diff options
Diffstat (limited to 'share/mk')
| -rw-r--r-- | share/mk/bsd.port.mk | 502 | ||||
| -rw-r--r-- | share/mk/bsd.port.subdir.mk | 65 |
2 files changed, 370 insertions, 197 deletions
diff --git a/share/mk/bsd.port.mk b/share/mk/bsd.port.mk index d201c1de99a..bff7637f296 100644 --- a/share/mk/bsd.port.mk +++ b/share/mk/bsd.port.mk @@ -1,23 +1,30 @@ #-*- mode: Fundamental; tab-width: 4; -*- # ex:ts=4 -# $OpenBSD: bsd.port.mk,v 1.12 1997/04/27 21:38:33 millert Exp $ +# $OpenBSD: bsd.port.mk,v 1.13 1997/09/09 15:11:28 imp Exp $ # $NetBSD: $ # # bsd.port.mk - 940820 Jordan K. Hubbard. # This file is in the public domain. # -# FreeBSD Id: bsd.port.mk,v 1.241 1996/12/25 02:27:44 imp Exp +# FreeBSD Id: bsd.port.mk,v 1.264 1996/12/25 02:27:44 imp Exp # # Please view me with 4 column tabs! -# This is for this file, not for the ports that includes it, so it's -# commented out -- the person to contact if you have questions/ -# suggestions about bsd.port.mk. -# -# MAINTAINER= asami@FreeBSD.ORG -# -# OPENBSD_MAINTAINER= imp@OpenBSD.ORG +# There are two different types of "maintainers" in the whole ports +# framework concept. Maintainers of the bsd.port*.mk files +# are listed below in the ${OSNAME}_MAINTAINER entries (this file +# is used by multiple *BSD flavors). You should consult them directly +# if you have any questions/suggestions regarding this file since only +# they are allowed to modify the master copies in the CVS repository! + +# For each port, the MAINTAINER variable is what you should consult for +# contact information on the person(s) to contact if you have questions/ +# suggestions about that specific port. By default (if no MAINTAINER +# is listed), a port is maintained by the subscribers of the ports@freebsd.org +# mailing list, and any correspondece should be directed there. # +FreeBSD_MAINTAINER= asami@FreeBSD.ORG +OpenBSD_MAINTAINER= imp@OpenBSD.ORG # Supported Variables and their behaviors: # @@ -26,12 +33,13 @@ # ONLY_FOR_ARCHS- If a port only makes sense to certain architectures, this # is a list containing the names for them. It is checked # against the predefined ${MACHINE} value +# ARCH - The architecture, as returned by "uname -m". # OPSYS - Portability clause. This is the operating system the # makefile is being used on. Automatically set to # "FreeBSD," "NetBSD," or "OpenBSD" as appropriate. # PORTSDIR - The root of the ports tree. Defaults: -# OpenBSD/FreeBSD: /usr/ports -# NetBSD: /usr/opt +# FreeBSD/OpenBSD: /usr/ports +# NetBSD: /usr/opt # DISTDIR - Where to get gzip'd, tarballed copies of original sources # (default: ${PORTSDIR}/distfiles). # PREFIX - Where to install things in general (default: /usr/local). @@ -97,8 +105,10 @@ # FORCE_PKG_REGISTER - If set, it will overwrite any existing package # registration information in ${PKG_DBDIR}/${PKGNAME}. # NO_MTREE - If set, will not invoke mtree from bsd.port.mk from -# the "install" target. This is the default if -# USE_IMAKE or USE_X11 is set. +# the "install" target. +# MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist +# if USE_IMAKE or USE_X11 is set, /etc/mtree/BSD.local.dist +# otherwise.) # # NO_BUILD - Use a dummy (do-nothing) build target. # NO_CONFIGURE - Use a dummy (do-nothing) configure target. @@ -115,16 +125,21 @@ # BROKEN - Port is broken. Set this string to the reason why. # RESTRICTED - Port is restricted. Set this string to the reason why. # USE_GMAKE - Says that the port uses gmake. +# USE_PERL5 - Says that the port uses perl5 for building and running. # USE_IMAKE - Says that the port uses imake. -# USE_X11 - Says that the port uses X11. +# USE_X11 - Says that the port uses X11 (i.e., installs in ${X11BASE}). # NO_INSTALL_MANPAGES - For imake ports that don't like the install.man # target. # HAS_CONFIGURE - Says that the port has its own configure script. # GNU_CONFIGURE - Set if you are using GNU configure (optional). # CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'. # CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set. -# CONFIGURE_ENV - Pass these env (shell-like) to configure if +# CONFIGURE_ENV - Pass these env (shell-like) to configure if # ${HAS_CONFIGURE} is set. +# SCRIPTS_ENV - Additional environment vars passed to scripts in +# ${SCRIPTDIR} executed by bsd.port.mk. +# MAKE_ENV - Additional environment vars passed to sub-make in build +# stage. # IS_INTERACTIVE - Set this if your port needs to interact with the user # during a build. User can then decide to skip this port by # setting ${BATCH}, or compiling only the interactive ports @@ -162,7 +177,7 @@ # EXTRACT_SUFX - Suffix for archive names (default: .tar.gz). # EXTRACT_BEFORE_ARGS - # Arguments to ${EXTRACT_CMD} before filename -# (default: -C ${WRKDIR} -xzf). +# (default: -xzf). # EXTRACT_AFTER_ARGS - # Arguments to ${EXTRACT_CMD} following filename # (default: none). @@ -179,23 +194,24 @@ # REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be # built only if HAVE_MOTIF is set. # HAVE_MOTIF - If set, means system has Motif. Typically set in -# /etc/mk.conf. +# /etc/make.conf (FreeBSD,NetBSD) or +# /etc/mk.conf (OpenBSD). # MOTIF_STATIC - If set, link libXm statically; otherwise, link it -# dynamically. Typically set in /etc/mk.conf. +# dynamically. Typically set in +# /etc/make.conf (FreeBSD,NetBSD) or +# /etc/mk.conf (OpenBSD). # MOTIFLIB - Set automatically to appropriate value depending on # ${MOTIF_STATIC}. Substitute references to -lXm with # patches to make your port conform to our standards. +# MOTIF_ONLY - If set, build Motif ports only. (Not much use except for +# building packages.) # # Variables to change if you want a special behavior: # # ECHO_MSG - Used to print all the '===>' style prompts - override this # to turn them off (default: /bin/echo). -# IS_DEPENDED_TARGET - -# The target to execute when a port is called as a -# dependency (default: install). E.g., "make fetch -# IS_DEPENDED_TARGET=fetch" will fetch all the distfiles, -# including those of dependencies, without actually building -# any of them). +# DEPENDS_TARGET - The target to execute when a port is calling a +# dependency (default: "install"). # PATCH_DEBUG - If set, print out more information about the patches as # it attempts to apply them. # @@ -267,6 +283,9 @@ fetch fetch-list extract patch configure build install reinstall package describ @echo "and you are running ${MACHINE}." .else +# Get the architecture +ARCH!= uname -m + # Get the operating system type OPSYS!= uname -s @@ -278,16 +297,24 @@ OPSYS!= uname -s NOMANCOMPRESS?= yes .endif +.if exists(${.CURDIR}/Makefile.${ARCH}-${OPSYS}) +.include "${.CURDIR}/Makefile.${ARCH}-${OPSYS}" +.elif exists(${.CURDIR}/Makefile.${OPSYS}) +.include "${.CURDIR}/Makefile.${OPSYS}" +.elif exists(${.CURDIR}/Makefile.${ARCH}) +.include "${.CURDIR}/Makefile.${ARCH}" +.endif + # These need to be absolute since we don't know how deep in the ports # tree we are and thus can't go relative. They can, of course, be overridden # by individual Makefiles or local system make configuration. .if (${OPSYS} == "NetBSD") -PORTSDIR?= ${DESTDIR}/usr/opt +PORTSDIR?= /usr/opt .else -PORTSDIR?= ${DESTDIR}/usr/ports +PORTSDIR?= /usr/ports .endif -LOCALBASE?= /usr/local -X11BASE?= /usr/X11R6 +LOCALBASE?= ${DESTDIR}/usr/local +X11BASE?= ${DESTDIR}/usr/X11R6 DISTDIR?= ${PORTSDIR}/distfiles _DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} PACKAGES?= ${PORTSDIR}/packages @@ -306,10 +333,47 @@ WRKSRC?= ${WRKDIR} .else WRKSRC?= ${WRKDIR}/${DISTNAME} .endif + +.if exists(${.CURDIR}/patches.${ARCH}-${OPSYS}) +PATCHDIR?= ${.CURDIR}/patches.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/patches.${OPSYS}) +PATCHDIR?= ${.CURDIR}/patches.${OPSYS} +.elif exists(${.CURDIR}/patches.${ARCH}) +PATCHDIR?= ${.CURDIR}/patches.${ARCH} +.else PATCHDIR?= ${.CURDIR}/patches +.endif + +.if exists(${.CURDIR}/scripts.${ARCH}-${OPSYS}) +SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/scripts.${OPSYS}) +SCRIPTDIR?= ${.CURDIR}/scripts.${OPSYS} +.elif exists(${.CURDIR}/scripts.${ARCH}) +SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH} +.else SCRIPTDIR?= ${.CURDIR}/scripts +.endif + +.if exists(${.CURDIR}/files.${ARCH}-${OPSYS}) +FILESDIR?= ${.CURDIR}/files.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/files.${OPSYS}) +FILESDIR?= ${.CURDIR}/files.${OPSYS} +.elif exists(${.CURDIR}/files.${ARCH}) +FILESDIR?= ${.CURDIR}/files.${ARCH} +.else FILESDIR?= ${.CURDIR}/files +.endif + +.if exists(${.CURDIR}/pkg.${ARCH}-${OPSYS}) +PKGDIR?= ${.CURDIR}/pkg.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/pkg.${OPSYS}) +PKGDIR?= ${.CURDIR}/pkg.${OPSYS} +.elif exists(${.CURDIR}/pkg.${ARCH}) +PKGDIR?= ${.CURDIR}/pkg.${ARCH} +.else PKGDIR?= ${.CURDIR}/pkg +.endif + .if defined(USE_IMAKE) || defined(USE_X11) PREFIX?= ${X11BASE} .else @@ -321,7 +385,11 @@ BUILD_DEPENDS+= ${EXEC_DEPENDS} RUN_DEPENDS+= ${EXEC_DEPENDS} .endif .if defined(USE_GMAKE) -BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake +BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake +.endif +.if defined(USE_PERL5) +BUILD_DEPENDS+= perl5.00401:${PORTSDIR}/lang/perl5 +RUN_DEPENDS+= perl5.00401:${PORTSDIR}/lang/perl5 .endif .if exists(${PORTSDIR}/../Makefile.inc) @@ -344,14 +412,14 @@ DO_NADA?= /usr/bin/true # Miscellaneous overridable commands: GMAKE?= gmake XMKMF?= xmkmf -a -.if exists(/usr/bin/md5) -MD5?= /usr/bin/md5 +.if exists(/sbin/md5) +MD5?= /sbin/md5 .elif exists(/bin/md5) MD5?= /bin/md5 -.elif exists(/usr/local/bin/md5) -MD5?= /usr/local/bin/md5 +.elif exists(/usr/bin/md5) +MD5?= /usr/bin/md5 .else -MD5?= /sbin/md5 +MD5?= md5 .endif MD5_FILE?= ${FILESDIR}/md5 @@ -359,10 +427,10 @@ MAKE_FLAGS?= -f MAKEFILE?= Makefile MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" -.if (${OPSYS} == "OpenBSD") -FETCH_CMD?= /usr/bin/ftp -.else +.if exists(/usr/bin/fetch) FETCH_CMD?= /usr/bin/fetch +.else +FETCH_CMD?= /usr/bin/ftp .endif TOUCH?= /usr/bin/touch @@ -404,14 +472,15 @@ EXTRACT_BEFORE_ARGS?= -xzf .endif # Figure out where the local mtree file is -.if !defined(MTREE_LOCAL) && exists(/etc/mtree/BSD.local.dist) -MTREE_LOCAL= /etc/mtree/BSD.local.dist +.if !defined(MTREE_FILE) +.if defined(USE_IMAKE) || defined(USE_X11) +MTREE_FILE= /etc/mtree/BSD.x11.dist +.else +MTREE_FILE= /etc/mtree/BSD.local.dist .endif -MTREE_CMD?= /usr/sbin/mtree -MTREE_ARGS?= -U -f ${MTREE_LOCAL} -d -e -p -.if defined(USE_X11) || defined(USE_IMAKE) || !defined(MTREE_LOCAL) -NO_MTREE= yes .endif +MTREE_CMD?= /usr/sbin/mtree +MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p .if (${OPSYS} == "OpenBSD") .include <bsd.own.mk> @@ -428,15 +497,26 @@ INSTALL_DATA= \ INSTALL_MAN= \ ${INSTALL} ${INSTALL_COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE} +INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ + BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ + BSD_INSTALL_DATA="${INSTALL_DATA}" \ + BSD_INSTALL_MAN="${INSTALL_MAN}" +MAKE_ENV+= ${INSTALL_MACROS} +SCRIPTS_ENV+= ${INSTALL_MACROS} + # The user can override the NO_PACKAGE by specifying this from # the make command line .if defined(FORCE_PACKAGE) .undef NO_PACKAGE .endif +COMMENT?= ${PKGDIR}/COMMENT +DESCR?= ${PKGDIR}/DESCR +PLIST?= ${PKGDIR}/PLIST + PKG_CMD?= /usr/sbin/pkg_create .if !defined(PKG_ARGS) -PKG_ARGS= -v -c ${PKGDIR}/COMMENT -d ${PKGDIR}/DESCR -f ${PKGDIR}/PLIST -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`" +PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${PLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`" .if exists(${PKGDIR}/INSTALL) PKG_ARGS+= -i ${PKGDIR}/INSTALL .endif @@ -449,8 +529,8 @@ PKG_ARGS+= -r ${PKGDIR}/REQ .if exists(${PKGDIR}/MESSAGE) PKG_ARGS+= -D ${PKGDIR}/MESSAGE .endif -.if !defined(NO_MTREE) && defined(MTREE_LOCAL) -PKG_ARGS+= -m ${MTREE_LOCAL} +.if !defined(NO_MTREE) +PKG_ARGS+= -m ${MTREE_FILE} .endif .endif PKG_SUFX?= .tgz @@ -466,22 +546,26 @@ MOTIFLIB?= -L${X11BASE}/lib -lXm .endif .endif -ECHO?= /bin/echo -CAT?= /bin/cat -CP?= /bin/cp -SETENV?= /usr/bin/env -RM?= /bin/rm -MKDIR?= /bin/mkdir -p -RMDIR?= /bin/rmdir AWK?= /usr/bin/awk BASENAME?= /usr/bin/basename +CAT?= /bin/cat +CP?= /bin/cp +ECHO?= /bin/echo FALSE?= /usr/bin/false GREP?= /usr/bin/grep +GUNZIP_CMD?= /usr/bin/gunzip -f GZCAT?= /usr/bin/gzcat GZIP?= -9 GZIP_CMD?= /usr/bin/gzip -nf ${GZIP} -GUNZIP_CMD?= /usr/bin/gunzip -f +LDCONFIG?= /sbin/ldconfig +MKDIR?= /bin/mkdir -p +MV?= /bin/mv +RM?= /bin/rm +RMDIR?= /bin/rmdir SED?= /usr/bin/sed +SETENV?= /usr/bin/env +SH?= /bin/sh +TR?= /usr/bin/tr # Used to print all the '===>' style prompts - override this to turn them off. ECHO_MSG?= ${ECHO} @@ -490,28 +574,37 @@ ALL_TARGET?= all INSTALL_TARGET?= install # Popular master sites -MASTER_SITE_XCONTRIB?= \ - ftp://ftp.x.org/contrib/${MASTER_SITE_SUBDIR}/ \ - ftp://crl.dec.com/pub/X11/contrib/${MASTER_SITE_SUBDIR}/ - -MASTER_SITE_GNU?= \ - ftp://prep.ai.mit.edu/pub/gnu/${MASTER_SITE_SUBDIR}/ \ - ftp://wuarchive.wustl.edu/systems/gnu/${MASTER_SITE_SUBDIR}/ +MASTER_SITE_XCONTRIB+= \ + ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \ + ftp://ftp.eu.net/X11/contrib/%SUBDIR%/ + +MASTER_SITE_GNU+= \ + ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \ + ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ + +MASTER_SITE_PERL_CPAN+= \ + ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \ + ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/ + +MASTER_SITE_TEX_CTAN+= \ + ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \ + ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \ + ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \ + ftp://ftp.tex.ac.uk/public/ctan/tex-archive/%SUBDIR%/ \ + ftp://ftp.dante.de/tex-archive/%SUBDIR%/ + +MASTER_SITE_SUNSITE+= \ + ftp://sunsite.unc.edu/pub/Linux/%SUBDIR%/ \ + ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \ + ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/ -MASTER_SITE_PERL_CPAN?= \ - ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/${MASTER_SITE_SUBDIR}/ \ - ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/${MASTER_SITE_SUBDIR}/ - -MASTER_SITE_TEX_CTAN?= \ - ftp://ftp.cdrom.com/pub/tex/ctan/${MASTER_SITE_SUBDIR}/ \ - ftp://wuarchive.wustl.edu/packages/TeX/${MASTER_SITE_SUBDIR}/ \ - ftp://ftp.funet.fi/pub/TeX/CTAN/${MASTER_SITE_SUBDIR}/ \ - ftp.tex.ac.uk/public/ctan/tex-archive/${MASTER_SITE_SUBDIR}/ +# Empty declaration to avoid "variable MASTER_SITES recursive" error +MASTER_SITES?= +PATCH_SITES?= -MASTER_SITE_SUNSITE?= \ - ftp://sunsite.unc.edu/pub/Linux/${MASTER_SITE_SUBDIR}/ \ - ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/${MASTER_SITE_SUBDIR}/ \ - ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/${MASTER_SITE_SUBDIR}/ +# Substitute subdirectory names +MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/} +PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/} # The primary backup site. MASTER_SITE_BACKUP?= \ @@ -522,9 +615,10 @@ MASTER_SITE_BACKUP?= \ MASTER_SITE_OVERRIDE= ${MASTER_SITE_BACKUP} .endif -# Empty declaration to avoid "variable MASTER_SITES recursive" error -MASTER_SITES?= -PATCH_SITES?= +# Where to put distfiles that don't have any other master site +MASTER_SITE_LOCAL?= \ + ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/ + # I guess we're in the master distribution business! :) As we gain mirror # sites for distfiles, add them to this list. .if !defined(MASTER_SITE_OVERRIDE) @@ -607,6 +701,17 @@ CONFIGURE_ARGS+= --prefix=${PREFIX} HAS_CONFIGURE= yes .endif +# Passed to most of script invocations +SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \ + WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ + SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ + PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \ + PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} + +.if defined(BATCH) +SCRIPTS_ENV+= BATCH=yes +.endif + MANPREFIX?= ${PREFIX} .for sect in 1 2 3 4 5 6 7 8 9 @@ -662,16 +767,21 @@ _MANPAGES:= ${_MANPAGES:S/$/.gz/} # Don't build a port if it's broken. ################################################################ +.if !defined(NO_IGNORE) .if (defined(IS_INTERACTIVE) && defined(BATCH)) IGNORE= "is an interactive port" .elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) IGNORE= "is not an interactive port" .elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF)) IGNORE= "requires Motif" +.elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF)) +IGNORE= "does not require Motif" .elif (defined(NO_CDROM) && defined(FOR_CDROM)) IGNORE= "may not be placed on a CDROM: ${NO_CDROM}" .elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) IGNORE= "is restricted: ${RESTRICTED}" +.elif ((defined(USE_IMAKE) || defined(USE_X11)) && !exists(${X11BASE})) +IGNORE= "uses X11, but ${X11BASE} not found" .elif defined(BROKEN) IGNORE= "is marked as broken: ${BROKEN}" .endif @@ -701,6 +811,7 @@ install: package: @${IGNORECMD} .endif +.endif .if defined(ALL_HOOK) all: @@ -717,12 +828,12 @@ all: all: build .endif -.if !defined(IS_DEPENDED_TARGET) -IS_DEPENDED_TARGET= install +.if !defined(DEPENDS_TARGET) +.if make(reinstall) +DEPENDS_TARGET= reinstall +.else +DEPENDS_TARGET= install .endif - -.if !target(is_depended) -is_depended: ${IS_DEPENDED_TARGET} .endif ################################################################ @@ -896,7 +1007,7 @@ do-patch: ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \ for i in ${PATCHDIR}/patch-*; do \ case $$i in \ - *.orig|*~) \ + *.orig|*.rej|*~) \ ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \ ;; \ *) \ @@ -916,11 +1027,8 @@ do-patch: .if !target(do-configure) do-configure: @if [ -f ${SCRIPTDIR}/configure ]; then \ - cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTDIR=${DISTDIR}\ - WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ - SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ - PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} DEPENDS="${DEPENDS}" \ - X11BASE=${X11BASE} /bin/sh ${SCRIPTDIR}/configure; \ + cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ + ${SCRIPTDIR}/configure; \ fi .if defined(HAS_CONFIGURE) @(cd ${WRKSRC} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \ @@ -948,11 +1056,6 @@ do-build: .if !target(do-install) do-install: - @if [ `/bin/sh -c umask` != 0022 ]; then \ - ${ECHO_MSG} "===> Warning: your umask is \"`/bin/sh -c umask`"\".; \ - ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ - ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ - fi .if defined(USE_GMAKE) @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET}) .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) @@ -970,7 +1073,7 @@ do-install: .if !target(do-package) do-package: - @if [ -e ${PKGDIR}/PLIST ]; then \ + @if [ -e ${PLIST} ]; then \ ${ECHO_MSG} "===> Building package for ${PKGNAME}"; \ if [ -d ${PACKAGES} ]; then \ if [ ! -d ${PKGREPOSITORY} ]; then \ @@ -1031,12 +1134,34 @@ _PORT_USE: .USE @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends .endif .if make(real-install) +.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) + @if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \ + ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \ + ${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \ + ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \ + ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \ + ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \ + ${ECHO_MSG} " in your environment or the \"make install\" command line."; \ + exit 1; \ + fi +.endif + @if [ `${SH} -c umask` != 0022 ]; then \ + ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \ + ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ + ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ + fi @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends .endif .if make(real-install) .if !defined(NO_MTREE) @if [ `id -u` = 0 ]; then \ - ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \ + if [ ! -f ${MTREE_FILE} ]; then \ + ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \ + ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \ + exit 1; \ + else \ + ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \ + fi; \ else \ ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \ @@ -1045,21 +1170,14 @@ _PORT_USE: .USE .endif @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/} @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \ - cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \ - WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \ - FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \ - DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \ - /bin/sh ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \ + cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ + ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \ fi @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/} @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/} @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \ - cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTDIR=${DISTDIR}\ - WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ - SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ - PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} DEPENDS="${DEPENDS}" \ - X11BASE=${X11BASE} \ - /bin/sh ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \ + cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ + ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \ fi .if make(real-install) && defined(_MANPAGES) .if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS) @@ -1180,11 +1298,9 @@ checkpatch: # Special target to re-run install .if !target(reinstall) -reinstall: pre-reinstall install - -pre-reinstall: - @${RM} -f ${INSTALL_COOKIE} - @${RM} -f ${PACKAGE_COOKIE} +reinstall: + @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} + @DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install .endif ################################################################ @@ -1225,10 +1341,12 @@ pre-distclean: .if !target(distclean) distclean: pre-distclean clean @${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}" - @(cd ${_DISTDIR}; \ - ${RM} -f ${DISTFILES} ${PATCHFILES}) + @(if [ -d ${_DISTDIR} ]; then \ + cd ${_DISTDIR}; \ + ${RM} -f ${DISTFILES} ${PATCHFILES}; \ + fi) .if defined(DIST_SUBDIR) - @${RMDIR} ${_DISTDIR} + -@${RMDIR} ${_DISTDIR} .endif .endif @@ -1284,7 +1402,7 @@ checksum: fetch (cd ${DISTDIR}; OK="true"; \ for file in ${_CKSUMFILES}; do \ CKSUM=`${MD5} < $$file`; \ - CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \ + CKSUM2=`${GREP} "^MD5 ($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \ if [ "$$CKSUM2" = "" ]; then \ ${ECHO_MSG} ">> No checksum recorded for $$file."; \ OK="false"; \ @@ -1292,9 +1410,11 @@ checksum: fetch ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ - elif [ "$$CKSUM" != "$$CKSUM2" ]; then \ + elif [ "$$CKSUM" = "$$CKSUM2" ]; then \ + ${ECHO_MSG} ">> Checksum OK for $$file."; \ + else \ ${ECHO_MSG} ">> Checksum mismatch for $$file."; \ - exit 1; \ + OK="false"; \ fi; \ done; \ for file in ${_IGNOREFILES}; do \ @@ -1308,11 +1428,11 @@ checksum: fetch OK="false"; \ fi; \ done; \ - if [ "$$OK" = "true" ]; then \ - ${ECHO_MSG} "Checksums OK."; \ - else \ - ${ECHO_MSG} "There may be some inconsistencies, make sure the Makefile and md5 file"; \ - ${ECHO_MSG} "(\"${MD5_FILE}\") are up to date."; \ + if [ "$$OK" != "true" ]; then \ + ${ECHO_MSG} "Make sure the Makefile and md5 file (${MD5_FILE})"; \ + ${ECHO_MSG} "are up to date. If you want to override this check, type"; \ + ${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \ + exit 1; \ fi) ; \ fi .endif @@ -1333,9 +1453,12 @@ package-name: .if !target(package-depends) package-depends: - @for i in ${RUN_DEPENDS} ${LIB_DEPENDS} ${DEPENDS}; do \ - dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \ - (cd $$dir ; ${MAKE} package-name package-depends); \ + @for dir in `${ECHO} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ + if [ -d $$dir ]; then \ + (cd $$dir ; ${MAKE} package-name package-depends); \ + else \ + ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \ + fi; \ done .endif @@ -1380,21 +1503,16 @@ DEPENDS_TMP+= ${RUN_DEPENDS} _DEPENDS_USE: .USE .if defined(DEPENDS_TMP) -.if defined(NO_DEPENDS) -# Just print out messages +.if !defined(NO_DEPENDS) @for i in ${DEPENDS_TMP}; do \ prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \ - dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \ - if expr "$$prog" : \\/ >/dev/null; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog ($$dir)"; \ + dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \ + if expr "$$dir" : '.*:' > /dev/null; then \ + target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ + dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog ($$dir)"; \ + target=${DEPENDS_TARGET}; \ fi; \ - done -.else - @for i in ${DEPENDS_TMP}; do \ - prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \ - dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \ if expr "$$prog" : \\/ >/dev/null; then \ if [ -e "$$prog" ]; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \ @@ -1413,11 +1531,11 @@ _DEPENDS_USE: .USE fi; \ fi; \ if [ $$notfound != 0 ]; then \ - ${ECHO_MSG} "===> Verifying build for $$prog in $$dir"; \ + ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \ if [ ! -d "$$dir" ]; then \ ${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \ else \ - (cd $$dir; ${MAKE} ${.MAKEFLAGS} is_depended) ; \ + (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ fi; \ fi; \ @@ -1433,26 +1551,25 @@ run-depends: _DEPENDS_USE lib-depends: .if defined(LIB_DEPENDS) -.if defined(NO_DEPENDS) -# Just print out messages - @for i in ${LIB_DEPENDS}; do \ - lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \ - dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \ - ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib ($$dir)"; \ - done -.else +.if !defined(NO_DEPENDS) @for i in ${LIB_DEPENDS}; do \ lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \ - dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \ + dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \ + if expr "$$dir" : '.*:' > /dev/null; then \ + target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ + dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ + else \ + target=${DEPENDS_TARGET}; \ + fi; \ if /sbin/ldconfig -r | ${GREP} -q -e "-l$$lib"; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - found"; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - not found"; \ - ${ECHO_MSG} "===> Verifying build for $$lib in $$dir"; \ + ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \ if [ ! -d "$$dir" ]; then \ ${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \ else \ - (cd $$dir; ${MAKE} ${.MAKEFLAGS} is_depended) ; \ + (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ fi; \ fi; \ @@ -1464,14 +1581,20 @@ lib-depends: misc-depends: .if defined(DEPENDS) - @${ECHO_MSG} "===> ${PKGNAME} depends on: ${DEPENDS}" .if !defined(NO_DEPENDS) - @for i in ${DEPENDS}; do \ - ${ECHO_MSG} "===> Verifying build for $$i"; \ - if [ ! -d $$i ]; then \ - ${ECHO_MSG} ">> No directory for $$i. Skipping.."; \ + @for dir in ${DEPENDS}; do \ + if expr "$$dir" : '.*:' > /dev/null; then \ + target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ + dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ + else \ + target=${DEPENDS_TARGET}; \ + fi; \ + ${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \ + ${ECHO_MSG} "===> Verifying $$target for $$dir"; \ + if [ ! -d $$dir ]; then \ + ${ECHO_MSG} ">> No directory for $$dir. Skipping.."; \ else \ - (cd $$i; ${MAKE} ${.MAKEFLAGS} is_depended) ; \ + (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ fi \ done @${ECHO_MSG} "===> Returning to build of ${PKGNAME}" @@ -1486,25 +1609,24 @@ misc-depends: clean-depends: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \ || defined(RUN_DEPENDS) - @for i in ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}; do \ - dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \ - if [ -d $$dir ] ; then (cd $$dir; ${MAKE} clean); fi \ + @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \ + if [ -d $$dir ] ; then \ + (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \ + fi \ done .endif .if defined(DEPENDS) - @for dir in ${DEPENDS}; do \ - if [ -d $$dir ] ; then (cd $$dir; ${MAKE} clean); fi \ + @for dir in `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ + if [ -d $$dir ] ; then \ + (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \ + fi \ done .endif .endif .if !target(depends-list) depends-list: - @for i in ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}; do \ - dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \ - (cd $$dir; ${MAKE} package-name depends-list); \ - done - @for dir in ${DEPENDS}; do \ + @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ (cd $$dir; ${MAKE} package-name depends-list); \ done .endif @@ -1522,23 +1644,29 @@ depends-list: # .if !target(describe) describe: - @${ECHO} -n "${PKGNAME}|${.CURDIR}|" - @${ECHO} -n "${PREFIX}|" - @if [ -f ${PKGDIR}/COMMENT ]; then \ - ${ECHO} -n "`${CAT} ${PKGDIR}/COMMENT`"; \ + @${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \ + ${ECHO} -n "${PREFIX}|"; \ + if [ -f ${COMMENT} ]; then \ + ${ECHO} -n "`${CAT} ${COMMENT}`"; \ else \ ${ECHO} -n "** No Description"; \ - fi - @if [ -f ${PKGDIR}/DESCR ]; then \ - ${ECHO} -n "|${PKGDIR}/DESCR"; \ + fi; \ + if [ -f ${DESCR} ]; then \ + ${ECHO} -n "|${DESCR}"; \ else \ ${ECHO} -n "|/dev/null"; \ - fi - @${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|" - @cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u` - @${ECHO} -n "|" - @cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u` - @${ECHO} "" + fi; \ + ${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \ + case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \ + ABCDE) ;; \ + *) cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u`;; \ + esac; \ + ${ECHO} -n "|"; \ + case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \ + ABCD) ;; \ + *) cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u`;; \ + esac; \ + ${ECHO} "" .endif .if !target(readmes) @@ -1587,7 +1715,7 @@ print-package-depends: .if !target(fake-pkg) fake-pkg: - @if [ ! -f ${PKGDIR}/PLIST -o ! -f ${PKGDIR}/COMMENT -o ! -f ${PKGDIR}/DESCR ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi + @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi .if defined(FORCE_PKG_REGISTER) @${RM} -rf ${PKG_DBDIR}/${PKGNAME} @@ -1596,8 +1724,8 @@ fake-pkg: ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \ ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \ ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ - ${CP} ${PKGDIR}/DESCR ${PKG_DBDIR}/${PKGNAME}/+DESC; \ - ${CP} ${PKGDIR}/COMMENT ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ + ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ + ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ if [ -f ${PKGDIR}/INSTALL ]; then \ ${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ fi; \ @@ -1607,10 +1735,14 @@ fake-pkg: if [ -f ${PKGDIR}/REQ ]; then \ ${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \ fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \ - ${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \ - ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \ + for dep in `make package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \ + if [ -d ${PKG_DBDIR}/$$dep ]; then \ + if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \ + >/dev/null 2>&1; then \ + ${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \ + fi; \ + fi; \ + done; \ fi .endif diff --git a/share/mk/bsd.port.subdir.mk b/share/mk/bsd.port.subdir.mk index 57ee3b8a3c3..a92c07cc2f9 100644 --- a/share/mk/bsd.port.subdir.mk +++ b/share/mk/bsd.port.subdir.mk @@ -1,5 +1,38 @@ -# $OpenBSD: bsd.port.subdir.mk,v 1.2 1996/10/22 14:01:20 niklas Exp $ -# FreeBSD Id: bsd.port.subdir.mk,v 1.14 1996/04/09 22:54:13 wosch Exp $ +# from: @(#)bsd.subdir.mk 5.9 (Berkeley) 2/1/91 +# $OpenBSD: bsd.port.subdir.mk,v 1.3 1997/09/09 15:11:29 imp Exp $ +# FreeBSD Id: bsd.port.subdir.mk,v 1.20 1997/08/22 11:16:15 asami Exp +# +# The include file <bsd.port.subdir.mk> contains the default targets +# for building ports subdirectories. +# +# +# +++ variables +++ +# +# STRIP The flag passed to the install program to cause the binary +# to be stripped. This is to be used when building your +# own install script so that the entire system can be made +# stripped/not-stripped using a single knob. [-s] +# +# ECHO_MSG Used to print all the '===>' style prompts - override this +# to turn them off [echo]. +# +# OPSYS Get the operating system type [`uname -s`] +# +# SUBDIR A list of subdirectories that should be built as well. +# Each of the targets will execute the same target in the +# subdirectories. +# +# +# +++ targets +++ +# +# README.html: +# Creating README.html for package. +# +# afterinstall, all, beforeinstall, build, checksum, clean, +# configure, depend, describe, extract, fetch, fetch-list, +# install, package, readmes, realinstall, reinstall, tags +# + .MAIN: all @@ -7,6 +40,9 @@ STRIP?= -s .endif +.if !defined(OPSYS) # XXX !! +OPSYS!= uname -s +.endif ECHO_MSG?= echo @@ -19,16 +55,17 @@ _SUBDIRUSE: .USE ${ECHO_MSG} "===> ${DIRPRFX}$${entry} skipped"; \ fi; \ done; \ + if test -d ${.CURDIR}/$${entry}.${MACHINE}; then \ + edir=$${entry}.${MACHINE}; \ + elif test -d ${.CURDIR}/$${entry}; then \ + edir=$${entry}; \ + else \ + OK="false"; \ + ${ECHO_MSG} "===> ${DIRPRFX}$${entry} non-existent"; \ + fi; \ if [ "$$OK" = "" ]; then \ - if test -d ${.CURDIR}/$${entry}.${MACHINE}; then \ - ${ECHO_MSG} "===> ${DIRPRFX}$${entry}.${MACHINE}"; \ - edir=$${entry}.${MACHINE}; \ - cd ${.CURDIR}/$${edir}; \ - else \ - ${ECHO_MSG} "===> ${DIRPRFX}$$entry"; \ - edir=$${entry}; \ - cd ${.CURDIR}/$${edir}; \ - fi; \ + ${ECHO_MSG} "===> ${DIRPRFX}$${edir}"; \ + cd ${.CURDIR}/$${edir}; \ ${MAKE} ${.TARGET:realinstall=install} \ DIRPRFX=${DIRPRFX}$$edir/; \ fi; \ @@ -43,7 +80,7 @@ ${SUBDIR}:: ${MAKE} all .for __target in all fetch fetch-list package extract configure \ - build clean depend describe reinstall tags checksum + build clean depend describe distclean reinstall tags checksum .if !target(__target) ${__target}: _SUBDIRUSE .endif @@ -71,7 +108,11 @@ readme: @make README.html .endif +.if (${OPSYS} == "NetBSD") +PORTSDIR ?= /usr/opt +.else PORTSDIR ?= /usr/ports +.endif TEMPLATES ?= ${PORTSDIR}/templates .if defined(PORTSTOP) README= ${TEMPLATES}/README.top |