blob: f77079a93bbaf3f8ce3fa0247f764ce85a2a5d39 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
/* $OpenBSD: if_aereg.h,v 1.5 1997/03/08 16:16:53 briggs Exp $ */
/* $NetBSD: if_aereg.h,v 1.14 1997/02/24 07:34:20 scottr Exp $ */
/*
* National Semiconductor DS8390 NIC register definitions.
*
* Copyright (C) 1993, David Greenman. This software may be used, modified,
* copied, distributed, and sold, in both source and binary form provided that
* the above copyright and these terms are retained. Under no circumstances is
* the author responsible for the proper functioning of this software, nor does
* the author assume any responsibility for damages incurred with its use.
*/
/*
* The following is a structure that we should be pulling from
* dev/ic/dp8390reg.h, but since we have the card in x86 mode and
* the std. include file assumes that big-endian processors will
* have the card in m68k mode, we're hosed for the moment.
* Fix this. -- XXX
*/
struct ae_ring {
u_char rsr; /* receiver status */
u_char next_packet; /* pointer to next packet */
u_short count; /* bytes in packet (length + 4) */
};
/*
* Vendor types
*/
#define AE_VENDOR_UNKNOWN 0xff /* Unknown network card */
#define AE_VENDOR_APPLE 0x00 /* Apple Ethernet card */
#define AE_VENDOR_INTERLAN 0x01 /* Interlan A310 card (GatorCard) */
#define AE_VENDOR_DAYNA 0x02 /* DaynaPORT E/30s (and others?) */
#define AE_VENDOR_ASANTE 0x03 /* Asante MacCon II/E */
#define AE_VENDOR_FARALLON 0x04 /* Farallon EtherMac II-TP */
#define AE_VENDOR_FOCUS 0x05 /* FOCUS Enhancements EtherLAN */
#define AE_VENDOR_KINETICS 0x06 /* Kinetics EtherPort SE/30 */
/*
* Compile-time config flags
*/
/*
* This sets the default for enabling/disablng the tranceiver.
*/
#define AE_FLAGS_DISABLE_TRANCEIVER 0x0001
/*
* This disables the use of double transmit buffers.
*/
#define AE_FLAGS_NO_DOUBLE_BUFFERING 0x0008
/* */
#define GC_RESET_OFFSET 0x000c0000 /* writes here reset NIC */
#define GC_ROM_OFFSET 0x000c0000 /* address prom */
#define GC_DATA_OFFSET 0x000d0000 /* Offset to NIC memory */
#define GC_REG_OFFSET 0x000e0000 /* Offset to NIC registers */
#define DP_ROM_OFFSET 0x000f0007 /* Offset to MAC address */
#define DP_DATA_OFFSET 0x00000000 /* Offset to NIC memory */
#define DP_REG_OFFSET 0x00080000 /* Offset to NIC registers */
#define AE_ROM_OFFSET 0x000f0000
#define AE_DATA_OFFSET 0x000d0000 /* Offset to NIC memory */
#define AE_REG_OFFSET 0x000e0000 /* Offset to NIC registers */
#define FE_ROM_OFFSET 0x000d0006 /* Determined empirically */
#define KE_ROM_OFFSET 0x000f0007
#define KE_DATA_OFFSET 0x00000000 /* Offset to NIC memory */
#define KE_REG_OFFSET 0x00080003 /* Offset to NIC registers */
#define AE_REG_SIZE 0x40 /* Size of register space */
|
