diff options
Diffstat (limited to 'sys/dev')
| -rw-r--r-- | sys/dev/ic/atw.c | 4 | ||||
| -rw-r--r-- | sys/dev/ic/atwreg.h | 445 | ||||
| -rw-r--r-- | sys/dev/ic/atwvar.h | 12 | ||||
| -rw-r--r-- | sys/dev/ic/rf3000reg.h | 50 | ||||
| -rw-r--r-- | sys/dev/ic/si4136reg.h | 26 |
5 files changed, 266 insertions, 271 deletions
diff --git a/sys/dev/ic/atw.c b/sys/dev/ic/atw.c index b41deed340e..8eed8498ac4 100644 --- a/sys/dev/ic/atw.c +++ b/sys/dev/ic/atw.c @@ -1,4 +1,4 @@ -/* $OpenBSD: atw.c,v 1.68 2009/08/16 17:24:04 jsg Exp $ */ +/* $OpenBSD: atw.c,v 1.69 2009/08/16 18:03:48 jsg Exp $ */ /* $NetBSD: atw.c,v 1.69 2004/07/23 07:07:55 dyoung Exp $ */ /*- @@ -1960,7 +1960,7 @@ atw_si4126_write(struct atw_softc *sc, u_int addr, u_int val) ATW_WRITE(sc, ATW_SYNRF, reg | ATW_SYNRF_LEIF); ATW_WRITE(sc, ATW_SYNRF, reg); - for (mask = BIT(nbits - 1); mask != 0; mask >>= 1) { + for (mask = (1 << (nbits - 1)); mask != 0; mask >>= 1) { if ((bits & mask) != 0) reg |= ATW_SYNRF_SYNDATA; else diff --git a/sys/dev/ic/atwreg.h b/sys/dev/ic/atwreg.h index 3ab0366c96e..fcca5b2d346 100644 --- a/sys/dev/ic/atwreg.h +++ b/sys/dev/ic/atwreg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: atwreg.h,v 1.6 2009/08/16 17:24:04 jsg Exp $ */ +/* $OpenBSD: atwreg.h,v 1.7 2009/08/16 18:03:48 jsg Exp $ */ /* $NetBSD: atwreg.h,v 1.10 2004/07/23 05:01:29 dyoung Exp $ */ /* @@ -45,11 +45,6 @@ #ifndef _BIT_TWIDDLE #define _BIT_TWIDDLE -/* nth bit, BIT(0) == 0x1. */ -#define BIT(n) (((n) == 32) ? 0 : ((u_int32_t) 1 << (n))) - -/* bits m through n, m < n. */ -#define BITS(m, n) ((BIT(MAX((m), (n)) + 1) - 1) ^ (BIT(MIN((m), (n))) - 1)) /* find least significant bit that is set */ #define LOWEST_SET_BIT(x) ((((x) - 1) & (x)) ^ (x)) @@ -175,11 +170,11 @@ #define ATW_FFER 0x10C /* Function force event */ -#define ATW_PAR_MWIE BIT(24) /* memory write and invalidate +#define ATW_PAR_MWIE (1<<24) /* memory write and invalidate * enable */ -#define ATW_PAR_MRLE BIT(23) /* memory read line enable */ -#define ATW_PAR_MRME BIT(21) /* memory read multiple +#define ATW_PAR_MRLE (1<<23) /* memory read line enable */ +#define ATW_PAR_MRME (1<<21) /* memory read multiple * enable */ #define ATW_PAR_RAP_MASK 0x60000 /* receive auto-polling in @@ -201,113 +196,113 @@ #define ATW_PAR_PBL_8DW LSHIFT(0x8, ATW_PAR_PBL_MASK) #define ATW_PAR_PBL_16DW LSHIFT(0x16, ATW_PAR_PBL_MASK) #define ATW_PAR_PBL_32DW LSHIFT(0x32, ATW_PAR_PBL_MASK) -#define ATW_PAR_BLE BIT(7) /* big/little endian selection */ +#define ATW_PAR_BLE (1<<7) /* big/little endian selection */ #define ATW_PAR_DSL_MASK 0x7c /* descriptor skip length */ -#define ATW_PAR_BAR BIT(1) /* bus arbitration */ -#define ATW_PAR_SWR BIT(0) /* software reset */ +#define ATW_PAR_BAR (1<<1) /* bus arbitration */ +#define ATW_PAR_SWR (1<<0) /* software reset */ -#define ATW_FRCTL_PWRMGMT BIT(31) /* power management */ +#define ATW_FRCTL_PWRMGMT (1<<31) /* power management */ #define ATW_FRCTL_VER_MASK 0x60000000 /* protocol version */ -#define ATW_FRCTL_ORDER BIT(28) /* order bit */ -#define ATW_FRCTL_MAXPSP BIT(27) /* maximum power saving */ -#define ATW_C_FRCTL_PRSP BIT(26) /* 1: driver sends probe +#define ATW_FRCTL_ORDER (1<<28) /* order bit */ +#define ATW_FRCTL_MAXPSP (1<<27) /* maximum power saving */ +#define ATW_C_FRCTL_PRSP (1<<26) /* 1: driver sends probe * response * 0: ASIC sends prresp */ -#define ATW_C_FRCTL_DRVBCON BIT(25) /* 1: driver sends beacons +#define ATW_C_FRCTL_DRVBCON (1<<25) /* 1: driver sends beacons * 0: ASIC sends beacons */ -#define ATW_C_FRCTL_DRVLINKCTRL BIT(24) /* 1: driver controls link LED +#define ATW_C_FRCTL_DRVLINKCTRL (1<<24) /* 1: driver controls link LED * 0: ASIC controls link LED */ -#define ATW_C_FRCTL_DRVLINKON BIT(23) /* 1: turn on link LED +#define ATW_C_FRCTL_DRVLINKON (1<<23) /* 1: turn on link LED * 0: turn off link LED */ -#define ATW_C_FRCTL_CTX_DATA BIT(22) /* 0: set by CSR28 +#define ATW_C_FRCTL_CTX_DATA (1<<22) /* 0: set by CSR28 * 1: random */ -#define ATW_C_FRCTL_RSVFRM BIT(21) /* 1: receive "reserved" +#define ATW_C_FRCTL_RSVFRM (1<<21) /* 1: receive "reserved" * frames, 0: ignore * reserved frames */ -#define ATW_C_FRCTL_CFEND BIT(19) /* write to send CF_END, +#define ATW_C_FRCTL_CFEND (1<<19) /* write to send CF_END, * ADM8211C/CR clears */ -#define ATW_FRCTL_DOZEFRM BIT(18) /* select pre-sleep frame */ -#define ATW_FRCTL_PSAWAKE BIT(17) /* MAC is awake (?) */ -#define ATW_FRCTL_PSMODE BIT(16) /* MAC is power-saving (?) */ +#define ATW_FRCTL_DOZEFRM (1<<18) /* select pre-sleep frame */ +#define ATW_FRCTL_PSAWAKE (1<<17) /* MAC is awake (?) */ +#define ATW_FRCTL_PSMODE (1<<16) /* MAC is power-saving (?) */ #define ATW_FRCTL_AID_MASK 0xffff /* STA Association ID */ -#define ATW_INTR_PCF BIT(31) /* started/ended CFP */ -#define ATW_INTR_BCNTC BIT(30) /* transmitted IBSS beacon */ -#define ATW_INTR_GPINT BIT(29) /* GPIO interrupt */ -#define ATW_INTR_LINKOFF BIT(28) /* lost ATW_WCSR_BLN beacons */ -#define ATW_INTR_ATIMTC BIT(27) /* transmitted ATIM */ -#define ATW_INTR_TSFTF BIT(26) /* TSFT out of range */ -#define ATW_INTR_TSCZ BIT(25) /* TSC countdown expired */ -#define ATW_INTR_LINKON BIT(24) /* matched SSID, BSSID */ -#define ATW_INTR_SQL BIT(23) /* Marvel signal quality */ -#define ATW_INTR_WEPTD BIT(22) /* switched WEP table */ -#define ATW_INTR_ATIME BIT(21) /* ended ATIM window */ -#define ATW_INTR_TBTT BIT(20) /* (TBTT) Target Beacon TX Time +#define ATW_INTR_PCF (1<<31) /* started/ended CFP */ +#define ATW_INTR_BCNTC (1<<30) /* transmitted IBSS beacon */ +#define ATW_INTR_GPINT (1<<29) /* GPIO interrupt */ +#define ATW_INTR_LINKOFF (1<<28) /* lost ATW_WCSR_BLN beacons */ +#define ATW_INTR_ATIMTC (1<<27) /* transmitted ATIM */ +#define ATW_INTR_TSFTF (1<<26) /* TSFT out of range */ +#define ATW_INTR_TSCZ (1<<25) /* TSC countdown expired */ +#define ATW_INTR_LINKON (1<<24) /* matched SSID, BSSID */ +#define ATW_INTR_SQL (1<<23) /* Marvel signal quality */ +#define ATW_INTR_WEPTD (1<<22) /* switched WEP table */ +#define ATW_INTR_ATIME (1<<21) /* ended ATIM window */ +#define ATW_INTR_TBTT (1<<20) /* (TBTT) Target Beacon TX Time * passed */ -#define ATW_INTR_NISS BIT(16) /* normal interrupt status +#define ATW_INTR_NISS (1<<16) /* normal interrupt status * summary: any of 31, 30, 27, * 24, 14, 12, 6, 2, 0. */ -#define ATW_INTR_AISS BIT(15) /* abnormal interrupt status +#define ATW_INTR_AISS (1<<15) /* abnormal interrupt status * summary: any of 29, 28, 26, * 25, 23, 22, 13, 11, 8, 7, 5, * 4, 3, 1. */ -#define ATW_INTR_TEIS BIT(14) /* transmit early interrupt +#define ATW_INTR_TEIS (1<<14) /* transmit early interrupt * status: moved TX packet to * FIFO */ -#define ATW_INTR_FBE BIT(13) /* fatal bus error */ -#define ATW_INTR_REIS BIT(12) /* receive early interrupt +#define ATW_INTR_FBE (1<<13) /* fatal bus error */ +#define ATW_INTR_REIS (1<<12) /* receive early interrupt * status: RX packet filled * its first descriptor */ -#define ATW_INTR_GPTT BIT(11) /* general purpose timer expired */ -#define ATW_INTR_RPS BIT(8) /* stopped receive process */ -#define ATW_INTR_RDU BIT(7) /* receive descriptor +#define ATW_INTR_GPTT (1<<11) /* general purpose timer expired */ +#define ATW_INTR_RPS (1<<8) /* stopped receive process */ +#define ATW_INTR_RDU (1<<7) /* receive descriptor * unavailable */ -#define ATW_INTR_RCI BIT(6) /* completed packet reception */ -#define ATW_INTR_TUF BIT(5) /* transmit underflow */ -#define ATW_INTR_TRT BIT(4) /* transmit retry count +#define ATW_INTR_RCI (1<<6) /* completed packet reception */ +#define ATW_INTR_TUF (1<<5) /* transmit underflow */ +#define ATW_INTR_TRT (1<<4) /* transmit retry count * expired */ -#define ATW_INTR_TLT BIT(3) /* transmit lifetime exceeded */ -#define ATW_INTR_TDU BIT(2) /* transmit descriptor +#define ATW_INTR_TLT (1<<3) /* transmit lifetime exceeded */ +#define ATW_INTR_TDU (1<<2) /* transmit descriptor * unavailable */ -#define ATW_INTR_TPS BIT(1) /* stopped transmit process */ -#define ATW_INTR_TCI BIT(0) /* completed transmit */ -#define ATW_NAR_TXCF BIT(31) /* stop process on TX failure */ -#define ATW_NAR_HF BIT(30) /* flush TX FIFO to host (?) */ -#define ATW_NAR_UTR BIT(29) /* select retry count source */ -#define ATW_NAR_PCF BIT(28) /* use one/both transmit +#define ATW_INTR_TPS (1<<1) /* stopped transmit process */ +#define ATW_INTR_TCI (1<<0) /* completed transmit */ +#define ATW_NAR_TXCF (1<<31) /* stop process on TX failure */ +#define ATW_NAR_HF (1<<30) /* flush TX FIFO to host (?) */ +#define ATW_NAR_UTR (1<<29) /* select retry count source */ +#define ATW_NAR_PCF (1<<28) /* use one/both transmit * descriptor base addresses */ -#define ATW_NAR_CFP BIT(27) /* indicate more TX data to +#define ATW_NAR_CFP (1<<27) /* indicate more TX data to * point coordinator */ -#define ATW_C_NAR_APSTA BIT(26) /* 0: STA mode +#define ATW_C_NAR_APSTA (1<<26) /* 0: STA mode * 1: AP mode */ -#define ATW_C_NAR_TDBBE BIT(25) /* 0: disable TDBB +#define ATW_C_NAR_TDBBE (1<<25) /* 0: disable TDBB * 1: enable TDBB */ -#define ATW_C_NAR_TDBHE BIT(24) /* 0: disable TDBH +#define ATW_C_NAR_TDBHE (1<<24) /* 0: disable TDBH * 1: enable TDBH */ -#define ATW_C_NAR_TDBHT BIT(23) /* write 1 to make ASIC +#define ATW_C_NAR_TDBHT (1<<23) /* write 1 to make ASIC * poll TDBH once; ASIC clears */ -#define ATW_NAR_SF BIT(21) /* store and forward: ignore +#define ATW_NAR_SF (1<<21) /* store and forward: ignore * TX threshold */ #define ATW_NAR_TR_MASK 0xc000 /* TX threshold */ @@ -317,62 +312,62 @@ #define ATW_NAR_TR_H96 LSHIFT(0x0, ATW_NAR_TR_MASK) #define ATW_NAR_TR_H288 LSHIFT(0x2, ATW_NAR_TR_MASK) #define ATW_NAR_TR_H544 LSHIFT(0x3, ATW_NAR_TR_MASK) -#define ATW_NAR_ST BIT(13) /* start/stop transmit */ +#define ATW_NAR_ST (1<<13) /* start/stop transmit */ #define ATW_NAR_OM_MASK 0xc00 /* operating mode */ #define ATW_NAR_OM_NORMAL 0x0 #define ATW_NAR_OM_LOOPBACK LSHIFT(0x1, ATW_NAR_OM_MASK) -#define ATW_NAR_MM BIT(7) /* RX any multicast */ -#define ATW_NAR_PR BIT(6) /* promiscuous mode */ -#define ATW_NAR_EA BIT(5) /* match ad hoc packets (?) */ -#define ATW_NAR_DISPCF BIT(4) /* 1: PCF *not* supported +#define ATW_NAR_MM (1<<7) /* RX any multicast */ +#define ATW_NAR_PR (1<<6) /* promiscuous mode */ +#define ATW_NAR_EA (1<<5) /* match ad hoc packets (?) */ +#define ATW_NAR_DISPCF (1<<4) /* 1: PCF *not* supported * 0: PCF supported */ -#define ATW_NAR_PB BIT(3) /* pass bad packets */ -#define ATW_NAR_STPDMA BIT(2) /* stop DMA, abort packet */ -#define ATW_NAR_SR BIT(1) /* start/stop receive */ -#define ATW_NAR_CTX BIT(0) /* continuous TX mode */ +#define ATW_NAR_PB (1<<3) /* pass bad packets */ +#define ATW_NAR_STPDMA (1<<2) /* stop DMA, abort packet */ +#define ATW_NAR_SR (1<<1) /* start/stop receive */ +#define ATW_NAR_CTX (1<<0) /* continuous TX mode */ /* IER bits are identical to STSR bits. Use ATW_INTR_*. */ #if 0 -#define ATW_IER_NIE BIT(16) /* normal interrupt enable */ -#define ATW_IER_AIE BIT(15) /* abnormal interrupt enable */ +#define ATW_IER_NIE (1<<16) /* normal interrupt enable */ +#define ATW_IER_AIE (1<<15) /* abnormal interrupt enable */ /* normal interrupts: combine with ATW_IER_NIE */ -#define ATW_IER_PCFIE BIT(31) /* STA entered CFP */ -#define ATW_IER_BCNTCIE BIT(30) /* STA TX'd beacon */ -#define ATW_IER_ATIMTCIE BIT(27) /* transmitted ATIM */ -#define ATW_IER_LINKONIE BIT(24) /* matched beacon */ -#define ATW_IER_ATIMIE BIT(21) /* ended ATIM window */ -#define ATW_IER_TBTTIE BIT(20) /* TBTT */ -#define ATW_IER_TEIE BIT(14) /* moved TX packet to FIFO */ -#define ATW_IER_REIE BIT(12) /* RX packet filled its first +#define ATW_IER_PCFIE (1<<31) /* STA entered CFP */ +#define ATW_IER_BCNTCIE (1<<30) /* STA TX'd beacon */ +#define ATW_IER_ATIMTCIE (1<<27) /* transmitted ATIM */ +#define ATW_IER_LINKONIE (1<<24) /* matched beacon */ +#define ATW_IER_ATIMIE (1<<21) /* ended ATIM window */ +#define ATW_IER_TBTTIE (1<<20) /* TBTT */ +#define ATW_IER_TEIE (1<<14) /* moved TX packet to FIFO */ +#define ATW_IER_REIE (1<<12) /* RX packet filled its first * descriptor */ -#define ATW_IER_RCIE BIT(6) /* completed RX */ -#define ATW_IER_TDUIE BIT(2) /* transmit descriptor +#define ATW_IER_RCIE (1<<6) /* completed RX */ +#define ATW_IER_TDUIE (1<<2) /* transmit descriptor * unavailable */ -#define ATW_IER_TCIE BIT(0) /* completed TX */ +#define ATW_IER_TCIE (1<<0) /* completed TX */ /* abnormal interrupts: combine with ATW_IER_AIE */ -#define ATW_IER_GPIE BIT(29) /* GPIO interrupt */ -#define ATW_IER_LINKOFFIE BIT(28) /* lost beacon */ -#define ATW_IER_TSFTFIE BIT(26) /* TSFT out of range */ -#define ATW_IER_TSCIE BIT(25) /* TSC countdown expired */ -#define ATW_IER_SQLIE BIT(23) /* signal quality */ -#define ATW_IER_WEPIE BIT(22) /* finished WEP table switch */ -#define ATW_IER_FBEIE BIT(13) /* fatal bus error */ -#define ATW_IER_GPTIE BIT(11) /* general purpose timer expired */ -#define ATW_IER_RPSIE BIT(8) /* stopped receive process */ -#define ATW_IER_RUIE BIT(7) /* receive descriptor unavailable */ -#define ATW_IER_TUIE BIT(5) /* transmit underflow */ -#define ATW_IER_TRTIE BIT(4) /* exceeded transmit retry count */ -#define ATW_IER_TLTTIE BIT(3) /* transmit lifetime exceeded */ -#define ATW_IER_TPSIE BIT(1) /* stopped transmit process */ +#define ATW_IER_GPIE (1<<29) /* GPIO interrupt */ +#define ATW_IER_LINKOFFIE (1<<28) /* lost beacon */ +#define ATW_IER_TSFTFIE (1<<26) /* TSFT out of range */ +#define ATW_IER_TSCIE (1<<25) /* TSC countdown expired */ +#define ATW_IER_SQLIE (1<<23) /* signal quality */ +#define ATW_IER_WEPIE (1<<22) /* finished WEP table switch */ +#define ATW_IER_FBEIE (1<<13) /* fatal bus error */ +#define ATW_IER_GPTIE (1<<11) /* general purpose timer expired */ +#define ATW_IER_RPSIE (1<<8) /* stopped receive process */ +#define ATW_IER_RUIE (1<<7) /* receive descriptor unavailable */ +#define ATW_IER_TUIE (1<<5) /* transmit underflow */ +#define ATW_IER_TRTIE (1<<4) /* exceeded transmit retry count */ +#define ATW_IER_TLTTIE (1<<3) /* transmit lifetime exceeded */ +#define ATW_IER_TPSIE (1<<1) /* stopped transmit process */ #endif -#define ATW_LPC_LPCO BIT(16) /* lost packet counter overflow */ +#define ATW_LPC_LPCO (1<<16) /* lost packet counter overflow */ #define ATW_LPC_LPC_MASK 0xffff /* lost packet counter */ -#define ATW_TEST1_CONTROL BIT(31) /* "0: read from dxfer_control, +#define ATW_TEST1_CONTROL (1<<31) /* "0: read from dxfer_control, * 1: read from dxfer_state" */ #define ATW_TEST1_DBGREAD_MASK 0x70000000 /* "control of read data, @@ -398,11 +393,11 @@ * from dxfer (huh?) */ -#define ATW_SPR_SRS BIT(11) /* activate SEEPROM access */ -#define ATW_SPR_SDO BIT(3) /* data out of SEEPROM */ -#define ATW_SPR_SDI BIT(2) /* data into SEEPROM */ -#define ATW_SPR_SCLK BIT(1) /* SEEPROM clock */ -#define ATW_SPR_SCS BIT(0) /* SEEPROM chip select */ +#define ATW_SPR_SRS (1<<11) /* activate SEEPROM access */ +#define ATW_SPR_SDO (1<<3) /* data out of SEEPROM */ +#define ATW_SPR_SDI (1<<2) /* data into SEEPROM */ +#define ATW_SPR_SCLK (1<<1) /* SEEPROM clock */ +#define ATW_SPR_SCS (1<<0) /* SEEPROM chip select */ #define ATW_TEST0_BE_MASK 0xe0000000 /* Bus error state */ #define ATW_TEST0_TS_MASK 0x1c000000 /* Transmit process state */ @@ -451,44 +446,44 @@ /* Running - queue current frame from FIFO into buffer */ #define ATW_TEST0_RS_QUEUE LSHIFT(7, ATW_TEST0_RS_MASK) -#define ATW_TEST0_EPNE BIT(18) /* SEEPROM not detected */ -#define ATW_TEST0_EPSNM BIT(17) /* SEEPROM bad signature */ -#define ATW_TEST0_EPTYP_MASK BIT(16) /* SEEPROM type +#define ATW_TEST0_EPNE (1<<18) /* SEEPROM not detected */ +#define ATW_TEST0_EPSNM (1<<17) /* SEEPROM bad signature */ +#define ATW_TEST0_EPTYP_MASK (1<<16) /* SEEPROM type * 1: 93c66, * 0: 93c46 */ #define ATW_TEST0_EPTYP_93c66 ATW_TEST0_EPTYP_MASK #define ATW_TEST0_EPTYP_93c46 0 -#define ATW_TEST0_EPRLD BIT(15) /* recall SEEPROM (write 1) */ - -#define ATW_WCSR_CRCT BIT(30) /* CRC-16 type */ -#define ATW_WCSR_WP1E BIT(29) /* match wake-up pattern 1 */ -#define ATW_WCSR_WP2E BIT(28) /* match wake-up pattern 2 */ -#define ATW_WCSR_WP3E BIT(27) /* match wake-up pattern 3 */ -#define ATW_WCSR_WP4E BIT(26) /* match wake-up pattern 4 */ -#define ATW_WCSR_WP5E BIT(25) /* match wake-up pattern 5 */ +#define ATW_TEST0_EPRLD (1<<15) /* recall SEEPROM (write 1) */ + +#define ATW_WCSR_CRCT (1<<30) /* CRC-16 type */ +#define ATW_WCSR_WP1E (1<<29) /* match wake-up pattern 1 */ +#define ATW_WCSR_WP2E (1<<28) /* match wake-up pattern 2 */ +#define ATW_WCSR_WP3E (1<<27) /* match wake-up pattern 3 */ +#define ATW_WCSR_WP4E (1<<26) /* match wake-up pattern 4 */ +#define ATW_WCSR_WP5E (1<<25) /* match wake-up pattern 5 */ #define ATW_WCSR_BLN_MASK 0xe00000 /* lose link after BLN lost * beacons */ -#define ATW_WCSR_TSFTWE BIT(20) /* wake up on TSFT out of +#define ATW_WCSR_TSFTWE (1<<20) /* wake up on TSFT out of * range */ -#define ATW_WCSR_TIMWE BIT(19) /* wake up on TIM */ -#define ATW_WCSR_ATIMWE BIT(18) /* wake up on ATIM */ -#define ATW_WCSR_KEYWE BIT(17) /* wake up on key update */ -#define ATW_WCSR_WFRE BIT(10) /* wake up on wake-up frame */ -#define ATW_WCSR_MPRE BIT(9) /* wake up on magic packet */ -#define ATW_WCSR_LSOE BIT(8) /* wake up on link loss */ +#define ATW_WCSR_TIMWE (1<<19) /* wake up on TIM */ +#define ATW_WCSR_ATIMWE (1<<18) /* wake up on ATIM */ +#define ATW_WCSR_KEYWE (1<<17) /* wake up on key update */ +#define ATW_WCSR_WFRE (1<<10) /* wake up on wake-up frame */ +#define ATW_WCSR_MPRE (1<<9) /* wake up on magic packet */ +#define ATW_WCSR_LSOE (1<<8) /* wake up on link loss */ /* wake-up reasons correspond to enable bits */ -#define ATW_WCSR_KEYUP BIT(6) /* */ -#define ATW_WCSR_TSFTW BIT(5) /* */ -#define ATW_WCSR_TIMW BIT(4) /* */ -#define ATW_WCSR_ATIMW BIT(3) /* */ -#define ATW_WCSR_WFR BIT(2) /* */ -#define ATW_WCSR_MPR BIT(1) /* */ -#define ATW_WCSR_LSO BIT(0) /* */ - -#define ATW_GPTMR_COM_MASK BIT(16) /* continuous operation mode */ +#define ATW_WCSR_KEYUP (1<<6) /* */ +#define ATW_WCSR_TSFTW (1<<5) /* */ +#define ATW_WCSR_TIMW (1<<4) /* */ +#define ATW_WCSR_ATIMW (1<<3) /* */ +#define ATW_WCSR_WFR (1<<2) /* */ +#define ATW_WCSR_MPR (1<<1) /* */ +#define ATW_WCSR_LSO (1<<0) /* */ + +#define ATW_GPTMR_COM_MASK (1<<16) /* continuous operation mode */ #define ATW_GPTMR_GTV_MASK 0xffff /* set countdown in 204us ticks */ #define ATW_GPIO_EC1_MASK 0x3000000 /* GPIO1 event configuration */ @@ -498,38 +493,38 @@ #define ATW_GPIO_O_MASK 0xfc0 /* output value */ #define ATW_GPIO_I_MASK 0x3f /* pin static input */ -#define ATW_BBPCTL_TWI BIT(31) /* Intersil 3-wire interface */ +#define ATW_BBPCTL_TWI (1<<31) /* Intersil 3-wire interface */ #define ATW_BBPCTL_RF3KADDR_MASK 0x7f000000 /* Address for RF3000 */ #define ATW_BBPCTL_RF3KADDR_ADDR LSHIFT(0x20, ATW_BBPCTL_RF3KADDR_MASK) -#define ATW_BBPCTL_NEGEDGE_DO BIT(23) /* data-out on negative edge */ -#define ATW_BBPCTL_NEGEDGE_DI BIT(22) /* data-in on negative edge */ -#define ATW_BBPCTL_CCA_ACTLO BIT(21) /* CCA low when busy */ +#define ATW_BBPCTL_NEGEDGE_DO (1<<23) /* data-out on negative edge */ +#define ATW_BBPCTL_NEGEDGE_DI (1<<22) /* data-in on negative edge */ +#define ATW_BBPCTL_CCA_ACTLO (1<<21) /* CCA low when busy */ #define ATW_BBPCTL_TYPE_MASK 0x1c0000 /* BBP type */ -#define ATW_BBPCTL_WR BIT(17) /* start write; reset on +#define ATW_BBPCTL_WR (1<<17) /* start write; reset on * completion */ -#define ATW_BBPCTL_RD BIT(16) /* start read; reset on +#define ATW_BBPCTL_RD (1<<16) /* start read; reset on * completion */ #define ATW_BBPCTL_ADDR_MASK 0xff00 /* BBP address */ #define ATW_BBPCTL_DATA_MASK 0xff /* BBP data */ -#define ATW_SYNCTL_WR BIT(31) /* start write; reset on +#define ATW_SYNCTL_WR (1<<31) /* start write; reset on * completion */ -#define ATW_SYNCTL_RD BIT(30) /* start read; reset on +#define ATW_SYNCTL_RD (1<<30) /* start read; reset on * completion */ -#define ATW_SYNCTL_CS0 BIT(29) /* chip select */ -#define ATW_SYNCTL_CS1 BIT(28) -#define ATW_SYNCTL_CAL BIT(27) /* generate RF CAL pulse after +#define ATW_SYNCTL_CS0 (1<<29) /* chip select */ +#define ATW_SYNCTL_CS1 (1<<28) +#define ATW_SYNCTL_CAL (1<<27) /* generate RF CAL pulse after * Rx */ -#define ATW_SYNCTL_SELCAL BIT(26) /* RF CAL source, 0: CAL bit, +#define ATW_SYNCTL_SELCAL (1<<26) /* RF CAL source, 0: CAL bit, * 1: MAC; needed by Intersil * BBP */ -#define ATW_C_SYNCTL_MMICE BIT(25) /* ADM8211C/CR define this +#define ATW_C_SYNCTL_MMICE (1<<25) /* ADM8211C/CR define this * bit. 0: latch data on * negative edge, 1: positive * edge. @@ -546,7 +541,7 @@ * sets Tx power for beacon, * RTS, ATIM. */ -#define ATW_PLCPHD_PMBL BIT(15) /* 0: long preamble, 1: short */ +#define ATW_PLCPHD_PMBL (1<<15) /* 0: long preamble, 1: short */ #define ATW_MMIWADDR_LENLO_MASK 0xff000000 /* tx: written 4th */ #define ATW_MMIWADDR_LENHI_MASK 0xff0000 /* tx: written 3rd */ @@ -603,7 +598,7 @@ */ /* RXPE is re-asserted after RXPECNT * 22MHz. */ #define ATW_MMIRADDR2_RXPECNT_MASK 0xff0000 -#define ATW_MMIRADDR2_PROREXT BIT(15) /* Probe Response +#define ATW_MMIRADDR2_PROREXT (1<<15) /* Probe Response * 11Mb/s length * extension. */ @@ -611,13 +606,13 @@ * microsecond length */ -#define ATW_TXBR_ALCUPDATE_MASK BIT(31) /* auto-update BBP with ALCSET */ +#define ATW_TXBR_ALCUPDATE_MASK (1<<31) /* auto-update BBP with ALCSET */ #define ATW_TXBR_TBCNT_MASK 0x1f0000 /* transmit burst count */ #define ATW_TXBR_ALCSET_MASK 0xff00 /* TX power level set point */ #define ATW_TXBR_ALCREF_MASK 0xff /* TX power level reference point */ -#define ATW_ALCSTAT_MCOV_MASK BIT(27) /* MPDU count overflow */ -#define ATW_ALCSTAT_ESOV_MASK BIT(26) /* error sum overflow */ +#define ATW_ALCSTAT_MCOV_MASK (1<<27) /* MPDU count overflow */ +#define ATW_ALCSTAT_ESOV_MASK (1<<26) /* error sum overflow */ #define ATW_ALCSTAT_MCNT_MASK 0x3ff0000 /* MPDU count, unsigned integer */ #define ATW_ALCSTAT_ERSUM_MASK 0xffff /* power error sum, * 2's complement signed integer @@ -653,13 +648,13 @@ * end, in us */ -#define ATW_CMDR_PM BIT(19) /* enables power mgmt +#define ATW_CMDR_PM (1<<19) /* enables power mgmt * capabilities. */ -#define ATW_CMDR_APM BIT(18) /* APM mode, effective when +#define ATW_CMDR_APM (1<<18) /* APM mode, effective when * PM = 1. */ -#define ATW_CMDR_RTE BIT(4) /* enable Rx FIFO threshold */ +#define ATW_CMDR_RTE (1<<4) /* enable Rx FIFO threshold */ #define ATW_CMDR_DRT_MASK 0xc /* drain Rx FIFO threshold */ /* 32 bytes */ #define ATW_CMDR_DRT_8DW LSHIFT(0x0, ATW_CMDR_DRT_MASK) @@ -669,7 +664,7 @@ #define ATW_CMDR_DRT_SF LSHIFT(0x2, ATW_CMDR_DRT_MASK) /* Reserved */ #define ATW_CMDR_DRT_RSVD LSHIFT(0x3, ATW_CMDR_DRT_MASK) -#define ATW_CMDR_SINT_MASK BIT(1) /* software interrupt---huh? */ +#define ATW_CMDR_SINT_MASK (1<<1) /* software interrupt---huh? */ /* TBD PCIC */ @@ -727,60 +722,60 @@ /* For ADM8211C/CR */ /* ATW_C_TSC_TIMTABSEL = 1 */ -#define ATW_C_BCNT_EXTEN1 BIT(31) /* 11M beacon len. extension */ +#define ATW_C_BCNT_EXTEN1 (1<<31) /* 11M beacon len. extension */ #define ATW_C_BCNT_BEANLEN1 0x7fff0000 /* beacon length in us */ /* ATW_C_TSC_TIMTABSEL = 0 */ -#define ATW_C_BCNT_EXTEN0 BIT(15) /* 11M beacon len. extension */ +#define ATW_C_BCNT_EXTEN0 (1<<15) /* 11M beacon len. extension */ #define ATW_C_BCNT_BEANLEN0 BIT(14,0) /* beacon length in us */ #define ATW_C_TSC_TIMOFS 0xff000000 /* I think this is the * SRAM offset for the TIM */ #define ATW_C_TSC_TIMLEN 0x3ff000 /* length of TIM */ -#define ATW_C_TSC_TIMTABSEL BIT(4) /* select TIM table 0 or 1 */ +#define ATW_C_TSC_TIMTABSEL (1<<4) /* select TIM table 0 or 1 */ #define ATW_TSC_TSC_MASK 0xf /* TSFT countdown value, 0 * disables */ -#define ATW_SYNRF_SELSYN BIT(31) /* 0: MAC controls SYN IF pins, +#define ATW_SYNRF_SELSYN (1<<31) /* 0: MAC controls SYN IF pins, * 1: ATW_SYNRF controls SYN IF pins. */ -#define ATW_SYNRF_SELRF BIT(30) /* 0: MAC controls RF IF pins, +#define ATW_SYNRF_SELRF (1<<30) /* 0: MAC controls RF IF pins, * 1: ATW_SYNRF controls RF IF pins. */ -#define ATW_SYNRF_LERF BIT(29) /* if SELSYN = 1, direct control of +#define ATW_SYNRF_LERF (1<<29) /* if SELSYN = 1, direct control of * LERF# pin */ -#define ATW_SYNRF_LEIF BIT(28) /* if SELSYN = 1, direct control of +#define ATW_SYNRF_LEIF (1<<28) /* if SELSYN = 1, direct control of * LEIF# pin */ -#define ATW_SYNRF_SYNCLK BIT(27) /* if SELSYN = 1, direct control of +#define ATW_SYNRF_SYNCLK (1<<27) /* if SELSYN = 1, direct control of * SYNCLK pin */ -#define ATW_SYNRF_SYNDATA BIT(26) /* if SELSYN = 1, direct control of +#define ATW_SYNRF_SYNDATA (1<<26) /* if SELSYN = 1, direct control of * SYNDATA pin */ -#define ATW_SYNRF_PE1 BIT(25) /* if SELRF = 1, direct control of +#define ATW_SYNRF_PE1 (1<<25) /* if SELRF = 1, direct control of * PE1 pin */ -#define ATW_SYNRF_PE2 BIT(24) /* if SELRF = 1, direct control of +#define ATW_SYNRF_PE2 (1<<24) /* if SELRF = 1, direct control of * PE2 pin */ -#define ATW_SYNRF_PAPE BIT(23) /* if SELRF = 1, direct control of +#define ATW_SYNRF_PAPE (1<<23) /* if SELRF = 1, direct control of * PAPE pin */ -#define ATW_C_SYNRF_TRSW BIT(22) /* if SELRF = 1, direct control of +#define ATW_C_SYNRF_TRSW (1<<22) /* if SELRF = 1, direct control of * TRSW pin */ -#define ATW_C_SYNRF_TRSWN BIT(21) /* if SELRF = 1, direct control of +#define ATW_C_SYNRF_TRSWN (1<<21) /* if SELRF = 1, direct control of * TRSWn pin */ -#define ATW_SYNRF_INTERSIL_EN BIT(20) /* if SELRF = 1, enables +#define ATW_SYNRF_INTERSIL_EN (1<<20) /* if SELRF = 1, enables * some signal used by the * Intersil RF front-end? * Undocumented. */ -#define ATW_SYNRF_PHYRST BIT(18) /* if SELRF = 1, direct control of +#define ATW_SYNRF_PHYRST (1<<18) /* if SELRF = 1, direct control of * PHYRST# pin */ /* 1: force TXPE = RXPE = 1 if ATW_CMDR[27] = 0. */ @@ -802,14 +797,14 @@ * 10? * default 0 */ -#define ATW_CAP0_RCVDTIM BIT(4) /* receive every DTIM */ +#define ATW_CAP0_RCVDTIM (1<<4) /* receive every DTIM */ #define ATW_CAP0_CHN_MASK 0xf /* current DSSS channel */ #define ATW_CAP1_CAPI_MASK 0xffff0000 /* capability information */ #define ATW_CAP1_ATIMW_MASK 0xffff /* ATIM window in TU */ -#define ATW_RMD_ATIMST BIT(31) /* ATIM frame TX status */ -#define ATW_RMD_CFP BIT(30) /* CFP indicator */ +#define ATW_RMD_ATIMST (1<<31) /* ATIM frame TX status */ +#define ATW_RMD_CFP (1<<30) /* CFP indicator */ #define ATW_RMD_PCNT 0xfff0000 /* idle time between * awake/ps mode, in seconds */ @@ -852,17 +847,17 @@ #define ATW_RSPT_MIRT_MASK 0xff00 /* min response time in us */ #define ATW_RSPT_TSFTOFST_MASK 0xff /* TX TSFT offset in us */ -#define ATW_WEPCTL_WEPENABLE BIT(31) /* enable WEP engine */ -#define ATW_WEPCTL_AUTOSWITCH BIT(30) /* auto-switch enable (huh?) */ -#define ATW_WEPCTL_CURTBL BIT(29) /* current table in use */ -#define ATW_WEPCTL_WR BIT(28) /* */ -#define ATW_WEPCTL_RD BIT(27) /* */ -#define ATW_WEPCTL_WEPRXBYP BIT(25) /* bypass WEP on RX */ -#define ATW_WEPCTL_SHKEY BIT(24) /* 1: pass to host if tbl +#define ATW_WEPCTL_WEPENABLE (1<<31) /* enable WEP engine */ +#define ATW_WEPCTL_AUTOSWITCH (1<<30) /* auto-switch enable (huh?) */ +#define ATW_WEPCTL_CURTBL (1<<29) /* current table in use */ +#define ATW_WEPCTL_WR (1<<28) /* */ +#define ATW_WEPCTL_RD (1<<27) /* */ +#define ATW_WEPCTL_WEPRXBYP (1<<25) /* bypass WEP on RX */ +#define ATW_WEPCTL_SHKEY (1<<24) /* 1: pass to host if tbl * lookup fails, 0: use * shared-key */ -#define ATW_WEPCTL_UNKNOWN0 BIT(23) /* has something to do with +#define ATW_WEPCTL_UNKNOWN0 (1<<23) /* has something to do with * revision 0x20. Possibly * selects a different WEP * table. @@ -872,30 +867,30 @@ /* set these bits in the second byte of a SRAM shared key record to affect * the use and interpretation of the key in the record. */ -#define ATW_WEP_ENABLED BIT(7) -#define ATW_WEP_104BIT BIT(6) +#define ATW_WEP_ENABLED (1<<7) +#define ATW_WEP_104BIT (1<<6) #define ATW_WESK_DATA_MASK 0xffff /* data */ #define ATW_WEPCNT_WIEC_MASK 0xffff /* WEP ICV error count */ -#define ATW_MACTEST_FORCE_IV BIT(23) -#define ATW_MACTEST_FORCE_KEYID BIT(22) +#define ATW_MACTEST_FORCE_IV (1<<23) +#define ATW_MACTEST_FORCE_KEYID (1<<22) #define ATW_MACTEST_KEYID_MASK 0x300000 -#define ATW_MACTEST_MMI_USETXCLK BIT(11) +#define ATW_MACTEST_MMI_USETXCLK (1<<11) /* Function Event/Status registers */ -#define ATW_FER_INTR BIT(15) /* interrupt: set regardless of mask */ -#define ATW_FER_GWAKE BIT(4) /* general wake-up: set regardless of mask */ +#define ATW_FER_INTR (1<<15) /* interrupt: set regardless of mask */ +#define ATW_FER_GWAKE (1<<4) /* general wake-up: set regardless of mask */ -#define ATW_FEMR_INTR_EN BIT(15) /* enable INTA# */ -#define ATW_FEMR_WAKEUP_EN BIT(14) /* enable wake-up */ -#define ATW_FEMR_GWAKE_EN BIT(4) /* enable general wake-up */ +#define ATW_FEMR_INTR_EN (1<<15) /* enable INTA# */ +#define ATW_FEMR_WAKEUP_EN (1<<14) /* enable wake-up */ +#define ATW_FEMR_GWAKE_EN (1<<4) /* enable general wake-up */ -#define ATW_FPSR_INTR_STATUS BIT(15) /* interrupt status */ -#define ATW_FPSR_WAKEUP_STATUS BIT(4) /* CSTSCHG state */ -#define ATW_FFER_INTA_FORCE BIT(15) /* activate INTA (if not masked) */ -#define ATW_FFER_GWAKE_FORCE BIT(4) /* activate CSTSCHG (if not masked) */ +#define ATW_FPSR_INTR_STATUS (1<<15) /* interrupt status */ +#define ATW_FPSR_WAKEUP_STATUS (1<<4) /* CSTSCHG state */ +#define ATW_FFER_INTA_FORCE (1<<15) /* activate INTA (if not masked) */ +#define ATW_FFER_GWAKE_FORCE (1<<4) /* activate CSTSCHG (if not masked) */ /* Serial EEPROM offsets */ #define ATW_SR_CLASS_CODE (0x00/2) @@ -953,28 +948,28 @@ struct atw_txdesc { u_int32_t at_buf2; }; -#define ATW_TXCTL_OWN BIT(31) /* 1: ready to transmit */ -#define ATW_TXCTL_DONE BIT(30) /* 0: not processed */ +#define ATW_TXCTL_OWN (1<<31) /* 1: ready to transmit */ +#define ATW_TXCTL_DONE (1<<30) /* 0: not processed */ #define ATW_TXCTL_TXDR_MASK 0xff00000 /* TX data rate (?) */ #define ATW_TXCTL_TL_MASK 0xfffff /* retry limit, 0 - 255 */ #define ATW_TXSTAT_OWN ATW_TXCTL_OWN /* 0: not for transmission */ #define ATW_TXSTAT_DONE ATW_TXCTL_DONE /* 1: been processed */ -#define ATW_TXSTAT_ES BIT(29) /* 0: TX successful */ -#define ATW_TXSTAT_TLT BIT(28) /* TX lifetime expired */ -#define ATW_TXSTAT_TRT BIT(27) /* TX retry limit expired */ -#define ATW_TXSTAT_TUF BIT(26) /* TX under-run error */ -#define ATW_TXSTAT_TRO BIT(25) /* TX over-run error */ -#define ATW_TXSTAT_SOFBR BIT(24) /* packet size != buffer size +#define ATW_TXSTAT_ES (1<<29) /* 0: TX successful */ +#define ATW_TXSTAT_TLT (1<<28) /* TX lifetime expired */ +#define ATW_TXSTAT_TRT (1<<27) /* TX retry limit expired */ +#define ATW_TXSTAT_TUF (1<<26) /* TX under-run error */ +#define ATW_TXSTAT_TRO (1<<25) /* TX over-run error */ +#define ATW_TXSTAT_SOFBR (1<<24) /* packet size != buffer size * (?) */ #define ATW_TXSTAT_ARC_MASK 0xfff /* accumulated retry count */ -#define ATW_TXFLAG_IC BIT(31) /* interrupt on completion */ -#define ATW_TXFLAG_LS BIT(30) /* packet's last descriptor */ -#define ATW_TXFLAG_FS BIT(29) /* packet's first descriptor */ -#define ATW_TXFLAG_TER BIT(25) /* end of ring */ -#define ATW_TXFLAG_TCH BIT(24) /* at_buf2 is 2nd chain */ +#define ATW_TXFLAG_IC (1<<31) /* interrupt on completion */ +#define ATW_TXFLAG_LS (1<<30) /* packet's last descriptor */ +#define ATW_TXFLAG_FS (1<<29) /* packet's first descriptor */ +#define ATW_TXFLAG_TER (1<<25) /* end of ring */ +#define ATW_TXFLAG_TCH (1<<24) /* at_buf2 is 2nd chain */ #define ATW_TXFLAG_TBS2_MASK 0xfff000 /* at_buf2 byte count */ #define ATW_TXFLAG_TBS1_MASK 0xfff /* at_buf1 byte count */ @@ -988,33 +983,33 @@ struct atw_rxdesc { #define ar_rssi ar_ctl -#define ATW_RXCTL_RER BIT(25) /* end of ring */ -#define ATW_RXCTL_RCH BIT(24) /* ar_buf2 is 2nd chain */ +#define ATW_RXCTL_RER (1<<25) /* end of ring */ +#define ATW_RXCTL_RCH (1<<24) /* ar_buf2 is 2nd chain */ #define ATW_RXCTL_RBS2_MASK 0xfff000 /* ar_buf2 byte count */ #define ATW_RXCTL_RBS1_MASK 0xfff /* ar_buf1 byte count */ -#define ATW_RXSTAT_OWN BIT(31) /* 1: NIC may fill descriptor */ -#define ATW_RXSTAT_ES BIT(30) /* error summary, 0 on +#define ATW_RXSTAT_OWN (1<<31) /* 1: NIC may fill descriptor */ +#define ATW_RXSTAT_ES (1<<30) /* error summary, 0 on * success */ -#define ATW_RXSTAT_SQL BIT(29) /* has signal quality (?) */ -#define ATW_RXSTAT_DE BIT(28) /* descriptor error---packet is +#define ATW_RXSTAT_SQL (1<<29) /* has signal quality (?) */ +#define ATW_RXSTAT_DE (1<<28) /* descriptor error---packet is * truncated. last descriptor * only */ -#define ATW_RXSTAT_FS BIT(27) /* packet's first descriptor */ -#define ATW_RXSTAT_LS BIT(26) /* packet's last descriptor */ -#define ATW_RXSTAT_PCF BIT(25) /* received during CFP */ -#define ATW_RXSTAT_SFDE BIT(24) /* PLCP SFD error */ -#define ATW_RXSTAT_SIGE BIT(23) /* PLCP signal error */ -#define ATW_RXSTAT_CRC16E BIT(22) /* PLCP CRC16 error */ -#define ATW_RXSTAT_RXTOE BIT(21) /* RX time-out, last descriptor +#define ATW_RXSTAT_FS (1<<27) /* packet's first descriptor */ +#define ATW_RXSTAT_LS (1<<26) /* packet's last descriptor */ +#define ATW_RXSTAT_PCF (1<<25) /* received during CFP */ +#define ATW_RXSTAT_SFDE (1<<24) /* PLCP SFD error */ +#define ATW_RXSTAT_SIGE (1<<23) /* PLCP signal error */ +#define ATW_RXSTAT_CRC16E (1<<22) /* PLCP CRC16 error */ +#define ATW_RXSTAT_RXTOE (1<<21) /* RX time-out, last descriptor * only. */ -#define ATW_RXSTAT_CRC32E BIT(20) /* CRC32 error */ -#define ATW_RXSTAT_ICVE BIT(19) /* WEP ICV error */ -#define ATW_RXSTAT_DA1 BIT(17) /* DA bit 1, admin'd address */ -#define ATW_RXSTAT_DA0 BIT(16) /* DA bit 0, group address */ +#define ATW_RXSTAT_CRC32E (1<<20) /* CRC32 error */ +#define ATW_RXSTAT_ICVE (1<<19) /* WEP ICV error */ +#define ATW_RXSTAT_DA1 (1<<17) /* DA bit 1, admin'd address */ +#define ATW_RXSTAT_DA0 (1<<16) /* DA bit 0, group address */ #define ATW_RXSTAT_RXDR_MASK 0xf000 /* RX data rate */ #define ATW_RXSTAT_FL_MASK 0xfff /* RX frame length, last * descriptor only diff --git a/sys/dev/ic/atwvar.h b/sys/dev/ic/atwvar.h index 2b3b3cd29e7..b84a9254f31 100644 --- a/sys/dev/ic/atwvar.h +++ b/sys/dev/ic/atwvar.h @@ -1,4 +1,4 @@ -/* $OpenBSD: atwvar.h,v 1.19 2009/08/16 17:24:04 jsg Exp $ */ +/* $OpenBSD: atwvar.h,v 1.20 2009/08/16 18:03:48 jsg Exp $ */ /* $NetBSD: atwvar.h,v 1.13 2004/07/23 07:07:55 dyoung Exp $ */ /* @@ -332,11 +332,11 @@ struct atw_frame { #define atw_keyid u.s1.keyid #define atw_ihdr u.s2.ihdr -#define ATW_HDRCTL_SHORT_PREAMBLE BIT(0) /* use short preamble */ -#define ATW_HDRCTL_RTSCTS BIT(4) /* send RTS */ -#define ATW_HDRCTL_WEP BIT(5) -#define ATW_HDRCTL_UNKNOWN1 BIT(15) /* MAC adds FCS? */ -#define ATW_HDRCTL_UNKNOWN2 BIT(8) +#define ATW_HDRCTL_SHORT_PREAMBLE (1<<0) /* use short preamble */ +#define ATW_HDRCTL_RTSCTS (1<<4) /* send RTS */ +#define ATW_HDRCTL_WEP (1<<5) +#define ATW_HDRCTL_UNKNOWN1 (1<<15) /* MAC adds FCS? */ +#define ATW_HDRCTL_UNKNOWN2 (1<<8) #define ATW_FRAGTHR_FRAGTHR_MASK 0x0fff #define ATW_FRAGNUM_FRAGNUM_MASK 0x00f0 diff --git a/sys/dev/ic/rf3000reg.h b/sys/dev/ic/rf3000reg.h index 6a50c77d22b..9a07e6b3c02 100644 --- a/sys/dev/ic/rf3000reg.h +++ b/sys/dev/ic/rf3000reg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: rf3000reg.h,v 1.2 2004/07/25 00:15:47 millert Exp $ */ +/* $OpenBSD: rf3000reg.h,v 1.3 2009/08/16 18:03:48 jsg Exp $ */ /* $NetBSD: rf3000reg.h,v 1.3 2004/07/21 04:25:22 dyoung Exp $ */ /* @@ -47,7 +47,7 @@ * Registers for RFMD RF3000. */ #define RF3000_CTL 0x01 /* modem control */ -#define RF3000_CTL_MODE_MASK BITS(7, 4) +#define RF3000_CTL_MODE_MASK 0xf0 #define RF3000_CTL_MODE_1MBPS 0 #define RF3000_CTL_MODE_RSVD0 1 #define RF3000_CTL_MODE_2MBPS 2 @@ -61,57 +61,57 @@ #define RF3000_CTL_MODE_RSVD1 10 #define RF3000_CTL_MODE_RSVD2 11 #define RF3000_RXSTAT RF3000_CTL /* RX status */ -#define RF3000_RXSTAT_SHORTPRE BIT(3) /* 1: short preamble */ -#define RF3000_RXSTAT_ACQ BIT(2) /* 1: acquired */ -#define RF3000_RXSTAT_SFD BIT(1) /* 1: SFD detected */ -#define RF3000_RXSTAT_CRC BIT(0) /* 1: CRC invalid */ +#define RF3000_RXSTAT_SHORTPRE (1<<3) /* 1: short preamble */ +#define RF3000_RXSTAT_ACQ (1<<2) /* 1: acquired */ +#define RF3000_RXSTAT_SFD (1<<1) /* 1: SFD detected */ +#define RF3000_RXSTAT_CRC (1<<0) /* 1: CRC invalid */ #define RF3000_CCACTL 0x02 /* CCA control */ /* CCA mode */ -#define RF3000_CCACTL_MODE_MASK BITS(7, 6) +#define RF3000_CCACTL_MODE_MASK 0xc0 #define RF3000_CCACTL_MODE_RSSIT 0 /* RSSI threshold */ #define RF3000_CCACTL_MODE_ACQ 1 /* acquisition */ #define RF3000_CCACTL_MODE_BOTH 2 /* threshold or acq. */ /* RSSI threshold for CCA */ -#define RF3000_CCACTL_RSSIT_MASK BITS(5, 0) +#define RF3000_CCACTL_RSSIT_MASK 0x3f #define RF3000_DIVCTL 0x03 /* diversity control */ -#define RF3000_DIVCTL_ENABLE BIT(7) /* enable diversity */ -#define RF3000_DIVCTL_ANTSEL BIT(6) /* if ENABLE = 0, set +#define RF3000_DIVCTL_ENABLE (1<<7) /* enable diversity */ +#define RF3000_DIVCTL_ANTSEL (1<<6) /* if ENABLE = 0, set * ANT SEL */ #define RF3000_RSSI RF3000_DIVCTL /* RSSI value */ -#define RF3000_RSSI_MASK BITS(5, 0) +#define RF3000_RSSI_MASK 0x3f #define RF3000_GAINCTL 0x11 /* TX variable gain control */ -#define RF3000_GAINCTL_TXVGC_MASK BITS(7, 2) -#define RF3000_GAINCTL_SCRAMBLER BIT(1) +#define RF3000_GAINCTL_TXVGC_MASK 0xfc +#define RF3000_GAINCTL_SCRAMBLER (1<<1) #define RF3000_LOGAINCAL 0x14 /* low gain calibration */ -#define RF3000_LOGAINCAL_CAL_MASK BITS(5, 0) +#define RF3000_LOGAINCAL_CAL_MASK 0x3f #define RF3000_HIGAINCAL 0x15 /* high gain calibration */ -#define RF3000_HIGAINCAL_CAL_MASK BITS(5, 0) -#define RF3000_HIGAINCAL_DSSSPAD BIT(6) /* 6dB gain pad for DSSS +#define RF3000_HIGAINCAL_CAL_MASK 0x3f +#define RF3000_HIGAINCAL_DSSSPAD (1<<6) /* 6dB gain pad for DSSS * modes (meaning?) */ #define RF3000_OPTIONS1 0x1C /* Options Register 1 */ /* Saturation threshold is 4 + offset, where -3 <= offset <= 3. * SAT_THRESH is the absolute value, SAT_THRESH_SIGN is the sign. */ -#define RF3000_OPTIONS1_SAT_THRESH_SIGN BIT(7) -#define RF3000_OPTIONS1_SAT_THRESH BITS(6,5) -#define RF3000_OPTIONS1_ALTAGC BIT(4) /* 1: retrigger AGC +#define RF3000_OPTIONS1_SAT_THRESH_SIGN (1<<7) +#define RF3000_OPTIONS1_SAT_THRESH 0x60 +#define RF3000_OPTIONS1_ALTAGC (1<<4) /* 1: retrigger AGC * algorithm on ADC * saturation */ -#define RF3000_OPTIONS1_ALTBUS BIT(3) /* 1: enable alternate +#define RF3000_OPTIONS1_ALTBUS (1<<3) /* 1: enable alternate * Tx/Rx data bus * interface. */ -#define RF3000_OPTIONS1_RESERVED0_MASK BITS(2,0)/* 0 */ +#define RF3000_OPTIONS1_RESERVED0_MASK 0x7/* 0 */ #define RF3000_OPTIONS2 0x1D /* Options Register 2 */ /* 1: delay next AGC 2us instead of 1us after a 1->0 LNAGS-pin transition. */ -#define RF3000_OPTIONS2_LNAGS_DELAY BIT(7) -#define RF3000_OPTIONS2_RESERVED0_MASK BITS(6,3) /* 0 */ +#define RF3000_OPTIONS2_LNAGS_DELAY (1<<7) +#define RF3000_OPTIONS2_RESERVED0_MASK 0x78 /* 0 */ /* Threshold for AGC re-trigger. 0: high count, 1: low count. */ -#define RF3000_OPTIONS2_RTG_THRESH BIT(2) -#define RF3000_OPTIONS2_RESERVED1_MASK BITS(1,0) /* 0 */ +#define RF3000_OPTIONS2_RTG_THRESH (1<<2) +#define RF3000_OPTIONS2_RESERVED1_MASK 0x3 /* 0 */ #endif /* _DEV_IC_RF3000REG_H_ */ diff --git a/sys/dev/ic/si4136reg.h b/sys/dev/ic/si4136reg.h index 9ab399751d4..1708eb8533c 100644 --- a/sys/dev/ic/si4136reg.h +++ b/sys/dev/ic/si4136reg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: si4136reg.h,v 1.2 2004/10/01 04:08:45 jsg Exp $ */ +/* $OpenBSD: si4136reg.h,v 1.3 2009/08/16 18:03:48 jsg Exp $ */ /* $NetBSD$ */ /* @@ -38,14 +38,14 @@ /* * Serial bus format for Silicon Laboratories Si4126/Si4136 RF synthesizer. */ -#define SI4126_TWI_DATA_MASK BITS(21, 4) -#define SI4126_TWI_ADDR_MASK BITS(3, 0) +#define SI4126_TWI_DATA_MASK 0x3ffff0 +#define SI4126_TWI_ADDR_MASK 0xf /* * Registers for Silicon Laboratories Si4126/Si4136 RF synthesizer. */ #define SI4126_MAIN 0 /* main configuration */ -#define SI4126_MAIN_AUXSEL_MASK BITS(13, 12) /* aux. output pin function */ +#define SI4126_MAIN_AUXSEL_MASK 0x3000 /* aux. output pin function */ /* reserved */ #define SI4126_MAIN_AUXSEL_RSVD LSHIFT(0x0, SI4126_MAIN_AUXSEL_MASK) /* force low */ @@ -53,13 +53,13 @@ /* Lock Detect (LDETB) */ #define SI4126_MAIN_AUXSEL_LDETB LSHIFT(0x3, SI4126_MAIN_AUXSEL_MASK) -#define SI4126_MAIN_IFDIV_MASK BITS(11, 10) /* IFOUT = IFVCO +#define SI4126_MAIN_IFDIV_MASK 0xc00 /* IFOUT = IFVCO * frequency / 2**IFDIV. */ -#define SI4126_MAIN_XINDIV2 BIT(6) /* 1: divide crystal input (XIN) by 2 */ -#define SI4126_MAIN_LPWR BIT(5) /* 1: low-power mode */ -#define SI4126_MAIN_AUTOPDB BIT(3) /* 1: equivalent to +#define SI4126_MAIN_XINDIV2 (1<<6) /* 1: divide crystal input (XIN) by 2 */ +#define SI4126_MAIN_LPWR (1<<5) /* 1: low-power mode */ +#define SI4126_MAIN_AUTOPDB (1<<3) /* 1: equivalent to * reg[SI4126_POWER] <- * SI4126_POWER_PDIB | * SI4126_POWER_PDRB. @@ -69,13 +69,13 @@ */ #define SI4126_GAIN 1 /* phase detector gain */ -#define SI4126_GAIN_KPI_MASK BITS(5, 4) /* IF phase detector gain */ -#define SI4126_GAIN_KP2_MASK BITS(3, 2) /* RF2 phase detector gain */ -#define SI4126_GAIN_KP1_MASK BITS(1, 0) /* RF1 phase detector gain */ +#define SI4126_GAIN_KPI_MASK 0x30 /* IF phase detector gain */ +#define SI4126_GAIN_KP2_MASK 0xc /* RF2 phase detector gain */ +#define SI4126_GAIN_KP1_MASK 0x3 /* RF1 phase detector gain */ #define SI4126_POWER 2 /* powerdown */ -#define SI4126_POWER_PDIB BIT(1) /* 1: IF synthesizer on */ -#define SI4126_POWER_PDRB BIT(0) /* 1: RF synthesizer on */ +#define SI4126_POWER_PDIB (1<<1) /* 1: IF synthesizer on */ +#define SI4126_POWER_PDRB (1<<0) /* 1: RF synthesizer on */ #define SI4126_RF1N 3 /* RF1 N divider */ #define SI4126_RF2N 4 /* RF2 N divider */ |