summaryrefslogtreecommitdiff
path: root/share/snmp/VM-MIB.txt
diff options
context:
space:
mode:
Diffstat (limited to 'share/snmp/VM-MIB.txt')
-rw-r--r--share/snmp/VM-MIB.txt1673
1 files changed, 1673 insertions, 0 deletions
diff --git a/share/snmp/VM-MIB.txt b/share/snmp/VM-MIB.txt
new file mode 100644
index 00000000000..1c82e5ebc83
--- /dev/null
+++ b/share/snmp/VM-MIB.txt
@@ -0,0 +1,1673 @@
+VM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, TimeTicks,
+ Counter64, Integer32, mib-2
+ FROM SNMPv2-SMI
+ OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ TEXTUAL-CONVENTION, PhysAddress, TruthValue
+ FROM SNMPv2-TC
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+ UUIDorZero
+ FROM UUID-TC-MIB
+ InterfaceIndexOrZero
+ FROM IF-MIB
+
+ IANAStorageMediaType
+ FROM IANA-STORAGE-MEDIA-TYPE-MIB;
+
+vmMIB MODULE-IDENTITY
+ LAST-UPDATED "201510120000Z" -- 12 October 2015
+ ORGANIZATION "IETF Operations and Management Area Working Group"
+ CONTACT-INFO
+ "WG Email: opsawg@ietf.org
+ Mailing list subscription info:
+ https://www.ietf.org/mailman/listinfo/opsawg
+
+ Hirochika Asai
+ The University of Tokyo
+ 7-3-1 Hongo
+ Bunkyo-ku, Tokyo 113-8656
+ Japan
+ Phone: +81 3 5841 6748
+ Email: panda@hongo.wide.ad.jp
+
+ Michael MacFaden
+ VMware Inc.
+ Email: mrm@vmware.com
+
+ Juergen Schoenwaelder
+ Jacobs University
+ Campus Ring 1
+ Bremen 28759
+ Germany
+ Email: j.schoenwaelder@jacobs-university.de
+
+ Keiichi Shima
+ IIJ Innovation Institute Inc.
+ 3-13 Kanda-Nishikicho
+ Chiyoda-ku, Tokyo 101-0054
+ Japan
+ Email: keiichi@iijlab.net
+
+ Tina Tsou
+ Huawei Technologies (USA)
+ 2330 Central Expressway
+ Santa Clara, CA 95050
+ United States
+ Email: tina.tsou.zouting@huawei.com"
+ DESCRIPTION
+ "This MIB module is for use in managing a hypervisor and
+ virtual machines controlled by the hypervisor.
+
+ Copyright (c) 2015 IETF Trust and the persons identified
+ as authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with
+ or without modification, is permitted pursuant to, and
+ subject to the license terms contained in, the
+ Simplified BSD License set forth in Section 4.c of the
+ IETF Trust's Legal Provisions Relating to IETF Documents
+ (http://trustee.ietf.org/license-info)."
+
+ REVISION "201510120000Z" -- 12 October 2015
+ DESCRIPTION
+ "The initial version of this MIB, published as
+ RFC 7666."
+ ::= { mib-2 236 }
+
+vmNotifications OBJECT IDENTIFIER ::= { vmMIB 0 }
+vmObjects OBJECT IDENTIFIER ::= { vmMIB 1 }
+vmConformance OBJECT IDENTIFIER ::= { vmMIB 2 }
+
+-- Textual conversion definitions
+--
+VirtualMachineIndex ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A unique value, greater than zero, identifying a
+ virtual machine. The value for each virtual machine
+ MUST remain constant at least from one re-initialization
+ of the hypervisor to the next re-initialization."
+ SYNTAX Integer32 (1..2147483647)
+
+VirtualMachineIndexOrZero ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "This textual convention is an extension of the
+ VirtualMachineIndex convention. This extension permits
+ the additional value of zero. The meaning of the value
+ zero is object-specific and MUST therefore be defined as
+ part of the description of any object that uses this
+ syntax. Examples of the usage of zero might include
+ situations where a virtual machine is unknown, or when
+ none or all virtual machines need to be referenced."
+ SYNTAX Integer32 (0..2147483647)
+
+VirtualMachineAdminState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The administrative state of a virtual machine:
+
+ running(1) The administrative state of the virtual
+ machine indicating the virtual machine
+ is currently online or should be brought
+ online.
+
+ suspended(2) The administrative state of the virtual
+ machine where its memory and CPU execution
+ state has been saved to persistent store
+ and will be restored at next running(1).
+
+ paused(3) The administrative state indicating the
+ virtual machine is resident in memory but
+ is no longer scheduled to execute by the
+ hypervisor.
+
+ shutdown(4) The administrative state of the virtual
+ machine indicating the virtual machine
+ is currently offline or should be
+ shutting down."
+ SYNTAX INTEGER {
+ running(1),
+ suspended(2),
+ paused(3),
+ shutdown(4)
+ }
+
+VirtualMachineOperState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The operational state of a virtual machine:
+
+ unknown(1) The operational state of the virtual
+ machine is unknown, e.g., because the
+ implementation failed to obtain the state
+ from the hypervisor.
+
+ other(2) The operational state of the virtual
+ machine indicating that an operational
+ state is obtained from the hypervisor, but
+ it is not a state defined in this MIB
+ module.
+
+ preparing(3) The operational state of the virtual
+ machine indicating the virtual machine is
+
+ currently in the process of preparation,
+ e.g., allocating and initializing virtual
+ storage after creating (defining) the
+ virtual machine.
+
+ running(4) The operational state of the virtual
+ machine indicating the virtual machine is
+ currently executed, but it is not in the
+ process of preparing(3), suspending(5),
+ resuming(7), migrating(9), and
+ shuttingdown(10).
+
+ suspending(5) The operational state of the virtual
+ machine indicating the virtual machine is
+ currently in the process of suspending
+ to save its memory and CPU execution
+ state to persistent store. This is a
+ transient state from running(4) to
+ suspended(6).
+
+ suspended(6) The operational state of the virtual
+ machine indicating the virtual machine is
+ currently suspended, which means the
+ memory and CPU execution state of the
+ virtual machine are saved to persistent
+ store. During this state, the virtual
+ machine is not scheduled to execute by
+ the hypervisor.
+
+ resuming(7) The operational state of the virtual
+ machine indicating the virtual machine is
+ currently in the process of resuming
+ to restore its memory and CPU execution
+ state from persistent store. This is a
+ transient state from suspended(6) to
+ running(4).
+
+ paused(8) The operational state of the virtual
+ machine indicating the virtual machine is
+ resident in memory but no longer
+ scheduled to execute by the hypervisor.
+
+ migrating(9) The operational state of the virtual
+ machine indicating the virtual machine is
+ currently in the process of migration
+ from/to another hypervisor.
+
+ shuttingdown(10)
+
+ The operational state of the virtual
+ machine indicating the virtual machine is
+ currently in the process of shutting
+ down. This is a transient state from
+ running(4) to shutdown(11).
+
+ shutdown(11) The operational state of the virtual
+ machine indicating the virtual machine is
+ down, and CPU execution is no longer
+ scheduled by the hypervisor and its
+ memory is not resident in the hypervisor.
+
+ crashed(12) The operational state of the virtual
+ machine indicating the virtual machine
+ has crashed."
+ SYNTAX INTEGER {
+ unknown(1),
+ other(2),
+ preparing(3),
+ running(4),
+ suspending(5),
+ suspended(6),
+ resuming(7),
+ paused(8),
+ migrating(9),
+ shuttingdown(10),
+ shutdown(11),
+ crashed(12)
+ }
+
+VirtualMachineAutoStart ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The autostart configuration of a virtual machine:
+
+ unknown(1) The autostart configuration is unknown,
+ e.g., because the implementation failed
+ to obtain the autostart configuration
+ from the hypervisor.
+
+ enabled(2) The autostart configuration of the
+ virtual machine is enabled. The virtual
+ machine should be automatically brought
+ online at the next re-initialization of
+ the hypervisor.
+
+ disabled(3) The autostart configuration of the
+ virtual machine is disabled. The virtual
+
+ machine should not be automatically
+ brought online at the next
+ re-initialization of the hypervisor."
+ SYNTAX INTEGER {
+ unknown(1),
+ enabled(2),
+ disabled(3)
+ }
+
+VirtualMachinePersistent ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This value indicates whether a virtual machine has a
+ persistent configuration, which means the virtual machine
+ will still exist after shutting down:
+
+ unknown(1) The persistent configuration is unknown,
+ e.g., because the implementation failed
+ to obtain the persistent configuration
+ from the hypervisor. (read-only)
+
+ persistent(2) The virtual machine is persistent, i.e.,
+ the virtual machine will exist after it
+ shuts down.
+
+ transient(3) The virtual machine is transient, i.e.,
+ the virtual machine will not exist after
+ it shuts down."
+ SYNTAX INTEGER {
+ unknown(1),
+ persistent(2),
+ transient(3)
+ }
+
+VirtualMachineCpuIndex ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A unique value for each virtual machine, greater than
+ zero, identifying a virtual CPU assigned to a virtual
+ machine. The value for each virtual CPU MUST remain
+ constant at least from one re-initialization of the
+ hypervisor to the next re-initialization."
+ SYNTAX Integer32 (1..2147483647)
+
+VirtualMachineStorageIndex ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A unique value for each virtual machine, greater than
+ zero, identifying a virtual storage device allocated to
+ a virtual machine. The value for each virtual storage
+ device MUST remain constant at least from one
+ re-initialization of the hypervisor to the next
+ re-initialization."
+ SYNTAX Integer32 (1..2147483647)
+
+VirtualMachineStorageSourceType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The source type of a virtual storage device:
+
+ unknown(1) The source type is unknown, e.g., because
+ the implementation failed to obtain the
+ media type from the hypervisor.
+
+ other(2) The source type is other than those
+ defined in this conversion.
+
+ block(3) The source type is a block device.
+
+ raw(4) The source type is a raw-formatted file.
+
+ sparse(5) The source type is a sparse file.
+
+ network(6) The source type is a network device."
+ SYNTAX INTEGER {
+ unknown(1),
+ other(2),
+ block(3),
+ raw(4),
+ sparse(5),
+ network(6)
+ }
+
+VirtualMachineStorageAccess ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The access permission of a virtual storage:
+
+ unknown(1) The access permission of the virtual
+ storage is unknown.
+
+ readwrite(2) The virtual storage is a read-write
+ device.
+
+ readonly(3) The virtual storage is a read-only
+ device."
+ SYNTAX INTEGER {
+ unknown(1),
+ readwrite(2),
+ readonly(3)
+ }
+
+VirtualMachineNetworkIndex ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A unique value for each virtual machine, greater than
+ zero, identifying a virtual network interface allocated
+ to the virtual machine. The value for each virtual
+ network interface MUST remain constant at least from one
+ re-initialization of the hypervisor to the next
+ re-initialization."
+ SYNTAX Integer32 (1..2147483647)
+
+VirtualMachineList ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1x"
+ STATUS current
+ DESCRIPTION
+ "Each octet within this value specifies a set of eight
+ virtual machine vmIndex values, with the first octet
+ specifying virtual machine 1 through 8, the second octet
+ specifying virtual machine 9 through 16, etc. Within
+ each octet, the most significant bit represents the
+ lowest-numbered vmIndex, and the least significant bit
+ represents the highest-numbered vmIndex. Thus, each
+ virtual machine of the host is represented by a single
+ bit within the value of this object. If that bit has
+ a value of '1', then that virtual machine is included
+ in the set of virtual machines; the virtual machine is
+ not included if its bit has a value of '0'."
+ SYNTAX OCTET STRING
+
+-- The hypervisor group
+--
+-- A collection of objects common to all hypervisors.
+--
+vmHypervisor OBJECT IDENTIFIER ::= { vmObjects 1 }
+
+vmHvSoftware OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the hypervisor software. This
+ value SHOULD NOT include its version as it SHOULD be
+ included in 'vmHvVersion'."
+ ::= { vmHypervisor 1 }
+
+vmHvVersion OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of the version of the hypervisor
+ software."
+ ::= { vmHypervisor 2 }
+
+vmHvObjectID OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The vendor's authoritative identification of the
+ hypervisor software contained in the entity. This value
+ is allocated within the SMI enterprises
+ subtree (1.3.6.1.4.1). Note that this is different from
+ sysObjectID in the SNMPv2-MIB (RFC 3418) because
+ sysObjectID is not the identification of the hypervisor
+ software but the device, firmware, or management
+ operating system."
+ ::= { vmHypervisor 3 }
+
+vmHvUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time (in centiseconds) since the hypervisor was
+ last re-initialized. Note that this is different from
+ sysUpTime in the SNMPv2-MIB (RFC 3418) and hrSystemUptime
+ in the HOST-RESOURCES-MIB (RFC 2790) because sysUpTime is
+ the uptime of the network management portion of the
+ system, and hrSystemUptime is the uptime of the
+ management operating system but not the hypervisor
+ software."
+ ::= { vmHypervisor 4 }
+
+-- The virtual machine information
+--
+
+-- A collection of objects common to all virtual machines.
+--
+vmNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of virtual machines (regardless of their
+ current state) present on this hypervisor."
+ ::= { vmObjects 2 }
+
+vmTableLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of vmHvUpTime at the time of the last creation
+ or deletion of an entry in the vmTable."
+ ::= { vmObjects 3 }
+
+vmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of virtual machine entries. The number of
+ entries is given by the value of vmNumber."
+ ::= { vmObjects 4 }
+
+vmEntry OBJECT-TYPE
+ SYNTAX VmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing management information applicable
+ to a particular virtual machine."
+ INDEX { vmIndex }
+ ::= { vmTable 1 }
+
+VmEntry ::=
+ SEQUENCE {
+ vmIndex VirtualMachineIndex,
+ vmName SnmpAdminString,
+ vmUUID UUIDorZero,
+ vmOSType SnmpAdminString,
+ vmAdminState VirtualMachineAdminState,
+ vmOperState VirtualMachineOperState,
+ vmAutoStart VirtualMachineAutoStart,
+ vmPersistent VirtualMachinePersistent,
+ vmCurCpuNumber Integer32,
+ vmMinCpuNumber Integer32,
+ vmMaxCpuNumber Integer32,
+ vmMemUnit Integer32,
+ vmCurMem Integer32,
+ vmMinMem Integer32,
+ vmMaxMem Integer32,
+ vmUpTime TimeTicks,
+ vmCpuTime Counter64
+ }
+
+vmIndex OBJECT-TYPE
+ SYNTAX VirtualMachineIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value, greater than zero, identifying the
+ virtual machine. The value assigned to a given virtual
+ machine may not persist across re-initialization of the
+ hypervisor. A command generator MUST use the vmUUID to
+ identify a given virtual machine of interest."
+ ::= { vmEntry 1 }
+
+vmName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual name of the virtual machine."
+ ::= { vmEntry 2 }
+
+vmUUID OBJECT-TYPE
+ SYNTAX UUIDorZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The virtual machine's 128-bit Universally Unique
+ Identifier (UUID) or the zero-length string when a
+ UUID is not available. If set, the UUID MUST uniquely
+ identify a virtual machine from all other virtual
+ machines in an administrative domain. A zero-length
+ octet string is returned if no UUID information is
+ known."
+ ::= { vmEntry 3 }
+
+vmOSType OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description containing operating system
+ information installed on the virtual machine. This
+ value corresponds to the operating system the hypervisor
+ assumes to be running when the virtual machine is
+ started. This may differ from the actual operating
+ system in case the virtual machine boots into a
+ different operating system."
+ ::= { vmEntry 4 }
+
+vmAdminState OBJECT-TYPE
+ SYNTAX VirtualMachineAdminState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The administrative state of the virtual machine."
+ ::= { vmEntry 5 }
+
+vmOperState OBJECT-TYPE
+ SYNTAX VirtualMachineOperState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational state of the virtual machine."
+ ::= { vmEntry 6 }
+
+vmAutoStart OBJECT-TYPE
+ SYNTAX VirtualMachineAutoStart
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The autostart configuration of the virtual machine. If
+ this value is enable(2), the virtual machine
+ automatically starts at the next initialization of the
+ hypervisor."
+ ::= { vmEntry 7 }
+
+vmPersistent OBJECT-TYPE
+ SYNTAX VirtualMachinePersistent
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value indicates whether the virtual machine has a
+ persistent configuration, which means the virtual machine
+ will still exist after its shutdown."
+ ::= { vmEntry 8 }
+
+vmCurCpuNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of virtual CPUs currently assigned to the
+ virtual machine."
+ ::= { vmEntry 9 }
+
+vmMinCpuNumber OBJECT-TYPE
+ SYNTAX Integer32 (-1|0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum number of virtual CPUs that are assigned to
+ the virtual machine when it is in a power-on state. The
+ value -1 indicates that there is no hard boundary for
+ the minimum number of virtual CPUs."
+ ::= { vmEntry 10 }
+
+vmMaxCpuNumber OBJECT-TYPE
+ SYNTAX Integer32 (-1|0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of virtual CPUs that are assigned to
+ the virtual machine when it is in a power-on state. The
+ value -1 indicates that there is no limit."
+ ::= { vmEntry 11 }
+
+vmMemUnit OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The multiplication unit in bytes for vmCurMem, vmMinMem,
+ and vmMaxMem. For example, when this value is 1024, the
+ memory size unit for vmCurMem, vmMinMem, and vmMaxMem is
+ KiB."
+ ::= { vmEntry 12 }
+
+vmCurMem OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current memory size currently allocated to the
+ virtual memory module in the unit designated by
+
+ vmMemUnit."
+ ::= { vmEntry 13 }
+
+vmMinMem OBJECT-TYPE
+ SYNTAX Integer32 (-1|0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum memory size defined to the virtual machine
+ in the unit designated by vmMemUnit. The value -1
+ indicates that there is no hard boundary for the minimum
+ memory size."
+ ::= { vmEntry 14 }
+
+vmMaxMem OBJECT-TYPE
+ SYNTAX Integer32 (-1|0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum memory size defined to the virtual machine
+ in the unit designated by vmMemUnit. The value -1
+ indicates that there is no limit."
+ ::= { vmEntry 15 }
+
+vmUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time (in centiseconds) since the administrative
+ state of the virtual machine was last changed from
+ shutdown(4) to running(1)."
+ ::= { vmEntry 16 }
+
+vmCpuTime OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "microsecond"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total CPU time used in microseconds. If the number
+ of virtual CPUs is larger than 1, vmCpuTime may exceed
+ real time.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the hypervisor and
+ administrative state (vmAdminState) changes of the
+
+ virtual machine."
+ ::= { vmEntry 17 }
+
+-- The virtual CPU on each virtual machines
+vmCpuTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VmCpuEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of virtual CPUs provided by the hypervisor."
+ ::= { vmObjects 5 }
+
+vmCpuEntry OBJECT-TYPE
+ SYNTAX VmCpuEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry for one virtual processor assigned to a
+ virtual machine."
+ INDEX { vmIndex, vmCpuIndex }
+ ::= { vmCpuTable 1 }
+
+VmCpuEntry ::=
+ SEQUENCE {
+ vmCpuIndex VirtualMachineCpuIndex,
+ vmCpuCoreTime Counter64
+ }
+
+vmCpuIndex OBJECT-TYPE
+ SYNTAX VirtualMachineCpuIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value identifying a virtual CPU assigned to
+ the virtual machine."
+ ::= { vmCpuEntry 1 }
+
+vmCpuCoreTime OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "microsecond"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total CPU time used by this virtual CPU in
+ microseconds.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the hypervisor and
+
+ administrative state (vmAdminState) changes of the
+ virtual machine."
+ ::= { vmCpuEntry 2 }
+
+-- The virtual CPU affinity on each virtual machines
+
+vmCpuAffinityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VmCpuAffinityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of CPU affinity entries of a virtual CPU."
+ ::= { vmObjects 6 }
+
+vmCpuAffinityEntry OBJECT-TYPE
+ SYNTAX VmCpuAffinityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing CPU affinity associated with a
+ particular virtual machine."
+ INDEX { vmIndex, vmCpuIndex, vmCpuPhysIndex }
+ ::= { vmCpuAffinityTable 1 }
+
+VmCpuAffinityEntry ::=
+ SEQUENCE {
+ vmCpuPhysIndex Integer32,
+ vmCpuAffinity INTEGER
+ }
+
+vmCpuPhysIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A value identifying a physical CPU on the hypervisor.
+ On systems implementing the HOST-RESOURCES-MIB, the
+ value MUST be the same value that is used as the index
+ in the hrProcessorTable (hrDeviceIndex)."
+ ::= { vmCpuAffinityEntry 2 }
+
+vmCpuAffinity OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0), -- unknown
+ enable(1), -- enabled
+ disable(2) -- disabled
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CPU affinity of this virtual CPU to the physical
+ CPU represented by 'vmCpuPhysIndex'."
+ ::= { vmCpuAffinityEntry 3 }
+
+-- The virtual storage devices on each virtual machine. This
+-- document defines some overlapped objects with hrStorage in
+-- HOST-RESOURCES-MIB (RFC 2790), because virtual resources are
+-- allocated from the hypervisor's resources, which is the 'host
+-- resources'.
+vmStorageTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VmStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The conceptual table of virtual storage devices
+ attached to the virtual machine."
+ ::= { vmObjects 7 }
+
+vmStorageEntry OBJECT-TYPE
+ SYNTAX VmStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry for one virtual storage device attached to the
+ virtual machine."
+ INDEX { vmStorageVmIndex, vmStorageIndex }
+ ::= { vmStorageTable 1 }
+
+VmStorageEntry ::=
+ SEQUENCE {
+ vmStorageVmIndex VirtualMachineIndexOrZero,
+ vmStorageIndex VirtualMachineStorageIndex,
+ vmStorageParent Integer32,
+ vmStorageSourceType VirtualMachineStorageSourceType,
+ vmStorageSourceTypeString
+ SnmpAdminString,
+ vmStorageResourceID SnmpAdminString,
+ vmStorageAccess VirtualMachineStorageAccess,
+ vmStorageMediaType IANAStorageMediaType,
+ vmStorageMediaTypeString
+ SnmpAdminString,
+ vmStorageSizeUnit Integer32,
+ vmStorageDefinedSize Integer32,
+ vmStorageAllocatedSize Integer32,
+ vmStorageReadIOs Counter64,
+ vmStorageWriteIOs Counter64,
+ vmStorageReadOctets Counter64,
+ vmStorageWriteOctets Counter64,
+ vmStorageReadLatency Counter64,
+ vmStorageWriteLatency Counter64
+ }
+
+vmStorageVmIndex OBJECT-TYPE
+ SYNTAX VirtualMachineIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This value identifies the virtual machine (guest) this
+ storage device has been allocated to. The value zero
+ indicates that the storage device is currently not
+ allocated to any virtual machines."
+ ::= { vmStorageEntry 1 }
+
+vmStorageIndex OBJECT-TYPE
+ SYNTAX VirtualMachineStorageIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value identifying a virtual storage device
+ allocated to the virtual machine."
+ ::= { vmStorageEntry 2 }
+
+vmStorageParent OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of hrStorageIndex, which is the parent (i.e.,
+ physical) device of this virtual device on systems
+ implementing the HOST-RESOURCES-MIB. The value zero
+ denotes this virtual device is not any child
+ represented in the hrStorageTable."
+ ::= { vmStorageEntry 3 }
+
+vmStorageSourceType OBJECT-TYPE
+ SYNTAX VirtualMachineStorageSourceType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The source type of the virtual storage device."
+ ::= { vmStorageEntry 4 }
+
+vmStorageSourceTypeString OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A (detailed) textual string of the source type of the
+ virtual storage device. For example, this represents
+ the specific format name of the sparse file."
+ ::= { vmStorageEntry 5 }
+
+vmStorageResourceID OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual string that represents the resource
+ identifier of the virtual storage. For example, this
+ contains the path to the disk image file that
+ corresponds to the virtual storage."
+ ::= { vmStorageEntry 6 }
+
+vmStorageAccess OBJECT-TYPE
+ SYNTAX VirtualMachineStorageAccess
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The access permission of the virtual storage device."
+ ::= { vmStorageEntry 7 }
+
+vmStorageMediaType OBJECT-TYPE
+ SYNTAX IANAStorageMediaType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The media type of the virtual storage device."
+ ::= { vmStorageEntry 8 }
+
+vmStorageMediaTypeString OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A (detailed) textual string of the virtual storage
+ media. For example, this represents the specific driver
+ name of the emulated media such as 'IDE' and 'SCSI'."
+ ::= { vmStorageEntry 9 }
+
+vmStorageSizeUnit OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The multiplication unit in bytes for
+ vmStorageDefinedSize and vmStorageAllocatedSize. For
+ example, when this value is 1048576, the storage size
+ unit for vmStorageDefinedSize and vmStorageAllocatedSize
+ is MiB."
+ ::= { vmStorageEntry 10 }
+
+vmStorageDefinedSize OBJECT-TYPE
+ SYNTAX Integer32 (-1|0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The defined virtual storage size defined in the unit
+ designated by vmStorageSizeUnit. If this information is
+ not available, this value MUST be -1."
+ ::= { vmStorageEntry 11 }
+
+vmStorageAllocatedSize OBJECT-TYPE
+ SYNTAX Integer32 (-1|0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The storage size allocated to the virtual storage from
+ a physical storage in the unit designated by
+ vmStorageSizeUnit. When the virtual storage is block
+ device or raw file, this value and vmStorageDefinedSize
+ are supposed to equal. This value MUST NOT be different
+ from vmStorageDefinedSize when vmStorageSourceType is
+ 'block' or 'raw'. If this information is not available,
+ this value MUST be -1."
+ ::= { vmStorageEntry 12 }
+
+vmStorageReadIOs OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of read I/O requests.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the hypervisor and
+ administrative state (vmAdminState) changes of the
+ virtual machine."
+ ::= { vmStorageEntry 13 }
+
+vmStorageWriteIOs OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of write I/O requests.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the hypervisor and
+ administrative state (vmAdminState) changes of the
+ virtual machine."
+ ::= { vmStorageEntry 14 }
+
+vmStorageReadOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of bytes read from this device.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the hypervisor and
+ administrative state (vmAdminState) changes of the
+ virtual machine."
+ ::= { vmStorageEntry 15 }
+
+vmStorageWriteOctets OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of bytes written to this device.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the hypervisor and
+ administrative state (vmAdminState) changes of the
+ virtual machine."
+ ::= { vmStorageEntry 16 }
+
+vmStorageReadLatency OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of microseconds read requests have
+ been queued for this device.
+
+ This would typically be implemented by storing the high
+ precision system timestamp of when the request is
+
+ received from the virtual machine with the request, the
+ difference between this initial timestamp and the time
+ at which the requested operation has completed SHOULD be
+ converted to microseconds and accumulated.
+
+ Discontinuities in the value of this counter can occur at
+ re-initialization of the hypervisor and administrative
+ state (vmAdminState) changes of the virtual machine."
+ ::= { vmStorageEntry 17 }
+
+vmStorageWriteLatency OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of microseconds write requests have
+ been queued for this device.
+
+ This would typically be implemented by storing the high
+ precision system timestamp of when the request is
+ received from the virtual machine with the request; the
+ difference between this initial timestamp and the time
+ at which the requested operation has completed SHOULD be
+ converted to microseconds and accumulated.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the hypervisor and
+ administrative state (vmAdminState) changes of the
+ virtual machine."
+ ::= { vmStorageEntry 18 }
+
+-- The virtual network interfaces on each virtual machine.
+vmNetworkTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VmNetworkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The conceptual table of virtual network interfaces
+ attached to the virtual machine."
+ ::= { vmObjects 8 }
+
+vmNetworkEntry OBJECT-TYPE
+ SYNTAX VmNetworkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry for one virtual network interface attached to
+
+ the virtual machine."
+ INDEX { vmIndex, vmNetworkIndex }
+ ::= { vmNetworkTable 1 }
+
+VmNetworkEntry ::=
+ SEQUENCE {
+ vmNetworkIndex VirtualMachineNetworkIndex,
+ vmNetworkIfIndex InterfaceIndexOrZero,
+ vmNetworkParent InterfaceIndexOrZero,
+ vmNetworkModel SnmpAdminString,
+ vmNetworkPhysAddress PhysAddress
+ }
+
+vmNetworkIndex OBJECT-TYPE
+ SYNTAX VirtualMachineNetworkIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value identifying a virtual network interface
+ allocated to the virtual machine."
+ ::= { vmNetworkEntry 1 }
+
+vmNetworkIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of ifIndex, which corresponds to this virtual
+ network interface. If this device is not represented in
+ the ifTable, then this value MUST be zero."
+ ::= { vmNetworkEntry 2 }
+
+vmNetworkParent OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of ifIndex, which corresponds to the parent
+ (i.e., physical) device of this virtual device. The
+ value zero denotes this virtual device is not any
+ child represented in the ifTable."
+ ::= { vmNetworkEntry 3 }
+
+vmNetworkModel OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual string containing the (emulated) model of the
+ virtual network interface. For example, this value is
+ 'virtio' when the emulation driver model is virtio."
+ ::= { vmNetworkEntry 4 }
+
+vmNetworkPhysAddress OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Media Access Control (MAC) address of the virtual
+ network interface."
+ ::= { vmNetworkEntry 5 }
+
+-- Notification definitions:
+
+vmPerVMNotificationsEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates if the notification generator will send
+ notifications per virtual machine. Changes to this
+ object MUST NOT persist across re-initialization of
+ the management system, e.g., SNMP agent."
+ ::= { vmObjects 9 }
+
+vmBulkNotificationsEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates if the notification generator will send
+ notifications per set of virtual machines. Changes to
+ this object MUST NOT persist across re-initialization of
+ the management system, e.g., SNMP agent."
+ ::= { vmObjects 10 }
+
+vmAffectedVMs OBJECT-TYPE
+ SYNTAX VirtualMachineList
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "A complete list of virtual machines whose state has
+ changed. This object is the only object sent with bulk
+ notifications."
+ ::= { vmObjects 11 }
+
+vmRunning NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ running(4) from some other state. The other state is
+ indicated by the included value of vmOperState."
+ ::= { vmNotifications 1 }
+
+vmShuttingdown NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ shuttingdown(10) from some other state. The other state
+ is indicated by the included value of vmOperState."
+ ::= { vmNotifications 2 }
+
+vmShutdown NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ shutdown(11) from some other state. The other state is
+ indicated by the included value of vmOperState."
+ ::= { vmNotifications 3 }
+
+vmPaused NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ paused(8) from some other state. The other state is
+ indicated by the included value of vmOperState."
+ ::= { vmNotifications 4 }
+
+vmSuspending NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ suspending(5) from some other state. The other state is
+ indicated by the included value of vmOperState."
+ ::= { vmNotifications 5 }
+
+vmSuspended NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ suspended(6) from some other state. The other state is
+ indicated by the included value of vmOperState."
+ ::= { vmNotifications 6 }
+
+vmResuming NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ resuming(7) from some other state. The other state is
+ indicated by the included value of vmOperState."
+ ::= { vmNotifications 7 }
+
+vmMigrating NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of a virtual machine has been changed to
+ migrating(9) from some other state. The other state is
+ indicated by the included value of vmOperState."
+ ::= { vmNotifications 8 }
+
+vmCrashed NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when a virtual machine
+ has been crashed. The previous state of the virtual
+ machine is indicated by the included value of
+ vmOperState."
+ ::= { vmNotifications 9 }
+
+vmDeleted NOTIFICATION-TYPE
+ OBJECTS {
+ vmName,
+ vmUUID,
+ vmOperState,
+ vmPersistent
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when a virtual machine
+ has been deleted. The prior state of the virtual
+ machine is indicated by the included value of
+ vmOperState."
+ ::= { vmNotifications 10 }
+
+vmBulkRunning NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machines has been changed
+ to running(4) from any prior state, except for
+ running(4). Management stations are encouraged to
+ subsequently poll the subset of virtual machines of
+ interest for vmOperState."
+ ::= { vmNotifications 11 }
+
+vmBulkShuttingdown NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machines has been changed
+ to shuttingdown(10) from a state other than
+ shuttingdown(10). Management stations are encouraged to
+ subsequently poll the subset of virtual machines of
+ interest for vmOperState."
+ ::= { vmNotifications 12 }
+
+vmBulkShutdown NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machine has been changed to
+ shutdown(11) from a state other than shutdown(11).
+ Management stations are encouraged to subsequently poll
+ the subset of virtual machines of interest for
+ vmOperState."
+ ::= { vmNotifications 13 }
+
+vmBulkPaused NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machines has been changed
+ to paused(8) from a state other than paused(8).
+
+ Management stations are encouraged to subsequently poll
+ the subset of virtual machines of interest for
+ vmOperState."
+ ::= { vmNotifications 14 }
+
+vmBulkSuspending NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machines has been changed
+ to suspending(5) from a state other than suspending(5).
+ Management stations are encouraged to subsequently poll
+ the subset of virtual machines of interest for
+ vmOperState."
+ ::= { vmNotifications 15 }
+
+vmBulkSuspended NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machines has been changed
+ to suspended(6) from a state other than suspended(6).
+ Management stations are encouraged to subsequently poll
+ the subset of virtual machines of interest for
+ vmOperState."
+ ::= { vmNotifications 16 }
+
+vmBulkResuming NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machines has been changed
+ to resuming(7) from a state other than resuming(7).
+ Management stations are encouraged to subsequently poll
+ the subset of virtual machines of interest for
+ vmOperState."
+ ::= { vmNotifications 17 }
+
+vmBulkMigrating NOTIFICATION-TYPE
+
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when the operational
+ state of one or more virtual machines has been changed
+ to migrating(9) from a state other than migrating(9).
+ Management stations are encouraged to subsequently poll
+ the subset of virtual machines of interest for
+ vmOperState."
+ ::= { vmNotifications 18 }
+
+vmBulkCrashed NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when one or more virtual
+ machines have been crashed. Management stations are
+ encouraged to subsequently poll the subset of virtual
+ machines of interest for vmOperState."
+ ::= { vmNotifications 19 }
+
+vmBulkDeleted NOTIFICATION-TYPE
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "This notification is generated when one or more virtual
+ machines have been deleted. Management stations are
+ encouraged to subsequently poll the subset of virtual
+ machines of interest for vmOperState."
+ ::= { vmNotifications 20 }
+
+-- Compliance definitions:
+vmCompliances OBJECT IDENTIFIER ::= { vmConformance 1 }
+vmGroups OBJECT IDENTIFIER ::= { vmConformance 2 }
+
+vmFullCompliances MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Compliance statement for implementations supporting
+ read/write access, according to the object definitions."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+
+ vmHypervisorGroup,
+ vmVirtualMachineGroup,
+ vmCpuGroup,
+ vmCpuAffinityGroup,
+ vmStorageGroup,
+ vmNetworkGroup
+ }
+ GROUP vmPerVMNotificationOptionalGroup
+ DESCRIPTION
+ "Support for per-VM notifications is optional. If not
+ implemented, then vmPerVMNotificationsEnabled MUST report
+ false(2)."
+ GROUP vmBulkNotificationsVariablesGroup
+ DESCRIPTION
+ "Necessary only if vmPerVMNotificationOptionalGroup is
+ implemented."
+ GROUP vmBulkNotificationOptionalGroup
+ DESCRIPTION
+ "Support for bulk notifications is optional. If not
+ implemented, then vmBulkNotificationsEnabled MUST report
+ false(2)."
+ ::= { vmCompliances 1 }
+
+vmReadOnlyCompliances MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Compliance statement for implementations supporting
+ only read-only access."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ vmHypervisorGroup,
+ vmVirtualMachineGroup,
+ vmCpuGroup,
+ vmCpuAffinityGroup,
+ vmStorageGroup,
+ vmNetworkGroup
+ }
+
+ OBJECT vmPerVMNotificationsEnabled
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT vmBulkNotificationsEnabled
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+ ::= { vmCompliances 2 }
+
+vmHypervisorGroup OBJECT-GROUP
+ OBJECTS {
+ vmHvSoftware,
+ vmHvVersion,
+ vmHvObjectID,
+ vmHvUpTime,
+ vmNumber,
+ vmTableLastChange,
+ vmPerVMNotificationsEnabled,
+ vmBulkNotificationsEnabled
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing insight into the
+ hypervisor itself."
+ ::= { vmGroups 1 }
+
+vmVirtualMachineGroup OBJECT-GROUP
+ OBJECTS {
+ -- vmIndex
+ vmName,
+ vmUUID,
+ vmOSType,
+ vmAdminState,
+ vmOperState,
+ vmAutoStart,
+ vmPersistent,
+ vmCurCpuNumber,
+ vmMinCpuNumber,
+ vmMaxCpuNumber,
+ vmMemUnit,
+ vmCurMem,
+ vmMinMem,
+ vmMaxMem,
+ vmUpTime,
+ vmCpuTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing insight into the
+ virtual machines controlled by a hypervisor."
+ ::= { vmGroups 2 }
+
+vmCpuGroup OBJECT-GROUP
+ OBJECTS {
+ -- vmCpuIndex,
+ vmCpuCoreTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing insight into the
+ virtual machines controlled by a hypervisor."
+ ::= { vmGroups 3 }
+
+vmCpuAffinityGroup OBJECT-GROUP
+ OBJECTS {
+ -- vmCpuPhysIndex,
+ vmCpuAffinity
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing insight into the
+ virtual machines controlled by a hypervisor."
+ ::= { vmGroups 4 }
+
+vmStorageGroup OBJECT-GROUP
+ OBJECTS {
+ -- vmStorageVmIndex,
+ -- vmStorageIndex,
+ vmStorageParent,
+ vmStorageSourceType,
+ vmStorageSourceTypeString,
+ vmStorageResourceID,
+ vmStorageAccess,
+ vmStorageMediaType,
+ vmStorageMediaTypeString,
+ vmStorageSizeUnit,
+ vmStorageDefinedSize,
+ vmStorageAllocatedSize,
+ vmStorageReadIOs,
+ vmStorageWriteIOs,
+ vmStorageReadOctets,
+ vmStorageWriteOctets,
+ vmStorageReadLatency,
+ vmStorageWriteLatency
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing insight into the
+ virtual storage devices controlled by a hypervisor."
+ ::= { vmGroups 5 }
+
+vmNetworkGroup OBJECT-GROUP
+ OBJECTS {
+
+ -- vmNetworkIndex,
+ vmNetworkIfIndex,
+ vmNetworkParent,
+ vmNetworkModel,
+ vmNetworkPhysAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing insight into the
+ virtual network interfaces controlled by a hypervisor."
+ ::= { vmGroups 6 }
+
+vmPerVMNotificationOptionalGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ vmRunning,
+ vmShuttingdown,
+ vmShutdown,
+ vmPaused,
+ vmSuspending,
+ vmSuspended,
+ vmResuming,
+ vmMigrating,
+ vmCrashed,
+ vmDeleted
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of notifications for per-VM notification
+ of changes to virtual machine state (vmOperState) as
+ reported by a hypervisor."
+ ::= { vmGroups 7 }
+
+vmBulkNotificationsVariablesGroup OBJECT-GROUP
+ OBJECTS {
+ vmAffectedVMs
+ }
+ STATUS current
+ DESCRIPTION
+ "The variables used in vmBulkNotificationOptionalGroup
+ virtual network interfaces controlled by a hypervisor."
+ ::= { vmGroups 8 }
+
+vmBulkNotificationOptionalGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ vmBulkRunning,
+ vmBulkShuttingdown,
+ vmBulkShutdown,
+ vmBulkPaused,
+ vmBulkSuspending,
+ vmBulkSuspended,
+ vmBulkResuming,
+ vmBulkMigrating,
+ vmBulkCrashed,
+ vmBulkDeleted
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of notifications for bulk notification of
+ changes to virtual machine state (vmOperState) as
+ reported by a given hypervisor."
+ ::= { vmGroups 9 }
+
+END
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 20:02:34 +0000