path: root/distrib/sparc/install.md

#	$OpenBSD: install.md,v 1.23 1998/10/28 17:53:29 millert Exp $
#	$NetBSD: install.md,v 1.3.2.5 1996/08/26 15:45:28 gwr Exp $
#
#
# Copyright (c) 1996 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Jason R. Thorpe.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#        This product includes software developed by the NetBSD
#        Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

#
# machine dependent section of installation/upgrade script.
#

# Machine-dependent install sets
MSGBUF=/kern/msgbuf
HOSTNAME=/kern/hostname
MDSETS="xbin xman xinc xcon"
if [ ! -f /bsd ]; then
	MDSETS="kernel ${MDSETS}"
fi

# an alias for hostname(1)
hostname() {
	if [ -x /bin/hostname ]; then
		/bin/hostname $1
	else
		if [ -z "$1" ]; then
			cat $HOSTNAME
		else
			echo $1 > $HOSTNAME
		fi
	fi
}

md_set_term() {
	if [ ! -z "$TERM" ]; then
		return
	fi
	echo -n "Specify terminal type [sun]: "
	getresp "sun"
	TERM="$resp"
	export TERM
}

md_makerootwritable() {
	# Was: do_mfs_mount "/tmp" "2048"
	# /tmp is the mount point
	# 2048 is the size in DEV_BIZE blocks

	if [ ! -w /tmp ]; then
		umount /tmp > /dev/null 2>&1
		if ! mount_mfs -s 2048 swap /tmp ; then
			cat << \__mfs_failed_1

FATAL ERROR: Can't mount the memory filesystem.

__mfs_failed_1
			exit
		fi

		# Bleh.  Give mount_mfs a chance to DTRT.
		sleep 2
	fi
}

md_get_msgbuf() {
        # Only want to see one boot's worth of info
        sed -n -f /dev/stdin $MSGBUF <<- OOF
                /^Copyright (c)/h
                /^Copyright (c)/!H
                \${
                        g
                        p
                }
	OOF
}

md_machine_arch() {
	cat /kern/machine
}

md_get_diskdevs() {
	# return available disk devices
	md_get_msgbuf | sed -n -e '1,/^OpenBSD /d' \
				-e '/^sd[0-9] /{s/ .*//;p;}' \
				-e '/^x[dy][0-9] /{s/ .*//;p;}' 
}

md_get_cddevs() {
	# return available CDROM devices
	md_get_msgbuf | sed -n -e '1,/^OpenBSD /d' \
				-e '/^cd[0-9] /{s/ .*//;p;}'
}

md_get_partition_range() {
    # return range of valid partition letters
    echo "[a-p]"
}

md_installboot() {
	local _rawdev
	local _prefix

	if [ "X${1}" = X"" ]; then
		echo "No disk device specified, you must run installboot manually."
		return
	fi
	_rawdev=/dev/r${1}c

	# use extracted mdec if it exists (may be newer)
	if [ -e /mnt/usr/mdec/boot ]; then
		_prefix=/mnt/usr/mdec
	elif [ -e /usr/mdec/boot ]; then
		_prefix=/usr/mdec
	else
		echo "No boot block prototypes found, you must run installboot manually."
		return
	fi
		
	echo "Installing boot block..."
	cp ${_prefix}/boot /mnt/boot
	sync; sync; sync
	installboot -v /mnt/boot ${_prefix}/bootxx ${_rawdev}
}

md_native_fstype() {
}

md_native_fsopts() {
}

md_checkfordisklabel() {
	# $1 is the disk to check
	local rval

	disklabel $1 > /dev/null 2> /tmp/checkfordisklabel
	if grep "no disk label" /tmp/checkfordisklabel; then
		rval=1
	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
		rval=2
	else
		rval=0
	fi

	rm -f /tmp/checkfordisklabel
	return $rval
}

md_prep_disklabel()
{
	local _disk

	_disk=$1
	md_checkfordisklabel $_disk
	case $? in
	0)
		;;
	1)
		echo "WARNING: Label on disk $_disk has no label. You will be creating a new one."
		echo
		;;
	2)
		echo "WARNING: Label on disk $_disk is corrupted. You will be repairing."
		echo
		;;
	esac

	# display example
	cat << \__md_prep_disklabel_1
If you are unsure of how to use multiple partitions properly
(ie. seperating /, /usr, /tmp, /var, /usr/local, and other things)
just split the space into a root and swap partition for now.

__md_prep_disklabel_1
	disklabel -W ${_disk}
	disklabel -E ${_disk}
}

md_copy_kernel() {
	check_kernel
}

md_welcome_banner() {
{
	if [ "$MODE" = "install" ]; then
		echo "Welcome to the OpenBSD/sparc ${VERSION_MAJOR}.${VERSION_MINOR} installation program."
		cat << \__welcome_banner_1

This program is designed to help you put OpenBSD on your disk in a simple and
rational way.

__welcome_banner_1

	else
		echo ""
		echo "Welcome to the OpenBSD/sparc ${VERSION} upgrade program."
		cat << \__welcome_banner_2

This program is designed to help you upgrade your OpenBSD system in a
simple and rational way.

As a reminder, installing the `etc' binary set is NOT recommended.
Once the rest of your system has been upgraded, you should manually
merge any changes to files in the `etc' set into those files which
already exist on your system.

__welcome_banner_2
	fi

cat << \__welcome_banner_3

As with anything which modifies your disk's contents, this program can
cause SIGNIFICANT data loss, and you are advised to make sure your
data is backed up before beginning the installation process.

Default answers are displayed in brackets after the questions.  You
can hit Control-C at any time to quit, but if you do so at a prompt,
you may have to hit return.  Also, quitting in the middle of
installation may leave your system in an inconsistent state.

__welcome_banner_3
} | more
}

md_not_going_to_install() {
	cat << \__not_going_to_install_1

OK, then.  Enter `halt' at the prompt to halt the machine.  Once the
machine has halted, power-cycle the system to load new boot code.

__not_going_to_install_1
}

md_congrats() {
	local what;
	if [ "$MODE" = "install" ]; then
		what="installed";
	else
		what="upgraded";
	fi
	cat << __congratulations_1

CONGRATULATIONS!  You have successfully $what OpenBSD!
To boot the installed system, enter halt at the command prompt. Once the
system has halted, reset the machine and boot from the disk.

__congratulations_1
}