1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
|
/* $OpenBSD: osiopreg.h,v 1.4 2003/10/21 18:58:49 jmc Exp $ */
/* $NetBSD: osiopreg.h,v 1.1 2001/04/30 04:47:51 tsutsui Exp $ */
/*
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Van Jacobson of Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)siopreg.h 7.3 (Berkeley) 2/5/91
*/
/*
* NCR 53C710 SCSI interface hardware description.
*
* From the Mach scsi driver for the 53C710 and amiga siop driver
*/
/* byte lane definitions */
#if BYTE_ORDER == LITTLE_ENDIAN
#define BL0 0
#define BL1 1
#define BL2 2
#define BL3 3
#else
#define BL0 3
#define BL1 2
#define BL2 1
#define BL3 0
#endif
#define OSIOP_SCNTL0 (0x00+BL0) /* rw: SCSI control reg 0 */
#define OSIOP_SCNTL1 (0x00+BL1) /* rw: SCSI control reg 1 */
#define OSIOP_SDID (0x00+BL2) /* rw: SCSI destination ID */
#define OSIOP_SIEN (0x00+BL3) /* rw: SCSI interrupt enable */
#define OSIOP_SCID (0x04+BL0) /* rw: SCSI Chip ID reg */
#define OSIOP_SXFER (0x04+BL1) /* rw: SCSI Transfer reg */
#define OSIOP_SODL (0x04+BL2) /* rw: SCSI Output Data Latch */
#define OSIOP_SOCL (0x04+BL3) /* rw: SCSI Output Control Latch */
#define OSIOP_SFBR (0x08+BL0) /* ro: SCSI First Byte Received */
#define OSIOP_SIDL (0x08+BL1) /* ro: SCSI Input Data Latch */
#define OSIOP_SBDL (0x08+BL2) /* ro: SCSI Bus Data Lines */
#define OSIOP_SBCL (0x08+BL3) /* rw: SCSI Bus Control Lines */
#define OSIOP_DSTAT (0x0c+BL0) /* ro: DMA status */
#define OSIOP_SSTAT0 (0x0c+BL1) /* ro: SCSI status reg 0 */
#define OSIOP_SSTAT1 (0x0c+BL2) /* ro: SCSI status reg 1 */
#define OSIOP_SSTAT2 (0x0c+BL3) /* ro: SCSI status reg 2 */
#define OSIOP_DSA 0x10 /* rw: Data Structure Address */
#define OSIOP_CTEST0 (0x14+BL0) /* ro: Chip test register 0 */
#define OSIOP_CTEST1 (0x14+BL1) /* ro: Chip test register 1 */
#define OSIOP_CTEST2 (0x14+BL2) /* ro: Chip test register 2 */
#define OSIOP_CTEST3 (0x14+BL3) /* ro: Chip test register 3 */
#define OSIOP_CTEST4 (0x18+BL0) /* rw: Chip test register 4 */
#define OSIOP_CTEST5 (0x18+BL1) /* rw: Chip test register 5 */
#define OSIOP_CTEST6 (0x18+BL2) /* rw: Chip test register 6 */
#define OSIOP_CTEST7 (0x18+BL3) /* rw: Chip test register 7 */
#define OSIOP_TEMP 0x1c /* rw: Temporary Stack reg */
#define OSIOP_DFIFO (0x20+BL0) /* rw: DMA FIFO */
#define OSIOP_ISTAT (0x20+BL1) /* rw: Interrupt Status reg */
#define OSIOP_CTEST8 (0x20+BL2) /* rw: Chip test register 8 */
#define OSIOP_LCRC (0x20+BL3) /* rw: LCRC value */
#define OSIOP_DBC 0x24 /* rw: DMA Counter reg (longword) */
#define OSIOP_DBC0 (0x24+BL0) /* rw: DMA Byte Counter reg 0 */
#define OSIOP_DBC1 (0x24+BL1) /* rw: DMA Byte Counter reg 1 */
#define OSIOP_DBC2 (0x24+BL2) /* rw: DMA Byte Counter reg 2 */
#define OSIOP_DCMD (0x24+BL3) /* rw: DMA Command Register */
#define OSIOP_DNAD 0x28 /* rw: DMA Next Data Address */
#define OSIOP_DSP 0x2c /* rw: DMA SCRIPTS Pointer reg */
#define OSIOP_DSPS 0x30 /* rw: DMA SCRIPTS Pointer Save reg */
#define OSIOP_SCRATCH 0x34 /* rw: Scratch register */
#define OSIOP_DMODE (0x38+BL0) /* rw: DMA Mode reg */
#define OSIOP_DIEN (0x38+BL1) /* rw: DMA Interrupt Enable */
#define OSIOP_DWT (0x38+BL2) /* rw: DMA Watchdog Timer */
#define OSIOP_DCNTL (0x38+BL3) /* rw: DMA Control reg */
#define OSIOP_ADDER 0x3c /* ro: Adder Sum Output */
#define OSIOP_NREGS 0x40
/*
* Register defines
*/
/* Scsi control register 0 (scntl0) */
#define OSIOP_SCNTL0_ARB 0xc0 /* Arbitration mode */
#define OSIOP_ARB_SIMPLE 0x00
#define OSIOP_ARB_FULL 0xc0
#define OSIOP_SCNTL0_START 0x20 /* Start Sequence */
#define OSIOP_SCNTL0_WATN 0x10 /* (Select) With ATN */
#define OSIOP_SCNTL0_EPC 0x08 /* Enable Parity Checking */
#define OSIOP_SCNTL0_EPG 0x04 /* Enable Parity Generation */
#define OSIOP_SCNTL0_AAP 0x02 /* Assert ATN on Parity Error */
#define OSIOP_SCNTL0_TRG 0x01 /* Target Mode */
/* Scsi control register 1 (scntl1) */
#define OSIOP_SCNTL1_EXC 0x80 /* Extra Clock Cycle of data setup */
#define OSIOP_SCNTL1_ADB 0x40 /* Assert Data Bus */
#define OSIOP_SCNTL1_ESR 0x20 /* Enable Selection/Reselection */
#define OSIOP_SCNTL1_CON 0x10 /* Connected */
#define OSIOP_SCNTL1_RST 0x08 /* Assert RST */
#define OSIOP_SCNTL1_AESP 0x04 /* Assert even SCSI parity */
#define OSIOP_SCNTL1_PAR 0x04 /* Force bad Parity */
#define OSIOP_SCNTL1_RES0 0x02 /* Reserved */
#define OSIOP_SCNTL1_RES1 0x01 /* Reserved */
/* Scsi interrupt enable register (sien) */
#define OSIOP_SIEN_M_A 0x80 /* Phase Mismatch or ATN active */
#define OSIOP_SIEN_FCMP 0x40 /* Function Complete */
#define OSIOP_SIEN_STO 0x20 /* (Re)Selection timeout */
#define OSIOP_SIEN_SEL 0x10 /* (Re)Selected */
#define OSIOP_SIEN_SGE 0x08 /* SCSI Gross Error */
#define OSIOP_SIEN_UDC 0x04 /* Unexpected Disconnect */
#define OSIOP_SIEN_RST 0x02 /* RST asserted */
#define OSIOP_SIEN_PAR 0x01 /* Parity Error */
/* Scsi chip ID (scid) */
#define OSIOP_SCID_VALUE(i) (1 << (i))
/* Scsi transfer register (sxfer) */
#define OSIOP_SXFER_DHP 0x80 /* Disable Halt on Parity error/
ATN asserted */
#define OSIOP_SXFER_TP 0x70 /* Synch Transfer Period */
/* see specs for formulas:
Period = TCP * (4 + XFERP )
TCP = 1 + CLK + 1..2;
*/
#define OSIOP_SXFER_MO 0x0f /* Synch Max Offset */
#define OSIOP_MAX_OFFSET 8
/* Scsi output data latch register (sodl) */
/* Scsi output control latch register (socl) */
#define OSIOP_REQ 0x80 /* SCSI signal <x> asserted */
#define OSIOP_ACK 0x40
#define OSIOP_BSY 0x20
#define OSIOP_SEL 0x10
#define OSIOP_ATN 0x08
#define OSIOP_MSG 0x04
#define OSIOP_CD 0x02
#define OSIOP_IO 0x01
#define OSIOP_PHASE(x) ((x) & (OSIOP_MSG|OSIOP_CD|OSIOP_IO))
#define DATA_OUT_PHASE 0x00
#define DATA_IN_PHASE OSIOP_IO
#define COMMAND_PHASE OSIOP_CD
#define STATUS_PHASE (OSIOP_CD|OSIOP_IO)
#define MSG_OUT_PHASE (OSIOP_MSG|OSIOP_CD)
#define MSG_IN_PHASE (OSIOP_MSG|OSIOP_CD|OSIOP_IO)
/* Scsi first byte received register (sfbr) */
/* Scsi input data latch register (sidl) */
/* Scsi bus data lines register (sbdl) */
/* Scsi bus control lines register (sbcl). Same as socl */
#define OSIOP_SBCL_SSCF1 0x02 /* wo */
#define OSIOP_SBCL_SSCF0 0x01 /* wo */
/* DMA status register (dstat) */
#define OSIOP_DSTAT_DFE 0x80 /* DMA FIFO empty */
#define OSIOP_DSTAT_RES 0x40
#define OSIOP_DSTAT_BF 0x20 /* Bus fault */
#define OSIOP_DSTAT_ABRT 0x10 /* Aborted */
#define OSIOP_DSTAT_SSI 0x08 /* SCRIPT Single Step */
#define OSIOP_DSTAT_SIR 0x04 /* SCRIPT Interrupt Instruction */
#define OSIOP_DSTAT_WTD 0x02 /* Watchdog Timeout Detected */
#define OSIOP_DSTAT_IID 0x01 /* Invalid Instruction Detected */
/* Scsi status register 0 (sstat0) */
#define OSIOP_SSTAT0_M_A 0x80 /* Phase Mismatch or ATN active */
#define OSIOP_SSTAT0_FCMP 0x40 /* Function Complete */
#define OSIOP_SSTAT0_STO 0x20 /* (Re)Selection timeout */
#define OSIOP_SSTAT0_SEL 0x10 /* (Re)Selected */
#define OSIOP_SSTAT0_SGE 0x08 /* SCSI Gross Error */
#define OSIOP_SSTAT0_UDC 0x04 /* Unexpected Disconnect */
#define OSIOP_SSTAT0_RST 0x02 /* RST asserted */
#define OSIOP_SSTAT0_PAR 0x01 /* Parity Error */
/* Scsi status register 1 (sstat1) */
#define OSIOP_SSTAT1_ILF 0x80 /* Input latch (sidl) full */
#define OSIOP_SSTAT1_ORF 0x40 /* output reg (sodr) full */
#define OSIOP_SSTAT1_OLF 0x20 /* output latch (sodl) full */
#define OSIOP_SSTAT1_AIP 0x10 /* Arbitration in progress */
#define OSIOP_SSTAT1_LOA 0x08 /* Lost arbitration */
#define OSIOP_SSTAT1_WOA 0x04 /* Won arbitration */
#define OSIOP_SSTAT1_RST 0x02 /* SCSI RST current value */
#define OSIOP_SSTAT1_SDP 0x01 /* SCSI SDP current value */
/* Scsi status register 2 (sstat2) */
#define OSIOP_SSTAT2_FF 0xf0 /* SCSI FIFO flags (bytecount) */
#define OSIOP_SCSI_FIFO_DEEP 8
#define OSIOP_SSTAT2_SDP 0x08 /* Latched (on REQ) SCSI SDP */
#define OSIOP_SSTAT2_MSG 0x04 /* Latched SCSI phase */
#define OSIOP_SSTAT2_CD 0x02
#define OSIOP_SSTAT2_IO 0x01
/* Chip test register 0 (ctest0) */
#define OSIOP_CTEST0_RES0 0x80
#define OSIOP_CTEST0_BTD 0x40 /* Byte-to-byte Timer Disable */
#define OSIOP_CTEST0_GRP 0x20 /* Generate Receive Parity */
#define OSIOP_CTEST0_EAN 0x10 /* Enable Active Negation */
#define OSIOP_CTEST0_HSC 0x08 /* Halt SCSI clock */
#define OSIOP_CTEST0_ERF 0x04 /* Extend REQ/ACK Filtering */
#define OSIOP_CTEST0_RES1 0x02
#define OSIOP_CTEST0_DDIR 0x01 /* Xfer direction (1-> from SCSI bus) */
/* Chip test register 1 (ctest1) */
#define OSIOP_CTEST1_FMT 0xf0 /* Byte empty in DMA FIFO bottom
(high->byte3) */
#define OSIOP_CTEST1_FFL 0x0f /* Byte full in DMA FIFO top, same */
/* Chip test register 2 (ctest2) */
#define OSIOP_CTEST2_RES 0x80
#define OSIOP_CTEST2_SIGP 0x40 /* Signal process */
#define OSIOP_CTEST2_SOFF 0x20 /* Synch Offset compare
(1-> zero Init, max Tgt */
#define OSIOP_CTEST2_SFP 0x10 /* SCSI FIFO Parity */
#define OSIOP_CTEST2_DFP 0x08 /* DMA FIFO Parity */
#define OSIOP_CTEST2_TEOP 0x04 /* True EOP (a-la 5380) */
#define OSIOP_CTEST2_DREQ 0x02 /* DREQ status */
#define OSIOP_CTEST2_DACK 0x01 /* DACK status */
/* Chip test register 3 (ctest3) read-only, top of SCSI FIFO */
/* Chip test register 4 (ctest4) */
#define OSIOP_CTEST4_MUX 0x80 /* Host bus multiplex mode */
#define OSIOP_CTEST4_ZMOD 0x40 /* High-impedance outputs */
#define OSIOP_CTEST4_SZM 0x20 /* ditto, SCSI "outputs" */
#define OSIOP_CTEST4_SLBE 0x10 /* SCSI loopback enable */
#define OSIOP_CTEST4_SFWR 0x08 /* SCSI FIFO write enable (from sodl) */
#define OSIOP_CTEST4_FBL 0x07 /* DMA FIFO Byte Lane select
(from ctest6) 4->0, .. 7->3 */
/* Chip test register 5 (ctest5) */
#define OSIOP_CTEST5_ADCK 0x80 /* Clock Address Incrementor */
#define OSIOP_CTEST5_BBCK 0x40 /* Clock Byte counter */
#define OSIOP_CTEST5_ROFF 0x20 /* Reset SCSI offset */
#define OSIOP_CTEST5_MASR 0x10 /* Master set/reset pulses
(of bits 3-0) */
#define OSIOP_CTEST5_DDIR 0x08 /* (re)set internal DMA direction */
#define OSIOP_CTEST5_EOP 0x04 /* (re)set internal EOP */
#define OSIOP_CTEST5_DREQ 0x02 /* (re)set internal REQ */
#define OSIOP_CTEST5_DACK 0x01 /* (re)set internal ACK */
/* Chip test register 6 (ctest6) DMA FIFO access */
/* Chip test register 7 (ctest7) */
#define OSIOP_CTEST7_CDIS 0x80 /* Cache burst disable */
#define OSIOP_CTEST7_SC1 0x40 /* Snoop control 1 */
#define OSIOP_CTEST7_SC0 0x20 /* Snoop contorl 0 */
#define OSIOP_CTEST7_STD 0x10 /* Selection timeout disable */
#define OSIOP_CTEST7_DFP 0x08 /* DMA FIFO parity bit */
#define OSIOP_CTEST7_EVP 0x04 /* Even parity (to host bus) */
#define OSIOP_CTEST7_TT1 0x02 /* Transfer type bit */
#define OSIOP_CTEST7_DIFF 0x01 /* Differential mode */
/* DMA FIFO register (dfifo) */
#define OSIOP_DFIFO_FLF 0x80 /* Flush (spill) DMA FIFO */
#define OSIOP_DFIFO_BO 0x7f /* FIFO byte offset counter */
/* Interrupt status register (istat) */
#define OSIOP_ISTAT_ABRT 0x80 /* Abort operation */
#define OSIOP_ISTAT_RST 0x40 /* Software reset */
#define OSIOP_ISTAT_SIGP 0x20 /* Signal process */
#define OSIOP_ISTAT_RES 0x10
#define OSIOP_ISTAT_CON 0x08 /* Connected */
#define OSIOP_ISTAT_RES1 0x04
#define OSIOP_ISTAT_SIP 0x02 /* SCSI Interrupt pending */
#define OSIOP_ISTAT_DIP 0x01 /* DMA Interrupt pending */
/* Chip test register 8 (ctest8) */
#define OSIOP_CTEST8_V 0xf0 /* Chip revision level */
#define OSIOP_CTEST8_FLF 0x08 /* Flush DMA FIFO */
#define OSIOP_CTEST8_CLF 0x04 /* Clear DMA and SCSI FIFOs */
#define OSIOP_CTEST8_FM 0x02 /* Fetch pin mode */
#define OSIOP_CTEST8_SM 0x01 /* Snoop pins mode */
/* DMA Mode register (dmode) */
#define OSIOP_DMODE_BL_MASK 0xc0 /* DMA burst length */
#define OSIOP_DMODE_BL8 0xc0 /* 8 bytes */
#define OSIOP_DMODE_BL4 0x80 /* 4 bytes */
#define OSIOP_DMODE_BL2 0x40 /* 2 bytes */
#define OSIOP_DMODE_BL1 0x00 /* 1 byte */
#define OSIOP_DMODE_FC 0x30 /* Function code */
#define OSIOP_DMODE_PD 0x08 /* Program/data */
#define OSIOP_DMODE_FAM 0x04 /* fixed address mode */
#define OSIOP_DMODE_U0 0x02 /* User programmable transfer type */
#define OSIOP_DMODE_MAN 0x01 /* SCRIPTS in Manual start mode */
/* DMA interrupt enable register (dien) */
#define OSIOP_DIEN_RES 0xc0
#define OSIOP_DIEN_BF 0x20 /* On Bus Fault */
#define OSIOP_DIEN_ABRT 0x10 /* On Abort */
#define OSIOP_DIEN_SSI 0x08 /* On SCRIPTS sstep */
#define OSIOP_DIEN_SIR 0x04 /* On SCRIPTS intr instruction */
#define OSIOP_DIEN_WTD 0x02 /* On watchdog timeout */
#define OSIOP_DIEN_IID 0x01 /* On illegal instruction detected */
/* DMA control register (dcntl) */
#define OSIOP_DCNTL_CF_MASK 0xc0 /* Clock frequency dividers: */
#define OSIOP_DCNTL_CF_2 0x00 /* 0 --> 37.51..50.00 MHz, div=2 */
#define OSIOP_DCNTL_CF_1_5 0x40 /* 1 --> 25.01..37.50 MHz, div=1.5 */
#define OSIOP_DCNTL_CF_1 0x80 /* 2 --> 16.67..25.00 MHz, div=1 */
#define OSIOP_DCNTL_CF_3 0xc0 /* 3 --> 50.01..66.67 MHz, div=3 */
#define OSIOP_DCNTL_EA 0x20 /* Enable ACK */
#define OSIOP_DCNTL_SSM 0x10 /* Single step mode */
#define OSIOP_DCNTL_LLM 0x08 /* Enable SCSI Low-level mode */
#define OSIOP_DCNTL_STD 0x04 /* Start DMA operation */
#define OSIOP_DCNTL_FA 0x02 /* Fast arbitration */
#define OSIOP_DCNTL_COM 0x01 /* 53C700 Compatibility */
|
