diff options
Diffstat (limited to 'usr.sbin/tcpdump/smb.h')
| -rw-r--r-- | usr.sbin/tcpdump/smb.h | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/usr.sbin/tcpdump/smb.h b/usr.sbin/tcpdump/smb.h new file mode 100644 index 00000000000..e2d32618ca2 --- /dev/null +++ b/usr.sbin/tcpdump/smb.h @@ -0,0 +1,154 @@ +/* $OpenBSD: smb.h,v 1.1 2000/12/07 22:36:46 mickey Exp $ */ + +/* + Copyright (C) Andrew Tridgell 1995-1999 + + This software may be distributed either under the terms of the + BSD-style license that accompanies tcpdump or the GNU GPL version 2 + or later */ + +#define CVAL(buf,pos) (((unsigned char *)(buf))[pos]) +#define PVAL(buf,pos) ((unsigned)CVAL(buf,pos)) +#define SCVAL(buf,pos,val) (CVAL(buf,pos) = (val)) + +#define SVAL(buf,pos) (PVAL(buf,pos)|PVAL(buf,(pos)+1)<<8) +#define IVAL(buf,pos) (SVAL(buf,pos)|SVAL(buf,(pos)+2)<<16) +#define SSVALX(buf,pos,val) (CVAL(buf,pos)=(val)&0xFF,CVAL(buf,pos+1)=(val)>>8) +#define SIVALX(buf,pos,val) (SSVALX(buf,pos,val&0xFFFF),SSVALX(buf,pos+2,val>>16)) +#define SVALS(buf,pos) ((int16)SVAL(buf,pos)) +#define IVALS(buf,pos) ((int32)IVAL(buf,pos)) +#define SSVAL(buf,pos,val) SSVALX((buf),(pos),((uint16)(val))) +#define SIVAL(buf,pos,val) SIVALX((buf),(pos),((uint32)(val))) +#define SSVALS(buf,pos,val) SSVALX((buf),(pos),((int16)(val))) +#define SIVALS(buf,pos,val) SIVALX((buf),(pos),((int32)(val))) + +/* now the reverse routines - these are used in nmb packets (mostly) */ +#define SREV(x) ((((x)&0xFF)<<8) | (((x)>>8)&0xFF)) +#define IREV(x) ((SREV(x)<<16) | (SREV((x)>>16))) + +#define RSVAL(buf,pos) SREV(SVAL(buf,pos)) +#define RIVAL(buf,pos) IREV(IVAL(buf,pos)) +#define RSSVAL(buf,pos,val) SSVAL(buf,pos,SREV(val)) +#define RSIVAL(buf,pos,val) SIVAL(buf,pos,IREV(val)) + +#define uint16 unsigned short +#define uint32 unsigned int +#ifndef uchar +#define uchar unsigned char +#endif + +#ifndef MIN +#define MIN(a,b) ((a)<(b)?(a):(b)) +#endif + +/* the complete */ +#define SMBmkdir 0x00 /* create directory */ +#define SMBrmdir 0x01 /* delete directory */ +#define SMBopen 0x02 /* open file */ +#define SMBcreate 0x03 /* create file */ +#define SMBclose 0x04 /* close file */ +#define SMBflush 0x05 /* flush file */ +#define SMBunlink 0x06 /* delete file */ +#define SMBmv 0x07 /* rename file */ +#define SMBgetatr 0x08 /* get file attributes */ +#define SMBsetatr 0x09 /* set file attributes */ +#define SMBread 0x0A /* read from file */ +#define SMBwrite 0x0B /* write to file */ +#define SMBlock 0x0C /* lock byte range */ +#define SMBunlock 0x0D /* unlock byte range */ +#define SMBctemp 0x0E /* create temporary file */ +#define SMBmknew 0x0F /* make new file */ +#define SMBchkpth 0x10 /* check directory path */ +#define SMBexit 0x11 /* process exit */ +#define SMBlseek 0x12 /* seek */ +#define SMBtcon 0x70 /* tree connect */ +#define SMBtconX 0x75 /* tree connect and X*/ +#define SMBtdis 0x71 /* tree disconnect */ +#define SMBnegprot 0x72 /* negotiate protocol */ +#define SMBdskattr 0x80 /* get disk attributes */ +#define SMBsearch 0x81 /* search directory */ +#define SMBsplopen 0xC0 /* open print spool file */ +#define SMBsplwr 0xC1 /* write to print spool file */ +#define SMBsplclose 0xC2 /* close print spool file */ +#define SMBsplretq 0xC3 /* return print queue */ +#define SMBsends 0xD0 /* send single block message */ +#define SMBsendb 0xD1 /* send broadcast message */ +#define SMBfwdname 0xD2 /* forward user name */ +#define SMBcancelf 0xD3 /* cancel forward */ +#define SMBgetmac 0xD4 /* get machine name */ +#define SMBsendstrt 0xD5 /* send start of multi-block message */ +#define SMBsendend 0xD6 /* send end of multi-block message */ +#define SMBsendtxt 0xD7 /* send text of multi-block message */ + +/* Core+ protocol */ +#define SMBlockread 0x13 /* Lock a range and read */ +#define SMBwriteunlock 0x14 /* Unlock a range then write */ +#define SMBreadbraw 0x1a /* read a block of data with no smb header */ +#define SMBwritebraw 0x1d /* write a block of data with no smb header */ +#define SMBwritec 0x20 /* secondary write request */ +#define SMBwriteclose 0x2c /* write a file then close it */ + +/* dos extended protocol */ +#define SMBreadBraw 0x1A /* read block raw */ +#define SMBreadBmpx 0x1B /* read block multiplexed */ +#define SMBreadBs 0x1C /* read block (secondary response) */ +#define SMBwriteBraw 0x1D /* write block raw */ +#define SMBwriteBmpx 0x1E /* write block multiplexed */ +#define SMBwriteBs 0x1F /* write block (secondary request) */ +#define SMBwriteC 0x20 /* write complete response */ +#define SMBsetattrE 0x22 /* set file attributes expanded */ +#define SMBgetattrE 0x23 /* get file attributes expanded */ +#define SMBlockingX 0x24 /* lock/unlock byte ranges and X */ +#define SMBtrans 0x25 /* transaction - name, bytes in/out */ +#define SMBtranss 0x26 /* transaction (secondary request/response) */ +#define SMBioctl 0x27 /* IOCTL */ +#define SMBioctls 0x28 /* IOCTL (secondary request/response) */ +#define SMBcopy 0x29 /* copy */ +#define SMBmove 0x2A /* move */ +#define SMBecho 0x2B /* echo */ +#define SMBopenX 0x2D /* open and X */ +#define SMBreadX 0x2E /* read and X */ +#define SMBwriteX 0x2F /* write and X */ +#define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */ +#define SMBffirst 0x82 /* find first */ +#define SMBfunique 0x83 /* find unique */ +#define SMBfclose 0x84 /* find close */ +#define SMBinvalid 0xFE /* invalid command */ + +/* Extended 2.0 protocol */ +#define SMBtrans2 0x32 /* TRANS2 protocol set */ +#define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */ +#define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */ +#define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */ +#define SMBulogoffX 0x74 /* user logoff */ + +/* NT SMB extensions. */ +#define SMBnttrans 0xA0 /* NT transact */ +#define SMBnttranss 0xA1 /* NT transact secondary */ +#define SMBntcreateX 0xA2 /* NT create and X */ +#define SMBntcancel 0xA4 /* NT cancel */ + +/* pathworks special */ +#define pSETDIR '\377' + + +/* these are the TRANS2 sub commands */ +#define TRANSACT2_OPEN 0 +#define TRANSACT2_FINDFIRST 1 +#define TRANSACT2_FINDNEXT 2 +#define TRANSACT2_QFSINFO 3 +#define TRANSACT2_SETFSINFO 4 +#define TRANSACT2_QPATHINFO 5 +#define TRANSACT2_SETPATHINFO 6 +#define TRANSACT2_QFILEINFO 7 +#define TRANSACT2_SETFILEINFO 8 +#define TRANSACT2_FSCTL 9 +#define TRANSACT2_IOCTL 10 +#define TRANSACT2_FINDNOTIFYFIRST 11 +#define TRANSACT2_FINDNOTIFYNEXT 12 +#define TRANSACT2_MKDIR 13 + +#define PTR_DIFF(p1,p2) ((unsigned long)(((char *)(p1)) - (char *)(p2))) + +/* some protos */ +const uchar *fdata(const uchar *buf, const char *fmt, const uchar *maxbuf); |