diff options
Diffstat (limited to 'distrib/notes/armv7/prep')
| -rw-r--r-- | distrib/notes/armv7/prep | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/distrib/notes/armv7/prep b/distrib/notes/armv7/prep index 509e891d91c..2e391f5fb67 100644 --- a/distrib/notes/armv7/prep +++ b/distrib/notes/armv7/prep @@ -1,12 +1,18 @@ -dnl $OpenBSD: prep,v 1.19 2020/05/17 17:04:28 deraadt Exp $ +dnl $OpenBSD: prep,v 1.20 2022/08/29 17:05:38 fcambus Exp $ Please be aware that OpenBSD support for this platform is far from complete. To perform an installation you must be able to interact with the serial -console of the machine. USB OTG ports such as the one found on the -BeagleBone will not function as a console. You need to be able to -interact with the firmware on the console. Often this requires a 3.3V -TTL level adapter connected to pins or a header on the board. +console of the machine in most cases. USB OTG ports such as the one +found on the BeagleBone will not function as a console. You need to be +able to interact with the firmware on the console. Often this requires +a 3.3V TTL level adapter connected to pins or a header on the board. + +On systems supporting the simplefb(4) driver, such as the Cubieboard2, +it is possible to install the system using the framebuffer console. +You will need to enter the following at the ``boot>'' prompt: + + boot> set tty fb0 Firmware which provides an EFI interface with a Device Tree Blob (DTB) file is required to boot. In most cases this is provided by images of |