diff options
Diffstat (limited to 'share')
| -rw-r--r-- | share/termtypes/termtypes.master | 1061 |
1 files changed, 916 insertions, 145 deletions
diff --git a/share/termtypes/termtypes.master b/share/termtypes/termtypes.master index e00c4d4cef3..1b9e4c235fa 100644 --- a/share/termtypes/termtypes.master +++ b/share/termtypes/termtypes.master @@ -1,22 +1,20 @@ ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE # -# $OpenBSD: termtypes.master,v 1.13 2000/02/06 07:05:57 millert Exp $ -# # This version of terminfo.src is distributed with ncurses. # Report bugs to # bug-ncurses@gnu.org # # Version 10.2.1 -# Date: 2000/02/06 03:29:26 +# Date: 2000/03/05 03:53:58 # terminfo syntax # # Eric S. Raymond (current maintainer) # John Kunze, Berkeley # Craig Leres, Berkeley # -# Please e-mail changes to terminfo@ccil.org; the old termcap@berkeley.edu +# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu # address is no longer valid. The latest version can always be found at -# <http://earthspace.net/terminfo>. +# <http://www.tuxedo.org/terminfo>. # # PURPOSE OF THIS FILE: # @@ -32,7 +30,7 @@ # termcap/terminfo versions. # # Pointers to related resources (including the ncurses distribution) may -# be found at <http://earthspace.net/terminfo>. +# be found at <http://www.tuxedo.org/terminfo>. # # INTERNATIONALIZATION: # @@ -195,8 +193,8 @@ # the inverse sense from the cup string). The typical CPR value is # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). # -# These capabilities are used by tac(1m), the terminfo action checker soon -# to be distributed with ncurses. +# These capabilities are used by tack(1m), the terminfo action checker +# (distributed with ncurses 5.0). # # TABSET FILES # @@ -214,7 +212,7 @@ # As the ANSI/ECMA-48 standard and variants take firmer hold, and as # character-cell terminals are increasingly replaced by X displays, much of # this file is becoming a historical document (this is part of the reason for -# the new organization, which puts ANSI types, xterm, free-Unix consoles, +# the new organization, which puts ANSI types, xterm, Unix consoles, # and vt100 up front in confidence that this will catch 95% of new hardware). # # For the terminal types still alive, I'd like to have manufacturer's @@ -259,7 +257,7 @@ ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES # -# This section describes terminal classes and maker brands that are still +# This section describes terminal classes and brands that are still # quite common. # @@ -405,6 +403,7 @@ ansi-mini|any ansi terminal with pessimistic assumptions, # # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. # +# (Added vt100 <rc>,<sc> to quiet a tic warning --esr) ansi77|ansi 3.64 standard 1977 version, OTbs, am, mir, cols#80, it#8, lines#24, @@ -413,9 +412,9 @@ ansi77|ansi 3.64 standard 1977 version, cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, - kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, ri=\EM, - rmir=\E[4l, rmso=\E[m, rmul=\E[m, smir=\E[4h, smso=\E[7m, - smul=\E[4m, + kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, + rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, + smso=\E[7m, smul=\E[4m, # Procomm and some other ANSI emulations don't recognize all of the ANSI- # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and @@ -583,6 +582,32 @@ beterm|BeOS Terminal, # 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size # themselves; this entry assumes that capability. # +# This entry is good for the 1.2.13 or later version of the Linux console. +# +# *************************************************************************** +# * * +# * WARNING: * +# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * +# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * +# * character. Here are the keymap replacement lines that will set this up: * +# * * +# keycode 15 = Tab Tab +# alt keycode 15 = Meta_Tab +# shift keycode 15 = F26 +# string F26 ="\033[Z" +# * * +# * This has to use a key slot which is unfortunate (any unused one will * +# * do, F26 is the higher-numbered one). The change ought to be built * +# * into the kernel tables. * +# * * +# *************************************************************************** +# +# The 1.3.x kernels add color-change capabilities; if yours doesn't have this +# and it matters, turn off <ccc>. The %02x escape used to implement this is +# not back-portable to SV curses and not supported in ncurses versions before +# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size +# themselves; this entry assumes that capability. +# # The 2.2.x kernels add a private mode that sets the cursor type; use that to # get a block cursor for cvvis. # reported by Frank Heckenbach <frank@g-n-u.de>. @@ -644,7 +669,15 @@ linux-koi8r|linux with koi8-r alternate character set, kbs=^H, kcub1=^H, kcud1=^J, use=linux, use=klone+koi8acs, -# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk> +# Entry for the latin1 and latin2 fonts +linux-lat|linux with latin1 or latin2 alternate character set, + acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, + use=linux, + +#### Mach +# + +# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk> mach|Mach Console, am, km, cols#80, it#8, lines#25, @@ -668,10 +701,16 @@ mach-color|Mach Console with ANSI color, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, -# Entry for the latin1 and latin2 fonts -linux-lat|linux with latin1 or latin2 alternate character set, - acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, - use=linux, +#### OSF Unix +# + +# OSF/1 1.1 Snapshot 2 +pmcons|pmconsole|PMAX console, + am, + cols#128, lines#57, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, + ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, # SCO console and SOS-Syscons console for 386bsd # (scoansi: had unknown capabilities @@ -1010,6 +1049,8 @@ ibmpcx|xenix|ibmx|IBM PC xenix console display, kpp=\E[Z, use=klone+acs, use=klone+sgr, +#### QNX +# # QNX 4.0 Console # Michael's original version of this entry had <am@>, <smcup=\Ei>, @@ -1399,11 +1440,21 @@ bsdos-sparc|Sun SPARC BSD/OS Console, bsdos-ppc|PowerPC BSD/OS Console, use=bsdos-pc, +#### DEC VT52 +# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) +vt52|dec vt52, + OTbs, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, + #### DEC VT100 and compatibles # -# DEC terminals from the vt100 forward (and the vt52, way obsolete but still -# the basis of some emulations) are collected here. Older DEC terminals and -# micro consoles can be found in the `obsolete' section. More details on +# DEC terminals from the vt100 forward are collected here. Older DEC terminals +# and micro consoles can be found in the `obsolete' section. More details on # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be # found near the end of this file. # @@ -1417,16 +1468,6 @@ bsdos-ppc|PowerPC BSD/OS Console, # its name to Boundless Technologies; see http://www.boundless.com. # -# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) -vt52|dec vt52, - OTbs, - cols#80, it#8, lines#24, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, - el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, - # NOTE: Any VT100 emulation, whether in hardware or software, almost # certainly includes what DEC called the `Level 1 editing extension' codes; # only the very oldest VT100s lacked these and there probably aren't any of @@ -1454,6 +1495,45 @@ vt52|dec vt52, # reset upon login. Also setting the number of columns glitches # the screen annoyingly. You can type "reset" to get them set. # +# The VT100 series terminals have cursor ("arrows") keys which can operate +# in two different modes: Cursor Mode and Application Mode. Cursor Mode +# is the reset state, and is assumed to be the normal state. Application +# Mode is the "set" state. In Cursor Mode, the cursor keys transmit +# "Esc [ {code}" sequences, conforming to ANSI standards. In Application +# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode +# was provided primarily as an aid to the porting of VT52 applications. It is +# assumed that the cursor keys are normally in Cursor Mode, and expected that +# applications such as vi will always transmit the <smkx> string. Therefore, +# the definitions for the cursor keys are made to match what the terminal +# transmits after the <smkx> string is transmitted. If the <smkx> string +# is a null string or is not defined, then cursor keys are assumed to be in +# "Cursor Mode", and the cursor keys definitions should match that assumption, +# else the application may fail. It is also expected that applications will +# always transmit the <rmkx> string to the terminal before they exit. +# +# The VT100 series terminals have an auxiliary keypad, commonly referred to as +# the "Numeric Keypad", because it is a cluster of numeric and function keys. +# The Numeric Keypad which can operate in two different modes: Numeric Mode and +# Application Mode. Numeric Mode is the reset state, and is assumed to be +# the normal state. Application Mode is the "set" state. In Numeric Mode, +# the numeric and punctuation keys transmit ASCII 7-bit characters, and the +# Enter key transmits the same as the Return key (Note: the Return key +# can be configured to send either LF (\015) or CR LF). In Application Mode, +# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys +# always send the same "Esc O {code}" sequences. It is assumed that the keypad +# is normally in Numeric Mode. If an application requires that the keypad be +# in Application Mode then it is expected that the user, or the application, +# will set the TERM environment variable to point to a terminfo entry which has +# defined the <smkx> string to include the codes that switch the keypad into +# Application Mode, and the terminfo entry will also define function key +# fields to match the Application Mode control codes. If the <smkx> string +# is a null string or is not defined, then the keypad is assumed to be in +# Numeric Mode. If the <smkx> string switches the keypad into Application +# Mode, it is expected that the <rmkx> string will contain the control codes +# necessary to reset the keypad to "Normal" mode, and it is also expected that +# applications which transmit the <smkx> string will also always transmit the +# <rmkx> string to the terminal before they exit. +# # Here's a diagram of the VT100 keypad keys with their bindings. # The top line is the name of the key (some DEC keyboards have the keys # labelled somewhat differently, like GOLD instead of PF1, but this is @@ -1631,16 +1711,14 @@ vt132|DEC vt132, ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, -# vt220: # This vt220 description maps F5--F9 to the second block of function keys # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. # PF1--PF4 are used as F1--F4. # -vt220|vt200|DEC VT220 in vt100 emulation mode, - OTbs, OTpt, am, mir, xenl, xon, +vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, + am, mir, xenl, xon, cols#80, lines#24, vt#3, - OTnl=^J, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, @@ -1648,8 +1726,8 @@ vt220|vt200|DEC VT220 in vt100 emulation mode, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, - is2=\E[1;24r\E[24;1H, kbs=\177, kcub1=\EOD, kcud1=\EOB, - kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, + is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, @@ -1660,33 +1738,11 @@ vt220|vt200|DEC VT220 in vt100 emulation mode, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, -vt220-w|vt200-w|DEC vt220 in wide mode, - cols#132, - rs3=\E[?3h, use=vt220, - -# -# vt220d: -# This vt220 description regards F6--F10 as the second block of function keys -# at the top of the keyboard. This mapping follows the description given -# in the VT220 Programmer Reference Manual and agrees with the labeling -# on some terminals that emulate the vt220. There is no support for an F5. -# See vt220 for an alternate mapping. -# -vt220d|DEC VT220 in vt100 mode with DEC function key labeling, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, - kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, - kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, - kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - use=vt220, - -vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, - am@, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, -# This is misnamed (see xterm-8bit for an example of 8-bit controls) -vt220-8|dec vt220 8 bit terminal, - OTbs, am, mc5i, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, +# A much better description of the VT200/220; used to be vt220-8 +vt220|vt200|dec vt220, + am, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, @@ -1697,8 +1753,8 @@ vt220-8|dec vt220 8 bit terminal, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, ind=\ED, - is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=\177, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, + is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, @@ -1709,6 +1765,54 @@ vt220-8|dec vt220 8 bit terminal, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, +vt220-w|vt200-w|DEC vt220 in wide mode, + cols#132, + rs3=\E[?3h, use=vt220, +vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, + am, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, + csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, + cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, + cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, + dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, + ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, + flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, + ich=\233%p1%d@, if=/usr/share/tabset/vt100, + il=\233%p1%dL, il1=\233L, ind=\ED, + is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, + kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, + kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, + kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, + kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, + kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, + kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, + knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, + lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, + nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, + rmir=\2334l, rmso=\23327m, rmul=\23324m, rs1=\233?3l, + sc=\E7, sgr0=\233m, smacs=^N, smam=\233?7h, smir=\2334h, + smso=\2337m, smul=\2334m, tbc=\2333g, + +# +# vt220d: +# This vt220 description regards F6--F10 as the second block of function keys +# at the top of the keyboard. This mapping follows the description given +# in the VT220 Programmer Reference Manual and agrees with the labeling +# on some terminals that emulate the vt220. There is no support for an F5. +# See vt220 for an alternate mapping. +# +vt220d|DEC VT220 in vt100 mode with DEC function key labeling, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + use=vt220-old, + +vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, + am@, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko # (not an official DEC entry!) @@ -1724,6 +1828,7 @@ vt220-8|dec vt220 8 bit terminal, # it has a vt220 and will get fouled up coming out of emacs # # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 +# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr) vt200-js|vt220-js|dec vt200 series with jump scroll, am, cols#80, @@ -1732,11 +1837,11 @@ vt200-js|vt220-js|dec vt200 series with jump scroll, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, - kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, - rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smdc=, + rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, # This was DEC's vt320. Use the purpose-built one below instead @@ -1761,7 +1866,7 @@ vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, # I left out <sgr> because of its RIDICULOUS complexity, # and the resulting fact that it causes the termcap translation of the entry # to SMASH the 1k-barrier... -# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995 +# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 # (vt320: uncommented <fsl> --esr) vt320|vt300|dec vt320 7 bit terminal, am, eslok, hs, mir, msgr, xenl, @@ -1844,7 +1949,7 @@ vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, - kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, @@ -1890,7 +1995,7 @@ vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, - kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, @@ -1913,7 +2018,7 @@ vt420|DEC VT420, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, - is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, @@ -2010,7 +2115,7 @@ vt520|DEC VT520, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, - is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, @@ -2037,7 +2142,7 @@ vt525|DEC VT525, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, - is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, @@ -2072,7 +2177,7 @@ dec-vt220|DOS tnvt200 terminal emulator, # RDBM systems, it includes ReGIS and SiXel support! I'm impressed... # I can send the address if requested. # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) -# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995 +# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 z340|zstem vt340 terminal emulator 132col 42line, lines#42, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, @@ -2260,11 +2365,11 @@ xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, - enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, - hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=^J, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=^J, is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, @@ -2297,19 +2402,20 @@ xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), # This version was released in XFree86 3.3.3 (November 1998). # Besides providing printer support, it exploits a new feature that allows # xterm to use terminfo-based descriptions with the titeInhibit resource. +# -- the distribution contained incorrect khome/kend values -TD xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), mc5i, blink=\E[5m, ich1@, invis=\E[8m, - is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kend=\E[4~, - kfnd@, khome=\E[1~, kslt@, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, - rmcup=\E[?1047l\E[?1048l, rs1=\Ec, - rs2=\E[!p\E[?3;4l\E[4l\E>, + is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, + mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, + rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33, # This beta version will probably be released in XFree86 4.0. xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), + npc, kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, @@ -2324,6 +2430,7 @@ xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, + sgr=\E[0%?%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, smcup=\E[?1049h, use=xterm-xf86-v333, @@ -2365,7 +2472,7 @@ xterm-88color|xterm with 88 colors, # CSI \E [ \233 # xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), - OTbs, am, bce, km, mc5i, mir, msgr, xenl, + OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, @@ -2373,12 +2480,12 @@ xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, - cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P, - dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, - el=\233K, el1=\2331K, enacs=\E(B\E)0, - flash=\233?5h\233?5l, home=\233H, hpa=\233%i%p1%dG, - ht=^I, hts=\210, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, - ind=^J, invis=\2338m, + dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, + ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, + enacs=\E(B\E)0, flash=\233?5h$<100/>\233?5l, + home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210, + ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J, + invis=\2338m, is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B, @@ -2564,11 +2671,10 @@ rxvt-basic|rxvt terminal base (X Window System), csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, - flash=\E[?5h\E[?5l, home=\E[H, ht=^I, hts=\EH, - ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, - is1=\E[?47l\E=\E[?1l, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l, is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, @@ -2694,9 +2800,9 @@ emu|emu native mode, clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;, - cuu=\Ep-%p1%d;, cuu1=\EA, cvvis=\Ea, dch=\EI%p1%d;, - dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, - el=\EK, el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh, + cuu=\Ep-%p1%d;, cuu1=\EA, dch=\EI%p1%d;, dch1=\EI1;, + dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, el=\EK, + el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10, @@ -2785,7 +2891,8 @@ eterm|gnu emacs term.el terminal emulation, sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, smul=\E[4m, -# Entries for use by the FSF's `screen' program. The screen and +# Entries for use by the `screen' program by Juergen Weigert, +# Michael Schroeder, Oliver Laumann. The screen and # screen-w entries came with version 3.7.1. The screen2 and screen3 entries # come from University of Wisconsin and may be older. # (screen: added <cnorm> on ANSI model -- esr) @@ -3179,7 +3286,7 @@ news-old-unk|SONY NEWS vt100 emulator common entry, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, # # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr) -nwp512|news|nwp514|news40|vt100-bm|sony vt100 emulator 40 lines, +nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, OTbs, lines#40, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk, @@ -3203,14 +3310,13 @@ nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, # # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr) # also the alias vt100-bm. -nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|sony vt100 emulator 33 lines, +nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, OTbs, lines#33, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, use=news-old-unk, # # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr) -nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|sony vt100 emulator 33 lines, - OTbs, +nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, lines#31, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk, # @@ -3411,6 +3517,26 @@ ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, +# From: jew@venus.sunquest.com +# Date: 19 Feb 93 23:41:07 GMT +# Here's a combination of ansi and vt100 termcap +# entries that works nearly perfectly for me +# (Gateway 2000 Handbook and Microsoft Works 3.0): +pcmw|PC running Microsoft Works, + am, xenl, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, + clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, + cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, + cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, + ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, + rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100, + ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, + tbc=\E[3g$<2/>, ######## COMMON TERMINAL TYPES # @@ -3510,6 +3636,12 @@ altos7pc|alt7pc|altos PC VII, # Vox: 1-(916)-785-4363 (Technical response line for VDTs) # 1-(800)-633-3600 (General customer support) # +# +# As of March 1998, HP no longer has any terminals in production. +# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being +# supported (they still have parts). So are the 2392a and 2394a. +# See the WORKSTATION CONSOLES section for the 700s. +# # Generic HP terminal - this should (hopefully) work on any HP terminal. hpgeneric|hp|hewlett-packard generic terminal, @@ -4082,8 +4214,7 @@ hp700-wy|HP700/41 emulating wyse30, ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, -# (hp70092: added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) -hp70092|hp70092a|hp70092A|70092|HP 700/92, +hp70092|hp70092a|hp70092A|HP 700/92, am, da, db, xhp, cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, @@ -5453,7 +5584,7 @@ vi50adm|visual 50 in adm3a mode, ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, rmso=\ET, smso=\EU, -# From: Jeff Siegal <jbs@athena.mit.edu> +# From: Jeff Siegal <jbs@quiotix.com> vi55|Visual 55, OTbs, am, mir, msgr, cols#80, it#8, lines#24, @@ -6287,6 +6418,52 @@ wy85-w|wyse85-w|wyse 85 in 132-column mode, wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, bel@, use=wy85-w, + +# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998 +# This copes with an apparent firmware bug in the wy85. He writes: +# "What I did was change leave the terminal cursor keys set to Normal +# (instead of application), and change \E[ to \233 for all the keys in +# terminfo. At one point, I found some reference indicating that this +# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just +# me), but I can't find that and the server under my bookmark to "Wyse +# Technical" isn't responding. So there's the question of wether the wy85 +# terminfo should reflect the manufactuer's intended behaviour of the terminal +# or the actual." +wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, + am, hs, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, + dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, + ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, + enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, + fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, + ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, + ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, + is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, + kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, + kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, + kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, + kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, + kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, + kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, + kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, + khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, + kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, + mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, + rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, + rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, + rs3=\E[?5l, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[40h\E7\E[25;%i%p1%dH, # # Wyse 185 emulating a vt320 7 bit mode. # @@ -6705,12 +6882,12 @@ wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, # # Wyse 520 with 24 data lines and status (terminal status) # with EPC keyboard. -wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines, +wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, hs@, dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc, # # Wyse 520 with visual bell. -wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell, +wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc, # @@ -6722,7 +6899,7 @@ wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, use=wy520-epc, # # Wyse 520 in 132-column mode with visual bell. -wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns, +wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w, # @@ -6770,7 +6947,7 @@ wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc, # # Wyse 520 in 132-column, 48 lines with EPC keyboard -wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines, +wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, cols#132, wsl#132, rs2=\E[?3h, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc, @@ -9843,9 +10020,12 @@ dg211|Data General d211, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200, -# dg450 from cornell + +# dg450 from Cornell (not official) dg450|dg6134|data general 6134, cub1@, cuf1=^X, use=dg200, + +# Not official... # Note: lesser Dasher terminals will not work with vi because vi insists upon # having a command to move straight down from any position on the bottom line # and scroll the screen up, or a direct vertical scroll command. The 460 and @@ -9869,7 +10049,7 @@ dg460-ansi|Data General Dasher 460 in ANSI-mode, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m, smul=\E[4m, -# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> +# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official) # Data General 605x # Ought to work for a Model 6242, Type D210 as well as a 605x. # Note that the cursor-down key transmits ^Z. Job control users, beware! @@ -10361,24 +10541,10 @@ d578-7b|Data General DASHER D578 in 7-bit mode, #### Datamedia (dm) # -# Datamedia was headquartered in Nashua, New Hampshire in 1993. -# As of early 1996, at least one company called `Datamedia' has been taken -# over by: -# -# Axent Technologies, Inc. -# 2400 Research Boulevard -# Rockville, Maryland 20850 -# voice: +1 301/258-5043 -# fax: +1 301/330-5756 -# email: <info@axent.com> -# -# makers of OmniGuard client/server security software. They are a software -# only company and no longer make terminals. However, the operator there -# told me that she had once spoken to a customer looking for Datamedia -# terminals who'd mentioned a Datamedia in New Jersey. This is backed up -# by comp.terminals posting describing the ID plate on the back of a -# "Datamedia 3000" terminal. Was this an earlier incarnation of Axent? -# Inquiring minds want to know... +# Datamedia was headquartered in Nashua, New Hampshire until it went +# out of business in 1993, but the ID plates on the terminals referred +# to the factory in Pennsauken, NJ. The factory was sold to a PCB board +# manufacturer which threw out all information about the terminals. # cs10|colorscan|Datamedia Color Scan 10, @@ -10485,7 +10651,7 @@ dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, clear=\E[H\E[2J$<50/>, cud1=^J, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, -# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995 +# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 dt80-sas|Datamedia DT803/DTX for SAS usage, am, bw, cols#80, lines#24, @@ -10867,6 +11033,16 @@ superbeeic|super bee with insert char, sb2|sb3|fixed superbee, xsb@, use=superbee, +#### Beehive Medical Electronics +# +# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999): +# Regarding your question though; Beehive terminals weren't made by Harris. +# They were made by Beehive Medical Electronics in Utah. They went out of +# business in the early '80s. +# +# (OK, then, I don't know why a couple of these say "harris beehive".) +# + # Reports are that most of these Beehive entries (except superbee) have not # been tested and do not work right. <rmso> is a trouble spot. Be warned. @@ -10897,6 +11073,9 @@ beehive4|bh4|beehive 4, cols#80, lines#24, bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J, +# There was an early Australian kit-built computer called a "Microbee". +# It's not clear whether this is for one of those or for a relative +# of the Beehive. microb|microbee|micro bee series, OTbs, am, cols#80, it#8, lines#24, @@ -11259,13 +11438,59 @@ hft-c|HFT with Color, hft-c-old|HFT with Color PC850, colors#8, pairs#64, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, +hft|AIWS High Function Terminal, + am, xon, + cols#80, lines#25, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, + ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, + kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, + kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q, + ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, ibm-system1|system1|ibm system/1 computer, am, xt, cols#80, lines#24, bel=^G, clear=^Z, cub1=^H, cuf1=^\, cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K, ind=^J, -ibm5081|hft|IBM Megapel Color display, +# lft-pc850 : IBM Low Function Terminal Device +# lft "supports" underline, bold, and blink in the sense that the lft code +# sets all the right bits. HOWEVER, depending upon the adapter, these +# attributes may or may not be supported by the device driver. +lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device, + am, bw, msgr, xon, + cols#80, it#8, lines#25, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K, + home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL, + il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, + kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, + kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q, + kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, + kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, + kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, + kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, + kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, + kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, + kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, + kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, + kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, + kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q, + kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT, + rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, +ibm5081|IBM Megapel Color display, acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B, s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154, @@ -12237,18 +12462,18 @@ ergo4000|microterm ergo 4000, # identical, except for case, to lower-case ones. I also uncommented the acsc # capabilities.X # -# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a +# The Intecolor emulation of the NCR 2900/260C color terminal is basically a # DEC vt200/300 with color capabilities added. ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, colors#8, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300an, -# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a +# The Intecolor emulation of the NCR 2900/260C color terminal is basically a # DEC vt200/300 with color capabilities added. ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, colors#8, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wan, -# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a DEC -# vt200/300 with color capabilities added. +# The Intecolor emulation of the NCR 2900/260C color terminal is basically a +# DEC vt200/300 with color capabilities added. ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard, colors#8, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300pp, @@ -12757,6 +12982,21 @@ ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal, # 7 - Enable / Disable CR turnoff # 8 - Enable / Disable backspace # +# Since each attribute parameter is 0 or 1, we shift each attribute (standout, +# reverse, blink, dim, and underline) the appropriate number of bits (by +# multiplying the 0 or 1 by a correct factor to shift) so the bias character, +# '@' is (effectively) "or"ed with each attribute to generate the proper third +# character in the <ESC>0 sequence. The <sgr> string implements the following +# equation: +# +# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) => +# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17)) +# +# Where: P1 <==> Standout attribute parameter +# P2 <==> Underline attribute parameter +# P3 <==> Reverse attribute parameter +# P4 <==> Blink attribute parameter +# P5 <==> Dim attribute parameter # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO. ncr7900i|ncr7900|ncr 7900 model 1, am, bw, ul, @@ -12778,6 +13018,10 @@ ncr7900iv|ncr 7900 model 4, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J, tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, +# Warning: This terminal will lock out the keyboard when it receives a CTRL-D. +# The user can enter a CTRL-B to get out of this locked state. +# In <hpa>, we want to output the character given by the formula: +# ((col / 10) * 16) + (col % 10) where "col" is "p1" ncr7901|ncr 7901 model, am, bw, ul, cols#80, lines#24, @@ -13564,7 +13808,7 @@ kaypro|kaypro2|kaypro II, el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K, # From IBM, Thu May 5 19:35:27 1983 -# (commented out <smir>=\200R because we don't know <rmir> -- esr) +# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr) ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS), OTbs, am, cols#80, lines#24, @@ -13905,6 +14149,7 @@ st52|Atari ST with VT52 emulation, # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90 # Added a few more entries, converted caret-type control sequence (^x) entries # to '\0xx' entries since a couple of people mentioned losing '^x' sequences. +# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998 # # :as:, :ae: Support for alternate character sets. # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. @@ -13928,12 +14173,12 @@ amiga|Amiga ANSI, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, - indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\ED, - kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E9~, kf1=\E0~, - kf2=\E1~, kf3=\E2~, kf4=\E3~, kf5=\E4~, kf6=\E5~, kf7=\E6~, - kf8=\E7~, kf9=\E8~, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, - rmacs=^O, rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N, - smso=\E[7m, smul=\E[4m, + indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, + kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, + kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m, + ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m, + rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995 # (amiga: added empty <acsc> to suppress a warning. @@ -14148,6 +14393,19 @@ mai|basic4|MAI Basic Four in ansi mode, smir=\E[4h, smso=\E[7m, smul=\E[4m, # basis from Peter Harrison, Computer Graphics Lab, San Francisco # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA +# +# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote: +# The Basis 108 was a Apple II clone, manufactured by the "Basis +# Mikrocomputer GmbH" in Munster, Germany (the company still exists today, +# about 1,5 km from where I live, but doesn't build own computers any +# more). A Basis 108 featured a really heavy (cast aluminium?) case, was +# equipped with one or two 5.25" disk drives, had a monochrome and colour +# video output for a TV set or a dedicated monitor and several slots for +# Apple II cards. Basis 108 were quite popular at german schools before +# the advent of the IBM PC. They run, for example, the UCSD Pascal +# development system (which I used even in 1993 to program the steering +# and data recording for our school's experimental solar panel :), Apple DOS +# or CP/M. # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) basis|BASIS108 computer with terminal translation table active, clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, @@ -14375,6 +14633,488 @@ bg1.25|bbn bitgraph 1.25, rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=, smso=\E[7m, +#### Bull (bq, dku, vip) +# +# (Adapted for terminfo; AIX extension capabilities translated -- esr) + +#============================================# +# BULL QUESTAR 210 `SDP' terminals emulation # +#============================================# +# +# Description written by R.K.Saunders (Bull Transac) +# +# Modifications written by F. Girard (Bull MTS) +# 19-05-87 V02.00.01 +# 17-12-87 V02.00.02 +# 15-09-89 V02.00.05 +# +# Typical technical selections F1 (modes SDP/ROLL): +# ------------------------------------------------------- +# | 01 02 03 04 05 06 07 08 09 10 | +# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 | +# | | +# | 11 12 13 14 15 16 17 18 19 20 | +# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 | +# | | +# | 21 22 23 24 25 26 27 28 29 30 | +# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 | +# | | +# | 31 32 33 34 35 36 37 38 39 40 | +# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 | +# ------------------------------------------------------- +# Typical firmware identification F5 "etat 6": +# P287.02.04b (AZERTY) +# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764) +# P298.03.03 (monochrome) or P374.03.02 (colour) +# +# SM SDP mode (VIP command): ^[[?=h +# RIS (erases screen): ^[c +# DMI disable keyboard: ^[` +# SM double rendition mode: ^[[?>h +# RM solicited status mode: ^[[5l +# RM character mode: ^[[>l +# RM echoplex mode: ^[[12l +# RM column tab mode: ^[[18l +# RM forbid SS2 keyboard mode: ^[[?<l +# SM scroll mode: ^[[=h +# FCF enable XON/XOFF: ^[P1s^[\ +# MTL select end msg character: ^[[^Wp +# EMI enable keyboard: ^[b +# RIS retour etat initial: ^[c +# enable FC keypad: ^[[?<h, +# MPW map status line window: ^[PY99:98^[\ +# SCP select status line: ^[[0;98v +# ED erase entire partition: ^[[2J +# SCP select main partition: ^[[v +# SM character insertion mode: ^[[4h +# RM character replacement mode: ^[[4l +# COO cursor on: ^[[r +# COO cursor off: ^[[1r +# SGR dim (turquoise) rev attr: ^[[2;7m +# SGR Data normal attr: ^[[m +# SO Line-graphic mode ON: ^N +# SI Line-graphic mode OFF: ^O +# MC start routing to printer: ^[[5i +# MC stop routing to printer: ^M^[[4i +# + +# This entry covers the following terminals: +# dku7102, tws2102, and tws models 2105 to 2112 +tws-generic|dku7102|Bull Questar tws terminals, + am, eslok, hs, mir, msgr, xenl, xhp@, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~, + bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J, + cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, + cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M, + dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K, + fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL, + il1=\E[L, ind=^J, invis=\E[0;8m, + is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\, + is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p, + is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, + ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027, + kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027, + kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H, + khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i, + mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O, + rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m, + rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N, + sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\, + smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g, + tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m, +tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA, + dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v, + use=tws-generic, +tws2103|xdku|BULL Questar tws2103, + ht=^I, use=tws-generic, +tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA, + ht=^I, + use=tws2102-sna, +dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6), + clear=\E[2J\E[H, cup@, dl@, dl1@, + dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m, + il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m, + use=tws-generic, +dku7202|BULL Questar 200 DKU7202 (colour/character attributes), + blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb, + smso=\E[0;4;5;7m, smul=\E[0;2m, + use=tws-generic, + +#=========================================================# +# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation # +#=========================================================# +# +# Description written by J. Staerck (BULL SA) +# Copyright (c) 1989 BULL SA +#--------------------------------------------------------------------------- +# This entry is used for terminals with vt320 emulation mode +# and following set-up : +# 8 bit ISO Latin Character Set (ISO 8859-1), +# 7 bit Control Characters, +# 80 columns screen. +# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300) +# They are used in string capabilities with vt220-320 emulation mode. +# In the following DEC definitions, two kinds of terminfo databases are +# provided : +# 1. the first with Command Sequence Introducer starting with escape +# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode. +# 2. the second with Command Sequence Introducer starting with escape +# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B. +# Soft Terminal Reset esc [ ! p +# RIS (erases screen): esc c +# DECKPNM numeric keypad mode: esc > +# DECKPAM applic. keypad mode: esc = +# DECSTBM Scrolling region: esc [ r +# SCS select G0 = US: esc ( B +# SCS select G1 = line-graphic: esc ) 0 +# Select 7-bit C1 controls: esc sp F +# Select 8-bit C1 controls: esc sp G +# Select cursor home: esc [ H +# Select erase screen: esc [ J +# SM KAM lock keyboard: esc [ 2 h +# RM KAM unlock keyboard: esc [ 2 l +# SM SRM local echo off: esc [ 1 2 h +# RM SRM local echo on: esc [ 1 2 l +# SM LNM New line : esc [ 2 0 h +# RM LNM return = CR only: esc [ 2 0 l +# SM DECCKM cursor keys mode: esc [ ? 1 h +# RM DECCKM appli. keys mode: esc [ ? 1 l +# SM DECANM ANSI mode on: esc [ ? 2 h +# RM DECANM ANSI mode off: esc [ ? 2 l +# SM DECCOLM 132-column screen: esc [ ? 3 h +# RM DECCOLM 80-column screen: esc [ ? 3 l +# SM DECSCLM Smooth scroll: esc [ ? 4 h +# RM DECSCLM Jump scroll: esc [ ? 4 l +# SM DECSCNM screen light backgr. esc [ ? 5 h +# RM DECSCNM screen dark backgr. esc [ ? 5 l +# SM DECOM move within margins: esc [ ? 6 h +# RM DECOM move outside margins: esc [ ? 6 l +# SM DECAWM auto right margin: esc [ ? 7 h +# RM DECAWM auto right margin: esc [ ? 7 l +# SM DECARM auto repeat: esc [ ? 8 h +# RM DECARM auto repeat: esc [ ? 8 l +# DECSASD Select active main: esc [ 0 $ } +# DECSASD Select active status: esc [ 1 $ } +# DECSSDT Select status none: esc [ 0 $ ~ +# DECSSDT Select status indic.: esc [ 1 $ ~ +# DECSSDT Select status host-wr: esc [ 2 $ ~ +# SM DECTCEM Visible cursor: esc [ ? 2 5 h +# RM DECTCEM Invisible cursor: esc [ ? 2 5 l +# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h +# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l +# SM DECNKM numeric keypad mode: esc [ ? 6 6 h +# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l +# SM DECKBUM clavier informatique esc [ ? 6 8 h +# RM DECKBUM clavier bureautique: esc [ ? 6 8 l +# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p +# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p +# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p +# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p +# Char. and Line attributes: esc [ Ps ... Ps m +# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse +# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off +# + +# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310 +bq300|Bull vt320 ISO Latin 1 80 columns terminal, + am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, + ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + is1=\E[63;1"p\E[2h, + is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, + is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy, + kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, + mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, + ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p, + rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[0m\E(B, smacs=^N, smam=\E[?7h, + smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, +bg300-rv|Bull vt320 reverse 80 columns, + flash=\E[?5l$<50>\E[?5h, + is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300, +bq300-w|Bull vt320 132 columns, + cols#132, wsl#132, + is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, + rs2=\E[?3h, + use=bq300, +bq300-w-rv|Bull vt320 reverse mode 132 columns, + cols#132, wsl#132, + flash=\E[?5l$<50>\E[?5h, + is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, + rs2=\E[?3h, + use=bq300, + +# This entry is used for terminals with vt320 emulation mode +# and following set-up : +# 8 bit ISO Latin Character Set (ISO 8859-1), +# 8 bit Control Characters, (CSI coded as x9B for ESC [) +# 80 columns screen. +# Soft Terminal Reset csi ! p +# RIS (erases screen): esc c +# DECKPNM numeric keypad mode: esc > +# DECKPAM applic. keypad mode: esc = +# DECSTBM Scrolling region: esc [ r +# SCS select G0 = US: esc ( B +# SCS select G1 = line-graphic: esc ) 0 +# Select 7-bit C1 controls: esc sp F +# Select 8-bit C1 controls: esc sp G +# Select cursor home: csi H +# Select erase screen: csi J +# SM KAM lock keyboard: csi 2 h +# RM KAM unlock keyboard: csi 2 l +# SM SRM local echo off: csi 1 2 h +# RM SRM local echo on: csi 1 2 l +# SM LNM New line : csi 2 0 h +# RM LNM return = CR only: csi 2 0 l +# SM DECCKM cursor keys mode: csi ? 1 h +# RM DECCKM appli. keys mode: csi ? 1 l +# SM DECANM ANSI mode on: csi ? 2 h +# RM DECANM ANSI mode off: csi ? 2 l +# SM DECCOLM 132-column screen: csi ? 3 h +# RM DECCOLM 80-column screen: csi ? 3 l +# SM DECSCLM Smooth scroll: csi ? 4 h +# RM DECSCLM Jump scroll: csi ? 4 l +# SM DECSCNM screen light backgr. csi ? 5 h +# RM DECSCNM screen dark backgr. csi ? 5 l +# SM DECOM move within margins: csi ? 6 h +# RM DECOM move outside margins: csi ? 6 l +# SM DECAWM auto right margin: csi ? 7 h +# RM DECAWM auto right margin: csi ? 7 l +# SM DECARM auto repeat: csi ? 8 h +# RM DECARM auto repeat: csi ? 8 l +# DECSASD Select active main: csi 0 $ } +# DECSASD Select active status: csi 1 $ } +# DECSSDT Select status none: csi 0 $ ~ +# DECSSDT Select status indic.: csi 1 $ ~ +# DECSSDT Select status host-wr: csi 2 $ ~ +# SM DECTCEM Visible cursor: csi ? 2 5 h +# RM DECTCEM Invisible cursor: csi ? 2 5 l +# SM DECNCRM 7 bits NCR set: csi ? 4 2 h +# RM DECNCRM Multi or ISO latin: csi ? 4 2 l +# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p +# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p +# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p +# Char. and Line attributes: csi Ps ... Ps m +# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse +# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off +# (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr) +bq300-8|Bull vt320 full 8 bits 80 columns, + am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l, + clear=\233H\233J, cnorm=\233?25h, cr=^M, + csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB, + cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, + cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P, + dl=\233%p1%dM, dsl=\2331$}\2332$~\n\2330$}, + ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, + enacs=\E(B\E)0, flash=\233?5h$<50>\233?5l, fsl=\2330$}, + home=\233H, ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, + ind=\ED, is1=\E[63;2"p\E[2h, + is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, + is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w, + ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s, + kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, + kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~, + kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, + kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, + kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~, + kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, + khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~, + krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, + lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, + rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h, + rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, + rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, + sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\2330m\E(B, smacs=^N, smam=\233?7h, + smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m, + smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~, +bq300-8rv|Bull vt320 8-bit reverse mode 80 columns, + flash=\233?5l$<50>\233?5h, + is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8, +bq300-8w|Bull vt320 8-bit 132 columns, + cols#132, wsl#132, + is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, + rs2=\233?3h, + use=bq300-8, +bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns, + cols#132, wsl#132, + flash=\233?5l$<50>\233?5h, + is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, + rs2=\233?3h, + use=bq300-8, + +# This entry is used for terminals with vt320 emulation mode +# a 102 keys keyboard (PC scancode !) and following set-up : +# 8 bit ISO Latin Character Set (ISO 8859-1), +# 7 bit Control Characters, +# 80 columns screen. +bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns, + kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, + kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@, + kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~, + kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, + kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, + use=bq300, +bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns, + flash=\E[?5l$<50>\E[?5h, + is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300-pc, +bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal, + cols#132, wsl#132, + is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, + rs2=\E[?3h, + use=bq300-pc, +bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns, + cols#132, wsl#132, + flash=\E[?5l$<50>\E[?5h, + is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, + rs2=\E[?3h, + use=bq300-pc, +# 8 bit ISO Latin Character Set (ISO 8859-1), +# 8 bit Control Characters, +# 80 columns screen. +bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns, + kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~, + kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@, + kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@, + kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, + kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@, + khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@, + kslt@, lf1@, lf2@, lf3@, lf4@, + use=bq300-8, +bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns, + flash=\E[?5l$<50>\E[?5h, + is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8-pc, +bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns, + cols#132, wsl#132, + is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, + rs2=\E[?3h, + use=bq300-8-pc, +bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns, + cols#132, wsl#132, + flash=\E[?5l$<50>\E[?5h, + is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, + rs2=\E[?3h, + use=bq300-8-pc, + +#======================================================# +# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation # +#======================================================# + +# normal mode, 8 bits, 80 columns terminal. +# RES reset : ^[e +# RIS reset initial state: ^[c +# BLE bell enable ^[h +# BLD bell disable ^[g +# CAMS char. attr. mode set ^[[D +# CAMR char. attr. mode reset ^[[G +# CLR clear ^[` +# KBU keyboard unlock (set) ^[[W +# KBL keyboard lock (reset) ^[[X +# CM character mode (async.) ^[k +# NEP non echoplex mode (by host) ^[l +# EP echoplex mode (by host) ^[m +# IM insert mode set ^[[I +# IM insert mode reset ^[[J +# RMS roll mode set ^[r +# RMR roll mode reset ^[q +# SM78 set mode vip7800 ^[[1q +# SD scroll up (72 lines) ^[[0s +# SD scroll down (72 lines) ^[[1s +# RBM block mode reset ^[[E +# SLS status line set ^[w +# SLR status line reset ^[v +# SLL status line lock ^[O +# LGS Line-graphic mode set ^[G +# LGR Line-graphic mode reset ^[F +# TBC tab clear (at cursor pos.) ^[[g +# TBI tab initialize ^[[N +# TBS tab set (at cursor pos.) ^[p +# PDS print data space ^[[0p +# PHD print host data ^[[3p +# PDT print data terminator ^[[<p +# PRES print adapter reset ^[[2p +# SSPR multi-part. reset ^[[<>u +# SSP0 partition 0 set ^[[00u +# SSP1 partition n format 1 ^[[PnPnSTRINGu +# SSP2 partition n format 2 ^[[PnPnSTRINGu +# SSP3 partition n format 3 ^[[PnPnu +# ATR attribute (visual) +# blink : ^[sB +# dim : ^[sL +# hide (blank) : ^[sH +# restore : ^[sR +# inverse video : ^[sI +# prot. : ^[sP +# underline : ^[s_ +# reset : ^{ +# +# This covers the vip7800 and BQ3155-vip7800 +vip|Bull Questar 3155-7800, + am, eslok, hs, km, mc5i, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, wsl#80, + acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB, + cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL, + dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK, + flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I, + hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH, + is2=\E[00u\E[<>001001024080024080u\E[01u, + is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H, + kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ, + kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@, + kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1, + kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?, + kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_, + kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER, + khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s, + kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1, + lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p, + mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI, + ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR, + rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG, + sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI, + smul=\Es_, tbc=\E[N, tsl=\Ew, +# normal screen, 8 bits, 132 columns terminal. +vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide, + cols#132, wsl#132, + is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip, +vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines, + lines#72, + is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip, +vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines, + cols#132, lines#72, wsl#132, + is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip, + #### Chromatics # @@ -16060,7 +16800,7 @@ ep48|ep4080|execuport 4080, bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J, ep40|ep4000|execuport 4000, cols#136, use=ep4080, -# Adam Thompson <thompson@xanth.magic.mb.ca> tells us: +# Adam Thompson <athompso@pangea.ca> tells us: # Informer series - these are all portable units, resembling older # automatic bread-baking machines. The terminal looks like a `clamshell' # design, but isn't. The structure is similar to the Direct terminals, @@ -16121,6 +16861,25 @@ teletec|Teletec Datascreen, # terminal from 1984/85. The function key definitions k0-k5 represent the # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN, # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys. +# +# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998: +# I had a couple of scopes (3221) like this once where I used to work, around +# the 1987 time frame if memory serves me correctly. These scopes were made +# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220 +# compatible. The 3220 was a plain text terminal like the VT-220, the 3221 +# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222 +# was like the VT-241 (color with Regis + Sixel Graphics). These terminals +# (3221) cost about $1500 each, and one was always broken -- had to be sent +# back to the shop for repairs. +# The only real advantage these scopes had over the VT-240's were: +# 1) They were faster in the Regis display, or at least the ones I did +# 2) They had a handy debugging feature where you could split-screen the +# scope, the graphics would appear on the top, and the REGIS commands would +# appear on the bottom. I don't remember the VT-240s being able to do that. +# I would swear that LANPAR Technologies was in MA someplace, but since I +# don't work at the same place anymore, and those terminals and manuals were +# long since junked, I cannot be any more sure than that. +# # (v3220: removed obsolete ":kn#10:", # I added <rmam>/<smam> based on the init string -- esr) v3220|LANPAR Vision II model 3220/3221/3222, @@ -17500,6 +18259,18 @@ v3220|LANPAR Vision II model 3220/3221/3222, # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove', # and adding kcbt -TD # +# 2000/1/12 +# * remove incorrect khome/kend from xterm-xf86-v333, which was based on +# nonstandard resource settings -TD +# +# 2000/2/26 +# * minor fixes for xterm-*, based on Debian #58530 -TD +# +# 2000/3/4 +# * add several terminal types from esr's "11.0", as well as comments. +# bg300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*, +# vt220-8bit, vt220-old, wy85-8bit +# # The following sets edit modes for GNU EMACS. # Local Variables: # fill-prefix:"\t" |