diff options
Diffstat (limited to 'sys')
| -rw-r--r-- | sys/conf/files | 10 | ||||
| -rw-r--r-- | sys/dev/ic/siop.c | 2017 | ||||
| -rw-r--r-- | sys/dev/ic/siop_common.c | 568 | ||||
| -rw-r--r-- | sys/dev/ic/siopreg.h | 377 | ||||
| -rw-r--r-- | sys/dev/ic/siopvar.h | 99 | ||||
| -rw-r--r-- | sys/dev/ic/siopvar_common.h | 200 | ||||
| -rw-r--r-- | sys/dev/microcode/siop/Makefile | 17 | ||||
| -rw-r--r-- | sys/dev/microcode/siop/ncr53cxxx.c | 1395 | ||||
| -rw-r--r-- | sys/dev/microcode/siop/siop.out | 407 | ||||
| -rw-r--r-- | sys/dev/microcode/siop/siop.ss | 409 | ||||
| -rw-r--r-- | sys/dev/pci/files.pci | 11 | ||||
| -rw-r--r-- | sys/dev/pci/siop_pci.c | 84 | ||||
| -rw-r--r-- | sys/dev/pci/siop_pci_common.c | 347 | ||||
| -rw-r--r-- | sys/dev/pci/siop_pci_common.h | 61 |
14 files changed, 6000 insertions, 2 deletions
diff --git a/sys/conf/files b/sys/conf/files index 37e843446cb..51a0deb2e31 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -1,4 +1,4 @@ -# $OpenBSD: files,v 1.187 2001/02/10 10:42:34 niklas Exp $ +# $OpenBSD: files,v 1.188 2001/02/15 04:07:57 krw Exp $ # $NetBSD: files,v 1.87 1996/05/19 17:17:50 jonathan Exp $ # @(#)files.newconf 7.5 (Berkeley) 5/10/93 @@ -122,6 +122,14 @@ define ncr53c9x device esp: scsi, ncr53c9x file dev/ic/ncr53c9x.c ncr53c9x +# common stuff for siop and esiop +define siop_common +file dev/ic/siop_common.c siop_common + +# Symbios/NCR 53c720/53c8xx SCSI controllers +device siop: scsi,siop_common +file dev/ic/siop.c siop + # 3Com Etherlink-III Ethernet controller device ep: ether, ifnet, ifmedia, mii file dev/ic/elink3.c ep diff --git a/sys/dev/ic/siop.c b/sys/dev/ic/siop.c new file mode 100644 index 00000000000..c00398df08d --- /dev/null +++ b/sys/dev/ic/siop.c @@ -0,0 +1,2017 @@ +/* $OpenBSD: siop.c,v 1.1 2001/02/15 04:07:58 krw Exp $ */ +/* $NetBSD: siop.c,v 1.39 2001/02/11 18:04:49 bouyer Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* SYM53c7/8xx PCI-SCSI I/O Processors driver */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/device.h> +#include <sys/malloc.h> +#include <sys/buf.h> +#include <sys/kernel.h> + +#include <machine/endian.h> +#include <machine/bus.h> + +#include <dev/microcode/siop/siop.out> + +#include <scsi/scsi_all.h> +#include <scsi/scsi_message.h> +#include <scsi/scsiconf.h> + +#include <dev/ic/siopreg.h> +#include <dev/ic/siopvar.h> +#include <dev/ic/siopvar_common.h> + +#ifndef DEBUG +#undef DEBUG +#endif +#undef SIOP_DEBUG +#undef SIOP_DEBUG_DR +#undef SIOP_DEBUG_INTR +#undef SIOP_DEBUG_SCHED +#undef DUMP_SCRIPT + +#define SIOP_STATS + +#ifndef SIOP_DEFAULT_TARGET +#define SIOP_DEFAULT_TARGET 7 +#endif + +/* number of cmd descriptors per block */ +#define SIOP_NCMDPB (PAGE_SIZE / sizeof(struct siop_xfer)) + +/* Number of scheduler slot (needs to match script) */ +#define SIOP_NSLOTS 40 + +void siop_reset __P((struct siop_softc *)); +void siop_handle_reset __P((struct siop_softc *)); +int siop_handle_qtag_reject __P((struct siop_cmd *)); +void siop_scsicmd_end __P((struct siop_cmd *)); +void siop_start __P((struct siop_softc *)); +void siop_timeout __P((void *)); +int siop_scsicmd __P((struct scsi_xfer *)); +void siop_dump_script __P((struct siop_softc *)); +int siop_morecbd __P((struct siop_softc *)); +struct siop_lunsw *siop_get_lunsw __P((struct siop_softc *)); +void siop_add_reselsw __P((struct siop_softc *, int)); +void siop_update_scntl3 __P((struct siop_softc *, struct siop_target *)); + +struct cfdriver siop_cd = { + NULL, "siop", DV_DULL +}; + +struct scsi_adapter siop_adapter = { + siop_scsicmd, + siop_minphys, + NULL, + NULL, +}; + +struct scsi_device siop_dev = { + NULL, + NULL, + NULL, + NULL, +}; + +#ifdef SIOP_STATS +static int siop_stat_intr = 0; +static int siop_stat_intr_shortxfer = 0; +static int siop_stat_intr_sdp = 0; +static int siop_stat_intr_done = 0; +static int siop_stat_intr_xferdisc = 0; +static int siop_stat_intr_lunresel = 0; +static int siop_stat_intr_qfull = 0; +void siop_printstats __P((void)); +#define INCSTAT(x) x++ +#else +#define INCSTAT(x) +#endif + +static __inline__ void siop_script_sync __P((struct siop_softc *, int)); +static __inline__ void +siop_script_sync(sc, ops) + struct siop_softc *sc; + int ops; +{ + if ((sc->features & SF_CHIP_RAM) == 0) + bus_dmamap_sync(sc->sc_dmat, sc->sc_scriptdma, ops); +} + +static __inline__ u_int32_t siop_script_read __P((struct siop_softc *, u_int)); +static __inline__ u_int32_t +siop_script_read(sc, offset) + struct siop_softc *sc; + u_int offset; +{ + if (sc->features & SF_CHIP_RAM) { + return bus_space_read_4(sc->sc_ramt, sc->sc_ramh, offset * 4); + } else { + return letoh32(sc->sc_script[offset]); + } +} + +static __inline__ void siop_script_write __P((struct siop_softc *, u_int, + u_int32_t)); +static __inline__ void +siop_script_write(sc, offset, val) + struct siop_softc *sc; + u_int offset; + u_int32_t val; +{ + if (sc->features & SF_CHIP_RAM) { + bus_space_write_4(sc->sc_ramt, sc->sc_ramh, offset * 4, val); + } else { + sc->sc_script[offset] = htole32(val); + } +} + +void +siop_attach(sc) + struct siop_softc *sc; +{ + int error, i; + bus_dma_segment_t seg; + int rseg; + + /* + * Allocate DMA-safe memory for the script and map it. + */ + if ((sc->features & SF_CHIP_RAM) == 0) { + error = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, + PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to allocate script DMA memory, " + "error = %d\n", sc->sc_dev.dv_xname, error); + return; + } + error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, PAGE_SIZE, + (caddr_t *)&sc->sc_script, BUS_DMA_NOWAIT|BUS_DMA_COHERENT); + if (error) { + printf("%s: unable to map script DMA memory, " + "error = %d\n", sc->sc_dev.dv_xname, error); + return; + } + error = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, + PAGE_SIZE, 0, BUS_DMA_NOWAIT, &sc->sc_scriptdma); + if (error) { + printf("%s: unable to create script DMA map, " + "error = %d\n", sc->sc_dev.dv_xname, error); + return; + } + error = bus_dmamap_load(sc->sc_dmat, sc->sc_scriptdma, + sc->sc_script, PAGE_SIZE, NULL, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to load script DMA map, " + "error = %d\n", sc->sc_dev.dv_xname, error); + return; + } + sc->sc_scriptaddr = sc->sc_scriptdma->dm_segs[0].ds_addr; + sc->ram_size = PAGE_SIZE; + } + TAILQ_INIT(&sc->free_list); + TAILQ_INIT(&sc->ready_list); + TAILQ_INIT(&sc->urgent_list); + TAILQ_INIT(&sc->cmds); + TAILQ_INIT(&sc->lunsw_list); + sc->sc_currschedslot = 0; +#ifdef SIOP_DEBUG + printf("%s: script size = %d, PHY addr=0x%x, VIRT=%p\n", + sc->sc_dev.dv_xname, (int)sizeof(siop_script), + (u_int32_t)sc->sc_scriptaddr, sc->sc_script); +#endif + + sc->sc_link.adapter_softc = sc; + sc->sc_link.openings = 2; + sc->sc_link.adapter_buswidth = + (sc->features & SF_BUS_WIDE) ? 16 : 8; + sc->sc_link.adapter_target = bus_space_read_1(sc->sc_rt, + sc->sc_rh, SIOP_SCID); + if (sc->sc_link.adapter_target == 0 || + sc->sc_link.adapter_target >= + sc->sc_link.adapter_buswidth) + sc->sc_link.adapter_target = SIOP_DEFAULT_TARGET; + sc->sc_link.adapter = &siop_adapter; + sc->sc_link.device = &siop_dev; + sc->sc_link.flags = 0; + + for (i = 0; i < 16; i++) + sc->targets[i] = NULL; + + /* find min/max sync period for this chip */ + sc->maxsync = 0; + sc->minsync = 255; + for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]); i++) { + if (sc->clock_period != scf_period[i].clock) + continue; + if (sc->maxsync < scf_period[i].period) + sc->maxsync = scf_period[i].period; + if (sc->minsync > scf_period[i].period) + sc->minsync = scf_period[i].period; + } + if (sc->maxsync == 255 || sc->minsync == 0) + panic("siop: can't find my sync parameters\n"); + /* Do a bus reset, so that devices fall back to narrow/async */ + siop_resetbus(sc); + /* + * siop_reset() will reset the chip, thus clearing pending interrupts + */ + siop_reset(sc); +#ifdef DUMP_SCRIPT + siop_dump_script(sc); +#endif + + config_found((struct device*)sc, &sc->sc_link, scsiprint); +} + +void +siop_reset(sc) + struct siop_softc *sc; +{ + int i, j; + struct siop_lunsw *lunsw; + + siop_common_reset(sc); + + /* copy and patch the script */ + if (sc->features & SF_CHIP_RAM) { + bus_space_write_region_4(sc->sc_ramt, sc->sc_ramh, 0, + siop_script, sizeof(siop_script) / sizeof(siop_script[0])); + for (j = 0; j < + (sizeof(E_abs_msgin_Used) / sizeof(E_abs_msgin_Used[0])); + j++) { + bus_space_write_4(sc->sc_ramt, sc->sc_ramh, + E_abs_msgin_Used[j] * 4, + sc->sc_scriptaddr + Ent_msgin_space); + } + } else { + for (j = 0; + j < (sizeof(siop_script) / sizeof(siop_script[0])); j++) { + sc->sc_script[j] = htole32(siop_script[j]); + } + for (j = 0; j < + (sizeof(E_abs_msgin_Used) / sizeof(E_abs_msgin_Used[0])); + j++) { + sc->sc_script[E_abs_msgin_Used[j]] = + htole32(sc->sc_scriptaddr + Ent_msgin_space); + } + } + sc->script_free_lo = sizeof(siop_script) / sizeof(siop_script[0]); + sc->script_free_hi = sc->ram_size / 4; + + /* free used and unused lun switches */ + while((lunsw = TAILQ_FIRST(&sc->lunsw_list)) != NULL) { +#ifdef SIOP_DEBUG + printf("%s: free lunsw at offset %d\n", + sc->sc_dev.dv_xname, lunsw->lunsw_off); +#endif + TAILQ_REMOVE(&sc->lunsw_list, lunsw, next); + free(lunsw, M_DEVBUF); + } + TAILQ_INIT(&sc->lunsw_list); + /* restore reselect switch */ + for (i = 0; i < sc->sc_link.adapter_buswidth; i++) { + if (sc->targets[i] == NULL) + continue; +#ifdef SIOP_DEBUG + printf("%s: restore sw for target %d\n", + sc->sc_dev.dv_xname, i); +#endif + free(sc->targets[i]->lunsw, M_DEVBUF); + sc->targets[i]->lunsw = siop_get_lunsw(sc); + if (sc->targets[i]->lunsw == NULL) { + printf("%s: can't alloc lunsw for target %d\n", + sc->sc_dev.dv_xname, i); + break; + } + siop_add_reselsw(sc, i); + } + + /* start script */ + if ((sc->features & SF_CHIP_RAM) == 0) { + bus_dmamap_sync(sc->sc_dmat, sc->sc_scriptdma, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + } + bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP, + sc->sc_scriptaddr + Ent_reselect); +} + +#if 0 +#define CALL_SCRIPT(ent) do {\ + printf ("start script DSA 0x%lx DSP 0x%lx\n", \ + siop_cmd->dsa, \ + sc->sc_scriptaddr + ent); \ +bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP, sc->sc_scriptaddr + ent); \ +} while (0) +#else +#define CALL_SCRIPT(ent) do {\ +bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP, sc->sc_scriptaddr + ent); \ +} while (0) +#endif + +int +siop_intr(v) + void *v; +{ + struct siop_softc *sc = v; + struct siop_target *siop_target; + struct siop_cmd *siop_cmd; + struct siop_lun *siop_lun; + struct scsi_xfer *xs; + int istat, sist, sstat1, dstat; + u_int32_t irqcode; + int need_reset = 0; + int offset, target, lun, tag; + bus_addr_t dsa; + struct siop_cbd *cbdp; + int freetarget = 0; + int restart = 0; + + istat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT); + if ((istat & (ISTAT_INTF | ISTAT_DIP | ISTAT_SIP)) == 0) + return 0; + INCSTAT(siop_stat_intr); + if (istat & ISTAT_INTF) { + printf("INTRF\n"); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_INTF); + } + /* use DSA to find the current siop_cmd */ + dsa = bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA); + for (cbdp = TAILQ_FIRST(&sc->cmds); cbdp != NULL; + cbdp = TAILQ_NEXT(cbdp, next)) { + if (dsa >= cbdp->xferdma->dm_segs[0].ds_addr && + dsa < cbdp->xferdma->dm_segs[0].ds_addr + PAGE_SIZE) { + dsa -= cbdp->xferdma->dm_segs[0].ds_addr; + siop_cmd = &cbdp->cmds[dsa / sizeof(struct siop_xfer)]; + siop_table_sync(siop_cmd, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + break; + } + } + if (cbdp == NULL) { + siop_cmd = NULL; + } + if (siop_cmd) { + xs = siop_cmd->xs; + siop_target = siop_cmd->siop_target; + target = siop_cmd->xs->sc_link->target; + lun = siop_cmd->xs->sc_link->lun; + tag = siop_cmd->tag; + siop_lun = siop_target->siop_lun[lun]; +#ifdef DIAGNOSTIC + if (siop_cmd->status != CMDST_ACTIVE && + siop_cmd->status != CMDST_SENSE_ACTIVE) { + printf("siop_cmd (lun %d) not active (%d)\n", + lun, siop_cmd->status); + xs = NULL; + siop_target = NULL; + target = -1; + lun = -1; + tag = -1; + siop_lun = NULL; + siop_cmd = NULL; + } else if (siop_lun->siop_tag[tag].active != siop_cmd) { + printf("siop_cmd (lun %d tag %d) not in siop_lun " + "active (%p != %p)\n", lun, tag, siop_cmd, + siop_lun->siop_tag[tag].active); + } +#endif + } else { + xs = NULL; + siop_target = NULL; + target = -1; + lun = -1; + tag = -1; + siop_lun = NULL; + } + if (istat & ISTAT_DIP) { + dstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DSTAT); + if (dstat & DSTAT_SSI) { + printf("single step dsp 0x%08x dsa 0x08%x\n", + (int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) - + sc->sc_scriptaddr), + bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA)); + if ((dstat & ~(DSTAT_DFE | DSTAT_SSI)) == 0 && + (istat & ISTAT_SIP) == 0) { + bus_space_write_1(sc->sc_rt, sc->sc_rh, + SIOP_DCNTL, bus_space_read_1(sc->sc_rt, + sc->sc_rh, SIOP_DCNTL) | DCNTL_STD); + } + return 1; + } + if (dstat & ~(DSTAT_SIR | DSTAT_DFE | DSTAT_SSI)) { + printf("DMA IRQ:"); + if (dstat & DSTAT_IID) + printf(" Illegal instruction"); + if (dstat & DSTAT_ABRT) + printf(" abort"); + if (dstat & DSTAT_BF) + printf(" bus fault"); + if (dstat & DSTAT_MDPE) + printf(" parity"); + if (dstat & DSTAT_DFE) + printf(" dma fifo empty"); + printf(", DSP=0x%x DSA=0x%x: ", + (int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) - + sc->sc_scriptaddr), + bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA)); + if (siop_cmd) + printf("last msg_in=0x%x status=0x%x\n", + siop_cmd->siop_tables.msg_in[0], + letoh32(siop_cmd->siop_tables.status)); + else + printf("%s: current DSA invalid\n", + sc->sc_dev.dv_xname); + need_reset = 1; + } + } + if (istat & ISTAT_SIP) { + if (istat & ISTAT_DIP) + delay(10); + /* + * Can't read sist0 & sist1 independantly, or we have to + * insert delay + */ + sist = bus_space_read_2(sc->sc_rt, sc->sc_rh, SIOP_SIST0); + sstat1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT1); +#ifdef SIOP_DEBUG_INTR + printf("scsi interrupt, sist=0x%x sstat1=0x%x " + "DSA=0x%x DSP=0x%lx\n", sist, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT1), + bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA), + (u_long)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) - + sc->sc_scriptaddr)); +#endif + if (sist & SIST0_RST) { + siop_handle_reset(sc); + siop_start(sc); + /* no table to flush here */ + return 1; + } + if (sist & SIST0_SGE) { + if (siop_cmd) + sc_print_addr(xs->sc_link); + else + printf("%s:", sc->sc_dev.dv_xname); + printf("scsi gross error\n"); + goto reset; + } + if ((sist & SIST0_MA) && need_reset == 0) { + if (siop_cmd) { + int scratcha0; + dstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_DSTAT); + /* + * first restore DSA, in case we were in a S/G + * operation. + */ + bus_space_write_4(sc->sc_rt, sc->sc_rh, + SIOP_DSA, siop_cmd->dsa); + scratcha0 = bus_space_read_1(sc->sc_rt, + sc->sc_rh, SIOP_SCRATCHA); + switch (sstat1 & SSTAT1_PHASE_MASK) { + case SSTAT1_PHASE_STATUS: + /* + * previous phase may be aborted for any reason + * ( for example, the target has less data to + * transfer than requested). Just go to status + * and the command should terminate. + */ + INCSTAT(siop_stat_intr_shortxfer); + if ((dstat & DSTAT_DFE) == 0) + siop_clearfifo(sc); + /* no table to flush here */ + CALL_SCRIPT(Ent_status); + return 1; + case SSTAT1_PHASE_MSGIN: + /* + * target may be ready to disconnect + * Save data pointers just in case. + */ + INCSTAT(siop_stat_intr_xferdisc); + if (scratcha0 & A_flag_data) + siop_sdp(siop_cmd); + else if ((dstat & DSTAT_DFE) == 0) + siop_clearfifo(sc); + bus_space_write_1(sc->sc_rt, sc->sc_rh, + SIOP_SCRATCHA, + scratcha0 & ~A_flag_data); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | + BUS_DMASYNC_PREWRITE); + CALL_SCRIPT(Ent_msgin); + return 1; + } + printf("%s: unexpected phase mismatch %d\n", + sc->sc_dev.dv_xname, + sstat1 & SSTAT1_PHASE_MASK); + } else { + printf("%s: phase mismatch without command\n", + sc->sc_dev.dv_xname); + } + need_reset = 1; + } + if (sist & SIST0_PAR) { + /* parity error, reset */ + if (siop_cmd) + sc_print_addr(xs->sc_link); + else + printf("%s:", sc->sc_dev.dv_xname); + printf("parity error\n"); + goto reset; + } + if ((sist & (SIST1_STO << 8)) && need_reset == 0) { + /* selection time out, assume there's no device here */ + if (siop_cmd) { + siop_cmd->status = CMDST_DONE; + xs->error = XS_SELTIMEOUT; + freetarget = 1; + goto end; + } else { + printf("%s: selection timeout without " + "command\n", sc->sc_dev.dv_xname); + need_reset = 1; + } + } + if (sist & SIST0_UDC) { + /* + * unexpected disconnect. Usually the target signals + * a fatal condition this way. Attempt to get sense. + */ + if (siop_cmd) { + siop_cmd->siop_tables.status = + htole32(SCSI_CHECK); + goto end; + } + printf("%s: unexpected disconnect without " + "command\n", sc->sc_dev.dv_xname); + goto reset; + } + if (sist & (SIST1_SBMC << 8)) { + /* SCSI bus mode change */ + if (siop_modechange(sc) == 0 || need_reset == 1) + goto reset; + if ((istat & ISTAT_DIP) && (dstat & DSTAT_SIR)) { + /* + * we have a script interrupt, it will + * restart the script. + */ + goto scintr; + } + /* + * else we have to restart it ourselve, at the + * interrupted instruction. + */ + bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP, + bus_space_read_4(sc->sc_rt, sc->sc_rh, + SIOP_DSP) - 8); + return 1; + } + /* Else it's an unhandled exeption (for now). */ + printf("%s: unhandled scsi interrupt, sist=0x%x sstat1=0x%x " + "DSA=0x%x DSP=0x%x\n", sc->sc_dev.dv_xname, sist, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT1), + bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA), + (int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) - + sc->sc_scriptaddr)); + if (siop_cmd) { + siop_cmd->status = CMDST_DONE; + xs->error = XS_SELTIMEOUT; + goto end; + } + need_reset = 1; + } + if (need_reset) { +reset: + /* fatal error, reset the bus */ + siop_resetbus(sc); + /* no table to flush here */ + return 1; + } + +scintr: + if ((istat & ISTAT_DIP) && (dstat & DSTAT_SIR)) { /* script interrupt */ + irqcode = bus_space_read_4(sc->sc_rt, sc->sc_rh, + SIOP_DSPS); +#ifdef SIOP_DEBUG_INTR + printf("script interrupt 0x%x\n", irqcode); +#endif + /* + * no command, or an inactive command is only valid for a + * reselect interrupt + */ + if ((irqcode & 0x80) == 0) { + if (siop_cmd == NULL) { + printf("%s: script interrupt (0x%x) with + invalid DSA !!!\n", sc->sc_dev.dv_xname, + irqcode); + goto reset; + } + if (siop_cmd->status != CMDST_ACTIVE && + siop_cmd->status != CMDST_SENSE_ACTIVE) { + printf("%s: command with invalid status " + "(IRQ code 0x%x current status %d) !\n", + sc->sc_dev.dv_xname, + irqcode, siop_cmd->status); + xs = NULL; + } + } + switch(irqcode) { + case A_int_err: + printf("error, DSP=0x%x\n", + (int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, + SIOP_DSP) - sc->sc_scriptaddr)); + if (xs) { + xs->error = XS_SELTIMEOUT; + goto end; + } else { + goto reset; + } + case A_int_reseltarg: + printf("%s: reselect with invalid target\n", + sc->sc_dev.dv_xname); + goto reset; + case A_int_resellun: + INCSTAT(siop_stat_intr_lunresel); + target = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_SCRATCHA) & 0xf; + lun = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_SCRATCHA + 1); + tag = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_SCRATCHA + 2); + siop_target = sc->targets[target]; + if (siop_target == NULL) { + printf("%s: reselect with invalid " + "target %d\n", sc->sc_dev.dv_xname, target); + goto reset; + } + siop_lun = siop_target->siop_lun[lun]; + if (siop_lun == NULL) { + printf("%s: target %d reselect with invalid " + "lun %d\n", sc->sc_dev.dv_xname, + target, lun); + goto reset; + } + if (siop_lun->siop_tag[tag].active == NULL) { + printf("%s: target %d lun %d tag %d reselect " + "without command\n", sc->sc_dev.dv_xname, + target, lun, tag); + goto reset; + } + siop_cmd = siop_lun->siop_tag[tag].active; + bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP, + siop_cmd->dsa + sizeof(struct siop_xfer_common) + + Ent_ldsa_reload_dsa); + siop_table_sync(siop_cmd, BUS_DMASYNC_PREWRITE); + return 1; + case A_int_reseltag: + printf("%s: reselect with invalid tag\n", + sc->sc_dev.dv_xname); + goto reset; + case A_int_msgin: + { + int msgin = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_SFBR); + if (msgin == MSG_MESSAGE_REJECT) { + int msg, extmsg; + if (siop_cmd->siop_tables.msg_out[0] & 0x80) { + /* + * message was part of a identify + + * something else. Identify shoudl't + * have been rejected. + */ + msg = siop_cmd->siop_tables.msg_out[1]; + extmsg = + siop_cmd->siop_tables.msg_out[3]; + } else { + msg = siop_cmd->siop_tables.msg_out[0]; + extmsg = + siop_cmd->siop_tables.msg_out[2]; + } + if (msg == MSG_MESSAGE_REJECT) { + /* MSG_REJECT for a MSG_REJECT !*/ + if (xs) + sc_print_addr(xs->sc_link); + else + printf("%s: ", + sc->sc_dev.dv_xname); + printf("our reject message was " + "rejected\n"); + goto reset; + } + if (msg == MSG_EXTENDED && + extmsg == MSG_EXT_WDTR) { + /* WDTR rejected, initiate sync */ + printf("%s: target %d using 8bit " + "transfers\n", sc->sc_dev.dv_xname, + target); + if ((siop_target->flags & TARF_SYNC) + == 0) { + siop_target->status = TARST_OK; + /* no table to flush here */ + CALL_SCRIPT(Ent_msgin_ack); + return 1; + } + siop_target->status = TARST_SYNC_NEG; + siop_sdtr_msg(siop_cmd, 0, + sc->minsync, sc->maxoff); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | + BUS_DMASYNC_PREWRITE); + CALL_SCRIPT(Ent_send_msgout); + return 1; + } else if (msg == MSG_EXTENDED && + extmsg == MSG_EXT_SDTR) { + /* sync rejected */ + printf("%s: target %d asynchronous\n", + sc->sc_dev.dv_xname, + target); + siop_target->status = TARST_OK; + /* no table to flush here */ + CALL_SCRIPT(Ent_msgin_ack); + return 1; + } else if (msg == MSG_SIMPLE_Q_TAG || + msg == MSG_HEAD_OF_Q_TAG || + msg == MSG_ORDERED_Q_TAG) { + if (siop_handle_qtag_reject( + siop_cmd) == -1) + goto reset; + CALL_SCRIPT(Ent_msgin_ack); + return 1; + } + if (xs) + sc_print_addr(xs->sc_link); + else + printf("%s: ", sc->sc_dev.dv_xname); + if (msg == MSG_EXTENDED) { + printf("scsi message reject, extended " + "message sent was 0x%x\n", extmsg); + } else { + printf("scsi message reject, message " + "sent was 0x%x\n", msg); + } + /* no table to flush here */ + CALL_SCRIPT(Ent_msgin_ack); + return 1; + } + if (xs) + sc_print_addr(xs->sc_link); + else + printf("%s: ", sc->sc_dev.dv_xname); + printf("unhandled message 0x%x\n", + siop_cmd->siop_tables.msg_in[0]); + siop_cmd->siop_tables.msg_out[0] = MSG_MESSAGE_REJECT; + siop_cmd->siop_tables.t_msgout.count= htole32(1); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + CALL_SCRIPT(Ent_send_msgout); + return 1; + } + case A_int_extmsgin: +#ifdef SIOP_DEBUG_INTR + printf("extended message: msg 0x%x len %d\n", + siop_cmd->siop_tables.msg_in[2], + siop_cmd->siop_tables.msg_in[1]); +#endif + if (siop_cmd->siop_tables.msg_in[1] > 6) + printf("%s: extended message too big (%d)\n", + sc->sc_dev.dv_xname, + siop_cmd->siop_tables.msg_in[1]); + siop_cmd->siop_tables.t_extmsgdata.count = + htole32(siop_cmd->siop_tables.msg_in[1] - 1); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + CALL_SCRIPT(Ent_get_extmsgdata); + return 1; + case A_int_extmsgdata: +#ifdef SIOP_DEBUG_INTR + { + int i; + printf("extended message: 0x%x, data:", + siop_cmd->siop_tables.msg_in[2]); + for (i = 3; i < 2 + siop_cmd->siop_tables.msg_in[1]; + i++) + printf(" 0x%x", + siop_cmd->siop_tables.msg_in[i]); + printf("\n"); + } +#endif + if (siop_cmd->siop_tables.msg_in[2] == MSG_EXT_WDTR) { + switch (siop_wdtr_neg(siop_cmd)) { + case SIOP_NEG_MSGOUT: + siop_update_scntl3(sc, + siop_cmd->siop_target); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | + BUS_DMASYNC_PREWRITE); + CALL_SCRIPT(Ent_send_msgout); + return(1); + case SIOP_NEG_ACK: + siop_update_scntl3(sc, + siop_cmd->siop_target); + CALL_SCRIPT(Ent_msgin_ack); + return(1); + default: + panic("invalid retval from " + "siop_wdtr_neg()"); + } + return(1); + } + if (siop_cmd->siop_tables.msg_in[2] == MSG_EXT_SDTR) { + switch (siop_sdtr_neg(siop_cmd)) { + case SIOP_NEG_MSGOUT: + siop_update_scntl3(sc, + siop_cmd->siop_target); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | + BUS_DMASYNC_PREWRITE); + CALL_SCRIPT(Ent_send_msgout); + return(1); + case SIOP_NEG_ACK: + siop_update_scntl3(sc, + siop_cmd->siop_target); + CALL_SCRIPT(Ent_msgin_ack); + return(1); + default: + panic("invalid retval from " + "siop_wdtr_neg()"); + } + return(1); + } + /* send a message reject */ + siop_cmd->siop_tables.msg_out[0] = MSG_MESSAGE_REJECT; + siop_cmd->siop_tables.t_msgout.count = htole32(1); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + CALL_SCRIPT(Ent_send_msgout); + return 1; + case A_int_disc: + INCSTAT(siop_stat_intr_sdp); + offset = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_SCRATCHA + 1); +#ifdef SIOP_DEBUG_DR + printf("disconnect offset %d\n", offset); +#endif + if (offset > SIOP_NSG) { + printf("%s: bad offset for disconnect (%d)\n", + sc->sc_dev.dv_xname, offset); + goto reset; + } + /* + * offset == SIOP_NSG may be a valid condition if + * we get a sdp when the xfer is done. + * Don't call memmove in this case. + */ + if (offset < SIOP_NSG) { + bcopy(&siop_cmd->siop_tables.data[offset], + &siop_cmd->siop_tables.data[0], + (SIOP_NSG - offset) * sizeof(scr_table_t)); + siop_table_sync(siop_cmd, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + } + CALL_SCRIPT(Ent_script_sched); + /* check if we can put some command in scheduler */ + siop_start(sc); + return 1; + case A_int_resfail: + printf("reselect failed\n"); + CALL_SCRIPT(Ent_script_sched); + return 1; + case A_int_done: + if (xs == NULL) { + printf("%s: done without command, DSA=0x%lx\n", + sc->sc_dev.dv_xname, (u_long)siop_cmd->dsa); + siop_cmd->status = CMDST_FREE; + siop_start(sc); + CALL_SCRIPT(Ent_script_sched); + return 1; + } +#ifdef SIOP_DEBUG_INTR + printf("done, DSA=0x%lx target id 0x%x last msg " + "in=0x%x status=0x%x\n", (u_long)siop_cmd->dsa, + letoh32(siop_cmd->siop_tables.id), + siop_cmd->siop_tables.msg_in[0], + letoh32(siop_cmd->siop_tables.status)); +#endif + INCSTAT(siop_stat_intr_done); + if (siop_cmd->status == CMDST_SENSE_ACTIVE) + siop_cmd->status = CMDST_SENSE_DONE; + else + siop_cmd->status = CMDST_DONE; + goto end; + default: + printf("unknown irqcode %x\n", irqcode); + if (xs) { + xs->error = XS_SELTIMEOUT; + goto end; + } + goto reset; + } + return 1; + } + /* We just should't get there */ + panic("siop_intr: I shouldn't be there !"); + return 1; +end: + /* + * restart the script now if command completed properly + * Otherwise wait for siop_scsicmd_end(), it may need to put + * a cmd in front of the queue + */ + if (letoh32(siop_cmd->siop_tables.status) == SCSI_OK && + TAILQ_FIRST(&sc->urgent_list) != NULL) + CALL_SCRIPT(Ent_script_sched); + else + restart = 1; + siop_scsicmd_end(siop_cmd); + siop_lun->siop_tag[tag].active = NULL; + if (siop_cmd->status == CMDST_FREE) { + TAILQ_INSERT_TAIL(&sc->free_list, siop_cmd, next); + siop_lun->lun_flags &= ~SIOP_LUNF_FULL; + if (freetarget && siop_target->status == TARST_PROBING) + siop_del_dev(sc, target, lun); + } + siop_start(sc); + if (restart) + CALL_SCRIPT(Ent_script_sched); + return 1; +} + +void +siop_scsicmd_end(siop_cmd) + struct siop_cmd *siop_cmd; +{ + struct scsi_xfer *xs = siop_cmd->xs; + struct siop_softc *sc = siop_cmd->siop_sc; + + switch(letoh32(siop_cmd->siop_tables.status)) { + case SCSI_OK: + xs->error = (siop_cmd->status == CMDST_DONE) ? + XS_NOERROR : XS_SENSE; + break; + case SCSI_BUSY: + xs->error = XS_BUSY; + break; + case SCSI_CHECK: + if (siop_cmd->status == CMDST_SENSE_DONE) { + /* request sense on a request sense ? */ + printf("request sense failed\n"); + xs->error = XS_DRIVER_STUFFUP; + } else { + siop_cmd->status = CMDST_SENSE; + } + break; + case SCSI_QUEUE_FULL: + { + struct siop_lun *siop_lun = siop_cmd->siop_target->siop_lun[ + xs->sc_link->lun]; + /* + * device didn't queue the command. We have to + * retry it. + * We insert it in the urgent list, hoping to preserve order. + * But unfortunably, commands already in the scheduler may + * be accepted before this one. + * Also remember the condition, to avoid starting new commands + * for this device before one is done. + */ + INCSTAT(siop_stat_intr_qfull); +#ifdef SIOP_DEBUG + printf("%s:%d:%d: queue full (tag %d)\n", sc->sc_dev.dv_xname, + xs->sc_link->target, + xs->sc_link->lun, siop_cmd->tag); +#endif + timeout_del(&xs->stimeout); + siop_lun->lun_flags |= SIOP_LUNF_FULL; + siop_cmd->status = CMDST_READY; + siop_setuptables(siop_cmd); + TAILQ_INSERT_TAIL(&sc->urgent_list, siop_cmd, next); + return; + } + case SCSI_SIOP_NOCHECK: + /* + * don't check status, xs->error is already valid + */ + break; + case SCSI_SIOP_NOSTATUS: + /* + * the status byte was not updated, cmd was + * aborted + */ + xs->error = XS_SELTIMEOUT; + break; + default: + xs->error = XS_DRIVER_STUFFUP; + } + if (siop_cmd->status != CMDST_SENSE_DONE && + xs->flags & (SCSI_DATA_IN | SCSI_DATA_OUT)) { + bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, + (xs->flags & SCSI_DATA_IN) ? + BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_data); + } + bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_cmd); + if (siop_cmd->status == CMDST_SENSE) { + /* issue a request sense for this target */ + int error; + siop_cmd->rs_cmd.opcode = REQUEST_SENSE; + siop_cmd->rs_cmd.byte2 = xs->sc_link->lun << 5; + siop_cmd->rs_cmd.unused[0] = siop_cmd->rs_cmd.unused[1] = 0; + siop_cmd->rs_cmd.length = sizeof(struct scsi_sense_data); + siop_cmd->rs_cmd.control = 0; + siop_cmd->flags &= ~CMDFL_TAG; + error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_cmd, + &siop_cmd->rs_cmd, sizeof(struct scsi_sense), + NULL, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to load cmd DMA map: %d", + sc->sc_dev.dv_xname, error); + xs->error = XS_DRIVER_STUFFUP; + goto out; + } + error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_data, + &xs->sense, sizeof(struct scsi_sense_data), + NULL, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to load sense DMA map: %d", + sc->sc_dev.dv_xname, error); + xs->error = XS_DRIVER_STUFFUP; + bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_cmd); + goto out; + } + bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, + BUS_DMASYNC_PREREAD); + bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_cmd, + BUS_DMASYNC_PREWRITE); + + siop_setuptables(siop_cmd); + /* arrange for the cmd to be handled now */ + TAILQ_INSERT_HEAD(&sc->urgent_list, siop_cmd, next); + return; + } else if (siop_cmd->status == CMDST_SENSE_DONE) { + bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, + BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_data); + } +out: + timeout_del(&siop_cmd->xs->stimeout); + siop_cmd->status = CMDST_FREE; + xs->flags |= ITSDONE; + xs->resid = 0; + if ((xs->flags & SCSI_POLL) == 0) + scsi_done (xs); +} + +/* + * handle a rejected queue tag message: the command will run untagged, + * has to adjust the reselect script. + */ +int +siop_handle_qtag_reject(siop_cmd) + struct siop_cmd *siop_cmd; +{ + struct siop_softc *sc = siop_cmd->siop_sc; + int target = siop_cmd->xs->sc_link->target; + int lun = siop_cmd->xs->sc_link->lun; + int tag = siop_cmd->siop_tables.msg_out[2]; + struct siop_lun *siop_lun = sc->targets[target]->siop_lun[lun]; + +#ifdef SIOP_DEBUG + printf("%s:%d:%d: tag message %d (%d) rejected (status %d)\n", + sc->sc_dev.dv_xname, target, lun, tag, siop_cmd->tag, + siop_cmd->status); +#endif + + if (siop_lun->siop_tag[0].active != NULL) { + printf("%s: untagged command already running for target %d " + "lun %d (status %d)\n", sc->sc_dev.dv_xname, target, lun, + siop_lun->siop_tag[0].active->status); + return -1; + } + /* clear tag slot */ + siop_lun->siop_tag[tag].active = NULL; + /* add command to non-tagged slot */ + siop_lun->siop_tag[0].active = siop_cmd; + siop_cmd->tag = 0; + /* adjust reselect script if there is one */ + if (siop_lun->siop_tag[0].reseloff > 0) { + siop_script_write(sc, + siop_lun->siop_tag[0].reseloff + 1, + siop_cmd->dsa + sizeof(struct siop_xfer_common) + + Ent_ldsa_reload_dsa); + siop_table_sync(siop_cmd, BUS_DMASYNC_PREWRITE); + } + return 0; +} + +/* + * handle a bus reset: reset chip, unqueue all active commands, free all + * target struct and report loosage to upper layer. + * As the upper layer may requeue immediatly we have to first store + * all active commands in a temporary queue. + */ +void +siop_handle_reset(sc) + struct siop_softc *sc; +{ + struct cmd_list reset_list; + struct siop_cmd *siop_cmd, *next_siop_cmd; + struct siop_lun *siop_lun; + int target, lun, tag; + /* + * scsi bus reset. reset the chip and restart + * the queue. Need to clean up all active commands + */ + printf("%s: scsi bus reset\n", sc->sc_dev.dv_xname); + /* stop, reset and restart the chip */ + siop_reset(sc); + TAILQ_INIT(&reset_list); + /* + * Process all commands: first commmands being executed + */ + for (target = 0; target < sc->sc_link.adapter_buswidth; + target++) { + if (sc->targets[target] == NULL) + continue; + for (lun = 0; lun < 8; lun++) { + siop_lun = sc->targets[target]->siop_lun[lun]; + if (siop_lun == NULL) + continue; + siop_lun->lun_flags &= ~SIOP_LUNF_FULL; + for (tag = 0; tag < + ((sc->targets[target]->flags & TARF_TAG) ? + SIOP_NTAG : 1); + tag++) { + siop_cmd = siop_lun->siop_tag[tag].active; + if (siop_cmd == NULL) + continue; + printf("cmd %p (target %d:%d) in reset list\n", + siop_cmd, target, lun); + TAILQ_INSERT_TAIL(&reset_list, siop_cmd, next); + siop_lun->siop_tag[tag].active = NULL; + } + } + sc->targets[target]->status = TARST_ASYNC; + sc->targets[target]->flags &= ~TARF_ISWIDE; + } + /* Next commands from the urgent list */ + for (siop_cmd = TAILQ_FIRST(&sc->urgent_list); siop_cmd != NULL; + siop_cmd = next_siop_cmd) { + next_siop_cmd = TAILQ_NEXT(siop_cmd, next); + siop_cmd->flags &= ~CMDFL_TAG; + printf("cmd %p (target %d:%d) in reset list (wait)\n", + siop_cmd, siop_cmd->xs->sc_link->target, + siop_cmd->xs->sc_link->lun); + TAILQ_REMOVE(&sc->urgent_list, siop_cmd, next); + TAILQ_INSERT_TAIL(&reset_list, siop_cmd, next); + } + /* Then command waiting in the input list */ + for (siop_cmd = TAILQ_FIRST(&sc->ready_list); siop_cmd != NULL; + siop_cmd = next_siop_cmd) { + next_siop_cmd = TAILQ_NEXT(siop_cmd, next); + siop_cmd->flags &= ~CMDFL_TAG; + printf("cmd %p (target %d:%d) in reset list (wait)\n", + siop_cmd, siop_cmd->xs->sc_link->target, + siop_cmd->xs->sc_link->lun); + TAILQ_REMOVE(&sc->ready_list, siop_cmd, next); + TAILQ_INSERT_TAIL(&reset_list, siop_cmd, next); + } + + for (siop_cmd = TAILQ_FIRST(&reset_list); siop_cmd != NULL; + siop_cmd = next_siop_cmd) { + next_siop_cmd = TAILQ_NEXT(siop_cmd, next); + siop_cmd->xs->error = (siop_cmd->flags & CMDFL_TIMEOUT) ? + XS_TIMEOUT : XS_RESET; + siop_cmd->siop_tables.status = htole32(SCSI_SIOP_NOCHECK); + printf("cmd %p (status %d) about to be processed\n", siop_cmd, + siop_cmd->status); + if (siop_cmd->status == CMDST_SENSE || + siop_cmd->status == CMDST_SENSE_ACTIVE) + siop_cmd->status = CMDST_SENSE_DONE; + else + siop_cmd->status = CMDST_DONE; + TAILQ_REMOVE(&reset_list, siop_cmd, next); + siop_scsicmd_end(siop_cmd); + TAILQ_INSERT_TAIL(&sc->free_list, siop_cmd, next); + } +} + +int +siop_scsicmd(xs) + struct scsi_xfer *xs; +{ + struct siop_softc *sc = (struct siop_softc *)xs->sc_link->adapter_softc; + struct siop_cmd *siop_cmd; + int s, error, i; + const int target = xs->sc_link->target; + const int lun = xs->sc_link->lun; + + s = splbio(); +#ifdef SIOP_DEBUG_SCHED + printf("starting cmd for %d:%d\n", target, lun); +#endif + siop_cmd = TAILQ_FIRST(&sc->free_list); + if (siop_cmd) { + TAILQ_REMOVE(&sc->free_list, siop_cmd, next); + } else { + if (siop_morecbd(sc) == 0) { + siop_cmd = TAILQ_FIRST(&sc->free_list); +#ifdef DIAGNOSTIC + if (siop_cmd == NULL) + panic("siop_morecbd succeed and does nothing"); +#endif + TAILQ_REMOVE(&sc->free_list, siop_cmd, next); + } + } + if (siop_cmd == NULL) { + xs->error = XS_DRIVER_STUFFUP; + splx(s); + return(TRY_AGAIN_LATER); + } + + /* Always reset xs->stimeout, lest we timeout_del() with trash */ + timeout_set(&xs->stimeout, siop_timeout, siop_cmd); + +#ifdef DIAGNOSTIC + if (siop_cmd->status != CMDST_FREE) + panic("siop_scsicmd: new cmd not free"); +#endif + if (sc->targets[target] == NULL) { +#ifdef SIOP_DEBUG + printf("%s: alloc siop_target for target %d\n", + sc->sc_dev.dv_xname, target); +#endif + sc->targets[target] = + malloc(sizeof(struct siop_target), M_DEVBUF, M_NOWAIT); + if (sc->targets[target] == NULL) { + printf("%s: can't malloc memory for target %d\n", + sc->sc_dev.dv_xname, target); + xs->error = XS_DRIVER_STUFFUP; + splx(s); + return(TRY_AGAIN_LATER); + } + sc->targets[target]->status = TARST_PROBING; + sc->targets[target]->flags = 0; + sc->targets[target]->id = sc->clock_div << 24; /* scntl3 */ + sc->targets[target]->id |= target << 16; /* id */ + /* sc->targets[target]->id |= 0x0 << 8; scxfer is 0 */ + + /* get a lun switch script */ + sc->targets[target]->lunsw = siop_get_lunsw(sc); + if (sc->targets[target]->lunsw == NULL) { + printf("%s: can't alloc lunsw for target %d\n", + sc->sc_dev.dv_xname, target); + xs->error = XS_DRIVER_STUFFUP; + splx(s); + return(TRY_AGAIN_LATER); + } + for (i=0; i < 8; i++) + sc->targets[target]->siop_lun[i] = NULL; + siop_add_reselsw(sc, target); + } + if (sc->targets[target]->siop_lun[lun] == NULL) { + sc->targets[target]->siop_lun[lun] = + malloc(sizeof(struct siop_lun), M_DEVBUF, M_NOWAIT); + if (sc->targets[target]->siop_lun[lun] == NULL) { + printf("%s: can't alloc siop_lun for target %d " + "lun %d\n", sc->sc_dev.dv_xname, target, lun); + xs->error = XS_DRIVER_STUFFUP; + splx(s); + return(TRY_AGAIN_LATER); + } + memset(sc->targets[target]->siop_lun[lun], 0, + sizeof(struct siop_lun)); + } + siop_cmd->siop_target = sc->targets[target]; + siop_cmd->xs = xs; + siop_cmd->flags = 0; + siop_cmd->status = CMDST_READY; + + /* load the DMA maps */ + error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_cmd, + xs->cmd, xs->cmdlen, NULL, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to load cmd DMA map: %d", + sc->sc_dev.dv_xname, error); + xs->error = XS_DRIVER_STUFFUP; + splx(s); + return(TRY_AGAIN_LATER); + } + if (xs->flags & (SCSI_DATA_IN | SCSI_DATA_OUT)) { + error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_data, + xs->data, xs->datalen, NULL, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to load cmd DMA map: %d", + sc->sc_dev.dv_xname, error); + xs->error = XS_DRIVER_STUFFUP; + bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_cmd); + splx(s); + return(TRY_AGAIN_LATER); + } + bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, + (xs->flags & SCSI_DATA_IN) ? + BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); + } + bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_cmd, + BUS_DMASYNC_PREWRITE); + + siop_setuptables(siop_cmd); + + TAILQ_INSERT_TAIL(&sc->ready_list, siop_cmd, next); + + siop_start(sc); + if (xs->flags & SCSI_POLL) { + /* poll for command completion */ + while ((xs->flags & ITSDONE) == 0) { + delay(1000); + siop_intr(sc); + } + splx(s); + return (COMPLETE); + } + splx(s); + return (SUCCESSFULLY_QUEUED); +} + +void +siop_start(sc) + struct siop_softc *sc; +{ + struct siop_cmd *siop_cmd, *next_siop_cmd; + struct siop_lun *siop_lun; + u_int32_t dsa; + int timeout; + int target, lun, tag, slot; + int newcmd = 0; + int doingready = 0; + + /* + * first make sure to read valid data + */ + siop_script_sync(sc, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + + /* + * The queue management here is a bit tricky: the script always looks + * at the slot from first to last, so if we always use the first + * free slot commands can stay at the tail of the queue ~forever. + * The algorithm used here is to restart from the head when we know + * that the queue is empty, and only add commands after the last one. + * When we're at the end of the queue wait for the script to clear it. + * The best thing to do here would be to implement a circular queue, + * but using only 53c720 features this can be "interesting". + * A mid-way solution could be to implement 2 queues and swap orders. + */ + slot = sc->sc_currschedslot; + /* + * If the instruction is 0x80000000 (JUMP foo, IF FALSE) the slot is + * free. As this is the last used slot, all previous slots are free, + * we can restart from 1. + * slot 0 is reserved for request sense commands. + */ + if (siop_script_read(sc, (Ent_script_sched_slot0 / 4) + slot * 2) == + 0x80000000) { + slot = sc->sc_currschedslot = 1; + } else { + slot++; + } + /* first handle commands from the urgent list */ + siop_cmd = TAILQ_FIRST(&sc->urgent_list); +again: + for (; siop_cmd != NULL; siop_cmd = next_siop_cmd) { + next_siop_cmd = TAILQ_NEXT(siop_cmd, next); +#ifdef DIAGNOSTIC + if (siop_cmd->status != CMDST_READY && + siop_cmd->status != CMDST_SENSE) + panic("siop: non-ready cmd in ready list"); +#endif + target = siop_cmd->xs->sc_link->target; + lun = siop_cmd->xs->sc_link->lun; + siop_lun = sc->targets[target]->siop_lun[lun]; + /* if non-tagged command active, wait */ + if (siop_lun->siop_tag[0].active != NULL) + continue; + /* + * if we're in a queue full condition don't start a new + * command, unless it's a request sense + */ + if ((siop_lun->lun_flags & SIOP_LUNF_FULL) && + siop_cmd->status == CMDST_READY) + continue; + /* find a free tag if needed */ + if (siop_cmd->flags & CMDFL_TAG) { + for (tag = 1; tag < SIOP_NTAG; tag++) { + if (siop_lun->siop_tag[tag].active == NULL) + break; + } + if (tag == SIOP_NTAG) /* no free tag */ + continue; + } else { + tag = 0; + } + siop_cmd->tag = tag; + /* + * find a free scheduler slot and load it. If it's a request + * sense we need to use slot 0. + */ + if (siop_cmd->status != CMDST_SENSE) { + for (; slot < SIOP_NSLOTS; slot++) { + /* + * If cmd if 0x80000000 the slot is free + */ + if (siop_script_read(sc, + (Ent_script_sched_slot0 / 4) + slot * 2) == + 0x80000000) + break; + } + /* no more free slot, no need to continue */ + if (slot == SIOP_NSLOTS) { + goto end; + } + } else { + slot = 0; + if (siop_script_read(sc, Ent_script_sched_slot0 / 4) + != 0x80000000) + goto end; + } + +#ifdef SIOP_DEBUG_SCHED + printf("using slot %d for DSA 0x%lx\n", slot, + (u_long)siop_cmd->dsa); +#endif + /* Ok, we can add the tag message */ + if (tag > 0) { +#ifdef DIAGNOSTIC + int msgcount = + letoh32(siop_cmd->siop_tables.t_msgout.count); + if (msgcount != 1) + printf("%s:%d:%d: tag %d with msgcount %d\n", + sc->sc_dev.dv_xname, target, lun, tag, + msgcount); +#endif + if (siop_cmd->xs->bp != NULL && + (siop_cmd->xs->bp->b_flags & B_ASYNC)) + siop_cmd->siop_tables.msg_out[1] = + MSG_SIMPLE_Q_TAG; + else + siop_cmd->siop_tables.msg_out[1] = + MSG_ORDERED_Q_TAG; + siop_cmd->siop_tables.msg_out[2] = tag; + siop_cmd->siop_tables.t_msgout.count = htole32(3); + } + /* note that we started a new command */ + newcmd = 1; + /* mark command as active */ + if (siop_cmd->status == CMDST_READY) { + siop_cmd->status = CMDST_ACTIVE; + } else if (siop_cmd->status == CMDST_SENSE) { + siop_cmd->status = CMDST_SENSE_ACTIVE; + } else + panic("siop_start: bad status"); + if (doingready) + TAILQ_REMOVE(&sc->ready_list, siop_cmd, next); + else + TAILQ_REMOVE(&sc->urgent_list, siop_cmd, next); + siop_lun->siop_tag[tag].active = siop_cmd; + /* patch scripts with DSA addr */ + dsa = siop_cmd->dsa; + /* first reselect switch, if we have an entry */ + if (siop_lun->siop_tag[tag].reseloff > 0) + siop_script_write(sc, + siop_lun->siop_tag[tag].reseloff + 1, + dsa + sizeof(struct siop_xfer_common) + + Ent_ldsa_reload_dsa); + /* CMD script: MOVE MEMORY addr */ + siop_cmd->siop_xfer->resel[E_ldsa_abs_slot_Used[0]] = + htole32(sc->sc_scriptaddr + Ent_script_sched_slot0 + + slot * 8); + siop_table_sync(siop_cmd, BUS_DMASYNC_PREWRITE); + /* scheduler slot: JUMP ldsa_select */ + siop_script_write(sc, + (Ent_script_sched_slot0 / 4) + slot * 2 + 1, + dsa + sizeof(struct siop_xfer_common) + Ent_ldsa_select); + /* handle timeout */ + if (siop_cmd->status == CMDST_ACTIVE) { + if ((siop_cmd->xs->flags & SCSI_POLL) == 0) { + /* start exire timer */ + timeout = (u_int64_t) siop_cmd->xs->timeout * + (u_int64_t)hz / 1000; + if (timeout == 0) + timeout = 1; + timeout_add(&siop_cmd->xs->stimeout, timeout); + } + } + /* + * Change JUMP cmd so that this slot will be handled + */ + siop_script_write(sc, (Ent_script_sched_slot0 / 4) + slot * 2, + 0x80080000); + /* if we're using the request sense slot, stop here */ + if (slot == 0) + goto end; + sc->sc_currschedslot = slot; + slot++; + } + if (doingready == 0) { + /* now process ready list */ + doingready = 1; + siop_cmd = TAILQ_FIRST(&sc->ready_list); + goto again; + } + +end: + /* if nothing changed no need to flush cache and wakeup script */ + if (newcmd == 0) + return; + /* make sure SCRIPT processor will read valid data */ + siop_script_sync(sc,BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + /* Signal script it has some work to do */ + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_SIGP); + /* and wait for IRQ */ + return; +} + +void +siop_timeout(v) + void *v; +{ + struct siop_cmd *siop_cmd = v; + struct siop_softc *sc = siop_cmd->siop_sc; + int s; + + sc_print_addr(siop_cmd->xs->sc_link); + printf("command timeout\n"); + + s = splbio(); + /* reset the scsi bus */ + siop_resetbus(sc); + + /* deactivate callout */ + timeout_del(&siop_cmd->xs->stimeout); + /* mark command as being timed out; siop_intr will handle it */ + /* + * mark command has being timed out and just return; + * the bus reset will generate an interrupt, + * it will be handled in siop_intr() + */ + siop_cmd->flags |= CMDFL_TIMEOUT; + splx(s); + return; + +} + +void +siop_dump_script(sc) + struct siop_softc *sc; +{ + int i; + for (i = 0; i < PAGE_SIZE / 4; i += 2) { + printf("0x%04x: 0x%08x 0x%08x", i * 4, + letoh32(sc->sc_script[i]), letoh32(sc->sc_script[i+1])); + if ((letoh32(sc->sc_script[i]) & 0xe0000000) == 0xc0000000) { + i++; + printf(" 0x%08x", letoh32(sc->sc_script[i+1])); + } + printf("\n"); + } +} + +int +siop_morecbd(sc) + struct siop_softc *sc; +{ + int error, i, j; + bus_dma_segment_t seg; + int rseg; + struct siop_cbd *newcbd; + bus_addr_t dsa; + u_int32_t *scr; + + /* allocate a new list head */ + newcbd = malloc(sizeof(struct siop_cbd), M_DEVBUF, M_NOWAIT); + if (newcbd == NULL) { + printf("%s: can't allocate memory for command descriptors " + "head\n", sc->sc_dev.dv_xname); + return ENOMEM; + } + memset(newcbd, 0, sizeof(struct siop_cbd)); + + /* allocate cmd list */ + newcbd->cmds = + malloc(sizeof(struct siop_cmd) * SIOP_NCMDPB, M_DEVBUF, M_NOWAIT); + if (newcbd->cmds == NULL) { + printf("%s: can't allocate memory for command descriptors\n", + sc->sc_dev.dv_xname); + error = ENOMEM; + goto bad3; + } + memset(newcbd->cmds, 0, sizeof(struct siop_cmd) * SIOP_NCMDPB); + error = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0, &seg, + 1, &rseg, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to allocate cbd DMA memory, error = %d\n", + sc->sc_dev.dv_xname, error); + goto bad2; + } + error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, PAGE_SIZE, + (caddr_t *)&newcbd->xfers, BUS_DMA_NOWAIT|BUS_DMA_COHERENT); + if (error) { + printf("%s: unable to map cbd DMA memory, error = %d\n", + sc->sc_dev.dv_xname, error); + goto bad2; + } + error = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE, 0, + BUS_DMA_NOWAIT, &newcbd->xferdma); + if (error) { + printf("%s: unable to create cbd DMA map, error = %d\n", + sc->sc_dev.dv_xname, error); + goto bad1; + } + error = bus_dmamap_load(sc->sc_dmat, newcbd->xferdma, newcbd->xfers, + PAGE_SIZE, NULL, BUS_DMA_NOWAIT); + if (error) { + printf("%s: unable to load cbd DMA map, error = %d\n", + sc->sc_dev.dv_xname, error); + goto bad0; + } +#ifdef DEBUG + printf("%s: alloc newcdb at PHY addr 0x%lx\n", sc->sc_dev.dv_xname, + (unsigned long)newcbd->xferdma->dm_segs[0].ds_addr); +#endif + + for (i = 0; i < SIOP_NCMDPB; i++) { + error = bus_dmamap_create(sc->sc_dmat, MAXPHYS, SIOP_NSG, + MAXPHYS, 0, BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW, + &newcbd->cmds[i].dmamap_data); + if (error) { + printf("%s: unable to create data DMA map for cbd: " + "error %d\n", + sc->sc_dev.dv_xname, error); + goto bad0; + } + error = bus_dmamap_create(sc->sc_dmat, + sizeof(struct scsi_generic), 1, + sizeof(struct scsi_generic), 0, + BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW, + &newcbd->cmds[i].dmamap_cmd); + if (error) { + printf("%s: unable to create cmd DMA map for cbd %d\n", + sc->sc_dev.dv_xname, error); + goto bad0; + } + newcbd->cmds[i].siop_sc = sc; + newcbd->cmds[i].siop_cbdp = newcbd; + newcbd->cmds[i].siop_xfer = &newcbd->xfers[i]; + memset(newcbd->cmds[i].siop_xfer, 0, + sizeof(struct siop_xfer)); + newcbd->cmds[i].dsa = newcbd->xferdma->dm_segs[0].ds_addr + + i * sizeof(struct siop_xfer); + dsa = newcbd->cmds[i].dsa; + newcbd->cmds[i].status = CMDST_FREE; + newcbd->cmds[i].siop_tables.t_msgout.count= htole32(1); + newcbd->cmds[i].siop_tables.t_msgout.addr = htole32(dsa); + newcbd->cmds[i].siop_tables.t_msgin.count= htole32(1); + newcbd->cmds[i].siop_tables.t_msgin.addr = htole32(dsa + 8); + newcbd->cmds[i].siop_tables.t_extmsgin.count= htole32(2); + newcbd->cmds[i].siop_tables.t_extmsgin.addr = htole32(dsa + 9); + newcbd->cmds[i].siop_tables.t_extmsgdata.addr = + htole32(dsa + 11); + newcbd->cmds[i].siop_tables.t_status.count= htole32(1); + newcbd->cmds[i].siop_tables.t_status.addr = htole32(dsa + 16); + + /* The select/reselect script */ + scr = &newcbd->cmds[i].siop_xfer->resel[0]; + for (j = 0; j < sizeof(load_dsa) / sizeof(load_dsa[0]); j++) + scr[j] = htole32(load_dsa[j]); + /* + * 0x78000000 is a 'move data8 to reg'. data8 is the second + * octet, reg offset is the third. + */ + scr[Ent_rdsa0 / 4] = + htole32(0x78100000 | ((dsa & 0x000000ff) << 8)); + scr[Ent_rdsa1 / 4] = + htole32(0x78110000 | ( dsa & 0x0000ff00 )); + scr[Ent_rdsa2 / 4] = + htole32(0x78120000 | ((dsa & 0x00ff0000) >> 8)); + scr[Ent_rdsa3 / 4] = + htole32(0x78130000 | ((dsa & 0xff000000) >> 16)); + scr[E_ldsa_abs_reselected_Used[0]] = + htole32(sc->sc_scriptaddr + Ent_reselected); + scr[E_ldsa_abs_reselect_Used[0]] = + htole32(sc->sc_scriptaddr + Ent_reselect); + scr[E_ldsa_abs_selected_Used[0]] = + htole32(sc->sc_scriptaddr + Ent_selected); + scr[E_ldsa_abs_data_Used[0]] = + htole32(dsa + sizeof(struct siop_xfer_common) + + Ent_ldsa_data); + /* JUMP foo, IF FALSE - used by MOVE MEMORY to clear the slot */ + scr[Ent_ldsa_data / 4] = htole32(0x80000000); + TAILQ_INSERT_TAIL(&sc->free_list, &newcbd->cmds[i], next); +#ifdef SIOP_DEBUG + printf("tables[%d]: in=0x%x out=0x%x status=0x%x\n", i, + letoh32(newcbd->cmds[i].siop_tables.t_msgin.addr), + letoh32(newcbd->cmds[i].siop_tables.t_msgout.addr), + letoh32(newcbd->cmds[i].siop_tables.t_status.addr)); +#endif + } + TAILQ_INSERT_TAIL(&sc->cmds, newcbd, next); + return 0; +bad0: + bus_dmamap_destroy(sc->sc_dmat, newcbd->xferdma); +bad1: + bus_dmamem_free(sc->sc_dmat, &seg, rseg); +bad2: + free(newcbd->cmds, M_DEVBUF); +bad3: + free(newcbd, M_DEVBUF); + return error; +} + +struct siop_lunsw * +siop_get_lunsw(sc) + struct siop_softc *sc; +{ + struct siop_lunsw *lunsw; + int i; + + if (sc->script_free_lo + (sizeof(lun_switch) / sizeof(lun_switch[0])) >= + sc->script_free_hi) + return NULL; + lunsw = TAILQ_FIRST(&sc->lunsw_list); + if (lunsw != NULL) { +#ifdef SIOP_DEBUG + printf("siop_get_lunsw got lunsw at offset %d\n", + lunsw->lunsw_off); +#endif + TAILQ_REMOVE(&sc->lunsw_list, lunsw, next); + return lunsw; + } + lunsw = malloc(sizeof(struct siop_lunsw), M_DEVBUF, M_NOWAIT); + if (lunsw == NULL) + return NULL; + memset(lunsw, 0, sizeof(struct siop_lunsw)); +#ifdef SIOP_DEBUG + printf("allocating lunsw at offset %d\n", sc->script_free_lo); +#endif + if (sc->features & SF_CHIP_RAM) { + bus_space_write_region_4(sc->sc_ramt, sc->sc_ramh, + sc->script_free_lo * 4, lun_switch, + sizeof(lun_switch) / sizeof(lun_switch[0])); + bus_space_write_4(sc->sc_ramt, sc->sc_ramh, + (sc->script_free_lo + E_abs_lunsw_return_Used[0]) * 4, + sc->sc_scriptaddr + Ent_lunsw_return); + } else { + for (i = 0; i < sizeof(lun_switch) / sizeof(lun_switch[0]); + i++) + sc->sc_script[sc->script_free_lo + i] = + htole32(lun_switch[i]); + sc->sc_script[sc->script_free_lo + E_abs_lunsw_return_Used[0]] = + htole32(sc->sc_scriptaddr + Ent_lunsw_return); + } + lunsw->lunsw_off = sc->script_free_lo; + lunsw->lunsw_size = sizeof(lun_switch) / sizeof(lun_switch[0]); + sc->script_free_lo += lunsw->lunsw_size; + if (sc->script_free_lo > 1024) + printf("%s: script_free_lo (%d) > 1024\n", sc->sc_dev.dv_xname, + sc->script_free_lo); + siop_script_sync(sc, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + return lunsw; +} + +void +siop_add_reselsw(sc, target) + struct siop_softc *sc; + int target; +{ + int i; + struct siop_lun *siop_lun; + /* + * add an entry to resel switch + */ + siop_script_sync(sc, BUS_DMASYNC_POSTWRITE); + for (i = 0; i < 15; i++) { + sc->targets[target]->reseloff = Ent_resel_targ0 / 4 + i * 2; + if ((siop_script_read(sc, sc->targets[target]->reseloff) & 0xff) + == 0xff) { /* it's free */ +#ifdef SIOP_DEBUG + printf("siop: target %d slot %d offset %d\n", + target, i, sc->targets[target]->reseloff); +#endif + /* JUMP abs_foo, IF target | 0x80; */ + siop_script_write(sc, sc->targets[target]->reseloff, + 0x800c0080 | target); + siop_script_write(sc, sc->targets[target]->reseloff + 1, + sc->sc_scriptaddr + + sc->targets[target]->lunsw->lunsw_off * 4 + + Ent_lun_switch_entry); + break; + } + } + if (i == 15) /* no free slot, shouldn't happen */ + panic("siop: resel switch full"); + + sc->sc_ntargets++; + for (i = 0; i < 8; i++) { + siop_lun = sc->targets[target]->siop_lun[i]; + if (siop_lun == NULL) + continue; + if (siop_lun->reseloff > 0) { + siop_lun->reseloff = 0; + siop_add_dev(sc, target, i); + } + } + siop_update_scntl3(sc, sc->targets[target]); + siop_script_sync(sc, BUS_DMASYNC_PREWRITE); +} + +void +siop_update_scntl3(sc, siop_target) + struct siop_softc *sc; + struct siop_target *siop_target; +{ + /* MOVE target->id >> 24 TO SCNTL3 */ + siop_script_write(sc, + siop_target->lunsw->lunsw_off + (Ent_restore_scntl3 / 4), + 0x78030000 | ((siop_target->id >> 16) & 0x0000ff00)); + /* MOVE target->id >> 8 TO SXFER */ + siop_script_write(sc, + siop_target->lunsw->lunsw_off + (Ent_restore_scntl3 / 4) + 2, + 0x78050000 | (siop_target->id & 0x0000ff00)); + siop_script_sync(sc, BUS_DMASYNC_PREWRITE); +} + +void +siop_add_dev(sc, target, lun) + struct siop_softc *sc; + int target; + int lun; +{ + struct siop_lunsw *lunsw; + struct siop_lun *siop_lun = sc->targets[target]->siop_lun[lun]; + int i, ntargets; + + if (siop_lun->reseloff > 0) + return; + lunsw = sc->targets[target]->lunsw; + if ((lunsw->lunsw_off + lunsw->lunsw_size) < sc->script_free_lo) { + /* + * can't extend this slot. Probably not worth trying to deal + * with this case + */ +#ifdef DEBUG + printf("%s:%d:%d: can't allocate a lun sw slot\n", + sc->sc_dev.dv_xname, target, lun); +#endif + return; + } + /* count how many free targets we still have to probe */ + ntargets = (sc->sc_link.adapter_buswidth - 1) - 1 - sc->sc_ntargets; + + /* + * we need 8 bytes for the lun sw additionnal entry, and + * eventually sizeof(tag_switch) for the tag switch entry. + * Keep enouth free space for the free targets that could be + * probed later. + */ + if (sc->script_free_lo + 2 + + (ntargets * sizeof(lun_switch) / sizeof(lun_switch[0])) >= + ((sc->targets[target]->flags & TARF_TAG) ? + sc->script_free_hi - (sizeof(tag_switch) / sizeof(tag_switch[0])) : + sc->script_free_hi)) { + /* + * not enouth space, probably not worth dealing with it. + * We can hold 13 tagged-queuing capable devices in the 4k RAM. + */ +#ifdef DEBUG + printf("%s:%d:%d: not enouth memory for a lun sw slot\n", + sc->sc_dev.dv_xname, target, lun); +#endif + return; + } +#ifdef SIOP_DEBUG + printf("%s:%d:%d: allocate lun sw entry\n", + sc->sc_dev.dv_xname, target, lun); +#endif + /* INT int_resellun */ + siop_script_write(sc, sc->script_free_lo, 0x98080000); + siop_script_write(sc, sc->script_free_lo + 1, A_int_resellun); + /* Now the slot entry: JUMP abs_foo, IF lun */ + siop_script_write(sc, sc->script_free_lo - 2, + 0x800c0000 | lun); + siop_script_write(sc, sc->script_free_lo - 1, 0); + siop_lun->reseloff = sc->script_free_lo - 2; + lunsw->lunsw_size += 2; + sc->script_free_lo += 2; + if (sc->targets[target]->flags & TARF_TAG) { + /* we need a tag switch */ + sc->script_free_hi -= + sizeof(tag_switch) / sizeof(tag_switch[0]); + if (sc->features & SF_CHIP_RAM) { + bus_space_write_region_4(sc->sc_ramt, sc->sc_ramh, + sc->script_free_hi * 4, tag_switch, + sizeof(tag_switch) / sizeof(tag_switch[0])); + } else { + for(i = 0; + i < sizeof(tag_switch) / sizeof(tag_switch[0]); + i++) { + sc->sc_script[sc->script_free_hi + i] = + htole32(tag_switch[i]); + } + } + siop_script_write(sc, + siop_lun->reseloff + 1, + sc->sc_scriptaddr + sc->script_free_hi * 4 + + Ent_tag_switch_entry); + + for (i = 0; i < SIOP_NTAG; i++) { + siop_lun->siop_tag[i].reseloff = + sc->script_free_hi + (Ent_resel_tag0 / 4) + i * 2; + } + } else { + /* non-tag case; just work with the lun switch */ + siop_lun->siop_tag[0].reseloff = + sc->targets[target]->siop_lun[lun]->reseloff; + } + siop_script_sync(sc, BUS_DMASYNC_PREWRITE); +} + +void +siop_del_dev(sc, target, lun) + struct siop_softc *sc; + int target; + int lun; +{ + int i; +#ifdef SIOP_DEBUG + printf("%s:%d:%d: free lun sw entry\n", + sc->sc_dev.dv_xname, target, lun); +#endif + if (sc->targets[target] == NULL) + return; + free(sc->targets[target]->siop_lun[lun], M_DEVBUF); + sc->targets[target]->siop_lun[lun] = NULL; + /* XXX compact sw entry too ? */ + /* check if we can free the whole target */ + for (i = 0; i < 8; i++) { + if (sc->targets[target]->siop_lun[i] != NULL) + return; + } +#ifdef SIOP_DEBUG + printf("%s: free siop_target for target %d lun %d lunsw offset %d\n", + sc->sc_dev.dv_xname, target, lun, + sc->targets[target]->lunsw->lunsw_off); +#endif + /* + * nothing here, free the target struct and resel + * switch entry + */ + siop_script_write(sc, sc->targets[target]->reseloff, 0x800c00ff); + siop_script_sync(sc, BUS_DMASYNC_PREWRITE); + TAILQ_INSERT_TAIL(&sc->lunsw_list, sc->targets[target]->lunsw, next); + free(sc->targets[target], M_DEVBUF); + sc->targets[target] = NULL; + sc->sc_ntargets--; +} + +#ifdef SIOP_STATS +void +siop_printstats() +{ + printf("siop_stat_intr %d\n", siop_stat_intr); + printf("siop_stat_intr_shortxfer %d\n", siop_stat_intr_shortxfer); + printf("siop_stat_intr_xferdisc %d\n", siop_stat_intr_xferdisc); + printf("siop_stat_intr_sdp %d\n", siop_stat_intr_sdp); + printf("siop_stat_intr_done %d\n", siop_stat_intr_done); + printf("siop_stat_intr_lunresel %d\n", siop_stat_intr_lunresel); + printf("siop_stat_intr_qfull %d\n", siop_stat_intr_qfull); +} +#endif diff --git a/sys/dev/ic/siop_common.c b/sys/dev/ic/siop_common.c new file mode 100644 index 00000000000..1300c91c117 --- /dev/null +++ b/sys/dev/ic/siop_common.c @@ -0,0 +1,568 @@ +/* $OpenBSD: siop_common.c,v 1.1 2001/02/15 04:07:58 krw Exp $ */ +/* $NetBSD: siop_common.c,v 1.12 2001/02/11 18:04:50 bouyer Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* SYM53c7/8xx PCI-SCSI I/O Processors driver */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/device.h> +#include <sys/malloc.h> +#include <sys/buf.h> +#include <sys/kernel.h> +#include <sys/scsiio.h> + +#include <machine/endian.h> +#include <machine/bus.h> + +#include <scsi/scsi_all.h> +#include <scsi/scsi_message.h> +#include <scsi/scsiconf.h> + +#include <dev/ic/siopreg.h> +#include <dev/ic/siopvar.h> +#include <dev/ic/siopvar_common.h> + +#undef DEBUG +#undef DEBUG_DR + +void +siop_common_reset(sc) + struct siop_softc *sc; +{ + u_int32_t stest3; + + /* reset the chip */ + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_SRST); + delay(1000); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, 0); + + /* init registers */ + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL0, + SCNTL0_ARB_MASK | SCNTL0_EPC | SCNTL0_AAP); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, 0); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, sc->clock_div); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER, 0); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DIEN, 0xff); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN0, + 0xff & ~(SIEN0_CMP | SIEN0_SEL | SIEN0_RSL)); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN1, + 0xff & ~(SIEN1_HTH | SIEN1_GEN)); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, 0); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, STEST3_TE); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STIME0, + (0xb << STIME0_SEL_SHIFT)); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCID, + sc->sc_link.adapter_target | SCID_RRE); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_RESPID0, + 1 << sc->sc_link.adapter_target); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DCNTL, + (sc->features & SF_CHIP_PF) ? DCNTL_COM | DCNTL_PFEN : DCNTL_COM); + + /* enable clock doubler or quadruler if appropriate */ + if (sc->features & (SF_CHIP_DBLR | SF_CHIP_QUAD)) { + stest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, + STEST1_DBLEN); + if (sc->features & SF_CHIP_QUAD) { + /* wait for PPL to lock */ + while ((bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_STEST4) & STEST4_LOCK) == 0) + delay(10); + } else { + /* data sheet says 20us - more won't hurt */ + delay(100); + } + /* halt scsi clock, select doubler/quad, restart clock */ + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, + stest3 | STEST3_HSC); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, + STEST1_DBLEN | STEST1_DBLSEL); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, stest3); + } else { + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, 0); + } + if (sc->features & SF_CHIP_FIFO) + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST5, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST5) | + CTEST5_DFS); + + sc->sc_reset(sc); +} + +/* prepare tables before sending a cmd */ +void +siop_setuptables(siop_cmd) + struct siop_cmd *siop_cmd; +{ + int i; + struct siop_softc *sc = siop_cmd->siop_sc; + struct scsi_xfer *xs = siop_cmd->xs; + int target = xs->sc_link->target; + int lun = xs->sc_link->lun; + + siop_cmd->siop_tables.id = htole32(sc->targets[target]->id); + memset(siop_cmd->siop_tables.msg_out, 0, 8); + if (siop_cmd->status != CMDST_SENSE) + siop_cmd->siop_tables.msg_out[0] = MSG_IDENTIFY(lun, 1); + else + siop_cmd->siop_tables.msg_out[0] = MSG_IDENTIFY(lun, 0); + siop_cmd->siop_tables.t_msgout.count= htole32(1); + if (sc->targets[target]->status == TARST_ASYNC) { + if (sc->targets[target]->flags & TARF_WIDE) { + sc->targets[target]->status = TARST_WIDE_NEG; + siop_wdtr_msg(siop_cmd, 1, MSG_EXT_WDTR_BUS_16_BIT); + } else if (sc->targets[target]->flags & TARF_SYNC) { + sc->targets[target]->status = TARST_SYNC_NEG; + siop_sdtr_msg(siop_cmd, 1, sc->minsync, sc->maxoff); + } else { + sc->targets[target]->status = TARST_OK; + } + } else if (sc->targets[target]->status == TARST_OK && + (sc->targets[target]->flags & TARF_TAG) && + siop_cmd->status != CMDST_SENSE) { + siop_cmd->flags |= CMDFL_TAG; + } + siop_cmd->siop_tables.status = + htole32(SCSI_SIOP_NOSTATUS); /* set invalid status */ + + siop_cmd->siop_tables.cmd.count = + htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_len); + siop_cmd->siop_tables.cmd.addr = + htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_addr); + if ((xs->flags & (SCSI_DATA_IN | SCSI_DATA_OUT)) || + siop_cmd->status == CMDST_SENSE) { + for (i = 0; i < siop_cmd->dmamap_data->dm_nsegs; i++) { + siop_cmd->siop_tables.data[i].count = + htole32(siop_cmd->dmamap_data->dm_segs[i].ds_len); + siop_cmd->siop_tables.data[i].addr = + htole32(siop_cmd->dmamap_data->dm_segs[i].ds_addr); + } + } + siop_table_sync(siop_cmd, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); +} + +int +siop_wdtr_neg(siop_cmd) + struct siop_cmd *siop_cmd; +{ + struct siop_softc *sc = siop_cmd->siop_sc; + struct siop_target *siop_target = siop_cmd->siop_target; + int target = siop_cmd->xs->sc_link->target; + struct siop_xfer_common *tables = &siop_cmd->siop_xfer->tables; + + if (siop_target->status == TARST_WIDE_NEG) { + /* we initiated wide negotiation */ + switch (tables->msg_in[3]) { + case MSG_EXT_WDTR_BUS_8_BIT: + printf("%s: target %d using 8bit transfers\n", + sc->sc_dev.dv_xname, target); + siop_target->flags &= ~TARF_ISWIDE; + sc->targets[target]->id &= ~(SCNTL3_EWS << 24); + break; + case MSG_EXT_WDTR_BUS_16_BIT: + if (siop_target->flags & TARF_WIDE) { + printf("%s: target %d using 16bit transfers\n", + sc->sc_dev.dv_xname, target); + siop_target->flags |= TARF_ISWIDE; + sc->targets[target]->id |= (SCNTL3_EWS << 24); + break; + } + /* FALLTHROUH */ + default: + /* + * hum, we got more than what we can handle, shoudn't + * happen. Reject, and stay async + */ + siop_target->flags &= ~TARF_ISWIDE; + siop_target->status = TARST_OK; + printf("%s: rejecting invalid wide negotiation from " + "target %d (%d)\n", sc->sc_dev.dv_xname, target, + tables->msg_in[3]); + tables->t_msgout.count= htole32(1); + tables->msg_out[0] = MSG_MESSAGE_REJECT; + return SIOP_NEG_MSGOUT; + } + tables->id = htole32(sc->targets[target]->id); + bus_space_write_1(sc->sc_rt, sc->sc_rh, + SIOP_SCNTL3, + (sc->targets[target]->id >> 24) & 0xff); + /* we now need to do sync */ + if (siop_target->flags & TARF_SYNC) { + siop_target->status = TARST_SYNC_NEG; + siop_sdtr_msg(siop_cmd, 0, sc->minsync, sc->maxoff); + return SIOP_NEG_MSGOUT; + } else { + siop_target->status = TARST_OK; + return SIOP_NEG_ACK; + } + } else { + /* target initiated wide negotiation */ + if (tables->msg_in[3] >= MSG_EXT_WDTR_BUS_16_BIT + && (siop_target->flags & TARF_WIDE)) { + printf("%s: target %d using 16bit transfers\n", + sc->sc_dev.dv_xname, target); + siop_target->flags |= TARF_ISWIDE; + sc->targets[target]->id |= SCNTL3_EWS << 24; + } else { + printf("%s: target %d using 8bit transfers\n", + sc->sc_dev.dv_xname, target); + siop_target->flags &= ~TARF_ISWIDE; + sc->targets[target]->id &= ~(SCNTL3_EWS << 24); + } + tables->id = htole32(sc->targets[target]->id); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, + (sc->targets[target]->id >> 24) & 0xff); + /* + * we did reset wide parameters, so fall back to async, + * but don't schedule a sync neg, target should initiate it + */ + siop_target->status = TARST_OK; + siop_wdtr_msg(siop_cmd, 0, (siop_target->flags & TARF_ISWIDE) ? + MSG_EXT_WDTR_BUS_16_BIT : MSG_EXT_WDTR_BUS_8_BIT); + return SIOP_NEG_MSGOUT; + } +} + +int +siop_sdtr_neg(siop_cmd) + struct siop_cmd *siop_cmd; +{ + struct siop_softc *sc = siop_cmd->siop_sc; + struct siop_target *siop_target = siop_cmd->siop_target; + int target = siop_cmd->xs->sc_link->target; + int sync, offset, i; + int send_msgout = 0; + struct siop_xfer_common *tables = &siop_cmd->siop_xfer->tables; + + sync = tables->msg_in[3]; + offset = tables->msg_in[4]; + + if (siop_target->status == TARST_SYNC_NEG) { + /* we initiated sync negotiation */ + siop_target->status = TARST_OK; +#ifdef DEBUG + printf("sdtr: sync %d offset %d\n", sync, offset); +#endif + if (offset > sc->maxoff || sync < sc->minsync || + sync > sc->maxsync) + goto reject; + for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]); + i++) { + if (sc->clock_period != scf_period[i].clock) + continue; + if (scf_period[i].period == sync) { + /* ok, found it. we now are sync. */ + printf("%s: target %d now synchronous at " + "%sMhz, offset %d\n", sc->sc_dev.dv_xname, + target, scf_period[i].rate, offset); + sc->targets[target]->id &= + ~(SCNTL3_SCF_MASK << 24); + sc->targets[target]->id |= scf_period[i].scf + << (24 + SCNTL3_SCF_SHIFT); + if (sync < 25) /* Ultra */ + sc->targets[target]->id |= + SCNTL3_ULTRA << 24; + else + sc->targets[target]->id &= + ~(SCNTL3_ULTRA << 24); + sc->targets[target]->id &= + ~(SXFER_MO_MASK << 8); + sc->targets[target]->id |= + (offset & SXFER_MO_MASK) << 8; + goto end; + } + } + /* + * we didn't find it in our table, do async and send reject + * msg + */ +reject: + send_msgout = 1; + tables->t_msgout.count= htole32(1); + tables->msg_out[0] = MSG_MESSAGE_REJECT; + printf("%s: target %d asynchronous\n", sc->sc_dev.dv_xname, + target); + sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24); + sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24); + sc->targets[target]->id &= ~(SXFER_MO_MASK << 8); + } else { /* target initiated sync neg */ +#ifdef DEBUG + printf("sdtr (target): sync %d offset %d\n", sync, offset); +#endif + if (offset == 0 || sync > sc->maxsync) { /* async */ + goto async; + } + if (offset > sc->maxoff) + offset = sc->maxoff; + if (sync < sc->minsync) + sync = sc->minsync; + /* look for sync period */ + for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]); + i++) { + if (sc->clock_period != scf_period[i].clock) + continue; + if (scf_period[i].period == sync) { + /* ok, found it. we now are sync. */ + printf("%s: target %d now synchronous at " + "%sMhz, offset %d\n", sc->sc_dev.dv_xname, + target, scf_period[i].rate, offset); + sc->targets[target]->id &= + ~(SCNTL3_SCF_MASK << 24); + sc->targets[target]->id |= scf_period[i].scf + << (24 + SCNTL3_SCF_SHIFT); + if (sync < 25) /* Ultra */ + sc->targets[target]->id |= + SCNTL3_ULTRA << 24; + else + sc->targets[target]->id &= + ~(SCNTL3_ULTRA << 24); + sc->targets[target]->id &= + ~(SXFER_MO_MASK << 8); + sc->targets[target]->id |= + (offset & SXFER_MO_MASK) << 8; + siop_sdtr_msg(siop_cmd, 0, sync, offset); + send_msgout = 1; + goto end; + } + } +async: + printf("%s: target %d asynchronous\n", + sc->sc_dev.dv_xname, target); + sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24); + sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24); + sc->targets[target]->id &= ~(SXFER_MO_MASK << 8); + siop_sdtr_msg(siop_cmd, 0, 0, 0); + send_msgout = 1; + } +end: +#ifdef DEBUG + printf("id now 0x%x\n", sc->targets[target]->id); +#endif + tables->id = htole32(sc->targets[target]->id); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, + (sc->targets[target]->id >> 24) & 0xff); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SXFER, + (sc->targets[target]->id >> 8) & 0xff); + if (send_msgout) { + return SIOP_NEG_MSGOUT; + } else { + return SIOP_NEG_ACK; + } +} + +void +siop_sdtr_msg(siop_cmd, offset, ssync, soff) + struct siop_cmd *siop_cmd; + int offset; + int ssync, soff; +{ + siop_cmd->siop_tables.msg_out[offset + 0] = MSG_EXTENDED; + siop_cmd->siop_tables.msg_out[offset + 1] = MSG_EXT_SDTR_LEN; + siop_cmd->siop_tables.msg_out[offset + 2] = MSG_EXT_SDTR; + siop_cmd->siop_tables.msg_out[offset + 3] = ssync; + siop_cmd->siop_tables.msg_out[offset + 4] = soff; + siop_cmd->siop_tables.t_msgout.count = + htole32(offset + MSG_EXT_SDTR_LEN + 2); +} + +void +siop_wdtr_msg(siop_cmd, offset, wide) + struct siop_cmd *siop_cmd; + int offset; +{ + siop_cmd->siop_tables.msg_out[offset + 0] = MSG_EXTENDED; + siop_cmd->siop_tables.msg_out[offset + 1] = MSG_EXT_WDTR_LEN; + siop_cmd->siop_tables.msg_out[offset + 2] = MSG_EXT_WDTR; + siop_cmd->siop_tables.msg_out[offset + 3] = wide; + siop_cmd->siop_tables.t_msgout.count = + htole32(offset + MSG_EXT_WDTR_LEN + 2); +} + +void +siop_minphys(bp) + struct buf *bp; +{ + minphys(bp); +} + +void +siop_sdp(siop_cmd) + struct siop_cmd *siop_cmd; +{ + /* save data pointer. Handle async only for now */ + int offset, dbc, sstat; + struct siop_softc *sc = siop_cmd->siop_sc; + scr_table_t *table; /* table to patch */ + + if ((siop_cmd->xs->flags & (SCSI_DATA_OUT | SCSI_DATA_IN)) + == 0) + return; /* no data pointers to save */ + offset = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCRATCHA + 1); + if (offset >= SIOP_NSG) { + printf("%s: bad offset in siop_sdp (%d)\n", + sc->sc_dev.dv_xname, offset); + return; + } + table = &siop_cmd->siop_xfer->tables.data[offset]; +#ifdef DEBUG_DR + printf("sdp: offset %d count=%d addr=0x%x ", offset, + table->count, table->addr); +#endif + dbc = bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DBC) & 0x00ffffff; + if (siop_cmd->xs->flags & SCSI_DATA_OUT) { + /* need to account stale data in FIFO */ + int dfifo = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DFIFO); + if (sc->features & SF_CHIP_FIFO) { + dfifo |= (bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_CTEST5) & CTEST5_BOMASK) << 8; + dbc += (dfifo - (dbc & 0x3ff)) & 0x3ff; + } else { + dbc += (dfifo - (dbc & 0x7f)) & 0x7f; + } + sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT0); + if (sstat & SSTAT0_OLF) + dbc++; + if (sstat & SSTAT0_ORF) + dbc++; + if (siop_cmd->siop_target->flags & TARF_ISWIDE) { + sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_SSTAT2); + if (sstat & SSTAT2_OLF1) + dbc++; + if (sstat & SSTAT2_ORF1) + dbc++; + } + /* clear the FIFO */ + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) | + CTEST3_CLF); + } + table->addr = + htole32(letoh32(table->addr) + letoh32(table->count) - dbc); + table->count = htole32(dbc); +#ifdef DEBUG_DR + printf("now count=%d addr=0x%x\n", table->count, table->addr); +#endif +} + +void +siop_clearfifo(sc) + struct siop_softc *sc; +{ + int timeout = 0; + int ctest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3); + +#ifdef DEBUG_INTR + printf("DMA fifo not empty !\n"); +#endif + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3, + ctest3 | CTEST3_CLF); + while ((bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) & + CTEST3_CLF) != 0) { + delay(1); + if (++timeout > 1000) { + printf("clear fifo failed\n"); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3, + bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_CTEST3) & ~CTEST3_CLF); + return; + } + } +} + +int +siop_modechange(sc) + struct siop_softc *sc; +{ + int retry; + int sist0, sist1, stest2, stest4; + for (retry = 0; retry < 5; retry++) { + /* + * datasheet says to wait 100ms and re-read SIST1, + * to check that DIFFSENSE is srable. + * We may delay() 5 times for 100ms at interrupt time; + * hopefully this will not happen often. + */ + delay(100000); + sist0 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST0); + sist1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST1); + if (sist1 & SIEN1_SBMC) + continue; /* we got an irq again */ + stest4 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST4) & + STEST4_MODE_MASK; + stest2 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2); + switch(stest4) { + case STEST4_MODE_DIF: + printf("%s: switching to differential mode\n", + sc->sc_dev.dv_xname); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, + stest2 | STEST2_DIF); + break; + case STEST4_MODE_SE: + printf("%s: switching to single-ended mode\n", + sc->sc_dev.dv_xname); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, + stest2 & ~STEST2_DIF); + break; + case STEST4_MODE_LVD: + printf("%s: switching to LVD mode\n", + sc->sc_dev.dv_xname); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, + stest2 & ~STEST2_DIF); + break; + default: + printf("%s: invalid SCSI mode 0x%x\n", + sc->sc_dev.dv_xname, stest4); + return 0; + } + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST0, + stest4 >> 2); + return 1; + } + printf("%s: timeout waiting for DIFFSENSE to stabilise\n", + sc->sc_dev.dv_xname); + return 0; +} + +void +siop_resetbus(sc) + struct siop_softc *sc; +{ + int scntl1; + scntl1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, + scntl1 | SCNTL1_RST); + /* minimum 25 us, more time won't hurt */ + delay(100); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, scntl1); +} diff --git a/sys/dev/ic/siopreg.h b/sys/dev/ic/siopreg.h new file mode 100644 index 00000000000..739afca27f5 --- /dev/null +++ b/sys/dev/ic/siopreg.h @@ -0,0 +1,377 @@ +/* $OpenBSD: siopreg.h,v 1.1 2001/02/15 04:07:58 krw Exp $ */ +/* $NetBSD: siopreg.h,v 1.7 2000/10/06 16:35:13 bouyer Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * Devices definitions for Symbios/NCR M53c8xx PCI-SCSI I/O Processors + * Docs available from http://www.symbios.com/ + */ + +#define SIOP_SCNTL0 0x00 /* SCSI control 0, R/W */ +#define SCNTL0_ARB_MASK 0xc0 +#define SCNTL0_SARB 0x00 +#define SCNTL0_FARB 0xc0 +#define SCNTL0_START 0x20 +#define SCNTL0_WATM 0x10 +#define SCNTL0_EPC 0x08 +#define SCNTL0_AAP 0x02 +#define SCNTL0_TRG 0x01 + +#define SIOP_SCNTL1 0x01 /* SCSI control 1, R/W */ +#define SCNTL1_EXC 0x80 +#define SCNTL1_ADB 0x40 +#define SCNTL1_DHP 0x20 +#define SCNTL1_CON 0x10 +#define SCNTL1_RST 0x08 +#define SCNTL1_AESP 0x04 +#define SCNTL1_IARB 0x02 +#define SCNTL1_SST 0x01 + +#define SIOP_SCNTL2 0x02 /* SCSI control 2, R/W */ +#define SCNTL2_SDU 0x80 +#define SCNTL2_CHM 0x40 /* 875 only */ +#define SCNTL2_SLPMD 0x20 /* 875 only */ +#define SCNTL2_SLPHBEN 0x10 /* 875 only */ +#define SCNTL2_WSS 0x08 /* 875 only */ +#define SCNTL2_VUE0 0x04 /* 875 only */ +#define SCNTL2_VUE1 0x02 /* 875 only */ +#define SCNTL2_WSR 0x01 /* 875 only */ + +#define SIOP_SCNTL3 0x03 /* SCSI control 3, R/W */ +#define SCNTL3_ULTRA 0x80 /* 875 only */ +#define SCNTL3_SCF_SHIFT 4 +#define SCNTL3_SCF_MASK 0x70 +#define SCNTL3_EWS 0x08 /* 875 only */ +#define SCNTL3_CCF_SHIFT 0 +#define SCNTL3_CCF_MASK 0x07 + +/* periods for various SCF values, assume transfer period of 4 */ +struct scf_period { + int clock; /* clock period (ns * 10) */ + int period; /* scsi period, as set in the SDTR message */ + int scf; /* scf value to use */ + char *rate; /* the resulting rate */ +}; + +static const struct scf_period scf_period[] __attribute__((__unused__)) = { + {250, 25, 1, "10.0"}, + {250, 37, 2, "6.67"}, + {250, 50, 3, "5.0"}, + {250, 75, 4, "3.33"}, + {125, 12, 1, "20.0"}, + {125, 18, 2, "13.33"}, + {125, 25, 3, "10.0"}, + {125, 37, 4, "6.67"}, + {125, 50, 5, "5.0"}, + { 62, 10, 1, "40.0"}, + { 62, 12, 3, "20.0"}, + { 62, 18, 4, "13.3"}, + { 62, 25, 5, "10.0"}, +}; + +#define SIOP_SCID 0x04 /* SCSI chip ID R/W */ +#define SCID_RRE 0x40 +#define SCID_SRE 0x20 +#define SCID_ENCID_SHIFT 0 +#define SCID_ENCID_MASK 0x07 + +#define SIOP_SXFER 0x05 /* SCSI transfer, R/W */ +#define SXFER_TP_SHIFT 5 +#define SXFER_TP_MASK 0xe0 +#define SXFER_MO_SHIFT 0 +#define SXFER_MO_MASK 0x1f + +#define SIOP_SDID 0x06 /* SCSI destiation ID, R/W */ +#define SDID_ENCID_SHIFT 0 +#define SDID_ENCID_MASK 0x07 + +#define SIOP_GPREG 0x07 /* General purpose, R/W */ +#define GPREG_GPIO4 0x10 /* 875 only */ +#define GPREG_GPIO3 0x08 /* 875 only */ +#define GPREG_GPIO2 0x04 /* 875 only */ +#define GPREG_GPIO1 0x02 +#define GPREG_GPIO0 0x01 + +#define SIOP_SFBR 0x08 /* SCSI first byte received, R/W */ + +#define SIOP_SOCL 0x09 /* SCSI output control latch, RW */ + +#define SIOP_SSID 0x0A /* SCSI selector ID, RO */ +#define SSID_VAL 0x80 +#define SSID_ENCID_SHIFT 0 +#define SSID_ENCID_MASK 0x0f + +#define SIOP_SBCL 0x0B /* SCSI control line, RO */ + +#define SIOP_DSTAT 0x0C /* DMA status, RO */ +#define DSTAT_DFE 0x80 +#define DSTAT_MDPE 0x40 +#define DSTAT_BF 0x20 +#define DSTAT_ABRT 0x10 +#define DSTAT_SSI 0x08 +#define DSTAT_SIR 0x04 +#define DSTAT_IID 0x01 + +#define SIOP_SSTAT0 0x0D /* STSI status 0, RO */ +#define SSTAT0_ILF 0x80 +#define SSTAT0_ORF 0x40 +#define SSTAT0_OLF 0x20 +#define SSTAT0_AIP 0x10 +#define SSTAT0_LOA 0x08 +#define SSTAT0_WOA 0x04 +#define SSTAT0_RST 0x02 +#define SSTAT0_SDP 0x01 + +#define SIOP_SSTAT1 0x0E /* STSI status 1, RO */ +#define SSTAT1_FFO_SHIFT 4 +#define SSTAT1_FFO_MASK 0x80 +#define SSTAT1_SDPL 0x08 +#define SSTAT1_MSG 0x04 +#define SSTAT1_CD 0x02 +#define SSTAT1_IO 0x01 +#define SSTAT1_PHASE_MASK (SSTAT1_IO | SSTAT1_CD | SSTAT1_MSG) +#define SSTAT1_PHASE_DATAOUT 0 +#define SSTAT1_PHASE_DATAIN SSTAT1_IO +#define SSTAT1_PHASE_CMD SSTAT1_CD +#define SSTAT1_PHASE_STATUS (SSTAT1_CD | SSTAT1_IO) +#define SSTAT1_PHASE_MSGOUT (SSTAT1_MSG | SSTAT1_CD) +#define SSTAT1_PHASE_MSGIN (SSTAT1_MSG | SSTAT1_CD | SSTAT1_IO) + +#define SIOP_SSTAT2 0x0F /* STSI status 2, RO */ +#define SSTAT2_ILF1 0x80 /* 875 only */ +#define SSTAT2_ORF1 0x40 /* 875 only */ +#define SSTAT2_OLF1 0x20 /* 875 only */ +#define SSTAT2_FF4 0x10 /* 875 only */ +#define SSTAT2_SPL1 0x08 /* 875 only */ +#define SSTAT2_DF 0x04 /* 875 only */ +#define SSTAT2_LDSC 0x02 +#define SSTAT2_SDP1 0x01 /* 875 only */ + +#define SIOP_DSA 0x10 /* data struct addr, R/W */ + +#define SIOP_ISTAT 0x14 /* IRQ status, R/W */ +#define ISTAT_ABRT 0x80 +#define ISTAT_SRST 0x40 +#define ISTAT_SIGP 0x20 +#define ISTAT_SEM 0x10 +#define ISTAT_CON 0x08 +#define ISTAT_INTF 0x04 +#define ISTAT_SIP 0x02 +#define ISTAT_DIP 0x01 + +#define SIOP_CTEST0 0x18 /* Chip test 0, R/W */ + +#define SIOP_CTEST1 0x19 /* Chip test 1, R/W */ + +#define SIOP_CTEST2 0x1A /* Chip test 2, R/W */ +#define CTEST2_SRTCH 0x04 /* 875 only */ + +#define SIOP_CTEST3 0x1B /* Chip test 3, R/W */ +#define CTEST3_FLF 0x08 +#define CTEST3_CLF 0x04 +#define CTEST3_FM 0x02 +#define CTEST3_WRIE 0x01 + +#define SIOP_TEMP 0x1C /* Temp register (used by CALL/RET), R/W */ + +#define SIOP_DFIFO 0x20 /* DMA FIFO */ + +#define SIOP_CTEST4 0x21 /* Chip test 4, R/W */ +#define CTEST4_BDIS 0x80 +#define CTEST_ZMOD 0x40 +#define CTEST_ZSD 0x20 +#define CTEST_SRTM 0x10 +#define CTEST_MPEE 0x08 + +#define SIOP_CTEST5 0x22 /* Chip test 5, R/W */ +#define CTEST5_ADCK 0x80 +#define CTEST5_BBCK 0x40 +#define CTEST5_DFS 0x20 +#define CTEST5_MASR 0x10 +#define CTEST5_DDIR 0x08 +#define CTEST5_BOMASK 0x03 + +#define SIOP_CTEST6 0x23 /* Chip test 6, R/W */ + +#define SIOP_DBC 0x24 /* DMA byte counter, R/W */ + +#define SIOP_DCMD 0x27 /* DMA command, R/W */ + +#define SIOP_DNAD 0x28 /* DMA next addr, R/W */ + +#define SIOP_DSP 0x2C /* DMA scripts pointer, R/W */ + +#define SIOP_DSPS 0x30 /* DMA scripts pointer save, R/W */ + +#define SIOP_SCRATCHA 0x34 /* scratch register A. R/W */ + +#define SIOP_DMODE 0x38 /* DMA mode, R/W */ +#define DMODE_BL_SHIFT 6 +#define DMODE_BL_MASK 0xC0 +#define DMODE_SIOM 0x20 +#define DMODE_DIOM 0x10 +#define DMODE_ERL 0x08 +#define DMODE_ERMP 0x04 +#define DMODE_BOF 0x02 +#define DMODE_MAN 0x01 + +#define SIOP_DIEN 0x39 /* DMA interrupt enable, R/W */ +#define DIEN_MDPE 0x40 +#define DIEN_BF 0x20 +#define DIEN_AVRT 0x10 +#define DIEN_SSI 0x08 +#define DIEN_SIR 0x04 +#define DIEN_IID 0x01 + +#define SIOP_SBR 0x3A /* scratch byte register, R/W */ + +#define SIOP_DCNTL 0x3B /* DMA control, R/W */ +#define DCNTL_CLSE 0x80 +#define DCNTL_PFF 0x40 +#define DCNTL_PFEN 0x20 +#define DCNTL_SSM 0x10 +#define DCNTL_IRQM 0x08 +#define DCNTL_STD 0x04 +#define DCNTL_IRQD 0x02 +#define DCNTL_COM 0x01 + +#define SIOP_ADDER 0x3C /* adder output sum, RO */ + +#define SIOP_SIEN0 0x40 /* SCSI interrupt enable 0, R/W */ +#define SIEN0_MA 0x80 +#define SIEN0_CMP 0x40 +#define SIEN0_SEL 0x20 +#define SIEN0_RSL 0x10 +#define SIEN0_SGE 0x08 +#define SIEN0_UDC 0x04 +#define SIEN0_SRT 0x02 +#define SIEN0_PAR 0x01 + +#define SIOP_SIEN1 0x41 /* SCSI interrupt enable 1, R/W */ +#define SIEN1_SBMC 0x10 /* 895 only */ +#define SIEN1_STO 0x04 +#define SIEN1_GEN 0x02 +#define SIEN1_HTH 0x01 + +#define SIOP_SIST0 0x42 /* SCSI interrupt status 0, RO */ +#define SIST0_MA 0x80 +#define SIST0_CMP 0x40 +#define SIST0_SEL 0x20 +#define SIST0_RSL 0x10 +#define SIST0_SGE 0x08 +#define SIST0_UDC 0x04 +#define SIST0_RST 0x02 +#define SIST0_PAR 0x01 + +#define SIOP_SIST1 0x43 /* SCSI interrut status 1, RO */ +#define SIST1_SBMC 0x10 /* 895 only */ +#define SIST1_STO 0x04 +#define SIST1_GEN 0x02 +#define SIST1_HTH 0x01 + +#define SIOP_SLPAR 0x44 /* scsi longitudinal parity, R/W */ + +#define SIOP_SWIDE 0x45 /* scsi wide residue, RW, 875 only */ + +#define SIOP_MACNTL 0x46 /* memory access control, R/W */ + +#define SIOP_GPCNTL 0x47 /* General Purpose Pin control, R/W */ +#define GPCNTL_ME 0x80 /* 875 only */ +#define GPCNTL_FE 0x40 /* 875 only */ +#define GPCNTL_IN4 0x10 /* 875 only */ +#define GPCNTL_IN3 0x08 /* 875 only */ +#define GPCNTL_IN2 0x04 /* 875 only */ +#define GPCNTL_IN1 0x02 +#define GPCNTL_IN0 0x01 + +#define SIOP_STIME0 0x48 /* SCSI timer 0, R/W */ +#define STIME0_HTH_SHIFT 4 +#define STIME0_HTH_MASK 0xf0 +#define STIME0_SEL_SHIFT 0 +#define STIME0_SEL_MASK 0x0f + +#define SIOP_STIME1 0x49 /* SCSI timer 1, R/W */ +#define STIME1_HTHBA 0x40 /* 875 only */ +#define STIME1_GENSF 0x20 /* 875 only */ +#define STIME1_HTHSF 0x10 /* 875 only */ +#define STIME1_GEN_SHIFT 0 +#define STIME1_GEN_MASK 0x0f + +#define SIOP_RESPID0 0x4A /* response ID, R/W */ + +#define SIOP_RESPID1 0x4B /* response ID, R/W, 875-only */ + +#define SIOP_STEST0 0x4C /* SCSI test 0, RO */ + +#define SIOP_STEST1 0x4D /* SCSI test 1, RO, RW on 875 */ +#define STEST1_DBLEN 0x08 /* 875-only */ +#define STEST1_DBLSEL 0x04 /* 875-only */ + +#define SIOP_STEST2 0x4E /* SCSI test 2, RO, R/W on 875 */ +#define STEST2_DIF 0x20 /* 875 only */ +#define STEST2_EXT 0x02 + +#define SIOP_STEST3 0x4F /* SCSI test 3, RO, RW on 875 */ +#define STEST3_TE 0x80 +#define STEST3_HSC 0x20 + +#define SIOP_STEST4 0x52 /* SCSI test 4, 895 only */ +#define STEST4_MODE_MASK 0xc0 +#define STEST4_MODE_DIF 0x40 +#define STEST4_MODE_SE 0x80 +#define STEST4_MODE_LVD 0xc0 +#define STEST4_LOCK 0x20 +#define STEST4_ + +#define SIOP_SIDL 0x50 /* SCSI input data latch, RO */ + +#define SIOP_SODL 0x54 /* SCSI output data latch, R/W */ + +#define SIOP_SBDL 0x58 /* SCSI bus data lines, RO */ + +#define SIOP_SCRATCHB 0x5C /* Scratch register B, R/W */ + +#define SIOP_SCRATCHC 0x60 /* Scratch register C, R/W, 875 only */ + +#define SIOP_SCRATCHD 0x64 /* Scratch register D, R/W, 875-only */ + +#define SIOP_SCRATCHE 0x68 /* Scratch register E, R/W, 875-only */ + +#define SIOP_SCRATCHF 0x6c /* Scratch register F, R/W, 875-only */ + +#define SIOP_SCRATCHG 0x70 /* Scratch register G, R/W, 875-only */ + +#define SIOP_SCRATCHH 0x74 /* Scratch register H, R/W, 875-only */ + +#define SIOP_SCRATCHI 0x78 /* Scratch register I, R/W, 875-only */ + +#define SIOP_SCRATCHJ 0x7c /* Scratch register J, R/W, 875-only */ diff --git a/sys/dev/ic/siopvar.h b/sys/dev/ic/siopvar.h new file mode 100644 index 00000000000..c4b99252067 --- /dev/null +++ b/sys/dev/ic/siopvar.h @@ -0,0 +1,99 @@ +/* $OpenBSD: siopvar.h,v 1.1 2001/02/15 04:07:58 krw Exp $ */ +/* $NetBSD: siopvar.h,v 1.13 2000/10/23 23:18:11 bouyer Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* structure and definitions for the siop driver */ + +TAILQ_HEAD(cmd_list, siop_cmd); +TAILQ_HEAD(cbd_list, siop_cbd); +TAILQ_HEAD(lunsw_list, siop_lunsw); + +/* Driver internal state */ +struct siop_softc { + struct device sc_dev; + struct scsi_link sc_link; /* link to upper level */ + int features; /* chip's features */ + int ram_size; + int maxburst; + int maxoff; + int clock_div; /* async. clock divider (scntl3) */ + int clock_period; /* clock period (ns * 10) */ + int minsync; /* min and max sync period, */ + int maxsync; /* as sent in SDTR message */ + bus_space_tag_t sc_rt; /* bus_space registers tag */ + bus_space_handle_t sc_rh; /* bus_space registers handle */ + bus_addr_t sc_raddr; /* register adresses */ + bus_space_tag_t sc_ramt; /* bus_space ram tag */ + bus_space_handle_t sc_ramh; /* bus_space ram handle */ + bus_dma_tag_t sc_dmat; /* bus DMA tag */ + void (*sc_reset) __P((struct siop_softc*)); /* reset callback */ + bus_dmamap_t sc_scriptdma; /* DMA map for script */ + bus_addr_t sc_scriptaddr; /* on-board ram or physical adress */ + u_int32_t *sc_script; /* script location in memory */ + int sc_currschedslot; /* current scheduler slot */ + struct cbd_list cmds; /* list of command block descriptors */ + struct cmd_list free_list; /* cmd descr free list */ + struct cmd_list urgent_list; /* hitgh priority cmd descr list */ + struct cmd_list ready_list; /* cmd descr ready list */ + struct lunsw_list lunsw_list; /* lunsw free list */ + u_int32_t script_free_lo; /* free ram offset from sc_scriptaddr */ + u_int32_t script_free_hi; /* free ram offset from sc_scriptaddr */ + struct siop_target *targets[16]; /* per-target states */ + int sc_ntargets; /* number of known targets */ + u_int32_t sc_flags; +}; +/* defs for sc_flags */ +/* none for now */ + +/* features */ +#define SF_BUS_WIDE 0x00000001 /* wide bus */ +#define SF_BUS_ULTRA 0x00000002 /* Ultra (20Mhz) bus */ +#define SF_BUS_ULTRA2 0x00000004 /* Ultra2 (40Mhz) bus */ +#define SF_BUS_DIFF 0x00000008 /* differential bus */ + +#define SF_CHIP_LED0 0x00000100 /* led on GPIO0 */ +#define SF_CHIP_DBLR 0x00000200 /* clock doubler */ +#define SF_CHIP_QUAD 0x00000400 /* clock quadrupler */ +#define SF_CHIP_FIFO 0x00000800 /* large fifo */ +#define SF_CHIP_PF 0x00001000 /* Intructions prefetch */ +#define SF_CHIP_RAM 0x00002000 /* on-board RAM */ +#define SF_CHIP_LS 0x00004000 /* load/store instruction */ +#define SF_CHIP_10REGS 0x00008000 /* 10 scratch registers */ + +#define SF_PCI_RL 0x01000000 /* PCI read line */ +#define SF_PCI_RM 0x02000000 /* PCI read multiple */ +#define SF_PCI_BOF 0x04000000 /* PCI burst opcode fetch */ +#define SF_PCI_CLS 0x08000000 /* PCI cache line size */ +#define SF_PCI_WRI 0x10000000 /* PCI write and invalidate */ + +void siop_attach __P((struct siop_softc *)); +int siop_intr __P((void *)); diff --git a/sys/dev/ic/siopvar_common.h b/sys/dev/ic/siopvar_common.h new file mode 100644 index 00000000000..d4d30c3d0a1 --- /dev/null +++ b/sys/dev/ic/siopvar_common.h @@ -0,0 +1,200 @@ +/* $OpenBSD: siopvar_common.h,v 1.1 2001/02/15 04:07:59 krw Exp $ */ +/* $NetBSD: siopvar_common.h,v 1.10 2001/01/26 21:58:56 bouyer Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* common struct and routines used by siop and esiop */ + +#ifndef SIOP_DEFAULT_TARGET +#define SIOP_DEFAULT_TARGET 7 +#endif + +/* tables used by SCRIPT */ +typedef struct scr_table { + u_int32_t count; + u_int32_t addr; +} scr_table_t ; + +/* Number of scatter/gather entries */ +#define SIOP_NSG (MAXPHYS/NBPG + 1) /* XXX NBPG */ + +/* Number of tag */ +#define SIOP_NTAG 16 + +/* + * This structure interfaces the SCRIPT with the driver; it describes a full + * transfer. + */ +struct siop_xfer_common { + u_int8_t msg_out[8]; /* 0 */ + u_int8_t msg_in[8]; /* 8 */ + u_int32_t status; /* 16 */ + u_int32_t pad1; /* 20 */ + u_int32_t id; /* 24 */ + u_int32_t pad2; /* 28 */ + scr_table_t t_msgin; /* 32 */ + scr_table_t t_extmsgin; /* 40 */ + scr_table_t t_extmsgdata; /* 48 */ + scr_table_t t_msgout; /* 56 */ + scr_table_t cmd; /* 64 */ + scr_table_t t_status; /* 72 */ + scr_table_t data[SIOP_NSG]; /* 80 */ +} __attribute__((__packed__)); + +/* status can hold the SCSI_* status values, and 2 additionnal values: */ +#define SCSI_SIOP_NOCHECK 0xfe /* don't check the scsi status */ +#define SCSI_SIOP_NOSTATUS 0xff /* device didn't report status */ + +/* xfer description of the script: tables and reselect script */ +struct siop_xfer { + struct siop_xfer_common tables; + /* u_int32_t resel[sizeof(load_dsa) / sizeof(load_dsa[0])]; */ + u_int32_t resel[25]; +} __attribute__((__packed__)); + +/* + * This decribes a command handled by the SCSI controller + * These are chained in either a free list or a active list + * We have one queue per target + */ +struct siop_cmd { + TAILQ_ENTRY (siop_cmd) next; + struct siop_softc *siop_sc; /* points back to our adapter */ + struct siop_target *siop_target; /* pointer to our target def */ + struct scsi_xfer *xs; /* xfer from the upper level */ + struct siop_xfer *siop_xfer; /* tables dealing with this xfer */ +#define siop_tables siop_xfer->tables + struct siop_cbd *siop_cbdp; /* pointer to our siop_cbd */ + bus_addr_t dsa; /* DSA value to load */ + bus_dmamap_t dmamap_cmd; + bus_dmamap_t dmamap_data; + struct scsi_sense rs_cmd; /* request sense command buffer */ + int status; + int flags; + int reselslot; /* the reselect slot used */ + int tag; /* tag used for tagged command queuing */ +}; + +/* command block descriptors: an array of siop_cmd + an array of siop_xfer */ + +struct siop_cbd { + TAILQ_ENTRY (siop_cbd) next; + struct siop_cmd *cmds; + struct siop_xfer *xfers; + bus_dmamap_t xferdma; /* DMA map for this block of xfers */ +}; + +/* status defs */ +#define CMDST_FREE 0 /* cmd slot is free */ +#define CMDST_READY 1 /* cmd slot is waiting for processing */ +#define CMDST_ACTIVE 2 /* cmd slot is being processed */ +#define CMDST_SENSE 3 /* cmd slot is being requesting sense */ +#define CMDST_SENSE_ACTIVE 4 /* request sense active */ +#define CMDST_SENSE_DONE 5 /* request sense done */ +#define CMDST_DONE 6 /* cmd slot has been processed */ +/* flags defs */ +#define CMDFL_TIMEOUT 0x0001 /* cmd timed out */ +#define CMDFL_TAG 0x0002 /* tagged cmd */ + +/* per-tag struct */ +struct siop_tag { + struct siop_cmd *active; /* active command */ + u_int reseloff; /* XXX */ +}; + +/* per lun struct */ +struct siop_lun { + struct siop_tag siop_tag[SIOP_NTAG]; /* tag array */ + int lun_flags; /* per-lun flags, see below */ + u_int reseloff; /* XXX */ +}; + +#define SIOP_LUNF_FULL 0x01 /* queue full message */ + +/* per-target struct */ +struct siop_target { + int status; /* target status, see below */ + int flags; /* target flags, see below */ + u_int32_t id; /* for SELECT FROM */ + struct siop_lun *siop_lun[8]; /* per-lun state */ + u_int reseloff; /* XXX */ + struct siop_lunsw *lunsw; /* XXX */ +}; + +/* target status */ +#define TARST_PROBING 0 /* target is being probed */ +#define TARST_ASYNC 1 /* target needs sync/wide negotiation */ +#define TARST_WIDE_NEG 2 /* target is doing wide negotiation */ +#define TARST_SYNC_NEG 3 /* target is doing sync negotiation */ +#define TARST_OK 4 /* sync/wide agreement is valid */ + +/* target flags */ +#define TARF_SYNC 0x01 /* target can do sync */ +#define TARF_WIDE 0x02 /* target can do wide */ +#define TARF_TAG 0x04 /* target can do tags */ +#define TARF_ISWIDE 0x08 /* target is wide */ + +struct siop_lunsw { + TAILQ_ENTRY (siop_lunsw) next; + u_int32_t lunsw_off; /* offset of this lun sw, from sc_scriptaddr*/ + u_int32_t lunsw_size; /* size of this lun sw */ +}; + +static __inline__ void siop_table_sync __P((struct siop_cmd *, int)); +static __inline__ void +siop_table_sync(siop_cmd, ops) + struct siop_cmd *siop_cmd; + int ops; +{ + struct siop_softc *sc = siop_cmd->siop_sc; + bus_dmamap_sync(sc->sc_dmat, siop_cmd->siop_cbdp->xferdma, ops); +} + +void siop_common_reset __P((struct siop_softc *)); +void siop_setuptables __P((struct siop_cmd *)); +int siop_modechange __P((struct siop_softc *)); + +int siop_wdtr_neg __P((struct siop_cmd *)); +int siop_sdtr_neg __P((struct siop_cmd *)); +void siop_sdtr_msg __P((struct siop_cmd *, int, int, int)); +void siop_wdtr_msg __P((struct siop_cmd *, int, int)); +/* actions to take at return of siop_wdtr_neg() and siop_sdtr_neg() */ +#define SIOP_NEG_NOP 0x0 +#define SIOP_NEG_MSGOUT 0x1 +#define SIOP_NEG_ACK 0x2 + +void siop_minphys __P((struct buf *)); +void siop_sdp __P((struct siop_cmd *)); +void siop_clearfifo __P((struct siop_softc *)); +void siop_resetbus __P((struct siop_softc *)); +/* XXXX should be callbacks */ +void siop_add_dev __P((struct siop_softc *, int, int)); +void siop_del_dev __P((struct siop_softc *, int, int)); diff --git a/sys/dev/microcode/siop/Makefile b/sys/dev/microcode/siop/Makefile new file mode 100644 index 00000000000..39dfe3d8df8 --- /dev/null +++ b/sys/dev/microcode/siop/Makefile @@ -0,0 +1,17 @@ +# $OpenBSD: Makefile,v 1.1 2001/02/15 04:07:59 krw Exp $ +# $NetBSD: Makefile,v 1.1 2000/04/21 17:57:01 bouyer Exp $ + +all: siop.out + +PROG= ncr53cxxx +MKSHARE=no +MAN= + +.include <bsd.prog.mk> + +regen: siop.out +headers: siop.out + +siop.out: siop.ss ${PROG} + ./${PROG} siop.ss -o siop.out + diff --git a/sys/dev/microcode/siop/ncr53cxxx.c b/sys/dev/microcode/siop/ncr53cxxx.c new file mode 100644 index 00000000000..b736a00cd44 --- /dev/null +++ b/sys/dev/microcode/siop/ncr53cxxx.c @@ -0,0 +1,1395 @@ +/* $OpenBSD: ncr53cxxx.c,v 1.1 2001/02/15 04:07:59 krw Exp $ */ +/* $NetBSD: ncr53cxxx.c,v 1.5 2000/10/23 14:51:51 bouyer Exp $ */ + +/* + * Copyright (c) 1995,1999 Michael L. Hitch + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Michael L. Hitch. + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* ncr53cxxx.c - SCSI SCRIPTS Assembler */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <time.h> + +#ifndef AMIGA +#define strcmpi strcasecmp +#endif + +#define MAXTOKENS 16 +#define MAXINST 1024 +#define MAXSYMBOLS 128 + +struct { + int type; + char *name; +} tokens[MAXTOKENS]; +int ntokens; +int tokenix; + +void f_proc (void); +void f_pass (void); +void f_list (void); /* ENTRY, EXTERNAL label list */ +void f_define (void); /* ABSOLUTE, RELATIVE label list */ +void f_move (void); +void f_jump (void); +void f_call (void); +void f_return (void); +void f_int (void); +void f_select (void); +void f_reselect (void); +void f_wait (void); +void f_disconnect (void); +void f_set (void); +void f_clear (void); +void f_load (void); +void f_store (void); +void f_nop (void); +void f_arch (void); + +struct { + char *name; + void (*func)(void); +} directives[] = { + {"PROC", f_proc}, + {"PASS", f_pass}, + {"ENTRY", f_list}, + {"ABSOLUTE", f_define}, + {"EXTERN", f_list}, + {"EXTERNAL", f_list}, + {"RELATIVE", f_define}, + {"MOVE", f_move}, + {"JUMP", f_jump}, + {"CALL", f_call}, + {"RETURN", f_return}, + {"INT", f_int}, + {"SELECT", f_select}, + {"RESELECT", f_reselect}, + {"WAIT", f_wait}, + {"DISCONNECT", f_disconnect}, + {"SET", f_set}, + {"CLEAR", f_clear}, + {"LOAD", f_load}, + {"STORE", f_store}, + {"NOP", f_nop}, + {"ARCH", f_arch}, + {NULL, NULL}}; + +u_int32_t script[MAXINST]; +int dsps; +char *script_name = "SCRIPT"; +u_int32_t inst0, inst1, inst2; +unsigned int ninsts; +unsigned int npatches; + +struct patchlist { + struct patchlist *next; + unsigned offset; +}; + +#define S_LABEL 0x0000 +#define S_ABSOLUTE 0x0001 +#define S_RELATIVE 0x0002 +#define S_EXTERNAL 0x0003 +#define F_DEFINED 0x0001 +#define F_ENTRY 0x0002 +struct { + short type; + short flags; + u_int32_t value; + struct patchlist *patchlist; + char *name; +} symbols[MAXSYMBOLS]; +int nsymbols; + +char *stypes[] = {"Label", "Absolute", "Relative", "External"}; + +char *phases[] = { + "data_out", "data_in", "cmd", "status", + "res4", "res5", "msg_out", "msg_in" +}; + +struct ncrregs { + char *name; + int addr[4]; +}; +#define ARCH710 1 +#define ARCH720 2 +#define ARCH810 3 +#define ARCH825 4 + +struct ncrregs regs[] = { + {"scntl0", {0x00, 0x00, 0x00, 0x00}}, + {"scntl1", {0x01, 0x01, 0x01, 0x01}}, + {"scntl2", {-1, 0x02, 0x02, 0x02}}, + {"scntl3", {-1, 0x03, 0x03, 0x03}}, + {"scid", {-1, 0x04, 0x04, 0x04}}, + {"sdid", {0x02, -1, -1, -1}}, + {"sien", {0x03, -1, -1, -1}}, + {"scid", {0x04, -1, -1, -1}}, + {"sxfer", {0x05, 0x05, 0x05, 0x05}}, + {"sdid", {-1, 0x06, 0x06, 0x06}}, + {"gpreg", {-1, 0x07, 0x07, 0x07}}, + {"sodl", {0x06, -1, -1, -1}}, + {"socl", {0x07, -1, -1, -1}}, + {"sfbr", {0x08, 0x08, 0x08, 0x08}}, + {"socl", {-1, 0x09, 0x09, 0x09}}, + {"ssid", {-1, 0x0a, 0x0a, 0x0a}}, + {"sidl", {0x09, -1, -1, -1}}, + {"sbdl", {0x0a, -1, -1, -1}}, + {"sbcl", {0x0b, 0x0b, 0x0b, 0x0b}}, + {"dstat", {0x0c, 0x0c, 0x0c, 0x0c}}, + {"sstat0", {0x0d, 0x0d, 0x0d, 0x0d}}, + {"sstat1", {0x0e, 0x0e, 0x0e, 0x0e}}, + {"sstat2", {0x0f, 0x0f, 0x0f, 0x0f}}, + {"dsa0", {0x10, 0x10, 0x10, 0x10}}, + {"dsa1", {0x11, 0x11, 0x11, 0x11}}, + {"dsa2", {0x12, 0x12, 0x12, 0x12}}, + {"dsa3", {0x13, 0x13, 0x13, 0x13}}, + {"istat", {-1, 0x14, 0x14, 0x14}}, + {"ctest0", {0x14, 0x18, 0x18, 0x18}}, + {"ctest1", {0x15, 0x19, 0x19, 0x19}}, + {"ctest2", {0x16, 0x1a, 0x1a, 0x1a}}, + {"ctest3", {0x17, 0x1b, 0x1b, 0x1b}}, + {"temp0", {-1, 0x1c, 0x1c, 0x1c}}, + {"temp1", {-1, 0x1d, 0x1d, 0x1d}}, + {"temp2", {-1, 0x1e, 0x1e, 0x1e}}, + {"temp3", {-1, 0x1f, 0x1f, 0x1f}}, + {"dfifo", {-1, 0x20, 0x20, 0x20}}, + {"ctest4", {0x18, 0x21, 0x21, 0x21}}, + {"ctest5", {0x19, 0x22, 0x22, 0x22}}, + {"ctest6", {0x20, 0x23, 0x23, 0x23}}, + {"ctest7", {0x21, -1, -1, -1}}, + {"temp0", {0x22, -1, -1, -1}}, + {"temp1", {0x23, -1, -1, -1}}, + {"temp2", {0x24, -1, -1, -1}}, + {"temp3", {0x25, -1, -1, -1}}, + {"dfifo", {0x26, -1, -1, -1}}, + {"istat", {0x27, -1, -1, -1}}, + {"ctest8", {0x28, -1, -1, -1}}, + {"lcrc", {0x29, -1, -1, -1}}, + {"dbc0", {0x2a, 0x24, 0x24, 0x24}}, + {"dbc1", {0x2b, 0x25, 0x25, 0x25}}, + {"dbc2", {0x2c, 0x26, 0x26, 0x26}}, + {"dcmd", {0x2d, 0x27, 0x27, 0x27}}, + {"dnad0", {0x2e, 0x28, 0x28, 0x28}}, + {"dnad1", {0x2f, 0x29, 0x29, 0x29}}, + {"dnad2", {0x30, 0x2a, 0x2a, 0x2a}}, + {"dnad3", {0x31, 0x2b, 0x2b, 0x2b}}, + {"dsp0", {0x32, 0x2c, 0x2c, 0x2c}}, + {"dsp1", {0x33, 0x2d, 0x2d, 0x2d}}, + {"dsp2", {0x34, 0x2e, 0x2e, 0x2e}}, + {"dsp3", {0x35, 0x2f, 0x2f, 0x2f}}, + {"dsps0", {0x36, 0x30, 0x30, 0x30}}, + {"dsps1", {0x37, 0x31, 0x31, 0x31}}, + {"dsps2", {0x38, 0x32, 0x32, 0x32}}, + {"dsps3", {0x39, 0x33, 0x33, 0x33}}, + {"scratch0", {0x40, -1, -1, -1}}, + {"scratch1", {0x41, -1, -1, -1}}, + {"scratch2", {0x42, -1, -1, -1}}, + {"scratch3", {0x43, -1, -1, -1}}, + {"scratcha0", { -1, 0x34, 0x34, 0x34}}, + {"scratcha1", { -1, 0x35, 0x35, 0x35}}, + {"scratcha2", { -1, 0x36, 0x36, 0x36}}, + {"scratcha3", { -1, 0x37, 0x37, 0x37}}, + {"dmode", {0x44, 0x38, 0x38, 0x38}}, + {"dien", {0x45, 0x39, 0x39, 0x39}}, + {"dwt", {0x46, 0x3a, -1, -1}}, + {"sbr", { -1, -1, 0x3a, 0x3a}}, + {"dcntl", {0x47, 0x3b, 0x3b, 0x3b}}, + {"addr0", {0x48, 0x3c, 0x3c, 0x3c}}, + {"addr1", {0x49, 0x3d, 0x3d, 0x3d}}, + {"addr2", {0x4A, 0x3e, 0x3e, 0x3e}}, + {"addr3", {0x4B, 0x3f, 0x3f, 0x3f}}, + {"sien0", { -1, 0x40, 0x40, 0x40}}, + {"sien1", { -1, 0x41, 0x41, 0x41}}, + {"sist0", { -1, 0x42, 0x42, 0x42}}, + {"sist1", { -1, 0x43, 0x43, 0x43}}, + {"slpar", { -1, 0x44, 0x44, 0x44}}, + {"swide", { -1, 0x45, -1, 0x45}}, + {"macntl", { -1, 0x46, 0x46, 0x46}}, + {"gpcntl", { -1, 0x47, 0x47, 0x47}}, + {"stime0", { -1, 0x48, 0x48, 0x48}}, + {"stime1", { -1, 0x49, 0x49, 0x49}}, + {"respid0", { -1, 0x4a, 0x4a, 0x4a}}, + {"respid1", { -1, 0x4b, -1, 0x4b}}, + {"stest0", { -1, 0x4c, 0x4c, 0x4c}}, + {"stest1", { -1, 0x4d, 0x4d, 0x4d}}, + {"stest2", { -1, 0x4e, 0x4e, 0x4e}}, + {"stest3", { -1, 0x4f, 0x4f, 0x4f}}, + {"sidl0", { -1, 0x50, 0x50, 0x50}}, + {"sidl1", { -1, 0x51, -1, 0x51}}, + {"sodl0", { -1, 0x54, 0x54, 0x54}}, + {"sodl1", { -1, 0x55, -1, 0x55}}, + {"sbdl0", { -1, 0x58, 0x58, 0x58}}, + {"sbdl1", { -1, 0x59, -1, 0x59}}, + {"scratchb0", { -1, 0x5c, 0x5c, 0x5c}}, + {"scratchb1", { -1, 0x5d, 0x5d, 0x5d}}, + {"scratchb2", { -1, 0x5e, 0x5e, 0x5e}}, + {"scratchb3", { -1, 0x5f, 0x5f, 0x5f}}, + {"scratchc0", { -1, -1, -1, 0x60}}, + {"scratchc1", { -1, -1, -1, 0x61}}, + {"scratchc2", { -1, -1, -1, 0x62}}, + {"scratchc3", { -1, -1, -1, 0x63}}, + {"scratchd0", { -1, -1, -1, 0x64}}, + {"scratchd1", { -1, -1, -1, 0x65}}, + {"scratchd2", { -1, -1, -1, 0x5e}}, + {"scratchd3", { -1, -1, -1, 0x67}}, + {"scratche0", { -1, -1, -1, 0x68}}, + {"scratche1", { -1, -1, -1, 0x69}}, + {"scratche2", { -1, -1, -1, 0x6a}}, + {"scratche3", { -1, -1, -1, 0x6b}}, + {"scratchf0", { -1, -1, -1, 0x6c}}, + {"scratchf1", { -1, -1, -1, 0x6d}}, + {"scratchf2", { -1, -1, -1, 0x6e}}, + {"scratchf3", { -1, -1, -1, 0x6f}}, + {"scratchg0", { -1, -1, -1, 0x70}}, + {"scratchg1", { -1, -1, -1, 0x71}}, + {"scratchg2", { -1, -1, -1, 0x72}}, + {"scratchg3", { -1, -1, -1, 0x73}}, + {"scratchh0", { -1, -1, -1, 0x74}}, + {"scratchh1", { -1, -1, -1, 0x75}}, + {"scratchh2", { -1, -1, -1, 0x7e}}, + {"scratchh3", { -1, -1, -1, 0x77}}, + {"scratchi0", { -1, -1, -1, 0x78}}, + {"scratchi1", { -1, -1, -1, 0x79}}, + {"scratchi2", { -1, -1, -1, 0x7a}}, + {"scratchi3", { -1, -1, -1, 0x7b}}, + {"scratchj0", { -1, -1, -1, 0x7c}}, + {"scratchj1", { -1, -1, -1, 0x7d}}, + {"scratchj2", { -1, -1, -1, 0x7e}}, + {"scratchj3", { -1, -1, -1, 0x7f}}, +}; + +int lineno; +int err_listed; +int arch; +int partial_flag; + +char inbuf[128]; + +char *sourcefile; +char *outputfile; +char *listfile; +char *errorfile; + +FILE *infp; +FILE *outfp; +FILE *listfp; +FILE *errfp; + +void setarch(char *); +void parse (void); +void process (void); +void emit_symbols (void); +void list_symbols (void); +void errout (char *); +void define_symbol (char *, u_int32_t, short, short); +void close_script (void); +void new_script (char *); +void store_inst (void); +int expression (int *); +int evaluate (int); +int number (char *); +int lookup (char *); +int reserved (char *, int); +int CheckPhase (int); +int CheckRegister (int); +void transfer (int, int); +void select_reselect (int); +void set_clear (u_int32_t); +void block_move (void); +void register_write (void); +void memory_to_memory (void); +void loadstore (int); +void error_line(void); +char *makefn(char *, char *); +void usage(void); + +int +main (int argc, char *argv[]) +{ + int i; + + if (argc < 2 || argv[1][0] == '-') + usage(); + sourcefile = argv[1]; + infp = fopen (sourcefile, "r"); + if (infp == NULL) { + perror ("open source"); + fprintf (stderr, "scc: error opening source file %s\n", argv[1]); + exit (1); + } + /* + * process options + * -l [listfile] + * -o [outputfile] + * -p [outputfile] + * -z [debugfile] + * -e [errorfile] + * -a arch + * -v + * -u + */ + for (i = 2; i < argc; ++i) { + if (argv[i][0] != '-') + usage(); + switch (argv[i][1]) { + case 'o': + case 'p': + partial_flag = argv[i][1] == 'p'; + if (i + 1 >= argc || argv[i + 1][0] == '-') + outputfile = makefn (sourcefile, "out"); + else { + outputfile = argv[i + 1]; + ++i; + } + break; + case 'l': + if (i + 1 >= argc || argv[i + 1][0] == '-') + listfile = makefn (sourcefile, "lis"); + else { + listfile = argv[i + 1]; + ++i; + } + break; + case 'e': + if (i + 1 >= argc || argv[i + 1][0] == '-') + errorfile = makefn (sourcefile, "err"); + else { + errorfile = argv[i + 1]; + ++i; + } + break; + case 'a': + if (i + 1 == argc) + usage(); + setarch(argv[i +1]); + if (arch == 0) { + fprintf(stderr,"%s: bad arch '%s'\n", + argv[0], argv[i +1]); + exit(1); + } + ++i; + break; + default: + fprintf (stderr, "scc: unrecognized option '%c'\n", + argv[i][1]); + usage(); + } + } + if (outputfile) + outfp = fopen (outputfile, "w"); + if (listfile) + listfp = fopen (listfile, "w"); + if (errorfile) + errfp = fopen (errorfile, "w"); + else + errfp = stderr; + + if (outfp) { + time_t cur_time; + + fprintf(outfp, "/*\t$NetBSD: ncr53cxxx.c,v 1.5 2000/10/23 14:51:51 bouyer Exp $\t*/\n"); + fprintf(outfp, "/*\n"); + fprintf(outfp, " *\tDO NOT EDIT - this file is automatically generated.\n"); + time(&cur_time); + fprintf(outfp, " *\tcreated from %s on %s", sourcefile, ctime(&cur_time)); + fprintf(outfp, " */\n"); + } + + while (fgets (inbuf, sizeof (inbuf), infp)) { + ++lineno; + if (listfp) + fprintf (listfp, "%3d: %s", lineno, inbuf); + err_listed = 0; + parse (); + if (ntokens) { +#ifdef DUMP_TOKENS + int i; + + fprintf (listfp, " %d tokens\n", ntokens); + for (i = 0; i < ntokens; ++i) { + fprintf (listfp, " %d: ", i); + if (tokens[i].type) + fprintf (listfp,"'%c'\n", tokens[i].type); + else + fprintf (listfp, "%s\n", tokens[i].name); + } +#endif + if (ntokens >= 2 && tokens[0].type == 0 && + tokens[1].type == ':') { + define_symbol (tokens[0].name, dsps, S_LABEL, F_DEFINED); + tokenix += 2; + } + if (tokenix < ntokens) + process (); + } + + } + close_script (); + emit_symbols (); + if (outfp && !partial_flag) { + fprintf (outfp, "\nu_int32_t INSTRUCTIONS = 0x%08x;\n", ninsts); + fprintf (outfp, "u_int32_t PATCHES = 0x%08x;\n", npatches); + } + list_symbols (); + exit(0); +} + +void setarch(char *val) +{ + switch (atoi(val)) { + case 710: + arch = ARCH710; + break; + case 720: + arch = ARCH720; + break; + case 810: + arch = ARCH810; + break; + case 825: + arch = ARCH825; + break; + default: + arch = 0; + } +} + +void emit_symbols () +{ + int i; + struct patchlist *p; + + if (nsymbols == 0 || outfp == NULL) + return; + + for (i = 0; i < nsymbols; ++i) { + char *code; + if ((symbols[i].flags & F_DEFINED) == 0 && + symbols[i].type != S_EXTERNAL) { + fprintf(stderr, "warning: symbol %s undefined\n", + symbols[i].name); + } + if (symbols[i].type == S_ABSOLUTE) + code = "A_"; + else if (symbols[i].type == S_RELATIVE) + code = "R_"; + else if (symbols[i].type == S_EXTERNAL) + code = "E_"; + else if (symbols[i].flags & F_ENTRY) + code = "Ent_"; + else + continue; + fprintf (outfp, "#define\t%s%s\t0x%08x\n", code, symbols[i].name, + symbols[i].value); + if (symbols[i].flags & F_ENTRY || symbols[i].patchlist == NULL) + continue; + fprintf (outfp, "u_int32_t %s%s_Used[] = {\n", code, symbols[i].name); +#if 1 + p = symbols[i].patchlist; + while (p) { + fprintf (outfp, "\t0x%08x,\n", p->offset / 4); + p = p->next; + } +#endif + fprintf (outfp, "};\n\n"); + } + /* patches ? */ +} + +void list_symbols () +{ + int i; + + if (nsymbols == 0 || listfp == NULL) + return; + fprintf (listfp, "\n\nValue Type Symbol\n"); + for (i = 0; i < nsymbols; ++i) { + fprintf (listfp, "%08x: %-8s %s\n", symbols[i].value, + stypes[symbols[i].type], symbols[i].name); + } +} + +void errout (char *text) +{ + error_line(); + fprintf (errfp, "*** %s ***\n", text); +} + +void parse () +{ + char *p = inbuf; + char c; + char string[64]; + char *s; + + ntokens = tokenix = 0; + while (1) { + while ((c = *p++) && c != '\n' && (c <= ' ' || c == '\t')) + ; + if (c == '\n' || c == 0 || c == ';') + break; + if (ntokens >= MAXTOKENS) { + errout ("Token table full"); + break; + } + if ((c >= '0' && c <= '9') || (c >= 'a' && c <= 'z') || + (c >= 'A' && c <= 'Z') || c == '$' || c == '_') { + s = string; + *s++ = c; + while (((c = *p) >= '0' && c <= '9') || + (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z') || + c == '_' || c == '$') { + *s++ = *p++; + } + *s = 0; + tokens[ntokens].name = malloc (strlen (string) + 1); + strcpy (tokens[ntokens].name, string); + tokens[ntokens].type = 0; + } + else { + tokens[ntokens].type = c; + } + ++ntokens; + } + return; +} + +void process () +{ + int i; + + if (tokens[tokenix].type) { + error_line(); + fprintf (errfp, "Error: expected directive, found '%c'\n", + tokens[tokenix].type); + return; + } + for (i = 0; directives[i].name; ++i) { + if (strcmpi (directives[i].name, tokens[tokenix].name) == 0) + break; + } + if (directives[i].name == NULL) { + error_line(); + fprintf (errfp, "Error: expected directive, found \"%s\"\n", + tokens[tokenix].name); + return; + } + if (directives[i].func == NULL) { + error_line(); + fprintf (errfp, "No function for directive \"%s\"\n", tokens[tokenix].name); + } else { +#if 0 + fprintf (listfp, "Processing directive \"%s\"\n", directives[i].name); +#endif + ++tokenix; + (*directives[i].func) (); + } +} + +void define_symbol (char *name, u_int32_t value, short type, short flags) +{ + int i; + struct patchlist *p; + + for (i = 0; i < nsymbols; ++i) { + if (symbols[i].type == type && strcmp (symbols[i].name, name) == 0) { + if (symbols[i].flags & F_DEFINED) { + error_line(); + fprintf (errfp, "*** Symbol \"%s\" multiply defined\n", + name); + } else { + symbols[i].flags |= flags; + symbols[i].value = value; + p = symbols[i].patchlist; + while (p) { + if (p->offset > dsps) + errout ("Whoops\007"); + else + script[p->offset / 4] = dsps - p->offset - 4; + p = p->next; + } + } + return; + } + } + if (nsymbols >= MAXSYMBOLS) { + errout ("Symbol table full"); + return; + } + symbols[nsymbols].type = type; + symbols[nsymbols].flags = flags; + symbols[nsymbols].value = value; + symbols[nsymbols].patchlist = NULL; + symbols[nsymbols].name = malloc (strlen (name) + 1); + strcpy (symbols[nsymbols].name, name); + ++nsymbols; +} + +void close_script () +{ + int i; + + if (dsps == 0) + return; + if (outfp) { + fprintf (outfp, "const u_int32_t %s[] = {\n", script_name); + for (i = 0; i < dsps / 4; i += 2) { + fprintf (outfp, "\t0x%08x, 0x%08x", script[i], + script[i + 1]); + /* check for memory move instruction */ + if ((script[i] & 0xe0000000) == 0xc0000000) + fprintf (outfp, ", 0x%08x,", script[i + 2]); + else + if ((i + 2) <= dsps / 4) fprintf (outfp, ",\t\t"); + fprintf (outfp, "\t/* %03x - %3d */\n", i * 4, i * 4); + if ((script[i] & 0xe0000000) == 0xc0000000) + ++i; + } + fprintf (outfp, "};\n\n"); + } + dsps = 0; +} + +void new_script (char *name) +{ + close_script (); + script_name = malloc (strlen (name) + 1); + strcpy (script_name, name); +} + +int reserved (char *string, int t) +{ + if (tokens[t].type == 0 && strcmpi (tokens[t].name, string) == 0) + return (1); + return (0); +} + +int CheckPhase (int t) +{ + int i; + + for (i = 0; i < 8; ++i) { + if (reserved (phases[i], t)) { + inst0 |= i << 24; + return (1); + } + } + return (0); +} + +int CheckRegister (int t) +{ + int i; + + if (arch <= 0) { + errout("'ARCH' statement missing"); + return -1; + } + for (i = 0; i < (sizeof(regs) / sizeof(regs[0])); i++) { + if (regs[i].addr[arch - 1] >= 0 && reserved(regs[i].name, t)) + return regs[i].addr[arch-1]; + } + return (-1); +} + +int expression (int *t) +{ + int value; + int i = *t; + + value = evaluate (i++); + while (i < ntokens) { + if (tokens[i].type == '+') + value += evaluate (i + 1); + else if (tokens[i].type == '-') + value -= evaluate (i + 1); + else + errout ("Unknown identifier"); + i += 2; + } + *t = i; + return (value); +} + +int evaluate (t) +{ + int value; + char *name; + + if (tokens[t].type) { + errout ("Expected an identifier"); + return (0); + } + name = tokens[t].name; + if (*name >= '0' && *name <= '9') + value = number (name); + else + value = lookup (name); + return (value); +} + +int number (char *s) +{ + int value; + int n; + int radix; + + radix = 10; + if (*s == '0') { + ++s; + radix = 8; + switch (*s) { + case 'x': + case 'X': + radix = 16; + break; + case 'b': + case 'B': + radix = 2; + } + if (radix != 8) + ++s; + } + value = 0; + while (*s) { + n = *s++; + if (n >= '0' && n <= '9') + n -= '0'; + else if (n >= 'a' && n <= 'f') + n -= 'a' - 10; + else if (n >= 'A' && n <= 'F') + n -= 'A' - 10; + else { + error_line(); + fprintf (errfp, "*** Expected digit\n"); + n = 0; + } + if (n >= radix) + errout ("Expected digit"); + else + value = value * radix + n; + } + return (value); +} + +int lookup (char *name) +{ + int i; + struct patchlist *p; + + for (i = 0; i < nsymbols; ++i) { + if (strcmp (name, symbols[i].name) == 0) { + if ((symbols[i].flags & F_DEFINED) == 0) { + p = (struct patchlist *) &symbols[i].patchlist; + while (p->next) + p = p->next; + p->next = (struct patchlist *) malloc (sizeof (struct patchlist)); + p = p->next; + p->next = NULL; + p->offset = dsps + 4; + } + return ((int) symbols[i].value); + } + } + if (nsymbols >= MAXSYMBOLS) { + errout ("Symbol table full"); + return (0); + } + symbols[nsymbols].type = S_LABEL; /* assume forward reference */ + symbols[nsymbols].flags = 0; + symbols[nsymbols].value = 0; + p = (struct patchlist *) malloc (sizeof (struct patchlist)); + symbols[nsymbols].patchlist = p; + p->next = NULL; + p->offset = dsps + 4; + symbols[nsymbols].name = malloc (strlen (name) + 1); + strcpy (symbols[nsymbols].name, name); + ++nsymbols; + return (0); +} + +void f_arch (void) +{ + int i, archsave; + + i = tokenix; + + archsave = arch; + setarch(tokens[i].name); + if( arch == 0) { + errout("Unrecognized ARCH"); + arch = archsave; + } +} + +void f_proc (void) +{ + if (tokens[tokenix].type != 0 || tokens[tokenix + 1].type != ':') + errout ("Invalid PROC statement"); + else + new_script (tokens[tokenix].name); +} + +void f_pass (void) +{ + errout ("PASS option not implemented"); +} + +/* + * f_list: process list of symbols for the ENTRY and EXTERNAL directive + */ + +void f_list (void) +{ + int i; + short type; + short flags; + + type = strcmpi (tokens[tokenix-1].name, "ENTRY") ? S_EXTERNAL : S_LABEL; + flags = type == S_LABEL ? F_ENTRY : 0; + for (i = tokenix; i < ntokens; ++i) { + if (tokens[i].type != 0) { + errout ("Expected an identifier"); + return; + } + define_symbol (tokens[i].name, 0, type, flags); + if (i + 1 < ntokens) { + if (tokens[++i].type == ',') + continue; + errout ("Expected a separator"); + return; + } + } +} + +/* + * f_define: process list of definitions for ABSOLUTE and RELATIVE directive + */ + +void f_define (void) +{ + int i; + char *name; + u_int32_t value; + int type; + + type = strcmpi (tokens[tokenix-1].name, "ABSOLUTE") ? S_RELATIVE : S_ABSOLUTE; + i = tokenix; + while (i < ntokens) { + if (tokens[i].type) { + errout ("Expected an identifier"); + return; + } + if (tokens[i + 1].type != '=') { + errout ("Expected a separator"); + return; + } + name = tokens[i].name; + i += 2; + value = expression (&i); + define_symbol (name, value, type, F_DEFINED); + } +} + +void store_inst () +{ + int i = dsps / 4; + int l = 8; + + if ((inst0 & 0xe0000000) == 0xc0000000) + l = 12; /* Memory to memory move is 12 bytes */ + if ((dsps + l) / 4 > MAXINST) { + errout ("Instruction table overflow"); + return; + } + script[i++] = inst0; + script[i++] = inst1; + if (l == 12) + script[i++] = inst2; + if (listfp) { + fprintf (listfp, "\t%04x: %08x %08x", dsps, inst0, inst1); + if (l == 12) + fprintf (listfp, " %08x", inst2); + fprintf (listfp, "\n"); + } + dsps += l; + inst0 = inst1 = inst2 = 0; + ++ninsts; +} + +void f_move (void) +{ + if (reserved ("memory", tokenix)) + memory_to_memory (); + else if (reserved ("from", tokenix) || tokens[tokenix+1].type == ',') + block_move (); + else + register_write (); + store_inst (); +} + +void f_jump (void) +{ + transfer (0x80000000, 0); +} + +void f_call (void) +{ + transfer (0x88000000, 0); +} + +void f_return (void) +{ + transfer (0x90000000, 1); +} + +void f_int (void) +{ + transfer (0x98000000, 2); +} + +void f_select (void) +{ + int t = tokenix; + + if (reserved ("atn", t)) { + inst0 = 0x01000000; + ++t; + } + select_reselect (t); +} + +void f_reselect (void) +{ + select_reselect (tokenix); +} + +void f_wait (void) +{ + int i = tokenix; + + inst1 = 0; + if (reserved ("disconnect", i)) { + inst0 = 0x48000000; + } + else { + if (reserved ("reselect", i)) + inst0 = 0x50000000; + else if (reserved ("select", i)) + inst0 = 0x50000000; + else + errout ("Expected SELECT or RESELECT"); + ++i; + if (reserved ("rel", i)) { + i += 2; + inst1 = evaluate (i) - dsps - 8; + inst0 |= 0x04000000; + } + else + inst1 = evaluate (i); + } + store_inst (); +} + +void f_disconnect (void) +{ + inst0 = 0x48000000; + store_inst (); +} + +void f_set (void) +{ + set_clear (0x58000000); +} + +void f_clear (void) +{ + set_clear (0x60000000); +} + +void f_load (void) +{ + inst0 = 0xe1000000; + if (arch < ARCH810) { + errout ("Wrong arch for load/store"); + return; + } + loadstore(tokenix); +} + +void f_store (void) +{ + int i; + inst0 = 0xe0000000; + if (arch < ARCH810) { + errout ("Wrong arch for load/store"); + return; + } + i = tokenix; + if (reserved("noflush", i)) { + inst0 |= 0x2000000; + i++; + } + loadstore(i); +} + +void f_nop (void) +{ + inst0 = 0x10000000; + inst1 = 0x00000000; + store_inst (); +} + +void loadstore(int i) +{ + int reg, size; + + reg = CheckRegister(i); + if (reg < 0) + errout ("Expected register"); + else + inst0 |= reg << 16; + if (reg == 8) + errout ("Register can't be SFBR"); + i++; + if (tokens[i].type == ',') + i++; + else + errout ("expected ','"); + size = evaluate(i); + if (i < 1 || i > 4) + errout("wrong size"); + if ((reg & 0x3) + size > 4) + errout("size too big for register"); + inst0 |= size; + i++; + if (tokens[i].type == ',') + i++; + else + errout ("expected ','"); + if (reserved("from", i) || reserved("dsarel", i)) { + i++; + inst0 |= 0x10000000; + } + inst1 = evaluate(i); + store_inst (); +} + +void transfer (int word0, int type) +{ + int i; + + i = tokenix; + inst0 = word0; + if (type == 0 && reserved ("rel", i)) { + inst1 = evaluate (i + 2) - dsps - 8; + i += 4; + inst0 |= 0x00800000; + } + else if (type != 1) { + inst1 = evaluate (i); + ++i; + } + if (i >= ntokens) { + inst0 |= 0x00080000; + store_inst (); + return; + } + if (tokens[i].type != ',') + errout ("Expected a separator, ',' assumed"); + else + ++i; + if (reserved("when", i)) + inst0 |= 0x00010000; + else if (reserved ("if", i) == 0) { + errout ("Expected a reserved word"); + store_inst (); + return; + } + i++; + if (reserved("false", i)) { + store_inst (); + return; + } + if (reserved ("not", i)) + ++i; + else + inst0 |= 0x00080000; + if (reserved ("atn", i)) { + inst0 |= 0x00020000; + ++i; + } else if (CheckPhase (i)) { + inst0 |= 0x00020000; + ++i; + } + if (i < ntokens && tokens[i].type != ',') { + if (inst0 & 0x00020000) { + if (inst0 & 0x00080000 && reserved ("and", i)) { + ++i; + } + else if ((inst0 & 0x00080000) == 0 && reserved ("or", i)) { + ++i; + } + else + errout ("Expected a reserved word"); + } + inst0 |= 0x00040000 + (evaluate (i++) & 0xff); + } + if (i < ntokens) { + if (tokens[i].type == ',') + ++i; + else + errout ("Expected a separator, ',' assumed"); + if (reserved ("and", i) && reserved ("mask", i + 1)) + inst0 |= ((evaluate (i + 2) & 0xff) << 8); + else + errout ("Expected , AND MASK"); + } + store_inst (); +} + +void select_reselect (int t) +{ + inst0 |= 0x40000000; /* ATN may be set from SELECT */ + if (reserved ("from", t)) { + ++t; + inst0 |= 0x02000000 | evaluate (t++); + } + else + inst0 |= (evaluate (t++) & 0xff) << 16; + if (tokens[t++].type == ',') { + if (reserved ("rel", t)) { + inst0 |= 0x04000000; + inst1 = evaluate (t + 2) - dsps - 8; + } + else + inst1 = evaluate (t); + } + else + errout ("Expected separator"); + store_inst (); +} + +void set_clear (u_int32_t code) +{ + int i = tokenix; + short need_and = 0; + + inst0 = code; + while (i < ntokens) { + if (need_and) { + if (reserved ("and", i)) + ++i; + else + errout ("Expected AND"); + } + if (reserved ("atn", i)) { + inst0 |= 0x0008; + ++i; + } + else if (reserved ("ack", i)) { + inst0 |= 0x0040; + ++i; + } + else if (reserved ("target", i)) { + inst0 |= 0x0200; + ++i; + } + else + errout ("Expected ATN, ACK, or TARGET"); + need_and = 1; + } + store_inst (); +} + +void block_move () +{ + if (reserved ("from", tokenix)) { + inst1 = evaluate (tokenix+1); + inst0 |= 0x10000000 | inst1; /*** ??? to match Zeus script */ + tokenix += 2; + } + else { + inst0 |= evaluate (tokenix++); /* count */ + tokenix++; /* skip ',' */ + if (reserved ("ptr", tokenix)) { + ++ tokenix; + inst0 |= 0x20000000; + } + inst1 = evaluate (tokenix++); /* address */ + } + if (tokens[tokenix].type != ',') + errout ("Expected separator"); + if (reserved ("when", tokenix + 1)) { + inst0 |= 0x08000000; + CheckPhase (tokenix + 2); + } + else if (reserved ("with", tokenix + 1)) { + CheckPhase (tokenix + 2); + } + else + errout ("Expected WITH or WHEN"); +} + +void register_write () +{ + /* + * MOVE reg/data8 TO reg register write + * MOVE reg <op> data8 TO reg register write + * MOVE reg + data8 TO reg WITH CARRY register write + */ + int op; + int reg; + int data; + + if (reserved ("to", tokenix+1)) + op = 0; + else if (tokens[tokenix+1].type == '|') + op = 2; + else if (tokens[tokenix+1].type == '&') + op = 4; + else if (tokens[tokenix+1].type == '+') + op = 6; + else if (tokens[tokenix+1].type == '-') + op = 8; + else + errout ("Unknown register operator"); + if (op && reserved ("to", tokenix+3) == 0) + errout ("Register command expected TO"); + reg = CheckRegister (tokenix); + if (reg < 0) { /* Not register, must be data */ + data = evaluate (tokenix); + if (op) + errout ("Register operator not move"); + reg = CheckRegister (tokenix+2); + if (reg < 0) + errout ("Expected register"); + inst0 = 0x78000000 | (data << 8) | reg << 16; +#if 0 +fprintf (listfp, "Move data to register: %02x %d\n", data, reg); +#endif + } + else if (op) { /* A register read/write operator */ + data = evaluate (tokenix+2); + if (tokenix+5 < ntokens) { + if (!reserved("with", tokenix+5) || + !reserved("carry", tokenix+6)) { + errout("Expected 'WITH CARRY'"); + } else if (op != 6) { + errout("'WITH CARRY' only valide with '+'"); + } + op = 7; + } + if (op == 8) { + data = -data; + op = 6; + } + inst0 = (data & 0xff) << 8; + data = CheckRegister (tokenix+4); + if (data < 0) + errout ("Expected register"); + if (reg != data && reg != 8 && data != 8) + errout ("One register MUST be SBFR"); + if (reg == data) { /* A register read/modify/write */ +#if 0 +fprintf (listfp, "Read/modify register: %02x %d %d\n", inst0 >> 8, op, reg); +#endif + inst0 |= 0x78000000 | (op << 24) | (reg << 16); + } + else { /* A move to/from SFBR */ + if (reg == 8) { /* MOVE SFBR <> TO reg */ +#if 0 +fprintf (listfp, "Move SFBR to register: %02x %d %d\n", inst0 >> 8, op, data); +#endif + inst0 |= 0x68000000 | (op << 24) | (data << 16); + } + else { +#if 0 +fprintf (listfp, "Move register to SFBR: %02x %d %d\n", inst0 >> 8, op, reg); +#endif + inst0 |= 0x70000000 | (op << 24) | (reg << 16); + } + } + } + else { /* register to register */ + data = CheckRegister (tokenix+2); + if (reg == 8) /* move SFBR to reg */ + inst0 = 0x6a000000 | (data << 16); + else if (data == 8) /* move reg to SFBR */ + inst0 = 0x72000000 | (reg << 16); + else + errout ("One register must be SFBR"); + } +} + +void memory_to_memory () +{ + inst0 = 0xc0000000 + evaluate (tokenix+1); + inst1 = evaluate (tokenix+3); + /* + * need to hack dsps, otherwise patch offset will be wrong for + * second pointer + */ + dsps += 4; + inst2 = evaluate (tokenix+5); + dsps -= 4; +} + +void error_line() +{ + if (errfp != listfp && errfp && err_listed == 0) { + fprintf (errfp, "%3d: %s", lineno, inbuf); + err_listed = 1; + } +} + +char * makefn (base, sub) + char *base; + char *sub; +{ + char *fn; + + fn = malloc (strlen (base) + strlen (sub) + 2); + strcpy (fn, base); + base = strrchr(fn, '.'); + if (base) + *base = 0; + strcat (fn, "."); + strcat (fn, sub); + return (fn); +} + +void usage() +{ + fprintf (stderr, "usage: scc sourcfile [options]\n"); + exit(1); +} diff --git a/sys/dev/microcode/siop/siop.out b/sys/dev/microcode/siop/siop.out new file mode 100644 index 00000000000..04f97fd382d --- /dev/null +++ b/sys/dev/microcode/siop/siop.out @@ -0,0 +1,407 @@ +/* $OpenBSD: siop.out,v 1.1 2001/02/15 04:07:59 krw Exp $ */ +/* $NetBSD: siop.out,v 1.11 2000/10/23 14:54:50 bouyer Exp $ */ +/* + * DO NOT EDIT - this file is automatically generated. + * created from siop.ss on Mon Oct 23 16:54:27 2000 + */ +const u_int32_t siop_script[] = { + 0x78340000, 0x00000000, /* 000 - 0 */ + 0x78350000, 0x00000000, /* 008 - 8 */ + 0x72370000, 0x00000000, /* 010 - 16 */ + 0x80840020, 0x00000300, /* 018 - 24 */ + 0x868b0000, 0x00000368, /* 020 - 32 */ + 0x878b0000, 0x000002e0, /* 028 - 40 */ + 0x808b0000, 0x000003f0, /* 030 - 48 */ + 0x818b0000, 0x00000388, /* 038 - 56 */ + 0x828b0000, 0x00000360, /* 040 - 64 */ + 0x838b0000, 0x00000368, /* 048 - 72 */ + 0x98080000, 0x0000ffff, /* 050 - 80 */ + 0x741a4000, 0x00000000, /* 058 - 88 */ + 0x980c0000, 0x0000ff83, /* 060 - 96 */ + 0x7810ff00, 0x00000000, /* 068 - 104 */ + 0x7811ff00, 0x00000000, /* 070 - 112 */ + 0x7812ff00, 0x00000000, /* 078 - 120 */ + 0x7813ff00, 0x00000000, /* 080 - 128 */ + 0x78340000, 0x00000000, /* 088 - 136 */ + 0x78350000, 0x00000000, /* 090 - 144 */ + 0x80000000, 0x00000000, /* 098 - 152 */ + 0x80000000, 0x00000000, /* 0a0 - 160 */ + 0x80000000, 0x00000000, /* 0a8 - 168 */ + 0x80000000, 0x00000000, /* 0b0 - 176 */ + 0x80000000, 0x00000000, /* 0b8 - 184 */ + 0x80000000, 0x00000000, /* 0c0 - 192 */ + 0x80000000, 0x00000000, /* 0c8 - 200 */ + 0x80000000, 0x00000000, /* 0d0 - 208 */ + 0x80000000, 0x00000000, /* 0d8 - 216 */ + 0x80000000, 0x00000000, /* 0e0 - 224 */ + 0x80000000, 0x00000000, /* 0e8 - 232 */ + 0x80000000, 0x00000000, /* 0f0 - 240 */ + 0x80000000, 0x00000000, /* 0f8 - 248 */ + 0x80000000, 0x00000000, /* 100 - 256 */ + 0x80000000, 0x00000000, /* 108 - 264 */ + 0x80000000, 0x00000000, /* 110 - 272 */ + 0x80000000, 0x00000000, /* 118 - 280 */ + 0x80000000, 0x00000000, /* 120 - 288 */ + 0x80000000, 0x00000000, /* 128 - 296 */ + 0x80000000, 0x00000000, /* 130 - 304 */ + 0x80000000, 0x00000000, /* 138 - 312 */ + 0x80000000, 0x00000000, /* 140 - 320 */ + 0x80000000, 0x00000000, /* 148 - 328 */ + 0x80000000, 0x00000000, /* 150 - 336 */ + 0x80000000, 0x00000000, /* 158 - 344 */ + 0x80000000, 0x00000000, /* 160 - 352 */ + 0x80000000, 0x00000000, /* 168 - 360 */ + 0x80000000, 0x00000000, /* 170 - 368 */ + 0x80000000, 0x00000000, /* 178 - 376 */ + 0x80000000, 0x00000000, /* 180 - 384 */ + 0x80000000, 0x00000000, /* 188 - 392 */ + 0x80000000, 0x00000000, /* 190 - 400 */ + 0x80000000, 0x00000000, /* 198 - 408 */ + 0x80000000, 0x00000000, /* 1a0 - 416 */ + 0x80000000, 0x00000000, /* 1a8 - 424 */ + 0x80000000, 0x00000000, /* 1b0 - 432 */ + 0x80000000, 0x00000000, /* 1b8 - 440 */ + 0x80000000, 0x00000000, /* 1c0 - 448 */ + 0x80000000, 0x00000000, /* 1c8 - 456 */ + 0x80000000, 0x00000000, /* 1d0 - 464 */ + 0x7810ff00, 0x00000000, /* 1d8 - 472 */ + 0x7811ff00, 0x00000000, /* 1e0 - 480 */ + 0x7812ff00, 0x00000000, /* 1e8 - 488 */ + 0x7813ff00, 0x00000000, /* 1f0 - 496 */ + 0x78360000, 0x00000000, /* 1f8 - 504 */ + 0x78372000, 0x00000000, /* 200 - 512 */ + 0x54000000, 0xfffffe48, /* 208 - 520 */ + 0x740a8f00, 0x00000000, /* 210 - 528 */ + 0x6a340000, 0x00000000, /* 218 - 536 */ + 0x800c00ff, 0x00000000, /* 220 - 544 */ + 0x800c00ff, 0x00000000, /* 228 - 552 */ + 0x800c00ff, 0x00000000, /* 230 - 560 */ + 0x800c00ff, 0x00000000, /* 238 - 568 */ + 0x800c00ff, 0x00000000, /* 240 - 576 */ + 0x800c00ff, 0x00000000, /* 248 - 584 */ + 0x800c00ff, 0x00000000, /* 250 - 592 */ + 0x800c00ff, 0x00000000, /* 258 - 600 */ + 0x800c00ff, 0x00000000, /* 260 - 608 */ + 0x800c00ff, 0x00000000, /* 268 - 616 */ + 0x800c00ff, 0x00000000, /* 270 - 624 */ + 0x800c00ff, 0x00000000, /* 278 - 632 */ + 0x800c00ff, 0x00000000, /* 280 - 640 */ + 0x800c00ff, 0x00000000, /* 288 - 648 */ + 0x800c00ff, 0x00000000, /* 290 - 656 */ + 0x98080000, 0x0000ff80, /* 298 - 664 */ + 0x0f000001, 0x00000000, /* 2a0 - 672 */ + 0x6c350700, 0x00000000, /* 2a8 - 680 */ + 0x60000040, 0x00000000, /* 2b0 - 688 */ + 0x97030000, 0x00000000, /* 2b8 - 696 */ + 0x0f000001, 0x00000000, /* 2c0 - 704 */ + 0x60000040, 0x00000000, /* 2c8 - 712 */ + 0x6a370000, 0x00000000, /* 2d0 - 720 */ + 0x90040020, 0x00000000, /* 2d8 - 728 */ + 0x0f000001, 0x00000000, /* 2e0 - 736 */ + 0x60000040, 0x00000000, /* 2e8 - 744 */ + 0x6a360000, 0x00000000, /* 2f0 - 752 */ + 0x90080000, 0x00000000, /* 2f8 - 760 */ + 0x60000040, 0x00000000, /* 300 - 768 */ + 0x7a340100, 0x00000000, /* 308 - 776 */ + 0x60000008, 0x00000000, /* 310 - 784 */ + 0x1f000020, 0x00000020, /* 318 - 792 */ + 0x808c0000, 0x00000218, /* 320 - 800 */ + 0x808c0002, 0xffffffd0, /* 328 - 808 */ + 0x808c0001, 0x00000218, /* 330 - 816 */ + 0x98040004, 0x0000ff01, /* 338 - 824 */ + 0x88880000, 0x000001d0, /* 340 - 832 */ + 0x74340100, 0x00000000, /* 348 - 840 */ + 0x808c0000, 0xfffffd10, /* 350 - 848 */ + 0x72350000, 0x00000000, /* 358 - 856 */ + 0x808c0000, 0xfffffd00, /* 360 - 864 */ + 0x98080000, 0x0000ff04, /* 368 - 872 */ + 0x60000040, 0x00000000, /* 370 - 880 */ + 0x80880000, 0xfffffca0, /* 378 - 888 */ + 0x58000008, 0x00000000, /* 380 - 896 */ + 0x60000040, 0x00000000, /* 388 - 904 */ + 0x1e000038, 0x00000038, /* 390 - 912 */ + 0x60000008, 0x00000000, /* 398 - 920 */ + 0x80880000, 0xfffffc78, /* 3a0 - 928 */ + 0x1a000040, 0x00000040, /* 3a8 - 936 */ + 0x80880000, 0xfffffc68, /* 3b0 - 944 */ + 0x1b000048, 0x00000048, /* 3b8 - 952 */ + 0x80880000, 0xfffffc58, /* 3c0 - 960 */ + 0x88880000, 0x000000b8, /* 3c8 - 968 */ + 0x7a340200, 0x00000000, /* 3d0 - 976 */ + 0x19000050, 0x00000050, /* 3d8 - 984 */ + 0x7e350100, 0x00000000, /* 3e0 - 992 */ + 0x7e100800, 0x00000000, /* 3e8 - 1000 */ + 0x7f110000, 0x00000000, /* 3f0 - 1008 */ + 0x7f120000, 0x00000000, /* 3f8 - 1016 */ + 0x7f130000, 0x00000000, /* 400 - 1024 */ + 0x818b0000, 0xffffffc8, /* 408 - 1032 */ + 0x88880000, 0x000000b8, /* 410 - 1040 */ + 0x7c34fd00, 0x00000000, /* 418 - 1048 */ + 0x80880000, 0xfffffbf8, /* 420 - 1056 */ + 0x88880000, 0x00000058, /* 428 - 1064 */ + 0x7a340200, 0x00000000, /* 430 - 1072 */ + 0x18000050, 0x00000050, /* 438 - 1080 */ + 0x7e350100, 0x00000000, /* 440 - 1088 */ + 0x7e100800, 0x00000000, /* 448 - 1096 */ + 0x7f110000, 0x00000000, /* 450 - 1104 */ + 0x7f120000, 0x00000000, /* 458 - 1112 */ + 0x7f130000, 0x00000000, /* 460 - 1120 */ + 0x808b0000, 0xffffffc8, /* 468 - 1128 */ + 0x88880000, 0x00000058, /* 470 - 1136 */ + 0x7c34fd00, 0x00000000, /* 478 - 1144 */ + 0x80880000, 0xfffffb98, /* 480 - 1152 */ + 0x72100000, 0x00000000, /* 488 - 1160 */ + 0x6a5c0000, 0x00000000, /* 490 - 1168 */ + 0x72110000, 0x00000000, /* 498 - 1176 */ + 0x6a5d0000, 0x00000000, /* 4a0 - 1184 */ + 0x72120000, 0x00000000, /* 4a8 - 1192 */ + 0x6a5e0000, 0x00000000, /* 4b0 - 1200 */ + 0x72130000, 0x00000000, /* 4b8 - 1208 */ + 0x6a5f0000, 0x00000000, /* 4c0 - 1216 */ + 0x90080000, 0x00000000, /* 4c8 - 1224 */ + 0x725c0000, 0x00000000, /* 4d0 - 1232 */ + 0x6a100000, 0x00000000, /* 4d8 - 1240 */ + 0x725d0000, 0x00000000, /* 4e0 - 1248 */ + 0x6a110000, 0x00000000, /* 4e8 - 1256 */ + 0x725e0000, 0x00000000, /* 4f0 - 1264 */ + 0x6a120000, 0x00000000, /* 4f8 - 1272 */ + 0x725f0000, 0x00000000, /* 500 - 1280 */ + 0x6a130000, 0x00000000, /* 508 - 1288 */ + 0x90080000, 0x00000000, /* 510 - 1296 */ + 0x7c027f00, 0x00000000, /* 518 - 1304 */ + 0x60000008, 0x00000000, /* 520 - 1312 */ + 0x60000040, 0x00000000, /* 528 - 1320 */ + 0x48000000, 0x00000000, /* 530 - 1328 */ + 0x90080000, 0x00000000, /* 538 - 1336 */ + 0x88880000, 0xffffffd0, /* 540 - 1344 */ + 0x98080000, 0x0000ff00, /* 548 - 1352 */ + 0x60000040, 0x00000000, /* 550 - 1360 */ + 0x1f000028, 0x00000028, /* 558 - 1368 */ + 0x98080000, 0x0000ff02, /* 560 - 1376 */ + 0x60000040, 0x00000000, /* 568 - 1384 */ + 0x1f000030, 0x00000030, /* 570 - 1392 */ + 0x98080000, 0x0000ff03, /* 578 - 1400 */ + 0x10000000, 0x00000000, /* 580 - 1408 */ +}; + +const u_int32_t lun_switch[] = { + 0x7803ff00, 0x00000000, /* 000 - 0 */ + 0x7805ff00, 0x00000000, /* 008 - 8 */ + 0x80080000, 0x00000000, /* 010 - 16 */ + 0x88880000, 0xffffffe0, /* 018 - 24 */ + 0x72350000, 0x00000000, /* 020 - 32 */ + 0x98080000, 0x0000ff81, /* 028 - 40 */ +}; + +const u_int32_t tag_switch[] = { + 0x72360000, 0x00000000, /* 000 - 0 */ + 0x800c0000, 0x00000000, /* 008 - 8 */ + 0x800c0001, 0x00000000, /* 010 - 16 */ + 0x800c0002, 0x00000000, /* 018 - 24 */ + 0x800c0003, 0x00000000, /* 020 - 32 */ + 0x800c0004, 0x00000000, /* 028 - 40 */ + 0x800c0005, 0x00000000, /* 030 - 48 */ + 0x800c0006, 0x00000000, /* 038 - 56 */ + 0x800c0007, 0x00000000, /* 040 - 64 */ + 0x800c0008, 0x00000000, /* 048 - 72 */ + 0x800c0009, 0x00000000, /* 050 - 80 */ + 0x800c000a, 0x00000000, /* 058 - 88 */ + 0x800c000b, 0x00000000, /* 060 - 96 */ + 0x800c000c, 0x00000000, /* 068 - 104 */ + 0x800c000d, 0x00000000, /* 070 - 112 */ + 0x800c000e, 0x00000000, /* 078 - 120 */ + 0x800c000f, 0x00000000, /* 080 - 128 */ + 0x98080000, 0x0000ff82, /* 088 - 136 */ +}; + +const u_int32_t load_dsa[] = { + 0x7810f000, 0x00000000, /* 000 - 0 */ + 0x7811f100, 0x00000000, /* 008 - 8 */ + 0x7812f200, 0x00000000, /* 010 - 16 */ + 0x7813f300, 0x00000000, /* 018 - 24 */ + 0x90080000, 0x00000000, /* 020 - 32 */ + 0x88880000, 0xffffffd0, /* 028 - 40 */ + 0x80080000, 0x00000000, /* 030 - 48 */ + 0x88880000, 0xffffffc0, /* 038 - 56 */ + 0x43000018, 0x00000000, /* 040 - 64 */ + 0xc0000004, 0x00000000, 0x00000000, /* 048 - 72 */ + 0x80080000, 0x00000000, /* 054 - 84 */ + 0x10000000, 0x00000000, /* 05c - 92 */ +}; + +#define A_t_id 0x00000018 +#define A_t_msg_in 0x00000020 +#define A_t_ext_msg_in 0x00000028 +#define A_t_ext_msg_data 0x00000030 +#define A_t_msg_out 0x00000038 +#define A_t_cmd 0x00000040 +#define A_t_status 0x00000048 +#define A_t_data 0x00000050 +#define A_int_done 0x0000ff00 +#define A_int_msgin 0x0000ff01 +#define A_int_extmsgin 0x0000ff02 +#define A_int_extmsgdata 0x0000ff03 +#define A_int_disc 0x0000ff04 +#define A_int_reseltarg 0x0000ff80 +#define A_int_resellun 0x0000ff81 +#define A_int_reseltag 0x0000ff82 +#define A_int_resfail 0x0000ff83 +#define A_int_err 0x0000ffff +#define A_flag_sdp 0x00000001 +#define A_flag_data 0x00000002 +#define A_flag_data_mask 0x000000fd +#define Ent_waitphase 0x00000020 +#define Ent_send_msgout 0x00000380 +#define Ent_msgout 0x00000390 +#define Ent_msgin 0x00000310 +#define Ent_handle_msgin 0x00000320 +#define Ent_msgin_ack 0x00000370 +#define Ent_dataout 0x00000428 +#define Ent_datain 0x000003c8 +#define Ent_cmdout 0x000003a8 +#define Ent_status 0x000003b8 +#define Ent_disconnect 0x00000518 +#define Ent_reselect 0x000001d8 +#define Ent_reselected 0x00000000 +#define Ent_selected 0x00000370 +#define Ent_script_sched 0x00000068 +#define Ent_script_sched_slot0 0x00000098 +#define Ent_get_extmsgdata 0x00000568 +#define Ent_resel_targ0 0x00000220 +#define Ent_msgin_space 0x00000580 +#define Ent_lunsw_return 0x000002a0 +#define E_abs_script_sched_slot0 0x00000000 +u_int32_t E_abs_script_sched_slot0_Used[] = { + 0x00000027, + 0x00000029, + 0x0000002b, + 0x0000002d, + 0x0000002f, + 0x00000031, + 0x00000033, + 0x00000035, + 0x00000037, + 0x00000039, + 0x0000003b, + 0x0000003d, + 0x0000003f, + 0x00000041, + 0x00000043, + 0x00000045, + 0x00000047, + 0x00000049, + 0x0000004b, + 0x0000004d, + 0x0000004f, + 0x00000051, + 0x00000053, + 0x00000055, + 0x00000057, + 0x00000059, + 0x0000005b, + 0x0000005d, + 0x0000005f, + 0x00000061, + 0x00000063, + 0x00000065, + 0x00000067, + 0x00000069, + 0x0000006b, + 0x0000006d, + 0x0000006f, + 0x00000071, + 0x00000073, + 0x00000075, +}; + +#define E_abs_targ0 0x00000000 +u_int32_t E_abs_targ0_Used[] = { + 0x00000089, + 0x0000008b, + 0x0000008d, + 0x0000008f, + 0x00000091, + 0x00000093, + 0x00000095, + 0x00000097, + 0x00000099, + 0x0000009b, + 0x0000009d, + 0x0000009f, + 0x000000a1, + 0x000000a3, + 0x000000a5, +}; + +#define E_abs_msgin 0x00000000 +u_int32_t E_abs_msgin_Used[] = { + 0x000000a9, + 0x000000b1, + 0x000000b9, +}; + +#define Ent_lun_switch_entry 0x00000018 +#define Ent_resel_lun0 0x00000028 +#define Ent_restore_scntl3 0x00000000 +#define E_abs_lunsw_return 0x00000000 +u_int32_t E_abs_lunsw_return_Used[] = { + 0x00000005, +}; + +#define Ent_tag_switch_entry 0x00000000 +#define Ent_resel_tag0 0x00000008 +#define E_abs_tag0 0x00000000 +u_int32_t E_abs_tag0_Used[] = { + 0x00000003, + 0x00000005, + 0x00000007, + 0x00000009, + 0x0000000b, + 0x0000000d, + 0x0000000f, + 0x00000011, + 0x00000013, + 0x00000015, + 0x00000017, + 0x00000019, + 0x0000001b, + 0x0000001d, + 0x0000001f, + 0x00000021, +}; + +#define Ent_rdsa0 0x00000000 +#define Ent_rdsa1 0x00000008 +#define Ent_rdsa2 0x00000010 +#define Ent_rdsa3 0x00000018 +#define Ent_ldsa_reload_dsa 0x00000028 +#define Ent_ldsa_select 0x00000038 +#define Ent_ldsa_data 0x0000005c +#define E_ldsa_abs_reselected 0x00000000 +u_int32_t E_ldsa_abs_reselected_Used[] = { + 0x0000000d, +}; + +#define E_ldsa_abs_reselect 0x00000000 +u_int32_t E_ldsa_abs_reselect_Used[] = { + 0x00000011, +}; + +#define E_ldsa_abs_selected 0x00000000 +u_int32_t E_ldsa_abs_selected_Used[] = { + 0x00000016, +}; + +#define E_ldsa_abs_data 0x00000000 +u_int32_t E_ldsa_abs_data_Used[] = { + 0x00000013, +}; + +#define E_ldsa_abs_slot 0x00000000 +u_int32_t E_ldsa_abs_slot_Used[] = { + 0x00000014, +}; + + +u_int32_t INSTRUCTIONS = 0x000000d5; +u_int32_t PATCHES = 0x00000000; diff --git a/sys/dev/microcode/siop/siop.ss b/sys/dev/microcode/siop/siop.ss new file mode 100644 index 00000000000..d272e73f7fa --- /dev/null +++ b/sys/dev/microcode/siop/siop.ss @@ -0,0 +1,409 @@ +; $OpenBSD: siop.ss,v 1.1 2001/02/15 04:07:59 krw Exp $ +; $NetBSD: siop.ss,v 1.12 2000/10/23 14:53:53 bouyer Exp $ + +; +; Copyright (c) 2000 Manuel Bouyer. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions +; are met: +; 1. Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; 3. All advertising materials mentioning features or use of this software +; must display the following acknowledgement: +; This product includes software developed by Manuel Bouyer +; 4. The name of the author may not be used to endorse or promote products +; derived from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +; IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +; IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +; NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +; THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +ARCH 720 + +; offsets in sym_xfer +ABSOLUTE t_id = 24; +ABSOLUTE t_msg_in = 32; +ABSOLUTE t_ext_msg_in = 40; +ABSOLUTE t_ext_msg_data = 48; +ABSOLUTE t_msg_out = 56; +ABSOLUTE t_cmd = 64; +ABSOLUTE t_status = 72; +ABSOLUTE t_data = 80; + +;; interrupt codes +; interrupts that need a valid DSA +ABSOLUTE int_done = 0xff00; +ABSOLUTE int_msgin = 0xff01; +ABSOLUTE int_extmsgin = 0xff02; +ABSOLUTE int_extmsgdata = 0xff03; +ABSOLUTE int_disc = 0xff04; +; interrupts that don't have a valid DSA +ABSOLUTE int_reseltarg = 0xff80; +ABSOLUTE int_resellun = 0xff81; +ABSOLUTE int_reseltag = 0xff82; +ABSOLUTE int_resfail = 0xff83; +ABSOLUTE int_err = 0xffff; + +; flags for scratcha0 +ABSOLUTE flag_sdp = 0x01 ; got save data pointer +ABSOLUTE flag_data = 0x02 ; we're in data phase +ABSOLUTE flag_data_mask = 0xfd ; ~flag_data + +; main script symbols + +ENTRY waitphase; +ENTRY send_msgout; +ENTRY msgout; +ENTRY msgin; +ENTRY handle_msgin; +ENTRY msgin_ack; +ENTRY dataout; +ENTRY datain; +ENTRY cmdout; +ENTRY status; +ENTRY disconnect; +ENTRY reselect; +ENTRY reselected; +ENTRY selected; +ENTRY script_sched; +ENTRY script_sched_slot0; +ENTRY get_extmsgdata; +ENTRY resel_targ0; +ENTRY msgin_space; +ENTRY lunsw_return; +EXTERN abs_script_sched_slot0; +EXTERN abs_targ0; +EXTERN abs_msgin; + +; lun switch symbols +ENTRY lun_switch_entry; +ENTRY resel_lun0; +ENTRY restore_scntl3; +EXTERN abs_lunsw_return; + +; tag switch symbols +ENTRY tag_switch_entry; +ENTRY resel_tag0; +EXTERN abs_tag0; + +; command reselect script symbols +ENTRY rdsa0; +ENTRY rdsa1; +ENTRY rdsa2; +ENTRY rdsa3; +ENTRY ldsa_reload_dsa; +ENTRY ldsa_select; +ENTRY ldsa_data; + +EXTERN ldsa_abs_reselected; +EXTERN ldsa_abs_reselect; +EXTERN ldsa_abs_selected; +EXTERN ldsa_abs_data; +EXTERN ldsa_abs_slot; + +; main script + +PROC siop_script: + +reselected: +; starting a new session, init 'local variables' + MOVE 0 to SCRATCHA0 ; flags + MOVE 0 to SCRATCHA1 ; DSA offset (for S/G save data pointer) + MOVE SCRATCHA3 to SFBR ; pending message ? + JUMP REL(handle_msgin), IF not 0x20; +waitphase: + JUMP REL(msgout), WHEN MSG_OUT; + JUMP REL(msgin), WHEN MSG_IN; + JUMP REL(dataout), WHEN DATA_OUT; + JUMP REL(datain), WHEN DATA_IN; + JUMP REL(cmdout), WHEN CMD; + JUMP REL(status), WHEN STATUS; + INT int_err; + +reselect_fail: + ; check that host asserted SIGP, this'll clear SIGP in ISTAT + MOVE CTEST2 & 0x40 TO SFBR; + INT int_resfail, IF 0x00; +script_sched: + ; Clear DSA and init status + MOVE 0xff to DSA0; + MOVE 0xff to DSA1; + MOVE 0xff to DSA2; + MOVE 0xff to DSA3; + MOVE 0 to SCRATCHA0 ; flags + MOVE 0 to SCRATCHA1 ; DSA offset (for S/G save data pointer) +; the script scheduler: siop_start() we set the absolute jump addr, and then +; changes the FALSE to TRUE. The select script will change it back to false +; once the target is selected. +; The RAM could hold 370 slot entry, we limit it to 40. Should be more than +; enouth. +script_sched_slot0: + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; + JUMP abs_script_sched_slot0, IF FALSE; +; Nothing to do, wait for reselect +reselect: + ; Clear DSA and init status + MOVE 0xff to DSA0; + MOVE 0xff to DSA1; + MOVE 0xff to DSA2; + MOVE 0xff to DSA3; + MOVE 0x00 to SCRATCHA2; no tag + MOVE 0x20 to SCRATCHA3; simple tag msg, ignored by reselected: + WAIT RESELECT REL(reselect_fail) + MOVE SSID & 0x8f to SFBR + MOVE SFBR to SCRATCHA0 ; save reselect ID +; find the rigth param for this target +resel_targ0: + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + JUMP abs_targ0, IF 0xff; + INT int_reseltarg; +lunsw_return: + MOVE 1, abs_msgin, WHEN MSG_IN; + MOVE SFBR & 0x07 to SCRATCHA1; save LUN + CLEAR ACK; + RETURN, WHEN NOT MSG_IN; If no more message, jump to lun sw + MOVE 1, abs_msgin, WHEN MSG_IN; + CLEAR ACK; + MOVE SFBR to SCRATCHA3; save message + RETURN, IF NOT 0x20; jump to lun sw if not simple tag msg + MOVE 1, abs_msgin, WHEN MSG_IN; get tag + CLEAR ACK; + MOVE SFBR to SCRATCHA2; save tag + RETURN; jump to lun sw + +handle_sdp: + CLEAR ACK; + MOVE SCRATCHA0 | flag_sdp TO SCRATCHA0; + ; should get a disconnect message now +msgin: + CLEAR ATN + MOVE FROM t_msg_in, WHEN MSG_IN; +handle_msgin: + JUMP REL(handle_cmpl), IF 0x00 ; command complete message + JUMP REL(handle_sdp), IF 0x02 ; save data pointer message + JUMP REL(handle_extin), IF 0x01 ; extended message + INT int_msgin, IF not 0x04; + CALL REL(disconnect) ; disconnect message; +; if we didn't get sdp, or if offset is 0, no need to interrupt + MOVE SCRATCHA0 & flag_sdp TO SFBR; + JUMP REL(script_sched), if 0x00; + MOVE SCRATCHA1 TO SFBR; + JUMP REL(script_sched), if 0x00; +; Ok, we need to save data pointers + INT int_disc; +msgin_ack: +selected: + CLEAR ACK; + JUMP REL(waitphase); + +; entry point for msgout after a msgin or status phase +send_msgout: + SET ATN; + CLEAR ACK; +msgout: + MOVE FROM t_msg_out, WHEN MSG_OUT; + CLEAR ATN; + JUMP REL(waitphase); +cmdout: + MOVE FROM t_cmd, WHEN CMD; + JUMP REL(waitphase); +status: + MOVE FROM t_status, WHEN STATUS; + JUMP REL(waitphase); +datain: + CALL REL(savedsa); + MOVE SCRATCHA0 | flag_data TO SCRATCHA0; +datain_loop: + MOVE FROM t_data, WHEN DATA_IN; + MOVE SCRATCHA1 + 1 TO SCRATCHA1 ; adjust offset + MOVE DSA0 + 8 to DSA0; + MOVE DSA1 + 0 to DSA1 WITH CARRY; + MOVE DSA2 + 0 to DSA2 WITH CARRY; + MOVE DSA3 + 0 to DSA3 WITH CARRY; + JUMP REL(datain_loop), WHEN DATA_IN; + CALL REL(restoredsa); + MOVE SCRATCHA0 & flag_data_mask TO SCRATCHA0; + JUMP REL(waitphase); + +dataout: + CALL REL(savedsa); + MOVE SCRATCHA0 | flag_data TO SCRATCHA0; +dataout_loop: + MOVE FROM t_data, WHEN DATA_OUT; + MOVE SCRATCHA1 + 1 TO SCRATCHA1 ; adjust offset + MOVE DSA0 + 8 to DSA0; + MOVE DSA1 + 0 to DSA1 WITH CARRY; + MOVE DSA2 + 0 to DSA2 WITH CARRY; + MOVE DSA3 + 0 to DSA3 WITH CARRY; + JUMP REL(dataout_loop), WHEN DATA_OUT; + CALL REL(restoredsa); + MOVE SCRATCHA0 & flag_data_mask TO SCRATCHA0; + JUMP REL(waitphase); + +savedsa: + MOVE DSA0 to SFBR; + MOVE SFBR to SCRATCHB0; + MOVE DSA1 to SFBR; + MOVE SFBR to SCRATCHB1; + MOVE DSA2 to SFBR; + MOVE SFBR to SCRATCHB2; + MOVE DSA3 to SFBR; + MOVE SFBR to SCRATCHB3; + RETURN; + +restoredsa: + MOVE SCRATCHB0 TO SFBR; + MOVE SFBR TO DSA0; + MOVE SCRATCHB1 TO SFBR; + MOVE SFBR TO DSA1; + MOVE SCRATCHB2 TO SFBR; + MOVE SFBR TO DSA2; + MOVE SCRATCHB3 TO SFBR; + MOVE SFBR TO DSA3; + RETURN; + +disconnect: + MOVE SCNTL2 & 0x7f TO SCNTL2; + CLEAR ATN; + CLEAR ACK; + WAIT DISCONNECT; + RETURN; + +handle_cmpl: + CALL REL(disconnect); + INT int_done; + +handle_extin: + CLEAR ACK; + MOVE FROM t_ext_msg_in, WHEN MSG_IN; + INT int_extmsgin; /* let host fill in t_ext_msg_data */ +get_extmsgdata: + CLEAR ACK; + MOVE FROM t_ext_msg_data, WHEN MSG_IN; + INT int_extmsgdata; +msgin_space: + NOP; space to store msgin when reselect + + +;; per-target switch script for LUNs +; hack: we first do a call to the target-specific code, so that a return +; in the main switch will jump to the lun switch. +PROC lun_switch: +restore_scntl3: + MOVE 0xff TO SCNTL3; + MOVE 0xff TO SXFER; + JUMP abs_lunsw_return; +lun_switch_entry: + CALL REL(restore_scntl3); + MOVE SCRATCHA1 TO SFBR; +resel_lun0: + INT int_resellun; + +;; Per-device switch script for tag +PROC tag_switch: +tag_switch_entry: + MOVE SCRATCHA2 TO SFBR; restore tag +resel_tag0: + JUMP abs_tag0, IF 0x00; + JUMP abs_tag0, IF 0x01; + JUMP abs_tag0, IF 0x02; + JUMP abs_tag0, IF 0x03; + JUMP abs_tag0, IF 0x04; + JUMP abs_tag0, IF 0x05; + JUMP abs_tag0, IF 0x06; + JUMP abs_tag0, IF 0x07; + JUMP abs_tag0, IF 0x08; + JUMP abs_tag0, IF 0x09; + JUMP abs_tag0, IF 0x0a; + JUMP abs_tag0, IF 0x0b; + JUMP abs_tag0, IF 0x0c; + JUMP abs_tag0, IF 0x0d; + JUMP abs_tag0, IF 0x0e; + JUMP abs_tag0, IF 0x0f; + INT int_reseltag; + +;; per-command script: select, and called after a reselect to load DSA + +PROC load_dsa: +; Can't use MOVE MEMORY to load DSA, doesn't work I/O mapped +rdsa0: + MOVE 0xf0 to DSA0; +rdsa1: + MOVE 0xf1 to DSA1; +rdsa2: + MOVE 0xf2 to DSA2; +rdsa3: + MOVE 0xf3 to DSA3; + RETURN; +ldsa_reload_dsa: + CALL REL(rdsa0); + JUMP ldsa_abs_reselected; +ldsa_select: + CALL REL(rdsa0); + SELECT ATN FROM t_id, ldsa_abs_reselect; + MOVE MEMORY 4, ldsa_abs_data, ldsa_abs_slot; + JUMP ldsa_abs_selected; +ldsa_data: + NOP; contains data used by the MOVE MEMORY diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci index b57dac99aaf..38f424b1182 100644 --- a/sys/dev/pci/files.pci +++ b/sys/dev/pci/files.pci @@ -1,4 +1,4 @@ -# $OpenBSD: files.pci,v 1.93 2001/02/14 05:10:17 fgsch Exp $ +# $OpenBSD: files.pci,v 1.94 2001/02/15 04:07:57 krw Exp $ # $NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $ # # Config file and device description for machine-independent PCI code. @@ -161,6 +161,15 @@ device ncr: scsi attach ncr at pci file dev/pci/ncr.c ncr +# common code for siop/esiop pci front end +define siop_pci_common +file dev/pci/siop_pci_common.c siop_pci_common + +# Symbios 53c8xx SCSI chips +# device declaration in sys/conf/files +attach siop at pci with siop_pci: siop_pci_common +file dev/pci/siop_pci.c siop_pci + # NeoMagic 256AV and 256ZX device neo: audio, auconv, mulaw, ac97 attach neo at pci diff --git a/sys/dev/pci/siop_pci.c b/sys/dev/pci/siop_pci.c new file mode 100644 index 00000000000..c57749cb05a --- /dev/null +++ b/sys/dev/pci/siop_pci.c @@ -0,0 +1,84 @@ +/* $OpenBSD: siop_pci.c,v 1.1 2001/02/15 04:07:58 krw Exp $ */ +/* $NetBSD: siop_pci.c,v 1.8 2000/05/15 07:53:17 bouyer Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* SYM53c8xx PCI-SCSI I/O Processors driver: PCI front-end */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/device.h> +#include <sys/kernel.h> + +#include <dev/pci/pcireg.h> +#include <dev/pci/pcivar.h> + +#include <scsi/scsi_all.h> +#include <scsi/scsiconf.h> + +#include <dev/ic/siopvar.h> +#include <dev/pci/siop_pci_common.h> + +int siop_pci_match __P((struct device *, void *, void *)); +void siop_pci_attach __P((struct device *, struct device *, void *)); + +struct cfattach siop_pci_ca = { + sizeof(struct siop_pci_softc), siop_pci_match, siop_pci_attach +}; + +int +siop_pci_match(parent, match, aux) + struct device *parent; + void *match; + void *aux; +{ + struct pci_attach_args *pa = aux; + const struct siop_product_desc *pp; + + /* look if it's a known product */ + pp = siop_lookup_product(pa->pa_id, PCI_REVISION(pa->pa_class)); + if (pp) + return 1; + return 0; +} + +void +siop_pci_attach(parent, self, aux) + struct device *parent, *self; + void *aux; +{ + struct pci_attach_args *pa = aux; + struct siop_pci_softc *sc = (struct siop_pci_softc *)self; + + if (siop_pci_attach_common(sc, pa) == 0) + return; + + siop_attach(&sc->siop); +} diff --git a/sys/dev/pci/siop_pci_common.c b/sys/dev/pci/siop_pci_common.c new file mode 100644 index 00000000000..11b85509fe9 --- /dev/null +++ b/sys/dev/pci/siop_pci_common.c @@ -0,0 +1,347 @@ +/* $OpenBSD: siop_pci_common.c,v 1.1 2001/02/15 04:07:58 krw Exp $ */ +/* $NetBSD: siop_pci_common.c,v 1.6 2001/01/10 15:50:20 thorpej Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* SYM53c8xx PCI-SCSI I/O Processors driver: PCI front-end */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/device.h> +#include <sys/malloc.h> +#include <sys/buf.h> +#include <sys/kernel.h> + +#include <machine/endian.h> + +#include <dev/pci/pcireg.h> +#include <dev/pci/pcivar.h> +#include <dev/pci/pcidevs.h> + +#include <scsi/scsi_all.h> +#include <scsi/scsiconf.h> + +#include <dev/ic/siopreg.h> +#include <dev/ic/siopvar.h> +#include <dev/pci/siop_pci_common.h> + +/* List (array, really :) of chips we know how to handle */ +const struct siop_product_desc siop_products[] = { + { PCI_PRODUCT_SYMBIOS_810, + 0x00, + "Symbios Logic 53c810 (fast scsi)", + SF_PCI_RL | SF_CHIP_LS, + 4, 8, 3, 250, 0 + }, + { PCI_PRODUCT_SYMBIOS_810, + 0x10, + "Symbios Logic 53c810a (fast scsi)", + SF_PCI_RL | SF_PCI_BOF | SF_CHIP_PF | SF_CHIP_LS, + 4, 8, 3, 250, 0 + }, + { PCI_PRODUCT_SYMBIOS_815, + 0x00, + "Symbios Logic 53c815 (fast scsi)", + SF_PCI_RL | SF_PCI_BOF, + 4, 8, 3, 250, 0 + }, + { PCI_PRODUCT_SYMBIOS_820, + 0x00, + "Symbios Logic 53c820 (fast wide scsi)", + SF_PCI_RL | SF_CHIP_LS | SF_BUS_WIDE, + 4, 8, 3, 250, 0 + }, + { PCI_PRODUCT_SYMBIOS_825, + 0x00, + "Symbios Logic 53c825 (fast wide scsi)", + SF_PCI_RL | SF_PCI_BOF | SF_BUS_WIDE, + 4, 8, 3, 250, 0 + }, + { PCI_PRODUCT_SYMBIOS_825, + 0x10, + "Symbios Logic 53c825a (fast wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_WIDE, + 7, 8, 3, 250, 4096 + }, + { PCI_PRODUCT_SYMBIOS_860, + 0x00, + "Symbios Logic 53c860 (ultra scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_PF | SF_CHIP_LS | + SF_BUS_ULTRA, + 4, 8, 5, 125, 0 + }, + { PCI_PRODUCT_SYMBIOS_875, + 0x00, + "Symbios Logic 53c875 (ultra-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA | SF_BUS_WIDE, + 7, 16, 5, 125, 4096 + }, + { PCI_PRODUCT_SYMBIOS_875, + 0x02, + "Symbios Logic 53c875 (ultra-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_DBLR | + SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA | SF_BUS_WIDE, + 7, 16, 5, 125, 4096 + }, + { PCI_PRODUCT_SYMBIOS_875J, + 0x00, + "Symbios Logic 53c875j (ultra-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_DBLR | + SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA | SF_BUS_WIDE, + 7, 16, 5, 125, 4096 + }, + { PCI_PRODUCT_SYMBIOS_885, + 0x00, + "Symbios Logic 53c885 (ultra-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_DBLR | + SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA | SF_BUS_WIDE, + 7, 16, 5, 125, 4096 + }, + { PCI_PRODUCT_SYMBIOS_895, + 0x00, + "Symbios Logic 53c895 (ultra2-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_QUAD | + SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA2 | SF_BUS_WIDE, + 7, 31, 7, 62, 4096 + }, + { PCI_PRODUCT_SYMBIOS_896, + 0x00, + "Symbios Logic 53c896 (ultra2-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_QUAD | + SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA2 | SF_BUS_WIDE, + 7, 31, 7, 62, 8192 + }, + { PCI_PRODUCT_SYMBIOS_895A, + 0x00, + "Symbios Logic 53c895a (ultra2-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_QUAD | + SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA2 | SF_BUS_WIDE, + 7, 31, 7, 62, 8192 + }, + { PCI_PRODUCT_SYMBIOS_1510D, + 0x00, + "Symbios Logic 53c1510d (ultra2-wide scsi)", + SF_PCI_RL | SF_PCI_CLS | SF_PCI_WRI | SF_PCI_RM | + SF_CHIP_FIFO | SF_CHIP_PF | SF_CHIP_RAM | SF_CHIP_QUAD | + SF_CHIP_LS | SF_CHIP_10REGS | + SF_BUS_ULTRA2 | SF_BUS_WIDE, + 7, 31, 7, 62, 4096 + }, + { 0, + 0x00, + NULL, + 0x00, + 0, 0, 0, 0, 0 + }, +}; + +const struct siop_product_desc * +siop_lookup_product(id, rev) + u_int32_t id; + int rev; +{ + const struct siop_product_desc *pp; + const struct siop_product_desc *rp = NULL; + + if (PCI_VENDOR(id) != PCI_VENDOR_SYMBIOS) + return NULL; + + for (pp = siop_products; pp->name != NULL; pp++) { + if (PCI_PRODUCT(id) == pp->product && pp->revision <= rev) + if (rp == NULL || pp->revision > rp->revision) + rp = pp; + } + return rp; +} + +int +siop_pci_attach_common(sc, pa) + struct siop_pci_softc *sc; + struct pci_attach_args *pa; +{ + pci_chipset_tag_t pc = pa->pa_pc; + pcitag_t tag = pa->pa_tag; + const char *intrstr; + pci_intr_handle_t intrhandle; + bus_space_tag_t iot, memt; + bus_space_handle_t ioh, memh; + pcireg_t memtype; + int memh_valid, ioh_valid; + bus_addr_t ioaddr, memaddr; + + sc->sc_pp = siop_lookup_product(pa->pa_id, PCI_REVISION(pa->pa_class)); + if (sc->sc_pp == NULL) { + printf("sym: broken match/attach!!\n"); + return 0; + } + /* copy interesting infos about the chip */ + sc->siop.features = sc->sc_pp->features; + sc->siop.maxburst = sc->sc_pp->maxburst; + sc->siop.maxoff = sc->sc_pp->maxoff; + sc->siop.clock_div = sc->sc_pp->clock_div; + sc->siop.clock_period = sc->sc_pp->clock_period; + sc->siop.ram_size = sc->sc_pp->ram_size; + + sc->siop.sc_reset = siop_pci_reset; + printf(": %s\n", sc->sc_pp->name); + sc->sc_pc = pc; + sc->sc_tag = tag; + sc->siop.sc_dmat = pa->pa_dmat; + + memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, 0x14); + switch (memtype) { + case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT: + case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT: + memh_valid = (pci_mapreg_map(pa, 0x14, memtype, 0, + &memt, &memh, &memaddr, NULL) == 0); + break; + default: + memh_valid = 0; + } + + ioh_valid = (pci_mapreg_map(pa, 0x10, PCI_MAPREG_TYPE_IO, 0, + &iot, &ioh, &ioaddr, NULL) == 0); + + if (memh_valid) { + sc->siop.sc_rt = memt; + sc->siop.sc_rh = memh; + sc->siop.sc_raddr = memaddr; + } else if (ioh_valid) { + sc->siop.sc_rt = iot; + sc->siop.sc_rh = ioh; + sc->siop.sc_raddr = ioaddr; + } else { + printf("%s: unable to map device registers\n", + sc->siop.sc_dev.dv_xname); + return 0; + } + + if (sc->siop.features & SF_CHIP_RAM) { + int bar; + switch (memtype) { + case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT: + bar = 0x18; + break; + case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT: + bar = 0x1c; + break; + } + if (pci_mapreg_map(pa, bar, memtype, 0, + &sc->siop.sc_ramt, &sc->siop.sc_ramh, + &sc->siop.sc_scriptaddr, NULL) == 0) { + printf("%s: using on-board RAM\n", + sc->siop.sc_dev.dv_xname); + } else { + printf("%s: can't map on-board RAM\n", + sc->siop.sc_dev.dv_xname); + sc->siop.features &= ~SF_CHIP_RAM; + } + } + + if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin, + pa->pa_intrline, &intrhandle)) { + printf("%s: couldn't map interrupt\n", + sc->siop.sc_dev.dv_xname); + return 0; + } + intrstr = pci_intr_string(pa->pa_pc, intrhandle); + sc->sc_ih = pci_intr_establish(pa->pa_pc, intrhandle, IPL_BIO, + siop_intr, &sc->siop, sc->siop.sc_dev.dv_xname); + if (sc->sc_ih != NULL) { + printf("%s: interrupting at %s\n", + sc->siop.sc_dev.dv_xname, + intrstr ? intrstr : "unknown interrupt"); + } else { + printf("%s: couldn't establish interrupt", + sc->siop.sc_dev.dv_xname); + if (intrstr != NULL) + printf(" at %s", intrstr); + printf("\n"); + return 0; + } + return 1; +} + +void +siop_pci_reset(sc) + struct siop_softc *sc; +{ + int dmode; + + dmode = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DMODE); + if (sc->features & SF_PCI_RL) + dmode |= DMODE_ERL; + if (sc->features & SF_PCI_RM) + dmode |= DMODE_ERMP; + if (sc->features & SF_PCI_BOF) + dmode |= DMODE_BOF; + if (sc->features & SF_PCI_CLS) + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DCNTL, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DCNTL) | + DCNTL_CLSE); + if (sc->features & SF_PCI_WRI) + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) | + CTEST3_WRIE); + if (sc->maxburst) { + int ctest5 = bus_space_read_1(sc->sc_rt, sc->sc_rh, + SIOP_CTEST5); + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST4, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST4) & + ~CTEST4_BDIS); + dmode &= ~DMODE_BL_MASK; + dmode |= ((sc->maxburst - 1) << DMODE_BL_SHIFT) & DMODE_BL_MASK; + ctest5 &= ~CTEST5_BBCK; + ctest5 |= (sc->maxburst - 1) & CTEST5_BBCK; + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST5, ctest5); + } else { + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST4, + bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST4) | + CTEST4_BDIS); + } + bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DMODE, dmode); +} diff --git a/sys/dev/pci/siop_pci_common.h b/sys/dev/pci/siop_pci_common.h new file mode 100644 index 00000000000..cc53d21bf53 --- /dev/null +++ b/sys/dev/pci/siop_pci_common.h @@ -0,0 +1,61 @@ +/* $OpenBSD: siop_pci_common.h,v 1.1 2001/02/15 04:07:58 krw Exp $ */ +/* $NetBSD: siop_pci_common.h,v 1.2 2000/10/23 14:57:23 bouyer Exp $ */ + +/* + * Copyright (c) 2000 Manuel Bouyer. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Manuel Bouyer + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* common functions for the siop and esiop pci front ends */ + +/* structure describing each chip */ +struct siop_product_desc { + u_int32_t product; + int revision; + const char *name; + int features; /* features are defined in siopvar.h */ + u_int8_t maxburst; + u_int8_t maxoff; /* maximum supported offset */ + u_int8_t clock_div; /* clock divider to use for async. logic */ + u_int8_t clock_period; /* clock period (ns * 10) */ + int ram_size; /* size of RAM, if appropriate */ +}; + +const struct siop_product_desc * siop_lookup_product __P((u_int32_t, int)); + +/* Driver internal state */ +struct siop_pci_softc { + struct siop_softc siop; + pci_chipset_tag_t sc_pc; /* PCI registers info */ + pcitag_t sc_tag; + void *sc_ih; /* PCI interrupt handle */ + const struct siop_product_desc *sc_pp; /* Adapter description */ +}; + +int siop_pci_attach_common __P((struct siop_pci_softc *, + struct pci_attach_args *)); +void siop_pci_reset __P((struct siop_softc *)); |