src - OpenBSD base system

Age	Commit message (Expand)	Author
2017-01-24	add support for multiple transmit ifqueues per network interface.	David Gwynne
2017-01-22	move counting if_opackets next to counting if_obytes in if_enqueue.	David Gwynne
2016-12-09	Update the media as the last step in the SFP module configuration	Mike Belopuhov
2016-12-06	Improve error handling and don't fail if SFP module is not present;	Mike Belopuhov
2016-12-02	Disable the TX laser when interface is going down for all fiber modules	Mike Belopuhov
2016-11-30	Update media types upon SFP module change	Mike Belopuhov
2016-11-24	Enable support for the X550 family of 10 Gigabit controllers	Mike Belopuhov
2016-11-24	Fixup active media reporting for multi-speed fiber modules	Mike Belopuhov
2016-11-21	Add ability to change media type	Mike Belopuhov
2016-11-21	Factor out RSS initialization into a separate function	Mike Belopuhov
2016-11-21	Correct the test for requiring a 64 bit mem bar.	Jonathan Gray
2016-11-21	Turn on the PHY power during attach	Mike Belopuhov
2016-11-18	Sync some changes for ixgbe_initialize_receive_units	Mike Belopuhov
2016-11-18	Recognize active SPF+ DA modules as IFM_10G_SFP_CU	Mike Belopuhov
2016-11-18	Support for new GPI signals, including X550 external PHY interrupt	Mike Belopuhov
2016-11-18	Reduce difference in ixgbe_initialize_receive_units to FreeBSD;	Mike Belopuhov
2016-11-18	Minor code restructuring	Mike Belopuhov
2016-10-27	tell ix and em to use 2k+ETHER_ALIGN clusters for rx on all archs.	David Gwynne
2016-04-13	G/C IFQ_SET_READY().	Martin Pieuchot
2015-12-31	Make ixgbe_start() mpsafe. This means the driver will no longer grab the	Mark Kettenis
2015-12-18	Make ix(4) mpsafer. Take advantage of intr_barrier() to eliminate the mutex	Mark Kettenis
2015-11-25	replace IFF_OACTIVE manipulation with mpsafe operations.	David Gwynne
2015-11-20	shuffle struct ifqueue so in flight mbufs are protected by a mutex.	David Gwynne
2015-11-04	replace while (ml_dequeue()) m_freem(); with ml_purge();	David Gwynne
2015-10-25	arp_ifinit() is no longer needed.	Martin Pieuchot
2015-09-11	First step at making ix(4) MPSAVE. This is largely based on the em(4)	Claudio Jeker
2015-09-02	correct sizes for free(), sigh	Theo de Raadt
2015-09-01	sizes for free(), mostly related to firmwares.	Theo de Raadt
2015-08-29	Set the rx mbuf size to MCLBYTES + ETHER_ALIGN for strict alignment	Mark Kettenis
2015-06-24	Increment if_ipackets in if_input().	Martin Pieuchot
2015-05-21	Access to uninitialized variable fixed.	Gerhard Roth
2015-04-30	Set the correct media type for 1000baseLX SFPs.	Jonathan Gray
2015-03-20	Re-apply -r1.115 that got accidentally reverted and brought to my	Mike Belopuhov
2015-02-12	convert to if_input.	David Gwynne
2015-01-20	Make ix(4) work on strict alignment architectures. The Intel networking	Mark Kettenis
2015-01-12	When setting up advanced TX descriptor use m_getptr to locate the IP	Mike Belopuhov
2015-01-11	mallocarray() for the rx_buffer memory	Theo de Raadt
2014-12-22	unifdef INET	Ted Unangst
2014-12-13	yet more mallocarray() changes.	Doug Hogan
2014-11-27	Another spot where the VLAN tag doesn't need swapping in the currently	Brad Smith
2014-11-27	Use dv_xname instead of if_xname to establish our interrupt. The latter is	Mark Kettenis
2014-11-26	dont swap the vlan tag twice on big endian archs for transmit.	David Gwynne
2014-11-20	- Remove some unused #if 0'd code which does not pertain to OpenBSD	Brad Smith
2014-11-12	Remove SIOCSIFMTU handling and misuse of if_mtu values for MRU	Mike Belopuhov
2014-11-10	add an additional error check into the ixgbe_handle_msf	Mike Belopuhov
2014-11-10	remove pointless timeout_del/add dance in the interrupt handler	Mike Belopuhov
2014-11-10	Inadvertent ampersand has made the check to always yield truth	Mike Belopuhov
2014-11-10	Gather full statistics only when IX_DEBUG is defined	Mike Belopuhov
2014-11-10	don't try to update the link status every second	Mike Belopuhov
2014-11-10	remove ixgbe_sfp_probe since it's not called anyways	Mike Belopuhov