diff options
Diffstat (limited to 'gnu/egcs/gcc/md.texi')
| -rw-r--r-- | gnu/egcs/gcc/md.texi | 4258 |
1 files changed, 4258 insertions, 0 deletions
diff --git a/gnu/egcs/gcc/md.texi b/gnu/egcs/gcc/md.texi new file mode 100644 index 00000000000..907df37080e --- /dev/null +++ b/gnu/egcs/gcc/md.texi @@ -0,0 +1,4258 @@ +@c Copyright (C) 1988, 89, 92, 93, 94, 96, 1998 Free Software Foundation, Inc. +@c This is part of the GCC manual. +@c For copying conditions, see the file gcc.texi. + +@ifset INTERNALS +@node Machine Desc +@chapter Machine Descriptions +@cindex machine descriptions + +A machine description has two parts: a file of instruction patterns +(@file{.md} file) and a C header file of macro definitions. + +The @file{.md} file for a target machine contains a pattern for each +instruction that the target machine supports (or at least each instruction +that is worth telling the compiler about). It may also contain comments. +A semicolon causes the rest of the line to be a comment, unless the semicolon +is inside a quoted string. + +See the next chapter for information on the C header file. + +@menu +* Patterns:: How to write instruction patterns. +* Example:: An explained example of a @code{define_insn} pattern. +* RTL Template:: The RTL template defines what insns match a pattern. +* Output Template:: The output template says how to make assembler code + from such an insn. +* Output Statement:: For more generality, write C code to output + the assembler code. +* Constraints:: When not all operands are general operands. +* Standard Names:: Names mark patterns to use for code generation. +* Pattern Ordering:: When the order of patterns makes a difference. +* Dependent Patterns:: Having one pattern may make you need another. +* Jump Patterns:: Special considerations for patterns for jump insns. +* Insn Canonicalizations::Canonicalization of Instructions +* Peephole Definitions::Defining machine-specific peephole optimizations. +* Expander Definitions::Generating a sequence of several RTL insns + for a standard operation. +* Insn Splitting:: Splitting Instructions into Multiple Instructions +* Insn Attributes:: Specifying the value of attributes for generated insns. +@end menu + +@node Patterns +@section Everything about Instruction Patterns +@cindex patterns +@cindex instruction patterns + +@findex define_insn +Each instruction pattern contains an incomplete RTL expression, with pieces +to be filled in later, operand constraints that restrict how the pieces can +be filled in, and an output pattern or C code to generate the assembler +output, all wrapped up in a @code{define_insn} expression. + +A @code{define_insn} is an RTL expression containing four or five operands: + +@enumerate +@item +An optional name. The presence of a name indicate that this instruction +pattern can perform a certain standard job for the RTL-generation +pass of the compiler. This pass knows certain names and will use +the instruction patterns with those names, if the names are defined +in the machine description. + +The absence of a name is indicated by writing an empty string +where the name should go. Nameless instruction patterns are never +used for generating RTL code, but they may permit several simpler insns +to be combined later on. + +Names that are not thus known and used in RTL-generation have no +effect; they are equivalent to no name at all. + +@item +The @dfn{RTL template} (@pxref{RTL Template}) is a vector of incomplete +RTL expressions which show what the instruction should look like. It is +incomplete because it may contain @code{match_operand}, +@code{match_operator}, and @code{match_dup} expressions that stand for +operands of the instruction. + +If the vector has only one element, that element is the template for the +instruction pattern. If the vector has multiple elements, then the +instruction pattern is a @code{parallel} expression containing the +elements described. + +@item +@cindex pattern conditions +@cindex conditions, in patterns +A condition. This is a string which contains a C expression that is +the final test to decide whether an insn body matches this pattern. + +@cindex named patterns and conditions +For a named pattern, the condition (if present) may not depend on +the data in the insn being matched, but only the target-machine-type +flags. The compiler needs to test these conditions during +initialization in order to learn exactly which named instructions are +available in a particular run. + +@findex operands +For nameless patterns, the condition is applied only when matching an +individual insn, and only after the insn has matched the pattern's +recognition template. The insn's operands may be found in the vector +@code{operands}. + +@item +The @dfn{output template}: a string that says how to output matching +insns as assembler code. @samp{%} in this string specifies where +to substitute the value of an operand. @xref{Output Template}. + +When simple substitution isn't general enough, you can specify a piece +of C code to compute the output. @xref{Output Statement}. + +@item +Optionally, a vector containing the values of attributes for insns matching +this pattern. @xref{Insn Attributes}. +@end enumerate + +@node Example +@section Example of @code{define_insn} +@cindex @code{define_insn} example + +Here is an actual example of an instruction pattern, for the 68000/68020. + +@example +(define_insn "tstsi" + [(set (cc0) + (match_operand:SI 0 "general_operand" "rm"))] + "" + "* +@{ if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) + return \"tstl %0\"; + return \"cmpl #0,%0\"; @}") +@end example + +This is an instruction that sets the condition codes based on the value of +a general operand. It has no condition, so any insn whose RTL description +has the form shown may be handled according to this pattern. The name +@samp{tstsi} means ``test a @code{SImode} value'' and tells the RTL generation +pass that, when it is necessary to test such a value, an insn to do so +can be constructed using this pattern. + +The output control string is a piece of C code which chooses which +output template to return based on the kind of operand and the specific +type of CPU for which code is being generated. + +@samp{"rm"} is an operand constraint. Its meaning is explained below. + +@node RTL Template +@section RTL Template +@cindex RTL insn template +@cindex generating insns +@cindex insns, generating +@cindex recognizing insns +@cindex insns, recognizing + +The RTL template is used to define which insns match the particular pattern +and how to find their operands. For named patterns, the RTL template also +says how to construct an insn from specified operands. + +Construction involves substituting specified operands into a copy of the +template. Matching involves determining the values that serve as the +operands in the insn being matched. Both of these activities are +controlled by special expression types that direct matching and +substitution of the operands. + +@table @code +@findex match_operand +@item (match_operand:@var{m} @var{n} @var{predicate} @var{constraint}) +This expression is a placeholder for operand number @var{n} of +the insn. When constructing an insn, operand number @var{n} +will be substituted at this point. When matching an insn, whatever +appears at this position in the insn will be taken as operand +number @var{n}; but it must satisfy @var{predicate} or this instruction +pattern will not match at all. + +Operand numbers must be chosen consecutively counting from zero in +each instruction pattern. There may be only one @code{match_operand} +expression in the pattern for each operand number. Usually operands +are numbered in the order of appearance in @code{match_operand} +expressions. In the case of a @code{define_expand}, any operand numbers +used only in @code{match_dup} expressions have higher values than all +other operand numbers. + +@var{predicate} is a string that is the name of a C function that accepts two +arguments, an expression and a machine mode. During matching, the +function will be called with the putative operand as the expression and +@var{m} as the mode argument (if @var{m} is not specified, +@code{VOIDmode} will be used, which normally causes @var{predicate} to accept +any mode). If it returns zero, this instruction pattern fails to match. +@var{predicate} may be an empty string; then it means no test is to be done +on the operand, so anything which occurs in this position is valid. + +Most of the time, @var{predicate} will reject modes other than @var{m}---but +not always. For example, the predicate @code{address_operand} uses +@var{m} as the mode of memory ref that the address should be valid for. +Many predicates accept @code{const_int} nodes even though their mode is +@code{VOIDmode}. + +@var{constraint} controls reloading and the choice of the best register +class to use for a value, as explained later (@pxref{Constraints}). + +People are often unclear on the difference between the constraint and the +predicate. The predicate helps decide whether a given insn matches the +pattern. The constraint plays no role in this decision; instead, it +controls various decisions in the case of an insn which does match. + +@findex general_operand +On CISC machines, the most common @var{predicate} is +@code{"general_operand"}. This function checks that the putative +operand is either a constant, a register or a memory reference, and that +it is valid for mode @var{m}. + +@findex register_operand +For an operand that must be a register, @var{predicate} should be +@code{"register_operand"}. Using @code{"general_operand"} would be +valid, since the reload pass would copy any non-register operands +through registers, but this would make GNU CC do extra work, it would +prevent invariant operands (such as constant) from being removed from +loops, and it would prevent the register allocator from doing the best +possible job. On RISC machines, it is usually most efficient to allow +@var{predicate} to accept only objects that the constraints allow. + +@findex immediate_operand +For an operand that must be a constant, you must be sure to either use +@code{"immediate_operand"} for @var{predicate}, or make the instruction +pattern's extra condition require a constant, or both. You cannot +expect the constraints to do this work! If the constraints allow only +constants, but the predicate allows something else, the compiler will +crash when that case arises. + +@findex match_scratch +@item (match_scratch:@var{m} @var{n} @var{constraint}) +This expression is also a placeholder for operand number @var{n} +and indicates that operand must be a @code{scratch} or @code{reg} +expression. + +When matching patterns, this is equivalent to + +@smallexample +(match_operand:@var{m} @var{n} "scratch_operand" @var{pred}) +@end smallexample + +but, when generating RTL, it produces a (@code{scratch}:@var{m}) +expression. + +If the last few expressions in a @code{parallel} are @code{clobber} +expressions whose operands are either a hard register or +@code{match_scratch}, the combiner can add or delete them when +necessary. @xref{Side Effects}. + +@findex match_dup +@item (match_dup @var{n}) +This expression is also a placeholder for operand number @var{n}. +It is used when the operand needs to appear more than once in the +insn. + +In construction, @code{match_dup} acts just like @code{match_operand}: +the operand is substituted into the insn being constructed. But in +matching, @code{match_dup} behaves differently. It assumes that operand +number @var{n} has already been determined by a @code{match_operand} +appearing earlier in the recognition template, and it matches only an +identical-looking expression. + +@findex match_operator +@item (match_operator:@var{m} @var{n} @var{predicate} [@var{operands}@dots{}]) +This pattern is a kind of placeholder for a variable RTL expression +code. + +When constructing an insn, it stands for an RTL expression whose +expression code is taken from that of operand @var{n}, and whose +operands are constructed from the patterns @var{operands}. + +When matching an expression, it matches an expression if the function +@var{predicate} returns nonzero on that expression @emph{and} the +patterns @var{operands} match the operands of the expression. + +Suppose that the function @code{commutative_operator} is defined as +follows, to match any expression whose operator is one of the +commutative arithmetic operators of RTL and whose mode is @var{mode}: + +@smallexample +int +commutative_operator (x, mode) + rtx x; + enum machine_mode mode; +@{ + enum rtx_code code = GET_CODE (x); + if (GET_MODE (x) != mode) + return 0; + return (GET_RTX_CLASS (code) == 'c' + || code == EQ || code == NE); +@} +@end smallexample + +Then the following pattern will match any RTL expression consisting +of a commutative operator applied to two general operands: + +@smallexample +(match_operator:SI 3 "commutative_operator" + [(match_operand:SI 1 "general_operand" "g") + (match_operand:SI 2 "general_operand" "g")]) +@end smallexample + +Here the vector @code{[@var{operands}@dots{}]} contains two patterns +because the expressions to be matched all contain two operands. + +When this pattern does match, the two operands of the commutative +operator are recorded as operands 1 and 2 of the insn. (This is done +by the two instances of @code{match_operand}.) Operand 3 of the insn +will be the entire commutative expression: use @code{GET_CODE +(operands[3])} to see which commutative operator was used. + +The machine mode @var{m} of @code{match_operator} works like that of +@code{match_operand}: it is passed as the second argument to the +predicate function, and that function is solely responsible for +deciding whether the expression to be matched ``has'' that mode. + +When constructing an insn, argument 3 of the gen-function will specify +the operation (i.e. the expression code) for the expression to be +made. It should be an RTL expression, whose expression code is copied +into a new expression whose operands are arguments 1 and 2 of the +gen-function. The subexpressions of argument 3 are not used; +only its expression code matters. + +When @code{match_operator} is used in a pattern for matching an insn, +it usually best if the operand number of the @code{match_operator} +is higher than that of the actual operands of the insn. This improves +register allocation because the register allocator often looks at +operands 1 and 2 of insns to see if it can do register tying. + +There is no way to specify constraints in @code{match_operator}. The +operand of the insn which corresponds to the @code{match_operator} +never has any constraints because it is never reloaded as a whole. +However, if parts of its @var{operands} are matched by +@code{match_operand} patterns, those parts may have constraints of +their own. + +@findex match_op_dup +@item (match_op_dup:@var{m} @var{n}[@var{operands}@dots{}]) +Like @code{match_dup}, except that it applies to operators instead of +operands. When constructing an insn, operand number @var{n} will be +substituted at this point. But in matching, @code{match_op_dup} behaves +differently. It assumes that operand number @var{n} has already been +determined by a @code{match_operator} appearing earlier in the +recognition template, and it matches only an identical-looking +expression. + +@findex match_parallel +@item (match_parallel @var{n} @var{predicate} [@var{subpat}@dots{}]) +This pattern is a placeholder for an insn that consists of a +@code{parallel} expression with a variable number of elements. This +expression should only appear at the top level of an insn pattern. + +When constructing an insn, operand number @var{n} will be substituted at +this point. When matching an insn, it matches if the body of the insn +is a @code{parallel} expression with at least as many elements as the +vector of @var{subpat} expressions in the @code{match_parallel}, if each +@var{subpat} matches the corresponding element of the @code{parallel}, +@emph{and} the function @var{predicate} returns nonzero on the +@code{parallel} that is the body of the insn. It is the responsibility +of the predicate to validate elements of the @code{parallel} beyond +those listed in the @code{match_parallel}.@refill + +A typical use of @code{match_parallel} is to match load and store +multiple expressions, which can contain a variable number of elements +in a @code{parallel}. For example, +@c the following is *still* going over. need to change the code. +@c also need to work on grouping of this example. --mew 1feb93 + +@smallexample +(define_insn "" + [(match_parallel 0 "load_multiple_operation" + [(set (match_operand:SI 1 "gpc_reg_operand" "=r") + (match_operand:SI 2 "memory_operand" "m")) + (use (reg:SI 179)) + (clobber (reg:SI 179))])] + "" + "loadm 0,0,%1,%2") +@end smallexample + +This example comes from @file{a29k.md}. The function +@code{load_multiple_operations} is defined in @file{a29k.c} and checks +that subsequent elements in the @code{parallel} are the same as the +@code{set} in the pattern, except that they are referencing subsequent +registers and memory locations. + +An insn that matches this pattern might look like: + +@smallexample +(parallel + [(set (reg:SI 20) (mem:SI (reg:SI 100))) + (use (reg:SI 179)) + (clobber (reg:SI 179)) + (set (reg:SI 21) + (mem:SI (plus:SI (reg:SI 100) + (const_int 4)))) + (set (reg:SI 22) + (mem:SI (plus:SI (reg:SI 100) + (const_int 8))))]) +@end smallexample + +@findex match_par_dup +@item (match_par_dup @var{n} [@var{subpat}@dots{}]) +Like @code{match_op_dup}, but for @code{match_parallel} instead of +@code{match_operator}. + +@findex match_insn +@item (match_insn @var{predicate}) +Match a complete insn. Unlike the other @code{match_*} recognizers, +@code{match_insn} does not take an operand number. + +The machine mode @var{m} of @code{match_insn} works like that of +@code{match_operand}: it is passed as the second argument to the +predicate function, and that function is solely responsible for +deciding whether the expression to be matched ``has'' that mode. + +@findex match_insn2 +@item (match_insn2 @var{n} @var{predicate}) +Match a complete insn. + +The machine mode @var{m} of @code{match_insn2} works like that of +@code{match_operand}: it is passed as the second argument to the +predicate function, and that function is solely responsible for +deciding whether the expression to be matched ``has'' that mode. + +@findex address +@item (address (match_operand:@var{m} @var{n} "address_operand" "")) +This complex of expressions is a placeholder for an operand number +@var{n} in a ``load address'' instruction: an operand which specifies +a memory location in the usual way, but for which the actual operand +value used is the address of the location, not the contents of the +location. + +@code{address} expressions never appear in RTL code, only in machine +descriptions. And they are used only in machine descriptions that do +not use the operand constraint feature. When operand constraints are +in use, the letter @samp{p} in the constraint serves this purpose. + +@var{m} is the machine mode of the @emph{memory location being +addressed}, not the machine mode of the address itself. That mode is +always the same on a given target machine (it is @code{Pmode}, which +normally is @code{SImode}), so there is no point in mentioning it; +thus, no machine mode is written in the @code{address} expression. If +some day support is added for machines in which addresses of different +kinds of objects appear differently or are used differently (such as +the PDP-10), different formats would perhaps need different machine +modes and these modes might be written in the @code{address} +expression. +@end table + +@node Output Template +@section Output Templates and Operand Substitution +@cindex output templates +@cindex operand substitution + +@cindex @samp{%} in template +@cindex percent sign +The @dfn{output template} is a string which specifies how to output the +assembler code for an instruction pattern. Most of the template is a +fixed string which is output literally. The character @samp{%} is used +to specify where to substitute an operand; it can also be used to +identify places where different variants of the assembler require +different syntax. + +In the simplest case, a @samp{%} followed by a digit @var{n} says to output +operand @var{n} at that point in the string. + +@samp{%} followed by a letter and a digit says to output an operand in an +alternate fashion. Four letters have standard, built-in meanings described +below. The machine description macro @code{PRINT_OPERAND} can define +additional letters with nonstandard meanings. + +@samp{%c@var{digit}} can be used to substitute an operand that is a +constant value without the syntax that normally indicates an immediate +operand. + +@samp{%n@var{digit}} is like @samp{%c@var{digit}} except that the value of +the constant is negated before printing. + +@samp{%a@var{digit}} can be used to substitute an operand as if it were a +memory reference, with the actual operand treated as the address. This may +be useful when outputting a ``load address'' instruction, because often the +assembler syntax for such an instruction requires you to write the operand +as if it were a memory reference. + +@samp{%l@var{digit}} is used to substitute a @code{label_ref} into a jump +instruction. + +@samp{%=} outputs a number which is unique to each instruction in the +entire compilation. This is useful for making local labels to be +referred to more than once in a single template that generates multiple +assembler instructions. + +@samp{%} followed by a punctuation character specifies a substitution that +does not use an operand. Only one case is standard: @samp{%%} outputs a +@samp{%} into the assembler code. Other nonstandard cases can be +defined in the @code{PRINT_OPERAND} macro. You must also define +which punctuation characters are valid with the +@code{PRINT_OPERAND_PUNCT_VALID_P} macro. + +@cindex \ +@cindex backslash +The template may generate multiple assembler instructions. Write the text +for the instructions, with @samp{\;} between them. + +@cindex matching operands +When the RTL contains two operands which are required by constraint to match +each other, the output template must refer only to the lower-numbered operand. +Matching operands are not always identical, and the rest of the compiler +arranges to put the proper RTL expression for printing into the lower-numbered +operand. + +One use of nonstandard letters or punctuation following @samp{%} is to +distinguish between different assembler languages for the same machine; for +example, Motorola syntax versus MIT syntax for the 68000. Motorola syntax +requires periods in most opcode names, while MIT syntax does not. For +example, the opcode @samp{movel} in MIT syntax is @samp{move.l} in Motorola +syntax. The same file of patterns is used for both kinds of output syntax, +but the character sequence @samp{%.} is used in each place where Motorola +syntax wants a period. The @code{PRINT_OPERAND} macro for Motorola syntax +defines the sequence to output a period; the macro for MIT syntax defines +it to do nothing. + +@cindex @code{#} in template +As a special case, a template consisting of the single character @code{#} +instructs the compiler to first split the insn, and then output the +resulting instructions separately. This helps eliminate redundancy in the +output templates. If you have a @code{define_insn} that needs to emit +multiple assembler instructions, and there is an matching @code{define_split} +already defined, then you can simply use @code{#} as the output template +instead of writing an output template that emits the multiple assembler +instructions. + +If the macro @code{ASSEMBLER_DIALECT} is defined, you can use construct +of the form @samp{@{option0|option1|option2@}} in the templates. These +describe multiple variants of assembler language syntax. +@xref{Instruction Output}. + +@node Output Statement +@section C Statements for Assembler Output +@cindex output statements +@cindex C statements for assembler output +@cindex generating assembler output + +Often a single fixed template string cannot produce correct and efficient +assembler code for all the cases that are recognized by a single +instruction pattern. For example, the opcodes may depend on the kinds of +operands; or some unfortunate combinations of operands may require extra +machine instructions. + +If the output control string starts with a @samp{@@}, then it is actually +a series of templates, each on a separate line. (Blank lines and +leading spaces and tabs are ignored.) The templates correspond to the +pattern's constraint alternatives (@pxref{Multi-Alternative}). For example, +if a target machine has a two-address add instruction @samp{addr} to add +into a register and another @samp{addm} to add a register to memory, you +might write this pattern: + +@smallexample +(define_insn "addsi3" + [(set (match_operand:SI 0 "general_operand" "=r,m") + (plus:SI (match_operand:SI 1 "general_operand" "0,0") + (match_operand:SI 2 "general_operand" "g,r")))] + "" + "@@ + addr %2,%0 + addm %2,%0") +@end smallexample + +@cindex @code{*} in template +@cindex asterisk in template +If the output control string starts with a @samp{*}, then it is not an +output template but rather a piece of C program that should compute a +template. It should execute a @code{return} statement to return the +template-string you want. Most such templates use C string literals, which +require doublequote characters to delimit them. To include these +doublequote characters in the string, prefix each one with @samp{\}. + +The operands may be found in the array @code{operands}, whose C data type +is @code{rtx []}. + +It is very common to select different ways of generating assembler code +based on whether an immediate operand is within a certain range. Be +careful when doing this, because the result of @code{INTVAL} is an +integer on the host machine. If the host machine has more bits in an +@code{int} than the target machine has in the mode in which the constant +will be used, then some of the bits you get from @code{INTVAL} will be +superfluous. For proper results, you must carefully disregard the +values of those bits. + +@findex output_asm_insn +It is possible to output an assembler instruction and then go on to output +or compute more of them, using the subroutine @code{output_asm_insn}. This +receives two arguments: a template-string and a vector of operands. The +vector may be @code{operands}, or it may be another array of @code{rtx} +that you declare locally and initialize yourself. + +@findex which_alternative +When an insn pattern has multiple alternatives in its constraints, often +the appearance of the assembler code is determined mostly by which alternative +was matched. When this is so, the C code can test the variable +@code{which_alternative}, which is the ordinal number of the alternative +that was actually satisfied (0 for the first, 1 for the second alternative, +etc.). + +For example, suppose there are two opcodes for storing zero, @samp{clrreg} +for registers and @samp{clrmem} for memory locations. Here is how +a pattern could use @code{which_alternative} to choose between them: + +@smallexample +(define_insn "" + [(set (match_operand:SI 0 "general_operand" "=r,m") + (const_int 0))] + "" + "* + return (which_alternative == 0 + ? \"clrreg %0\" : \"clrmem %0\"); + ") +@end smallexample + +The example above, where the assembler code to generate was +@emph{solely} determined by the alternative, could also have been specified +as follows, having the output control string start with a @samp{@@}: + +@smallexample +@group +(define_insn "" + [(set (match_operand:SI 0 "general_operand" "=r,m") + (const_int 0))] + "" + "@@ + clrreg %0 + clrmem %0") +@end group +@end smallexample +@end ifset + +@c Most of this node appears by itself (in a different place) even +@c when the INTERNALS flag is clear. Passages that require the full +@c manual's context are conditionalized to appear only in the full manual. +@ifset INTERNALS +@node Constraints +@section Operand Constraints +@cindex operand constraints +@cindex constraints + +Each @code{match_operand} in an instruction pattern can specify a +constraint for the type of operands allowed. +@end ifset +@ifclear INTERNALS +@node Constraints +@section Constraints for @code{asm} Operands +@cindex operand constraints, @code{asm} +@cindex constraints, @code{asm} +@cindex @code{asm} constraints + +Here are specific details on what constraint letters you can use with +@code{asm} operands. +@end ifclear +Constraints can say whether +an operand may be in a register, and which kinds of register; whether the +operand can be a memory reference, and which kinds of address; whether the +operand may be an immediate constant, and which possible values it may +have. Constraints can also require two operands to match. + +@ifset INTERNALS +@menu +* Simple Constraints:: Basic use of constraints. +* Multi-Alternative:: When an insn has two alternative constraint-patterns. +* Class Preferences:: Constraints guide which hard register to put things in. +* Modifiers:: More precise control over effects of constraints. +* Machine Constraints:: Existing constraints for some particular machines. +* No Constraints:: Describing a clean machine without constraints. +@end menu +@end ifset + +@ifclear INTERNALS +@menu +* Simple Constraints:: Basic use of constraints. +* Multi-Alternative:: When an insn has two alternative constraint-patterns. +* Modifiers:: More precise control over effects of constraints. +* Machine Constraints:: Special constraints for some particular machines. +@end menu +@end ifclear + +@node Simple Constraints +@subsection Simple Constraints +@cindex simple constraints + +The simplest kind of constraint is a string full of letters, each of +which describes one kind of operand that is permitted. Here are +the letters that are allowed: + +@table @asis +@cindex @samp{m} in constraint +@cindex memory references in constraints +@item @samp{m} +A memory operand is allowed, with any kind of address that the machine +supports in general. + +@cindex offsettable address +@cindex @samp{o} in constraint +@item @samp{o} +A memory operand is allowed, but only if the address is +@dfn{offsettable}. This means that adding a small integer (actually, +the width in bytes of the operand, as determined by its machine mode) +may be added to the address and the result is also a valid memory +address. + +@cindex autoincrement/decrement addressing +For example, an address which is constant is offsettable; so is an +address that is the sum of a register and a constant (as long as a +slightly larger constant is also within the range of address-offsets +supported by the machine); but an autoincrement or autodecrement +address is not offsettable. More complicated indirect/indexed +addresses may or may not be offsettable depending on the other +addressing modes that the machine supports. + +Note that in an output operand which can be matched by another +operand, the constraint letter @samp{o} is valid only when accompanied +by both @samp{<} (if the target machine has predecrement addressing) +and @samp{>} (if the target machine has preincrement addressing). + +@cindex @samp{V} in constraint +@item @samp{V} +A memory operand that is not offsettable. In other words, anything that +would fit the @samp{m} constraint but not the @samp{o} constraint. + +@cindex @samp{<} in constraint +@item @samp{<} +A memory operand with autodecrement addressing (either predecrement or +postdecrement) is allowed. + +@cindex @samp{>} in constraint +@item @samp{>} +A memory operand with autoincrement addressing (either preincrement or +postincrement) is allowed. + +@cindex @samp{r} in constraint +@cindex registers in constraints +@item @samp{r} +A register operand is allowed provided that it is in a general +register. + +@cindex @samp{d} in constraint +@item @samp{d}, @samp{a}, @samp{f}, @dots{} +Other letters can be defined in machine-dependent fashion to stand for +particular classes of registers. @samp{d}, @samp{a} and @samp{f} are +defined on the 68000/68020 to stand for data, address and floating +point registers. + +@cindex constants in constraints +@cindex @samp{i} in constraint +@item @samp{i} +An immediate integer operand (one with constant value) is allowed. +This includes symbolic constants whose values will be known only at +assembly time. + +@cindex @samp{n} in constraint +@item @samp{n} +An immediate integer operand with a known numeric value is allowed. +Many systems cannot support assembly-time constants for operands less +than a word wide. Constraints for these operands should use @samp{n} +rather than @samp{i}. + +@cindex @samp{I} in constraint +@item @samp{I}, @samp{J}, @samp{K}, @dots{} @samp{P} +Other letters in the range @samp{I} through @samp{P} may be defined in +a machine-dependent fashion to permit immediate integer operands with +explicit integer values in specified ranges. For example, on the +68000, @samp{I} is defined to stand for the range of values 1 to 8. +This is the range permitted as a shift count in the shift +instructions. + +@cindex @samp{E} in constraint +@item @samp{E} +An immediate floating operand (expression code @code{const_double}) is +allowed, but only if the target floating point format is the same as +that of the host machine (on which the compiler is running). + +@cindex @samp{F} in constraint +@item @samp{F} +An immediate floating operand (expression code @code{const_double}) is +allowed. + +@cindex @samp{G} in constraint +@cindex @samp{H} in constraint +@item @samp{G}, @samp{H} +@samp{G} and @samp{H} may be defined in a machine-dependent fashion to +permit immediate floating operands in particular ranges of values. + +@cindex @samp{s} in constraint +@item @samp{s} +An immediate integer operand whose value is not an explicit integer is +allowed. + +This might appear strange; if an insn allows a constant operand with a +value not known at compile time, it certainly must allow any known +value. So why use @samp{s} instead of @samp{i}? Sometimes it allows +better code to be generated. + +For example, on the 68000 in a fullword instruction it is possible to +use an immediate operand; but if the immediate value is between -128 +and 127, better code results from loading the value into a register and +using the register. This is because the load into the register can be +done with a @samp{moveq} instruction. We arrange for this to happen +by defining the letter @samp{K} to mean ``any integer outside the +range -128 to 127'', and then specifying @samp{Ks} in the operand +constraints. + +@cindex @samp{g} in constraint +@item @samp{g} +Any register, memory or immediate integer operand is allowed, except for +registers that are not general registers. + +@cindex @samp{X} in constraint +@item @samp{X} +@ifset INTERNALS +Any operand whatsoever is allowed, even if it does not satisfy +@code{general_operand}. This is normally used in the constraint of +a @code{match_scratch} when certain alternatives will not actually +require a scratch register. +@end ifset +@ifclear INTERNALS +Any operand whatsoever is allowed. +@end ifclear + +@cindex @samp{0} in constraint +@cindex digits in constraint +@item @samp{0}, @samp{1}, @samp{2}, @dots{} @samp{9} +An operand that matches the specified operand number is allowed. If a +digit is used together with letters within the same alternative, the +digit should come last. + +@cindex matching constraint +@cindex constraint, matching +This is called a @dfn{matching constraint} and what it really means is +that the assembler has only a single operand that fills two roles +@ifset INTERNALS +considered separate in the RTL insn. For example, an add insn has two +input operands and one output operand in the RTL, but on most CISC +@end ifset +@ifclear INTERNALS +which @code{asm} distinguishes. For example, an add instruction uses +two input operands and an output operand, but on most CISC +@end ifclear +machines an add instruction really has only two operands, one of them an +input-output operand: + +@smallexample +addl #35,r12 +@end smallexample + +Matching constraints are used in these circumstances. +More precisely, the two operands that match must include one input-only +operand and one output-only operand. Moreover, the digit must be a +smaller number than the number of the operand that uses it in the +constraint. + +@ifset INTERNALS +For operands to match in a particular case usually means that they +are identical-looking RTL expressions. But in a few special cases +specific kinds of dissimilarity are allowed. For example, @code{*x} +as an input operand will match @code{*x++} as an output operand. +For proper results in such cases, the output template should always +use the output-operand's number when printing the operand. +@end ifset + +@cindex load address instruction +@cindex push address instruction +@cindex address constraints +@cindex @samp{p} in constraint +@item @samp{p} +An operand that is a valid memory address is allowed. This is +for ``load address'' and ``push address'' instructions. + +@findex address_operand +@samp{p} in the constraint must be accompanied by @code{address_operand} +as the predicate in the @code{match_operand}. This predicate interprets +the mode specified in the @code{match_operand} as the mode of the memory +reference for which the address would be valid. + +@cindex extensible constraints +@cindex @samp{Q}, in constraint +@item @samp{Q}, @samp{R}, @samp{S}, @dots{} @samp{U} +Letters in the range @samp{Q} through @samp{U} may be defined in a +machine-dependent fashion to stand for arbitrary operand types. +@ifset INTERNALS +The machine description macro @code{EXTRA_CONSTRAINT} is passed the +operand as its first argument and the constraint letter as its +second operand. + +A typical use for this would be to distinguish certain types of +memory references that affect other insn operands. + +Do not define these constraint letters to accept register references +(@code{reg}); the reload pass does not expect this and would not handle +it properly. +@end ifset +@end table + +@ifset INTERNALS +In order to have valid assembler code, each operand must satisfy +its constraint. But a failure to do so does not prevent the pattern +from applying to an insn. Instead, it directs the compiler to modify +the code so that the constraint will be satisfied. Usually this is +done by copying an operand into a register. + +Contrast, therefore, the two instruction patterns that follow: + +@smallexample +(define_insn "" + [(set (match_operand:SI 0 "general_operand" "=r") + (plus:SI (match_dup 0) + (match_operand:SI 1 "general_operand" "r")))] + "" + "@dots{}") +@end smallexample + +@noindent +which has two operands, one of which must appear in two places, and + +@smallexample +(define_insn "" + [(set (match_operand:SI 0 "general_operand" "=r") + (plus:SI (match_operand:SI 1 "general_operand" "0") + (match_operand:SI 2 "general_operand" "r")))] + "" + "@dots{}") +@end smallexample + +@noindent +which has three operands, two of which are required by a constraint to be +identical. If we are considering an insn of the form + +@smallexample +(insn @var{n} @var{prev} @var{next} + (set (reg:SI 3) + (plus:SI (reg:SI 6) (reg:SI 109))) + @dots{}) +@end smallexample + +@noindent +the first pattern would not apply at all, because this insn does not +contain two identical subexpressions in the right place. The pattern would +say, ``That does not look like an add instruction; try other patterns.'' +The second pattern would say, ``Yes, that's an add instruction, but there +is something wrong with it.'' It would direct the reload pass of the +compiler to generate additional insns to make the constraint true. The +results might look like this: + +@smallexample +(insn @var{n2} @var{prev} @var{n} + (set (reg:SI 3) (reg:SI 6)) + @dots{}) + +(insn @var{n} @var{n2} @var{next} + (set (reg:SI 3) + (plus:SI (reg:SI 3) (reg:SI 109))) + @dots{}) +@end smallexample + +It is up to you to make sure that each operand, in each pattern, has +constraints that can handle any RTL expression that could be present for +that operand. (When multiple alternatives are in use, each pattern must, +for each possible combination of operand expressions, have at least one +alternative which can handle that combination of operands.) The +constraints don't need to @emph{allow} any possible operand---when this is +the case, they do not constrain---but they must at least point the way to +reloading any possible operand so that it will fit. + +@itemize @bullet +@item +If the constraint accepts whatever operands the predicate permits, +there is no problem: reloading is never necessary for this operand. + +For example, an operand whose constraints permit everything except +registers is safe provided its predicate rejects registers. + +An operand whose predicate accepts only constant values is safe +provided its constraints include the letter @samp{i}. If any possible +constant value is accepted, then nothing less than @samp{i} will do; +if the predicate is more selective, then the constraints may also be +more selective. + +@item +Any operand expression can be reloaded by copying it into a register. +So if an operand's constraints allow some kind of register, it is +certain to be safe. It need not permit all classes of registers; the +compiler knows how to copy a register into another register of the +proper class in order to make an instruction valid. + +@cindex nonoffsettable memory reference +@cindex memory reference, nonoffsettable +@item +A nonoffsettable memory reference can be reloaded by copying the +address into a register. So if the constraint uses the letter +@samp{o}, all memory references are taken care of. + +@item +A constant operand can be reloaded by allocating space in memory to +hold it as preinitialized data. Then the memory reference can be used +in place of the constant. So if the constraint uses the letters +@samp{o} or @samp{m}, constant operands are not a problem. + +@item +If the constraint permits a constant and a pseudo register used in an insn +was not allocated to a hard register and is equivalent to a constant, +the register will be replaced with the constant. If the predicate does +not permit a constant and the insn is re-recognized for some reason, the +compiler will crash. Thus the predicate must always recognize any +objects allowed by the constraint. +@end itemize + +If the operand's predicate can recognize registers, but the constraint does +not permit them, it can make the compiler crash. When this operand happens +to be a register, the reload pass will be stymied, because it does not know +how to copy a register temporarily into memory. + +If the predicate accepts a unary operator, the constraint applies to the +operand. For example, the MIPS processor at ISA level 3 supports an +instruction which adds two registers in @code{SImode} to produce a +@code{DImode} result, but only if the registers are correctly sign +extended. This predicate for the input operands accepts a +@code{sign_extend} of an @code{SImode} register. Write the constraint +to indicate the type of register that is required for the operand of the +@code{sign_extend}. +@end ifset + +@node Multi-Alternative +@subsection Multiple Alternative Constraints +@cindex multiple alternative constraints + +Sometimes a single instruction has multiple alternative sets of possible +operands. For example, on the 68000, a logical-or instruction can combine +register or an immediate value into memory, or it can combine any kind of +operand into a register; but it cannot combine one memory location into +another. + +These constraints are represented as multiple alternatives. An alternative +can be described by a series of letters for each operand. The overall +constraint for an operand is made from the letters for this operand +from the first alternative, a comma, the letters for this operand from +the second alternative, a comma, and so on until the last alternative. +@ifset INTERNALS +Here is how it is done for fullword logical-or on the 68000: + +@smallexample +(define_insn "iorsi3" + [(set (match_operand:SI 0 "general_operand" "=m,d") + (ior:SI (match_operand:SI 1 "general_operand" "%0,0") + (match_operand:SI 2 "general_operand" "dKs,dmKs")))] + @dots{}) +@end smallexample + +The first alternative has @samp{m} (memory) for operand 0, @samp{0} for +operand 1 (meaning it must match operand 0), and @samp{dKs} for operand +2. The second alternative has @samp{d} (data register) for operand 0, +@samp{0} for operand 1, and @samp{dmKs} for operand 2. The @samp{=} and +@samp{%} in the constraints apply to all the alternatives; their +meaning is explained in the next section (@pxref{Class Preferences}). +@end ifset + +@c FIXME Is this ? and ! stuff of use in asm()? If not, hide unless INTERNAL +If all the operands fit any one alternative, the instruction is valid. +Otherwise, for each alternative, the compiler counts how many instructions +must be added to copy the operands so that that alternative applies. +The alternative requiring the least copying is chosen. If two alternatives +need the same amount of copying, the one that comes first is chosen. +These choices can be altered with the @samp{?} and @samp{!} characters: + +@table @code +@cindex @samp{?} in constraint +@cindex question mark +@item ? +Disparage slightly the alternative that the @samp{?} appears in, +as a choice when no alternative applies exactly. The compiler regards +this alternative as one unit more costly for each @samp{?} that appears +in it. + +@cindex @samp{!} in constraint +@cindex exclamation point +@item ! +Disparage severely the alternative that the @samp{!} appears in. +This alternative can still be used if it fits without reloading, +but if reloading is needed, some other alternative will be used. +@end table + +@ifset INTERNALS +When an insn pattern has multiple alternatives in its constraints, often +the appearance of the assembler code is determined mostly by which +alternative was matched. When this is so, the C code for writing the +assembler code can use the variable @code{which_alternative}, which is +the ordinal number of the alternative that was actually satisfied (0 for +the first, 1 for the second alternative, etc.). @xref{Output Statement}. +@end ifset + +@ifset INTERNALS +@node Class Preferences +@subsection Register Class Preferences +@cindex class preference constraints +@cindex register class preference constraints + +@cindex voting between constraint alternatives +The operand constraints have another function: they enable the compiler +to decide which kind of hardware register a pseudo register is best +allocated to. The compiler examines the constraints that apply to the +insns that use the pseudo register, looking for the machine-dependent +letters such as @samp{d} and @samp{a} that specify classes of registers. +The pseudo register is put in whichever class gets the most ``votes''. +The constraint letters @samp{g} and @samp{r} also vote: they vote in +favor of a general register. The machine description says which registers +are considered general. + +Of course, on some machines all registers are equivalent, and no register +classes are defined. Then none of this complexity is relevant. +@end ifset + +@node Modifiers +@subsection Constraint Modifier Characters +@cindex modifiers in constraints +@cindex constraint modifier characters + +@c prevent bad page break with this line +Here are constraint modifier characters. + +@table @samp +@cindex @samp{=} in constraint +@item = +Means that this operand is write-only for this instruction: the previous +value is discarded and replaced by output data. + +@cindex @samp{+} in constraint +@item + +Means that this operand is both read and written by the instruction. + +When the compiler fixes up the operands to satisfy the constraints, +it needs to know which operands are inputs to the instruction and +which are outputs from it. @samp{=} identifies an output; @samp{+} +identifies an operand that is both input and output; all other operands +are assumed to be input only. + +@cindex @samp{&} in constraint +@cindex earlyclobber operand +@item & +Means (in a particular alternative) that this operand is an +@dfn{earlyclobber} operand, which is modified before the instruction is +finished using the input operands. Therefore, this operand may not lie +in a register that is used as an input operand or as part of any memory +address. + +@samp{&} applies only to the alternative in which it is written. In +constraints with multiple alternatives, sometimes one alternative +requires @samp{&} while others do not. See, for example, the +@samp{movdf} insn of the 68000. + +An input operand can be tied to an earlyclobber operand if its only +use as an input occurs before the early result is written. Adding +alternatives of this form often allows GCC to produce better code +when only some of the inputs can be affected by the earlyclobber. +See, for example, the @samp{mulsi3} insn of the ARM. + +@samp{&} does not obviate the need to write @samp{=}. + +@cindex @samp{%} in constraint +@item % +Declares the instruction to be commutative for this operand and the +following operand. This means that the compiler may interchange the +two operands if that is the cheapest way to make all operands fit the +constraints. +@ifset INTERNALS +This is often used in patterns for addition instructions +that really have only two operands: the result must go in one of the +arguments. Here for example, is how the 68000 halfword-add +instruction is defined: + +@smallexample +(define_insn "addhi3" + [(set (match_operand:HI 0 "general_operand" "=m,r") + (plus:HI (match_operand:HI 1 "general_operand" "%0,0") + (match_operand:HI 2 "general_operand" "di,g")))] + @dots{}) +@end smallexample +@end ifset + +@cindex @samp{#} in constraint +@item # +Says that all following characters, up to the next comma, are to be +ignored as a constraint. They are significant only for choosing +register preferences. + +@ifset INTERNALS +@cindex @samp{*} in constraint +@item * +Says that the following character should be ignored when choosing +register preferences. @samp{*} has no effect on the meaning of the +constraint as a constraint, and no effect on reloading. + +Here is an example: the 68000 has an instruction to sign-extend a +halfword in a data register, and can also sign-extend a value by +copying it into an address register. While either kind of register is +acceptable, the constraints on an address-register destination are +less strict, so it is best if register allocation makes an address +register its goal. Therefore, @samp{*} is used so that the @samp{d} +constraint letter (for data register) is ignored when computing +register preferences. + +@smallexample +(define_insn "extendhisi2" + [(set (match_operand:SI 0 "general_operand" "=*d,a") + (sign_extend:SI + (match_operand:HI 1 "general_operand" "0,g")))] + @dots{}) +@end smallexample +@end ifset +@end table + +@node Machine Constraints +@subsection Constraints for Particular Machines +@cindex machine specific constraints +@cindex constraints, machine specific + +Whenever possible, you should use the general-purpose constraint letters +in @code{asm} arguments, since they will convey meaning more readily to +people reading your code. Failing that, use the constraint letters +that usually have very similar meanings across architectures. The most +commonly used constraints are @samp{m} and @samp{r} (for memory and +general-purpose registers respectively; @pxref{Simple Constraints}), and +@samp{I}, usually the letter indicating the most common +immediate-constant format. + +For each machine architecture, the @file{config/@var{machine}.h} file +defines additional constraints. These constraints are used by the +compiler itself for instruction generation, as well as for @code{asm} +statements; therefore, some of the constraints are not particularly +interesting for @code{asm}. The constraints are defined through these +macros: + +@table @code +@item REG_CLASS_FROM_LETTER +Register class constraints (usually lower case). + +@item CONST_OK_FOR_LETTER_P +Immediate constant constraints, for non-floating point constants of +word size or smaller precision (usually upper case). + +@item CONST_DOUBLE_OK_FOR_LETTER_P +Immediate constant constraints, for all floating point constants and for +constants of greater than word size precision (usually upper case). + +@item EXTRA_CONSTRAINT +Special cases of registers or memory. This macro is not required, and +is only defined for some machines. +@end table + +Inspecting these macro definitions in the compiler source for your +machine is the best way to be certain you have the right constraints. +However, here is a summary of the machine-dependent constraints +available on some particular machines. + +@table @emph +@item ARM family---@file{arm.h} +@table @code +@item f +Floating-point register + +@item F +One of the floating-point constants 0.0, 0.5, 1.0, 2.0, 3.0, 4.0, 5.0 +or 10.0 + +@item G +Floating-point constant that would satisfy the constraint @samp{F} if it +were negated + +@item I +Integer that is valid as an immediate operand in a data processing +instruction. That is, an integer in the range 0 to 255 rotated by a +multiple of 2 + +@item J +Integer in the range -4095 to 4095 + +@item K +Integer that satisfies constraint @samp{I} when inverted (ones complement) + +@item L +Integer that satisfies constraint @samp{I} when negated (twos complement) + +@item M +Integer in the range 0 to 32 + +@item Q +A memory reference where the exact address is in a single register +(`@samp{m}' is preferable for @code{asm} statements) + +@item R +An item in the constant pool + +@item S +A symbol in the text segment of the current file +@end table + +@item AMD 29000 family---@file{a29k.h} +@table @code +@item l +Local register 0 + +@item b +Byte Pointer (@samp{BP}) register + +@item q +@samp{Q} register + +@item h +Special purpose register + +@item A +First accumulator register + +@item a +Other accumulator register + +@item f +Floating point register + +@item I +Constant greater than 0, less than 0x100 + +@item J +Constant greater than 0, less than 0x10000 + +@item K +Constant whose high 24 bits are on (1) + +@item L +16 bit constant whose high 8 bits are on (1) + +@item M +32 bit constant whose high 16 bits are on (1) + +@item N +32 bit negative constant that fits in 8 bits + +@item O +The constant 0x80000000 or, on the 29050, any 32 bit constant +whose low 16 bits are 0. + +@item P +16 bit negative constant that fits in 8 bits + +@item G +@itemx H +A floating point constant (in @code{asm} statements, use the machine +independent @samp{E} or @samp{F} instead) +@end table + +@item IBM RS6000---@file{rs6000.h} +@table @code +@item b +Address base register + +@item f +Floating point register + +@item h +@samp{MQ}, @samp{CTR}, or @samp{LINK} register + +@item q +@samp{MQ} register + +@item c +@samp{CTR} register + +@item l +@samp{LINK} register + +@item x +@samp{CR} register (condition register) number 0 + +@item y +@samp{CR} register (condition register) + +@item z +@samp{FPMEM} stack memory for FPR-GPR transfers + +@item I +Signed 16 bit constant + +@item J +Constant whose low 16 bits are 0 + +@item K +Constant whose high 16 bits are 0 + +@item L +Constant suitable as a mask operand + +@item M +Constant larger than 31 + +@item N +Exact power of 2 + +@item O +Zero + +@item P +Constant whose negation is a signed 16 bit constant + +@item G +Floating point constant that can be loaded into a register with one +instruction per word + +@item Q +Memory operand that is an offset from a register (@samp{m} is preferable +for @code{asm} statements) + +@item R +AIX TOC entry + +@item S +Constant suitable as a 64-bit mask operand + +@item U +System V Release 4 small data area reference +@end table + +@item Intel 386---@file{i386.h} +@table @code +@item q +@samp{a}, @code{b}, @code{c}, or @code{d} register + +@item A +@samp{a}, or @code{d} register (for 64-bit ints) + +@item f +Floating point register + +@item t +First (top of stack) floating point register + +@item u +Second floating point register + +@item a +@samp{a} register + +@item b +@samp{b} register + +@item c +@samp{c} register + +@item d +@samp{d} register + +@item D +@samp{di} register + +@item S +@samp{si} register + +@item I +Constant in range 0 to 31 (for 32 bit shifts) + +@item J +Constant in range 0 to 63 (for 64 bit shifts) + +@item K +@samp{0xff} + +@item L +@samp{0xffff} + +@item M +0, 1, 2, or 3 (shifts for @code{lea} instruction) + +@item N +Constant in range 0 to 255 (for @code{out} instruction) + +@item G +Standard 80387 floating point constant +@end table + +@item Intel 960---@file{i960.h} +@table @code +@item f +Floating point register (@code{fp0} to @code{fp3}) + +@item l +Local register (@code{r0} to @code{r15}) + +@item b +Global register (@code{g0} to @code{g15}) + +@item d +Any local or global register + +@item I +Integers from 0 to 31 + +@item J +0 + +@item K +Integers from -31 to 0 + +@item G +Floating point 0 + +@item H +Floating point 1 +@end table + +@item MIPS---@file{mips.h} +@table @code +@item d +General-purpose integer register + +@item f +Floating-point register (if available) + +@item h +@samp{Hi} register + +@item l +@samp{Lo} register + +@item x +@samp{Hi} or @samp{Lo} register + +@item y +General-purpose integer register + +@item z +Floating-point status register + +@item I +Signed 16 bit constant (for arithmetic instructions) + +@item J +Zero + +@item K +Zero-extended 16-bit constant (for logic instructions) + +@item L +Constant with low 16 bits zero (can be loaded with @code{lui}) + +@item M +32 bit constant which requires two instructions to load (a constant +which is not @samp{I}, @samp{K}, or @samp{L}) + +@item N +Negative 16 bit constant + +@item O +Exact power of two + +@item P +Positive 16 bit constant + +@item G +Floating point zero + +@item Q +Memory reference that can be loaded with more than one instruction +(@samp{m} is preferable for @code{asm} statements) + +@item R +Memory reference that can be loaded with one instruction +(@samp{m} is preferable for @code{asm} statements) + +@item S +Memory reference in external OSF/rose PIC format +(@samp{m} is preferable for @code{asm} statements) +@end table + +@item Motorola 680x0---@file{m68k.h} +@table @code +@item a +Address register + +@item d +Data register + +@item f +68881 floating-point register, if available + +@item x +Sun FPA (floating-point) register, if available + +@item y +First 16 Sun FPA registers, if available + +@item I +Integer in the range 1 to 8 + +@item J +16 bit signed number + +@item K +Signed number whose magnitude is greater than 0x80 + +@item L +Integer in the range -8 to -1 + +@item M +Signed number whose magnitude is greater than 0x100 + +@item G +Floating point constant that is not a 68881 constant + +@item H +Floating point constant that can be used by Sun FPA +@end table + +@need 1000 +@item SPARC---@file{sparc.h} +@table @code +@item f +Floating-point register that can hold 32 or 64 bit values. + +@item e +Floating-point register that can hold 64 or 128 bit values. + +@item I +Signed 13 bit constant + +@item J +Zero + +@item K +32 bit constant with the low 12 bits clear (a constant that can be +loaded with the @code{sethi} instruction) + +@item G +Floating-point zero + +@item H +Signed 13 bit constant, sign-extended to 32 or 64 bits + +@item Q +Memory reference that can be loaded with one instruction (@samp{m} is +more appropriate for @code{asm} statements) + +@item S +Constant, or memory address + +@item T +Memory address aligned to an 8-byte boundary + +@item U +Even register +@end table +@end table + +@ifset INTERNALS +@node No Constraints +@subsection Not Using Constraints +@cindex no constraints +@cindex not using constraints + +Some machines are so clean that operand constraints are not required. For +example, on the Vax, an operand valid in one context is valid in any other +context. On such a machine, every operand constraint would be @samp{g}, +excepting only operands of ``load address'' instructions which are +written as if they referred to a memory location's contents but actual +refer to its address. They would have constraint @samp{p}. + +@cindex empty constraints +For such machines, instead of writing @samp{g} and @samp{p} for all +the constraints, you can choose to write a description with empty constraints. +Then you write @samp{""} for the constraint in every @code{match_operand}. +Address operands are identified by writing an @code{address} expression +around the @code{match_operand}, not by their constraints. + +When the machine description has just empty constraints, certain parts +of compilation are skipped, making the compiler faster. However, +few machines actually do not need constraints; all machine descriptions +now in existence use constraints. +@end ifset + +@ifset INTERNALS +@node Standard Names +@section Standard Pattern Names For Generation +@cindex standard pattern names +@cindex pattern names +@cindex names, pattern + +Here is a table of the instruction names that are meaningful in the RTL +generation pass of the compiler. Giving one of these names to an +instruction pattern tells the RTL generation pass that it can use the +pattern to accomplish a certain task. + +@table @asis +@cindex @code{mov@var{m}} instruction pattern +@item @samp{mov@var{m}} +Here @var{m} stands for a two-letter machine mode name, in lower case. +This instruction pattern moves data with that machine mode from operand +1 to operand 0. For example, @samp{movsi} moves full-word data. + +If operand 0 is a @code{subreg} with mode @var{m} of a register whose +own mode is wider than @var{m}, the effect of this instruction is +to store the specified value in the part of the register that corresponds +to mode @var{m}. The effect on the rest of the register is undefined. + +This class of patterns is special in several ways. First of all, each +of these names @emph{must} be defined, because there is no other way +to copy a datum from one place to another. + +Second, these patterns are not used solely in the RTL generation pass. +Even the reload pass can generate move insns to copy values from stack +slots into temporary registers. When it does so, one of the operands is +a hard register and the other is an operand that can need to be reloaded +into a register. + +@findex force_reg +Therefore, when given such a pair of operands, the pattern must generate +RTL which needs no reloading and needs no temporary registers---no +registers other than the operands. For example, if you support the +pattern with a @code{define_expand}, then in such a case the +@code{define_expand} mustn't call @code{force_reg} or any other such +function which might generate new pseudo registers. + +This requirement exists even for subword modes on a RISC machine where +fetching those modes from memory normally requires several insns and +some temporary registers. Look in @file{spur.md} to see how the +requirement can be satisfied. + +@findex change_address +During reload a memory reference with an invalid address may be passed +as an operand. Such an address will be replaced with a valid address +later in the reload pass. In this case, nothing may be done with the +address except to use it as it stands. If it is copied, it will not be +replaced with a valid address. No attempt should be made to make such +an address into a valid address and no routine (such as +@code{change_address}) that will do so may be called. Note that +@code{general_operand} will fail when applied to such an address. + +@findex reload_in_progress +The global variable @code{reload_in_progress} (which must be explicitly +declared if required) can be used to determine whether such special +handling is required. + +The variety of operands that have reloads depends on the rest of the +machine description, but typically on a RISC machine these can only be +pseudo registers that did not get hard registers, while on other +machines explicit memory references will get optional reloads. + +If a scratch register is required to move an object to or from memory, +it can be allocated using @code{gen_reg_rtx} prior to life analysis. + +If there are cases needing +scratch registers after reload, you must define +@code{SECONDARY_INPUT_RELOAD_CLASS} and perhaps also +@code{SECONDARY_OUTPUT_RELOAD_CLASS} to detect them, and provide +patterns @samp{reload_in@var{m}} or @samp{reload_out@var{m}} to handle +them. @xref{Register Classes}. + +@findex no_new_pseudos +The global variable @code{no_new_pseudos} can be used to determine if it +is unsafe to create new pseudo registers. If this variable is nonzero, then +it is unsafe to call @code{gen_reg_rtx} to allocate a new pseudo. + +The constraints on a @samp{mov@var{m}} must permit moving any hard +register to any other hard register provided that +@code{HARD_REGNO_MODE_OK} permits mode @var{m} in both registers and +@code{REGISTER_MOVE_COST} applied to their classes returns a value of 2. + +It is obligatory to support floating point @samp{mov@var{m}} +instructions into and out of any registers that can hold fixed point +values, because unions and structures (which have modes @code{SImode} or +@code{DImode}) can be in those registers and they may have floating +point members. + +There may also be a need to support fixed point @samp{mov@var{m}} +instructions in and out of floating point registers. Unfortunately, I +have forgotten why this was so, and I don't know whether it is still +true. If @code{HARD_REGNO_MODE_OK} rejects fixed point values in +floating point registers, then the constraints of the fixed point +@samp{mov@var{m}} instructions must be designed to avoid ever trying to +reload into a floating point register. + +@cindex @code{reload_in} instruction pattern +@cindex @code{reload_out} instruction pattern +@item @samp{reload_in@var{m}} +@itemx @samp{reload_out@var{m}} +Like @samp{mov@var{m}}, but used when a scratch register is required to +move between operand 0 and operand 1. Operand 2 describes the scratch +register. See the discussion of the @code{SECONDARY_RELOAD_CLASS} +macro in @pxref{Register Classes}. + +@cindex @code{movstrict@var{m}} instruction pattern +@item @samp{movstrict@var{m}} +Like @samp{mov@var{m}} except that if operand 0 is a @code{subreg} +with mode @var{m} of a register whose natural mode is wider, +the @samp{movstrict@var{m}} instruction is guaranteed not to alter +any of the register except the part which belongs to mode @var{m}. + +@cindex @code{load_multiple} instruction pattern +@item @samp{load_multiple} +Load several consecutive memory locations into consecutive registers. +Operand 0 is the first of the consecutive registers, operand 1 +is the first memory location, and operand 2 is a constant: the +number of consecutive registers. + +Define this only if the target machine really has such an instruction; +do not define this if the most efficient way of loading consecutive +registers from memory is to do them one at a time. + +On some machines, there are restrictions as to which consecutive +registers can be stored into memory, such as particular starting or +ending register numbers or only a range of valid counts. For those +machines, use a @code{define_expand} (@pxref{Expander Definitions}) +and make the pattern fail if the restrictions are not met. + +Write the generated insn as a @code{parallel} with elements being a +@code{set} of one register from the appropriate memory location (you may +also need @code{use} or @code{clobber} elements). Use a +@code{match_parallel} (@pxref{RTL Template}) to recognize the insn. See +@file{a29k.md} and @file{rs6000.md} for examples of the use of this insn +pattern. + +@cindex @samp{store_multiple} instruction pattern +@item @samp{store_multiple} +Similar to @samp{load_multiple}, but store several consecutive registers +into consecutive memory locations. Operand 0 is the first of the +consecutive memory locations, operand 1 is the first register, and +operand 2 is a constant: the number of consecutive registers. + +@cindex @code{add@var{m}3} instruction pattern +@item @samp{add@var{m}3} +Add operand 2 and operand 1, storing the result in operand 0. All operands +must have mode @var{m}. This can be used even on two-address machines, by +means of constraints requiring operands 1 and 0 to be the same location. + +@cindex @code{sub@var{m}3} instruction pattern +@cindex @code{mul@var{m}3} instruction pattern +@cindex @code{div@var{m}3} instruction pattern +@cindex @code{udiv@var{m}3} instruction pattern +@cindex @code{mod@var{m}3} instruction pattern +@cindex @code{umod@var{m}3} instruction pattern +@cindex @code{smin@var{m}3} instruction pattern +@cindex @code{smax@var{m}3} instruction pattern +@cindex @code{umin@var{m}3} instruction pattern +@cindex @code{umax@var{m}3} instruction pattern +@cindex @code{and@var{m}3} instruction pattern +@cindex @code{ior@var{m}3} instruction pattern +@cindex @code{xor@var{m}3} instruction pattern +@item @samp{sub@var{m}3}, @samp{mul@var{m}3} +@itemx @samp{div@var{m}3}, @samp{udiv@var{m}3}, @samp{mod@var{m}3}, @samp{umod@var{m}3} +@itemx @samp{smin@var{m}3}, @samp{smax@var{m}3}, @samp{umin@var{m}3}, @samp{umax@var{m}3} +@itemx @samp{and@var{m}3}, @samp{ior@var{m}3}, @samp{xor@var{m}3} +Similar, for other arithmetic operations. + +@cindex @code{mulhisi3} instruction pattern +@item @samp{mulhisi3} +Multiply operands 1 and 2, which have mode @code{HImode}, and store +a @code{SImode} product in operand 0. + +@cindex @code{mulqihi3} instruction pattern +@cindex @code{mulsidi3} instruction pattern +@item @samp{mulqihi3}, @samp{mulsidi3} +Similar widening-multiplication instructions of other widths. + +@cindex @code{umulqihi3} instruction pattern +@cindex @code{umulhisi3} instruction pattern +@cindex @code{umulsidi3} instruction pattern +@item @samp{umulqihi3}, @samp{umulhisi3}, @samp{umulsidi3} +Similar widening-multiplication instructions that do unsigned +multiplication. + +@cindex @code{smul@var{m}3_highpart} instruction pattern +@item @samp{mul@var{m}3_highpart} +Perform a signed multiplication of operands 1 and 2, which have mode +@var{m}, and store the most significant half of the product in operand 0. +The least significant half of the product is discarded. + +@cindex @code{umul@var{m}3_highpart} instruction pattern +@item @samp{umul@var{m}3_highpart} +Similar, but the multiplication is unsigned. + +@cindex @code{divmod@var{m}4} instruction pattern +@item @samp{divmod@var{m}4} +Signed division that produces both a quotient and a remainder. +Operand 1 is divided by operand 2 to produce a quotient stored +in operand 0 and a remainder stored in operand 3. + +For machines with an instruction that produces both a quotient and a +remainder, provide a pattern for @samp{divmod@var{m}4} but do not +provide patterns for @samp{div@var{m}3} and @samp{mod@var{m}3}. This +allows optimization in the relatively common case when both the quotient +and remainder are computed. + +If an instruction that just produces a quotient or just a remainder +exists and is more efficient than the instruction that produces both, +write the output routine of @samp{divmod@var{m}4} to call +@code{find_reg_note} and look for a @code{REG_UNUSED} note on the +quotient or remainder and generate the appropriate instruction. + +@cindex @code{udivmod@var{m}4} instruction pattern +@item @samp{udivmod@var{m}4} +Similar, but does unsigned division. + +@cindex @code{ashl@var{m}3} instruction pattern +@item @samp{ashl@var{m}3} +Arithmetic-shift operand 1 left by a number of bits specified by operand +2, and store the result in operand 0. Here @var{m} is the mode of +operand 0 and operand 1; operand 2's mode is specified by the +instruction pattern, and the compiler will convert the operand to that +mode before generating the instruction. + +@cindex @code{ashr@var{m}3} instruction pattern +@cindex @code{lshr@var{m}3} instruction pattern +@cindex @code{rotl@var{m}3} instruction pattern +@cindex @code{rotr@var{m}3} instruction pattern +@item @samp{ashr@var{m}3}, @samp{lshr@var{m}3}, @samp{rotl@var{m}3}, @samp{rotr@var{m}3} +Other shift and rotate instructions, analogous to the +@code{ashl@var{m}3} instructions. + +@cindex @code{neg@var{m}2} instruction pattern +@item @samp{neg@var{m}2} +Negate operand 1 and store the result in operand 0. + +@cindex @code{abs@var{m}2} instruction pattern +@item @samp{abs@var{m}2} +Store the absolute value of operand 1 into operand 0. + +@cindex @code{sqrt@var{m}2} instruction pattern +@item @samp{sqrt@var{m}2} +Store the square root of operand 1 into operand 0. + +The @code{sqrt} built-in function of C always uses the mode which +corresponds to the C data type @code{double}. + +@cindex @code{ffs@var{m}2} instruction pattern +@item @samp{ffs@var{m}2} +Store into operand 0 one plus the index of the least significant 1-bit +of operand 1. If operand 1 is zero, store zero. @var{m} is the mode +of operand 0; operand 1's mode is specified by the instruction +pattern, and the compiler will convert the operand to that mode before +generating the instruction. + +The @code{ffs} built-in function of C always uses the mode which +corresponds to the C data type @code{int}. + +@cindex @code{one_cmpl@var{m}2} instruction pattern +@item @samp{one_cmpl@var{m}2} +Store the bitwise-complement of operand 1 into operand 0. + +@cindex @code{cmp@var{m}} instruction pattern +@item @samp{cmp@var{m}} +Compare operand 0 and operand 1, and set the condition codes. +The RTL pattern should look like this: + +@smallexample +(set (cc0) (compare (match_operand:@var{m} 0 @dots{}) + (match_operand:@var{m} 1 @dots{}))) +@end smallexample + +@cindex @code{tst@var{m}} instruction pattern +@item @samp{tst@var{m}} +Compare operand 0 against zero, and set the condition codes. +The RTL pattern should look like this: + +@smallexample +(set (cc0) (match_operand:@var{m} 0 @dots{})) +@end smallexample + +@samp{tst@var{m}} patterns should not be defined for machines that do +not use @code{(cc0)}. Doing so would confuse the optimizer since it +would no longer be clear which @code{set} operations were comparisons. +The @samp{cmp@var{m}} patterns should be used instead. + +@cindex @code{movstr@var{m}} instruction pattern +@item @samp{movstr@var{m}} +Block move instruction. The addresses of the destination and source +strings are the first two operands, and both are in mode @code{Pmode}. + +The number of bytes to move is the third operand, in mode @var{m}. +Usually, you specify @code{word_mode} for @var{m}. However, if you can +generate better code knowing the range of valid lengths is smaller than +those representable in a full word, you should provide a pattern with a +mode corresponding to the range of values you can handle efficiently +(e.g., @code{QImode} for values in the range 0--127; note we avoid numbers +that appear negative) and also a pattern with @code{word_mode}. + +The fourth operand is the known shared alignment of the source and +destination, in the form of a @code{const_int} rtx. Thus, if the +compiler knows that both source and destination are word-aligned, +it may provide the value 4 for this operand. + +Descriptions of multiple @code{movstr@var{m}} patterns can only be +beneficial if the patterns for smaller modes have fewer restrictions +on their first, second and fourth operands. Note that the mode @var{m} +in @code{movstr@var{m}} does not impose any restriction on the mode of +individually moved data units in the block. + +These patterns need not give special consideration to the possibility +that the source and destination strings might overlap. + +@cindex @code{clrstr@var{m}} instruction pattern +@item @samp{clrstr@var{m}} +Block clear instruction. The addresses of the destination string is the +first operand, in mode @code{Pmode}. The number of bytes to clear is +the second operand, in mode @var{m}. See @samp{movstr@var{m}} for +a discussion of the choice of mode. + +The third operand is the known alignment of the destination, in the form +of a @code{const_int} rtx. Thus, if the compiler knows that the +destination is word-aligned, it may provide the value 4 for this +operand. + +The use for multiple @code{clrstr@var{m}} is as for @code{movstr@var{m}}. + +@cindex @code{cmpstr@var{m}} instruction pattern +@item @samp{cmpstr@var{m}} +Block compare instruction, with five operands. Operand 0 is the output; +it has mode @var{m}. The remaining four operands are like the operands +of @samp{movstr@var{m}}. The two memory blocks specified are compared +byte by byte in lexicographic order. The effect of the instruction is +to store a value in operand 0 whose sign indicates the result of the +comparison. + +@cindex @code{strlen@var{m}} instruction pattern +@item @samp{strlen@var{m}} +Compute the length of a string, with three operands. +Operand 0 is the result (of mode @var{m}), operand 1 is +a @code{mem} referring to the first character of the string, +operand 2 is the character to search for (normally zero), +and operand 3 is a constant describing the known alignment +of the beginning of the string. + +@cindex @code{float@var{mn}2} instruction pattern +@item @samp{float@var{m}@var{n}2} +Convert signed integer operand 1 (valid for fixed point mode @var{m}) to +floating point mode @var{n} and store in operand 0 (which has mode +@var{n}). + +@cindex @code{floatuns@var{mn}2} instruction pattern +@item @samp{floatuns@var{m}@var{n}2} +Convert unsigned integer operand 1 (valid for fixed point mode @var{m}) +to floating point mode @var{n} and store in operand 0 (which has mode +@var{n}). + +@cindex @code{fix@var{mn}2} instruction pattern +@item @samp{fix@var{m}@var{n}2} +Convert operand 1 (valid for floating point mode @var{m}) to fixed +point mode @var{n} as a signed number and store in operand 0 (which +has mode @var{n}). This instruction's result is defined only when +the value of operand 1 is an integer. + +@cindex @code{fixuns@var{mn}2} instruction pattern +@item @samp{fixuns@var{m}@var{n}2} +Convert operand 1 (valid for floating point mode @var{m}) to fixed +point mode @var{n} as an unsigned number and store in operand 0 (which +has mode @var{n}). This instruction's result is defined only when the +value of operand 1 is an integer. + +@cindex @code{ftrunc@var{m}2} instruction pattern +@item @samp{ftrunc@var{m}2} +Convert operand 1 (valid for floating point mode @var{m}) to an +integer value, still represented in floating point mode @var{m}, and +store it in operand 0 (valid for floating point mode @var{m}). + +@cindex @code{fix_trunc@var{mn}2} instruction pattern +@item @samp{fix_trunc@var{m}@var{n}2} +Like @samp{fix@var{m}@var{n}2} but works for any floating point value +of mode @var{m} by converting the value to an integer. + +@cindex @code{fixuns_trunc@var{mn}2} instruction pattern +@item @samp{fixuns_trunc@var{m}@var{n}2} +Like @samp{fixuns@var{m}@var{n}2} but works for any floating point +value of mode @var{m} by converting the value to an integer. + +@cindex @code{trunc@var{mn}2} instruction pattern +@item @samp{trunc@var{m}@var{n}2} +Truncate operand 1 (valid for mode @var{m}) to mode @var{n} and +store in operand 0 (which has mode @var{n}). Both modes must be fixed +point or both floating point. + +@cindex @code{extend@var{mn}2} instruction pattern +@item @samp{extend@var{m}@var{n}2} +Sign-extend operand 1 (valid for mode @var{m}) to mode @var{n} and +store in operand 0 (which has mode @var{n}). Both modes must be fixed +point or both floating point. + +@cindex @code{zero_extend@var{mn}2} instruction pattern +@item @samp{zero_extend@var{m}@var{n}2} +Zero-extend operand 1 (valid for mode @var{m}) to mode @var{n} and +store in operand 0 (which has mode @var{n}). Both modes must be fixed +point. + +@cindex @code{extv} instruction pattern +@item @samp{extv} +Extract a bit field from operand 1 (a register or memory operand), where +operand 2 specifies the width in bits and operand 3 the starting bit, +and store it in operand 0. Operand 0 must have mode @code{word_mode}. +Operand 1 may have mode @code{byte_mode} or @code{word_mode}; often +@code{word_mode} is allowed only for registers. Operands 2 and 3 must +be valid for @code{word_mode}. + +The RTL generation pass generates this instruction only with constants +for operands 2 and 3. + +The bit-field value is sign-extended to a full word integer +before it is stored in operand 0. + +@cindex @code{extzv} instruction pattern +@item @samp{extzv} +Like @samp{extv} except that the bit-field value is zero-extended. + +@cindex @code{insv} instruction pattern +@item @samp{insv} +Store operand 3 (which must be valid for @code{word_mode}) into a bit +field in operand 0, where operand 1 specifies the width in bits and +operand 2 the starting bit. Operand 0 may have mode @code{byte_mode} or +@code{word_mode}; often @code{word_mode} is allowed only for registers. +Operands 1 and 2 must be valid for @code{word_mode}. + +The RTL generation pass generates this instruction only with constants +for operands 1 and 2. + +@cindex @code{mov@var{mode}cc} instruction pattern +@item @samp{mov@var{mode}cc} +Conditionally move operand 2 or operand 3 into operand 0 according to the +comparison in operand 1. If the comparison is true, operand 2 is moved +into operand 0, otherwise operand 3 is moved. + +The mode of the operands being compared need not be the same as the operands +being moved. Some machines, sparc64 for example, have instructions that +conditionally move an integer value based on the floating point condition +codes and vice versa. + +If the machine does not have conditional move instructions, do not +define these patterns. + +@cindex @code{s@var{cond}} instruction pattern +@item @samp{s@var{cond}} +Store zero or nonzero in the operand according to the condition codes. +Value stored is nonzero iff the condition @var{cond} is true. +@var{cond} is the name of a comparison operation expression code, such +as @code{eq}, @code{lt} or @code{leu}. + +You specify the mode that the operand must have when you write the +@code{match_operand} expression. The compiler automatically sees +which mode you have used and supplies an operand of that mode. + +The value stored for a true condition must have 1 as its low bit, or +else must be negative. Otherwise the instruction is not suitable and +you should omit it from the machine description. You describe to the +compiler exactly which value is stored by defining the macro +@code{STORE_FLAG_VALUE} (@pxref{Misc}). If a description cannot be +found that can be used for all the @samp{s@var{cond}} patterns, you +should omit those operations from the machine description. + +These operations may fail, but should do so only in relatively +uncommon cases; if they would fail for common cases involving +integer comparisons, it is best to omit these patterns. + +If these operations are omitted, the compiler will usually generate code +that copies the constant one to the target and branches around an +assignment of zero to the target. If this code is more efficient than +the potential instructions used for the @samp{s@var{cond}} pattern +followed by those required to convert the result into a 1 or a zero in +@code{SImode}, you should omit the @samp{s@var{cond}} operations from +the machine description. + +@cindex @code{b@var{cond}} instruction pattern +@item @samp{b@var{cond}} +Conditional branch instruction. Operand 0 is a @code{label_ref} that +refers to the label to jump to. Jump if the condition codes meet +condition @var{cond}. + +Some machines do not follow the model assumed here where a comparison +instruction is followed by a conditional branch instruction. In that +case, the @samp{cmp@var{m}} (and @samp{tst@var{m}}) patterns should +simply store the operands away and generate all the required insns in a +@code{define_expand} (@pxref{Expander Definitions}) for the conditional +branch operations. All calls to expand @samp{b@var{cond}} patterns are +immediately preceded by calls to expand either a @samp{cmp@var{m}} +pattern or a @samp{tst@var{m}} pattern. + +Machines that use a pseudo register for the condition code value, or +where the mode used for the comparison depends on the condition being +tested, should also use the above mechanism. @xref{Jump Patterns}. + +The above discussion also applies to the @samp{mov@var{mode}cc} and +@samp{s@var{cond}} patterns. + +@cindex @code{call} instruction pattern +@item @samp{call} +Subroutine call instruction returning no value. Operand 0 is the +function to call; operand 1 is the number of bytes of arguments pushed +as a @code{const_int}; operand 2 is the number of registers used as +operands. + +On most machines, operand 2 is not actually stored into the RTL +pattern. It is supplied for the sake of some RISC machines which need +to put this information into the assembler code; they can put it in +the RTL instead of operand 1. + +Operand 0 should be a @code{mem} RTX whose address is the address of the +function. Note, however, that this address can be a @code{symbol_ref} +expression even if it would not be a legitimate memory address on the +target machine. If it is also not a valid argument for a call +instruction, the pattern for this operation should be a +@code{define_expand} (@pxref{Expander Definitions}) that places the +address into a register and uses that register in the call instruction. + +@cindex @code{call_value} instruction pattern +@item @samp{call_value} +Subroutine call instruction returning a value. Operand 0 is the hard +register in which the value is returned. There are three more +operands, the same as the three operands of the @samp{call} +instruction (but with numbers increased by one). + +Subroutines that return @code{BLKmode} objects use the @samp{call} +insn. + +@cindex @code{call_pop} instruction pattern +@cindex @code{call_value_pop} instruction pattern +@item @samp{call_pop}, @samp{call_value_pop} +Similar to @samp{call} and @samp{call_value}, except used if defined and +if @code{RETURN_POPS_ARGS} is non-zero. They should emit a @code{parallel} +that contains both the function call and a @code{set} to indicate the +adjustment made to the frame pointer. + +For machines where @code{RETURN_POPS_ARGS} can be non-zero, the use of these +patterns increases the number of functions for which the frame pointer +can be eliminated, if desired. + +@cindex @code{untyped_call} instruction pattern +@item @samp{untyped_call} +Subroutine call instruction returning a value of any type. Operand 0 is +the function to call; operand 1 is a memory location where the result of +calling the function is to be stored; operand 2 is a @code{parallel} +expression where each element is a @code{set} expression that indicates +the saving of a function return value into the result block. + +This instruction pattern should be defined to support +@code{__builtin_apply} on machines where special instructions are needed +to call a subroutine with arbitrary arguments or to save the value +returned. This instruction pattern is required on machines that have +multiple registers that can hold a return value (i.e. +@code{FUNCTION_VALUE_REGNO_P} is true for more than one register). + +@cindex @code{return} instruction pattern +@item @samp{return} +Subroutine return instruction. This instruction pattern name should be +defined only if a single instruction can do all the work of returning +from a function. + +Like the @samp{mov@var{m}} patterns, this pattern is also used after the +RTL generation phase. In this case it is to support machines where +multiple instructions are usually needed to return from a function, but +some class of functions only requires one instruction to implement a +return. Normally, the applicable functions are those which do not need +to save any registers or allocate stack space. + +@findex reload_completed +@findex leaf_function_p +For such machines, the condition specified in this pattern should only +be true when @code{reload_completed} is non-zero and the function's +epilogue would only be a single instruction. For machines with register +windows, the routine @code{leaf_function_p} may be used to determine if +a register window push is required. + +Machines that have conditional return instructions should define patterns +such as + +@smallexample +(define_insn "" + [(set (pc) + (if_then_else (match_operator + 0 "comparison_operator" + [(cc0) (const_int 0)]) + (return) + (pc)))] + "@var{condition}" + "@dots{}") +@end smallexample + +where @var{condition} would normally be the same condition specified on the +named @samp{return} pattern. + +@cindex @code{untyped_return} instruction pattern +@item @samp{untyped_return} +Untyped subroutine return instruction. This instruction pattern should +be defined to support @code{__builtin_return} on machines where special +instructions are needed to return a value of any type. + +Operand 0 is a memory location where the result of calling a function +with @code{__builtin_apply} is stored; operand 1 is a @code{parallel} +expression where each element is a @code{set} expression that indicates +the restoring of a function return value from the result block. + +@cindex @code{nop} instruction pattern +@item @samp{nop} +No-op instruction. This instruction pattern name should always be defined +to output a no-op in assembler code. @code{(const_int 0)} will do as an +RTL pattern. + +@cindex @code{indirect_jump} instruction pattern +@item @samp{indirect_jump} +An instruction to jump to an address which is operand zero. +This pattern name is mandatory on all machines. + +@cindex @code{casesi} instruction pattern +@item @samp{casesi} +Instruction to jump through a dispatch table, including bounds checking. +This instruction takes five operands: + +@enumerate +@item +The index to dispatch on, which has mode @code{SImode}. + +@item +The lower bound for indices in the table, an integer constant. + +@item +The total range of indices in the table---the largest index +minus the smallest one (both inclusive). + +@item +A label that precedes the table itself. + +@item +A label to jump to if the index has a value outside the bounds. +(If the machine-description macro @code{CASE_DROPS_THROUGH} is defined, +then an out-of-bounds index drops through to the code following +the jump table instead of jumping to this label. In that case, +this label is not actually used by the @samp{casesi} instruction, +but it is always provided as an operand.) +@end enumerate + +The table is a @code{addr_vec} or @code{addr_diff_vec} inside of a +@code{jump_insn}. The number of elements in the table is one plus the +difference between the upper bound and the lower bound. + +@cindex @code{tablejump} instruction pattern +@item @samp{tablejump} +Instruction to jump to a variable address. This is a low-level +capability which can be used to implement a dispatch table when there +is no @samp{casesi} pattern. + +This pattern requires two operands: the address or offset, and a label +which should immediately precede the jump table. If the macro +@code{CASE_VECTOR_PC_RELATIVE} evaluates to a nonzero value then the first +operand is an offset which counts from the address of the table; otherwise, +it is an absolute address to jump to. In either case, the first operand has +mode @code{Pmode}. + +The @samp{tablejump} insn is always the last insn before the jump +table it uses. Its assembler code normally has no need to use the +second operand, but you should incorporate it in the RTL pattern so +that the jump optimizer will not delete the table as unreachable code. + +@cindex @code{canonicalize_funcptr_for_compare} instruction pattern +@item @samp{canonicalize_funcptr_for_compare} +Canonicalize the function pointer in operand 1 and store the result +into operand 0. + +Operand 0 is always a @code{reg} and has mode @code{Pmode}; operand 1 +may be a @code{reg}, @code{mem}, @code{symbol_ref}, @code{const_int}, etc +and also has mode @code{Pmode}. + +Canonicalization of a function pointer usually involves computing +the address of the function which would be called if the function +pointer were used in an indirect call. + +Only define this pattern if function pointers on the target machine +can have different values but still call the same function when +used in an indirect call. + +@cindex @code{save_stack_block} instruction pattern +@cindex @code{save_stack_function} instruction pattern +@cindex @code{save_stack_nonlocal} instruction pattern +@cindex @code{restore_stack_block} instruction pattern +@cindex @code{restore_stack_function} instruction pattern +@cindex @code{restore_stack_nonlocal} instruction pattern +@item @samp{save_stack_block} +@itemx @samp{save_stack_function} +@itemx @samp{save_stack_nonlocal} +@itemx @samp{restore_stack_block} +@itemx @samp{restore_stack_function} +@itemx @samp{restore_stack_nonlocal} +Most machines save and restore the stack pointer by copying it to or +from an object of mode @code{Pmode}. Do not define these patterns on +such machines. + +Some machines require special handling for stack pointer saves and +restores. On those machines, define the patterns corresponding to the +non-standard cases by using a @code{define_expand} (@pxref{Expander +Definitions}) that produces the required insns. The three types of +saves and restores are: + +@enumerate +@item +@samp{save_stack_block} saves the stack pointer at the start of a block +that allocates a variable-sized object, and @samp{restore_stack_block} +restores the stack pointer when the block is exited. + +@item +@samp{save_stack_function} and @samp{restore_stack_function} do a +similar job for the outermost block of a function and are used when the +function allocates variable-sized objects or calls @code{alloca}. Only +the epilogue uses the restored stack pointer, allowing a simpler save or +restore sequence on some machines. + +@item +@samp{save_stack_nonlocal} is used in functions that contain labels +branched to by nested functions. It saves the stack pointer in such a +way that the inner function can use @samp{restore_stack_nonlocal} to +restore the stack pointer. The compiler generates code to restore the +frame and argument pointer registers, but some machines require saving +and restoring additional data such as register window information or +stack backchains. Place insns in these patterns to save and restore any +such required data. +@end enumerate + +When saving the stack pointer, operand 0 is the save area and operand 1 +is the stack pointer. The mode used to allocate the save area defaults +to @code{Pmode} but you can override that choice by defining the +@code{STACK_SAVEAREA_MODE} macro (@pxref{Storage Layout}). You must +specify an integral mode, or @code{VOIDmode} if no save area is needed +for a particular type of save (either because no save is needed or +because a machine-specific save area can be used). Operand 0 is the +stack pointer and operand 1 is the save area for restore operations. If +@samp{save_stack_block} is defined, operand 0 must not be +@code{VOIDmode} since these saves can be arbitrarily nested. + +A save area is a @code{mem} that is at a constant offset from +@code{virtual_stack_vars_rtx} when the stack pointer is saved for use by +nonlocal gotos and a @code{reg} in the other two cases. + +@cindex @code{allocate_stack} instruction pattern +@item @samp{allocate_stack} +Subtract (or add if @code{STACK_GROWS_DOWNWARD} is undefined) operand 1 from +the stack pointer to create space for dynamically allocated data. + +Store the resultant pointer to this space into operand 0. If you +are allocating space from the main stack, do this by emitting a +move insn to copy @code{virtual_stack_dynamic_rtx} to operand 0. +If you are allocating the space elsewhere, generate code to copy the +location of the space to operand 0. In the latter case, you must +ensure this space gets freed when the corresponding space on the main +stack is free. + +Do not define this pattern if all that must be done is the subtraction. +Some machines require other operations such as stack probes or +maintaining the back chain. Define this pattern to emit those +operations in addition to updating the stack pointer. + +@cindex @code{probe} instruction pattern +@item @samp{probe} +Some machines require instructions to be executed after space is +allocated from the stack, for example to generate a reference at +the bottom of the stack. + +If you need to emit instructions before the stack has been adjusted, +put them into the @samp{allocate_stack} pattern. Otherwise, define +this pattern to emit the required instructions. + +No operands are provided. + +@cindex @code{check_stack} instruction pattern +@item @samp{check_stack} +If stack checking cannot be done on your system by probing the stack with +a load or store instruction (@pxref{Stack Checking}), define this pattern +to perform the needed check and signaling an error if the stack +has overflowed. The single operand is the location in the stack furthest +from the current stack pointer that you need to validate. Normally, +on machines where this pattern is needed, you would obtain the stack +limit from a global or thread-specific variable or register. + +@cindex @code{nonlocal_goto} instruction pattern +@item @samp{nonlocal_goto} +Emit code to generate a non-local goto, e.g., a jump from one function +to a label in an outer function. This pattern has four arguments, +each representing a value to be used in the jump. The first +argument is to be loaded into the frame pointer, the second is +the address to branch to (code to dispatch to the actual label), +the third is the address of a location where the stack is saved, +and the last is the address of the label, to be placed in the +location for the incoming static chain. + +On most machines you need not define this pattern, since GNU CC will +already generate the correct code, which is to load the frame pointer +and static chain, restore the stack (using the +@samp{restore_stack_nonlocal} pattern, if defined), and jump indirectly +to the dispatcher. You need only define this pattern if this code will +not work on your machine. + +@cindex @code{nonlocal_goto_receiver} instruction pattern +@item @samp{nonlocal_goto_receiver} +This pattern, if defined, contains code needed at the target of a +nonlocal goto after the code already generated by GNU CC. You will not +normally need to define this pattern. A typical reason why you might +need this pattern is if some value, such as a pointer to a global table, +must be restored when the frame pointer is restored. Note that a nonlocal +goto only ocurrs within a unit-of-translation, so a global table pointer +that is shared by all functions of a given module need not be restored. +There are no arguments. + +@cindex @code{exception_receiver} instruction pattern +@item @samp{exception_receiver} +This pattern, if defined, contains code needed at the site of an +exception handler that isn't needed at the site of a nonlocal goto. You +will not normally need to define this pattern. A typical reason why you +might need this pattern is if some value, such as a pointer to a global +table, must be restored after control flow is branched to the handler of +an exception. There are no arguments. + +@cindex @code{builtin_setjmp_setup} instruction pattern +@item @samp{builtin_setjmp_setup} +This pattern, if defined, contains additional code needed to initialize +the @code{jmp_buf}. You will not normally need to define this pattern. +A typical reason why you might need this pattern is if some value, such +as a pointer to a global table, must be restored. Though it is +preferred that the pointer value be recalculated if possible (given the +address of a label for instance). The single argument is a pointer to +the @code{jmp_buf}. Note that the buffer is five words long and that +the first three are normally used by the generic mechanism. + +@cindex @code{builtin_setjmp_receiver} instruction pattern +@item @samp{builtin_setjmp_receiver} +This pattern, if defined, contains code needed at the site of an +builtin setjmp that isn't needed at the site of a nonlocal goto. You +will not normally need to define this pattern. A typical reason why you +might need this pattern is if some value, such as a pointer to a global +table, must be restored. It takes one argument, which is the label +to which builtin_longjmp transfered control; this pattern may be emitted +at a small offset from that label. + +@cindex @code{builtin_longjmp} instruction pattern +@item @samp{builtin_longjmp} +This pattern, if defined, performs the entire action of the longjmp. +You will not normally need to define this pattern unless you also define +@code{builtin_setjmp_setup}. The single argument is a pointer to the +@code{jmp_buf}. + +@cindex @code{eh_epilogue} instruction pattern +@item @samp{eh_epilogue} +This pattern, if defined, affects the way @code{__builtin_eh_return}, +and thence @code{__throw} are built. It is intended to allow communication +between the exception handling machinery and the normal epilogue code +for the target. + +The pattern takes three arguments. The first is the exception context +pointer. This will have already been copied to the function return +register appropriate for a pointer; normally this can be ignored. The +second argument is an offset to be added to the stack pointer. It will +have been copied to some arbitrary call-clobbered hard reg so that it +will survive until after reload to when the normal epilogue is generated. +The final argument is the address of the exception handler to which +the function should return. This will normally need to copied by the +pattern to some special register. + +This pattern must be defined if @code{RETURN_ADDR_RTX} does not yield +something that can be reliably and permanently modified, i.e. a fixed +hard register or a stack memory reference. + +@cindex @code{prologue} instruction pattern +@item @samp{prologue} +This pattern, if defined, emits RTL for entry to a function. The function +entry is resposible for setting up the stack frame, initializing the frame +pointer register, saving callee saved registers, etc. + +Using a prologue pattern is generally preferred over defining +@code{FUNCTION_PROLOGUE} to emit assembly code for the prologue. + +The @code{prologue} pattern is particularly useful for targets which perform +instruction scheduling. + +@cindex @code{epilogue} instruction pattern +@item @samp{epilogue} +This pattern, if defined, emits RTL for exit from a function. The function +exit is resposible for deallocating the stack frame, restoring callee saved +registers and emitting the return instruction. + +Using an epilogue pattern is generally preferred over defining +@code{FUNCTION_EPILOGUE} to emit assembly code for the prologue. + +The @code{epilogue} pattern is particularly useful for targets which perform +instruction scheduling or which have delay slots for their return instruction. + +@cindex @code{sibcall_epilogue} instruction pattern +@item @samp{sibcall_epilogue} +This pattern, if defined, emits RTL for exit from a function without the final +branch back to the calling function. This pattern will be emitted before any +sibling call (aka tail call) sites. + +The @code{sibcall_epilogue} pattern must not clobber any arguments used for +parameter passing or any stack slots for arguments passed to the current +function. +@end table + +@node Pattern Ordering +@section When the Order of Patterns Matters +@cindex Pattern Ordering +@cindex Ordering of Patterns + +Sometimes an insn can match more than one instruction pattern. Then the +pattern that appears first in the machine description is the one used. +Therefore, more specific patterns (patterns that will match fewer things) +and faster instructions (those that will produce better code when they +do match) should usually go first in the description. + +In some cases the effect of ordering the patterns can be used to hide +a pattern when it is not valid. For example, the 68000 has an +instruction for converting a fullword to floating point and another +for converting a byte to floating point. An instruction converting +an integer to floating point could match either one. We put the +pattern to convert the fullword first to make sure that one will +be used rather than the other. (Otherwise a large integer might +be generated as a single-byte immediate quantity, which would not work.) +Instead of using this pattern ordering it would be possible to make the +pattern for convert-a-byte smart enough to deal properly with any +constant value. + +@node Dependent Patterns +@section Interdependence of Patterns +@cindex Dependent Patterns +@cindex Interdependence of Patterns + +Every machine description must have a named pattern for each of the +conditional branch names @samp{b@var{cond}}. The recognition template +must always have the form + +@example +(set (pc) + (if_then_else (@var{cond} (cc0) (const_int 0)) + (label_ref (match_operand 0 "" "")) + (pc))) +@end example + +@noindent +In addition, every machine description must have an anonymous pattern +for each of the possible reverse-conditional branches. Their templates +look like + +@example +(set (pc) + (if_then_else (@var{cond} (cc0) (const_int 0)) + (pc) + (label_ref (match_operand 0 "" "")))) +@end example + +@noindent +They are necessary because jump optimization can turn direct-conditional +branches into reverse-conditional branches. + +It is often convenient to use the @code{match_operator} construct to +reduce the number of patterns that must be specified for branches. For +example, + +@example +(define_insn "" + [(set (pc) + (if_then_else (match_operator 0 "comparison_operator" + [(cc0) (const_int 0)]) + (pc) + (label_ref (match_operand 1 "" ""))))] + "@var{condition}" + "@dots{}") +@end example + +In some cases machines support instructions identical except for the +machine mode of one or more operands. For example, there may be +``sign-extend halfword'' and ``sign-extend byte'' instructions whose +patterns are + +@example +(set (match_operand:SI 0 @dots{}) + (extend:SI (match_operand:HI 1 @dots{}))) + +(set (match_operand:SI 0 @dots{}) + (extend:SI (match_operand:QI 1 @dots{}))) +@end example + +@noindent +Constant integers do not specify a machine mode, so an instruction to +extend a constant value could match either pattern. The pattern it +actually will match is the one that appears first in the file. For correct +results, this must be the one for the widest possible mode (@code{HImode}, +here). If the pattern matches the @code{QImode} instruction, the results +will be incorrect if the constant value does not actually fit that mode. + +Such instructions to extend constants are rarely generated because they are +optimized away, but they do occasionally happen in nonoptimized +compilations. + +If a constraint in a pattern allows a constant, the reload pass may +replace a register with a constant permitted by the constraint in some +cases. Similarly for memory references. Because of this substitution, +you should not provide separate patterns for increment and decrement +instructions. Instead, they should be generated from the same pattern +that supports register-register add insns by examining the operands and +generating the appropriate machine instruction. + +@node Jump Patterns +@section Defining Jump Instruction Patterns +@cindex jump instruction patterns +@cindex defining jump instruction patterns + +For most machines, GNU CC assumes that the machine has a condition code. +A comparison insn sets the condition code, recording the results of both +signed and unsigned comparison of the given operands. A separate branch +insn tests the condition code and branches or not according its value. +The branch insns come in distinct signed and unsigned flavors. Many +common machines, such as the Vax, the 68000 and the 32000, work this +way. + +Some machines have distinct signed and unsigned compare instructions, and +only one set of conditional branch instructions. The easiest way to handle +these machines is to treat them just like the others until the final stage +where assembly code is written. At this time, when outputting code for the +compare instruction, peek ahead at the following branch using +@code{next_cc0_user (insn)}. (The variable @code{insn} refers to the insn +being output, in the output-writing code in an instruction pattern.) If +the RTL says that is an unsigned branch, output an unsigned compare; +otherwise output a signed compare. When the branch itself is output, you +can treat signed and unsigned branches identically. + +The reason you can do this is that GNU CC always generates a pair of +consecutive RTL insns, possibly separated by @code{note} insns, one to +set the condition code and one to test it, and keeps the pair inviolate +until the end. + +To go with this technique, you must define the machine-description macro +@code{NOTICE_UPDATE_CC} to do @code{CC_STATUS_INIT}; in other words, no +compare instruction is superfluous. + +Some machines have compare-and-branch instructions and no condition code. +A similar technique works for them. When it is time to ``output'' a +compare instruction, record its operands in two static variables. When +outputting the branch-on-condition-code instruction that follows, actually +output a compare-and-branch instruction that uses the remembered operands. + +It also works to define patterns for compare-and-branch instructions. +In optimizing compilation, the pair of compare and branch instructions +will be combined according to these patterns. But this does not happen +if optimization is not requested. So you must use one of the solutions +above in addition to any special patterns you define. + +In many RISC machines, most instructions do not affect the condition +code and there may not even be a separate condition code register. On +these machines, the restriction that the definition and use of the +condition code be adjacent insns is not necessary and can prevent +important optimizations. For example, on the IBM RS/6000, there is a +delay for taken branches unless the condition code register is set three +instructions earlier than the conditional branch. The instruction +scheduler cannot perform this optimization if it is not permitted to +separate the definition and use of the condition code register. + +On these machines, do not use @code{(cc0)}, but instead use a register +to represent the condition code. If there is a specific condition code +register in the machine, use a hard register. If the condition code or +comparison result can be placed in any general register, or if there are +multiple condition registers, use a pseudo register. + +@findex prev_cc0_setter +@findex next_cc0_user +On some machines, the type of branch instruction generated may depend on +the way the condition code was produced; for example, on the 68k and +Sparc, setting the condition code directly from an add or subtract +instruction does not clear the overflow bit the way that a test +instruction does, so a different branch instruction must be used for +some conditional branches. For machines that use @code{(cc0)}, the set +and use of the condition code must be adjacent (separated only by +@code{note} insns) allowing flags in @code{cc_status} to be used. +(@xref{Condition Code}.) Also, the comparison and branch insns can be +located from each other by using the functions @code{prev_cc0_setter} +and @code{next_cc0_user}. + +However, this is not true on machines that do not use @code{(cc0)}. On +those machines, no assumptions can be made about the adjacency of the +compare and branch insns and the above methods cannot be used. Instead, +we use the machine mode of the condition code register to record +different formats of the condition code register. + +Registers used to store the condition code value should have a mode that +is in class @code{MODE_CC}. Normally, it will be @code{CCmode}. If +additional modes are required (as for the add example mentioned above in +the Sparc), define the macro @code{EXTRA_CC_MODES} to list the +additional modes required (@pxref{Condition Code}). Also define +@code{EXTRA_CC_NAMES} to list the names of those modes and +@code{SELECT_CC_MODE} to choose a mode given an operand of a compare. + +If it is known during RTL generation that a different mode will be +required (for example, if the machine has separate compare instructions +for signed and unsigned quantities, like most IBM processors), they can +be specified at that time. + +If the cases that require different modes would be made by instruction +combination, the macro @code{SELECT_CC_MODE} determines which machine +mode should be used for the comparison result. The patterns should be +written using that mode. To support the case of the add on the Sparc +discussed above, we have the pattern + +@smallexample +(define_insn "" + [(set (reg:CC_NOOV 0) + (compare:CC_NOOV + (plus:SI (match_operand:SI 0 "register_operand" "%r") + (match_operand:SI 1 "arith_operand" "rI")) + (const_int 0)))] + "" + "@dots{}") +@end smallexample + +The @code{SELECT_CC_MODE} macro on the Sparc returns @code{CC_NOOVmode} +for comparisons whose argument is a @code{plus}. + +@node Insn Canonicalizations +@section Canonicalization of Instructions +@cindex canonicalization of instructions +@cindex insn canonicalization + +There are often cases where multiple RTL expressions could represent an +operation performed by a single machine instruction. This situation is +most commonly encountered with logical, branch, and multiply-accumulate +instructions. In such cases, the compiler attempts to convert these +multiple RTL expressions into a single canonical form to reduce the +number of insn patterns required. + +In addition to algebraic simplifications, following canonicalizations +are performed: + +@itemize @bullet +@item +For commutative and comparison operators, a constant is always made the +second operand. If a machine only supports a constant as the second +operand, only patterns that match a constant in the second operand need +be supplied. + +@cindex @code{neg}, canonicalization of +@cindex @code{not}, canonicalization of +@cindex @code{mult}, canonicalization of +@cindex @code{plus}, canonicalization of +@cindex @code{minus}, canonicalization of +For these operators, if only one operand is a @code{neg}, @code{not}, +@code{mult}, @code{plus}, or @code{minus} expression, it will be the +first operand. + +@cindex @code{compare}, canonicalization of +@item +For the @code{compare} operator, a constant is always the second operand +on machines where @code{cc0} is used (@pxref{Jump Patterns}). On other +machines, there are rare cases where the compiler might want to construct +a @code{compare} with a constant as the first operand. However, these +cases are not common enough for it to be worthwhile to provide a pattern +matching a constant as the first operand unless the machine actually has +such an instruction. + +An operand of @code{neg}, @code{not}, @code{mult}, @code{plus}, or +@code{minus} is made the first operand under the same conditions as +above. + +@item +@code{(minus @var{x} (const_int @var{n}))} is converted to +@code{(plus @var{x} (const_int @var{-n}))}. + +@item +Within address computations (i.e., inside @code{mem}), a left shift is +converted into the appropriate multiplication by a power of two. + +@cindex @code{ior}, canonicalization of +@cindex @code{and}, canonicalization of +@cindex De Morgan's law +@item +De`Morgan's Law is used to move bitwise negation inside a bitwise +logical-and or logical-or operation. If this results in only one +operand being a @code{not} expression, it will be the first one. + +A machine that has an instruction that performs a bitwise logical-and of one +operand with the bitwise negation of the other should specify the pattern +for that instruction as + +@example +(define_insn "" + [(set (match_operand:@var{m} 0 @dots{}) + (and:@var{m} (not:@var{m} (match_operand:@var{m} 1 @dots{})) + (match_operand:@var{m} 2 @dots{})))] + "@dots{}" + "@dots{}") +@end example + +@noindent +Similarly, a pattern for a ``NAND'' instruction should be written + +@example +(define_insn "" + [(set (match_operand:@var{m} 0 @dots{}) + (ior:@var{m} (not:@var{m} (match_operand:@var{m} 1 @dots{})) + (not:@var{m} (match_operand:@var{m} 2 @dots{}))))] + "@dots{}" + "@dots{}") +@end example + +In both cases, it is not necessary to include patterns for the many +logically equivalent RTL expressions. + +@cindex @code{xor}, canonicalization of +@item +The only possible RTL expressions involving both bitwise exclusive-or +and bitwise negation are @code{(xor:@var{m} @var{x} @var{y})} +and @code{(not:@var{m} (xor:@var{m} @var{x} @var{y}))}.@refill + +@item +The sum of three items, one of which is a constant, will only appear in +the form + +@example +(plus:@var{m} (plus:@var{m} @var{x} @var{y}) @var{constant}) +@end example + +@item +On machines that do not use @code{cc0}, +@code{(compare @var{x} (const_int 0))} will be converted to +@var{x}.@refill + +@cindex @code{zero_extract}, canonicalization of +@cindex @code{sign_extract}, canonicalization of +@item +Equality comparisons of a group of bits (usually a single bit) with zero +will be written using @code{zero_extract} rather than the equivalent +@code{and} or @code{sign_extract} operations. + +@end itemize + +@node Peephole Definitions +@section Machine-Specific Peephole Optimizers +@cindex peephole optimizer definitions +@cindex defining peephole optimizers + +In addition to instruction patterns the @file{md} file may contain +definitions of machine-specific peephole optimizations. + +The combiner does not notice certain peephole optimizations when the data +flow in the program does not suggest that it should try them. For example, +sometimes two consecutive insns related in purpose can be combined even +though the second one does not appear to use a register computed in the +first one. A machine-specific peephole optimizer can detect such +opportunities. + +@need 1000 +A definition looks like this: + +@smallexample +(define_peephole + [@var{insn-pattern-1} + @var{insn-pattern-2} + @dots{}] + "@var{condition}" + "@var{template}" + "@var{optional insn-attributes}") +@end smallexample + +@noindent +The last string operand may be omitted if you are not using any +machine-specific information in this machine description. If present, +it must obey the same rules as in a @code{define_insn}. + +In this skeleton, @var{insn-pattern-1} and so on are patterns to match +consecutive insns. The optimization applies to a sequence of insns when +@var{insn-pattern-1} matches the first one, @var{insn-pattern-2} matches +the next, and so on.@refill + +Each of the insns matched by a peephole must also match a +@code{define_insn}. Peepholes are checked only at the last stage just +before code generation, and only optionally. Therefore, any insn which +would match a peephole but no @code{define_insn} will cause a crash in code +generation in an unoptimized compilation, or at various optimization +stages. + +The operands of the insns are matched with @code{match_operands}, +@code{match_operator}, and @code{match_dup}, as usual. What is not +usual is that the operand numbers apply to all the insn patterns in the +definition. So, you can check for identical operands in two insns by +using @code{match_operand} in one insn and @code{match_dup} in the +other. + +The operand constraints used in @code{match_operand} patterns do not have +any direct effect on the applicability of the peephole, but they will +be validated afterward, so make sure your constraints are general enough +to apply whenever the peephole matches. If the peephole matches +but the constraints are not satisfied, the compiler will crash. + +It is safe to omit constraints in all the operands of the peephole; or +you can write constraints which serve as a double-check on the criteria +previously tested. + +Once a sequence of insns matches the patterns, the @var{condition} is +checked. This is a C expression which makes the final decision whether to +perform the optimization (we do so if the expression is nonzero). If +@var{condition} is omitted (in other words, the string is empty) then the +optimization is applied to every sequence of insns that matches the +patterns. + +The defined peephole optimizations are applied after register allocation +is complete. Therefore, the peephole definition can check which +operands have ended up in which kinds of registers, just by looking at +the operands. + +@findex prev_active_insn +The way to refer to the operands in @var{condition} is to write +@code{operands[@var{i}]} for operand number @var{i} (as matched by +@code{(match_operand @var{i} @dots{})}). Use the variable @code{insn} +to refer to the last of the insns being matched; use +@code{prev_active_insn} to find the preceding insns. + +@findex dead_or_set_p +When optimizing computations with intermediate results, you can use +@var{condition} to match only when the intermediate results are not used +elsewhere. Use the C expression @code{dead_or_set_p (@var{insn}, +@var{op})}, where @var{insn} is the insn in which you expect the value +to be used for the last time (from the value of @code{insn}, together +with use of @code{prev_nonnote_insn}), and @var{op} is the intermediate +value (from @code{operands[@var{i}]}).@refill + +Applying the optimization means replacing the sequence of insns with one +new insn. The @var{template} controls ultimate output of assembler code +for this combined insn. It works exactly like the template of a +@code{define_insn}. Operand numbers in this template are the same ones +used in matching the original sequence of insns. + +The result of a defined peephole optimizer does not need to match any of +the insn patterns in the machine description; it does not even have an +opportunity to match them. The peephole optimizer definition itself serves +as the insn pattern to control how the insn is output. + +Defined peephole optimizers are run as assembler code is being output, +so the insns they produce are never combined or rearranged in any way. + +Here is an example, taken from the 68000 machine description: + +@smallexample +(define_peephole + [(set (reg:SI 15) (plus:SI (reg:SI 15) (const_int 4))) + (set (match_operand:DF 0 "register_operand" "=f") + (match_operand:DF 1 "register_operand" "ad"))] + "FP_REG_P (operands[0]) && ! FP_REG_P (operands[1])" + "* +@{ + rtx xoperands[2]; + xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1); +#ifdef MOTOROLA + output_asm_insn (\"move.l %1,(sp)\", xoperands); + output_asm_insn (\"move.l %1,-(sp)\", operands); + return \"fmove.d (sp)+,%0\"; +#else + output_asm_insn (\"movel %1,sp@@\", xoperands); + output_asm_insn (\"movel %1,sp@@-\", operands); + return \"fmoved sp@@+,%0\"; +#endif +@} +") +@end smallexample + +@need 1000 +The effect of this optimization is to change + +@smallexample +@group +jbsr _foobar +addql #4,sp +movel d1,sp@@- +movel d0,sp@@- +fmoved sp@@+,fp0 +@end group +@end smallexample + +@noindent +into + +@smallexample +@group +jbsr _foobar +movel d1,sp@@ +movel d0,sp@@- +fmoved sp@@+,fp0 +@end group +@end smallexample + +@ignore +@findex CC_REVERSED +If a peephole matches a sequence including one or more jump insns, you must +take account of the flags such as @code{CC_REVERSED} which specify that the +condition codes are represented in an unusual manner. The compiler +automatically alters any ordinary conditional jumps which occur in such +situations, but the compiler cannot alter jumps which have been replaced by +peephole optimizations. So it is up to you to alter the assembler code +that the peephole produces. Supply C code to write the assembler output, +and in this C code check the condition code status flags and change the +assembler code as appropriate. +@end ignore + +@var{insn-pattern-1} and so on look @emph{almost} like the second +operand of @code{define_insn}. There is one important difference: the +second operand of @code{define_insn} consists of one or more RTX's +enclosed in square brackets. Usually, there is only one: then the same +action can be written as an element of a @code{define_peephole}. But +when there are multiple actions in a @code{define_insn}, they are +implicitly enclosed in a @code{parallel}. Then you must explicitly +write the @code{parallel}, and the square brackets within it, in the +@code{define_peephole}. Thus, if an insn pattern looks like this, + +@smallexample +(define_insn "divmodsi4" + [(set (match_operand:SI 0 "general_operand" "=d") + (div:SI (match_operand:SI 1 "general_operand" "0") + (match_operand:SI 2 "general_operand" "dmsK"))) + (set (match_operand:SI 3 "general_operand" "=d") + (mod:SI (match_dup 1) (match_dup 2)))] + "TARGET_68020" + "divsl%.l %2,%3:%0") +@end smallexample + +@noindent +then the way to mention this insn in a peephole is as follows: + +@smallexample +(define_peephole + [@dots{} + (parallel + [(set (match_operand:SI 0 "general_operand" "=d") + (div:SI (match_operand:SI 1 "general_operand" "0") + (match_operand:SI 2 "general_operand" "dmsK"))) + (set (match_operand:SI 3 "general_operand" "=d") + (mod:SI (match_dup 1) (match_dup 2)))]) + @dots{}] + @dots{}) +@end smallexample + +@node Expander Definitions +@section Defining RTL Sequences for Code Generation +@cindex expander definitions +@cindex code generation RTL sequences +@cindex defining RTL sequences for code generation + +On some target machines, some standard pattern names for RTL generation +cannot be handled with single insn, but a sequence of RTL insns can +represent them. For these target machines, you can write a +@code{define_expand} to specify how to generate the sequence of RTL. + +@findex define_expand +A @code{define_expand} is an RTL expression that looks almost like a +@code{define_insn}; but, unlike the latter, a @code{define_expand} is used +only for RTL generation and it can produce more than one RTL insn. + +A @code{define_expand} RTX has four operands: + +@itemize @bullet +@item +The name. Each @code{define_expand} must have a name, since the only +use for it is to refer to it by name. + +@findex define_peephole +@item +The RTL template. This is just like the RTL template for a +@code{define_peephole} in that it is a vector of RTL expressions +each being one insn. + +@item +The condition, a string containing a C expression. This expression is +used to express how the availability of this pattern depends on +subclasses of target machine, selected by command-line options when GNU +CC is run. This is just like the condition of a @code{define_insn} that +has a standard name. Therefore, the condition (if present) may not +depend on the data in the insn being matched, but only the +target-machine-type flags. The compiler needs to test these conditions +during initialization in order to learn exactly which named instructions +are available in a particular run. + +@item +The preparation statements, a string containing zero or more C +statements which are to be executed before RTL code is generated from +the RTL template. + +Usually these statements prepare temporary registers for use as +internal operands in the RTL template, but they can also generate RTL +insns directly by calling routines such as @code{emit_insn}, etc. +Any such insns precede the ones that come from the RTL template. +@end itemize + +Every RTL insn emitted by a @code{define_expand} must match some +@code{define_insn} in the machine description. Otherwise, the compiler +will crash when trying to generate code for the insn or trying to optimize +it. + +The RTL template, in addition to controlling generation of RTL insns, +also describes the operands that need to be specified when this pattern +is used. In particular, it gives a predicate for each operand. + +A true operand, which needs to be specified in order to generate RTL from +the pattern, should be described with a @code{match_operand} in its first +occurrence in the RTL template. This enters information on the operand's +predicate into the tables that record such things. GNU CC uses the +information to preload the operand into a register if that is required for +valid RTL code. If the operand is referred to more than once, subsequent +references should use @code{match_dup}. + +The RTL template may also refer to internal ``operands'' which are +temporary registers or labels used only within the sequence made by the +@code{define_expand}. Internal operands are substituted into the RTL +template with @code{match_dup}, never with @code{match_operand}. The +values of the internal operands are not passed in as arguments by the +compiler when it requests use of this pattern. Instead, they are computed +within the pattern, in the preparation statements. These statements +compute the values and store them into the appropriate elements of +@code{operands} so that @code{match_dup} can find them. + +There are two special macros defined for use in the preparation statements: +@code{DONE} and @code{FAIL}. Use them with a following semicolon, +as a statement. + +@table @code + +@findex DONE +@item DONE +Use the @code{DONE} macro to end RTL generation for the pattern. The +only RTL insns resulting from the pattern on this occasion will be +those already emitted by explicit calls to @code{emit_insn} within the +preparation statements; the RTL template will not be generated. + +@findex FAIL +@item FAIL +Make the pattern fail on this occasion. When a pattern fails, it means +that the pattern was not truly available. The calling routines in the +compiler will try other strategies for code generation using other patterns. + +Failure is currently supported only for binary (addition, multiplication, +shifting, etc.) and bitfield (@code{extv}, @code{extzv}, and @code{insv}) +operations. +@end table + +Here is an example, the definition of left-shift for the SPUR chip: + +@smallexample +@group +(define_expand "ashlsi3" + [(set (match_operand:SI 0 "register_operand" "") + (ashift:SI +@end group +@group + (match_operand:SI 1 "register_operand" "") + (match_operand:SI 2 "nonmemory_operand" "")))] + "" + " +@end group +@end smallexample + +@smallexample +@group +@{ + if (GET_CODE (operands[2]) != CONST_INT + || (unsigned) INTVAL (operands[2]) > 3) + FAIL; +@}") +@end group +@end smallexample + +@noindent +This example uses @code{define_expand} so that it can generate an RTL insn +for shifting when the shift-count is in the supported range of 0 to 3 but +fail in other cases where machine insns aren't available. When it fails, +the compiler tries another strategy using different patterns (such as, a +library call). + +If the compiler were able to handle nontrivial condition-strings in +patterns with names, then it would be possible to use a +@code{define_insn} in that case. Here is another case (zero-extension +on the 68000) which makes more use of the power of @code{define_expand}: + +@smallexample +(define_expand "zero_extendhisi2" + [(set (match_operand:SI 0 "general_operand" "") + (const_int 0)) + (set (strict_low_part + (subreg:HI + (match_dup 0) + 0)) + (match_operand:HI 1 "general_operand" ""))] + "" + "operands[1] = make_safe_from (operands[1], operands[0]);") +@end smallexample + +@noindent +@findex make_safe_from +Here two RTL insns are generated, one to clear the entire output operand +and the other to copy the input operand into its low half. This sequence +is incorrect if the input operand refers to [the old value of] the output +operand, so the preparation statement makes sure this isn't so. The +function @code{make_safe_from} copies the @code{operands[1]} into a +temporary register if it refers to @code{operands[0]}. It does this +by emitting another RTL insn. + +Finally, a third example shows the use of an internal operand. +Zero-extension on the SPUR chip is done by @code{and}-ing the result +against a halfword mask. But this mask cannot be represented by a +@code{const_int} because the constant value is too large to be legitimate +on this machine. So it must be copied into a register with +@code{force_reg} and then the register used in the @code{and}. + +@smallexample +(define_expand "zero_extendhisi2" + [(set (match_operand:SI 0 "register_operand" "") + (and:SI (subreg:SI + (match_operand:HI 1 "register_operand" "") + 0) + (match_dup 2)))] + "" + "operands[2] + = force_reg (SImode, GEN_INT (65535)); ") +@end smallexample + +@strong{Note:} If the @code{define_expand} is used to serve a +standard binary or unary arithmetic operation or a bitfield operation, +then the last insn it generates must not be a @code{code_label}, +@code{barrier} or @code{note}. It must be an @code{insn}, +@code{jump_insn} or @code{call_insn}. If you don't need a real insn +at the end, emit an insn to copy the result of the operation into +itself. Such an insn will generate no code, but it can avoid problems +in the compiler.@refill + +@node Insn Splitting +@section Defining How to Split Instructions +@cindex insn splitting +@cindex instruction splitting +@cindex splitting instructions + +There are two cases where you should specify how to split a pattern into +multiple insns. On machines that have instructions requiring delay +slots (@pxref{Delay Slots}) or that have instructions whose output is +not available for multiple cycles (@pxref{Function Units}), the compiler +phases that optimize these cases need to be able to move insns into +one-instruction delay slots. However, some insns may generate more than one +machine instruction. These insns cannot be placed into a delay slot. + +Often you can rewrite the single insn as a list of individual insns, +each corresponding to one machine instruction. The disadvantage of +doing so is that it will cause the compilation to be slower and require +more space. If the resulting insns are too complex, it may also +suppress some optimizations. The compiler splits the insn if there is a +reason to believe that it might improve instruction or delay slot +scheduling. + +The insn combiner phase also splits putative insns. If three insns are +merged into one insn with a complex expression that cannot be matched by +some @code{define_insn} pattern, the combiner phase attempts to split +the complex pattern into two insns that are recognized. Usually it can +break the complex pattern into two patterns by splitting out some +subexpression. However, in some other cases, such as performing an +addition of a large constant in two insns on a RISC machine, the way to +split the addition into two insns is machine-dependent. + +@cindex define_split +The @code{define_split} definition tells the compiler how to split a +complex insn into several simpler insns. It looks like this: + +@smallexample +(define_split + [@var{insn-pattern}] + "@var{condition}" + [@var{new-insn-pattern-1} + @var{new-insn-pattern-2} + @dots{}] + "@var{preparation statements}") +@end smallexample + +@var{insn-pattern} is a pattern that needs to be split and +@var{condition} is the final condition to be tested, as in a +@code{define_insn}. When an insn matching @var{insn-pattern} and +satisfying @var{condition} is found, it is replaced in the insn list +with the insns given by @var{new-insn-pattern-1}, +@var{new-insn-pattern-2}, etc. + +The @var{preparation statements} are similar to those statements that +are specified for @code{define_expand} (@pxref{Expander Definitions}) +and are executed before the new RTL is generated to prepare for the +generated code or emit some insns whose pattern is not fixed. Unlike +those in @code{define_expand}, however, these statements must not +generate any new pseudo-registers. Once reload has completed, they also +must not allocate any space in the stack frame. + +Patterns are matched against @var{insn-pattern} in two different +circumstances. If an insn needs to be split for delay slot scheduling +or insn scheduling, the insn is already known to be valid, which means +that it must have been matched by some @code{define_insn} and, if +@code{reload_completed} is non-zero, is known to satisfy the constraints +of that @code{define_insn}. In that case, the new insn patterns must +also be insns that are matched by some @code{define_insn} and, if +@code{reload_completed} is non-zero, must also satisfy the constraints +of those definitions. + +As an example of this usage of @code{define_split}, consider the following +example from @file{a29k.md}, which splits a @code{sign_extend} from +@code{HImode} to @code{SImode} into a pair of shift insns: + +@smallexample +(define_split + [(set (match_operand:SI 0 "gen_reg_operand" "") + (sign_extend:SI (match_operand:HI 1 "gen_reg_operand" "")))] + "" + [(set (match_dup 0) + (ashift:SI (match_dup 1) + (const_int 16))) + (set (match_dup 0) + (ashiftrt:SI (match_dup 0) + (const_int 16)))] + " +@{ operands[1] = gen_lowpart (SImode, operands[1]); @}") +@end smallexample + +When the combiner phase tries to split an insn pattern, it is always the +case that the pattern is @emph{not} matched by any @code{define_insn}. +The combiner pass first tries to split a single @code{set} expression +and then the same @code{set} expression inside a @code{parallel}, but +followed by a @code{clobber} of a pseudo-reg to use as a scratch +register. In these cases, the combiner expects exactly two new insn +patterns to be generated. It will verify that these patterns match some +@code{define_insn} definitions, so you need not do this test in the +@code{define_split} (of course, there is no point in writing a +@code{define_split} that will never produce insns that match). + +Here is an example of this use of @code{define_split}, taken from +@file{rs6000.md}: + +@smallexample +(define_split + [(set (match_operand:SI 0 "gen_reg_operand" "") + (plus:SI (match_operand:SI 1 "gen_reg_operand" "") + (match_operand:SI 2 "non_add_cint_operand" "")))] + "" + [(set (match_dup 0) (plus:SI (match_dup 1) (match_dup 3))) + (set (match_dup 0) (plus:SI (match_dup 0) (match_dup 4)))] +" +@{ + int low = INTVAL (operands[2]) & 0xffff; + int high = (unsigned) INTVAL (operands[2]) >> 16; + + if (low & 0x8000) + high++, low |= 0xffff0000; + + operands[3] = GEN_INT (high << 16); + operands[4] = GEN_INT (low); +@}") +@end smallexample + +Here the predicate @code{non_add_cint_operand} matches any +@code{const_int} that is @emph{not} a valid operand of a single add +insn. The add with the smaller displacement is written so that it +can be substituted into the address of a subsequent operation. + +An example that uses a scratch register, from the same file, generates +an equality comparison of a register and a large constant: + +@smallexample +(define_split + [(set (match_operand:CC 0 "cc_reg_operand" "") + (compare:CC (match_operand:SI 1 "gen_reg_operand" "") + (match_operand:SI 2 "non_short_cint_operand" ""))) + (clobber (match_operand:SI 3 "gen_reg_operand" ""))] + "find_single_use (operands[0], insn, 0) + && (GET_CODE (*find_single_use (operands[0], insn, 0)) == EQ + || GET_CODE (*find_single_use (operands[0], insn, 0)) == NE)" + [(set (match_dup 3) (xor:SI (match_dup 1) (match_dup 4))) + (set (match_dup 0) (compare:CC (match_dup 3) (match_dup 5)))] + " +@{ + /* Get the constant we are comparing against, C, and see what it + looks like sign-extended to 16 bits. Then see what constant + could be XOR'ed with C to get the sign-extended value. */ + + int c = INTVAL (operands[2]); + int sextc = (c << 16) >> 16; + int xorv = c ^ sextc; + + operands[4] = GEN_INT (xorv); + operands[5] = GEN_INT (sextc); +@}") +@end smallexample + +To avoid confusion, don't write a single @code{define_split} that +accepts some insns that match some @code{define_insn} as well as some +insns that don't. Instead, write two separate @code{define_split} +definitions, one for the insns that are valid and one for the insns that +are not valid. + +@node Insn Attributes +@section Instruction Attributes +@cindex insn attributes +@cindex instruction attributes + +In addition to describing the instruction supported by the target machine, +the @file{md} file also defines a group of @dfn{attributes} and a set of +values for each. Every generated insn is assigned a value for each attribute. +One possible attribute would be the effect that the insn has on the machine's +condition code. This attribute can then be used by @code{NOTICE_UPDATE_CC} +to track the condition codes. + +@menu +* Defining Attributes:: Specifying attributes and their values. +* Expressions:: Valid expressions for attribute values. +* Tagging Insns:: Assigning attribute values to insns. +* Attr Example:: An example of assigning attributes. +* Insn Lengths:: Computing the length of insns. +* Constant Attributes:: Defining attributes that are constant. +* Delay Slots:: Defining delay slots required for a machine. +* Function Units:: Specifying information for insn scheduling. +@end menu + +@node Defining Attributes +@subsection Defining Attributes and their Values +@cindex defining attributes and their values +@cindex attributes, defining + +@findex define_attr +The @code{define_attr} expression is used to define each attribute required +by the target machine. It looks like: + +@smallexample +(define_attr @var{name} @var{list-of-values} @var{default}) +@end smallexample + +@var{name} is a string specifying the name of the attribute being defined. + +@var{list-of-values} is either a string that specifies a comma-separated +list of values that can be assigned to the attribute, or a null string to +indicate that the attribute takes numeric values. + +@var{default} is an attribute expression that gives the value of this +attribute for insns that match patterns whose definition does not include +an explicit value for this attribute. @xref{Attr Example}, for more +information on the handling of defaults. @xref{Constant Attributes}, +for information on attributes that do not depend on any particular insn. + +@findex insn-attr.h +For each defined attribute, a number of definitions are written to the +@file{insn-attr.h} file. For cases where an explicit set of values is +specified for an attribute, the following are defined: + +@itemize @bullet +@item +A @samp{#define} is written for the symbol @samp{HAVE_ATTR_@var{name}}. + +@item +An enumeral class is defined for @samp{attr_@var{name}} with +elements of the form @samp{@var{upper-name}_@var{upper-value}} where +the attribute name and value are first converted to upper case. + +@item +A function @samp{get_attr_@var{name}} is defined that is passed an insn and +returns the attribute value for that insn. +@end itemize + +For example, if the following is present in the @file{md} file: + +@smallexample +(define_attr "type" "branch,fp,load,store,arith" @dots{}) +@end smallexample + +@noindent +the following lines will be written to the file @file{insn-attr.h}. + +@smallexample +#define HAVE_ATTR_type +enum attr_type @{TYPE_BRANCH, TYPE_FP, TYPE_LOAD, + TYPE_STORE, TYPE_ARITH@}; +extern enum attr_type get_attr_type (); +@end smallexample + +If the attribute takes numeric values, no @code{enum} type will be +defined and the function to obtain the attribute's value will return +@code{int}. + +@node Expressions +@subsection Attribute Expressions +@cindex attribute expressions + +RTL expressions used to define attributes use the codes described above +plus a few specific to attribute definitions, to be discussed below. +Attribute value expressions must have one of the following forms: + +@table @code +@cindex @code{const_int} and attributes +@item (const_int @var{i}) +The integer @var{i} specifies the value of a numeric attribute. @var{i} +must be non-negative. + +The value of a numeric attribute can be specified either with a +@code{const_int}, or as an integer represented as a string in +@code{const_string}, @code{eq_attr} (see below), @code{attr}, +@code{symbol_ref}, simple arithmetic expressions, and @code{set_attr} +overrides on specific instructions (@pxref{Tagging Insns}). + +@cindex @code{const_string} and attributes +@item (const_string @var{value}) +The string @var{value} specifies a constant attribute value. +If @var{value} is specified as @samp{"*"}, it means that the default value of +the attribute is to be used for the insn containing this expression. +@samp{"*"} obviously cannot be used in the @var{default} expression +of a @code{define_attr}.@refill + +If the attribute whose value is being specified is numeric, @var{value} +must be a string containing a non-negative integer (normally +@code{const_int} would be used in this case). Otherwise, it must +contain one of the valid values for the attribute. + +@cindex @code{if_then_else} and attributes +@item (if_then_else @var{test} @var{true-value} @var{false-value}) +@var{test} specifies an attribute test, whose format is defined below. +The value of this expression is @var{true-value} if @var{test} is true, +otherwise it is @var{false-value}. + +@cindex @code{cond} and attributes +@item (cond [@var{test1} @var{value1} @dots{}] @var{default}) +The first operand of this expression is a vector containing an even +number of expressions and consisting of pairs of @var{test} and @var{value} +expressions. The value of the @code{cond} expression is that of the +@var{value} corresponding to the first true @var{test} expression. If +none of the @var{test} expressions are true, the value of the @code{cond} +expression is that of the @var{default} expression. +@end table + +@var{test} expressions can have one of the following forms: + +@table @code +@cindex @code{const_int} and attribute tests +@item (const_int @var{i}) +This test is true if @var{i} is non-zero and false otherwise. + +@cindex @code{not} and attributes +@cindex @code{ior} and attributes +@cindex @code{and} and attributes +@item (not @var{test}) +@itemx (ior @var{test1} @var{test2}) +@itemx (and @var{test1} @var{test2}) +These tests are true if the indicated logical function is true. + +@cindex @code{match_operand} and attributes +@item (match_operand:@var{m} @var{n} @var{pred} @var{constraints}) +This test is true if operand @var{n} of the insn whose attribute value +is being determined has mode @var{m} (this part of the test is ignored +if @var{m} is @code{VOIDmode}) and the function specified by the string +@var{pred} returns a non-zero value when passed operand @var{n} and mode +@var{m} (this part of the test is ignored if @var{pred} is the null +string). + +The @var{constraints} operand is ignored and should be the null string. + +@cindex @code{le} and attributes +@cindex @code{leu} and attributes +@cindex @code{lt} and attributes +@cindex @code{gt} and attributes +@cindex @code{gtu} and attributes +@cindex @code{ge} and attributes +@cindex @code{geu} and attributes +@cindex @code{ne} and attributes +@cindex @code{eq} and attributes +@cindex @code{plus} and attributes +@cindex @code{minus} and attributes +@cindex @code{mult} and attributes +@cindex @code{div} and attributes +@cindex @code{mod} and attributes +@cindex @code{abs} and attributes +@cindex @code{neg} and attributes +@cindex @code{ashift} and attributes +@cindex @code{lshiftrt} and attributes +@cindex @code{ashiftrt} and attributes +@item (le @var{arith1} @var{arith2}) +@itemx (leu @var{arith1} @var{arith2}) +@itemx (lt @var{arith1} @var{arith2}) +@itemx (ltu @var{arith1} @var{arith2}) +@itemx (gt @var{arith1} @var{arith2}) +@itemx (gtu @var{arith1} @var{arith2}) +@itemx (ge @var{arith1} @var{arith2}) +@itemx (geu @var{arith1} @var{arith2}) +@itemx (ne @var{arith1} @var{arith2}) +@itemx (eq @var{arith1} @var{arith2}) +These tests are true if the indicated comparison of the two arithmetic +expressions is true. Arithmetic expressions are formed with +@code{plus}, @code{minus}, @code{mult}, @code{div}, @code{mod}, +@code{abs}, @code{neg}, @code{and}, @code{ior}, @code{xor}, @code{not}, +@code{ashift}, @code{lshiftrt}, and @code{ashiftrt} expressions.@refill + +@findex get_attr +@code{const_int} and @code{symbol_ref} are always valid terms (@pxref{Insn +Lengths},for additional forms). @code{symbol_ref} is a string +denoting a C expression that yields an @code{int} when evaluated by the +@samp{get_attr_@dots{}} routine. It should normally be a global +variable.@refill + +@findex eq_attr +@item (eq_attr @var{name} @var{value}) +@var{name} is a string specifying the name of an attribute. + +@var{value} is a string that is either a valid value for attribute +@var{name}, a comma-separated list of values, or @samp{!} followed by a +value or list. If @var{value} does not begin with a @samp{!}, this +test is true if the value of the @var{name} attribute of the current +insn is in the list specified by @var{value}. If @var{value} begins +with a @samp{!}, this test is true if the attribute's value is +@emph{not} in the specified list. + +For example, + +@smallexample +(eq_attr "type" "load,store") +@end smallexample + +@noindent +is equivalent to + +@smallexample +(ior (eq_attr "type" "load") (eq_attr "type" "store")) +@end smallexample + +If @var{name} specifies an attribute of @samp{alternative}, it refers to the +value of the compiler variable @code{which_alternative} +(@pxref{Output Statement}) and the values must be small integers. For +example,@refill + +@smallexample +(eq_attr "alternative" "2,3") +@end smallexample + +@noindent +is equivalent to + +@smallexample +(ior (eq (symbol_ref "which_alternative") (const_int 2)) + (eq (symbol_ref "which_alternative") (const_int 3))) +@end smallexample + +Note that, for most attributes, an @code{eq_attr} test is simplified in cases +where the value of the attribute being tested is known for all insns matching +a particular pattern. This is by far the most common case.@refill + +@findex attr_flag +@item (attr_flag @var{name}) +The value of an @code{attr_flag} expression is true if the flag +specified by @var{name} is true for the @code{insn} currently being +scheduled. + +@var{name} is a string specifying one of a fixed set of flags to test. +Test the flags @code{forward} and @code{backward} to determine the +direction of a conditional branch. Test the flags @code{very_likely}, +@code{likely}, @code{very_unlikely}, and @code{unlikely} to determine +if a conditional branch is expected to be taken. + +If the @code{very_likely} flag is true, then the @code{likely} flag is also +true. Likewise for the @code{very_unlikely} and @code{unlikely} flags. + +This example describes a conditional branch delay slot which +can be nullified for forward branches that are taken (annul-true) or +for backward branches which are not taken (annul-false). + +@smallexample +(define_delay (eq_attr "type" "cbranch") + [(eq_attr "in_branch_delay" "true") + (and (eq_attr "in_branch_delay" "true") + (attr_flag "forward")) + (and (eq_attr "in_branch_delay" "true") + (attr_flag "backward"))]) +@end smallexample + +The @code{forward} and @code{backward} flags are false if the current +@code{insn} being scheduled is not a conditional branch. + +The @code{very_likely} and @code{likely} flags are true if the +@code{insn} being scheduled is not a conditional branch. +The @code{very_unlikely} and @code{unlikely} flags are false if the +@code{insn} being scheduled is not a conditional branch. + +@code{attr_flag} is only used during delay slot scheduling and has no +meaning to other passes of the compiler. + +@findex attr +@item (attr @var{name}) +The value of another attribute is returned. This is most useful +for numeric attributes, as @code{eq_attr} and @code{attr_flag} +produce more efficient code for non-numeric attributes. +@end table + +@node Tagging Insns +@subsection Assigning Attribute Values to Insns +@cindex tagging insns +@cindex assigning attribute values to insns + +The value assigned to an attribute of an insn is primarily determined by +which pattern is matched by that insn (or which @code{define_peephole} +generated it). Every @code{define_insn} and @code{define_peephole} can +have an optional last argument to specify the values of attributes for +matching insns. The value of any attribute not specified in a particular +insn is set to the default value for that attribute, as specified in its +@code{define_attr}. Extensive use of default values for attributes +permits the specification of the values for only one or two attributes +in the definition of most insn patterns, as seen in the example in the +next section.@refill + +The optional last argument of @code{define_insn} and +@code{define_peephole} is a vector of expressions, each of which defines +the value for a single attribute. The most general way of assigning an +attribute's value is to use a @code{set} expression whose first operand is an +@code{attr} expression giving the name of the attribute being set. The +second operand of the @code{set} is an attribute expression +(@pxref{Expressions}) giving the value of the attribute.@refill + +When the attribute value depends on the @samp{alternative} attribute +(i.e., which is the applicable alternative in the constraint of the +insn), the @code{set_attr_alternative} expression can be used. It +allows the specification of a vector of attribute expressions, one for +each alternative. + +@findex set_attr +When the generality of arbitrary attribute expressions is not required, +the simpler @code{set_attr} expression can be used, which allows +specifying a string giving either a single attribute value or a list +of attribute values, one for each alternative. + +The form of each of the above specifications is shown below. In each case, +@var{name} is a string specifying the attribute to be set. + +@table @code +@item (set_attr @var{name} @var{value-string}) +@var{value-string} is either a string giving the desired attribute value, +or a string containing a comma-separated list giving the values for +succeeding alternatives. The number of elements must match the number +of alternatives in the constraint of the insn pattern. + +Note that it may be useful to specify @samp{*} for some alternative, in +which case the attribute will assume its default value for insns matching +that alternative. + +@findex set_attr_alternative +@item (set_attr_alternative @var{name} [@var{value1} @var{value2} @dots{}]) +Depending on the alternative of the insn, the value will be one of the +specified values. This is a shorthand for using a @code{cond} with +tests on the @samp{alternative} attribute. + +@findex attr +@item (set (attr @var{name}) @var{value}) +The first operand of this @code{set} must be the special RTL expression +@code{attr}, whose sole operand is a string giving the name of the +attribute being set. @var{value} is the value of the attribute. +@end table + +The following shows three different ways of representing the same +attribute value specification: + +@smallexample +(set_attr "type" "load,store,arith") + +(set_attr_alternative "type" + [(const_string "load") (const_string "store") + (const_string "arith")]) + +(set (attr "type") + (cond [(eq_attr "alternative" "1") (const_string "load") + (eq_attr "alternative" "2") (const_string "store")] + (const_string "arith"))) +@end smallexample + +@need 1000 +@findex define_asm_attributes +The @code{define_asm_attributes} expression provides a mechanism to +specify the attributes assigned to insns produced from an @code{asm} +statement. It has the form: + +@smallexample +(define_asm_attributes [@var{attr-sets}]) +@end smallexample + +@noindent +where @var{attr-sets} is specified the same as for both the +@code{define_insn} and the @code{define_peephole} expressions. + +These values will typically be the ``worst case'' attribute values. For +example, they might indicate that the condition code will be clobbered. + +A specification for a @code{length} attribute is handled specially. The +way to compute the length of an @code{asm} insn is to multiply the +length specified in the expression @code{define_asm_attributes} by the +number of machine instructions specified in the @code{asm} statement, +determined by counting the number of semicolons and newlines in the +string. Therefore, the value of the @code{length} attribute specified +in a @code{define_asm_attributes} should be the maximum possible length +of a single machine instruction. + +@node Attr Example +@subsection Example of Attribute Specifications +@cindex attribute specifications example +@cindex attribute specifications + +The judicious use of defaulting is important in the efficient use of +insn attributes. Typically, insns are divided into @dfn{types} and an +attribute, customarily called @code{type}, is used to represent this +value. This attribute is normally used only to define the default value +for other attributes. An example will clarify this usage. + +Assume we have a RISC machine with a condition code and in which only +full-word operations are performed in registers. Let us assume that we +can divide all insns into loads, stores, (integer) arithmetic +operations, floating point operations, and branches. + +Here we will concern ourselves with determining the effect of an insn on +the condition code and will limit ourselves to the following possible +effects: The condition code can be set unpredictably (clobbered), not +be changed, be set to agree with the results of the operation, or only +changed if the item previously set into the condition code has been +modified. + +Here is part of a sample @file{md} file for such a machine: + +@smallexample +(define_attr "type" "load,store,arith,fp,branch" (const_string "arith")) + +(define_attr "cc" "clobber,unchanged,set,change0" + (cond [(eq_attr "type" "load") + (const_string "change0") + (eq_attr "type" "store,branch") + (const_string "unchanged") + (eq_attr "type" "arith") + (if_then_else (match_operand:SI 0 "" "") + (const_string "set") + (const_string "clobber"))] + (const_string "clobber"))) + +(define_insn "" + [(set (match_operand:SI 0 "general_operand" "=r,r,m") + (match_operand:SI 1 "general_operand" "r,m,r"))] + "" + "@@ + move %0,%1 + load %0,%1 + store %0,%1" + [(set_attr "type" "arith,load,store")]) +@end smallexample + +Note that we assume in the above example that arithmetic operations +performed on quantities smaller than a machine word clobber the condition +code since they will set the condition code to a value corresponding to the +full-word result. + +@node Insn Lengths +@subsection Computing the Length of an Insn +@cindex insn lengths, computing +@cindex computing the length of an insn + +For many machines, multiple types of branch instructions are provided, each +for different length branch displacements. In most cases, the assembler +will choose the correct instruction to use. However, when the assembler +cannot do so, GCC can when a special attribute, the @samp{length} +attribute, is defined. This attribute must be defined to have numeric +values by specifying a null string in its @code{define_attr}. + +In the case of the @samp{length} attribute, two additional forms of +arithmetic terms are allowed in test expressions: + +@table @code +@cindex @code{match_dup} and attributes +@item (match_dup @var{n}) +This refers to the address of operand @var{n} of the current insn, which +must be a @code{label_ref}. + +@cindex @code{pc} and attributes +@item (pc) +This refers to the address of the @emph{current} insn. It might have +been more consistent with other usage to make this the address of the +@emph{next} insn but this would be confusing because the length of the +current insn is to be computed. +@end table + +@cindex @code{addr_vec}, length of +@cindex @code{addr_diff_vec}, length of +For normal insns, the length will be determined by value of the +@samp{length} attribute. In the case of @code{addr_vec} and +@code{addr_diff_vec} insn patterns, the length is computed as +the number of vectors multiplied by the size of each vector. + +Lengths are measured in addressable storage units (bytes). + +The following macros can be used to refine the length computation: + +@table @code +@findex FIRST_INSN_ADDRESS +@item FIRST_INSN_ADDRESS +When the @code{length} insn attribute is used, this macro specifies the +value to be assigned to the address of the first insn in a function. If +not specified, 0 is used. + +@findex ADJUST_INSN_LENGTH +@item ADJUST_INSN_LENGTH (@var{insn}, @var{length}) +If defined, modifies the length assigned to instruction @var{insn} as a +function of the context in which it is used. @var{length} is an lvalue +that contains the initially computed length of the insn and should be +updated with the correct length of the insn. + +This macro will normally not be required. A case in which it is +required is the ROMP. On this machine, the size of an @code{addr_vec} +insn must be increased by two to compensate for the fact that alignment +may be required. +@end table + +@findex get_attr_length +The routine that returns @code{get_attr_length} (the value of the +@code{length} attribute) can be used by the output routine to +determine the form of the branch instruction to be written, as the +example below illustrates. + +As an example of the specification of variable-length branches, consider +the IBM 360. If we adopt the convention that a register will be set to +the starting address of a function, we can jump to labels within 4k of +the start using a four-byte instruction. Otherwise, we need a six-byte +sequence to load the address from memory and then branch to it. + +On such a machine, a pattern for a branch instruction might be specified +as follows: + +@smallexample +(define_insn "jump" + [(set (pc) + (label_ref (match_operand 0 "" "")))] + "" + "* +@{ + return (get_attr_length (insn) == 4 + ? \"b %l0\" : \"l r15,=a(%l0); br r15\"); +@}" + [(set (attr "length") (if_then_else (lt (match_dup 0) (const_int 4096)) + (const_int 4) + (const_int 6)))]) +@end smallexample + +@node Constant Attributes +@subsection Constant Attributes +@cindex constant attributes + +A special form of @code{define_attr}, where the expression for the +default value is a @code{const} expression, indicates an attribute that +is constant for a given run of the compiler. Constant attributes may be +used to specify which variety of processor is used. For example, + +@smallexample +(define_attr "cpu" "m88100,m88110,m88000" + (const + (cond [(symbol_ref "TARGET_88100") (const_string "m88100") + (symbol_ref "TARGET_88110") (const_string "m88110")] + (const_string "m88000")))) + +(define_attr "memory" "fast,slow" + (const + (if_then_else (symbol_ref "TARGET_FAST_MEM") + (const_string "fast") + (const_string "slow")))) +@end smallexample + +The routine generated for constant attributes has no parameters as it +does not depend on any particular insn. RTL expressions used to define +the value of a constant attribute may use the @code{symbol_ref} form, +but may not use either the @code{match_operand} form or @code{eq_attr} +forms involving insn attributes. + +@node Delay Slots +@subsection Delay Slot Scheduling +@cindex delay slots, defining + +The insn attribute mechanism can be used to specify the requirements for +delay slots, if any, on a target machine. An instruction is said to +require a @dfn{delay slot} if some instructions that are physically +after the instruction are executed as if they were located before it. +Classic examples are branch and call instructions, which often execute +the following instruction before the branch or call is performed. + +On some machines, conditional branch instructions can optionally +@dfn{annul} instructions in the delay slot. This means that the +instruction will not be executed for certain branch outcomes. Both +instructions that annul if the branch is true and instructions that +annul if the branch is false are supported. + +Delay slot scheduling differs from instruction scheduling in that +determining whether an instruction needs a delay slot is dependent only +on the type of instruction being generated, not on data flow between the +instructions. See the next section for a discussion of data-dependent +instruction scheduling. + +@findex define_delay +The requirement of an insn needing one or more delay slots is indicated +via the @code{define_delay} expression. It has the following form: + +@smallexample +(define_delay @var{test} + [@var{delay-1} @var{annul-true-1} @var{annul-false-1} + @var{delay-2} @var{annul-true-2} @var{annul-false-2} + @dots{}]) +@end smallexample + +@var{test} is an attribute test that indicates whether this +@code{define_delay} applies to a particular insn. If so, the number of +required delay slots is determined by the length of the vector specified +as the second argument. An insn placed in delay slot @var{n} must +satisfy attribute test @var{delay-n}. @var{annul-true-n} is an +attribute test that specifies which insns may be annulled if the branch +is true. Similarly, @var{annul-false-n} specifies which insns in the +delay slot may be annulled if the branch is false. If annulling is not +supported for that delay slot, @code{(nil)} should be coded.@refill + +For example, in the common case where branch and call insns require +a single delay slot, which may contain any insn other than a branch or +call, the following would be placed in the @file{md} file: + +@smallexample +(define_delay (eq_attr "type" "branch,call") + [(eq_attr "type" "!branch,call") (nil) (nil)]) +@end smallexample + +Multiple @code{define_delay} expressions may be specified. In this +case, each such expression specifies different delay slot requirements +and there must be no insn for which tests in two @code{define_delay} +expressions are both true. + +For example, if we have a machine that requires one delay slot for branches +but two for calls, no delay slot can contain a branch or call insn, +and any valid insn in the delay slot for the branch can be annulled if the +branch is true, we might represent this as follows: + +@smallexample +(define_delay (eq_attr "type" "branch") + [(eq_attr "type" "!branch,call") + (eq_attr "type" "!branch,call") + (nil)]) + +(define_delay (eq_attr "type" "call") + [(eq_attr "type" "!branch,call") (nil) (nil) + (eq_attr "type" "!branch,call") (nil) (nil)]) +@end smallexample +@c the above is *still* too long. --mew 4feb93 + +@node Function Units +@subsection Specifying Function Units +@cindex function units, for scheduling + +On most RISC machines, there are instructions whose results are not +available for a specific number of cycles. Common cases are instructions +that load data from memory. On many machines, a pipeline stall will result +if the data is referenced too soon after the load instruction. + +In addition, many newer microprocessors have multiple function units, usually +one for integer and one for floating point, and often will incur pipeline +stalls when a result that is needed is not yet ready. + +The descriptions in this section allow the specification of how much +time must elapse between the execution of an instruction and the time +when its result is used. It also allows specification of when the +execution of an instruction will delay execution of similar instructions +due to function unit conflicts. + +For the purposes of the specifications in this section, a machine is +divided into @dfn{function units}, each of which execute a specific +class of instructions in first-in-first-out order. Function units that +accept one instruction each cycle and allow a result to be used in the +succeeding instruction (usually via forwarding) need not be specified. +Classic RISC microprocessors will normally have a single function unit, +which we can call @samp{memory}. The newer ``superscalar'' processors +will often have function units for floating point operations, usually at +least a floating point adder and multiplier. + +@findex define_function_unit +Each usage of a function units by a class of insns is specified with a +@code{define_function_unit} expression, which looks like this: + +@smallexample +(define_function_unit @var{name} @var{multiplicity} @var{simultaneity} + @var{test} @var{ready-delay} @var{issue-delay} + [@var{conflict-list}]) +@end smallexample + +@var{name} is a string giving the name of the function unit. + +@var{multiplicity} is an integer specifying the number of identical +units in the processor. If more than one unit is specified, they will +be scheduled independently. Only truly independent units should be +counted; a pipelined unit should be specified as a single unit. (The +only common example of a machine that has multiple function units for a +single instruction class that are truly independent and not pipelined +are the two multiply and two increment units of the CDC 6600.) + +@var{simultaneity} specifies the maximum number of insns that can be +executing in each instance of the function unit simultaneously or zero +if the unit is pipelined and has no limit. + +All @code{define_function_unit} definitions referring to function unit +@var{name} must have the same name and values for @var{multiplicity} and +@var{simultaneity}. + +@var{test} is an attribute test that selects the insns we are describing +in this definition. Note that an insn may use more than one function +unit and a function unit may be specified in more than one +@code{define_function_unit}. + +@var{ready-delay} is an integer that specifies the number of cycles +after which the result of the instruction can be used without +introducing any stalls. + +@var{issue-delay} is an integer that specifies the number of cycles +after the instruction matching the @var{test} expression begins using +this unit until a subsequent instruction can begin. A cost of @var{N} +indicates an @var{N-1} cycle delay. A subsequent instruction may also +be delayed if an earlier instruction has a longer @var{ready-delay} +value. This blocking effect is computed using the @var{simultaneity}, +@var{ready-delay}, @var{issue-delay}, and @var{conflict-list} terms. +For a normal non-pipelined function unit, @var{simultaneity} is one, the +unit is taken to block for the @var{ready-delay} cycles of the executing +insn, and smaller values of @var{issue-delay} are ignored. + +@var{conflict-list} is an optional list giving detailed conflict costs +for this unit. If specified, it is a list of condition test expressions +to be applied to insns chosen to execute in @var{name} following the +particular insn matching @var{test} that is already executing in +@var{name}. For each insn in the list, @var{issue-delay} specifies the +conflict cost; for insns not in the list, the cost is zero. If not +specified, @var{conflict-list} defaults to all instructions that use the +function unit. + +Typical uses of this vector are where a floating point function unit can +pipeline either single- or double-precision operations, but not both, or +where a memory unit can pipeline loads, but not stores, etc. + +As an example, consider a classic RISC machine where the result of a +load instruction is not available for two cycles (a single ``delay'' +instruction is required) and where only one load instruction can be executed +simultaneously. This would be specified as: + +@smallexample +(define_function_unit "memory" 1 1 (eq_attr "type" "load") 2 0) +@end smallexample + +For the case of a floating point function unit that can pipeline either +single or double precision, but not both, the following could be specified: + +@smallexample +(define_function_unit + "fp" 1 0 (eq_attr "type" "sp_fp") 4 4 [(eq_attr "type" "dp_fp")]) +(define_function_unit + "fp" 1 0 (eq_attr "type" "dp_fp") 4 4 [(eq_attr "type" "sp_fp")]) +@end smallexample + +@strong{Note:} The scheduler attempts to avoid function unit conflicts +and uses all the specifications in the @code{define_function_unit} +expression. It has recently come to our attention that these +specifications may not allow modeling of some of the newer +``superscalar'' processors that have insns using multiple pipelined +units. These insns will cause a potential conflict for the second unit +used during their execution and there is no way of representing that +conflict. We welcome any examples of how function unit conflicts work +in such processors and suggestions for their representation. +@end ifset |