summaryrefslogtreecommitdiff
path: root/sys/dev
AgeCommit message (Expand)Author
2008-01-26sync dma mem back to the cpu on poll failure.David Gwynne
2008-01-26despatch -> dispatchDavid Gwynne
2008-01-26newline when printing about a failure to attach.David Gwynne
2008-01-25Since TX rate control is done by the firmware, we report the maximumMarcus Glocker
2008-01-25regenBrad Smith
2008-01-25- correct a typo for the Atheros AR5311 entry.Brad Smith
2008-01-24Fix some comments.Marcus Glocker
2008-01-24We don't report the antenna in the bpf tap. Remove it.Marcus Glocker
2008-01-24Report RX rates in radio tap.Marcus Glocker
2008-01-24Create chunk and state transition functions for RAID 0.Marco Peereboom
2008-01-24Bring softraid into the world of 16 byte commands; this allows for > 2TB disksMarco Peereboom
2008-01-24provide an external hook for beeper devices just like pckbd(4) doesRobert Nagy
2008-01-24Oops, make fit in 80 cols.Marco Peereboom
2008-01-24Add IO path to RAID 0 discipline.Marco Peereboom
2008-01-24KNFMarco Peereboom
2008-01-23Cleanup cn_pri. Change constants to more meaningful names, rather thanJoel Sing
2008-01-22- Fix some ifconfig up / down tweaks.Marcus Glocker
2008-01-22Added change to parseop to support return value; removes 1/2 stack depth forJordan Hargrave
2008-01-22add Y.C. Cable USB-Serial adapterOkan Demirmen
2008-01-22regenOkan Demirmen
2008-01-22add Y.C. Cable USB vendorOkan Demirmen
2008-01-22Add splnet around mii_tick() in rl_tick().Brad Smith
2008-01-21use the right capitalization for `QLogic'Igor Sobrado
2008-01-21Add shutdown hook which resets the device when called. This solvesMarcus Glocker
2008-01-21Add support for SMC SMCWUSBT-G2.Jonathan Gray
2008-01-21regenJonathan Gray
2008-01-21add SMC SMCWUSBT-G2Jonathan Gray
2008-01-21Check against RESET_REG_SUP in FADT before doing the acpi reset danceJonathan Gray
2008-01-20Remove obsolete rateset variables.Marcus Glocker
2008-01-20Cleanup rates:Marcus Glocker
2008-01-20debug kruftMarco Peereboom
2008-01-20Read EEPROM content the other way around (from start to end).Marcus Glocker
2008-01-20Adjust level 1 debug messages.Marcus Glocker
2008-01-20regenMarcus Glocker
2008-01-20Add one more device which could work. Fix comment typo in usbdevs whileMarcus Glocker
2008-01-19Add initial scaffold for RAID 0. No IO just yet.Marco Peereboom
2008-01-19Remove printf that doesn't make sense.Marco Peereboom
2008-01-19Make the device work again on big endian archs (after firmware upgrade).Marcus Glocker
2008-01-18Print consoleness the canonical way.Mark Kettenis
2008-01-18Add LED support.Marcus Glocker
2008-01-17Remove some #if;ed out code.Mark Kettenis
2008-01-17Fix RX queue stalling by regulary reading the device statistics (with aMarcus Glocker
2008-01-17Set if_baudrate with IF_Gbps(10);Thordur I. Bjornsson
2008-01-17casts so this compiles on i386.Thordur I. Bjornsson
2008-01-17Add splnet around mii_tick() in sk_yukon_tick().Brad Smith
2008-01-17Replace firmware version 2.5.8.0 with 2.13.1.0. Firmware API slightlyMarcus Glocker
2008-01-16Set the baudrate with IF_Gbps(10); and remove anThordur I. Bjornsson
2008-01-16- Store the hw revision into a new softc field in re_attach() and referenceBrad Smith
2008-01-16- Remove a unwanted slash from a error message printfBrad Smith
2008-01-15bring in lots of ac97(4) and auvia(4) updates from NetBSDJacob Meuser
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 09:25:14 +0000