summaryrefslogtreecommitdiff
path: root/distrib/sparc/install.sh
diff options
context:
space:
mode:
Diffstat (limited to 'distrib/sparc/install.sh')
-rw-r--r--distrib/sparc/install.sh284
1 files changed, 187 insertions, 97 deletions
diff --git a/distrib/sparc/install.sh b/distrib/sparc/install.sh
index 829e18453b9..e6577411343 100644
--- a/distrib/sparc/install.sh
+++ b/distrib/sparc/install.sh
@@ -1,5 +1,5 @@
#!/bin/sh
-# $NetBSD: install.sh,v 1.2.2.1 1995/11/01 21:26:21 pk Exp $
+# $NetBSD: install.sh,v 1.2.2.2 1995/11/16 22:30:55 pk Exp $
#
# Copyright (c) 1995 Jason R. Thorpe.
# All rights reserved.
@@ -75,7 +75,7 @@ twiddle()
sleep 1; echo -n "-";
sleep 1; echo -n "\\";
sleep 1; echo -n "|";
- done > /dev/tty & echo $!
+ done > /dev/tty & echo $!
}
set_terminal() {
@@ -90,17 +90,17 @@ set_terminal() {
#
md_get_diskdevs() {
# return available disk devices
- dmesg | egrep "(^sd[0-9]:|^x[dy][0-9]:)" | cut -d" " -f1 | sort | uniq
+ dmesg | egrep "(^sd[0-9]|^x[dy][0-9])" | cut -d" " -f1 | sort -u
}
md_get_cddevs() {
# return available CDROM devices
- dmesg | grep "^sd" | grep "rev" | cut -d" " -f1
+ dmesg | grep "^cd[0-9]" | cut -d" " -f1 | sort -u
}
md_get_ifdevs() {
# return available network devices
- dmesg | egrep "(^le[0-9]|^ie[0-9])" | cut -d" " -f1
+ dmesg | egrep "(^le[0-9]|^ie[0-9])" | cut -d" " -f1 | sort -u
}
md_installboot() {
@@ -221,71 +221,91 @@ addifconfig() {
configurenetwork() {
+ local _ifsdone
+ local _ifs
+
+ _IFS=`md_get_ifdevs`
+ _ifsdone=""
+ resp="" # force at least one iteration
+ while [ "X${resp}" != X"done" ]; do
cat << \__configurenetwork_1
-You may configure the following network interfaces:
+You may configure the following network interfaces (the interfaces
+marked with [X] have been succesfully configured):
__configurenetwork_1
- _IFS=`md_get_ifdevs`
- echo $_IFS
- echo ""
- echo -n "Configure which interface? [done] "
- getresp "done"
- case "$resp" in
+ for _ifs in $_IFS; do
+ if isin $_ifs $_ifsdone ; then
+ echo -n "[X] "
+ else
+ echo -n " "
+ fi
+ echo $_ifs
+ done
+ echo ""
+ echo -n "Configure which interface? [done] "
+ getresp "done"
+ case "$resp" in
"done")
;;
-
*)
- if isin $resp $_IFS ; then
- _interface_name=$resp
-
- # remove from list
- _IFS=`rmel $resp "$_IFS"`
-
- # Get IP address
- resp="" # force one iteration
- while [ "X${resp}" = X"" ]; do
- echo -n "IP address? "
- getresp ""
- _interface_ip=$resp
- done
-
- # Get symbolic name
- resp="" # force one iteration
- while [ "X${resp}" = X"" ]; do
- echo -n "Symbolic name? "
- getresp ""
- _interface_symname=$resp
- done
-
- # Get netmask
- resp="" # force one iteration
- while [ "X${resp}" = X"" ]; do
- echo -n "Netmask? "
- getresp ""
- _interface_mask=$resp
- done
-
- # Configure the interface. If it
- # succeeds, add it to the permanent
- # network configuration info.
- ifconfig ${_interface_name} down
- if ifconfig ${_interface_name} inet \
- ${_interface_ip} \
- netmask ${_interface_mask} up ; then
- addifconfig \
- ${_interface_name} \
- ${_interface_symname} \
- ${_interface_ip} \
- ${_interface_mask}
+ _ifs=$resp
+ if isin $_ifs $_IFS ; then
+ if configure_ifs $_ifs ; then
+ _ifsdone="$_ifs $_ifsdone"
fi
else
- echo ""
- echo "The interface $resp does not exist."
+ echo "Invalid response: \"$resp\" is not in list"
fi
;;
- esac
+ esac
+ done
+}
+
+configure_ifs() {
+
+ _interface_name=$1
+
+ # Get IP address
+ resp="" # force one iteration
+ while [ "X${resp}" = X"" ]; do
+ echo -n "IP address? "
+ getresp ""
+ _interface_ip=$resp
+ done
+
+ # Get symbolic name
+ resp="" # force one iteration
+ while [ "X${resp}" = X"" ]; do
+ echo -n "Symbolic (host) name? "
+ getresp ""
+ _interface_symname=$resp
+ done
+
+ # Get netmask
+ resp="" # force one iteration
+ while [ "X${resp}" = X"" ]; do
+ echo -n "Netmask? "
+ getresp ""
+ _interface_mask=$resp
+ done
+
+ # Configure the interface. If it
+ # succeeds, add it to the permanent
+ # network configuration info.
+ ifconfig ${_interface_name} down
+ if ifconfig ${_interface_name} inet \
+ ${_interface_ip} \
+ netmask ${_interface_mask} up ; then
+ addifconfig \
+ ${_interface_name} \
+ ${_interface_symname} \
+ ${_interface_ip} \
+ ${_interface_mask}
+ return 0
+ fi
+ return 1
}
install_ftp() {
@@ -370,25 +390,61 @@ __install_ftp_2
install_common_nfs_cdrom() {
# $1 - directory containing file
-
- # Get the name of the file.
- resp="" # force one iteration
- while [ "X${resp}" = X"" ]; do
- echo -n "File name? "
- getresp ""
- done
- _common_filename="/mnt2/$1/$resp"
-
- # Ensure file exists
- if [ ! -f $_common_filename ]; then
- echo "File $_common_filename does not exist. Check to make"
- echo "sure you entered the information properly."
+ local _filename
+ local _setsdone
+ local _prev
+ local _f
+
+ _sets=`(cd /mnt2/$1; ls *.tar.gz)`
+ if [ -z "$_sets" ]; then
+ echo "There are no NetBSD install sets available in \"$1\""
return
fi
- # Extract file
- cat $_common_filename | (cd /mnt; tar -zxvpf -)
- echo "Extraction complete."
+ _setsdone=""
+ while : ; do
+ echo "The following sets are available for extraction:"
+ echo "(marked sets have already been extracted)"
+ echo ""
+
+ _prev=""
+ for _f in $_sets ; do
+ if isin $_f $_setsdone; then
+ echo -n "[X] "
+ else
+ echo -n " "
+ if [ -z "$_prev" ]; then _prev=$_f; fi
+ fi
+ echo $_f
+ done
+ echo ""
+
+ # Get the name of the file.
+ if [ "X$_prev" = "X" ]; then resp=n; else resp=y; fi
+ echo -n "Continue extraction [$resp]?"
+ getresp "$resp"
+ if [ "$resp" = "n" ]; then
+ break
+ fi
+
+ echo -n "File name [$_prev]? "
+ getresp "$_prev"
+ _f=$resp
+ _filename="/mnt2/$1/$_f"
+
+ # Ensure file exists
+ if [ ! -f $_filename ]; then
+ echo "File $_filename does not exist. Check to make"
+ echo "sure you entered the information properly."
+ continue
+ fi
+
+ # Extract file
+ cat $_filename | (cd /mnt; tar -zxvpf -)
+ echo "Extraction complete."
+ _setsdone="$_f $_setsdone"
+
+ done
}
install_cdrom() {
@@ -464,6 +520,7 @@ __install_cdrom_2
done
# Mount the CD-ROM
+ mkdir /mnt2 > /dev/null 2>&1
if ! mount -t ${_cdrom_filesystem} -o ro \
/dev/${_cdrom_drive}${_cdrom_partition} /mnt2 ; then
echo "Cannot mount CD-ROM drive. Aborting."
@@ -615,7 +672,7 @@ __install_tape_2
2)
(
cd /mnt
- tar -zxvpf $TAPE
+ dd if=$TAPE | tar -xvpf -
)
;;
@@ -638,16 +695,16 @@ timezones can be selected by entering a token like "MET" or "GMT-6".
Other zones are grouped by continent, with detailed zone information
separated by a slash ("/"), e.g. "US/Pacific".
-To get a listing of what's available in /usr/share/timezone, enter "?"
-at the first prompt below.
+To get a listing of what's available in /usr/share/zoneinfo, enter "?"
+at the prompts below.
__get_timezone_1
if [ X$TZ = X ]; then
TZ=`ls -l /etc/timezone 2>/dev/null | awk '{print $NF}' |
- sed -e 's?/usr/share/timezone/??'`
+ sed -e 's?/usr/share/zoneinfo/??'`
fi
while :; do
- echo -n "What timezone are you in [$TZ]? "
+ echo -n "What timezone are you in [\`?' for list] [$TZ]? "
getresp "$TZ"
case "$resp" in
"")
@@ -660,16 +717,23 @@ __get_timezone_1
;;
*)
_a=$resp
- if [ -d /usr/share/zoneinfo/$_a ]; then
+ while [ -d /usr/share/zoneinfo/$_a ]; do
echo -n "There are several timezones available"
- echo " within '$_a'"
- echo -n "Select a sub-timezone: "
+ echo " within zone '$_a'"
+ echo -n "Select a sub-timezone [\`?' for list]: "
getresp ""
- _a=${_a}/${resp}
- fi
+ case "$resp" in
+ "?") ls /usr/share/zoneinfo/$_a ;;
+ *) _a=${_a}/${resp}
+ if [ -f /usr/share/zoneinfo/$_a ]; then
+ break;
+ fi
+ ;;
+ esac
+ done
if [ -f /usr/share/zoneinfo/$_a ]; then
TZ="$_a"
- echo "You have selected timezone "$_a".
+ echo "You have selected timezone \"$_a\"".
break 2
fi
echo "'/usr/share/zoneinfo/$_a' is not a valid timezone on this system."
@@ -773,6 +837,30 @@ echo -n "Do you wish to edit the root disklabel? [y] "
getresp "y"
case "$resp" in
y*|Y*)
+cat << \__disklabel_notice_2
+Here is an example of what the partition information will look like once
+you have entered the disklabel editor. Disk partition sizes and offsets
+are in sector (most likely 512 bytes) units. Make sure these size/offset
+pairs are on cylinder boundaries (the number of sector per cylinder is
+given in the `sectors/cylinder' entry, which is not shown here).
+
+Do not change any parameters except the partition layout and the label name.
+It's probably also wisest not to touch the `8 partitions:' line, even
+in case you have defined less than eight partitions.
+
+[Example]
+8 partitions:
+# size offset fstype [fsize bsize cpg]
+ a: 50176 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 111)
+ b: 64512 50176 swap # (Cyl. 112 - 255)
+ c: 640192 0 unknown # (Cyl. 0 - 1428)
+ d: 525504 114688 4.2BSD 1024 8192 16 # (Cyl. 256 - 1428)
+[End of example]
+
+__disklabel_notice_2
+ echo -n "Hit <enter> to enter the disklabel editor: "
+ getresp ""
+
disklabel -W ${ROOTDISK}
disklabel -e ${ROOTDISK}
;;
@@ -781,11 +869,11 @@ case "$resp" in
;;
esac
-cat << \__disklabel_notice_2
+cat << \__disklabel_notice_3
You will now be given the opportunity to place disklabels on any additional
disks on your system.
-__disklabel_notice_2
+__disklabel_notice_3
resp="X" # force at least one iteration
while [ "X$resp" != X"done" ]; do
@@ -797,9 +885,10 @@ done
# XXX ASSUMES THAT THE USER DOESN'T PROVIDE BOGUS INPUT.
cat << \__get_filesystems_1
-You will now have the opportunity to enter filesystem information.
-You will be prompted for device name and mount point (full path,
-including the prepending '/' character).
+You will now have the opportunity to specify mount points for some or
+all of the partitions you have on your disk(s).
+You will be prompted for device name (for example `/dev/sd0d') and
+mount point (full path, e.g. `/usr').
Note that these do not have to be in any particular order. You will
be given the opportunity to edit the resulting 'fstab' file before
@@ -903,10 +992,7 @@ case "$resp" in
done
FQDN=$resp
- resp="" # force at least one iteration
- while [ "X${resp}" != X"done" ]; do
- configurenetwork
- done
+ configurenetwork
echo -n "Enter IP address of default route: [none] "
getresp "none"
@@ -1064,7 +1150,10 @@ if [ -f $RELDIR/base.tar.gz ]; then
case "$resp" in
y*|Y*)
for _f in $ALLSETS; do
- echo -n "Install $_f ? [y]"
+ if [ ! -f $RELDIR/${_f}.tar.gz ]; then
+ continue;
+ fi
+ echo -n "Install set \"$_f\" ? [y]"
getresp "y"
case "$resp" in
y*|Y*)
@@ -1073,6 +1162,7 @@ if [ -f $RELDIR/base.tar.gz ]; then
_yup=X
;;
*)
+ continue;
;;
esac
echo "Extraction complete."
@@ -1117,7 +1207,7 @@ while [ "X${resp}" = X"" ]; do
# Give the user the opportunity to extract more sets. They don't
# necessarily have to come from the same media.
echo ""
- echo -n "Extract more sets? [n] "
+ echo -n "Extract more sets (from other media)? [n] "
getresp "n"
case "$resp" in
y*|Y*)
@@ -1152,7 +1242,7 @@ done
echo "done."
echo "Copying kernel..."
- cp /netbsd /mnt/netbsd
+ cp -p /netbsd /mnt/netbsd
md_installboot ${ROOTDISK}
)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 20:50:49 +0000