diff options
Diffstat (limited to 'sys')
| -rw-r--r-- | sys/lib/libsa/Makefile | 9 | ||||
| -rw-r--r-- | sys/lib/libsa/close.c | 6 | ||||
| -rw-r--r-- | sys/lib/libsa/cread.c | 409 | ||||
| -rw-r--r-- | sys/lib/libsa/lseek.c | 6 | ||||
| -rw-r--r-- | sys/lib/libsa/open.c | 6 | ||||
| -rw-r--r-- | sys/lib/libsa/read.c | 6 | ||||
| -rw-r--r-- | sys/lib/libsa/stand.h | 9 | ||||
| -rw-r--r-- | sys/lib/libz/Makefile | 34 | ||||
| -rw-r--r-- | sys/lib/libz/Makefile.inc | 71 | ||||
| -rw-r--r-- | sys/lib/libz/adler32.c | 48 | ||||
| -rw-r--r-- | sys/lib/libz/crc32.c | 162 | ||||
| -rw-r--r-- | sys/lib/libz/infblock.c | 402 | ||||
| -rw-r--r-- | sys/lib/libz/infblock.h | 37 | ||||
| -rw-r--r-- | sys/lib/libz/infcodes.c | 247 | ||||
| -rw-r--r-- | sys/lib/libz/infcodes.h | 27 | ||||
| -rw-r--r-- | sys/lib/libz/inffast.c | 168 | ||||
| -rw-r--r-- | sys/lib/libz/inffast.h | 17 | ||||
| -rw-r--r-- | sys/lib/libz/inflate.c | 345 | ||||
| -rw-r--r-- | sys/lib/libz/inftrees.c | 470 | ||||
| -rw-r--r-- | sys/lib/libz/inftrees.h | 59 | ||||
| -rw-r--r-- | sys/lib/libz/infutil.c | 87 | ||||
| -rw-r--r-- | sys/lib/libz/infutil.h | 99 | ||||
| -rw-r--r-- | sys/lib/libz/zconf.h | 184 | ||||
| -rw-r--r-- | sys/lib/libz/zlib.h | 780 | ||||
| -rw-r--r-- | sys/lib/libz/zutil.h | 203 |
25 files changed, 3885 insertions, 6 deletions
diff --git a/sys/lib/libsa/Makefile b/sys/lib/libsa/Makefile index 4165ff0a6c2..5ff86f98344 100644 --- a/sys/lib/libsa/Makefile +++ b/sys/lib/libsa/Makefile @@ -1,4 +1,4 @@ -# $OpenBSD: Makefile,v 1.9 1996/12/08 15:15:44 niklas Exp $ +# $OpenBSD: Makefile,v 1.10 1997/02/06 02:56:44 downsj Exp $ # $NetBSD: Makefile,v 1.13 1996/10/02 16:19:51 ws Exp $ LIB= sa @@ -16,6 +16,10 @@ CFLAGS+=${XCFLAGS} -D_STANDALONE -DCOMPAT_UFS $(DEBUGFLAGS) -I${DIR} -I${DIR}/.. CFLAGS+=$(EXTRACFLAGS) CPPFLAGS+=${XCPPFLAGS} +.if defined(SA_ZLIB) +CPPFLAGS+= -D__INTERNAL_LIBSA_CREAD +.endif + .if ${MACHINE_ARCH}=="i386" .PATH: ${DIR}/../../arch/${MACHINE_ARCH}/stand .include "${DIR}/../../arch/${MACHINE_ARCH}/stand/Makefile.inc" @@ -28,6 +32,9 @@ SRCS+= alloc.c memcpy.c exit.c exec.c getfile.c gets.c globals.c \ # io routines SRCS+= close.c closeall.c dev.c disklabel.c dkcksum.c ioctl.c \ lseek.c open.c nullfs.c read.c stat.c fstat.c write.c +.if defined(SA_ZLIB) +SRCS+= cread.c +.endif .if !defined(NO_NET) # network routines diff --git a/sys/lib/libsa/close.c b/sys/lib/libsa/close.c index cf947d3333a..cc9876fa9c1 100644 --- a/sys/lib/libsa/close.c +++ b/sys/lib/libsa/close.c @@ -1,4 +1,4 @@ -/* $OpenBSD: close.c,v 1.4 1996/09/23 14:18:49 mickey Exp $ */ +/* $OpenBSD: close.c,v 1.5 1997/02/06 02:56:44 downsj Exp $ */ /* $NetBSD: close.c,v 1.5 1995/09/06 19:53:29 pk Exp $ */ /*- @@ -69,7 +69,11 @@ #include "saerrno.h" int +#ifndef __INTERNAL_LIBSA_CREAD close(fd) +#else +oclose(fd) +#endif int fd; { register struct open_file *f = &files[fd]; diff --git a/sys/lib/libsa/cread.c b/sys/lib/libsa/cread.c new file mode 100644 index 00000000000..3ec595014c0 --- /dev/null +++ b/sys/lib/libsa/cread.c @@ -0,0 +1,409 @@ +/* $OpenBSD: cread.c,v 1.1 1997/02/06 02:56:45 downsj Exp $ */ +/* $NetBSD: cread.c,v 1.2 1997/02/04 18:38:20 thorpej Exp $ */ + +/* + * Copyright (c) 1996 + * Matthias Drochner. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed for the NetBSD Project + * by Matthias Drochner. + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* support for compressed bootfiles + (only read) + replaces open(), close(), read(), lseek(). + original libsa open(), close(), read(), lseek() are called + as oopen(), oclose(), oread() resp. olseek(). + compression parts stripped from zlib:gzio.c + */ + +/* gzio.c -- IO on .gz files + * Copyright (C) 1995-1996 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "stand.h" +#include "../libz/zlib.h" + +#define EOF (-1) /* needed by compression code */ + +#ifdef SAVE_MEMORY +#define Z_BUFSIZE 1024 +#else +#define Z_BUFSIZE 4096 +#endif + +static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ +#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define RESERVED 0xE0 /* bits 5..7: reserved */ + +static struct sd { + z_stream stream; + int z_err; /* error code for last stream operation */ + int z_eof; /* set if end of input file */ + int fd; + unsigned char *inbuf; /* input buffer */ + unsigned long crc; /* crc32 of uncompressed data */ + int transparent; /* 1 if input file is not a .gz file */ +} *ss[SOPEN_MAX]; + +/* + * compression utilities + */ + +void *zcalloc (opaque, items, size) +void *opaque; +unsigned items; +unsigned size; +{ + return(alloc(items * size)); +} + +void zcfree (opaque, ptr) +void *opaque; +void *ptr; +{ + free(ptr, 0); /* XXX works only with modified allocator */ +} + +void zmemcpy(dest, source, len) +unsigned char *dest; +unsigned char *source; +unsigned int len; +{ + bcopy(source, dest, len); +} + +static int get_byte(s) + struct sd *s; +{ + if (s->z_eof) return EOF; + if (s->stream.avail_in == 0) { + errno = 0; + s->stream.avail_in = oread(s->fd, s->inbuf, Z_BUFSIZE); + if (s->stream.avail_in == 0) { + s->z_eof = 1; + if (errno) s->z_err = Z_ERRNO; + return EOF; + } + s->stream.next_in = s->inbuf; + } + s->stream.avail_in--; + return *(s->stream.next_in)++; +} + +static unsigned long getLong (s) + struct sd *s; +{ + unsigned long x = (unsigned long)get_byte(s); + int c; + + x += ((unsigned long)get_byte(s))<<8; + x += ((unsigned long)get_byte(s))<<16; + c = get_byte(s); + if (c == EOF) s->z_err = Z_DATA_ERROR; + x += ((unsigned long)c)<<24; + return x; +} + +static void check_header(s) + struct sd *s; +{ + int method; /* method byte */ + int flags; /* flags byte */ + unsigned int len; + int c; + + /* Check the gzip magic header */ + for (len = 0; len < 2; len++) { + c = get_byte(s); + if (c != gz_magic[len]) { + s->transparent = 1; + if (c != EOF) s->stream.avail_in++, s->stream.next_in--; + s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END; + return; + } + } + method = get_byte(s); + flags = get_byte(s); + if (method != Z_DEFLATED || (flags & RESERVED) != 0) { + s->z_err = Z_DATA_ERROR; + return; + } + + /* Discard time, xflags and OS code: */ + for (len = 0; len < 6; len++) (void)get_byte(s); + + if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */ + len = (unsigned int)get_byte(s); + len += ((unsigned int)get_byte(s))<<8; + /* len is garbage if EOF but the loop below will quit anyway */ + while (len-- != 0 && get_byte(s) != EOF) ; + } + if ((flags & ORIG_NAME) != 0) { /* skip the original file name */ + while ((c = get_byte(s)) != 0 && c != EOF) ; + } + if ((flags & COMMENT) != 0) { /* skip the .gz file comment */ + while ((c = get_byte(s)) != 0 && c != EOF) ; + } + if ((flags & HEAD_CRC) != 0) { /* skip the header crc */ + for (len = 0; len < 2; len++) (void)get_byte(s); + } + s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK; +} + +/* + * new open(), close(), read(), lseek() + */ + +int +open(fname, mode) + const char *fname; + int mode; +{ + int fd; + struct sd *s = 0; + + if(((fd = oopen(fname, mode)) == -1) + || (mode != 0)) /* compression only for read */ + return(fd); + + ss[fd] = s = alloc(sizeof(struct sd)); + if(!s) goto errout; + bzero(s, sizeof(struct sd)); + + if(inflateInit2(&(s->stream), -15) != Z_OK) + goto errout; + + s->stream.next_in = s->inbuf = (unsigned char*)alloc(Z_BUFSIZE); + if(!s->inbuf) { + inflateEnd(&(s->stream)); + goto errout; + } + + s->fd = fd; + check_header(s); /* skip the .gz header */ + return(fd); + +errout: + if(s) free(s, sizeof(struct sd)); + oclose(fd); + return(-1); +} + +int +close(fd) + int fd; +{ + struct open_file *f; + struct sd *s; + + if ((unsigned)fd >= SOPEN_MAX) { + errno = EBADF; + return (-1); + } + f = &files[fd]; + + if(!(f->f_flags & F_READ)) + return(oclose(fd)); + + s = ss[fd]; + + inflateEnd(&(s->stream)); + + free(s->inbuf, Z_BUFSIZE); + free(s, sizeof(struct sd)); + + return(oclose(fd)); +} + +ssize_t +read(fd, buf, len) + int fd; + void *buf; + size_t len; +{ + struct sd *s; + unsigned char *start = buf; /* starting point for crc computation */ + + s = ss[fd]; + + if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1; + if (s->z_err == Z_STREAM_END) return 0; /* EOF */ + + s->stream.next_out = buf; + s->stream.avail_out = len; + + while (s->stream.avail_out != 0) { + + if (s->transparent) { + /* Copy first the lookahead bytes: */ + unsigned int n = s->stream.avail_in; + if (n > s->stream.avail_out) n = s->stream.avail_out; + if (n > 0) { + zmemcpy(s->stream.next_out, s->stream.next_in, n); + s->stream.next_out += n; + s->stream.next_in += n; + s->stream.avail_out -= n; + s->stream.avail_in -= n; + } + if (s->stream.avail_out > 0) { + s->stream.avail_out -= oread(s->fd, s->stream.next_out, s->stream.avail_out); + } + return (int)(len - s->stream.avail_out); + } + + if (s->stream.avail_in == 0 && !s->z_eof) { + + errno = 0; + s->stream.avail_in = oread(fd, s->inbuf, Z_BUFSIZE); + if (s->stream.avail_in == 0) { + s->z_eof = 1; + if (errno) { + s->z_err = Z_ERRNO; + break; + } + } + s->stream.next_in = s->inbuf; + } + s->z_err = inflate(&(s->stream), Z_NO_FLUSH); + + if (s->z_err == Z_STREAM_END) { + /* Check CRC and original size */ + s->crc = crc32(s->crc, start, (unsigned int)(s->stream.next_out - start)); + start = s->stream.next_out; + + if (getLong(s) != s->crc || getLong(s) != s->stream.total_out) { + s->z_err = Z_DATA_ERROR; + } else { + /* Check for concatenated .gz files: */ + check_header(s); + if (s->z_err == Z_OK) { + inflateReset(&(s->stream)); + s->crc = crc32(0L, Z_NULL, 0); + } + } + } + if (s->z_err != Z_OK || s->z_eof) break; + } + s->crc = crc32(s->crc, start, (unsigned int)(s->stream.next_out - start)); + + return (int)(len - s->stream.avail_out); +} + +off_t +lseek(fd, offset, where) + int fd; + off_t offset; + int where; +{ + register struct open_file *f; + struct sd *s; + + if ((unsigned)fd >= SOPEN_MAX) { + errno = EBADF; + return (-1); + } + f = &files[fd];; + + if(!(f->f_flags & F_READ)) + return(olseek(fd, offset, where)); + + s = ss[fd]; + + if(s->transparent) { + off_t res = olseek(fd, offset, where); + if(res != (off_t)-1) { + /* make sure the lookahead buffer is invalid */ + s->stream.avail_in = 0; + } + return(res); + } + + switch(where) { + case SEEK_CUR: + offset += s->stream.total_out; + case SEEK_SET: + + /* if seek backwards, simply start from + the beginning */ + if(offset < s->stream.total_out) { + off_t res; + void *sav_inbuf; + + res = olseek(fd, 0, SEEK_SET); + if(res == (off_t)-1) + return(res); + /* ??? perhaps fallback to close / open */ + + inflateEnd(&(s->stream)); + + sav_inbuf = s->inbuf; /* don't allocate again */ + bzero(s, sizeof(struct sd)); /* this resets total_out to 0! */ + + inflateInit2(&(s->stream), -15); + s->stream.next_in = s->inbuf = sav_inbuf; + + s->fd = fd; + check_header(s); /* skip the .gz header */ + } + + /* to seek forwards, throw away data */ + if(offset > s->stream.total_out) { + off_t toskip = offset - s->stream.total_out; + + while(toskip > 0) { +#define DUMMYBUFSIZE 256 + char dummybuf[DUMMYBUFSIZE]; + off_t len = toskip; + if(len > DUMMYBUFSIZE) len = DUMMYBUFSIZE; + if(read(fd, dummybuf, len) != len) { + errno = EOFFSET; + return((off_t)-1); + } + toskip -= len; + } + } +#ifdef DEBUG + if(offset != s->stream.total_out) + panic("lseek compressed"); +#endif + return(offset); + case SEEK_END: + errno = EOFFSET; + break; + default: + errno = EINVAL; + } + return((off_t)-1); +} diff --git a/sys/lib/libsa/lseek.c b/sys/lib/libsa/lseek.c index 02f6443fd39..e15f1a534a7 100644 --- a/sys/lib/libsa/lseek.c +++ b/sys/lib/libsa/lseek.c @@ -1,4 +1,4 @@ -/* $OpenBSD: lseek.c,v 1.3 1996/12/08 15:15:51 niklas Exp $ */ +/* $OpenBSD: lseek.c,v 1.4 1997/02/06 02:56:45 downsj Exp $ */ /* $NetBSD: lseek.c,v 1.3 1996/06/21 20:09:03 pk Exp $ */ /*- @@ -68,7 +68,11 @@ #include "stand.h" off_t +#ifndef __INTERNAL_LIBSA_CREAD lseek(fd, offset, where) +#else +olseek(fd, offset, where) +#endif int fd; off_t offset; int where; diff --git a/sys/lib/libsa/open.c b/sys/lib/libsa/open.c index 99cc9100ea6..f98f2a5f5ae 100644 --- a/sys/lib/libsa/open.c +++ b/sys/lib/libsa/open.c @@ -1,4 +1,4 @@ -/* $OpenBSD: open.c,v 1.5 1996/12/08 15:15:54 niklas Exp $ */ +/* $OpenBSD: open.c,v 1.6 1997/02/06 02:56:46 downsj Exp $ */ /* $NetBSD: open.c,v 1.12 1996/09/30 16:01:21 ws Exp $ */ /*- @@ -74,7 +74,11 @@ struct open_file files[SOPEN_MAX]; */ int +#ifndef __INTERNAL_LIBSA_CREAD open(fname, mode) +#else +oopen(fname, mode) +#endif const char *fname; int mode; { diff --git a/sys/lib/libsa/read.c b/sys/lib/libsa/read.c index c1612521101..3e85865d0a3 100644 --- a/sys/lib/libsa/read.c +++ b/sys/lib/libsa/read.c @@ -1,4 +1,4 @@ -/* $OpenBSD: read.c,v 1.3 1996/12/08 15:15:55 niklas Exp $ */ +/* $OpenBSD: read.c,v 1.4 1997/02/06 02:56:46 downsj Exp $ */ /* $NetBSD: read.c,v 1.7 1996/06/21 20:29:28 pk Exp $ */ /*- @@ -69,7 +69,11 @@ #include "stand.h" ssize_t +#ifndef __INTERNAL_LIBSA_CREAD read(fd, dest, bcount) +#else +oread(fd, dest, bcount) +#endif int fd; void *dest; size_t bcount; diff --git a/sys/lib/libsa/stand.h b/sys/lib/libsa/stand.h index 9952ef83bc2..d0e23609070 100644 --- a/sys/lib/libsa/stand.h +++ b/sys/lib/libsa/stand.h @@ -1,4 +1,4 @@ -/* $OpenBSD: stand.h,v 1.17 1997/01/17 07:28:15 downsj Exp $ */ +/* $OpenBSD: stand.h,v 1.18 1997/02/06 02:56:47 downsj Exp $ */ /* $NetBSD: stand.h,v 1.18 1996/11/30 04:35:51 gwr Exp $ */ /*- @@ -188,6 +188,13 @@ int null_readdir __P((struct open_file *f, char *name)); void putchar __P((int)); int getchar __P((void)); +#ifdef __INTERNAL_LIBSA_CREAD +int oopen __P((const char *, int)); +int oclose __P((int)); +ssize_t oread __P((int, void *, size_t)); +off_t olseek __P((int, off_t, int)); +#endif + /* Machine dependent functions */ int devopen __P((struct open_file *, const char *, char **)); void machdep_exec __P((char *, int, char *, char *, char *)); diff --git a/sys/lib/libz/Makefile b/sys/lib/libz/Makefile new file mode 100644 index 00000000000..58ee4a337b6 --- /dev/null +++ b/sys/lib/libz/Makefile @@ -0,0 +1,34 @@ +# $OpenBSD: Makefile,v 1.1 1997/02/06 02:56:48 downsj Exp $ +# $NetBSD: Makefile,v 1.2 1997/01/22 01:36:30 cgd Exp $ + +LIB= z +NOPIC= +NOPROFILE= + +CPPFLAGS= -I. ${ZCPPFLAGS} -D_ZLIB_PRIVATE + +# files to be copied down from libz. +LIBZSRCS= adler32.c crc32.c infblock.c infcodes.c inffast.c \ + inflate.c inftrees.c infutil.c +LIBZHDRS= infblock.h infcodes.h inffast.h inftrees.h infutil.h \ + zconf.h zlib.h zutil.h + +# Other stuff +SRCS= ${LIBZSRCS} + +# Files to clean up +CLEANFILES+= lib${LIB}.o + +install: + +.include <bsd.lib.mk> + +lib${LIB}.o:: ${OBJS} + @echo building standard ${LIB} library + @rm -f lib${LIB}.o + @${LD} -r -o lib${LIB}.o `lorder ${OBJS} | tsort` + +update-sources: + for file in ${LIBZSRCS} ${LIBZHDRS}; do \ + cp ${.CURDIR}/../../../lib/libz/$$file ${.CURDIR}; \ + done diff --git a/sys/lib/libz/Makefile.inc b/sys/lib/libz/Makefile.inc new file mode 100644 index 00000000000..e6a8ea08949 --- /dev/null +++ b/sys/lib/libz/Makefile.inc @@ -0,0 +1,71 @@ +# $OpenBSD: Makefile.inc,v 1.1 1997/02/06 02:56:48 downsj Exp $ +# $NetBSD: Makefile.inc,v 1.2 1997/01/23 22:29:09 cgd Exp $ +# +# Configuration variables (default values are below): +# +# S must be set to the top of the 'sys' tree. +# ZDST may be set to the location of the directory where library +# objects are to be built. Defaults to ${.OBJDIR}/lib/z. +# Z_AS may be set to 'obj' to build a object from the library's +# object files. (Otherwise, a library will be built.) +# Defaults to 'library'. +# ZMISCMAKEFLAGS +# Miscellaneous flags to be passed to the library's Makefile when +# building. See library's Makefile for more details about +# supported flags and their default values. + +# Default values: +ZDST?= ${.OBJDIR}/lib/z +Z_AS?= library + +ZDIR= $S/lib/libz +.if (${Z_AS} == "obj") +ZLIB= ${ZDST}/libz.o +ZLIB_PROF= ${ZDST}/libz.po +.else +ZLIB= ${ZDST}/libz.a +ZLIB_PROF= ${ZDST}/libz_p.a +.endif + +ZMAKE= \ + cd ${ZDIR} && MAKEOBJDIR=${ZDST} ${MAKE} \ + CC=${CC} CFLAGS=${CFLAGS} \ + AS=${AS} AFLAGS=${AFLAGS} \ + LD=${LD} STRIP=${STRIP} \ + MACHINE=${MACHINE} MACHINE_ARCH=${MACHINE_ARCH} \ + ZCPPFLAGS=${CPPFLAGS:S@^-I.@-I../../.@g} \ + ${ZMISCMAKEFLAGS} + +${ZLIB}: .NOTMAIN __always_make_zlib + @echo making sure the z library is up to date... +.if (${Z_AS} == "library") + @${ZMAKE} libz.a +.else + @${ZMAKE} libz.o +.endif + +${ZLIB_PROF}: .NOTMAIN __always_make_zlib + @echo making sure the profiled z library is up to date... +.if (${Z_AS} == "library") + @${ZMAKE} libz_p.a +.else + @${ZMAKE} libz.po +.endif + +clean:: .NOTMAIN cleanzlib +cleanzlib: .NOTMAIN __always_make_zlib + @echo cleaning the z library objects + @${ZMAKE} clean + +cleandir: .NOTMAIN cleandirzlib +cleandirzlib: .NOTMAIN __always_make_zlib + @echo cleandiring the z library objects + @${ZMAKE} cleandir + +depend:: .NOTMAIN dependzlib +dependzlib: .NOTMAIN __always_make_zlib + @echo depending the z library objects + @${ZMAKE} depend + +__always_make_zlib: .NOTMAIN + @mkdir -p ${ZDST} diff --git a/sys/lib/libz/adler32.c b/sys/lib/libz/adler32.c new file mode 100644 index 00000000000..3a16a40534d --- /dev/null +++ b/sys/lib/libz/adler32.c @@ -0,0 +1,48 @@ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* $Id: adler32.c,v 1.1 1997/02/06 02:56:49 downsj Exp $ */ + +#include "zlib.h" + +#define BASE 65521L /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* ========================================================================= */ +uLong adler32(adler, buf, len) + uLong adler; + const Bytef *buf; + uInt len; +{ + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int k; + + if (buf == Z_NULL) return 1L; + + while (len > 0) { + k = len < NMAX ? len : NMAX; + len -= k; + while (k >= 16) { + DO16(buf); + buf += 16; + k -= 16; + } + if (k != 0) do { + s1 += *buf++; + s2 += s1; + } while (--k); + s1 %= BASE; + s2 %= BASE; + } + return (s2 << 16) | s1; +} diff --git a/sys/lib/libz/crc32.c b/sys/lib/libz/crc32.c new file mode 100644 index 00000000000..fc8fb6a6b12 --- /dev/null +++ b/sys/lib/libz/crc32.c @@ -0,0 +1,162 @@ +/* crc32.c -- compute the CRC-32 of a data stream + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* $Id: crc32.c,v 1.1 1997/02/06 02:56:49 downsj Exp $ */ + +#include "zlib.h" + +#define local static + +#ifdef DYNAMIC_CRC_TABLE + +local int crc_table_empty = 1; +local uLongf crc_table[256]; +local void make_crc_table OF((void)); + +/* + Generate a table for a byte-wise 32-bit CRC calculation on the polynomial: + x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. + + Polynomials over GF(2) are represented in binary, one bit per coefficient, + with the lowest powers in the most significant bit. Then adding polynomials + is just exclusive-or, and multiplying a polynomial by x is a right shift by + one. If we call the above polynomial p, and represent a byte as the + polynomial q, also with the lowest power in the most significant bit (so the + byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, + where a mod b means the remainder after dividing a by b. + + This calculation is done using the shift-register method of multiplying and + taking the remainder. The register is initialized to zero, and for each + incoming bit, x^32 is added mod p to the register if the bit is a one (where + x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by + x (which is shifting right by one and adding x^32 mod p if the bit shifted + out is a one). We start with the highest power (least significant bit) of + q and repeat for all eight bits of q. + + The table is simply the CRC of all possible eight bit values. This is all + the information needed to generate CRC's on data a byte at a time for all + combinations of CRC register values and incoming bytes. +*/ +local void make_crc_table() +{ + uLong c; + int n, k; + uLong poly; /* polynomial exclusive-or pattern */ + /* terms of polynomial defining this crc (except x^32): */ + static Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* make exclusive-or pattern from polynomial (0xedb88320L) */ + poly = 0L; + for (n = 0; n < sizeof(p)/sizeof(Byte); n++) + poly |= 1L << (31 - p[n]); + + for (n = 0; n < 256; n++) + { + c = (uLong)n; + for (k = 0; k < 8; k++) + c = c & 1 ? poly ^ (c >> 1) : c >> 1; + crc_table[n] = c; + } + crc_table_empty = 0; +} +#else +/* ======================================================================== + * Table of CRC-32's of all single-byte values (made by make_crc_table) + */ +local uLongf crc_table[256] = { + 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, + 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, + 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, + 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL, + 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L, + 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L, + 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L, + 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL, + 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L, + 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL, + 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L, + 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L, + 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L, + 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL, + 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL, + 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L, + 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL, + 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L, + 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L, + 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L, + 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL, + 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L, + 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L, + 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL, + 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L, + 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L, + 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L, + 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L, + 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L, + 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL, + 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL, + 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L, + 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L, + 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL, + 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL, + 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L, + 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL, + 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L, + 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL, + 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L, + 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL, + 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L, + 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L, + 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL, + 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L, + 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L, + 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L, + 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L, + 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L, + 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L, + 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL, + 0x2d02ef8dL +}; +#endif + +/* ========================================================================= + * This function can be used by asm versions of crc32() + */ +uLongf *get_crc_table() +{ +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) make_crc_table(); +#endif + return (uLongf *)crc_table; +} + +/* ========================================================================= */ +#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); +#define DO2(buf) DO1(buf); DO1(buf); +#define DO4(buf) DO2(buf); DO2(buf); +#define DO8(buf) DO4(buf); DO4(buf); + +/* ========================================================================= */ +uLong crc32(crc, buf, len) + uLong crc; + const Bytef *buf; + uInt len; +{ + if (buf == Z_NULL) return 0L; +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif + crc = crc ^ 0xffffffffL; + while (len >= 8) + { + DO8(buf); + len -= 8; + } + if (len) do { + DO1(buf); + } while (--len); + return crc ^ 0xffffffffL; +} diff --git a/sys/lib/libz/infblock.c b/sys/lib/libz/infblock.c new file mode 100644 index 00000000000..cc2e6745a78 --- /dev/null +++ b/sys/lib/libz/infblock.c @@ -0,0 +1,402 @@ +/* infblock.c -- interpret and process block types to last block + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infblock.h" +#include "inftrees.h" +#include "infcodes.h" +#include "infutil.h" + +struct inflate_codes_state {int dummy;}; /* for buggy compilers */ + +/* Table for deflate from PKZIP's appnote.txt. */ +local uInt border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarily, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ + + +void inflate_blocks_reset(s, z, c) +inflate_blocks_statef *s; +z_streamp z; +uLongf *c; +{ + if (s->checkfn != Z_NULL) + *c = s->check; + if (s->mode == BTREE || s->mode == DTREE) + ZFREE(z, s->sub.trees.blens); + if (s->mode == CODES) + { + inflate_codes_free(s->sub.decode.codes, z); + inflate_trees_free(s->sub.decode.td, z); + inflate_trees_free(s->sub.decode.tl, z); + } + s->mode = TYPE; + s->bitk = 0; + s->bitb = 0; + s->read = s->write = s->window; + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0); + Trace((stderr, "inflate: blocks reset\n")); +} + + +inflate_blocks_statef *inflate_blocks_new(z, c, w) +z_streamp z; +check_func c; +uInt w; +{ + inflate_blocks_statef *s; + + if ((s = (inflate_blocks_statef *)ZALLOC + (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) + return s; + if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) + { + ZFREE(z, s); + return Z_NULL; + } + s->end = s->window + w; + s->checkfn = c; + s->mode = TYPE; + Trace((stderr, "inflate: blocks allocated\n")); + inflate_blocks_reset(s, z, &s->check); + return s; +} + + +#ifdef DEBUG + extern uInt inflate_hufts; +#endif +int inflate_blocks(s, z, r) +inflate_blocks_statef *s; +z_streamp z; +int r; +{ + uInt t; /* temporary storage */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input based on current state */ + while (1) switch (s->mode) + { + case TYPE: + NEEDBITS(3) + t = (uInt)b & 7; + s->last = t & 1; + switch (t >> 1) + { + case 0: /* stored */ + Trace((stderr, "inflate: stored block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + t = k & 7; /* go to byte boundary */ + DUMPBITS(t) + s->mode = LENS; /* get length of stored block */ + break; + case 1: /* fixed */ + Trace((stderr, "inflate: fixed codes block%s\n", + s->last ? " (last)" : "")); + { + uInt bl, bd; + inflate_huft *tl, *td; + + inflate_trees_fixed(&bl, &bd, &tl, &td); + s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); + if (s->sub.decode.codes == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.decode.tl = Z_NULL; /* don't try to free these */ + s->sub.decode.td = Z_NULL; + } + DUMPBITS(3) + s->mode = CODES; + break; + case 2: /* dynamic */ + Trace((stderr, "inflate: dynamic codes block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + s->mode = TABLE; + break; + case 3: /* illegal */ + DUMPBITS(3) + s->mode = BAD; + z->msg = (char*)"invalid block type"; + r = Z_DATA_ERROR; + LEAVE + } + break; + case LENS: + NEEDBITS(32) + if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) + { + s->mode = BAD; + z->msg = (char*)"invalid stored block lengths"; + r = Z_DATA_ERROR; + LEAVE + } + s->sub.left = (uInt)b & 0xffff; + b = k = 0; /* dump bits */ + Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); + s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); + break; + case STORED: + if (n == 0) + LEAVE + NEEDOUT + t = s->sub.left; + if (t > n) t = n; + if (t > m) t = m; + zmemcpy(q, p, t); + p += t; n -= t; + q += t; m -= t; + if ((s->sub.left -= t) != 0) + break; + Tracev((stderr, "inflate: stored end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + s->mode = s->last ? DRY : TYPE; + break; + case TABLE: + NEEDBITS(14) + s->sub.trees.table = t = (uInt)b & 0x3fff; +#ifndef PKZIP_BUG_WORKAROUND + if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) + { + s->mode = BAD; + z->msg = (char*)"too many length or distance symbols"; + r = Z_DATA_ERROR; + LEAVE + } +#endif + t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); + if (t < 19) + t = 19; + if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + DUMPBITS(14) + s->sub.trees.index = 0; + Tracev((stderr, "inflate: table sizes ok\n")); + s->mode = BTREE; + case BTREE: + while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) + { + NEEDBITS(3) + s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; + DUMPBITS(3) + } + while (s->sub.trees.index < 19) + s->sub.trees.blens[border[s->sub.trees.index++]] = 0; + s->sub.trees.bb = 7; + t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, + &s->sub.trees.tb, z); + if (t != Z_OK) + { + r = t; + if (r == Z_DATA_ERROR) + s->mode = BAD; + LEAVE + } + s->sub.trees.index = 0; + Tracev((stderr, "inflate: bits tree ok\n")); + s->mode = DTREE; + case DTREE: + while (t = s->sub.trees.table, + s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) + { + inflate_huft *h; + uInt i, j, c; + + t = s->sub.trees.bb; + NEEDBITS(t) + h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); + t = h->word.what.Bits; + c = h->more.Base; + if (c < 16) + { + DUMPBITS(t) + s->sub.trees.blens[s->sub.trees.index++] = c; + } + else /* c == 16..18 */ + { + i = c == 18 ? 7 : c - 14; + j = c == 18 ? 11 : 3; + NEEDBITS(t + i) + DUMPBITS(t) + j += (uInt)b & inflate_mask[i]; + DUMPBITS(i) + i = s->sub.trees.index; + t = s->sub.trees.table; + if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || + (c == 16 && i < 1)) + { + s->mode = BAD; + z->msg = (char*)"invalid bit length repeat"; + r = Z_DATA_ERROR; + LEAVE + } + c = c == 16 ? s->sub.trees.blens[i - 1] : 0; + do { + s->sub.trees.blens[i++] = c; + } while (--j); + s->sub.trees.index = i; + } + } + inflate_trees_free(s->sub.trees.tb, z); + s->sub.trees.tb = Z_NULL; + { + uInt bl, bd; + inflate_huft *tl, *td; + inflate_codes_statef *c; + + bl = 9; /* must be <= 9 for lookahead assumptions */ + bd = 6; /* must be <= 9 for lookahead assumptions */ + t = s->sub.trees.table; +#ifdef DEBUG + inflate_hufts = 0; +#endif + t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), + s->sub.trees.blens, &bl, &bd, &tl, &td, z); + if (t != Z_OK) + { + if (t == (uInt)Z_DATA_ERROR) + s->mode = BAD; + r = t; + LEAVE + } + Tracev((stderr, "inflate: trees ok, %d * %d bytes used\n", + inflate_hufts, sizeof(inflate_huft))); + if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) + { + inflate_trees_free(td, z); + inflate_trees_free(tl, z); + r = Z_MEM_ERROR; + LEAVE + } + ZFREE(z, s->sub.trees.blens); + s->sub.decode.codes = c; + s->sub.decode.tl = tl; + s->sub.decode.td = td; + } + s->mode = CODES; + case CODES: + UPDATE + if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) + return inflate_flush(s, z, r); + r = Z_OK; + inflate_codes_free(s->sub.decode.codes, z); + inflate_trees_free(s->sub.decode.td, z); + inflate_trees_free(s->sub.decode.tl, z); + LOAD + Tracev((stderr, "inflate: codes end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + if (!s->last) + { + s->mode = TYPE; + break; + } + if (k > 7) /* return unused byte, if any */ + { + Assert(k < 16, "inflate_codes grabbed too many bytes") + k -= 8; + n++; + p--; /* can always return one */ + } + s->mode = DRY; + case DRY: + FLUSH + if (s->read != s->write) + LEAVE + s->mode = DONE; + case DONE: + r = Z_STREAM_END; + LEAVE + case BAD: + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +int inflate_blocks_free(s, z, c) +inflate_blocks_statef *s; +z_streamp z; +uLongf *c; +{ + inflate_blocks_reset(s, z, c); + ZFREE(z, s->window); + ZFREE(z, s); + Trace((stderr, "inflate: blocks freed\n")); + return Z_OK; +} + + +void inflate_set_dictionary(s, d, n) +inflate_blocks_statef *s; +const Bytef *d; +uInt n; +{ + zmemcpy((charf *)s->window, d, n); + s->read = s->write = s->window + n; +} diff --git a/sys/lib/libz/infblock.h b/sys/lib/libz/infblock.h new file mode 100644 index 00000000000..3ecd50cd3a6 --- /dev/null +++ b/sys/lib/libz/infblock.h @@ -0,0 +1,37 @@ +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_blocks_state; +typedef struct inflate_blocks_state FAR inflate_blocks_statef; + +extern inflate_blocks_statef * inflate_blocks_new OF(( + z_streamp z, + check_func c, /* check function */ + uInt w)); /* window size */ + +extern int inflate_blocks OF(( + inflate_blocks_statef *, + z_streamp , + int)); /* initial return code */ + +extern void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_streamp , + uLongf *)); /* check value on output */ + +extern int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_streamp , + uLongf *)); /* check value on output */ + +extern void inflate_set_dictionary OF(( + inflate_blocks_statef *s, + const Bytef *d, /* dictionary */ + uInt n)); /* dictionary length */ diff --git a/sys/lib/libz/infcodes.c b/sys/lib/libz/infcodes.c new file mode 100644 index 00000000000..3ae3818a194 --- /dev/null +++ b/sys/lib/libz/infcodes.c @@ -0,0 +1,247 @@ +/* infcodes.c -- process literals and length/distance pairs + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "infblock.h" +#include "infcodes.h" +#include "infutil.h" +#include "inffast.h" + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + +/* inflate codes private state */ +struct inflate_codes_state { + + /* mode */ + enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + START, /* x: set up for LEN */ + LEN, /* i: get length/literal/eob next */ + LENEXT, /* i: getting length extra (have base) */ + DIST, /* i: get distance next */ + DISTEXT, /* i: getting distance extra */ + COPY, /* o: copying bytes in window, waiting for space */ + LIT, /* o: got literal, waiting for output space */ + WASH, /* o: got eob, possibly still output waiting */ + END, /* x: got eob and all data flushed */ + BADCODE} /* x: got error */ + mode; /* current inflate_codes mode */ + + /* mode dependent information */ + uInt len; + union { + struct { + inflate_huft *tree; /* pointer into tree */ + uInt need; /* bits needed */ + } code; /* if LEN or DIST, where in tree */ + uInt lit; /* if LIT, literal */ + struct { + uInt get; /* bits to get for extra */ + uInt dist; /* distance back to copy from */ + } copy; /* if EXT or COPY, where and how much */ + } sub; /* submode */ + + /* mode independent information */ + Byte lbits; /* ltree bits decoded per branch */ + Byte dbits; /* dtree bits decoder per branch */ + inflate_huft *ltree; /* literal/length/eob tree */ + inflate_huft *dtree; /* distance tree */ + +}; + + +inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) +uInt bl, bd; +inflate_huft *tl; +inflate_huft *td; /* need separate declaration for Borland C++ */ +z_streamp z; +{ + inflate_codes_statef *c; + + if ((c = (inflate_codes_statef *) + ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) + { + c->mode = START; + c->lbits = (Byte)bl; + c->dbits = (Byte)bd; + c->ltree = tl; + c->dtree = td; + Tracev((stderr, "inflate: codes new\n")); + } + return c; +} + + +int inflate_codes(s, z, r) +inflate_blocks_statef *s; +z_streamp z; +int r; +{ + uInt j; /* temporary storage */ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + Bytef *f; /* pointer to copy strings from */ + inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input and output based on current state */ + while (1) switch (c->mode) + { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + case START: /* x: set up for LEN */ +#ifndef SLOW + if (m >= 258 && n >= 10) + { + UPDATE + r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); + LOAD + if (r != Z_OK) + { + c->mode = r == Z_STREAM_END ? WASH : BADCODE; + break; + } + } +#endif /* !SLOW */ + c->sub.code.need = c->lbits; + c->sub.code.tree = c->ltree; + c->mode = LEN; + case LEN: /* i: get length/literal/eob next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e == 0) /* literal */ + { + c->sub.lit = t->base; + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", t->base)); + c->mode = LIT; + break; + } + if (e & 16) /* length */ + { + c->sub.copy.get = e & 15; + c->len = t->base; + c->mode = LENEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t->next; + break; + } + if (e & 32) /* end of block */ + { + Tracevv((stderr, "inflate: end of block\n")); + c->mode = WASH; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid literal/length code"; + r = Z_DATA_ERROR; + LEAVE + case LENEXT: /* i: getting length extra (have base) */ + j = c->sub.copy.get; + NEEDBITS(j) + c->len += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + c->sub.code.need = c->dbits; + c->sub.code.tree = c->dtree; + Tracevv((stderr, "inflate: length %u\n", c->len)); + c->mode = DIST; + case DIST: /* i: get distance next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e & 16) /* distance */ + { + c->sub.copy.get = e & 15; + c->sub.copy.dist = t->base; + c->mode = DISTEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t->next; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid distance code"; + r = Z_DATA_ERROR; + LEAVE + case DISTEXT: /* i: getting distance extra */ + j = c->sub.copy.get; + NEEDBITS(j) + c->sub.copy.dist += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); + c->mode = COPY; + case COPY: /* o: copying bytes in window, waiting for space */ +#ifndef __TURBOC__ /* Turbo C bug for following expression */ + f = (uInt)(q - s->window) < c->sub.copy.dist ? + s->end - (c->sub.copy.dist - (q - s->window)) : + q - c->sub.copy.dist; +#else + f = q - c->sub.copy.dist; + if ((uInt)(q - s->window) < c->sub.copy.dist) + f = s->end - (c->sub.copy.dist - (uInt)(q - s->window)); +#endif + while (c->len) + { + NEEDOUT + OUTBYTE(*f++) + if (f == s->end) + f = s->window; + c->len--; + } + c->mode = START; + break; + case LIT: /* o: got literal, waiting for output space */ + NEEDOUT + OUTBYTE(c->sub.lit) + c->mode = START; + break; + case WASH: /* o: got eob, possibly more output */ + FLUSH + if (s->read != s->write) + LEAVE + c->mode = END; + case END: + r = Z_STREAM_END; + LEAVE + case BADCODE: /* x: got error */ + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +void inflate_codes_free(c, z) +inflate_codes_statef *c; +z_streamp z; +{ + ZFREE(z, c); + Tracev((stderr, "inflate: codes free\n")); +} diff --git a/sys/lib/libz/infcodes.h b/sys/lib/libz/infcodes.h new file mode 100644 index 00000000000..c2c38df2c06 --- /dev/null +++ b/sys/lib/libz/infcodes.h @@ -0,0 +1,27 @@ +/* infcodes.h -- header to use infcodes.c + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_codes_state; +typedef struct inflate_codes_state FAR inflate_codes_statef; + +extern inflate_codes_statef *inflate_codes_new OF(( + uInt, uInt, + inflate_huft *, inflate_huft *, + z_streamp )); + +extern int inflate_codes OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +extern void inflate_codes_free OF(( + inflate_codes_statef *, + z_streamp )); + diff --git a/sys/lib/libz/inffast.c b/sys/lib/libz/inffast.c new file mode 100644 index 00000000000..86eee4a2992 --- /dev/null +++ b/sys/lib/libz/inffast.c @@ -0,0 +1,168 @@ +/* inffast.c -- process literals and length/distance pairs fast + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "infblock.h" +#include "infcodes.h" +#include "infutil.h" +#include "inffast.h" + +struct inflate_codes_state {int dummy;}; /* for buggy compilers */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + +/* macros for bit input with no checking and for returning unused bytes */ +#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}} +#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;} + +/* Called with number of bytes left to write in window at least 258 + (the maximum string length) and number of input bytes available + at least ten. The ten bytes are six bytes for the longest length/ + distance pair plus four bytes for overloading the bit buffer. */ + +int inflate_fast(bl, bd, tl, td, s, z) +uInt bl, bd; +inflate_huft *tl; +inflate_huft *td; /* need separate declaration for Borland C++ */ +inflate_blocks_statef *s; +z_streamp z; +{ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + uInt ml; /* mask for literal/length tree */ + uInt md; /* mask for distance tree */ + uInt c; /* bytes to copy */ + uInt d; /* distance back to copy from */ + Bytef *r; /* copy source pointer */ + + /* load input, output, bit values */ + LOAD + + /* initialize masks */ + ml = inflate_mask[bl]; + md = inflate_mask[bd]; + + /* do until not enough input or output space for fast loop */ + do { /* assume called with m >= 258 && n >= 10 */ + /* get literal/length code */ + GRABBITS(20) /* max bits for literal/length code */ + if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + continue; + } + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits for length */ + e &= 15; + c = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * length %u\n", c)); + + /* decode distance base of block to copy */ + GRABBITS(15); /* max bits for distance code */ + e = (t = td + ((uInt)b & md))->exop; + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits to add to distance base */ + e &= 15; + GRABBITS(e) /* get extra bits (up to 13) */ + d = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * distance %u\n", d)); + + /* do the copy */ + m -= c; + if ((uInt)(q - s->window) >= d) /* offset before dest */ + { /* just copy */ + r = q - d; + *q++ = *r++; c--; /* minimum count is three, */ + *q++ = *r++; c--; /* so unroll loop a little */ + } + else /* else offset after destination */ + { + e = d - (uInt)(q - s->window); /* bytes from offset to end */ + r = s->end - e; /* pointer to offset */ + if (c > e) /* if source crosses, */ + { + c -= e; /* copy to end of window */ + do { + *q++ = *r++; + } while (--e); + r = s->window; /* copy rest from start of window */ + } + } + do { /* copy all or what's left */ + *q++ = *r++; + } while (--c); + break; + } + else if ((e & 64) == 0) + e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; + else + { + z->msg = (char*)"invalid distance code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + break; + } + if ((e & 64) == 0) + { + if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + break; + } + } + else if (e & 32) + { + Tracevv((stderr, "inflate: * end of block\n")); + UNGRAB + UPDATE + return Z_STREAM_END; + } + else + { + z->msg = (char*)"invalid literal/length code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + } while (m >= 258 && n >= 10); + + /* not enough input or output--restore pointers and return */ + UNGRAB + UPDATE + return Z_OK; +} diff --git a/sys/lib/libz/inffast.h b/sys/lib/libz/inffast.h new file mode 100644 index 00000000000..8cc644efb1f --- /dev/null +++ b/sys/lib/libz/inffast.h @@ -0,0 +1,17 @@ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +extern int inflate_fast OF(( + uInt, + uInt, + inflate_huft *, + inflate_huft *, + inflate_blocks_statef *, + z_streamp )); diff --git a/sys/lib/libz/inflate.c b/sys/lib/libz/inflate.c new file mode 100644 index 00000000000..74cc69c8684 --- /dev/null +++ b/sys/lib/libz/inflate.c @@ -0,0 +1,345 @@ +/* inflate.c -- zlib interface to inflate modules + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infblock.h" + +struct inflate_blocks_state {int dummy;}; /* for buggy compilers */ + +/* inflate private state */ +struct internal_state { + + /* mode */ + enum { + METHOD, /* waiting for method byte */ + FLAG, /* waiting for flag byte */ + DICT4, /* four dictionary check bytes to go */ + DICT3, /* three dictionary check bytes to go */ + DICT2, /* two dictionary check bytes to go */ + DICT1, /* one dictionary check byte to go */ + DICT0, /* waiting for inflateSetDictionary */ + BLOCKS, /* decompressing blocks */ + CHECK4, /* four check bytes to go */ + CHECK3, /* three check bytes to go */ + CHECK2, /* two check bytes to go */ + CHECK1, /* one check byte to go */ + DONE, /* finished check, done */ + BAD} /* got an error--stay here */ + mode; /* current inflate mode */ + + /* mode dependent information */ + union { + uInt method; /* if FLAGS, method byte */ + struct { + uLong was; /* computed check value */ + uLong need; /* stream check value */ + } check; /* if CHECK, check values to compare */ + uInt marker; /* if BAD, inflateSync's marker bytes count */ + } sub; /* submode */ + + /* mode independent information */ + int nowrap; /* flag for no wrapper */ + uInt wbits; /* log2(window size) (8..15, defaults to 15) */ + inflate_blocks_statef + *blocks; /* current inflate_blocks state */ + +}; + + +int inflateReset(z) +z_streamp z; +{ + uLong c; + + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + z->total_in = z->total_out = 0; + z->msg = Z_NULL; + z->state->mode = z->state->nowrap ? BLOCKS : METHOD; + inflate_blocks_reset(z->state->blocks, z, &c); + Trace((stderr, "inflate: reset\n")); + return Z_OK; +} + + +int inflateEnd(z) +z_streamp z; +{ + uLong c; + + if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->blocks != Z_NULL) + inflate_blocks_free(z->state->blocks, z, &c); + ZFREE(z, z->state); + z->state = Z_NULL; + Trace((stderr, "inflate: end\n")); + return Z_OK; +} + + +int inflateInit2_(z, w, version, stream_size) +z_streamp z; +int w; +const char *version; +int stream_size; +{ + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != sizeof(z_stream)) + return Z_VERSION_ERROR; + + /* initialize state */ + if (z == Z_NULL) + return Z_STREAM_ERROR; + z->msg = Z_NULL; + if (z->zalloc == Z_NULL) + { + z->zalloc = zcalloc; + z->opaque = (voidpf)0; + } + if (z->zfree == Z_NULL) z->zfree = zcfree; + if ((z->state = (struct internal_state FAR *) + ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) + return Z_MEM_ERROR; + z->state->blocks = Z_NULL; + + /* handle undocumented nowrap option (no zlib header or check) */ + z->state->nowrap = 0; + if (w < 0) + { + w = - w; + z->state->nowrap = 1; + } + + /* set window size */ + if (w < 8 || w > 15) + { + inflateEnd(z); + return Z_STREAM_ERROR; + } + z->state->wbits = (uInt)w; + + /* create inflate_blocks state */ + if ((z->state->blocks = + inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) + == Z_NULL) + { + inflateEnd(z); + return Z_MEM_ERROR; + } + Trace((stderr, "inflate: allocated\n")); + + /* reset state */ + inflateReset(z); + return Z_OK; +} + + +int inflateInit_(z, version, stream_size) +z_streamp z; +const char *version; +int stream_size; +{ + return inflateInit2_(z, DEF_WBITS, version, stream_size); +} + + +#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;} +#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) + +int inflate(z, f) +z_streamp z; +int f; +{ + int r; + uInt b; + + if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0) + return Z_STREAM_ERROR; + r = Z_BUF_ERROR; + while (1) switch (z->state->mode) + { + case METHOD: + NEEDBYTE + if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED) + { + z->state->mode = BAD; + z->msg = (char*)"unknown compression method"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if ((z->state->sub.method >> 4) + 8 > z->state->wbits) + { + z->state->mode = BAD; + z->msg = (char*)"invalid window size"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + z->state->mode = FLAG; + case FLAG: + NEEDBYTE + b = NEXTBYTE; + if (((z->state->sub.method << 8) + b) % 31) + { + z->state->mode = BAD; + z->msg = (char*)"incorrect header check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Trace((stderr, "inflate: zlib header ok\n")); + if (!(b & PRESET_DICT)) + { + z->state->mode = BLOCKS; + break; + } + z->state->mode = DICT4; + case DICT4: + NEEDBYTE + z->state->sub.check.need = (uLong)NEXTBYTE << 24; + z->state->mode = DICT3; + case DICT3: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 16; + z->state->mode = DICT2; + case DICT2: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 8; + z->state->mode = DICT1; + case DICT1: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE; + z->adler = z->state->sub.check.need; + z->state->mode = DICT0; + return Z_NEED_DICT; + case DICT0: + z->state->mode = BAD; + z->msg = (char*)"need dictionary"; + z->state->sub.marker = 0; /* can try inflateSync */ + return Z_STREAM_ERROR; + case BLOCKS: + r = inflate_blocks(z->state->blocks, z, r); + if (r == Z_DATA_ERROR) + { + z->state->mode = BAD; + z->state->sub.marker = 0; /* can try inflateSync */ + break; + } + if (r != Z_STREAM_END) + return r; + r = Z_OK; + inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); + if (z->state->nowrap) + { + z->state->mode = DONE; + break; + } + z->state->mode = CHECK4; + case CHECK4: + NEEDBYTE + z->state->sub.check.need = (uLong)NEXTBYTE << 24; + z->state->mode = CHECK3; + case CHECK3: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 16; + z->state->mode = CHECK2; + case CHECK2: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 8; + z->state->mode = CHECK1; + case CHECK1: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE; + + if (z->state->sub.check.was != z->state->sub.check.need) + { + z->state->mode = BAD; + z->msg = (char*)"incorrect data check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Trace((stderr, "inflate: zlib check ok\n")); + z->state->mode = DONE; + case DONE: + return Z_STREAM_END; + case BAD: + return Z_DATA_ERROR; + default: + return Z_STREAM_ERROR; + } +} + + +int inflateSetDictionary(z, dictionary, dictLength) +z_streamp z; +const Bytef *dictionary; +uInt dictLength; +{ + uInt length = dictLength; + + if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0) + return Z_STREAM_ERROR; + + if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; + z->adler = 1L; + + if (length >= ((uInt)1<<z->state->wbits)) + { + length = (1<<z->state->wbits)-1; + dictionary += dictLength - length; + } + inflate_set_dictionary(z->state->blocks, dictionary, length); + z->state->mode = BLOCKS; + return Z_OK; +} + + +int inflateSync(z) +z_streamp z; +{ + uInt n; /* number of bytes to look at */ + Bytef *p; /* pointer to bytes */ + uInt m; /* number of marker bytes found in a row */ + uLong r, w; /* temporaries to save total_in and total_out */ + + /* set up */ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->mode != BAD) + { + z->state->mode = BAD; + z->state->sub.marker = 0; + } + if ((n = z->avail_in) == 0) + return Z_BUF_ERROR; + p = z->next_in; + m = z->state->sub.marker; + + /* search */ + while (n && m < 4) + { + if (*p == (Byte)(m < 2 ? 0 : 0xff)) + m++; + else if (*p) + m = 0; + else + m = 4 - m; + p++, n--; + } + + /* restore */ + z->total_in += p - z->next_in; + z->next_in = p; + z->avail_in = n; + z->state->sub.marker = m; + + /* return no joy or set up to restart on a new block */ + if (m != 4) + return Z_DATA_ERROR; + r = z->total_in; w = z->total_out; + inflateReset(z); + z->total_in = r; z->total_out = w; + z->state->mode = BLOCKS; + return Z_OK; +} diff --git a/sys/lib/libz/inftrees.c b/sys/lib/libz/inftrees.c new file mode 100644 index 00000000000..90205bd1e57 --- /dev/null +++ b/sys/lib/libz/inftrees.c @@ -0,0 +1,470 @@ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" + +char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ +struct internal_state {int dummy;}; /* for buggy compilers */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + + +local int huft_build OF(( + uIntf *, /* code lengths in bits */ + uInt, /* number of codes */ + uInt, /* number of "simple" codes */ + uIntf *, /* list of base values for non-simple codes */ + uIntf *, /* list of extra bits for non-simple codes */ + inflate_huft * FAR*,/* result: starting table */ + uIntf *, /* maximum lookup bits (returns actual) */ + z_streamp )); /* for zalloc function */ + +local voidpf falloc OF(( + voidpf, /* opaque pointer (not used) */ + uInt, /* number of items */ + uInt)); /* size of item */ + +/* Tables for deflate from PKZIP's appnote.txt. */ +local uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* actually lengths - 2; also see note #13 above about 258 */ +local uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */ +local uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +local uInt cpdext[30] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ +#define BMAX 15 /* maximum bit length of any code */ +#define N_MAX 288 /* maximum number of codes in any set */ + +#ifdef DEBUG + uInt inflate_hufts; +#endif + +local int huft_build(b, n, s, d, e, t, m, zs) +uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ +uInt n; /* number of codes (assumed <= N_MAX) */ +uInt s; /* number of simple-valued codes (0..s-1) */ +uIntf *d; /* list of base values for non-simple codes */ +uIntf *e; /* list of extra bits for non-simple codes */ +inflate_huft * FAR *t; /* result: starting table */ +uIntf *m; /* maximum lookup bits, returns actual */ +z_streamp zs; /* for zalloc function */ +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR + if the given code set is incomplete (the tables are still built in this + case), Z_DATA_ERROR if the input is invalid (all zero length codes or an + over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ +{ + + uInt a; /* counter for codes of length k */ + uInt c[BMAX+1]; /* bit length count table */ + uInt f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register uInt i; /* counter, current code */ + register uInt j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + register uIntf *p; /* pointer into c[], b[], or v[] */ + inflate_huft *q; /* points to current table */ + struct inflate_huft_s r; /* table entry for structure assignment */ + inflate_huft *u[BMAX]; /* table stack */ + uInt v[N_MAX]; /* values in order of bit length */ + register int w; /* bits before this table == (l * h) */ + uInt x[BMAX+1]; /* bit offsets, then code stack */ + uIntf *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + uInt z; /* number of entries in current table */ + + + /* Generate counts for each bit length */ + p = c; +#define C0 *p++ = 0; +#define C2 C0 C0 C0 C0 +#define C4 C2 C2 C2 C2 + C4 /* clear c[]--assume BMAX+1 is 16 */ + p = b; i = n; + do { + c[*p++]++; /* assume all entries <= BMAX */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (inflate_huft *)Z_NULL; + *m = 0; + return Z_OK; + } + + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((uInt)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((uInt)l > i) + l = i; + *m = l; + + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return Z_DATA_ERROR; + if ((y -= c[i]) < 0) + return Z_DATA_ERROR; + c[i] += y; + + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ + q = (inflate_huft *)Z_NULL; /* ditto */ + z = 0; /* ditto */ + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { + a = c[k]; + while (a--) + { + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = g - w; + z = z > (uInt)l ? l : z; /* table size upper limit */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + if (j < z) + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } + z = 1 << j; /* table entries for j-bit table */ + + /* allocate and link in new table */ + if ((q = (inflate_huft *)ZALLOC + (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) + { + if (h) + inflate_trees_free(u[0], zs); + return Z_MEM_ERROR; /* not enough memory */ + } +#ifdef DEBUG + inflate_hufts += z + 1; +#endif + *t = q + 1; /* link to list for huft_free() */ + *(t = &(q->next)) = Z_NULL; + u[h] = ++q; /* table starts after link */ + + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.bits = (Byte)l; /* bits to dump before this table */ + r.exop = (Byte)j; /* bits in this table */ + r.next = q; /* pointer to this table */ + j = i >> (w - l); /* (get around Turbo C bug) */ + u[h-1][j] = r; /* connect to last table */ + } + } + + /* set up table entry in r */ + r.bits = (Byte)(k - w); + if (p >= v + n) + r.exop = 128 + 64; /* out of values--invalid code */ + else if (*p < s) + { + r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ + r.base = *p++; /* simple code is just the value */ + } + else + { + r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ + r.base = d[*p++ - s]; + } + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + while ((i & ((1 << w) - 1)) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + } + } + } + + + /* Return Z_BUF_ERROR if we were given an incomplete table */ + return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; +} + + +int inflate_trees_bits(c, bb, tb, z) +uIntf *c; /* 19 code lengths */ +uIntf *bb; /* bits tree desired/actual depth */ +inflate_huft * FAR *tb; /* bits tree result */ +z_streamp z; /* for zfree function */ +{ + int r; + + r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed dynamic bit lengths tree"; + else if (r == Z_BUF_ERROR) + { + inflate_trees_free(*tb, z); + z->msg = (char*)"incomplete dynamic bit lengths tree"; + r = Z_DATA_ERROR; + } + return r; +} + + +int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) +uInt nl; /* number of literal/length codes */ +uInt nd; /* number of distance codes */ +uIntf *c; /* that many (total) code lengths */ +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +z_streamp z; /* for zfree function */ +{ + int r; + + /* build literal/length tree */ + if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed literal/length tree"; + else if (r == Z_BUF_ERROR) + { + inflate_trees_free(*tl, z); + z->msg = (char*)"incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + return r; + } + + /* build distance tree */ + if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed literal/length tree"; + else if (r == Z_BUF_ERROR) { +#ifdef PKZIP_BUG_WORKAROUND + r = Z_OK; + } +#else + inflate_trees_free(*td, z); + z->msg = (char*)"incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + inflate_trees_free(*tl, z); + return r; +#endif + } + + /* done */ + return Z_OK; +} + + +/* build fixed tables only once--keep them here */ +local int fixed_built = 0; +#define FIXEDH 530 /* number of hufts used by fixed tables */ +local inflate_huft fixed_mem[FIXEDH]; +local uInt fixed_bl; +local uInt fixed_bd; +local inflate_huft *fixed_tl; +local inflate_huft *fixed_td; + + +local voidpf falloc(q, n, s) +voidpf q; /* opaque pointer */ +uInt n; /* number of items */ +uInt s; /* size of item */ +{ + Assert(s == sizeof(inflate_huft) && n <= *(intf *)q, + "inflate_trees falloc overflow"); + *(intf *)q -= n+s-s; /* s-s to avoid warning */ + return (voidpf)(fixed_mem + *(intf *)q); +} + + +int inflate_trees_fixed(bl, bd, tl, td) +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +{ + /* build fixed tables if not already (multiple overlapped executions ok) */ + if (!fixed_built) + { + int k; /* temporary variable */ + unsigned c[288]; /* length list for huft_build */ + z_stream z; /* for falloc function */ + int f = FIXEDH; /* number of hufts left in fixed_mem */ + + /* set up fake z_stream for memory routines */ + z.zalloc = falloc; + z.zfree = Z_NULL; + z.opaque = (voidpf)&f; + + /* literal table */ + for (k = 0; k < 144; k++) + c[k] = 8; + for (; k < 256; k++) + c[k] = 9; + for (; k < 280; k++) + c[k] = 7; + for (; k < 288; k++) + c[k] = 8; + fixed_bl = 7; + huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); + + /* distance table */ + for (k = 0; k < 30; k++) + c[k] = 5; + fixed_bd = 5; + huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); + + /* done */ + Assert(f == 0, "invalid build of fixed tables"); + fixed_built = 1; + } + *bl = fixed_bl; + *bd = fixed_bd; + *tl = fixed_tl; + *td = fixed_td; + return Z_OK; +} + + +int inflate_trees_free(t, z) +inflate_huft *t; /* table to free */ +z_streamp z; /* for zfree function */ +/* Free the malloc'ed tables built by huft_build(), which makes a linked + list of the tables it made, with the links in a dummy first entry of + each table. */ +{ + register inflate_huft *p, *q, *r; + + /* Reverse linked list */ + p = Z_NULL; + q = t; + while (q != Z_NULL) + { + r = (q - 1)->next; + (q - 1)->next = p; + p = q; + q = r; + } + /* Go through linked list, freeing from the malloced (t[-1]) address. */ + while (p != Z_NULL) + { + q = (--p)->next; + ZFREE(z,p); + p = q; + } + return Z_OK; +} diff --git a/sys/lib/libz/inftrees.h b/sys/lib/libz/inftrees.h new file mode 100644 index 00000000000..b06613ddd3f --- /dev/null +++ b/sys/lib/libz/inftrees.h @@ -0,0 +1,59 @@ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). */ + +typedef struct inflate_huft_s FAR inflate_huft; + +struct inflate_huft_s { + union { + struct { + Byte Exop; /* number of extra bits or operation */ + Byte Bits; /* number of bits in this code or subcode */ + } what; + Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ + } word; /* 16-bit, 8 bytes for 32-bit machines) */ + union { + uInt Base; /* literal, length base, or distance base */ + inflate_huft *Next; /* pointer to next level of table */ + } more; +}; + +#ifdef DEBUG + extern uInt inflate_hufts; +#endif + +extern int inflate_trees_bits OF(( + uIntf *, /* 19 code lengths */ + uIntf *, /* bits tree desired/actual depth */ + inflate_huft * FAR *, /* bits tree result */ + z_streamp )); /* for zalloc, zfree functions */ + +extern int inflate_trees_dynamic OF(( + uInt, /* number of literal/length codes */ + uInt, /* number of distance codes */ + uIntf *, /* that many (total) code lengths */ + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *, /* distance tree result */ + z_streamp )); /* for zalloc, zfree functions */ + +extern int inflate_trees_fixed OF(( + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *)); /* distance tree result */ + +extern int inflate_trees_free OF(( + inflate_huft *, /* tables to free */ + z_streamp )); /* for zfree function */ + diff --git a/sys/lib/libz/infutil.c b/sys/lib/libz/infutil.c new file mode 100644 index 00000000000..eb21199c350 --- /dev/null +++ b/sys/lib/libz/infutil.c @@ -0,0 +1,87 @@ +/* inflate_util.c -- data and routines common to blocks and codes + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infblock.h" +#include "inftrees.h" +#include "infcodes.h" +#include "infutil.h" + +struct inflate_codes_state {int dummy;}; /* for buggy compilers */ + +/* And'ing with mask[n] masks the lower n bits */ +uInt inflate_mask[17] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + + +/* copy as much as possible from the sliding window to the output area */ +int inflate_flush(s, z, r) +inflate_blocks_statef *s; +z_streamp z; +int r; +{ + uInt n; + Bytef *p; + Bytef *q; + + /* local copies of source and destination pointers */ + p = z->next_out; + q = s->read; + + /* compute number of bytes to copy as far as end of window */ + n = (uInt)((q <= s->write ? s->write : s->end) - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy as far as end of window */ + zmemcpy(p, q, n); + p += n; + q += n; + + /* see if more to copy at beginning of window */ + if (q == s->end) + { + /* wrap pointers */ + q = s->window; + if (s->write == s->end) + s->write = s->window; + + /* compute bytes to copy */ + n = (uInt)(s->write - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy */ + zmemcpy(p, q, n); + p += n; + q += n; + } + + /* update pointers */ + z->next_out = p; + s->read = q; + + /* done */ + return r; +} diff --git a/sys/lib/libz/infutil.h b/sys/lib/libz/infutil.h new file mode 100644 index 00000000000..702cd290c37 --- /dev/null +++ b/sys/lib/libz/infutil.h @@ -0,0 +1,99 @@ +/* infutil.h -- types and macros common to blocks and codes + * Copyright (C) 1995-1996 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +#ifndef _INFUTIL_H +#define _INFUTIL_H + +typedef enum { + TYPE, /* get type bits (3, including end bit) */ + LENS, /* get lengths for stored */ + STORED, /* processing stored block */ + TABLE, /* get table lengths */ + BTREE, /* get bit lengths tree for a dynamic block */ + DTREE, /* get length, distance trees for a dynamic block */ + CODES, /* processing fixed or dynamic block */ + DRY, /* output remaining window bytes */ + DONE, /* finished last block, done */ + BAD} /* got a data error--stuck here */ +inflate_block_mode; + +/* inflate blocks semi-private state */ +struct inflate_blocks_state { + + /* mode */ + inflate_block_mode mode; /* current inflate_block mode */ + + /* mode dependent information */ + union { + uInt left; /* if STORED, bytes left to copy */ + struct { + uInt table; /* table lengths (14 bits) */ + uInt index; /* index into blens (or border) */ + uIntf *blens; /* bit lengths of codes */ + uInt bb; /* bit length tree depth */ + inflate_huft *tb; /* bit length decoding tree */ + } trees; /* if DTREE, decoding info for trees */ + struct { + inflate_huft *tl; + inflate_huft *td; /* trees to free */ + inflate_codes_statef + *codes; + } decode; /* if CODES, current state */ + } sub; /* submode */ + uInt last; /* true if this block is the last block */ + + /* mode independent information */ + uInt bitk; /* bits in bit buffer */ + uLong bitb; /* bit buffer */ + Bytef *window; /* sliding window */ + Bytef *end; /* one byte after sliding window */ + Bytef *read; /* window read pointer */ + Bytef *write; /* window write pointer */ + check_func checkfn; /* check function */ + uLong check; /* check on output */ + +}; + + +/* defines for inflate input/output */ +/* update pointers and return */ +#define UPDBITS {s->bitb=b;s->bitk=k;} +#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} +#define UPDOUT {s->write=q;} +#define UPDATE {UPDBITS UPDIN UPDOUT} +#define LEAVE {UPDATE return inflate_flush(s,z,r);} +/* get bytes and bits */ +#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} +#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} +#define NEXTBYTE (n--,*p++) +#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}} +#define DUMPBITS(j) {b>>=(j);k-=(j);} +/* output bytes */ +#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q) +#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} +#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} +#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} +#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} +#define OUTBYTE(a) {*q++=(Byte)(a);m--;} +/* load local pointers */ +#define LOAD {LOADIN LOADOUT} + +/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ +extern uInt inflate_mask[17]; + +/* copy as much as possible from the sliding window to the output area */ +extern int inflate_flush OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +struct internal_state {int dummy;}; /* for buggy compilers */ + +#endif diff --git a/sys/lib/libz/zconf.h b/sys/lib/libz/zconf.h new file mode 100644 index 00000000000..e574a7d4a1a --- /dev/null +++ b/sys/lib/libz/zconf.h @@ -0,0 +1,184 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-1996 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* $Id: zconf.h,v 1.1 1997/02/06 02:56:55 downsj Exp $ */ + +#ifndef _ZCONF_H +#define _ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + */ +#ifdef Z_PREFIX +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateReset z_inflateReset +# define compress z_compress +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table + +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) +# define WIN32 +#endif +#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386) +# ifndef __32BIT__ +# define __32BIT__ +# endif +#endif +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#if defined(MSDOS) && !defined(__32BIT__) +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC) +# define STDC +#endif +#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC) +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + 1 << (windowBits+2) + 1 << (memLevel+9) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR __far +# else +# define FAR far +# endif +#endif +#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__)) +# ifndef __32BIT__ +# define SMALL_MEDIUM +# define FAR __far +# endif +#endif +#ifndef FAR +# define FAR +#endif + +typedef unsigned char Byte; /* 8 bits */ +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#if defined(__BORLANDC__) && defined(SMALL_MEDIUM) + /* Borland C/C++ ignores FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + + +/* Compile with -DZLIB_DLL for Windows DLL support */ +#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL) +# include <windows.h> +# define EXPORT WINAPI +#else +# define EXPORT +#endif + +#endif /* _ZCONF_H */ diff --git a/sys/lib/libz/zlib.h b/sys/lib/libz/zlib.h new file mode 100644 index 00000000000..337fe9fe8a3 --- /dev/null +++ b/sys/lib/libz/zlib.h @@ -0,0 +1,780 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.0.4, Jul 24th, 1996. + + Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + gzip@prep.ai.mit.edu madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef _ZLIB_H +#define _ZLIB_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "zconf.h" + +#define ZLIB_VERSION "1.0.4" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms may be added later and will have the same + stream interface. + + For compression the application must provide the output buffer and + may optionally provide the input buffer for optimization. For decompression, + the application must provide the input buffer and may optionally provide + the output buffer for optimization. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The library does not install any signal handler. It is recommended to + add at least a handler for SIGSEGV when decompressing; the library checks + the consistency of the input data whenever possible but may go nuts + for some forms of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: ascii or binary */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +/* Allowed flush values; see deflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Possible values of the data_type field */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +extern const char * EXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +extern int EXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +extern int EXPORT deflate OF((z_streamp strm, int flush)); +/* + Performs one or both of the following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression + block is terminated and flushed to the output buffer so that the + decompressor can get all input data available so far. For method 9, a future + variant on method 8, the current block will be flushed but not terminated. + Z_SYNC_FLUSH has the same effect as partial flush except that the compressed + output is byte aligned (the compressor can clear its internal bit buffer) + and the current block is always terminated; this can be useful if the + compressor has to be restarted from scratch after an interruption (in which + case the internal state of the compressor may be lost). + If flush is set to Z_FULL_FLUSH, the compression block is terminated, a + special marker is output and the compression dictionary is discarded; this + is useful to allow the decompressor to synchronize if one compressed block + has been damaged (see inflateSync below). Flushing degrades compression and + so should be used only when necessary. Using Z_FULL_FLUSH too often can + seriously degrade the compression. If deflate returns with avail_out == 0, + this function must be called again with the same value of the flush + parameter and more output space (updated avail_out), until the flush is + complete (deflate returns with non-zero avail_out). + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible. +*/ + + +extern int EXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +extern int EXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, inflateInit updates them to use default + allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_VERSION_ERROR if the zlib library version is incompatible + with the version assumed by the caller. msg is set to null if there is no + error message. inflateInit does not perform any decompression: this will be + done by inflate(). +*/ + + +extern int EXPORT inflate OF((z_streamp strm, int flush)); +/* + Performs one or both of the following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much + output as possible to the output buffer. The flushing behavior of inflate is + not specified for values of the flush parameter other than Z_PARTIAL_FLUSH + and Z_FINISH, but the current implementation actually flushes as much output + as possible anyway. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + inflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if the end of the + compressed data has been reached and all uncompressed output has been + produced, Z_NEED_DICT if a preset dictionary is needed at this point (see + inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted, + Z_STREAM_ERROR if the stream structure was inconsistent (for example if + next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in + the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the + application may then call inflateSync to look for a good compression block. + In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the + dictionary chosen by the compressor. +*/ + + +extern int EXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +extern int EXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. (Method 9 will allow a 64K history buffer and + partial block flushes.) + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library (the value 16 will be allowed for method 9). Larger + values of this parameter result in better compression at the expense of + memory usage. The default value is 15 if deflateInit is used instead. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match). Filtered data consists mostly of small values with a + somewhat random distribution. In this case, the compression algorithm is + tuned to compress them better. The effect of Z_FILTERED is to force more + Huffman coding and less string matching; it is somewhat intermediate + between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects + the compression ratio but not the correctness of the compressed output even + if it is not set appropriately. + + If next_in is not null, the library will use this buffer to hold also + some history information; the buffer must either hold the entire input + data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in + is null, the library will allocate its own history buffer (and leave next_in + null). next_out need not be provided here but must be provided by the + application for the next call of deflate(). + + If the history buffer is provided by the application, next_in must + must never be changed by the application since the compressor maintains + information inside this buffer from call to call; the application + must provide more input only by increasing avail_in. next_in is always + reset by the library in this case. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was + not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as + an invalid method). msg is set to null if there is no error message. + deflateInit2 does not perform any compression: this will be done by + deflate(). +*/ + +extern int EXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary (history buffer) from the given + byte sequence without producing any compressed output. This function must + be called immediately after deflateInit or deflateInit2, before any call + of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and + can be predicted with good accuracy; the data can then be compressed better + than with the default empty dictionary. In this version of the library, + only the last 32K bytes of the dictionary are used. + Upon return of this function, strm->adler is set to the Adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state + is inconsistent (for example if deflate has already been called for this + stream). deflateSetDictionary does not perform any compression: this will + be done by deflate(). +*/ + +extern int EXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. If + the source stream is using an application-supplied history buffer, a new + buffer is allocated for the destination stream. The compressed output + buffer is always application-supplied. It's the responsibility of the + application to provide the correct values of next_out and avail_out for the + next call of deflate. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +extern int EXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy)); +/* + Dynamically update the compression level and compression strategy. + This can be used to switch between compression and straight copy of + the input data, or to switch to a different kind of input data requiring + a different strategy. If the compression level is changed, the input + available so far is compressed with the old level (and may be flushed); + the new level will take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +/* +extern int EXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with more compression options. The + fields next_out, zalloc, zfree and opaque must be initialized before by + the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library (the value 16 will be allowed soon). The + default value is 15 if inflateInit is used instead. If a compressed stream + with a larger window size is given as input, inflate() will return with + the error code Z_DATA_ERROR instead of trying to allocate a larger window. + + If next_out is not null, the library will use this buffer for the history + buffer; the buffer must either be large enough to hold the entire output + data, or have at least 1<<windowBits bytes. If next_out is null, the + library will allocate its own buffer (and leave next_out null). next_in + need not be provided here but must be provided by the application for the + next call of inflate(). + + If the history buffer is provided by the application, next_out must + never be changed by the application since the decompressor maintains + history information inside this buffer from call to call; the application + can only reset next_out to the beginning of the history buffer when + avail_out is zero and all output has been consumed. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was + not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as + windowBits < 8). msg is set to null if there is no error message. + inflateInit2 does not perform any decompression: this will be done by + inflate(). +*/ + +extern int EXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary (history buffer) from the given + uncompressed byte sequence. This function must be called immediately after + a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen + by the compressor can be determined from the Adler32 value returned by this + call of inflate. The compressor and decompressor must use exactly the same + dictionary (see deflateSetDictionary). + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +extern int EXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until the special marker (see deflate() + above) can be found, or until all available input is skipped. No output + is provided. + + inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no marker has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +extern int EXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level, window size, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +extern int EXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least 0.1% larger than + sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +extern int EXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ + + +typedef voidp gzFile; + +extern gzFile EXPORT gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9"). gzopen can be used to read a file which is not in gzip format; + in this case gzread will directly read from the file without decompression. + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). +*/ + +extern gzFile EXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +extern int EXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +extern int EXPORT gzwrite OF((gzFile file, const voidp buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +extern int EXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +extern int EXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +extern const char * EXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); + +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +extern uLong EXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running crc with the bytes buf[0..len-1] and return the updated + crc. If buf is NULL, this function returns the required initial value + for the crc. Pre- and post-conditioning (one's complement) is performed + within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +extern int EXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +extern int EXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +extern int EXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, int strategy, + const char *version, int stream_size)); +extern int EXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + +#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */ + +#ifdef __cplusplus +} +#endif + +#endif /* _ZLIB_H */ diff --git a/sys/lib/libz/zutil.h b/sys/lib/libz/zutil.h new file mode 100644 index 00000000000..7e8e1f246bd --- /dev/null +++ b/sys/lib/libz/zutil.h @@ -0,0 +1,203 @@ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-1996 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* $Id: zutil.h,v 1.1 1997/02/06 02:56:56 downsj Exp $ */ + +#ifndef _Z_UTIL_H +#define _Z_UTIL_H + +#include "zlib.h" + +#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS) +# include <stddef.h> +# include <errno.h> +#else + extern int errno; +#endif +#ifdef STDC +# include <string.h> +# include <stdlib.h> +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = (char*)ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + +#ifdef MSDOS +# define OS_CODE 0x00 +# ifdef __TURBOC__ +# include <alloc.h> +# else /* MSC or DJGPP */ +# include <malloc.h> +# endif +#endif + +#ifdef OS2 +# define OS_CODE 0x06 +#endif + +#ifdef WIN32 /* Window 95 & Windows NT */ +# define OS_CODE 0x0b +#endif + +#if defined(VAXC) || defined(VMS) +# define OS_CODE 0x02 +# define FOPEN(name, mode) \ + fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") +#endif + +#ifdef AMIGA +# define OS_CODE 0x01 +#endif + +#if defined(ATARI) || defined(atarist) +# define OS_CODE 0x05 +#endif + +#ifdef MACOS +# define OS_CODE 0x07 +#endif + +#ifdef __50SERIES /* Prime/PRIMOS */ +# define OS_CODE 0x0F +#endif + +#ifdef TOPS20 +# define OS_CODE 0x0a +#endif + +#if defined(_BEOS_) || defined(RISCOS) +# define fdopen(fd,mode) NULL /* No fdopen() */ +#endif + + /* Common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef FOPEN +# define FOPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#ifdef HAVE_STRERROR + extern char *strerror OF((int)); +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + +#if defined(pyr) +# define NO_MEMCPY +#endif +#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER) + /* Use our own functions for small and medium model with MSC <= 5.0. + * You may have to use the same strategy for Borland C (untested). + */ +# define NO_MEMCPY +#endif +#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) +# define HAVE_MEMCPY +#endif +#ifdef HAVE_MEMCPY +# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ +# define zmemcpy _fmemcpy +# define zmemcmp _fmemcmp +# define zmemzero(dest, len) _fmemset(dest, 0, len) +# else +# define zmemcpy memcpy +# define zmemcmp memcmp +# define zmemzero(dest, len) memset(dest, 0, len) +# endif +#else + extern void zmemcpy OF((Bytef* dest, Bytef* source, uInt len)); + extern int zmemcmp OF((Bytef* s1, Bytef* s2, uInt len)); + extern void zmemzero OF((Bytef* dest, uInt len)); +#endif + +/* Diagnostic functions */ +#ifdef DEBUG +# include <stdio.h> +# ifndef verbose +# define verbose 0 +# endif + extern void z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len)); + +voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); +void zcfree OF((voidpf opaque, voidpf ptr)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +#endif /* _Z_UTIL_H */ |