Age | Commit message (Expand) | Author |
2008-05-28 | Don't try reading the SXP_PINS_DIFF on the 10160 and 12160 SCSI controllers. | Mark Kettenis |
2008-05-28 | sync | Pierre-Yves Ritschard |
2008-05-28 | Add support for Option GlobeTrotter 3G+ cards as distributed by Orange | Pierre-Yves Ritschard |
2008-05-27 | only look up the initiator-id for SPI (aka "real scsi") controllers on | David Gwynne |
2008-05-27 | Don't print SCSI ID, it's redundant now that scsibus(4) prints the same | Mark Kettenis |
2008-05-27 | return 1 when an irq's been handled, not 0. | Owain Ainsworth |
2008-05-27 | Since the vtophys stuff was nuked, drm now works on amd64 too. Add the | Owain Ainsworth |
2008-05-27 | When i first ported the drm, i completely misunderstood the FreeBSD taskqueue | Owain Ainsworth |
2008-05-27 | Fix jiffies. | Owain Ainsworth |
2008-05-27 | Don't fail to compile when not in debug mode. | Marcus Glocker |
2008-05-27 | Instead alloacting a fix frame buffer we allocate the maximum frame size | Marcus Glocker |
2008-05-27 | Don't print SCSI ID, it's redundant now that scsibus(4) prints the same | Mark Kettenis |
2008-05-27 | Add ZyXEL G-202, which was already in usbdevs. | Jonathan Gray |
2008-05-26 | Add more ioctl's (still unfinished); VIDIOC_ENUM_FMT, VIDIOC_ENUMINPUT, | Marcus Glocker |
2008-05-26 | On sparc64, fetch "scsi-initiator-id" property from the firmware, and use | Mark Kettenis |
2008-05-26 | Limit to 80 char width and tweak comments for readability. | Jonathan Gray |
2008-05-26 | Properly handle usbd_get_interface_descriptor() returning NULL. | Jonathan Gray |
2008-05-26 | Count output packets. | Brad Smith |
2008-05-25 | use ac97 default parameters for auich(4), auixp(4) and auvia(4). | Jacob Meuser |
2008-05-25 | add a function to get default parameters for ac97 codecs. all ac97 | Jacob Meuser |
2008-05-25 | tweak the SPI port configuration if we figure out that it is not quite | David Gwynne |
2008-05-25 | Don't define EHCI_DEBUG when USB_DEBUG is defined. This to be consistent | Marc Balmer |
2008-05-25 | Spacing. Comments. strncpy() -> strlcpy(). | Marcus Glocker |
2008-05-25 | Remove redundant enabling of bus master which pci_mapreg_map() deals | Brad Smith |
2008-05-25 | Remove redundant enabling of memory space and bus master which | Brad Smith |
2008-05-24 | Add a quirk to prevent this LCD device from attaching as a HID. This is a | Chris Kuethe |
2008-05-24 | - Enable userland to read(2) video stream from /dev/video. | Marcus Glocker |
2008-05-24 | Sync the ATI IXP200 PCI id. | Brad Smith |
2008-05-24 | regen | Brad Smith |
2008-05-24 | Tweak some of the existing ATI IXP entries for more consistent | Brad Smith |
2008-05-24 | regen | Brad Smith |
2008-05-24 | There should be spaces between "product" and the vendor name. | Brad Smith |
2008-05-24 | regenerate | Chris Kuethe |
2008-05-24 | USB LCD+keyboard panel | Chris Kuethe |
2008-05-24 | And another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise. | Brad Smith |
2008-05-24 | regen | Brad Smith |
2008-05-24 | Add Fujitsu PW008GE4 | Brad Smith |
2008-05-24 | Also recognize the Schneider & Koch SK-9821/SK-9843 adapters from | Brad Smith |
2008-05-24 | regen | Brad Smith |
2008-05-24 | Add more specific PCI ids for Schneider & Koch (SysKonnect) SK-9821/SK-9843 | Brad Smith |
2008-05-24 | Store the model and revision information in the appropriate softc | Brad Smith |
2008-05-23 | Fix detection of 10baseT on rev 2 and up. | Mark Kettenis |
2008-05-23 | Another Fujitsu Gigabit Etherenet card that is a bge(4) in disguise. | Mark Kettenis |
2008-05-23 | regen | Mark Kettenis |
2008-05-23 | Add Fujitsu PW008GE5. | Mark Kettenis |
2008-05-23 | Bye bye awi(4). No net80211 love, uses its own WEP code and has not worked | Brad Smith |
2008-05-23 | Simplify the combination use of pci_mapreg_type()/pci_mapreg_map() as | Brad Smith |
2008-05-23 | Make rd act more like a 'normal' disk device, allowing the elimination of | Kenneth R Westerback |
2008-05-22 | ANSI function definitions. | Brad Smith |
2008-05-22 | sync | Theo de Raadt |