diff options
Diffstat (limited to 'usr.sbin/httpd/conf/httpd.conf-dist-win')
| -rw-r--r-- | usr.sbin/httpd/conf/httpd.conf-dist-win | 810 |
1 files changed, 677 insertions, 133 deletions
diff --git a/usr.sbin/httpd/conf/httpd.conf-dist-win b/usr.sbin/httpd/conf/httpd.conf-dist-win index 7cf79956aa6..1ad64192832 100644 --- a/usr.sbin/httpd/conf/httpd.conf-dist-win +++ b/usr.sbin/httpd/conf/httpd.conf-dist-win @@ -1,26 +1,179 @@ -# This is the main server configuration file. See URL http://www.apache.org/ -# for instructions. - +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See <URL:http://www.apache.org/docs/> for detailed information about +# the directives. +# # Do NOT simply read the instructions in here without understanding -# what they do, if you are unsure consult the online docs. You have been -# warned. +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# After this file is processed, the server will look for and process +# @@ServerRoot@@/conf/srm.conf and then @@ServerRoot@@/conf/access.conf +# unless you have overridden these with ResourceConfig and/or +# AccessConfig directives here. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "/usr/local/apache" will be interpreted by the +# server as "/usr/local/apache/logs/foo.log". +# +# NOTE: Where filenames are specified, you must use forward slashes +# instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). +# If a drive letter is omitted, the drive on which Apache.exe is located +# will be used by default. It is recommended that you always supply +# an explicit drive letter in absolute paths, however, to avoid +# confusion. +# -# Originally by Rob McCool +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# -# Note: Where filenames are specified, you must use forward slashes -# instead of backslashes. e.g. "c:/apache" instead of "c:\apache". If -# the drive letter is ommited, the drive where Apache.exe is located -# will be assumed +# +# ServerType is either inetd, or standalone. Inetd mode is only supported on +# Unix platforms. +# +ServerType standalone -# ServerType must be standalone. +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# Do NOT add a slash at the end of the directory path. +# +ServerRoot "@@ServerRoot@@" -ServerType standalone +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +PidFile logs/httpd.pid + +# +# ScoreBoardFile: File used to store internal server process information. +# Not all architectures require this. But if yours does (you'll know because +# this file will be created when you run Apache) then you *must* ensure that +# no two invocations of Apache share the same scoreboard file. +# +ScoreBoardFile logs/apache_status + +# +# In the standard configuration, the server will process httpd.conf, +# srm.conf, and access.conf in that order. The latter two files are +# now distributed empty, as it is recommended that all directives +# be kept in a single file for simplicity. The commented-out values +# below are the built-in defaults. You can have the server ignore +# these files altogether by using "/dev/null" (for Unix) or +# "nul" (for Win32) for the arguments to the directives. +# +#ResourceConfig conf/srm.conf +#AccessConfig conf/access.conf + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We reccomend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +# +# Apache on Win32 always creates one child process to handle requests. If it +# dies, another child process is created automatically. Within the child +# process multiple threads handle incoming requests. The next two +# directives control the behaviour of the threads and processes. +# + +# +# MaxRequestsPerChild: the number of requests each child process is +# allowed to process before the child dies. The child will exit so +# as to avoid problems after prolonged use when Apache (and maybe the +# libraries it uses) leak memory or other resources. On most systems, this +# isn't really needed, but a few (such as Solaris) do have notable leaks +# in the libraries. For Win32, set this value to zero (unlimited) +# unless advised otherwise. +# +MaxRequestsPerChild 0 + +# +# Number of concurrent threads (i.e., requests) the server will allow. +# Set this value according to the responsiveness of the server (more +# requests active at once means they're all handled more slowly) and +# the amount of system resources you'll allow the server to consume. +# +ThreadsPerChild 50 + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, in addition to the default. See also the <VirtualHost> +# directive. +# +#Listen 3000 +#Listen 12.34.56.78:80 + +# +# BindAddress: You can support virtual hosts with this option. This directive +# is used to tell the server which IP address to listen to. It can either +# contain "*", an IP address, or a fully qualified Internet domain name. +# See also the <VirtualHost> and Listen directives. +# +#BindAddress * # -# The following lists extra modules that can be uncommented to be loaded -# to enable extra functionality. See the manual -# (http://www.apache.org/docs/mod/) for details on the functionality -# of each module. +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Please read the file README.DSO in the Apache 1.3 distribution for more +# details about the DSO mechanism and run `apache -l' for the list of already +# built-in (statically linked and thus always available) modules in your Apache +# binary. +# +# Note: The order in which modules are loaded is important. Don't change +# the order below without expert advice. # #LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll #LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll @@ -33,176 +186,560 @@ ServerType standalone #LoadModule status_module modules/ApacheModuleStatus.dll #LoadModule usertrack_module modules/ApacheModuleUserTrack.dll +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# <VirtualHost> definition. These values also provide defaults for +# any <VirtualHost> containers you may define later in the file. +# +# All of these directives may appear inside <VirtualHost> containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# -# Port: The port the standalone listens to. +# +# If your ServerType directive (set earlier in the 'Global Environment' +# section) is set to "inetd", the next few directives don't have any +# effect since their settings are defined by the inetd configuration. +# Skip ahead to the ServerAdmin directive. +# +# +# Port: The port to which the standalone server listens. +# Port 80 -# HostnameLookups: Log the names of clients or just their IP numbers -# e.g. www.apache.org (on) or 204.62.129.132 (off) -# The default is off because it'd be overall better for the net if people -# had to knowingly turn this feature on. +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. +# +ServerAdmin you@your.address -HostnameLookups off +# +# ServerName allows you to set a host name which is sent back to clients for +# your server if it's different than the one the program would get (i.e., use +# "www" instead of the host's real name). +# +# Note: You cannot just invent host names and hope they work. The name you +# define here must be a valid DNS name for your host. If you don't understand +# this, ask your network administrator. +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address (e.g., http://123.45.67.89/) +# anyway, and this will make redirections work in a sensible way. +# +#ServerName new.host.name -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "@@ServerRoot@@/htdocs" -ServerAdmin you@your.address +# +# Each directory to which Apache has access, can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# permissions. +# +<Directory /> + Options FollowSymLinks + AllowOverride None +</Directory> -# ServerRoot: The directory the server's config, error, and log files -# are kept in +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# -ServerRoot "@@ServerRoot@@" +# +# This should be changed to whatever you set DocumentRoot to. +# +<Directory "@@ServerRoot@@/htdocs"> -# BindAddress: You can support virtual hosts with this option. This option -# is used to tell the server which IP address to listen to. It can either -# contain "*", an IP address, or a fully qualified Internet domain name. -# See also the VirtualHost directive. +# +# This may also be "None", "All", or any combination of "Indexes", +# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# + Options Indexes FollowSymLinks -#BindAddress * +# +# This controls which options the .htaccess files in directories can +# override. Can also be "All", or any combination of "Options", "FileInfo", +# "AuthConfig", and "Limit" +# + AllowOverride None + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all +</Directory> + +# +# UserDir: The name of the directory which is appended onto a user's home +# directory if a ~user request is received. +# +# Under Win32, we do not currently try to determine the home directory of +# a Windows login, so a format such as that below needs to be used. See +# the UserDir documentation for details. +# +UserDir "@@ServerRoot@@/users/" + +# +# DirectoryIndex: Name of the file or files to use as a pre-written HTML +# directory index. Separate multiple entries with spaces. +# +DirectoryIndex index.html + +# +# AccessFileName: The name of the file to look for in each directory +# for access control information. +# +AccessFileName .htaccess -# ErrorLog: The location of the error log file. If this does not start -# with /, ServerRoot is prepended to it. +# +# The following lines prevent .htaccess files from being viewed by +# Web clients. Since .htaccess files often contain authorization +# information, access is disallowed for security reasons. Comment +# these lines out if you want Web visitors to see the contents of +# .htaccess files. If you change the AccessFileName directive above, +# be sure to make the corresponding changes here. +# +<Files .htaccess> + Order allow,deny + Deny from all +</Files> + +# +# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each +# document that was negotiated on the basis of content. This asks proxy +# servers not to cache the document. Uncommenting the following line disables +# this behavior, and proxies will be allowed to cache the documents. +# +#CacheNegotiatedDocs + +# +# UseCanonicalName: (new for 1.3) With this setting turned on, whenever +# Apache needs to construct a self-referencing URL (a URL that refers back +# to the server the response is coming from) it will use ServerName and +# Port to form a "canonical" name. With this setting off, Apache will +# use the hostname:port that the client supplied, when possible. This +# also affects SERVER_NAME and SERVER_PORT in CGI scripts. +# +UseCanonicalName On +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +TypesConfig conf/mime.types + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# mod_mime_magic is not part of the default server (you have to add +# it yourself with a LoadModule [see the DSO paragraph in the 'Global +# Environment' section], or recompile the server and include mod_mime_magic +# as part of the configuration), so it's enclosed in an <IfModule> container. +# This means that the MIMEMagicFile directive will only be processed if the +# module is part of the server. +# +<IfModule mod_mime_magic.c> + MIMEMagicFile conf/magic +</IfModule> + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a <VirtualHost> +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a <VirtualHost> +# container, that host's errors will be logged there and not here. +# ErrorLog logs/error.log +# # LogLevel: Control the number of messages logged to the error.log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. - +# LogLevel warn +# # The following directives define some format nicknames for use with # a CustomLog directive (see below). - +# LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent -# The location of the access logfile (Common Logfile Format). -# If this does not start with /, ServerRoot is prepended to it. - +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a <VirtualHost> +# container, they will be logged here. Contrariwise, if you *do* +# define per-<VirtualHost> access logfiles, transactions will be +# logged therein and *not* in this file. +# CustomLog logs/access.log common -# If you would like to have an agent and referer logfile uncomment the +# +# If you would like to have agent and referer logfiles, uncomment the # following directives. - +# #CustomLog logs/referer.log referer #CustomLog logs/agent.log agent -# If you prefer a single logfile with access, agent and referer information +# +# If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. - +# #CustomLog logs/access.log combined -# PidFile: The file the server should log its pid to -PidFile logs/httpd.pid +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (error documents, FTP directory listings, +# mod_status and mod_info output etc., but not CGI generated documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On -# ScoreBoardFile: File used to store internal server process information. -# Not all architectures require this. But if yours does (you'll know because -# this file is created when you run Apache) then you *must* ensure that -# no two invocations of Apache share the same scoreboard file. -ScoreBoardFile logs/apache_status +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +# Note that if you include a trailing / on fakename then the server will +# require it to be present in the URL. So "/icons" isn't aliased in this +# example, only "/icons/".. +# +Alias /icons/ "@@ServerRoot@@/icons/" -# ExtendedStatus controls whether Apache will generate "full" status -# information (ExtendedStatus On) or just basic information (ExtendedStatus -# Off) when the server-status Handler is called. The default is Off. # -#ExtendedStatus On +# ScriptAlias: This controls which directories contain server scripts. +# ScriptAliases are essentially the same as Aliases, except that +# documents in the realname directory are treated as applications and +# run by the server when requested rather than as documents sent to the client. +# The same rules about trailing "/" apply to ScriptAlias directives as to +# Alias. +# +ScriptAlias /cgi-bin/ "@@ServerRoot@@/cgi-bin/" -# ServerName allows you to set a host name which is sent back to clients for -# your server if it's different than the one the program would get (i.e. use -# "www" instead of the host's real name). # -# Note: You cannot just invent host names and hope they work. The name you -# define here must be a valid DNS name for your host. If you don't understand -# this, ask your network administrator. -# If your host doesn't have a registered DNS name, enter its IP address here. -# You will have to access it by its address (e.g., http://123.45.67.89) -# anyway, and this will make redirections work in a sensible way. +# "@@ServerRoot@@/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# +<Directory "@@ServerRoot@@/cgi-bin"> + AllowOverride None + Options None +</Directory> -#ServerName new.host.name +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Format: Redirect old-URI new-URL +# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (error documents, ftp directory listings, -# mod_status and mod_info output etc., but not SSI generated documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -ServerSignature on +# +# Directives controlling the display of server-generated directory listings. +# -# UseCanonicalName: (new for 1.3) With this setting turned on, whenever -# Apache needs to construct a self-referencing URL (a url that refers back -# to the server the response is coming from) it will use ServerName and -# Port to form a "canonical" name. With this setting off, Apache will -# use the hostname:port that the client supplied, when possible. This -# also affects SERVER_NAME and SERVER_PORT in CGIs. -UseCanonicalName on +# +# FancyIndexing is whether you want fancy directory indexing or standard +# +IndexOptions FancyIndexing -# CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with each -# document that was negotiated on the basis of content. This asks proxy -# servers not to cache the document. Uncommenting the following line disables -# this behavior, and proxies will be allowed to cache the documents. +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ -#CacheNegotiatedDocs +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif -# Timeout: The number of seconds before receives and sends time out +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz -Timeout 300 +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +# +# The server will first look for name.html and include it if found. +# If name.html doesn't exist, the server will then look for name.txt +# and include it as plaintext if found. +# +ReadmeName README +HeaderName HEADER -# KeepAlive: Whether or not to allow persistent connections (more than -# one request per connection). Set to "Off" to deactivate. +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t -KeepAlive On +# +# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress +# information on the fly. Note: Not all browsers support this. +# Despite the name similarity, the following Add* directives have nothing +# to do with the FancyIndexing customisation directives above. +# +AddEncoding x-compress Z +AddEncoding x-gzip gz -# MaxKeepAliveRequests: The maximum number of requests to allow -# during a persistent connection. Set to 0 to allow an unlimited amount. -# We reccomend you leave this number high, for maximum performance. +# +# AddLanguage allows you to specify the language of a document. You can +# then use content negotiation to give a browser a file in a language +# it can understand. Note that the suffix does not have to be the same +# as the language keyword --- those with documents in Polish (whose +# net-standard language code is pl) may wish to use "AddLanguage pl .po" +# to avoid the ambiguity with the common suffix for perl scripts. +# +AddLanguage en .en +AddLanguage fr .fr +AddLanguage de .de +AddLanguage da .da +AddLanguage el .el +AddLanguage it .it -MaxKeepAliveRequests 100 +# +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# Just list the languages in decreasing order of preference. +# +LanguagePriority en fr de -# KeepAliveTimeout: Number of seconds to wait for the next request +# +# AddType allows you to tweak mime.types without actually editing it, or to +# make certain files to be certain types. +# +# For example, the PHP3 module (not part of the Apache distribution) +# will typically use: +# +#AddType application/x-httpd-php3 .phtml +#AddType application/x-httpd-php3-source .phps -KeepAliveTimeout 15 +# +# AddHandler allows you to map certain file extensions to "handlers", +# actions unrelated to filetype. These can be either built into the server +# or added with the Action command (see below) +# +# If you want to use server side includes, or CGI outside +# ScriptAliased directories, uncomment the following lines. +# +# To use CGI scripts: +# +#AddHandler cgi-script .cgi -# Apache always creates one child process to handle requests. If it -# dies another child process is created automatically. Within the -# child process multiple threads handle incoming requests. The next two -# directives determine the behaviour of the threads and processes. +# +# To use server-parsed HTML files +# +#AddType text/html .shtml +#AddHandler server-parsed .shtml -# Don't force a server to exit after it has served some number of requests. -# If you do want server's to exit after they have run for a long time (to -# help the system clean up after the process), please set this to a pretty -# large number - like 10,000. What this will do, is, each child server will -# exit after serving 10,000 requests, and another server will take its place. +# +# Uncomment the following line to enable Apache's send-asis HTTP file +# feature +# +#AddHandler send-as-is asis -MaxRequestsPerChild 0 +# +# If you wish to use server-parsed imagemap files, use +# +#AddHandler imap-file map -# Number of concurrent threads at a time (set the value to more or less -# depending on the responsiveness you want and the resources you wish -# this server to consume). +# +# To enable type maps, you might want to use +# +#AddHandler type-map var -ThreadsPerChild 50 +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# +# +# MetaDir: specifies the name of the directory in which Apache can find +# meta information files. These files contain additional HTTP headers +# to include when sending the document +# +#MetaDir .web + +# +# MetaSuffix: specifies the file name suffix for the file containing the +# meta information. +# +#MetaSuffix .meta +# +# Customizable error response (Apache style) +# these come in three flavors +# +# 1) plain text +#ErrorDocument 500 "The server made a boo boo. +# n.b. the (") marks it as text, it does not get output +# +# 2) local redirects +#ErrorDocument 404 /missing.html +# to redirect to local URL /missing.html +#ErrorDocument 404 /cgi-bin/missing_handler.pl +# N.B.: You can redirect to a script or a document using server-side-includes. +# +# 3) external redirects +#ErrorDocument 402 http://some.other_server.com/subscription_info.html +# N.B.: Many of the environment variables associated with the original +# request will *not* be available to such a script. + +# +# The following directives disable keepalives and HTTP header flushes. +# The first directive disables it for Netscape 2.x and browsers which +# spoof it. There are known problems with these. +# The second directive is for Microsoft Internet Explorer 4.0b2 +# which has a broken HTTP/1.1 implementation and does not properly +# support keepalive when it is used on 301 or 302 (redirect) responses. +# +BrowserMatch "Mozilla/2" nokeepalive +BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 + +# +# The following directive disables HTTP/1.1 responses to browsers which +# are in violation of the HTTP/1.0 spec by not being able to grok a +# basic 1.1 response. +# +BrowserMatch "RealPlayer 4\.0" force-response-1.0 +BrowserMatch "Java/1\.0" force-response-1.0 +BrowserMatch "JDK/1\.0" force-response-1.0 + +# +# Allow server status reports, with the URL of http://servername/server-status +# Change the ".your_domain.com" to match your domain to enable. +# +#<Location /server-status> +# SetHandler server-status +# Order deny,allow +# Deny from all +# Allow from .your_domain.com +#</Location> + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".your_domain.com" to match your domain to enable. +# +#<Location /server-info> +# SetHandler server-info +# Order deny,allow +# Deny from all +# Allow from .your_domain.com +#</Location> + +# +# There have been reports of people trying to abuse an old bug from pre-1.1 +# days. This bug involved a CGI script distributed as a part of Apache. +# By uncommenting these lines you can redirect these attacks to a logging +# script on phf.apache.org. Or, you can record them yourself, using the script +# support/phf_abuse_log.cgi. +# +#<Location /cgi-bin/phf*> +# Deny from all +# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi +#</Location> + +# # Proxy Server directives. Uncomment the following line to # enable the proxy server: - +# #ProxyRequests On +# # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block -#ProxyVia on +# +#ProxyVia On +# # To enable the cache as well, edit and uncomment the following lines: # (no cacheing without CacheRoot) - +# #CacheRoot "@@ServerRoot@@/proxy" - #CacheSize 5 #CacheGcInterval 4 #CacheMaxExpire 24 @@ -210,26 +747,33 @@ ThreadsPerChild 50 #CacheDefaultExpire 1 #NoCache a_domain.com another_domain.edu joes.garage_sale.com -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, in addition to the default. See also the VirtualHost command +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. +# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> +# for further details before you try to setup virtual hosts. +# You may use the command line option '-S' to verify your virtual host +# configuration. -#Listen 3000 -#Listen 12.34.56.78:80 +# +# If you want to use name-based virtual hosts you need to define at +# least one IP address (and port number) for them. +# +#NameVirtualHost 12.34.56.78:80 +#NameVirtualHost 12.34.56.78 -# VirtualHost: Allows the daemon to respond to requests for more than one -# server address, if your server machine is configured to accept IP packets -# for multiple addresses. This can be accomplished with the ifconfig -# alias flag, or through kernel patches like VIF. - -# Any httpd.conf or srm.conf directive may go into a VirtualHost command. -# See also the BindAddress entry. - -#<VirtualHost host.some_domain.com> -#ServerAdmin webmaster@host.some_domain.com -#DocumentRoot /www/docs/host.some_domain.com -#ServerName host.some_domain.com -#ErrorLog logs/host.some_domain.com-error.log -#TransferLog logs/host.some_domain.com-access.log +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# +#<VirtualHost ip.address.of.host.some_domain.com> +# ServerAdmin webmaster@host.some_domain.com +# DocumentRoot /www/docs/host.some_domain.com +# ServerName host.some_domain.com +# ErrorLog logs/host.some_domain.com-error_log +# CustomLog logs/host.some_domain.com-access_log common #</VirtualHost> - +#<VirtualHost _default_:*> +#</VirtualHost> |