summaryrefslogtreecommitdiff
path: root/sys/dev/i2c
AgeCommit message (Expand)Author
2011-07-03Enter nvt(4), a driver for the W83795G and W83795ADG hardware monitor.Mark Kettenis
2011-05-26The check for the mcp98243 sdtemp(4) device was too strict. Relax it.Theo de Raadt
2011-03-10Add support for detecting the NXP SA56004X (we have not actuallyTheo de Raadt
2010-07-093 more JEDEC JC-42.4 sensors are the marketTheo de Raadt
2010-03-22Detect Nuvoton W83795G.Mark Kettenis
2010-03-22Split existing spdmem@i2c code into bus-agnostic spd record decoding code,Miod Vallat
2009-12-28correct id for 2nd type of stts424e02; from cnstTheo de Raadt
2009-10-05match() function was leaving the i2c bus locked; ok kettenisTheo de Raadt
2009-09-13Don't try to check for ECC with fbdimm as the offset exceedsJonathan Gray
2009-08-12only pull in the source file if it is needed, so that all the othersTheo de Raadt
2009-08-12Mark sensor as invalid if the i2c transaction to read its value fails.Mark Kettenis
2009-08-12New lisa(4) driver for ST LIS331DL accelerometer in HP 2133 Mini-Note PC; ok...Constantine A. Murenin
2009-07-10check 4 (instead of merely 2) addr bits for probing sdtemp(4) chips; ok deraadtConstantine A. Murenin
2009-07-10fix the complement in the 2's complement patch from yesterday; ok deraadtConstantine A. Murenin
2009-07-10support onsemi's cat34ts02 and cat6095; ok deraadtConstantine A. Murenin
2009-07-10the temperature value is really a 13-bit 2's complement; ok deraadtConstantine A. Murenin
2009-07-10fix the mask for the sign bit and some comment; ok deraadtConstantine A. Murenin
2009-05-23Seems I confused Mb and MB and was in too much of a rush when IJonathan Gray
2009-04-22remove a meaningless sensor.desc; ok deraadtConstantine A. Murenin
2009-03-14apologize (dlg and claudio, stop snickering)Theo de Raadt
2009-02-22Untested FB-DIMM decoding adapted from changes made to NetBSDJonathan Gray
2009-02-19Indicate if a thermal sensor is present on ddr3 modules.Jonathan Gray
2009-02-19Move most of spdmem match logic into the driver and add crc16/ddr3Jonathan Gray
2009-01-26Unify error message.Mark Kettenis
2008-12-12Check for zero'd spd data even if we pass the checksumJonathan Gray
2008-11-24remove more logically irrelevant DDR code from the SDR function; ok jsgConstantine A. Murenin
2008-11-13add support for ST's chip since documentation is now available atTheo de Raadt
2008-11-10remove some dead code and fix a comment; llvm/clang; ok jsgConstantine A. Murenin
2008-11-10uninitialised value caused some lmenv(4) fans to never appear sometimes;Constantine A. Murenin
2008-11-03support w83627dhg at i2c (as seen on Sun Ultra 24 via dmesg@) ok deraadt@Constantine A. Murenin
2008-09-10add support for the PCA9555 device which has 16 instead of 8 pins.Reyk Floeter
2008-06-09* fix the order of precedence in the divisor bits calculationConstantine A. Murenin
2008-05-21Print a specific message for non i2c attachments like macppcJonathan Gray
2008-05-01correct attach messagesTheo de Raadt
2008-04-23learn about the fansTheo de Raadt
2008-04-22* correct the names of the register definesConstantine A. Murenin
2008-04-22unbreak the ignore_addrs logic (the 'continue' was obviously meant to affectConstantine A. Murenin
2008-04-22handle all four temperature sensorsTheo de Raadt
2008-04-21correct negative temperatures (if they ever happen); spotted by cnstTheo de Raadt
2008-04-21improve register to temperature conversion codeTheo de Raadt
2008-04-21when iic_exec fails, return 0xff for the read value; ok jsgTheo de Raadt
2008-04-21A very very rough start at an adt7462 driverTheo de Raadt
2008-04-20two more i2c probe checks. adt has split off or been sold to ONTheo de Raadt
2008-04-18detect adm1034Theo de Raadt
2008-04-18adm1033 has a rev register to check as wellTheo de Raadt
2008-04-18correct sizeof; palmeidaTheo de Raadt
2008-04-17make it more apparent that when we are dealing with 16 bit registersTheo de Raadt
2008-04-17use sizeof(thing) instead of hard-coding itTheo de Raadt
2008-04-17use sizeof(thing) instead of hard-coding itTheo de Raadt
2008-04-16Use ntohs() to swap the raw i2c data to native format; tested by sthenTheo de Raadt
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 12:15:39 +0000