summaryrefslogtreecommitdiff
path: root/sys/dev/i2c
AgeCommit message (Expand)Author
2008-05-21Print a specific message for non i2c attachments like macppcJonathan Gray
2008-05-01correct attach messagesTheo de Raadt
2008-04-23learn about the fansTheo de Raadt
2008-04-22* correct the names of the register definesConstantine A. Murenin
2008-04-22unbreak the ignore_addrs logic (the 'continue' was obviously meant to affectConstantine A. Murenin
2008-04-22handle all four temperature sensorsTheo de Raadt
2008-04-21correct negative temperatures (if they ever happen); spotted by cnstTheo de Raadt
2008-04-21improve register to temperature conversion codeTheo de Raadt
2008-04-21when iic_exec fails, return 0xff for the read value; ok jsgTheo de Raadt
2008-04-21A very very rough start at an adt7462 driverTheo de Raadt
2008-04-20two more i2c probe checks. adt has split off or been sold to ONTheo de Raadt
2008-04-18detect adm1034Theo de Raadt
2008-04-18adm1033 has a rev register to check as wellTheo de Raadt
2008-04-18correct sizeof; palmeidaTheo de Raadt
2008-04-17make it more apparent that when we are dealing with 16 bit registersTheo de Raadt
2008-04-17use sizeof(thing) instead of hard-coding itTheo de Raadt
2008-04-17use sizeof(thing) instead of hard-coding itTheo de Raadt
2008-04-16Use ntohs() to swap the raw i2c data to native format; tested by sthenTheo de Raadt
2008-04-15Take a shot at LM76 support (13 bit temperature, 0.065 degC per LSB) forTheo de Raadt
2008-04-10MCP98242 temp sensor docs found..Theo de Raadt
2008-04-09Recognize and support the Microchip MCP9805 JC-42.2 sensor (we hope; I amTheo de Raadt
2008-04-09support the NPX SE97 tooTheo de Raadt
2008-04-07New sensor driver for JDEC JC-42.4 standard dimm temperature sensorsTheo de Raadt
2008-04-07Identify two chips which follow the JDEC JC-42.4 standard dimm temperatureTheo de Raadt
2008-04-01toast unused args from a printf call; ok deraadtConstantine A. Murenin
2008-04-01match more versions of w83793g; whilst here, also ensure that the bank 0Constantine A. Murenin
2008-04-01only need 8 words to learn about i2c spd jc-42.4 sensorsTheo de Raadt
2008-03-27test the Vdd registers of Andigilog chips against the minimum voltage readings;Constantine A. Murenin
2008-03-23New andl(4) driver for Andigilog aSC7611 Hardware Monitor.Constantine A. Murenin
2008-03-19add probe for Andigilog aSC7611; discussed with deraadtConstantine A. Murenin
2007-12-122nd two extra fans on the 5027 are encoded differently; diffTheo de Raadt
2007-12-06support sch5027 which has two extra fans and slightly different voltageTheo de Raadt
2007-12-05sch5027 probing, from remco@d-compu.dyndns.orgTheo de Raadt
2007-11-26Display module size for direct rambus rimms, not yet tested.Jonathan Gray
2007-11-26Add basic rambus decode method, showing the module type.Jonathan Gray
2007-11-25Kill spdmem_hexdump() before anyone starts using it.Miod Vallat
2007-10-31don't clear sensor flags that were never set; ok deraadtConstantine A. Murenin
2007-10-30print some word reads as well in the verbose outputTheo de Raadt
2007-10-26Phillips -> Philips in commentsMartin Reindl
2007-10-25expand range where we search for sensorsTheo de Raadt
2007-10-24remove the unused i2cbus_attach_args param from the probe functions; ok deraadtConstantine A. Murenin
2007-10-24make older gcc happierTheo de Raadt
2007-10-24fix r1.101 (2007-10-07) regression of not calling the iic_dump() for aConstantine A. Murenin
2007-10-24Uncomment PECI mode diagnosting bits.Mike Belopuhov
2007-10-24skip the ignored addresses completely (now covers the eeprom range, too); ok...Constantine A. Murenin
2007-10-20_check prototypes are no longer used (replaced by i2c_scan.c); ok deraadt@Constantine A. Murenin
2007-10-20Create memory specific decode routines to make code cleaner,Jonathan Gray
2007-10-20re-introduce the "p_clk rounding" for DDR -- they need itTheo de Raadt
2007-10-20Print the type of DIMM (SO-DIMM/Mini-DIMM/Micro-DIMM) forJonathan Gray
2007-10-20Deal with all possible 16 array offsets for tenths of a nanosecond array,Jonathan Gray