path: root/share/man/man4/rum.4

.\" $OpenBSD: rum.4,v 1.26 2007/02/09 11:08:36 jmc Exp $
.\"
.\" Copyright (c) 2005-2007
.\"	Damien Bergamini <damien.bergamini@free.fr>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd February 19, 2006
.Os
.Dt RUM 4
.Sh NAME
.Nm rum
.Nd Ralink Technology USB IEEE 802.11a/b/g wireless network device
.Sh SYNOPSIS
.Cd "rum* at uhub? port ?"
.Sh DESCRIPTION
The
.Nm
driver supports USB 2.0 and PCI Express Mini Card wireless adapters based on the
Ralink RT2501USB and RT2601USB chipsets.
.Pp
Ralink PCI Express Mini Card adapters show up as normal USB 2.0 devices and are
thus handled by the
.Nm
driver.
.Pp
The RT2501USB chipset is the second generation of 802.11a/b/g adapters from
Ralink.
It consists of two integrated chips, an RT2571W MAC/BBP and an RT2528 or
RT5226 radio transceiver.
.Pp
The RT2601USB chipset consists of two integrated chips, an RT2671 MAC/BBP and
an RT2527 or RT5225 radio transceiver.
This chipset uses the MIMO (multiple-input multiple-output) technology with
multiple antennas to extend the operating range of the adapter and to achieve
higher throughput.
.Pp
These are the modes the
.Nm
driver can operate in:
.Bl -tag -width "IBSS-masterXX"
.It BSS mode
Also known as
.Em infrastructure
mode, this is used when associating with an access point, through
which all traffic passes.
This mode is the default.
.It IBSS mode
Also known as
.Em IEEE ad-hoc
mode or
.Em peer-to-peer
mode.
This is the standardized method of operating without an access point.
Stations associate with a service set.
However, actual connections between stations are peer-to-peer.
.It Host AP
In this mode the driver acts as an access point (base station)
for other cards.
.It monitor mode
In this mode the driver is able to receive packets without
associating with an access point.
This disables the internal receive filter and enables the card to
capture packets from networks which it wouldn't normally have access to,
or to scan for access points.
.El
.Pp
.Nm
supports software WEP.
Wired Equivalent Privacy (WEP) is the de facto encryption standard
for wireless networks.
It can be typically configured in one of three modes:
no encryption; 40-bit encryption; or 104-bit encryption.
Unfortunately, due to serious weaknesses in WEP protocol
it is strongly recommended that it not be used as the
sole mechanism to secure wireless communication.
WEP is not enabled by default.
.Sh CONFIGURATION
The
.Nm
driver can be configured at runtime with
.Xr ifconfig 8
or on boot with
.Xr hostname.if 5
using the following parameters:
.Bl -tag -width Ds
.It Cm bssid Ar bssid
Set the desired BSSID.
.It Fl bssid
Unset the desired BSSID.
The interface will automatically select a BSSID in this mode, which is
the default.
.It Cm chan Ar n
Set the channel (radio frequency) to be used by the driver based on
the given channel ID
.Ar n .
.It Fl chan
Unset the desired channel to be used by the driver.
The driver will automatically select a channel in this mode, which is
the default.
.It Cm media Ar media
The
.Nm
driver supports the following
.Ar media
types:
.Pp
.Bl -tag -width autoselect -compact
.It Cm autoselect
Enable autoselection of the media type and options.
.It Cm DS1
Set 802.11b DS 1Mbps operation.
.It Cm DS2
Set 802.11b DS 2Mbps operation.
.It Cm DS5
Set 802.11b DS 5.5Mbps operation.
.It Cm DS11
Set 802.11b DS 11Mbps operation.
.It Cm OFDM6
Set 802.11a/g OFDM 6Mbps operation.
.It Cm OFDM9
Set 802.11a/g OFDM 9Mbps operation.
.It Cm OFDM12
Set 802.11a/g OFDM 12Mbps operation.
.It Cm OFDM18
Set 802.11a/g OFDM 18Mbps operation.
.It Cm OFDM24
Set 802.11a/g OFDM 24Mbps operation.
.It Cm OFDM36
Set 802.11a/g OFDM 36Mbps operation.
.It Cm OFDM48
Set 802.11a/g OFDM 48Mbps operation.
.It Cm OFDM54
Set 802.11a/g OFDM 54Mbps operation.
.El
.It Cm mediaopt Ar opts
The
.Nm
driver supports the following media options:
.Pp
.Bl -tag -width monitor -compact
.It Cm hostap
Select Host AP operation.
.It Cm ibss
Select IBSS operation.
.It Cm monitor
Select monitor mode.
.El
.It Fl mediaopt Ar opts
Disable the specified media options on the driver and return it to the
default mode of operation (BSS).
.It Cm mode Ar mode
The
.Nm
driver supports the following modes:
.Pp
.Bl -tag -width 11b -compact
.It Cm 11a
Force 802.11a operation.
.It Cm 11b
Force 802.11b operation.
.It Cm 11g
Force 802.11g operation.
.El
.It Cm nwid Ar id
Set the network ID.
The
.Ar id
can either be any text string up to 32 characters in length,
or a series of hexadecimal digits up to 64 digits.
An empty
.Ar id
string allows the interface to connect to any available access points.
By default the
.Nm
driver uses an empty string.
Note that network ID is synonymous with Extended Service Set ID (ESSID).
.It Fl nwid
Set the network ID to the empty string to allow the interface to connect
to any available access point.
.It Cm nwkey Ar key
Enable WEP encryption using the specified
.Ar key .
The
.Ar key
can either be a string, a series of hexadecimal digits (preceded by
.Sq 0x ) ,
or a set of keys of the form
.Dq n:k1,k2,k3,k4 ,
where
.Sq n
specifies which of the keys will be used for transmitted packets,
and the four keys,
.Dq k1
through
.Dq k4 ,
are configured as WEP keys.
If a set of keys is specified, a comma
.Pq Sq \&,
within the key must be escaped with a backslash.
Note that if multiple keys are used, their order must be the same within
the network.
.Nm
is capable of using both 40-bit (5 characters or 10 hexadecimal digits)
or 104-bit (13 characters or 26 hexadecimal digits) keys.
.It Fl nwkey
Disable WEP encryption.
This is the default mode of operation.
.El
.Sh FILES
The following firmware file is loaded when an interface is brought up:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It /etc/firmware/rum-rt2573
.El
.Sh HARDWARE
The following adapters should work:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 3Com Aolynk WUB320g
.It Abocom WUG2700
.It Airlink101 AWLL5025
.It ASUS WL-167g ver 2
.It Belkin F5D7050 ver 3
.It Belkin F5D9050 ver 3
.It Buffalo WLI-U2-SG54HP
.It Buffalo WLI-U2-G54HP
.It CNet CWD-854 ver F
.It Conceptronic C54RU ver 2
.It Corega CG-WLUSB2GO
.It "D-Link DWL-G122 rev C1"
.It D-Link WUA-1340
.It Digitus DN-7003GR
.It Edimax EW-7318USG
.It Gigabyte GN-WB01GS
.It Gigabyte GN-WI05GS
.It Hawking HWUG1
.It Hawking HWU54DM
.It Hercules HWGUSB2-54-LB
.It Hercules HWGUSB2-54V2-AP
.It LevelOne WNC-0301USB v3
.It Linksys WUSB54G rev C
.It Linksys WUSB54GR
.It Planex GW-US54HP
.It Planex GW-US54Mini2
.It Planex GW-USMM
.It Senao NUB-3701
.It Sitecom WL-113 ver 2
.It Sitecom WL-172
.It Sweex LW053
.It TP-LINK TL-WN321G
.El
.Sh EXAMPLES
The following
.Xr hostname.if 5
example configures rum0 to join whatever network is available on boot,
using WEP key
.Dq 0x1deadbeef1 ,
channel 11, obtaining an IP address using DHCP:
.Bd -literal -offset indent
dhcp NONE NONE NONE nwkey 0x1deadbeef1 chan 11
.Ed
.Pp
The following
.Xr hostname.if 5
example creates a host-based access point on boot:
.Bd -literal -offset indent
inet 192.168.1.1 255.255.255.0 NONE media autoselect \e
	mediaopt hostap nwid my_net chan 11
.Ed
.Pp
Configure rum0 for WEP, using hex key
.Dq 0x1deadbeef1 :
.Bd -literal -offset indent
# ifconfig rum0 nwkey 0x1deadbeef1
.Ed
.Pp
Return rum0 to its default settings:
.Bd -literal -offset indent
# ifconfig rum0 -bssid -chan media autoselect \e
	nwid "" -nwkey
.Ed
.Pp
Join an existing BSS network,
.Dq my_net :
.Bd -literal -offset indent
# ifconfig rum0 192.168.1.1 netmask 0xffffff00 nwid my_net
.Ed
.Sh DIAGNOSTICS
.Bl -diag
.It "rum%d: failed loadfirmware of file %s"
For some reason, the driver was unable to read the microcode file from the
filesystem.
The file might be missing or corrupted.
.It "rum%d: could not load 8051 microcode"
An error occurred while attempting to upload the microcode to the onboard 8051
microcontroller unit.
.It "rum%d: device timeout"
A frame dispatched to the hardware for transmission did not complete in time.
The driver will reset the hardware.
This should not happen.
.El
.Sh SEE ALSO
.Xr arp 4 ,
.Xr ifmedia 4 ,
.Xr intro 4 ,
.Xr netintro 4 ,
.Xr usb 4 ,
.Xr hostname.if 5 ,
.Xr hostapd 8 ,
.Xr ifconfig 8
.Pp
Ralink Technology:
.Pa http://www.ralinktech.com.tw
.Sh HISTORY
The
.Nm
driver first appeared in
.Ox 4.0 .
.Sh AUTHORS
The
.Nm
driver was written by
.An Niall O'Higgins Aq niallo@openbsd.org
and
.An Damien Bergamini Aq damien@openbsd.org .
.Sh CAVEATS
The
.Nm
driver supports automatic control of the transmit speed in BSS mode only.
Therefore the use of a
.Nm
adapter in Host AP mode is discouraged.