blob: 8e481869b5687d4f8521151d7831d847fd5d3c5a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
|
# This is an example of port, the port configuration file for Taylor
# UUCP. To use it, you must compile the package with
# HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default), copy
# this file to newconfigdir as set in Makefile.in (the default is
# /usr/local/conf/uucp), and edit it as appropriate for your system.
# Everything after a '#' character is a comment. To uncomment any of
# the sample lines below, just delete the '#'.
# All ports named in the sys file must be described in a port file.
# It is also possible to describe the port directly in the sys file.
# Commands that appears before the first ``port'' command are defaults
# for all ports that appear later in the file. In this case all ports
# will default to being modems (other possible types are direct, tcp
# and tli).
type modem
# Now we describe two ports.
# This is the name of the port. This name may be used in the sys file
# to select the port, or the sys file may just specify a baud rate in
# which case the first matching unlocked port will be used.
port port1
# This is the device name to open to dial out.
device /dev/ttyd0
# This is the dialer to use, as described in the dialer file.
dialer hayes
# This is the baud rate to dial out at.
speed 2400
# Here is a second port. This is like the first, except that it uses
# a different device. It also permits a range of speeds, which is
# mainly useful if the system specifies a particular baud rate.
port port2
device /dev/ttyd1
dialer hayes
speed-range 2400 9600
|
