blob: 9bc581b99704d162e890ff268995d3968d7c807a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
|
dnl $OpenBSD: prep,v 1.19 2005/02/27 22:13:44 miod Exp $
Most MACHINE machines don't generally need any specific preparation.
On series 400, you will wish to configure the PROM as ``HP-UX compatible''
before installing OpenBSD. To do so, at the PROM prompt, enter ``CF'',
then ``2'' (Boot Mode Selection), then ``2'' (HP-UX Compatible). Choose
to make this setting Permanent with ``P'', then validate your changes with
``E''. Your machine will restart in HP-UX mode.
If you plan to use a serial console, you might have to flip a switch
on series 300, or configure the RS-232 interface as ``remote'' from the
Configuration menu, on series 400, except on the 425e where serial console
is selected by setting the ``service/normal'' switch in the ``service''
position. Please refer to the OpenBSD/MACHINE FAQ at
http://www.OpenBSD.org/hp300/hp300faq.html for more information about this
process.
|
