diff options
Diffstat (limited to 'gnu/usr.bin/binutils/gprof/hist.c')
| -rw-r--r-- | gnu/usr.bin/binutils/gprof/hist.c | 594 |
1 files changed, 594 insertions, 0 deletions
diff --git a/gnu/usr.bin/binutils/gprof/hist.c b/gnu/usr.bin/binutils/gprof/hist.c new file mode 100644 index 00000000000..69cc3ea004a --- /dev/null +++ b/gnu/usr.bin/binutils/gprof/hist.c @@ -0,0 +1,594 @@ +/* + * Histogram related operations. + */ +#include <stdio.h> +#include "libiberty.h" +#include "gprof.h" +#include "core.h" +#include "gmon_io.h" +#include "gmon_out.h" +#include "hist.h" +#include "symtab.h" +#include "sym_ids.h" +#include "utils.h" + +/* declarations of automatically generated functions to output blurbs: */ +extern void flat_blurb PARAMS ((FILE * fp)); + +bfd_vma s_lowpc; /* lowest address in .text */ +bfd_vma s_highpc = 0; /* highest address in .text */ +bfd_vma lowpc, highpc; /* same, but expressed in UNITs */ +int hist_num_bins = 0; /* number of histogram samples */ +int *hist_sample = 0; /* histogram samples (shorts in the file!) */ +double hist_scale; +char hist_dimension[sizeof (((struct gmon_hist_hdr *) 0)->dimen) + 1] = + "seconds"; +char hist_dimension_abbrev = 's'; + +static double accum_time; /* accumulated time so far for print_line() */ +static double total_time; /* total time for all routines */ +/* + * Table of SI prefixes for powers of 10 (used to automatically + * scale some of the values in the flat profile). + */ +const struct + { + char prefix; + double scale; + } +SItab[] = +{ + { + 'T', 1e-12 + } + , /* tera */ + { + 'G', 1e-09 + } + , /* giga */ + { + 'M', 1e-06 + } + , /* mega */ + { + 'K', 1e-03 + } + , /* kilo */ + { + ' ', 1e-00 + } + , + { + 'm', 1e+03 + } + , /* milli */ + { + 'u', 1e+06 + } + , /* micro */ + { + 'n', 1e+09 + } + , /* nano */ + { + 'p', 1e+12 + } + , /* pico */ + { + 'f', 1e+15 + } + , /* femto */ + { + 'a', 1e+18 + } + , /* ato */ +}; + +/* + * Read the histogram from file IFP. FILENAME is the name of IFP and + * is provided for formatting error messages only. + */ +void +DEFUN (hist_read_rec, (ifp, filename), FILE * ifp AND const char *filename) +{ + struct gmon_hist_hdr hdr; + bfd_vma n_lowpc, n_highpc; + int i, ncnt, profrate; + UNIT count; + + if (fread (&hdr, sizeof (hdr), 1, ifp) != 1) + { + fprintf (stderr, "%s: %s: unexpected end of file\n", + whoami, filename); + done (1); + } + + n_lowpc = (bfd_vma) get_vma (core_bfd, (bfd_byte *) hdr.low_pc); + n_highpc = (bfd_vma) get_vma (core_bfd, (bfd_byte *) hdr.high_pc); + ncnt = bfd_get_32 (core_bfd, (bfd_byte *) hdr.hist_size); + profrate = bfd_get_32 (core_bfd, (bfd_byte *) hdr.prof_rate); + strncpy (hist_dimension, hdr.dimen, sizeof (hdr.dimen)); + hist_dimension[sizeof (hdr.dimen)] = '\0'; + hist_dimension_abbrev = hdr.dimen_abbrev; + + if (!s_highpc) + { + + /* this is the first histogram record: */ + + s_lowpc = n_lowpc; + s_highpc = n_highpc; + lowpc = (bfd_vma) n_lowpc / sizeof (UNIT); + highpc = (bfd_vma) n_highpc / sizeof (UNIT); + hist_num_bins = ncnt; + hz = profrate; + } + + DBG (SAMPLEDEBUG, + printf ("[hist_read_rec] n_lowpc 0x%lx n_highpc 0x%lx ncnt %d\n", + n_lowpc, n_highpc, ncnt); + printf ("[hist_read_rec] s_lowpc 0x%lx s_highpc 0x%lx nsamples %d\n", + s_lowpc, s_highpc, hist_num_bins); + printf ("[hist_read_rec] lowpc 0x%lx highpc 0x%lx\n", + lowpc, highpc)); + + if (n_lowpc != s_lowpc || n_highpc != s_highpc + || ncnt != hist_num_bins || hz != profrate) + { + fprintf (stderr, "%s: `%s' is incompatible with first gmon file\n", + whoami, filename); + done (1); + } + + if (!hist_sample) + { + hist_sample = (int *) xmalloc (hist_num_bins * sizeof (hist_sample[0])); + memset (hist_sample, 0, hist_num_bins * sizeof (hist_sample[0])); + } + + for (i = 0; i < hist_num_bins; ++i) + { + if (fread (&count[0], sizeof (count), 1, ifp) != 1) + { + fprintf (stderr, + "%s: %s: unexpected EOF after reading %d of %d samples\n", + whoami, filename, i, hist_num_bins); + done (1); + } + hist_sample[i] += bfd_get_16 (core_bfd, (bfd_byte *) & count[0]); + } +} + + +/* + * Write execution histogram to file OFP. FILENAME is the name + * of OFP and is provided for formatting error-messages only. + */ +void +DEFUN (hist_write_hist, (ofp, filename), FILE * ofp AND const char *filename) +{ + struct gmon_hist_hdr hdr; + unsigned char tag; + UNIT count; + int i; + + /* write header: */ + + tag = GMON_TAG_TIME_HIST; + put_vma (core_bfd, s_lowpc, (bfd_byte *) hdr.low_pc); + put_vma (core_bfd, s_highpc, (bfd_byte *) hdr.high_pc); + bfd_put_32 (core_bfd, hist_num_bins, (bfd_byte *) hdr.hist_size); + bfd_put_32 (core_bfd, hz, (bfd_byte *) hdr.prof_rate); + strncpy (hdr.dimen, hist_dimension, sizeof (hdr.dimen)); + hdr.dimen_abbrev = hist_dimension_abbrev; + + if (fwrite (&tag, sizeof (tag), 1, ofp) != 1 + || fwrite (&hdr, sizeof (hdr), 1, ofp) != 1) + { + perror (filename); + done (1); + } + + for (i = 0; i < hist_num_bins; ++i) + { + bfd_put_16 (core_bfd, hist_sample[i], (bfd_byte *) & count[0]); + if (fwrite (&count[0], sizeof (count), 1, ofp) != 1) + { + perror (filename); + done (1); + } + } +} + + +/* + * Calculate scaled entry point addresses (to save time in + * hist_assign_samples), and, on architectures that have procedure + * entry masks at the start of a function, possibly push the scaled + * entry points over the procedure entry mask, if it turns out that + * the entry point is in one bin and the code for a routine is in the + * next bin. + */ +static void +DEFUN_VOID (scale_and_align_entries) +{ + Sym *sym; +#if OFFSET_TO_CODE > 0 + bfd_vma bin_of_entry; + bfd_vma bin_of_code; +#endif + + for (sym = symtab.base; sym < symtab.limit; sym++) + { + sym->hist.scaled_addr = sym->addr / sizeof (UNIT); +#if OFFSET_TO_CODE > 0 + bin_of_entry = (sym->hist.scaled_addr - lowpc) / hist_scale; + bin_of_code = (sym->hist.scaled_addr + UNITS_TO_CODE - lowpc) / hist_scale; + if (bin_of_entry < bin_of_code) + { + DBG (SAMPLEDEBUG, + printf ("[scale_and_align_entries] pushing 0x%lx to 0x%lx\n", + sym->hist.scaled_addr, sym->aligned_addr + UNITS_TO_CODE)); + sym->aligned_addr += UNITS_TO_CODE; + } +#endif /* OFFSET_TO_CODE > 0 */ + } +} + + +/* + * Assign samples to the symbol to which they belong. + * + * Histogram bin I covers some address range [BIN_LOWPC,BIN_HIGH_PC) + * which may overlap one more symbol address ranges. If a symbol + * overlaps with the bin's address range by O percent, then O percent + * of the bin's count is credited to that symbol. + * + * There are three cases as to where BIN_LOW_PC and BIN_HIGH_PC can be + * with respect to the symbol's address range [SYM_LOW_PC, + * SYM_HIGH_PC) as shown in the following diagram. OVERLAP computes + * the distance (in UNITs) between the arrows, the fraction of the + * sample that is to be credited to the symbol which starts at + * SYM_LOW_PC. + * + * sym_low_pc sym_high_pc + * | | + * v v + * + * +-----------------------------------------------+ + * | | + * | ->| |<- ->| |<- ->| |<- | + * | | | | | | + * +---------+ +---------+ +---------+ + * + * ^ ^ ^ ^ ^ ^ + * | | | | | | + * bin_low_pc bin_high_pc bin_low_pc bin_high_pc bin_low_pc bin_high_pc + * + * For the VAX we assert that samples will never fall in the first two + * bytes of any routine, since that is the entry mask, thus we call + * scale_and_align_entries() to adjust the entry points if the entry + * mask falls in one bin but the code for the routine doesn't start + * until the next bin. In conjunction with the alignment of routine + * addresses, this should allow us to have only one sample for every + * four bytes of text space and never have any overlap (the two end + * cases, above). + */ +void +DEFUN_VOID (hist_assign_samples) +{ + bfd_vma bin_low_pc, bin_high_pc; + bfd_vma sym_low_pc, sym_high_pc; + bfd_vma overlap, addr; + int bin_count, i, j; + double time, credit; + + /* read samples and assign to symbols: */ + hist_scale = highpc - lowpc; + hist_scale /= hist_num_bins; + scale_and_align_entries (); + + /* iterate over all sample bins: */ + + for (i = 0, j = 1; i < hist_num_bins; ++i) + { + bin_count = hist_sample[i]; + if (!bin_count) + { + continue; + } + bin_low_pc = lowpc + (bfd_vma) (hist_scale * i); + bin_high_pc = lowpc + (bfd_vma) (hist_scale * (i + 1)); + time = bin_count; + DBG (SAMPLEDEBUG, + printf ( + "[assign_samples] bin_low_pc=0x%lx, bin_high_pc=0x%lx, bin_count=%d\n", + sizeof (UNIT) * bin_low_pc, sizeof (UNIT) * bin_high_pc, + bin_count)); + total_time += time; + + /* credit all symbols that are covered by bin I: */ + + for (j = j - 1; j < symtab.len; ++j) + { + sym_low_pc = symtab.base[j].hist.scaled_addr; + sym_high_pc = symtab.base[j + 1].hist.scaled_addr; + /* + * If high end of bin is below entry address, go for next + * bin: + */ + if (bin_high_pc < sym_low_pc) + { + break; + } + /* + * If low end of bin is above high end of symbol, go for + * next symbol. + */ + if (bin_low_pc >= sym_high_pc) + { + continue; + } + overlap = + MIN (bin_high_pc, sym_high_pc) - MAX (bin_low_pc, sym_low_pc); + if (overlap > 0) + { + DBG (SAMPLEDEBUG, + printf ( + "[assign_samples] [0x%lx,0x%lx) %s gets %f ticks %ld overlap\n", + symtab.base[j].addr, sizeof (UNIT) * sym_high_pc, + symtab.base[j].name, overlap * time / hist_scale, + overlap)); + addr = symtab.base[j].addr; + credit = overlap * time / hist_scale; + /* + * Credit symbol if it appears in INCL_FLAT or that + * table is empty and it does not appear it in + * EXCL_FLAT. + */ + if (sym_lookup (&syms[INCL_FLAT], addr) + || (syms[INCL_FLAT].len == 0 + && !sym_lookup (&syms[EXCL_FLAT], addr))) + { + symtab.base[j].hist.time += credit; + } + else + { + total_time -= credit; + } + } + } + } + DBG (SAMPLEDEBUG, printf ("[assign_samples] total_time %f\n", + total_time)); +} + + +/* + * Print header for flag histogram profile: + */ +static void +DEFUN (print_header, (prefix), const char prefix) +{ + char unit[64]; + + sprintf (unit, "%c%c/call", prefix, hist_dimension_abbrev); + + if (bsd_style_output) + { + printf ("\ngranularity: each sample hit covers %ld byte(s)", + (long) hist_scale * sizeof (UNIT)); + if (total_time > 0.0) + { + printf (" for %.2f%% of %.2f %s\n\n", + 100.0 / total_time, total_time / hz, hist_dimension); + } + } + else + { + printf ("\nEach sample counts as %g %s.\n", 1.0 / hz, hist_dimension); + } + + if (total_time <= 0.0) + { + printf (" no time accumulated\n\n"); + /* this doesn't hurt since all the numerators will be zero: */ + total_time = 1.0; + } + + printf ("%5.5s %10.10s %8.8s %8.8s %8.8s %8.8s %-8.8s\n", + "% ", "cumulative", "self ", "", "self ", "total ", ""); + printf ("%5.5s %9.9s %8.8s %8.8s %8.8s %8.8s %-8.8s\n", + "time", hist_dimension, hist_dimension, "calls", unit, unit, + "name"); +} + + +static void +DEFUN (print_line, (sym, scale), Sym * sym AND double scale) +{ + if (ignore_zeros && sym->ncalls == 0 && sym->hist.time == 0) + { + return; + } + + accum_time += sym->hist.time; + if (bsd_style_output) + { + printf ("%5.1f %10.2f %8.2f", + total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0, + accum_time / hz, sym->hist.time / hz); + } + else + { + printf ("%6.2f %9.2f %8.2f", + total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0, + accum_time / hz, sym->hist.time / hz); + } + if (sym->ncalls) + { + printf (" %8d %8.2f %8.2f ", + sym->ncalls, scale * sym->hist.time / hz / sym->ncalls, + scale * (sym->hist.time + sym->cg.child_time) / hz / sym->ncalls); + } + else + { + printf (" %8.8s %8.8s %8.8s ", "", "", ""); + } + if (bsd_style_output) + { + print_name (sym); + } + else + { + print_name_only (sym); + } + printf ("\n"); +} + + +/* + * Compare LP and RP. The primary comparison key is execution time, + * the secondary is number of invocation, and the tertiary is the + * lexicographic order of the function names. + */ +static int +DEFUN (cmp_time, (lp, rp), const PTR lp AND const PTR rp) +{ + const Sym *left = *(const Sym **) lp; + const Sym *right = *(const Sym **) rp; + double time_diff; + long call_diff; + + time_diff = right->hist.time - left->hist.time; + if (time_diff > 0.0) + { + return 1; + } + if (time_diff < 0.0) + { + return -1; + } + + call_diff = right->ncalls - left->ncalls; + if (call_diff > 0) + { + return 1; + } + if (call_diff < 0) + { + return -1; + } + + return strcmp (left->name, right->name); +} + + +/* + * Print the flat histogram profile. + */ +void +DEFUN_VOID (hist_print) +{ + Sym **time_sorted_syms, *top_dog, *sym; + int index, log_scale; + double top_time, time; + bfd_vma addr; + + if (first_output) + { + first_output = FALSE; + } + else + { + printf ("\f\n"); + } + + accum_time = 0.0; + if (bsd_style_output) + { + if (print_descriptions) + { + printf ("\n\n\nflat profile:\n"); + flat_blurb (stdout); + } + } + else + { + printf ("Flat profile:\n"); + } + /* + * Sort the symbol table by time (call-count and name as secondary + * and tertiary keys): + */ + time_sorted_syms = (Sym **) xmalloc (symtab.len * sizeof (Sym *)); + for (index = 0; index < symtab.len; ++index) + { + time_sorted_syms[index] = &symtab.base[index]; + } + qsort (time_sorted_syms, symtab.len, sizeof (Sym *), cmp_time); + + if (bsd_style_output) + { + log_scale = 5; /* milli-seconds is BSD-default */ + } + else + { + /* + * Search for symbol with highest per-call execution time and + * scale accordingly: + */ + log_scale = 0; + top_dog = 0; + top_time = 0.0; + for (index = 0; index < symtab.len; ++index) + { + sym = time_sorted_syms[index]; + if (sym->ncalls) + { + time = (sym->hist.time + sym->cg.child_time) / sym->ncalls; + if (time > top_time) + { + top_dog = sym; + top_time = time; + } + } + } + if (top_dog && top_dog->ncalls && top_time > 0.0) + { + top_time /= hz; + while (SItab[log_scale].scale * top_time < 1000.0 + && log_scale < sizeof (SItab) / sizeof (SItab[0]) - 1) + { + ++log_scale; + } + } + } + + /* + * For now, the dimension is always seconds. In the future, we + * may also want to support other (pseudo-)dimensions (such as + * I-cache misses etc.). + */ + print_header (SItab[log_scale].prefix); + for (index = 0; index < symtab.len; ++index) + { + addr = time_sorted_syms[index]->addr; + /* + * Print symbol if its in INCL_FLAT table or that table + * is empty and the symbol is not in EXCL_FLAT. + */ + if (sym_lookup (&syms[INCL_FLAT], addr) + || (syms[INCL_FLAT].len == 0 + && !sym_lookup (&syms[EXCL_FLAT], addr))) + { + print_line (time_sorted_syms[index], SItab[log_scale].scale); + } + } + free (time_sorted_syms); + + if (print_descriptions && !bsd_style_output) + { + flat_blurb (stdout); + } +} |