index
:
src
cvs/HEAD
kms/intel
kms/radeon
master
OpenBSD base system
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
sys
/
dev
/
pci
/
if_bgereg.h
Age
Commit message (
Expand
)
Author
2010-07-09
- Setup proper mbuf pool watermarks for BCM5717 / BCM57765 chipsets.
Stuart Henderson
2010-01-09
Add support for the Broadcom BCM57765 ASIC and newer Broadcom
Christian Weisgerber
2009-10-11
Add support for the Broadcom BCM5717 ASIC and the BCM5717 / BCM5718 chipsets.
Stuart Henderson
2009-07-21
Add a family flag for the original 5700 series chipsets. Idea from FreeBSD.
Christian Weisgerber
2009-06-19
Allow bge(4) to recognize the revisions of the 57780 ASICs. From Brad.
Christian Weisgerber
2009-06-19
Some more defines for bge(4). Mainly bits for accessing
Christian Weisgerber
2009-06-04
replace the cumbersome macros that check for chip revisions with quirk flags
Christian Weisgerber
2009-06-03
register bit definitions instead of magic numbers;
Christian Weisgerber
2009-06-02
minor tidying; from Brad; ok sthen@
Christian Weisgerber
2009-05-21
add support for BCM576x, 577xx, and some new 572x/578x devices.
Stuart Henderson
2009-04-23
Start using extended buffer descriptors on the jumbo ring and use MCLGETI to
Mark Kettenis
2008-12-23
if we cant put enough packets on the rx ring then schedule a timeout to
David Gwynne
2008-12-03
switch bge over to using MCLGETI when allocating mbufs for the rx ring.
David Gwynne
2008-11-08
brad, noone said you could go making changes like that (doubling the
Theo de Raadt
2008-11-08
Clean up some of the comments.
Brad Smith
2008-11-07
When initializing the MAC put the PHY into ready state for BCM5906
Brad Smith
2008-07-17
Add a flag and allow the driver to identify the BCM5788 chipsets. They're
Brad Smith
2008-07-16
Enable the read DMA engine's PCI read request burst length long burst
Brad Smith
2008-04-20
Add a workaround for a CRC bug errata with BCM5701 A0 and B0 chipset
Brad Smith
2008-04-03
Clean up the DMA read/write control register setup code and add some
Brad Smith
2008-03-02
Correct the comment describing the BGE_PCISTATE_PCI_BUSSPEED bit.
Brad Smith
2008-02-20
When collecting the hardware statistics add the interfaces input errors
Brad Smith
2008-02-20
when bge has link, use autopolling for link status, not direct mii polls.
Stuart Henderson
2008-02-18
Add initial bits for fiber support with the BCM5714/BCM5715/BCM5780 chipsets.
Brad Smith
2008-02-02
- Simplify statistics updates and remove redundant register reads.
Brad Smith
2008-01-31
recognize the BCM5755 C0 ASIC revision.
Brad Smith
2007-11-17
Rename fiber TBI flag from BGE_TBI to BGE_PHY_FIBER_TBI. No functional change.
Brad Smith
2007-10-13
Add support for BCM5906.
Mark Kettenis
2007-10-11
Make BGE_JUMBO_FRAMELEN big enough to include vlan tag. Fixes problems with
Mark Kettenis
2007-02-10
Add more chipset revision ids.
Kenneth R Westerback
2007-01-30
Rough in more support for 5787/5755 chips so far known to not work or
Kenneth R Westerback
2007-01-10
Flow control support for bge(4)/brgphy(4). From brad@ based on code from
Mark Kettenis
2006-12-22
Remove never used code for a BCM5700 feature (BGE_EXTRAM) that didn't
Kenneth R Westerback
2006-10-22
recognize the BCM5715 A3 chipset.
Brad Smith
2006-10-19
s/Mhz/MHz/ in comments and printf() strings
Tom Cosgrove
2006-10-17
disable the firmware fastboot feature on 5752/5755 and 5787 ASICs,
Brad Smith
2006-10-15
recognize the BCM5787 A2 chipset.
Brad Smith
2006-10-07
add a no Ethernet@Wirespeed flag.
Brad Smith
2006-10-07
add and set PHY workaround flags depending on the ASIC revision
Brad Smith
2006-10-01
pack several boolean fields into the existing bge_flags field.
Brad Smith
2006-10-01
add the PCI ids for the BCM5722, BCM5756, BCM5906 and BCM5906M chipsets.
Brad Smith
2006-09-17
add a flag to indicate which boards are only capable of 10/100 modes of
Brad Smith
2006-09-17
Readd the Dell PHY LED setup workaround and the Jumbo capability flag.
Brad Smith
2006-09-17
- correct the firmware synchronization in bge_reset(), this
Brad Smith
2006-08-29
Add support for onboard bge(4)'s on Sun UltraSPARC hardware that apparently
Mark Kettenis
2006-08-28
revert flags usage commits. too close to release. will go in post release ins...
Brad Smith
2006-08-28
add a BGE_JUMBO flag.
Brad Smith
2006-08-28
Dell PCI vendor subid.
Brad Smith
2006-08-27
pack several boolean fields into the existing bge_flags field.
Brad Smith
2006-08-16
remove the sparc64 workarounds for the jumbo frame receive ring sizes now
Brad Smith
[next]