src - OpenBSD base system

Age	Commit message (Expand)	Author
2017-11-05	slight cleanup	Visa Hankala
2017-11-05	Add a function for getting the current core's hardware identifier.	Visa Hankala
2017-11-05	Remove unmaintained debug code.	Visa Hankala
2017-11-04	Since rev 1.502 of rc(8) it creates a /bsd.booted hard link. At the	Florian Obser
2017-11-04	Use the macro for cache line size.	Visa Hankala
2017-11-04	Check buffer size parameters at compile time.	Visa Hankala
2017-11-04	One macro for cache line size is enough.	Visa Hankala
2017-11-03	Remove alternative implementations of GMX CAM setup logic	Visa Hankala
2017-11-03	Fix a stupid typo.	Visa Hankala
2017-11-02	Assign each cnmac(4) port its own input work group, and assign	Visa Hankala
2017-11-01	Add readiness to utilize LMTDMA operations.	Visa Hankala
2017-11-01	Fix the addressing of CVMSEG. The base address already points to	Visa Hankala
2017-10-24	remove defines for ioctls the kernel doesn't recognise	Jonathan Gray
2017-10-16	Utilize scatter/gather DMA with the newer MMC controller.	Visa Hankala
2017-09-28	When option DDB_STRUCTINFO was removed from the kernel, too much from	Patrick Wildt
2017-09-23	Fix controller locking so that it covers the DMA map and bounce buffer.	Visa Hankala
2017-09-22	Do not bounce if possible.	Visa Hankala
2017-09-22	Allocate a bounce buffer once during init and reuse it for DMA commands.	Visa Hankala
2017-09-21	Ensure proper order of register accesses by readback after write.	Visa Hankala
2017-09-17	Do not print "cpuX launched" any longer. This reduces dmesg spam	Visa Hankala
2017-09-12	Remove option DDB_STRUCTINFO. Now that ddb(4) is CTF aware, similar	Martin Pieuchot
2017-09-08	If you use sys/param.h, you don't need sys/types.h	Theo de Raadt
2017-09-06	Allow two GMX instances on CN70xx/CN71xx to enable all ports	Visa Hankala
2017-09-04	Let octmmc(4) attach on revision 7890 controller.	Visa Hankala
2017-09-02	Let the kernel utilize the FPU if one is available, even when the	Visa Hankala
2017-08-28	swap ualea for urng	Jasper Lievisse Adriaanse
2017-08-26	Use macros for Config1 bits.	Visa Hankala
2017-08-19	Equalize the use of LINKFLAGS and STRIPFLAGS with other mips64 ports.	Visa Hankala
2017-08-19	Use --warn-common when linking.	Visa Hankala
2017-08-19	Put ${LD} in double quotes in MAKE_GAP, like has been done elsewhere.	Visa Hankala
2017-08-13	Fix a dereference of a bogus pointer.	Visa Hankala
2017-08-12	Use ctfstrip(1) by default to strip kernels.	Martin Pieuchot
2017-08-12	Add a dummy (for now) <machine/reloc.h> for mips64 to fix build.	Visa Hankala
2017-08-09	Clear any pending (edge-triggered) interrupts at setup to avoid	Visa Hankala
2017-08-01	Add a driver for the OCTEON USB3 controller bridge.	Visa Hankala
2017-07-31	Replace OCTEON_MAXCPUS with MAXCPUS to avoid redundancy.	Visa Hankala
2017-07-31	Assume edge triggering by default for robustness, as is done	Visa Hankala
2017-07-30	Bump VM_PHYSSEG_MAX.	Visa Hankala
2017-07-30	Bump MAXCPUS on octeon.	Visa Hankala
2017-07-30	Define MAXCPUS per mips64 port.	Visa Hankala
2017-07-30	Add a driver for CIU3. Not quite finished yet, but good enough for now.	Visa Hankala
2017-07-29	There is no RTC on the E300 boards.	Visa Hankala
2017-07-29	Replace a complex `if' condition with a list.	Visa Hankala
2017-07-28	Add a driver for the OCTEON SATA controller bridge.	Visa Hankala
2017-07-28	Add a workaround that allows the use of sys/dev/fdt code on octeon.	Visa Hankala
2017-07-25	rework octuctl and its children to attach via fdt	Jonathan Matthew
2017-07-25	Remove leftovers of a past softintr mechanism.	Visa Hankala
2017-07-18	Stop automatically regenerating gap.o (and hence linking a new kernel)	Theo Buehler
2017-07-16	Pass the linker from make environment to makegap.sh. This is (only)	Visa Hankala
2017-07-15	iobus_h is unused, remove it.	Visa Hankala