summaryrefslogtreecommitdiff
path: root/sys/dev/ic
AgeCommit message (Expand)Author
2007-09-26ep(4) is totally weird. due to hardware design limitations it playsHenning Brauer
2007-09-24Add radio tap support. We still need to calculate correct RX rate andMarcus Glocker
2007-09-23Fix page fault kernel crash when changing media and device is up.Marcus Glocker
2007-09-23Add missing device name printf arguments for firmware load error output.Marcus Glocker
2007-09-23More debug ouput cleanup.Marcus Glocker
2007-09-23Correctly clear PCI_STATUS_TARGET_TARGET_ABORT bit.Marcus Glocker
2007-09-23Properly handle the physical address in bwi_encap() as well.Jonathan Gray
2007-09-23Make sure to set physical address in bwi_newbuf()Jonathan Gray
2007-09-22replace even more ctob and btoc with ptoa and atop respectively plusMartin Reindl
2007-09-18Drag back the original DragonFlyBSD firmware loading routines, so we canMarcus Glocker
2007-09-18Only the most obvious bzero() -> M_ZERO changes. No cast changes, noKenneth R Westerback
2007-09-17If device is down, don't handle any interrupts. Even don't read theMarcus Glocker
2007-09-17Several DPRINTF arguments was missing, which can lead to ugly kernelMarcus Glocker
2007-09-17In case of IV load failure free ucode.Marcus Glocker
2007-09-17Only the most obvious bzero() -> M_ZERO changes. No cast changes, noKenneth R Westerback
2007-09-16Remove more obsolete firmware specific bits.Marcus Glocker
2007-09-16Remove obsolete firmware specific bits.Marcus Glocker
2007-09-16Better version of fake KKASSERT until they are changed properly.Jonathan Gray
2007-09-16Do sc_disable when device gets stopped.Marcus Glocker
2007-09-16Clear error before starting m_defrag() equivalent.Jonathan Gray
2007-09-16Move some noisy debug printfs to higher levels.Jonathan Gray
2007-09-16CardBus works much better when sc_enable is called.Jonathan Gray
2007-09-16Free ucode if an error happens while FW / IV load. Always return a properMarcus Glocker
2007-09-16Convert most of the remaining non firmware handling code.Jonathan Gray
2007-09-16Remove most of the __unused due to to code being enabled.Jonathan Gray
2007-09-15Adapt firmware images prefix to driver name. Needs bump to firmwareMarcus Glocker
2007-09-15Get IV load working. Simplified IV loading routine (mainly a rewrite).Marcus Glocker
2007-09-15Give hardware physical addresses and add some missingJonathan Gray
2007-09-15most of the remaining bus_dma conversionJonathan Gray
2007-09-15Convert bus_dmamap_sync() calls.Jonathan Gray
2007-09-15Convert bus_dma_load_mbuf() calls and remove unrequired callbackJonathan Gray
2007-09-15suitible -> suitableBrad Smith
2007-09-15replace ctob and btoc with ptoa and atop respectivelyMartin Reindl
2007-09-15convert bus_dmamap_unload() callsJonathan Gray
2007-09-15convert bus_dmamap_load() callsJonathan Gray
2007-09-15Properly fill in some of the pci information the driver uses internally.Jonathan Gray
2007-09-15define BWI_DEBUG to make things easierJonathan Gray
2007-09-14Get firmware load working. Adapt firmware routines that way so we canMarcus Glocker
2007-09-14Use our standard ratesets from ieee80211 instead.Marcus Glocker
2007-09-14Sort prototypes.Marcus Glocker
2007-09-14Another cleanup run.Marcus Glocker
2007-09-13Move all debug lines to DPRINTF. KNF. Fix some tweaks while there.Marcus Glocker
2007-09-13Add if_detach(). Fixes kernel crash when detaching cardbus device.Marcus Glocker
2007-09-13Fix sc_dev tweak. Device attaches with correct name now.Marcus Glocker
2007-09-13Ops, remove temporary debug line.Marcus Glocker
2007-09-13Forgot to set psc->psc_pcitag. Replace all PCI/Cardbus config spaceMarcus Glocker
2007-09-13Enable access to PCI and Cardbus config space from the driver. Lets usMarcus Glocker
2007-09-13define the fc port config page 1.David Gwynne
2007-09-12Spacing run.Marcus Glocker
2007-09-12For now just return directly from the interrupt handler, or my amd64 willMarcus Glocker