diff options
Diffstat (limited to 'sys')
| -rw-r--r-- | sys/arch/sun3/conf/DISKLESS | 1 | ||||
| -rw-r--r-- | sys/arch/sun3/conf/FOUR_TTYS | 1 | ||||
| -rw-r--r-- | sys/arch/sun3/conf/GENERIC | 34 | ||||
| -rw-r--r-- | sys/arch/sun3/conf/GENERIC_KGDB | 112 | ||||
| -rw-r--r-- | sys/arch/sun3/conf/RAMDISK | 23 | ||||
| -rw-r--r-- | sys/arch/sun3/conf/SMD_TEST | 53 | ||||
| -rw-r--r-- | sys/arch/sun3/conf/std.sun3 | 1 |
7 files changed, 135 insertions, 90 deletions
diff --git a/sys/arch/sun3/conf/DISKLESS b/sys/arch/sun3/conf/DISKLESS index a2a7a9fe7f4..6141c0b4387 100644 --- a/sys/arch/sun3/conf/DISKLESS +++ b/sys/arch/sun3/conf/DISKLESS @@ -1,3 +1,4 @@ +# $OpenBSD: DISKLESS,v 1.13 2000/04/30 15:27:57 miod Exp $ # $NetBSD: DISKLESS,v 1.12.4.1 1996/08/19 23:35:03 gwr Exp $ # diff --git a/sys/arch/sun3/conf/FOUR_TTYS b/sys/arch/sun3/conf/FOUR_TTYS index fa3ee545ec7..2d8af9eca14 100644 --- a/sys/arch/sun3/conf/FOUR_TTYS +++ b/sys/arch/sun3/conf/FOUR_TTYS @@ -1,3 +1,4 @@ +# $OpenBSD: FOUR_TTYS,v 1.9 2000/04/30 15:27:57 miod Exp $ # $NetBSD: FOUR_TTYS,v 1.1.4.1 1996/08/19 23:35:05 gwr Exp $ # diff --git a/sys/arch/sun3/conf/GENERIC b/sys/arch/sun3/conf/GENERIC index a88af80bfcf..d0b80ce345f 100644 --- a/sys/arch/sun3/conf/GENERIC +++ b/sys/arch/sun3/conf/GENERIC @@ -1,3 +1,4 @@ +# $OpenBSD: GENERIC,v 1.19 2000/04/30 15:27:57 miod Exp $ # $NetBSD: GENERIC,v 1.27.4.1 1996/08/19 23:35:06 gwr Exp $ # @@ -10,18 +11,18 @@ include "arch/sun3/conf/std.sun3" # Machines to be supported by this kernel option GENERIC option FPU_EMULATE -option HAVECACHE # Sun3/260 VAC +option HAVECACHE # Sun3/260 VAC # Needs to be set per system. i.e change these as you see fit maxusers 4 # Standard system options -option KTRACE # system call tracing support +option KTRACE # system call tracing support # Debugging options. Uncomment either this: option DDB # ... or these two: (for KGDB on another machine) -#makeoptions DEBUG="-g" # symbols for kgdb + nm +#makeoptions DEBUG="-g" # symbols for kgdb + nm #option KGDB # Filesystem options @@ -99,9 +100,9 @@ le0 at obio0 addr 0x120000 level 3 # # E.g. "flags 0x07" would enable DMA, interrupts, and reselect. # Note: these values are quite a bit paranoid... -si0 at obio0 addr 0x140000 level 2 -si0 at vmes0 addr 0xff200000 level 2 vect 0x40 -si1 at vmes0 addr 0xff204000 level 2 vect 0x41 +si0 at obio0 addr 0x140000 level 2 flags 0x07 +si0 at vmes0 addr 0xff200000 level 2 vect 0x40 flags 0x07 +si1 at vmes0 addr 0xff204000 level 2 vect 0x41 flags 0x07 # Xylogics 7053 controllers # xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44 @@ -168,20 +169,17 @@ ch* at scsibus? target ? lun ? ss* at scsibus? target ? lun ? uk* at scsibus? target ? lun ? -# RAM-disk drivers -pseudo-device rd 2 +pseudo-device loop 1 # network loopback +pseudo-device bpfilter 8 # packet filter +pseudo-device sl 2 # CSLIP +pseudo-device ppp 2 # PPP +pseudo-device tun 2 # network tunneling over tty +pseudo-device enc 4 # encryption device -# Misc. -pseudo-device loop 1 # network loopback -pseudo-device bpfilter 8 # packet filter -pseudo-device sl 2 # CSLIP -pseudo-device ppp 2 # PPP -pseudo-device tun 2 # network tunneling over tty - -pseudo-device pty 64 # pseudo-terminals -#pseudo-device vnd 4 # paging to files +pseudo-device pty 64 # pseudo-terminals +pseudo-device vnd 4 # paging to files +pseudo-device ksyms 1 # kernel symbols device # for IPv6 pseudo-device gif 4 #pseudo-device faith 1 -pseudo-device ksyms 1 # kernel symbols device diff --git a/sys/arch/sun3/conf/GENERIC_KGDB b/sys/arch/sun3/conf/GENERIC_KGDB index 0a2b2b25329..e5b24276467 100644 --- a/sys/arch/sun3/conf/GENERIC_KGDB +++ b/sys/arch/sun3/conf/GENERIC_KGDB @@ -1,3 +1,4 @@ +# $OpenBSD: GENERIC_KGDB,v 1.6 2000/04/30 15:27:57 miod Exp $ # $NetBSD: GENERIC_KGDB,v 1.1.2.1 1996/08/19 23:35:07 gwr Exp $ # @@ -8,58 +9,59 @@ include "arch/sun3/conf/std.sun3" # Machines to be supported by this kernel -options GENERIC -options FPU_EMULATE -options HAVECACHE # Sun3/260 VAC +option GENERIC +option FPU_EMULATE +option HAVECACHE # Sun3/260 VAC # Needs to be set per system. i.e change these as you see fit maxusers 4 # Standard system options -options KTRACE # system call tracing support +option KTRACE # system call tracing support # Debugging options. Uncomment either this: -#options DDB +#option DDB # ... or these two: (for KGDB on another machine) -makeoptions DEBUG="-g" # symbols for kgdb + nm -options KGDB +makeoptions DEBUG="-g" # symbols for kgdb + nm +option KGDB # Filesystem options -options NFSSERVER # nfs server support -options NFSCLIENT # nfs client support -options FFS # ufs file system +option NFSSERVER # nfs server support +option NFSCLIENT # nfs client support +option FFS # ufs file system # -options CD9660 # ISO 9660 + Rock Ridge file system -options FDESC # /dev/fd/* -options FIFO # FIFOs; RECOMMENDED -options KERNFS # /kern -options NULLFS # loopback file system -options PROCFS # /proc -options UNION # union file system -options MFS # memory-based filesystem +option CD9660 # ISO 9660 + Rock Ridge file system +option FDESC # /dev/fd/* +option FIFO # FIFOs; RECOMMENDED +option KERNFS # /kern +option NULLFS # loopback file system +option PROCFS # /proc +option UNION # union file system +option MFS # memory-based filesystem # Networking options -options INET # IP prototol stack support -#options GATEWAY # IP packet forwarding -options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD +option INET # IP prototol stack support +option IPFILTER # IP packet filter for security +option IPFILTER_LOG # use /dev/ipl to log IPF +#option GATEWAY # IP packet forwarding +option TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD # XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) -options NFS_BOOT_RWSIZE=1024 +option NFS_BOOT_RWSIZE=1024 # Compatability options -options COMPAT_SUNOS # can run SunOS 4.1.1 executables -options COMPAT_43 # and 4.3BSD and ... -options COMPAT_10 # NetBSD 1.0 -options COMPAT_11 # NetBSD 1.1 -options COMPAT_12 # NetBSD 1.2 +option COMPAT_SUNOS # can run SunOS 4.1.1 executables +option COMPAT_43 # and 4.3BSD and ... +option COMPAT_10 # NetBSD 1.0 +option COMPAT_11 # NetBSD 1.1 +option COMPAT_12 # NetBSD 1.2 # Sun3-specific debugging options -options PMAP_DEBUG -#options VMFAULT_TRACE -#options SYSCALL_DEBUG -#options EXEC_DEBUG -options DIAGNOSTIC -#options SCSIDEBUG -options NCR5380_DEBUG +option PMAP_DEBUG +#option VMFAULT_TRACE +#option SYSCALL_DEBUG +#option EXEC_DEBUG +option DIAGNOSTIC +#option SCSIDEBUG config bsd swap generic @@ -77,18 +79,28 @@ ms0 at zsc0 channel 1 # mouse # # Intel Ethernet (onboard, or VME) -ie0 at obio0 addr ? level ? +ie0 at obio0 addr 0x0C0000 level 3 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 # Lance Ethernet (only onboard) -le0 at obio0 addr ? level ? +le0 at obio0 addr 0x120000 level 3 # # Disk and tape devices # # Sun3 "si" SCSI controller (NCR 5380) -si0 at obio0 addr ? level ? +# This driver has several flags which may be enabled by OR'ing +# the values and using the "flags" directive. (PR#1929) +# Valid flags are: +# +# 0x01 Use DMA (may be polled) +# 0x02 Use DMA completion interrupts +# 0x04 Allow disconnect/reselect +# +# E.g. "flags 0x07" would enable DMA, interrupts, and reselect. +# Note: these values are quite a bit paranoid... +si0 at obio0 addr 0x140000 level 2 si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si1 at vmes0 addr 0xff204000 level 2 vect 0x41 @@ -153,17 +165,21 @@ st* at scsibus? target ? lun ? cd0 at scsibus? target 6 lun 0 cd* at scsibus? target ? lun ? -#ch* at scsibus? target ? lun ? +ch* at scsibus? target ? lun ? +ss* at scsibus? target ? lun ? +uk* at scsibus? target ? lun ? -# RAM-disk drivers -pseudo-device rd 2 +pseudo-device loop 1 # network loopback +pseudo-device bpfilter 8 # packet filter +pseudo-device sl 2 # CSLIP +pseudo-device ppp 2 # PPP +pseudo-device tun 2 # network tunneling over tty +pseudo-device enc 4 # encryption device -# Misc. -pseudo-device loop 1 # network loopback -pseudo-device bpfilter 8 # packet filter -pseudo-device sl 2 # CSLIP -pseudo-device ppp 2 # PPP -pseudo-device tun 2 # network tunneling over tty +pseudo-device pty 64 # pseudo-terminals +pseudo-device vnd 4 # paging to files +pseudo-device ksyms 1 # kernel symbols device -pseudo-device pty 64 # pseudo-terminals -#pseudo-device vnd 4 # paging to files +# for IPv6 +pseudo-device gif 4 +#pseudo-device faith 1 diff --git a/sys/arch/sun3/conf/RAMDISK b/sys/arch/sun3/conf/RAMDISK index 6d6c458ae30..7f95c86a2a5 100644 --- a/sys/arch/sun3/conf/RAMDISK +++ b/sys/arch/sun3/conf/RAMDISK @@ -1,3 +1,4 @@ +# $OpenBSD: RAMDISK,v 1.13 2000/04/30 15:27:57 miod Exp $ # $NetBSD: RAMDISK,v 1.3.4.1 1996/08/19 23:35:10 gwr Exp $ # @@ -121,9 +122,19 @@ cd* at scsibus? target ? lun ? #ch* at scsibus? target ? lun ? # RAM-disk (root for install tape) -pseudo-device rd 2 # RAM-disk - -# Misc. -pseudo-device loop 1 # network loopback -pseudo-device sl 2 # CSLIP -pseudo-device ppp 2 # PPP +pseudo-device rd 2 # RAM-disk + +pseudo-device loop 1 # network loopback +pseudo-device bpfilter 8 # packet filter +pseudo-device sl 2 # CSLIP +pseudo-device ppp 2 # PPP +pseudo-device tun 2 # network tunneling over tty +pseudo-device enc 4 # encryption device + +pseudo-device pty 64 # pseudo-terminals +#pseudo-device vnd 4 # paging to files +pseudo-device ksyms 1 # kernel symbols device + +# for IPv6 +pseudo-device gif 4 +#pseudo-device faith 1 diff --git a/sys/arch/sun3/conf/SMD_TEST b/sys/arch/sun3/conf/SMD_TEST index 8e9cf30f0b9..0ff71fa4739 100644 --- a/sys/arch/sun3/conf/SMD_TEST +++ b/sys/arch/sun3/conf/SMD_TEST @@ -1,3 +1,4 @@ +# $OpenBSD: SMD_TEST,v 1.11 2000/04/30 15:27:57 miod Exp $ # $NetBSD: SMD_TEST,v 1.2.4.1 1996/08/19 23:35:11 gwr Exp $ # @@ -10,18 +11,18 @@ include "arch/sun3/conf/std.sun3" # Machines to be supported by this kernel option GENERIC option FPU_EMULATE -option HAVECACHE # Sun3/260 VAC +option HAVECACHE # Sun3/260 VAC # Needs to be set per system. i.e change these as you see fit maxusers 4 # Standard system options -option KTRACE # system call tracing support +option KTRACE # system call tracing support # Debugging options. Uncomment either this: option DDB # ... or these two: (for KGDB on another machine) -#makeoptions DEBUG="-g" # symbols for kgdb + nm +#makeoptions DEBUG="-g" # symbols for kgdb + nm #option KGDB # Filesystem options @@ -40,6 +41,8 @@ option MFS # memory-based filesystem # Networking options option INET # IP prototol stack support +option IPFILTER # IP packet filter for security +option IPFILTER_LOG # use /dev/ipl to log IPF #option GATEWAY # IP packet forwarding option TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD # XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...) @@ -53,7 +56,7 @@ option COMPAT_11 # NetBSD 1.1 option COMPAT_12 # NetBSD 1.2 # Sun3-specific debugging options -#option PMAP_DEBUG +option PMAP_DEBUG #option VMFAULT_TRACE #option SYSCALL_DEBUG #option EXEC_DEBUG @@ -76,18 +79,28 @@ ms0 at zsc0 channel 1 # mouse # # Intel Ethernet (onboard, or VME) -ie0 at obio0 addr ? level ? +ie0 at obio0 addr 0x0C0000 level 3 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 # Lance Ethernet (only onboard) -le0 at obio0 addr ? level ? +le0 at obio0 addr 0x120000 level 3 # # Disk and tape devices # # Sun3 "si" SCSI controller (NCR 5380) -si0 at obio0 addr ? level ? +# This driver has several flags which may be enabled by OR'ing +# the values and using the "flags" directive. (PR#1929) +# Valid flags are: +# +# 0x01 Use DMA (may be polled) +# 0x02 Use DMA completion interrupts +# 0x04 Allow disconnect/reselect +# +# E.g. "flags 0x07" would enable DMA, interrupts, and reselect. +# Note: these values are quite a bit paranoid... +si0 at obio0 addr 0x140000 level 2 si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si1 at vmes0 addr 0xff204000 level 2 vect 0x41 @@ -152,17 +165,21 @@ st* at scsibus? target ? lun ? cd0 at scsibus? target 6 lun 0 cd* at scsibus? target ? lun ? -#ch* at scsibus? target ? lun ? +ch* at scsibus? target ? lun ? +ss* at scsibus? target ? lun ? +uk* at scsibus? target ? lun ? -# RAM-disk drivers -pseudo-device rd 2 +pseudo-device loop 1 # network loopback +pseudo-device bpfilter 8 # packet filter +pseudo-device sl 2 # CSLIP +pseudo-device ppp 2 # PPP +pseudo-device tun 2 # network tunneling over tty +pseudo-device enc 4 # encryption device -# Misc. -pseudo-device loop 1 # network loopback -pseudo-device bpfilter 8 # packet filter -pseudo-device sl 2 # CSLIP -pseudo-device ppp 2 # PPP -pseudo-device tun 2 # network tunneling over tty +pseudo-device pty 64 # pseudo-terminals +#pseudo-device vnd 4 # paging to files +pseudo-device ksyms 1 # kernel symbols device -pseudo-device pty 64 # pseudo-terminals -#pseudo-device vnd 4 # paging to files +# for IPv6 +pseudo-device gif 4 +#pseudo-device faith 1 diff --git a/sys/arch/sun3/conf/std.sun3 b/sys/arch/sun3/conf/std.sun3 index fb097e4d520..adf068ab9e9 100644 --- a/sys/arch/sun3/conf/std.sun3 +++ b/sys/arch/sun3/conf/std.sun3 @@ -1,3 +1,4 @@ +# $OpenBSD: std.sun3,v 1.7 2000/04/30 15:27:57 miod Exp $ # $NetBSD: std.sun3,v 1.19 1996/11/19 21:04:50 gwr Exp $ # Standard information for sun3's. |