input, uint8_t *l4type) +{ + DEBUGFUNC("ixgbe_atr_get_l4type__82599"); + + *l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter + * @hw: pointer to hardware structure + * @stream: input bitstream + * @queue: queue index to direct traffic to + **/ +int32_t ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + struct ixgbe_atr_input *input, + uint8_t queue) +{ + uint64_t fdirhashcmd; + uint64_t fdircmd; + uint32_t fdirhash; + uint16_t bucket_hash, sig_hash; + uint8_t l4type; + + DEBUGFUNC("ixgbe_fdir_add_signature_filter_82599"); + + bucket_hash = ixgbe_atr_compute_hash_82599(input, + IXGBE_ATR_BUCKET_HASH_KEY); + + /* bucket_hash is only 15 bits */ + bucket_hash &= IXGBE_ATR_HASH_MASK; + + sig_hash = ixgbe_atr_compute_hash_82599(input, + IXGBE_ATR_SIGNATURE_HASH_KEY); + + /* Get the l4type in order to program FDIRCMD properly */ + /* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */ + ixgbe_atr_get_l4type_82599(input, &l4type); + + /* + * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits + * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. + */ + fdirhash = sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash; + + fdircmd = (IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN); + + switch (l4type & IXGBE_ATR_L4TYPE_MASK) { + case IXGBE_ATR_L4TYPE_TCP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP; + break; + case IXGBE_ATR_L4TYPE_UDP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP; + break; + case IXGBE_ATR_L4TYPE_SCTP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP; + break; + default: + DEBUGOUT(" Error on l4type input\n"); + return IXGBE_ERR_CONFIG; + } + + if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) + fdircmd |= IXGBE_FDIRCMD_IPV6; + + fdircmd |= ((uint64_t)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT); + fdirhashcmd = ((fdircmd << 32) | fdirhash); + + DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, fdirhash & 0x7FFF7FFF); + IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter + * @hw: pointer to hardware structure + * @input: input bitstream + * @queue: queue index to direct traffic to + * + * Note that the caller to this function must lock before calling, since the + * hardware writes must be protected from one another. + **/ +int32_t ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, + struct ixgbe_atr_input *input, + uint16_t soft_id, + uint8_t queue) +{ + uint32_t fdircmd = 0; + uint32_t fdirhash; + uint32_t src_ipv4, dst_ipv4; + uint32_t src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4; + uint16_t src_port, dst_port, vlan_id, flex_bytes; + uint16_t bucket_hash; + uint8_t l4type; + + DEBUGFUNC("ixgbe_fdir_add_perfect_filter_82599"); + + /* Get our input values */ + ixgbe_atr_get_l4type_82599(input, &l4type); + + /* + * Check l4type formatting, and bail out before we touch the hardware + * if there's a configuration issue + */ + switch (l4type & IXGBE_ATR_L4TYPE_MASK) { + case IXGBE_ATR_L4TYPE_TCP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP; + break; + case IXGBE_ATR_L4TYPE_UDP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP; + break; + case IXGBE_ATR_L4TYPE_SCTP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP; + break; + default: + DEBUGOUT(" Error on l4type input\n"); + return IXGBE_ERR_CONFIG; + } + + bucket_hash = ixgbe_atr_compute_hash_82599(input, + IXGBE_ATR_BUCKET_HASH_KEY); + + /* bucket_hash is only 15 bits */ + bucket_hash &= IXGBE_ATR_HASH_MASK; + + ixgbe_atr_get_vlan_id_82599(input, &vlan_id); + ixgbe_atr_get_src_port_82599(input, &src_port); + ixgbe_atr_get_dst_port_82599(input, &dst_port); + ixgbe_atr_get_flex_byte_82599(input, &flex_bytes); + + fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash; + + /* Now figure out if we're IPv4 or IPv6 */ + if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) { + /* IPv6 */ + ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2, + &src_ipv6_3, &src_ipv6_4); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3); + /* The last 4 bytes is the same register as IPv4 */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4); + + fdircmd |= IXGBE_FDIRCMD_IPV6; + fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH; + } else { + /* IPv4 */ + ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4); + IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4); + + } + + ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4); + IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id | + (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT))); + IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port | + (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT))); + + fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW; + fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE; + fdircmd |= IXGBE_FDIRCMD_LAST; + fdircmd |= IXGBE_FDIRCMD_QUEUE_EN; + fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Omer analog register specified. + **/ +int32_t ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, uint32_t reg, uint8_t *val) +{ + uint32_t core_ctl; + + DEBUGFUNC("ixgbe_read_analog_reg8_82599"); + + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | + (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + usec_delay(10); + core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); + *val = (uint8_t)core_ctl; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Omer analog register specified. + **/ +int32_t ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, uint32_t reg, uint8_t val) +{ + uint32_t core_ctl; + + DEBUGFUNC("ixgbe_write_analog_reg8_82599"); + + core_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); + IXGBE_WRITE_FLUSH(hw); + usec_delay(10); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_start_hw_rev_1_82599 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Then performs revision-specific operations: + * Clears the rate limiter registers. + **/ +int32_t ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw) +{ + uint32_t i; + uint32_t regval; + int32_t ret_val = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_start_hw_rev_1__82599"); + + ret_val = ixgbe_start_hw_generic(hw); + + /* Clear the rate limiters */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); + } + IXGBE_WRITE_FLUSH(hw); + + /* Disable relaxed ordering */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); + regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); + } + + for (i = 0; i < hw->mac.max_rx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + /* We need to run link autotry after the driver loads */ + hw->mac.autotry_restart = TRUE; + + if (ret_val == IXGBE_SUCCESS) + ret_val = ixgbe_verify_fw_version_82599(hw); + return ret_val; +} + +/** + * ixgbe_identify_phy_82599 - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + * If PHY already detected, maintains current PHY type in hw struct, + * otherwise executes the PHY detection routine. + **/ +int32_t ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +{ + int32_t status = IXGBE_ERR_PHY_ADDR_INVALID; + + DEBUGFUNC("ixgbe_identify_phy_82599"); + + /* Detect PHY if not unknown - returns success if already detected. */ + status = ixgbe_identify_phy_generic(hw); + if (status != IXGBE_SUCCESS) + status = ixgbe_identify_sfp_module_generic(hw); + /* Set PHY type none if no PHY detected */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.type = ixgbe_phy_none; + status = IXGBE_SUCCESS; + } + + /* Return error if SFP module has been detected but is not supported */ + if (hw->phy.type == ixgbe_phy_sfp_unsupported) + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +uint32_t ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) +{ + uint32_t physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + uint32_t autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + uint32_t autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + uint32_t pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + uint32_t pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + uint32_t pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + uint16_t ext_ability = 0; + uint8_t comp_codes_10g = 0; + + DEBUGFUNC("ixgbe_get_support_physical_layer_82599"); + + hw->phy.ops.identify(hw); + + if (hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq || + hw->phy.type == ixgbe_phy_cu_unknown) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_1000BASE_BX; + goto out; + } else + /* SFI mode so read SFP module */ + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; + goto out; + break; + case IXGBE_AUTOC_LMS_10G_SERIAL: + if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + if (autoc & IXGBE_AUTOC_KR_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + break; + default: + goto out; + break; + } + +sfp_check: + /* SFP check must be done last since DA modules are sometimes used to + * test KR mode - we need to id KR mode correctly before SFP module. + * Call identify_sfp because the pluggable module may have changed */ + hw->phy.ops.identify_sfp(hw); + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + goto out; + + switch (hw->phy.type) { + case ixgbe_phy_tw_tyco: + case ixgbe_phy_tw_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit for 82599 + **/ +int32_t ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, uint32_t regval) +{ +#define IXGBE_MAX_SECRX_POLL 30 + int i; + int secrxreg; + + DEBUGFUNC("ixgbe_enable_rx_dma_82599"); + + /* + * Workaround for 82599 silicon errata when enabling the Rx datapath. + * If traffic is incoming before we enable the Rx unit, it could hang + * the Rx DMA unit. Therefore, make sure the security engine is + * completely disabled prior to enabling the Rx unit. + */ + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg |= IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); + if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) + break; + else + /* Use interrupt-safe sleep just in case */ + usec_delay(10); + } + + /* For informational purposes only */ + if (i >= IXGBE_MAX_SECRX_POLL) + DEBUGOUT("Rx unit being enabled before security " + "path fully disabled. Continuing with init.\n"); + + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + IXGBE_WRITE_FLUSH(hw); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_get_device_caps_82599 - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word with the extra device capabilities + * + * This function will read the EEPROM location for the device capabilities, + * and return the word through device_caps. + **/ +int32_t ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, uint16_t *device_caps) +{ + DEBUGFUNC("ixgbe_get_device_caps_82599"); + + hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_verify_fw_version_82599 - verify fw version for 82599 + * @hw: pointer to hardware structure + * + * Verifies that installed the firmware version is 0.6 or higher + * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. + * + * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or + * if the FW version is not supported. + **/ +int32_t ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) +{ + int32_t status = IXGBE_ERR_EEPROM_VERSION; + uint16_t fw_offset, fw_ptp_cfg_offset; + uint16_t fw_version = 0; + + DEBUGFUNC("ixgbe_verify_fw_version_82599"); + + /* firmware check is only necessary for SFI devices */ + if (hw->phy.media_type != ixgbe_media_type_fiber) { + status = IXGBE_SUCCESS; + goto fw_version_out; + } + + /* get the offset to the Firmware Module block */ + hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((fw_offset == 0) || (fw_offset == 0xFFFF)) + goto fw_version_out; + + /* get the offset to the Pass Through Patch Configuration block */ + hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), + &fw_ptp_cfg_offset); + + if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) + goto fw_version_out; + + /* get the firmware version */ + hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + + IXGBE_FW_PATCH_VERSION_4), + &fw_version); + + if (fw_version > 0x5) + status = IXGBE_SUCCESS; + +fw_version_out: + return status; +} |