summaryrefslogtreecommitdiff
path: root/sys/dev/pci/if_sk.c
AgeCommit message (Expand)Author
2006-10-16Fix some "is is"s. ok otto@.Tom Cosgrove
2006-09-27fix the use of LIST_INSERT_HEAD in [m]sk_alloc_jumbo_mem().Brad Smith
2006-09-26Set sk_jumbo_buf to NULL if malloc() fails in the for loop withinBrad Smith
2006-09-18g/c unused SK_{SET,CLR}BIT macrosBrad Smith
2006-08-17cosmetic tweaks.Brad Smith
2006-08-17remove PCI ids which msk(4) will match against from sk(4).Brad Smith
2006-08-09revert rev 1.119 as this seems to cause problems with some PHY.Brad Smith
2006-08-04and the same goes for sk_init_yukon().Brad Smith
2006-08-04remove now redundant promiscuous mode handling code from sk_init_xmac().Brad Smith
2006-08-04refactor the promiscuous mode handling code and simplify the ioctl handler.Brad Smith
2006-08-04Fix busy check for PHY write operation with Yukon chips.Brad Smith
2006-07-30Add more strict receive path packet validation routine. PreviouslyBrad Smith
2006-07-23improved Yukon init routine with proper workaround for the PHY COMA mode.Brad Smith
2006-06-22Add appropriate swapping for big-endian systems. Allows sk(4) to workBrad Smith
2006-06-22adjust PCI ids.Brad Smith
2006-06-17add sys/timeout.hBrad Smith
2006-06-17remove some whitespace.Brad Smith
2006-06-15Fix watchdog timeout errors seen on a few systems.Brad Smith
2006-05-28- remove ETHER_MAX_LEN_JUMBO and ETHERMTU_JUMBO.Brad Smith
2006-05-28unknown ioctl is ENOTTY not EINVALJason Wright
2006-05-27remove IFCAP_JUMBO_MTU interface capabilities flag and set if_hardmtu in a fewBrad Smith
2006-05-20set if_jumbo_mtu and the IFCAP_JUMBO_MTU capabilities flag whereBrad Smith
2006-05-01Activate Tx descriptor poll timer in order to protect possible lossBrad Smith
2006-05-01Added Rx/Tx FIFO flush support for YukonBrad Smith
2006-05-01A new function sk_yukon_tick(), to handle auto-negotiation properly forBrad Smith
2006-04-30- Use SK_IS_GENESIS/SK_IS_YUKON where appropriateBrad Smith
2006-04-30- Interrupt handler now checks shared interrupt source and protectsBrad Smith
2006-04-30Update if_oerrors if we encounter watchdog error.Brad Smith
2006-04-30- Added/corrected register definitions for Yukon.Brad Smith
2006-04-23some more ANSI, KNF and other tidying up.Brad Smith
2006-04-20Fix various printf() issues: too many arguments, not enough arguments, argumentMiod Vallat
2006-04-17If there is a timeout while writing to the PHY inBrad Smith
2006-04-17Coviery CID 1108: Avoid NULL pointer deref.Brad Smith
2006-03-25allow bpf(4) to ignore packets based on their direction (inbound orDamien Miller
2006-02-13add some ASIC revisions to the various switch cases and identifyBrad Smith
2006-02-09sync PCI id.Brad Smith
2005-12-22re-work PHY setup, media handling and dual-port detection.Brad Smith
2005-12-16remove unused code to use IO space.Brad Smith
2005-12-15merge printing of the revision and the interrupt string into one printf.Brad Smith
2005-12-10sk_shutdown -> skc_shutdown and register the shutdown function withBrad Smith
2005-12-10shrink dmesg entry by one line by merging the chipset revision intoBrad Smith
2005-11-26fix interrupt moderation timer frequencies for Yukon and Yukon-II basedBrad Smith
2005-11-15more accurately reflect the naming scheme of the Marvell Yukon devices with t...Brad Smith
2005-11-07- splimp -> splnetBrad Smith
2005-10-15add 2 new Yukon PCI ids and recognize Yukon-2 EC Ultra ASIC.Brad Smith
2005-10-15update Via and 3Com ids.Brad Smith
2005-09-20memory, media handling and a bunch of register definitions for Yukon-2.Brad Smith
2005-09-20merge xmaciireg.h and yukonreg.h into if_skreg.hBrad Smith
2005-09-20shuffle some stuff from skreg to skvarBrad Smith
2005-09-17add media detection and dual port detection for Yukon-2.Brad Smith
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 04:32:40 +0000