path: root/libexec/ftp-proxy/ftp-proxy.c

/*	$OpenBSD: ftp-proxy.c,v 1.39 2005/01/19 20:58:59 millert Exp $ */

/*
 * Copyright (c) 1996-2001
 *	Obtuse Systems Corporation.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Obtuse Systems nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY OBTUSE SYSTEMS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL OBTUSE SYSTEMS CORPORATION OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

/*
 * ftp proxy, Originally based on juniper_ftp_proxy from the Obtuse
 * Systems juniper firewall, written by Dan Boulet <danny@obtuse.com>
 * and Bob Beck <beck@obtuse.com>
 *
 * This version basically passes everything through unchanged except
 * for the PORT and the * "227 Entering Passive Mode" reply.
 *
 * A PORT command is handled by noting the IP address and port number
 * specified and then configuring a listen port on some very high port
 * number and telling the server about it using a PORT message.
 * We then watch for an in-bound connection on the port from the server
 * and connect to the client's port when it happens.
 *
 * A "227 Entering Passive Mode" reply is handled by noting the IP address
 * and port number specified and then configuring a listen port on some
 * very high port number and telling the client about it using a
 * "227 Entering Passive Mode" reply.
 * We then watch for an in-bound connection on the port from the client
 * and connect to the server's port when it happens.
 *
 * supports tcp wrapper lookups/access control with the -w flag using
 * the real destination address - the tcp wrapper stuff is done after
 * the real destination address is retrieved from pf
 *
 */

/*
 * TODO:
 * Plenty, this is very basic, with the idea to get it in clean first.
 *
 * - IPv6 and EPASV support
 * - Content filter support
 * - filename filter support
 * - per-user rules perhaps.
 */

#include <sys/param.h>
#include <sys/time.h>
#include <sys/socket.h>

#include <net/if.h>
#include <netinet/in.h>

#include <arpa/inet.h>

#include <ctype.h>
#include <errno.h>
#include <grp.h>
#include <netdb.h>
#include <pwd.h>
#include <signal.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <syslog.h>
#include <unistd.h>

#include "util.h"

#ifdef LIBWRAP
#include <tcpd.h>
int allow_severity = LOG_INFO;
int deny_severity = LOG_NOTICE;
#endif /* LIBWRAP */

int min_port = IPPORT_HIFIRSTAUTO;
int max_port = IPPORT_HILASTAUTO;

#define STARTBUFSIZE  1024	/* Must be at least 3 */

/*
 * Variables used to support PORT mode connections.
 *
 * This gets a bit complicated.
 *
 * If PORT mode is on then client_listen_sa describes the socket that
 * the real client is listening on and server_listen_sa describes the
 * socket that we are listening on (waiting for the real server to connect
 * with us).
 *
 * If PASV mode is on then client_listen_sa describes the socket that
 * we are listening on (waiting for the real client to connect to us on)
 * and server_listen_sa describes the socket that the real server is
 * listening on.
 *
 * If the socket we are listening on gets a connection then we connect
 * to the other side's socket.  Similarly, if a connected socket is
 * shutdown then we shutdown the other side's socket.
 */

double xfer_start_time;

struct sockaddr_in real_server_sa;
struct sockaddr_in client_listen_sa;
struct sockaddr_in server_listen_sa;
struct sockaddr_in proxy_sa;
struct in_addr src_addr;

int client_listen_socket = -1;	/* Only used in PASV mode */
int client_data_socket = -1;	/* Connected socket to real client */
int server_listen_socket = -1;	/* Only used in PORT mode */
int server_data_socket = -1;	/* Connected socket to real server */
int client_data_bytes, server_data_bytes;

int AnonFtpOnly;
int Verbose;
int NatMode;
int ReverseMode;

char ClientName[NI_MAXHOST];
char RealServerName[NI_MAXHOST];
char OurName[NI_MAXHOST];

char *User = "proxy";
char *Group;

extern int Debug_Level;
extern int Use_Rdns;
extern in_addr_t Bind_Addr;
extern char *__progname;

typedef enum {
	UNKNOWN_MODE,
	PORT_MODE,
	PASV_MODE,
	EPRT_MODE,
	EPSV_MODE
} connection_mode_t;

connection_mode_t connection_mode;

extern void	debuglog(int debug_level, const char *fmt, ...);
double		wallclock_time(void);
void		show_xfer_stats(void);
void		log_control_command (char *cmd, int client);
int		new_dataconn(int server);
void		do_client_cmd(struct csiob *client, struct csiob *server);
void		do_server_reply(struct csiob *server, struct csiob *client);
static void
usage(void)
{
	syslog(LOG_NOTICE,
	    "usage: %s [-AnrVw] [-a address] [-D debuglevel] [-g group]"
	    " [-M maxport] [-m minport] [-R address[:port]] [-S address]"
	    " [-t timeout] [-u user]", __progname);
	exit(EX_USAGE);
}

static void
close_client_data(void)
{
	if (client_data_socket >= 0) {
		shutdown(client_data_socket, 2);
		close(client_data_socket);
		client_data_socket = -1;
	}
}

static void
close_server_data(void)
{
	if (server_data_socket >= 0)  {
		shutdown(server_data_socket, 2);
		close(server_data_socket);
		server_data_socket = -1;
	}
}

static void
drop_privs(void)
{
	struct passwd *pw;
	struct group *gr;
	uid_t uid = 0;
	gid_t gid = 0;

	if (User != NULL) {
		pw = getpwnam(User);
		if (pw == NULL) {
			syslog(LOG_ERR, "cannot find user %s", User);
			exit(EX_USAGE);
		}
		uid = pw->pw_uid;
		gid = pw->pw_gid;
	}

	if (Group != NULL) {
		gr = getgrnam(Group);
		if (gr == NULL) {
			syslog(LOG_ERR, "cannot find group %s", Group);
			exit(EX_USAGE);
		}
		gid = gr->gr_gid;
	}

	if (gid != 0 && (setegid(gid) == -1 || setgid(gid) == -1)) {
		syslog(LOG_ERR, "cannot drop group privs (%m)");
		exit(EX_CONFIG);
	}

	if (uid != 0 && (seteuid(uid) == -1 || setuid(uid) == -1)) {
		syslog(LOG_ERR, "cannot drop root privs (%m)");
		exit(EX_CONFIG);
	}
}

#ifdef LIBWRAP
/*
 * Check a connection against the tcpwrapper, log if we're going to
 * reject it, returns: 0 -> reject, 1 -> accept. We add in hostnames
 * if we are set to do reverse DNS, otherwise no.
 */
static int
check_host(struct sockaddr_in *client_sin, struct sockaddr_in *server_sin)
{
	char cname[NI_MAXHOST];
	char sname[NI_MAXHOST];
	struct request_info request;
	int i;

	request_init(&request, RQ_DAEMON, __progname, RQ_CLIENT_SIN,
	    client_sin, RQ_SERVER_SIN, server_sin, RQ_CLIENT_ADDR,
	    inet_ntoa(client_sin->sin_addr), 0);

	if (Use_Rdns)  {
		/*
		 * We already looked these up, but we have to do it again
		 * for tcp wrapper, to ensure that we get the DNS name, since
		 * the tcp wrapper cares about these things, and we don't
		 * want to pass in a printed address as a name.
		 */
		i = getnameinfo((struct sockaddr *) &client_sin->sin_addr,
		    sizeof(&client_sin->sin_addr), cname, sizeof(cname),
		    NULL, 0, NI_NAMEREQD);

		if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN)
			strlcpy(cname, STRING_UNKNOWN, sizeof(cname));

		i = getnameinfo((struct sockaddr *)&server_sin->sin_addr,
		    sizeof(&server_sin->sin_addr), sname, sizeof(sname),
		    NULL, 0, NI_NAMEREQD);

		if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN)
			strlcpy(sname, STRING_UNKNOWN, sizeof(sname));
	} else {
		/*
		 * ensure the TCP wrapper doesn't start doing
		 * reverse DNS lookups if we aren't supposed to.
		 */
		strlcpy(cname, STRING_UNKNOWN, sizeof(cname));
		strlcpy(sname, STRING_UNKNOWN, sizeof(sname));
	}

	request_set(&request, RQ_SERVER_ADDR, inet_ntoa(server_sin->sin_addr),
	    0);
	request_set(&request, RQ_CLIENT_NAME, cname, RQ_SERVER_NAME, sname, 0);

	if (!hosts_access(&request)) {
		syslog(LOG_NOTICE, "tcpwrappers rejected: %s -> %s",
		    ClientName, RealServerName);
		return(0);
	}
	return(1);
}
#endif /* LIBWRAP */

double
wallclock_time(void)
{
	struct timeval tv;

	gettimeofday(&tv, NULL);
	return(tv.tv_sec + tv.tv_usec / 1e6);
}

/*
 * Show the stats for this data transfer
 */
void
show_xfer_stats(void)
{
	char tbuf[1000];
	double delta;
	size_t len;
	int i;

	if (!Verbose)
		return;

	delta = wallclock_time() - xfer_start_time;

	if (delta < 0.001)
		delta = 0.001;

	if (client_data_bytes == 0 && server_data_bytes == 0) {
		syslog(LOG_INFO,
		  "data transfer complete (no bytes transferred)");
		return;
	}

	len = sizeof(tbuf);

	if (delta >= 60) {
		int idelta;

		idelta = delta + 0.5;
		if (idelta >= 60*60) {
			i = snprintf(tbuf, len,
			    "data transfer complete (%dh %dm %ds",
			    idelta / (60*60), (idelta % (60*60)) / 60,
			    idelta % 60);
			if (i >= len)
				goto logit;
			len -= i;
		} else {
			i = snprintf(tbuf, len,
			    "data transfer complete (%dm %ds", idelta / 60,
			    idelta % 60);
			if (i >= len)
				goto logit;
			len -= i;
		}
	} else {
		i = snprintf(tbuf, len, "data transfer complete (%.1fs",
		    delta);
		if (i >= len)
			goto logit;
		len -= i;
	}

	if (client_data_bytes > 0) {
		i = snprintf(&tbuf[strlen(tbuf)], len,
		    ", %d bytes to server) (%.1fKB/s", client_data_bytes,
		    (client_data_bytes / delta) / (double)1024);
		if (i >= len)
			goto logit;
		len -= i;
	}
	if (server_data_bytes > 0) {
		i = snprintf(&tbuf[strlen(tbuf)], len,
		    ", %d bytes to client) (%.1fKB/s", server_data_bytes,
		    (server_data_bytes / delta) / (double)1024);
		if (i >= len)
			goto logit;
		len -= i;
	}
	strlcat(tbuf, ")", sizeof(tbuf));
 logit:
	syslog(LOG_INFO, "%s", tbuf);
}

void
log_control_command (char *cmd, int client)
{
	/* log an ftp control command or reply */
	char *logstring;
	int level = LOG_DEBUG;

	if (!Verbose)
		return;

	/* don't log passwords */
	if (strncasecmp(cmd, "pass ", 5) == 0)
		logstring = "PASS XXXX";
	else
		logstring = cmd;
	if (client) {
		/* log interesting stuff at LOG_INFO, rest at LOG_DEBUG */
		if ((strncasecmp(cmd, "user ", 5) == 0) ||
		    (strncasecmp(cmd, "retr ", 5) == 0) ||
		    (strncasecmp(cmd, "cwd ", 4) == 0) ||
		    (strncasecmp(cmd, "stor " ,5) == 0))
			level = LOG_INFO;
	}
	syslog(level, "%s %s", client ? "client:" : " server:",
	    logstring);
}

/*
 * set ourselves up for a new data connection. Direction is toward client if
 * "server" is 0, towards server otherwise.
 */
int
new_dataconn(int server)
{
	/*
	 * Close existing data conn.
	 */

	if (client_listen_socket != -1) {
		close(client_listen_socket);
		client_listen_socket = -1;
	}
	close_client_data();

	if (server_listen_socket != -1) {
		close(server_listen_socket);
		server_listen_socket = -1;
	}
	close_server_data();

	if (server) {
		bzero(&server_listen_sa, sizeof(server_listen_sa));
		server_listen_socket = get_backchannel_socket(SOCK_STREAM,
		    min_port, max_port, -1, 1, &server_listen_sa);

		if (server_listen_socket == -1) {
			syslog(LOG_INFO, "server socket bind() failed (%m)");
			exit(EX_OSERR);
		}
		if (listen(server_listen_socket, 5) != 0) {
			syslog(LOG_INFO, "server socket listen() failed (%m)");
			exit(EX_OSERR);
		}
	} else {
		bzero(&client_listen_sa, sizeof(client_listen_sa));
		client_listen_socket = get_backchannel_socket(SOCK_STREAM,
		    min_port, max_port, -1, 1, &client_listen_sa);

		if (client_listen_socket == -1) {
			syslog(LOG_NOTICE,
			    "cannot get client listen socket (%m)");
			exit(EX_OSERR);
		}
		if (listen(client_listen_socket, 5) != 0) {
			syslog(LOG_NOTICE,
			    "cannot listen on client socket (%m)");
			exit(EX_OSERR);
		}
	}
	return(0);
}

static void
connect_pasv_backchannel(void)
{
	struct sockaddr_in listen_sa;
	socklen_t salen;

	/*
	 * We are about to accept a connection from the client.
	 * This is a PASV data connection.
	 */
	debuglog(2, "client listen socket ready");

	close_server_data();
	close_client_data();

	salen = sizeof(listen_sa);
	client_data_socket = accept(client_listen_socket,
	    (struct sockaddr *)&listen_sa, &salen);

	if (client_data_socket < 0) {
		syslog(LOG_NOTICE, "accept() failed (%m)");
		exit(EX_OSERR);
	}
	close(client_listen_socket);
	client_listen_socket = -1;
	memset(&listen_sa, 0, sizeof(listen_sa));

	server_data_socket = get_backchannel_socket(SOCK_STREAM, min_port,
	    max_port, -1, 1, &listen_sa);
	if (server_data_socket < 0) {
		syslog(LOG_NOTICE, "get_backchannel_socket() failed (%m)");
		exit(EX_OSERR);
	}
	if (connect(server_data_socket, (struct sockaddr *) &server_listen_sa,
	    sizeof(server_listen_sa)) != 0) {
		syslog(LOG_NOTICE, "connect() failed (%m)");
		exit(EX_NOHOST);
	}
	client_data_bytes = 0;
	server_data_bytes = 0;
	xfer_start_time = wallclock_time();
}

static void
connect_port_backchannel(void)
{
	struct sockaddr_in listen_sa;
	socklen_t salen;

	/*
	 * We are about to accept a connection from the server.
	 * This is a PORT or EPRT data connection.
	 */
	debuglog(2, "server listen socket ready");

	close_server_data();
	close_client_data();

	salen = sizeof(listen_sa);
	server_data_socket = accept(server_listen_socket,
	    (struct sockaddr *)&listen_sa, &salen);
	if (server_data_socket < 0) {
		syslog(LOG_NOTICE, "accept() failed (%m)");
		exit(EX_OSERR);
	}
	close(server_listen_socket);
	server_listen_socket = -1;

	if (getuid() != 0)  {
		/*
		 * We're not running as root, so we get a backchannel
		 * socket bound in our designated range, instead of
		 * getting one bound to port 20 - This is deliberately
		 * not RFC compliant.
		 */
		bcopy(&src_addr, &listen_sa.sin_addr, sizeof(struct in_addr));
		client_data_socket =  get_backchannel_socket(SOCK_STREAM,
		    min_port, max_port, -1, 1, &listen_sa);
		if (client_data_socket < 0) {
			syslog(LOG_NOTICE,  "get_backchannel_socket() failed (%m)");
			exit(EX_OSERR);
		}

	} else {

		/*
		 * We're root, get our backchannel socket bound to port
		 * 20 here, so we're fully RFC compliant.
		 */
		client_data_socket = socket(AF_INET, SOCK_STREAM, 0);

		salen = 1;
		listen_sa.sin_family = AF_INET;
		bcopy(&src_addr, &listen_sa.sin_addr, sizeof(struct in_addr));
		listen_sa.sin_port = htons(20);

		if (setsockopt(client_data_socket, SOL_SOCKET, SO_REUSEADDR,
		    &salen, sizeof(salen)) == -1) {
			syslog(LOG_NOTICE, "setsockopt() failed (%m)");
			exit(EX_OSERR);
		}

		if (bind(client_data_socket, (struct sockaddr *)&listen_sa,
		    sizeof(listen_sa)) == - 1) {
			syslog(LOG_NOTICE, "data channel bind() failed (%m)");
			exit(EX_OSERR);
		}
	}

	if (connect(client_data_socket, (struct sockaddr *) &client_listen_sa,
	    sizeof(client_listen_sa)) != 0) {
		syslog(LOG_INFO, "cannot connect data channel (%m)");
		exit(EX_NOHOST);
	}

	client_data_bytes = 0;
	server_data_bytes = 0;
	xfer_start_time = wallclock_time();
}

void
do_client_cmd(struct csiob *client, struct csiob *server)
{
	int i, j, rv;
	char tbuf[100];
	char *sendbuf = NULL;

	log_control_command((char *)client->line_buffer, 1);

	/* client->line_buffer is an ftp control command.
	 * There is no reason for these to be very long.
	 * In the interest of limiting buffer overrun attempts,
	 * we catch them here.
	 */
	if (strlen((char *)client->line_buffer) > 512) {
		syslog(LOG_NOTICE, "excessively long control command");
		exit(EX_DATAERR);
	}

	/*
	 * Check the client user provided if needed
	 */
	if (AnonFtpOnly && strncasecmp((char *)client->line_buffer, "user ",
	    strlen("user ")) == 0) {
		char *cp;

		cp = (char *) client->line_buffer + strlen("user ");
		if ((strcasecmp(cp, "ftp\r\n") != 0) &&
		    (strcasecmp(cp, "anonymous\r\n") != 0)) {
			/*
			 * this isn't anonymous - give the client an
			 * error before they send a password
			 */
			snprintf(tbuf, sizeof(tbuf),
			    "500 Only anonymous FTP is allowed\r\n");
			j = 0;
			i = strlen(tbuf);
			do {
				rv = send(client->fd, tbuf + j, i - j, 0);
				if (rv == -1 && errno != EAGAIN &&
				    errno != EINTR)
					break;
				else if (rv != -1)
					j += rv;
			} while (j >= 0 && j < i);
			sendbuf = NULL;
		} else
			sendbuf = (char *)client->line_buffer;
	} else if ((strncasecmp((char *)client->line_buffer, "eprt ",
	    strlen("eprt ")) == 0)) {

		/* Watch out for EPRT commands */
		char *line = NULL,  *q, *p, *result[3], delim;
		struct addrinfo hints, *res = NULL;
		unsigned long proto;

		j = 0;
		line = strdup((char *)client->line_buffer+strlen("eprt "));
		if (line == NULL) {
			syslog(LOG_ERR, "insufficient memory");
			exit(EX_UNAVAILABLE);
		}
		p = line;
		delim = p[0];
		p++;

		memset(result,0, sizeof(result));
		for (i = 0; i < 3; i++) {
			q = strchr(p, delim);
			if (!q || *q != delim)
				goto parsefail;
			*q++ = '\0';
			result[i] = p;
			p = q;
		}

		proto = strtoul(result[0], &p, 10);
		if (!*result[0] || *p)
			goto protounsupp;

		memset(&hints, 0, sizeof(hints));
		if (proto != 1) /* 1 == AF_INET - all we support for now */
			goto protounsupp;
		hints.ai_family = AF_INET;
		hints.ai_socktype = SOCK_STREAM;
		hints.ai_flags = AI_NUMERICHOST;	/*no DNS*/
		if (getaddrinfo(result[1], result[2], &hints, &res))
			goto parsefail;
		if (res->ai_next)
			goto parsefail;
		if (sizeof(client_listen_sa) < res->ai_addrlen)
			goto parsefail;
		memcpy(&client_listen_sa, res->ai_addr, res->ai_addrlen);

		debuglog(1, "client wants us to use %s:%u",
		    inet_ntoa(client_listen_sa.sin_addr),
		    htons(client_listen_sa.sin_port));

		/*
		 * Configure our own listen socket and tell the server about it
		 */
		new_dataconn(1);
		connection_mode = EPRT_MODE;

		debuglog(1, "we want server to use %s:%u",
		    inet_ntoa(server->sa.sin_addr),
		    ntohs(server_listen_sa.sin_port));

		snprintf(tbuf, sizeof(tbuf), "EPRT |%d|%s|%u|\r\n", 1,
		    inet_ntoa(server->sa.sin_addr),
		    ntohs(server_listen_sa.sin_port));
		debuglog(1, "to server (modified): %s", tbuf);
		sendbuf = tbuf;
		goto out;
parsefail:
		snprintf(tbuf, sizeof(tbuf),
		    "500 Invalid argument; rejected\r\n");
		sendbuf = NULL;
		goto out;
protounsupp:
		/* we only support AF_INET for now */
		if (proto == 2)
			snprintf(tbuf, sizeof(tbuf),
			    "522 Protocol not supported, use (1)\r\n");
		else
			snprintf(tbuf, sizeof(tbuf),
			    "501 Protocol not supported\r\n");
		sendbuf = NULL;
out:
		if (line)
			free(line);
		if (res)
			freeaddrinfo(res);
		if (sendbuf == NULL) {
			debuglog(1, "to client (modified): %s", tbuf);
			i = strlen(tbuf);
			do {
				rv = send(client->fd, tbuf + j, i - j, 0);
				if (rv == -1 && errno != EAGAIN &&
				    errno != EINTR)
					break;
				else if (rv != -1)
					j += rv;
			} while (j >= 0 && j < i);
		}
	} else if (!NatMode && (strncasecmp((char *)client->line_buffer,
	    "epsv", strlen("epsv")) == 0)) {

		/*
		 * If we aren't in NAT mode, deal with EPSV.
		 * EPSV is a problem - Unlike PASV, the reply from the
		 * server contains *only* a port, we can't modify the reply
		 * to the client and get the client to connect to us without
		 * resorting to using a dynamic rdr rule we have to add in
		 * for the reply to this connection, and take away afterwards.
		 * so this will wait until we have the right solution for rule
		 * additions/deletions in pf.
		 *
		 * in the meantime we just tell the client we don't do it,
		 * and most clients should fall back to using PASV.
		 */

		snprintf(tbuf, sizeof(tbuf),
		    "500 EPSV command not understood\r\n");
		debuglog(1, "to client (modified): %s", tbuf);
		j = 0;
		i = strlen(tbuf);
		do {
			rv = send(client->fd, tbuf + j, i - j, 0);
			if (rv == -1 && errno != EAGAIN && errno != EINTR)
				break;
			else if (rv != -1)
				j += rv;
		} while (j >= 0 && j < i);
		sendbuf = NULL;
	} else if (strncasecmp((char *)client->line_buffer, "port ",
	    strlen("port ")) == 0) {
		unsigned int values[6];
		char *tailptr;

		debuglog(1, "Got a PORT command");

		tailptr = (char *)&client->line_buffer[strlen("port ")];
		values[0] = 0;

		i = sscanf(tailptr, "%u,%u,%u,%u,%u,%u", &values[0],
		    &values[1], &values[2], &values[3], &values[4],
		    &values[5]);
		if (i != 6) {
			syslog(LOG_INFO, "malformed PORT command (%s)",
			    client->line_buffer);
			exit(EX_DATAERR);
		}

		for (i = 0; i<6; i++) {
			if (values[i] > 255) {
				syslog(LOG_INFO,
				    "malformed PORT command (%s)",
				    client->line_buffer);
				exit(EX_DATAERR);
			}
		}

		client_listen_sa.sin_family = AF_INET;
		client_listen_sa.sin_addr.s_addr = htonl((values[0] << 24) |
		    (values[1] << 16) | (values[2] <<  8) |
		    (values[3] <<  0));

		client_listen_sa.sin_port = htons((values[4] << 8) |
		    values[5]);
		debuglog(1, "client wants us to use %u.%u.%u.%u:%u",
		    values[0], values[1], values[2], values[3],
		    (values[4] << 8) | values[5]);

		/*
		 * Configure our own listen socket and tell the server about it
		 */
		new_dataconn(1);
		connection_mode = PORT_MODE;

		debuglog(1, "we want server to use %s:%u",
		    inet_ntoa(server->sa.sin_addr),
		    ntohs(server_listen_sa.sin_port));

		snprintf(tbuf, sizeof(tbuf), "PORT %u,%u,%u,%u,%u,%u\r\n",
		    ((u_char *)&server->sa.sin_addr.s_addr)[0],
		    ((u_char *)&server->sa.sin_addr.s_addr)[1],
		    ((u_char *)&server->sa.sin_addr.s_addr)[2],
		    ((u_char *)&server->sa.sin_addr.s_addr)[3],
		    ((u_char *)&server_listen_sa.sin_port)[0],
		    ((u_char *)&server_listen_sa.sin_port)[1]);

		debuglog(1, "to server (modified): %s", tbuf);

		sendbuf = tbuf;
	} else
		sendbuf = (char *)client->line_buffer;

	/*
	 *send our (possibly modified) control command in sendbuf
	 * on it's way to the server
	 */
	if (sendbuf != NULL) {
		j = 0;
		i = strlen(sendbuf);
		do {
			rv = send(server->fd, sendbuf + j, i - j, 0);
			if (rv == -1 && errno != EAGAIN && errno != EINTR)
				break;
			else if (rv != -1)
				j += rv;
		} while (j >= 0 && j < i);
	}
}

void
do_server_reply(struct csiob *server, struct csiob *client)
{
	int code, i, j, rv;
	struct in_addr *iap;
	static int continuing = 0;
	char tbuf[100], *sendbuf, *p;

	log_control_command((char *)server->line_buffer, 0);

	if (strlen((char *)server->line_buffer) > 512) {
		/*
		 * someone's playing games. Have a cow in the syslogs and
		 * exit - we don't pass this on for fear of hurting
		 * our other end, which might be poorly implemented.
		 */
		syslog(LOG_NOTICE, "long FTP control reply");
		exit(EX_DATAERR);
	}

	/*
	 * Watch out for "227 Entering Passive Mode ..." replies
	 */
	code = strtol((char *)server->line_buffer, &p, 10);
	if (isspace(server->line_buffer[0]))
		code = 0;
	if (!*(server->line_buffer) || (*p != ' ' && *p != '-')) {
		if (continuing)
			goto sendit;
		syslog(LOG_INFO, "malformed control reply");
		exit(EX_DATAERR);
	}
	if (code <= 0 || code > 999) {
		if (continuing)
			goto sendit;
		syslog(LOG_INFO, "invalid server reply code %d", code);
		exit(EX_DATAERR);
	}
	if (*p == '-')
		continuing = 1;
	else
		continuing = 0;
	if (code == 227 && !NatMode) {
		unsigned int values[6];
		char *tailptr;

		debuglog(1, "Got a PASV reply");
		debuglog(1, "{%s}", (char *)server->line_buffer);

		tailptr = (char *)strchr((char *)server->line_buffer, '(');
		if (tailptr == NULL) {
			tailptr = strrchr((char *)server->line_buffer, ' ');
			if (tailptr == NULL) {
				syslog(LOG_NOTICE, "malformed 227 reply");
				exit(EX_DATAERR);
			}
		}
		tailptr++; /* skip past space or ( */

		values[0] = 0;

		i = sscanf(tailptr, "%u,%u,%u,%u,%u,%u", &values[0],
		    &values[1], &values[2], &values[3], &values[4],
		    &values[5]);
		if (i != 6) {
			syslog(LOG_INFO, "malformed PASV reply (%s)",
			    client->line_buffer);
			exit(EX_DATAERR);
		}
		for (i = 0; i<6; i++)
			if (values[i] > 255) {
				syslog(LOG_INFO, "malformed PASV reply(%s)",
				    client->line_buffer);
				exit(EX_DATAERR);
			}

		server_listen_sa.sin_family = AF_INET;
		server_listen_sa.sin_addr.s_addr = htonl((values[0] << 24) |
		    (values[1] << 16) | (values[2] <<  8) | (values[3] <<  0));
		server_listen_sa.sin_port = htons((values[4] << 8) |
		    values[5]);

		debuglog(1, "server wants us to use %s:%u",
		    inet_ntoa(server_listen_sa.sin_addr), (values[4] << 8) |
		    values[5]);

		new_dataconn(0);
		connection_mode = PASV_MODE;
		if (ReverseMode)
			iap = &(proxy_sa.sin_addr);
		else
			iap = &(server->sa.sin_addr);

		debuglog(1, "we want client to use %s:%u", inet_ntoa(*iap),
		    htons(client_listen_sa.sin_port));

		snprintf(tbuf, sizeof(tbuf),
		    "227 Entering Passive Mode (%u,%u,%u,%u,%u,%u)\r\n",
		    ((u_char *)iap)[0], ((u_char *)iap)[1],
		    ((u_char *)iap)[2], ((u_char *)iap)[3],
		    ((u_char *)&client_listen_sa.sin_port)[0],
		    ((u_char *)&client_listen_sa.sin_port)[1]);
		debuglog(1, "to client (modified): %s", tbuf);
		sendbuf = tbuf;
	} else {
 sendit:
		sendbuf = (char *)server->line_buffer;
	}

	/*
	 * send our (possibly modified) control command in sendbuf
	 * on it's way to the client
	 */
	j = 0;
	i = strlen(sendbuf);
	do {
		rv = send(client->fd, sendbuf + j, i - j, 0);
		if (rv == -1 && errno != EAGAIN && errno != EINTR)
			break;
		else if (rv != -1)
			j += rv;
	} while (j >= 0 && j < i);

}

int
main(int argc, char *argv[])
{
	struct csiob client_iob, server_iob;
	struct sigaction new_sa, old_sa;
	int sval, ch, flags, i;
	socklen_t salen;
	int one = 1;
	long timeout_seconds = 0;
	struct timeval tv;
#ifdef LIBWRAP
	int use_tcpwrapper = 0;
#endif /* LIBWRAP */

	while ((ch = getopt(argc, argv, "a:D:g:m:M:R:S:t:u:AnVwr")) != -1) {
		char *p;
		switch (ch) {
		case 'a':
			if (!*optarg)
				usage();
			if ((Bind_Addr = inet_addr(optarg)) == INADDR_NONE) {
				syslog(LOG_NOTICE,
					"%s: invalid address", optarg);
				usage();
			}
			break;
		case 'A':
			AnonFtpOnly = 1; /* restrict to anon usernames only */
			break;
		case 'D':
			Debug_Level = strtol(optarg, &p, 10);
			if (!*optarg || *p)
				usage();
			break;
		case 'g':
			Group = optarg;
			break;
		case 'm':
			min_port = strtol(optarg, &p, 10);
			if (!*optarg || *p)
				usage();
			if (min_port < 0 || min_port > USHRT_MAX)
				usage();
			break;
		case 'M':
			max_port = strtol(optarg, &p, 10);
			if (!*optarg || *p)
				usage();
			if (max_port < 0 || max_port > USHRT_MAX)
				usage();
			break;
		case 'n':
			NatMode = 1; /* pass all passives, we're using NAT */
			break;
		case 'r':
			Use_Rdns = 1; /* look up hostnames */
			break;
		case 'R': {
			char *s, *t;

			if (!*optarg)
				usage();
			if ((s = strdup(optarg)) == NULL) {
				syslog (LOG_NOTICE,
				    "Insufficient memory (malloc failed)");
				exit(EX_UNAVAILABLE);
			}
			memset(&real_server_sa, 0, sizeof(real_server_sa));
			real_server_sa.sin_len = sizeof(struct sockaddr_in);
			real_server_sa.sin_family = AF_INET;
			t = strchr(s, ':');
			if (t == NULL)
				real_server_sa.sin_port = htons(21);
			else {
				long port = strtol(t + 1, &p, 10);

				if (*p || port <= 0 || port > 65535)
					usage();
				real_server_sa.sin_port = htons(port);
				*t = 0;
			}
			real_server_sa.sin_addr.s_addr = inet_addr(s);
			if (real_server_sa.sin_addr.s_addr == INADDR_NONE)
				usage();
			free(s);
			ReverseMode = 1;
			break;
		}
		case 'S':
			if (!inet_aton(optarg, &src_addr))
				usage();
			break;
		case 't':
			timeout_seconds = strtol(optarg, &p, 10);
			if (!*optarg || *p)
				usage();
			break;
		case 'u':
			User = optarg;
			break;
		case 'V':
			Verbose = 1;
			break;
#ifdef LIBWRAP
		case 'w':
			use_tcpwrapper = 1; /* do the libwrap thing */
			break;
#endif /* LIBWRAP */
		default:
			usage();
			/* NOTREACHED */
		}
	}
	argc -= optind;
	argv += optind;

	if (max_port < min_port)
		usage();

	openlog(__progname, LOG_NDELAY|LOG_PID, LOG_DAEMON);

	setlinebuf(stdout);
	setlinebuf(stderr);

	memset(&client_iob, 0, sizeof(client_iob));
	memset(&server_iob, 0, sizeof(server_iob));

	if (get_proxy_env(0, &real_server_sa, &client_iob.sa,
	    &proxy_sa) == -1)
		exit(EX_PROTOCOL);

	/*
	 * We may now drop root privs, as we have done our ioctl for
	 * pf. If we do drop root, we can't make backchannel connections
	 * for PORT and EPRT come from port 20, which is not strictly
	 * RFC compliant. This shouldn't cause problems for all but
	 * the stupidest ftp clients and the stupidest packet filters.
	 */
	drop_privs();

	/*
	 * We check_host after get_proxy_env so that checks are done
	 * against the original destination endpoint, not the endpoint
	 * of our side of the rdr. This allows the use of tcpwrapper
	 * rules to restrict destinations as well as sources of connections
	 * for ftp.
	 */
	if (Use_Rdns)
		flags = 0;
	else
		flags = NI_NUMERICHOST | NI_NUMERICSERV;

	i = getnameinfo((struct sockaddr *)&client_iob.sa,
	    sizeof(client_iob.sa), ClientName, sizeof(ClientName), NULL, 0,
	    flags);

	if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) {
		debuglog(2, "name resolution failure (client)");
		exit(EX_OSERR);
	}

	i = getnameinfo((struct sockaddr *)&real_server_sa,
	    sizeof(real_server_sa), RealServerName, sizeof(RealServerName),
	    NULL, 0, flags);

	if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) {
		debuglog(2, "name resolution failure (server)");
		exit(EX_OSERR);
	}

#ifdef LIBWRAP
	if (use_tcpwrapper && !check_host(&client_iob.sa, &real_server_sa))
		exit(EX_NOPERM);
#endif

	client_iob.fd = 0;

	syslog(LOG_INFO, "accepted connection from %s:%u to %s:%u", ClientName,
		ntohs(client_iob.sa.sin_port), RealServerName,
		ntohs(real_server_sa.sin_port));

	server_iob.fd = get_backchannel_socket(SOCK_STREAM, min_port, max_port,
	    -1,	1, &server_iob.sa);

	if (connect(server_iob.fd, (struct sockaddr *)&real_server_sa,
	    sizeof(real_server_sa)) != 0) {
		syslog(LOG_INFO, "cannot connect to %s:%u (%m)", RealServerName,
		    ntohs(real_server_sa.sin_port));
		exit(EX_NOHOST);
	}

	/*
	 * Now that we are connected to the real server, get the name
	 * of our end of the server socket so we know our IP address
	 * from the real server's perspective.
	 */
	salen = sizeof(server_iob.sa);
	getsockname(server_iob.fd, (struct sockaddr *)&server_iob.sa, &salen);

	i = getnameinfo((struct sockaddr *)&server_iob.sa,
	    sizeof(server_iob.sa), OurName, sizeof(OurName), NULL, 0, flags);

	if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) {
		debuglog(2, "name resolution failure (local)");
		exit(EX_OSERR);
	}

	debuglog(1, "local socket is %s:%u", OurName,
	    ntohs(server_iob.sa.sin_port));

	/* ignore SIGPIPE */
	bzero(&new_sa, sizeof(new_sa));
	new_sa.sa_handler = SIG_IGN;
	(void)sigemptyset(&new_sa.sa_mask);
	new_sa.sa_flags = SA_RESTART;
	if (sigaction(SIGPIPE, &new_sa, &old_sa) != 0) {
		syslog(LOG_ERR, "sigaction() failed (%m)");
		exit(EX_OSERR);
	}

	if (setsockopt(client_iob.fd, SOL_SOCKET, SO_OOBINLINE, (char *)&one,
	    sizeof(one)) == -1) {
		syslog(LOG_NOTICE, "cannot set SO_OOBINLINE (%m)");
		exit(EX_OSERR);
	}

	client_iob.line_buffer_size = STARTBUFSIZE;
	client_iob.line_buffer = malloc(client_iob.line_buffer_size);
	client_iob.io_buffer_size = STARTBUFSIZE;
	client_iob.io_buffer = malloc(client_iob.io_buffer_size);
	client_iob.next_byte = 0;
	client_iob.io_buffer_len = 0;
	client_iob.alive = 1;
	client_iob.who = "client";
	client_iob.send_oob_flags = 0;
	client_iob.real_sa = client_iob.sa;

	server_iob.line_buffer_size = STARTBUFSIZE;
	server_iob.line_buffer = malloc(server_iob.line_buffer_size);
	server_iob.io_buffer_size = STARTBUFSIZE;
	server_iob.io_buffer = malloc(server_iob.io_buffer_size);
	server_iob.next_byte = 0;
	server_iob.io_buffer_len = 0;
	server_iob.alive = 1;
	server_iob.who = "server";
	server_iob.send_oob_flags = MSG_OOB;
	server_iob.real_sa = real_server_sa;

	if (client_iob.line_buffer == NULL || client_iob.io_buffer == NULL ||
	    server_iob.line_buffer == NULL || server_iob.io_buffer == NULL) {
		syslog (LOG_NOTICE, "insufficient memory");
		exit(EX_UNAVAILABLE);
	}

	while (client_iob.alive || server_iob.alive) {
		int maxfd = 0;
		fd_set *fdsp;

		if (client_iob.fd > maxfd)
			maxfd = client_iob.fd;
		if (client_listen_socket > maxfd)
			maxfd = client_listen_socket;
		if (client_data_socket > maxfd)
			maxfd = client_data_socket;
		if (server_iob.fd > maxfd)
			maxfd = server_iob.fd;
		if (server_listen_socket > maxfd)
			maxfd = server_listen_socket;
		if (server_data_socket > maxfd)
			maxfd = server_data_socket;

		debuglog(3, "client is %s; server is %s",
		    client_iob.alive ? "alive" : "dead",
		    server_iob.alive ? "alive" : "dead");

		fdsp = (fd_set *)calloc(howmany(maxfd + 1, NFDBITS),
		    sizeof(fd_mask));
		if (fdsp == NULL) {
			syslog(LOG_NOTICE, "insufficient memory");
			exit(EX_UNAVAILABLE);
		}

		if (client_iob.alive && telnet_getline(&client_iob,
		    &server_iob)) {
			debuglog(3, "client line buffer is \"%s\"",
			    (char *)client_iob.line_buffer);
			if (client_iob.line_buffer[0] != '\0')
				do_client_cmd(&client_iob, &server_iob);
		} else if (server_iob.alive && telnet_getline(&server_iob,
		    &client_iob)) {
			debuglog(3, "server line buffer is \"%s\"",
			    (char *)server_iob.line_buffer);
			if (server_iob.line_buffer[0] != '\0')
				do_server_reply(&server_iob, &client_iob);
		} else {
			if (client_iob.alive) {
				FD_SET(client_iob.fd, fdsp);
				if (client_listen_socket >= 0)
					FD_SET(client_listen_socket, fdsp);
				if (client_data_socket >= 0)
					FD_SET(client_data_socket, fdsp);
			}
			if (server_iob.alive) {
				FD_SET(server_iob.fd, fdsp);
				if (server_listen_socket >= 0)
					FD_SET(server_listen_socket, fdsp);
				if (server_data_socket >= 0)
					FD_SET(server_data_socket, fdsp);
			}
			tv.tv_sec = timeout_seconds;
			tv.tv_usec = 0;

		doselect:
			sval = select(maxfd + 1, fdsp, NULL, NULL,
			    (tv.tv_sec == 0) ? NULL : &tv);
			if (sval == 0) {
				/*
				 * This proxy has timed out. Expire it
				 * quietly with an obituary in the syslogs
				 * for any passing mourners.
				 */
				syslog(LOG_INFO,
				    "timeout: no data for %ld seconds",
				    timeout_seconds);
				exit(EX_OK);
			}
			if (sval == -1) {
				if (errno == EINTR || errno == EAGAIN)
					goto doselect;
				syslog(LOG_NOTICE,
				    "select() failed (%m)");
				exit(EX_OSERR);
			}
			if (client_data_socket >= 0 &&
			    FD_ISSET(client_data_socket, fdsp)) {
				int rval;

				debuglog(3, "transfer: client to server");
				rval = xfer_data("client to server",
				    client_data_socket,
				    server_data_socket,
				    client_iob.sa.sin_addr,
				    real_server_sa.sin_addr);
				if (rval <= 0) {
					close_client_data();
					close_server_data();
					show_xfer_stats();
				} else
					client_data_bytes += rval;
			}
			if (server_data_socket >= 0 &&
			    FD_ISSET(server_data_socket, fdsp)) {
				int rval;

				debuglog(3, "transfer: server to client");
				rval = xfer_data("server to client",
				    server_data_socket,
				    client_data_socket,
				    real_server_sa.sin_addr,
				    client_iob.sa.sin_addr);
				if (rval <= 0) {
					close_client_data();
					close_server_data();
					show_xfer_stats();
				} else
					server_data_bytes += rval;
			}
			if (server_listen_socket >= 0 &&
			    FD_ISSET(server_listen_socket, fdsp)) {
				connect_port_backchannel();
			}
			if (client_listen_socket >= 0 &&
			    FD_ISSET(client_listen_socket, fdsp)) {
				connect_pasv_backchannel();
			}
			if (client_iob.alive &&
			    FD_ISSET(client_iob.fd, fdsp)) {
				client_iob.data_available = 1;
			}
			if (server_iob.alive &&
			    FD_ISSET(server_iob.fd, fdsp)) {
				server_iob.data_available = 1;
			}
		}
		free(fdsp);
		if (client_iob.got_eof) {
			shutdown(server_iob.fd, 1);
			shutdown(client_iob.fd, 0);
			client_iob.got_eof = 0;
			client_iob.alive = 0;
		}
		if (server_iob.got_eof) {
			shutdown(client_iob.fd, 1);
			shutdown(server_iob.fd, 0);
			server_iob.got_eof = 0;
			server_iob.alive = 0;
		}
	}

	if (Verbose)
		syslog(LOG_INFO, "session ended");

	exit(EX_OK);
}