| Age | Commit message (Expand) | Author |
|---|
| 2020-06-26 | whitespace fixes, no functional change. | David Gwynne |
| 2020-06-26 | fix link state handling so we can see link go both up and down. | David Gwynne |
| 2020-06-25 | LUT writes go through actual regsiters on 710s, not ctl writes. | David Gwynne |
| 2020-06-25 | add rss/toeplitz support for 710 chips. | David Gwynne |
| 2020-06-25 | use the ixl_chip struct to store different rss_hena settings for 710/722 | David Gwynne |
| 2020-06-25 | add definitions for rss bits. | David Gwynne |
| 2020-06-25 | we're close to a point where the differences between 710s and 722s matter. | David Gwynne |
| 2020-06-25 | use intrmap to set up multiple queues across multiple cpus. | David Gwynne |
| 2020-06-24 | set IFQ_SET_MAXLEN to the number of slots on the tx ring, not 1. | David Gwynne |
| 2020-06-24 | get rid of the per device sff lock because we only use the global one. | David Gwynne |
| 2020-06-21 | The onboard interfaces on T7/S7 machines don't provide a valid MAC address | Jonathan Matthew |
| 2020-05-09 | Use MSI-X interrupts where available. The first vector is used for | Jonathan Matthew |
| 2020-04-22 | Use I40E_QUEUE_TYPE_EOL instead of hardcoding its value localy. | Martin Pieuchot |
| 2019-11-19 | Correct the link speed constant variables. From Shoichi Yamaguchi. | YASUOKA Masahiko |
| 2019-10-02 | When dequeuing an aqb from the live queue and move it to the idle queue, | YASUOKA Masahiko |
| 2019-09-30 | use the right values when figuring out which if_baudrate to use. | David Gwynne |
| 2019-08-27 | don't check the page number was set correctly. | David Gwynne |
| 2019-08-27 | make SIOCGIFSFFPAGE support QSFP modules better. | David Gwynne |
| 2019-07-29 | remove some VF bits now that iavf(4) exists | Jonathan Matthew |
| 2019-07-21 | apply backpressure when ifiq says the stack is getting busy | David Gwynne |
| 2019-07-04 | when the mac address changes, update the mac/vlan filters accordingly. | Jonathan Matthew |
| 2019-05-04 | fix array bounds check in ixl_search_link_speed() | Jonathan Gray |
| 2019-04-15 | Use timeout_del_barrier(9) instead of timeout_del(9) followed by | Visa Hankala |
| 2019-04-10 | Add support for X722 to ixl(4) | Peter Hessler |
| 2019-04-10 | implement support for SIOCGIFSFFPAGE | David Gwynne |
| 2019-04-01 | Enable the full pre-reset code path again, now that we've fixed the cause | Jonathan Matthew |
| 2019-04-01 | Don't use a prefetchable mapping for the registers - the controller only | Jonathan Matthew |
| 2019-03-29 | remove ifiq_barrier in ixl_down cos ifiq tasks don't use nic resources. | David Gwynne |
| 2019-03-22 | back out 1.28 | David Gwynne |
| 2019-03-22 | use a cond in ixl_atq_exec to wait for a command to be completed. | David Gwynne |
| 2019-03-22 | don't blindly complete admin queue entries | David Gwynne |
| 2019-03-21 | don't set VLAN things when configuring promisc | David Gwynne |
| 2019-03-21 | run event callbacks directly in the atq processing | David Gwynne |
| 2019-03-12 | Until we can figure out why it causes NMIs on some machines, skip the | Jonathan Matthew |
| 2019-03-06 | Ignore rx interrupts if the interface isn't supposed to be running. | Jonathan Matthew |
| 2019-03-01 | use ifiq_input instead of if_input | David Gwynne |
| 2019-02-26 | tweak the mbuf loading in the tx path so it's easier to read. | David Gwynne |
| 2019-02-26 | put the rx buffer at the end of the cluster. | David Gwynne |
| 2019-02-26 | avoid a deadlock in ixl_down when calling ifq_barrier. | David Gwynne |
| 2019-02-24 | get rid of an unused softc member | David Gwynne |
| 2019-02-01 | fix up calculation of our physical function id, making the second port | Jonathan Matthew |
| 2019-01-29 | get rid of some more debug printfs | David Gwynne |
| 2019-01-29 | don't need to print the base queue number. | David Gwynne |
| 2019-01-22 | Increase hardmtu to the maximum according to the datasheet and set the rx | Jonathan Matthew |
| 2019-01-22 | Add and remove mac filters for multicast addresses. | Jonathan Matthew |
| 2019-01-21 | also add a mac filter that ignores vlans for the broadcast address, so we can | Jonathan Matthew |
| 2019-01-20 | Replace the default mac filter with one that ignores vlans, and enable | Jonathan Matthew |
| 2019-01-20 | implement ixl_rxrinfo, dynamically allocating the buffer to prepare for | Jonathan Matthew |
| 2019-01-20 | Handle link state change interrupts by issuing IXL_AQ_OP_PHY_LINK_STATUS | Jonathan Matthew |
| 2019-01-19 | actually set CAUSE_ENA on the rx and tx queues, and re-enable interrupts | Jonathan Matthew |
