src - OpenBSD base system

Age	Commit message (Expand)	Author
2016-09-10	Correct the path to the iomuxc fdt node so pinctrl setup will run.	Jonathan Gray
2016-09-05	Some spacing/knf while here. No functional changes.	Marcus Glocker
2016-09-05	No point to jump to an empty return label in a void function.	Marcus Glocker
2016-09-05	Remove some unused bits.	Marcus Glocker
2016-08-27	Initialize vdd to 0 in imxesdhc_bus_power() to avoiud using it uninitialized.	Mark Kettenis
2016-08-19	Seems we need to hold the PHY into reset a little bit longer. Without it	Mark Kettenis
2016-08-14	Add imxtemp(4), a temperature sensor for the i.MX6 SoC. Based on code written	Mark Kettenis
2016-08-13	Use regulalator API instead of private functions.	Mark Kettenis
2016-08-08	Implement mmc power sequencing; makes the sdo interface on the cubox-i work	Mark Kettenis
2016-08-06	Implement interrupt controller functionality in the i.MX6 GPIO	Patrick Wildt
2016-08-06	Switch imx over to the generic pinctrl API.	Mark Kettenis
2016-08-06	remove now unused board specific phy defines	Jonathan Gray
2016-08-04	Dynamically attach ampintc(4) and make it register itself as an interrupt	Mark Kettenis
2016-08-04	Add imxgpc(4), a driver for the i.MX6 General Power Controller (GPC) which	Mark Kettenis
2016-08-04	After fixing up some of the AR8035 PHY registers, issue a reset. This seems	Mark Kettenis
2016-07-27	Instead of passing the raw reg property to simplebus nodes,	Patrick Wildt
2016-07-26	Rename struct fdt_memory to fdt_reg to match the member name	Patrick Wildt
2016-07-23	Previously the uarts attached in order, so that the first attached uart	Patrick Wildt
2016-07-23	The linux kernel treated the "phy-reset-gpio" as active-low regardless of what	Mark Kettenis
2016-07-22	Attach imx(4) on i.mx6 quad plus which appears to be largely compatible	Jonathan Gray
2016-07-22	Fallback to the known fec irq number on imx.6 if the fdt	Jonathan Gray
2016-07-21	set and clear the 10baseT bit in statchg	Jonathan Gray
2016-07-14	Do board-specific delay/skew corrections for the Micrel KSZ9021 and KSZ9031	Mark Kettenis
2016-07-13	Use the device tree voltage regulator information to supply power to the USB	Mark Kettenis
2016-07-12	Turn ahci(4) glue code for the i.MX6 platform into its own imxahci(4) driver	Mark Kettenis
2016-07-12	Turn ehci(4) glue code for the i.MX6 platform into its own imxehci(4) driver	Mark Kettenis
2016-07-11	Use gpio framework to implement hardware reset of the PHY instead of	Mark Kettenis
2016-07-11	Use gpio framework to implement card detect instead of hardcoding particular	Mark Kettenis
2016-07-11	Hook up imxgpio(4) to the FDT gpio framework.	Mark Kettenis
2016-07-10	Not all i.MX6 devices have a pinctrl property in their device nodes.	Patrick Wildt
2016-07-10	Fix typo. Pointed out by patrick@	Mark Kettenis
2016-07-10	Dynamically attach imxgpio(4) using the FDT.	Mark Kettenis
2016-07-10	Add support for handling pinctrl device tree bindings to imxiomuxc(4).	Mark Kettenis
2016-07-09	Simplify the i.MX6 platform code. The list of board devices is now	Mark Kettenis
2016-07-09	Perform PHY-specific initialization based on the PHY ID instead of the	Mark Kettenis
2016-07-09	Dynamically attach i.MX6 ehci(4) using the FDT.	Mark Kettenis
2016-06-22	Fetch MAC address from FDT.	Mark Kettenis
2016-06-14	If the FDT node has a "non-removable" property, return 1 from the card	Mark Kettenis
2016-06-13	Dynamically attach imxdog(4) using the FDT.	Mark Kettenis
2016-06-13	Use "bus-width" property to determine whether 4-bit and 8-bit mode are	Mark Kettenis
2016-06-12	Dynamically attach fec(4) using the FDT.	Mark Kettenis
2016-06-11	dynamically attach imxuart using the FDT	Jonathan Gray
2016-06-09	Dynamically attach imxesdhc(4) using the FDT.	Mark Kettenis
2016-06-09	Dynamically attach i.MX6 ahci(4) using the FDT.	Mark Kettenis
2016-06-09	Make use of the information about the node passed down to us by simplebus(4).	Mark Kettenis
2016-06-08	Use fdt to find the console to initialise. Try to use /chosen/stdout-path	Jonathan Gray
2016-06-04	Remove model specific strings keyed off the board id.	Jonathan Gray
2016-06-03	rename imxenet to fec	Jonathan Gray
2016-05-21	Dynamically attach imxiic(4) and use the FDT to enumerate devices on i2c	Mark Kettenis
2016-05-20	Change the identification string to "nxp,pcf8523" as this is what is stored	Mark Kettenis