diff options
Diffstat (limited to 'sys/arch/moko/dev/moko_lcd.c')
| -rw-r--r-- | sys/arch/moko/dev/moko_lcd.c | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/sys/arch/moko/dev/moko_lcd.c b/sys/arch/moko/dev/moko_lcd.c new file mode 100644 index 00000000000..b4b4988a1ae --- /dev/null +++ b/sys/arch/moko/dev/moko_lcd.c @@ -0,0 +1,359 @@ +/* $OpenBSD: moko_lcd.c,v 1.1 2009/07/14 14:09:05 drahn Exp $ */ +/* $NetBSD: smdk2410_lcd.c,v 1.4 2008/06/11 23:24:43 cegger Exp $ */ + +/* + * Copyright (c) 2004 Genetec Corporation. All rights reserved. + * Written by Hiroyuki Bessho for Genetec Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of Genetec Corporation may not be used to endorse or + * promote products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * LCD driver for Samsung SMDK2410. + * + * Controlling LCD is almost completely done through S3C2410's + * integrated LCD controller. Codes for it is arm/s3c2xx0/s3c24x0_lcd.c. + * + * Codes in this file provide the platform's LCD panel information. + */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/conf.h> +#include <sys/event.h> +#include <sys/uio.h> +#include <sys/malloc.h> + +#include <dev/cons.h> +#include <dev/wscons/wsconsio.h> +#include <dev/wscons/wsdisplayvar.h> +#include <dev/wscons/wscons_callbacks.h> + +#include <machine/bus.h> +#include <arm/s3c2xx0/s3c24x0var.h> +#include <arm/s3c2xx0/s3c24x0reg.h> +#include <arm/s3c2xx0/s3c2410reg.h> +#include <arm/s3c2xx0/s3c24x0_lcd.h> + +#include "wsdisplay.h" + +int lcd_match(struct device *, void *, void *); +void lcd_attach(struct device *, struct device *, void *); + +#ifdef LCD_DEBUG +void draw_test_pattern(struct s3c24x0_lcd_softc *, + struct s3c24x0_lcd_screen *scr); +#endif + +#if NWSDISPLAY > 0 + +/* + * Screen geometries. + * + * S3C24x0's LCD controller can have virtual screens that are bigger + * than actual LCD panel. (XXX: wscons can't manage such screens for now) + */ +struct s3c24x0_wsscreen_descr lcd_bpp16_std = +{ + { + "std", + }, + 16 /* bits per pixel */ +}; + + +static const struct wsscreen_descr *lcd_scr_descr[] = { + &lcd_bpp16_std.c, +}; + +#define N_SCR_DESCR (sizeof lcd_scr_descr / sizeof lcd_scr_descr[0]) + +const struct wsscreen_list lcd_screen_list = { + N_SCR_DESCR, + lcd_scr_descr +}; + +void lcd_burner(void *v, u_int on, u_int flags); + +const struct wsdisplay_accessops lcd_accessops = { + s3c24x0_lcd_ioctl, + s3c24x0_lcd_mmap, + s3c24x0_lcd_alloc_screen, + s3c24x0_lcd_free_screen, + s3c24x0_lcd_show_screen, + NULL, /* load_font */ + NULL, /* scrollback */ + NULL, /* getchar */ + lcd_burner +}; + +#else /* NWSDISPLAY */ +/* + * Interface to LCD framebuffer without wscons + */ +extern struct cfdriver lcd_cd; + +dev_type_open(lcdopen); +dev_type_close(lcdclose); +dev_type_ioctl(lcdioctl); +dev_type_mmap(lcdmmap); +const struct cdevsw lcd_cdevsw = { + lcdopen, lcdclose, noread, nowrite, lcdioctl, + nostop, notty, nopoll, lcdmmap, nokqfilter, D_TTY +}; + +#endif /* NWSDISPLAY */ + +struct cfattach lcd_ssio_ca = { + sizeof (struct s3c24x0_lcd_softc), lcd_match, lcd_attach +}; + +struct cfdriver lcd_cd = { + NULL, "lcd", DV_DULL +}; + + + +int +lcd_match(struct device *parent, void *v, void *aux) +{ + struct s3c2xx0_attach_args *sa = aux; + extern uint32_t hardware_type; + + if ((hardware_type & 0xff00) != 0x0100) + return 0; /* NOT GTA01 */ + + if (sa->sa_addr == 0) + sa->sa_addr = S3C2410_LCDC_BASE; + + return 1; +} + +static struct s3c24x0_lcd_panel_info moko_glass = +{ + 480, /* Width */ + 640, /* Height */ + 66500000/2, /*XXX *//* pixel clock = 10MHz */ + +#define _(field, val) (((val)-1) << (field##_SHIFT)) + + LCDCON1_PNRMODE_TFT|LCDCON1_BPPMODE_TFT16, + + /* LCDCON2: vertical timings */ + /* _(LCDCON2_VBPD, 2) | + _(LCDCON2_VFPD, 3) | + _(LCDCON2_LINEVAL, 320) | + _(LCDCON2_VPSW, 2) */ 0x19fc3c1, + + /* LCDCON3: horizontal timings */ + /* _(LCDCON3_HBPD, 7) | + _(LCDCON3_HFPD, 3) */ 0x39df67, + + /* LCDCON4: horizontaol pulse width */ + _(LCDCON4_HPSW, 8), + + /* LCDCON5: signal polarities */ + LCDCON5_FRM565 | LCDCON5_INVVCLK| LCDCON5_INVVLINE | LCDCON5_INVVFRAME | + LCDCON5_PWREN | LCDCON5_HWSWP, + + /* LPCSEL register */ + LPCSEL_MODE_SEL, +#undef _ +}; + +void +lcd_attach(struct device *parent, struct device *self, void *aux) +{ + struct s3c24x0_lcd_softc *sc = (struct s3c24x0_lcd_softc *)self; + bus_space_tag_t iot = s3c2xx0_softc->sc_iot; + bus_space_handle_t gpio_ioh = s3c2xx0_softc->sc_gpio_ioh; +#if NWSDISPLAY > 0 + struct wsemuldisplaydev_attach_args aa; +#else + struct s3c24x0_lcd_screen *screen; +#endif + + + printf( "\n" ); + + /* setup GPIO ports for LCD */ + /* XXX: some LCD panels may not need all VD signals */ + gpio_ioh = s3c2xx0_softc->sc_gpio_ioh; + bus_space_write_4(iot, gpio_ioh, GPIO_PCUP, ~0); + bus_space_write_4(iot, gpio_ioh, GPIO_PCCON, 0xaaaaaaaa); + bus_space_write_4(iot, gpio_ioh, GPIO_PDUP, ~0); + bus_space_write_4(iot, gpio_ioh, GPIO_PDCON, 0xaaaaaaaa); + + s3c24x0_lcd_attach_sub(sc, aux, &moko_glass); + +#if NWSDISPLAY > 0 + + aa.console = 0; + aa.scrdata = &lcd_screen_list; + aa.accessops = &lcd_accessops; + aa.accesscookie = sc; + aa.defaultscreens = 0; /* default */ + + + (void) config_found(self, &aa, wsemuldisplaydevprint); +#else + + screen = s3c24x0_lcd_new_screen(sc, 240, 320, 16); + + if( screen ){ + sc->active = screen; + s3c24x0_lcd_start_dma(sc, screen); + s3c24x0_lcd_power(sc, 1); + } +#endif /* NWSDISPLAY */ + +} + +#if NWSDISPLAY == 0 + +int +lcdopen( dev_t dev, int oflags, int devtype, struct proc *p ) +{ + return 0; +} + +int +lcdclose( dev_t dev, int fflag, int devtype, struct proc *p ) +{ + return 0; +} + +paddr_t +lcdmmap( dev_t dev, off_t offset, int size ) +{ + struct s3c24x0_lcd_softc *sc = + device_lookup_private(&lcd_cd, minor(dev)); + struct s3c24x0_lcd_screen *scr = sc->active; + + return bus_dmamem_mmap(sc->dma_tag, scr->segs, scr->nsegs, + offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT); +} + +int +lcdioctl( dev_t dev, u_long cmd, void *data, + int fflag, struct lwp *l ) +{ + return EOPNOTSUPP; +} + +#endif /* NWSDISPLAY>0 */ + +void +lcd_burner(void *v, u_int on, u_int flags) +{ + + #if 0 + lcd_set_brightness(on ? lcd_get_brightness() : 0); + #endif +} + + +#ifdef LCD_DEBUG +static void +draw_test_pattern_16(struct s3c24x0_lcd_softc *sc, + struct s3c24x0_lcd_screen *scr) +{ + int x, y; + uint16_t color, *line; + char *buf = (char *)(scr->buf_va); + +#define rgb(r,g,b) (((r)<<11) | ((g)<<5) | (b)) + + for (y=0; y < sc->panel_info->panel_height; ++y) { + line = (uint16_t *)(buf + scr->stride * y); + + for (x=0; x < sc->panel_info->panel_width; ++x) { + switch (((x/30) + (y/10)) % 8) { + default: + case 0: color = rgb(0x00, 0x00, 0x00); break; + case 1: color = rgb(0x00, 0x00, 0x1f); break; + case 2: color = rgb(0x00, 0x3f, 0x00); break; + case 3: color = rgb(0x00, 0x3f, 0x1f); break; + case 4: color = rgb(0x1f, 0x00, 0x00); break; + case 5: color = rgb(0x1f, 0x00, 0x1f); break; + case 6: color = rgb(0x1f, 0x3f, 0x00); break; + case 7: color = rgb(0x1f, 0x3f, 0x1f); break; + } + + line[x] = color; + } + } + + for (x=0; x < MIN(sc->panel_info->panel_height, + sc->panel_info->panel_width); ++x) { + + line = (uint16_t *)(buf + scr->stride * x); + line[x] = rgb(0x1f, 0x3f, 0x1f); + } +} + +static void +draw_test_pattern_8(struct s3c24x0_lcd_softc *sc, + struct s3c24x0_lcd_screen *scr) +{ + int x, y; + uint8_t *line; + char *buf = (char *)(scr->buf_va); + + + for (y=0; y < sc->panel_info->panel_height; ++y) { + line = (uint8_t *)(buf + scr->stride * y); + + for (x=0; x < sc->panel_info->panel_width; ++x) { + line[x] = (((x/15) + (y/20)) % 16); + } + } + + for (x=0; x < MIN(sc->panel_info->panel_height, + sc->panel_info->panel_width); ++x) { + + line = (uint8_t *)(buf + scr->stride * x); + line[x] = 7; + } +} + + +void +draw_test_pattern(struct s3c24x0_lcd_softc *sc, struct s3c24x0_lcd_screen *scr) +{ + switch (scr->depth) { + case 16: + draw_test_pattern_16(sc, scr); + break; + case 8: + draw_test_pattern_8(sc, scr); + break; + } +} + + +#endif /* LCD_DEBUG */ + |