path: root/sys/dev/raidframe/rf_openbsdkintf.c

/* $OpenBSD: rf_openbsdkintf.c,v 1.27 2004/11/28 02:47:14 pedro Exp $	*/
/* $NetBSD: rf_netbsdkintf.c,v 1.109 2001/07/27 03:30:07 oster Exp $	*/

/*-
 * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Greg Oster; Jason R. Thorpe.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	  This product includes software developed by the NetBSD
 *	  Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1990, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: Utah $Hdr: cd.c 1.6 90/11/28$
 *
 *	@(#)cd.c	8.2 (Berkeley) 11/16/93
 */

/*
 * Copyright (c) 1995 Carnegie-Mellon University.
 * All rights reserved.
 *
 * Authors: Mark Holland, Jim Zelenka
 *
 * Permission to use, copy, modify and distribute this software and
 * its documentation is hereby granted, provided that both the copyright
 * notice and this permission notice appear in all copies of the
 * software, derivative works or modified versions, and any portions
 * thereof, and that both notices appear in supporting documentation.
 *
 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
 * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
 *
 * Carnegie Mellon requests users of this software to return to
 *
 *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
 *  School of Computer Science
 *  Carnegie Mellon University
 *  Pittsburgh PA 15213-3890
 *
 * any improvements or extensions that they make and grant Carnegie the
 * rights to redistribute these changes.
 */

/*****************************************************************************
 *
 * rf_kintf.c -- The kernel interface routines for RAIDframe.
 *
 *****************************************************************************/

#include <sys/errno.h>

#include <sys/param.h>
#include <sys/pool.h>
#include <sys/malloc.h>
#include <sys/queue.h>
#include <sys/disk.h>
#include <sys/device.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/fcntl.h>
#include <sys/systm.h>
#include <sys/namei.h>
#include <sys/conf.h>
#include <sys/lock.h>
#include <sys/buf.h>
#include <sys/user.h>
#include <sys/reboot.h>

#include "raid.h"
#include "rf_raid.h"
#include "rf_raidframe.h"
#include "rf_copyback.h"
#include "rf_dag.h"
#include "rf_dagflags.h"
#include "rf_desc.h"
#include "rf_diskqueue.h"
#include "rf_engine.h"
#include "rf_acctrace.h"
#include "rf_etimer.h"
#include "rf_general.h"
#include "rf_debugMem.h"
#include "rf_kintf.h"
#include "rf_options.h"
#include "rf_driver.h"
#include "rf_parityscan.h"
#include "rf_debugprint.h"
#include "rf_threadstuff.h"
#include "rf_configure.h"

int	rf_kdebug_level = 0;

#ifdef	RAIDDEBUG
#define	db1_printf(a) do { if (rf_kdebug_level > 0) printf a; } while(0)
#else	/* RAIDDEBUG */
#define	db1_printf(a) (void)0
#endif	/* ! RAIDDEBUG */

static RF_Raid_t **raidPtrs;	/* Global raid device descriptors. */

RF_DECLARE_STATIC_MUTEX(rf_sparet_wait_mutex);

/* Requests to install a spare table. */
static RF_SparetWait_t *rf_sparet_wait_queue;

/* Responses from installation process. */
static RF_SparetWait_t *rf_sparet_resp_queue;

/* Prototypes. */
void rf_KernelWakeupFunc(struct buf *);
void rf_InitBP(struct buf *, struct vnode *, unsigned, dev_t, RF_SectorNum_t,
    RF_SectorCount_t, caddr_t, void (*)(struct buf *), void *, int,
    struct proc *);
void raidinit(RF_Raid_t *);

void raidattach(int);
int  raidsize(dev_t);
int  raidopen(dev_t, int, int, struct proc *);
int  raidclose(dev_t, int, int, struct proc *);
int  raidioctl(dev_t, u_long, caddr_t, int, struct proc *);
int  raidwrite(dev_t, struct uio *, int);
int  raidread(dev_t, struct uio *, int);
void raidstrategy(struct buf *);
int  raiddump(dev_t, daddr_t, caddr_t, size_t);

/*
 * Pilfered from ccd.c
 */
struct raidbuf {
	struct buf	 rf_buf;	/* New I/O buf.	 MUST BE FIRST!!! */
	struct buf	*rf_obp;	/* Ptr. to original I/O buf. */
	int		 rf_flags;	/* Miscellaneous flags. */
	RF_DiskQueueData_t *req;	/* The request that this was part of. */
};

#define	RAIDGETBUF(rs)		pool_get(&(rs)->sc_cbufpool, PR_NOWAIT)
#define	RAIDPUTBUF(rs, cbp)	pool_put(&(rs)->sc_cbufpool, cbp)

/*
 * Some port (like i386) use a swapgeneric that wants to snoop around
 * in this raid_cd structure.  It is preserved (for now) to remain
 * compatible with such practice.
 */
struct cfdriver raid_cd = {
	NULL, "raid", DV_DISK
};

/*
 * XXX Not sure if the following should be replacing the raidPtrs above,
 * or if it should be used in conjunction with that...
 */
struct raid_softc {
	int		sc_flags;		/* Flags. */
	int		sc_cflags;		/* Configuration flags. */
	size_t		sc_size;		/* Size of the raid device. */
	char		sc_xname[20];		/* XXX external name. */
	struct disk	sc_dkdev;		/* Generic disk device info. */
	struct pool	sc_cbufpool;		/* Component buffer pool. */
	struct buf	sc_q;			/* Used for the device queue. */
};

/* sc_flags */
#define	RAIDF_INITED	0x01	/* Unit has been initialized. */
#define	RAIDF_WLABEL	0x02	/* Label area is writable. */
#define	RAIDF_LABELLING	0x04	/* Unit is currently being labelled. */
#define	RAIDF_WANTED	0x40	/* Someone is waiting to obtain a lock. */
#define	RAIDF_LOCKED	0x80	/* Unit is locked. */

#define	raidunit(x)	DISKUNIT(x)
int numraid = 0;

/*
 * Here we define a cfattach structure for inserting any new raid device
 * into the device tree.  This is needed by some archs that look for
 * bootable devices in there.
 */
int  rf_probe(struct device *, void *, void *);
void rf_attach(struct device *, struct device *, void *);
int  rf_detach(struct device *, int);
int  rf_activate(struct device *, enum devact);
void rf_zeroref(struct device *);

struct cfattach raid_ca = {
	sizeof(struct raid_softc), rf_probe, rf_attach,
	rf_detach, rf_activate, rf_zeroref
};

/*
 * Allow RAIDOUTSTANDING number of simultaneous IO's to this RAID device.
 * Be aware that large numbers can allow the driver to consume a lot of
 * kernel memory, especially on writes, and in degraded mode reads.
 *
 * For example: with a stripe width of 64 blocks (32k) and 5 disks,
 * a single 64K write will typically require 64K for the old data,
 * 64K for the old parity, and 64K for the new parity, for a total
 * of 192K (if the parity buffer is not re-used immediately).
 * Even it if is used immedately, that's still 128K, which when multiplied
 * by say 10 requests, is 1280K, *on top* of the 640K of incoming data.
 *
 * Now in degraded mode, for example, a 64K read on the above setup may
 * require data reconstruction, which will require *all* of the 4 remaining
 * disks to participate -- 4 * 32K/disk == 128K again.
 */

#ifndef	RAIDOUTSTANDING
#define	RAIDOUTSTANDING		6
#endif

#define	RAIDLABELDEV(dev)						\
	(MAKEDISKDEV(major((dev)), raidunit((dev)), RAW_PART))

/* Declared here, and made public, for the benefit of KVM stuff... */
struct raid_softc  *raid_softc;
struct raid_softc **raid_scPtrs;

void rf_shutdown_hook(RF_ThreadArg_t);
void raidgetdefaultlabel(RF_Raid_t *, struct raid_softc *, struct disklabel *);
void raidgetdisklabel(dev_t);
void raidmakedisklabel(struct raid_softc *);

int  raidlock(struct raid_softc *);
void raidunlock(struct raid_softc *);

void rf_markalldirty(RF_Raid_t *);

struct device *raidrootdev;

int  findblkmajor(struct device *dv);
char *findblkname(int);

void rf_ReconThread(struct rf_recon_req *);
/* XXX what I want is: */
/*void rf_ReconThread(RF_Raid_t *raidPtr);*/
void rf_RewriteParityThread(RF_Raid_t *raidPtr);
void rf_CopybackThread(RF_Raid_t *raidPtr);
void rf_ReconstructInPlaceThread(struct rf_recon_req *);
#ifdef	RAID_AUTOCONFIG
void rf_buildroothack(void *);
int  rf_reasonable_label(RF_ComponentLabel_t *);
#endif	/* RAID_AUTOCONFIG */

RF_AutoConfig_t *rf_find_raid_components(void);
RF_ConfigSet_t *rf_create_auto_sets(RF_AutoConfig_t *);
int  rf_does_it_fit(RF_ConfigSet_t *,RF_AutoConfig_t *);
void rf_create_configuration(RF_AutoConfig_t *,RF_Config_t *,
				  RF_Raid_t *);
int  rf_set_autoconfig(RF_Raid_t *, int);
int  rf_set_rootpartition(RF_Raid_t *, int);
void rf_release_all_vps(RF_ConfigSet_t *);
void rf_cleanup_config_set(RF_ConfigSet_t *);
int  rf_have_enough_components(RF_ConfigSet_t *);
int  rf_auto_config_set(RF_ConfigSet_t *, int *);

#ifdef	RAID_AUTOCONFIG
static int raidautoconfig = 0;	/*
				 * Debugging, mostly.  Set to 0 to not
				 * allow autoconfig to take place.
				 * Note that this is overridden by having
				 * RAID_AUTOCONFIG as an option in the
				 * kernel config file.
				 */
#endif	/* RAID_AUTOCONFIG */

int
rf_probe(struct device *parent, void *match_, void *aux)
{
	return 0;
}

void
rf_attach(struct device *parent, struct device *self, void *aux)
{
	/*struct raid_softc *raid = (void *)self;*/
}

int
rf_detach(struct device *self, int flags)
{
	return 0;
}

int
rf_activate(struct device *self, enum devact act)
{
	return 0;
}

void
rf_zeroref(struct device *self)
{
}

void
raidattach(int num)
{
	int raidID;
	int i, rc;
#ifdef	RAID_AUTOCONFIG
	RF_AutoConfig_t *ac_list;	/* Autoconfig list. */
	RF_ConfigSet_t *config_sets;
#endif	/* RAID_AUTOCONFIG */

	db1_printf(("raidattach: Asked for %d units\n", num));

	if (num <= 0) {
#ifdef	DIAGNOSTIC
		panic("raidattach: count <= 0");
#endif	/* DIAGNOSTIC */
		return;
	}

	/* This is where all the initialization stuff gets done. */

	numraid = num;

	/* Make some space for requested number of units... */
	RF_Calloc(raidPtrs, num, sizeof(RF_Raid_t *), (RF_Raid_t **));
	if (raidPtrs == NULL) {
		panic("raidPtrs is NULL!!");
	}

	rc = rf_mutex_init(&rf_sparet_wait_mutex);
	if (rc) {
		RF_PANIC();
	}

	rf_sparet_wait_queue = rf_sparet_resp_queue = NULL;

	for (i = 0; i < num; i++)
		raidPtrs[i] = NULL;
	rc = rf_BootRaidframe();
	if (rc == 0)
		printf("Kernelized RAIDframe activated\n");
	else
	        panic("Serious error booting RAID !!!");
	
	/*
	 * Put together some datastructures like the CCD device does...
	 * This lets us lock the device and what-not when it gets opened.
	 */

	raid_softc = (struct raid_softc *)
		malloc(num * sizeof(struct raid_softc), M_RAIDFRAME, M_NOWAIT);
	if (raid_softc == NULL) {
		printf("WARNING: no memory for RAIDframe driver\n");
		return;
	}

	bzero(raid_softc, num * sizeof (struct raid_softc));

	raid_scPtrs = (struct raid_softc **)
		malloc(num * sizeof(struct raid_softc *), M_RAIDFRAME,
		    M_NOWAIT);
	if (raid_scPtrs == NULL) {
		printf("WARNING: no memory for RAIDframe driver\n");
		return;
	}

	bzero(raid_scPtrs, num * sizeof (struct raid_softc *));

	raidrootdev = (struct device *)malloc(num * sizeof(struct device),
	    M_RAIDFRAME, M_NOWAIT);
	if (raidrootdev == NULL) {
		panic("No memory for RAIDframe driver!!?!?!");
	}

	for (raidID = 0; raidID < num; raidID++) {
#if 0
		SIMPLEQ_INIT(&raid_softc[raidID].sc_q);
#endif

		raidrootdev[raidID].dv_class  = DV_DISK;
		raidrootdev[raidID].dv_cfdata = NULL;
		raidrootdev[raidID].dv_unit   = raidID;
		raidrootdev[raidID].dv_parent = NULL;
		raidrootdev[raidID].dv_flags  = 0;
		snprintf(raidrootdev[raidID].dv_xname,
		    sizeof raidrootdev[raidID].dv_xname,"raid%d",raidID);

		RF_Calloc(raidPtrs[raidID], 1, sizeof (RF_Raid_t),
		    (RF_Raid_t *));
		if (raidPtrs[raidID] == NULL) {
			printf("WARNING: raidPtrs[%d] is NULL\n", raidID);
			numraid = raidID;
			return;
		}
	}

	raid_cd.cd_devs = (void **) raid_scPtrs;
	raid_cd.cd_ndevs = num;

#ifdef	RAID_AUTOCONFIG
	raidautoconfig = 1;

	if (raidautoconfig) {
		/* 1. Locate all RAID components on the system. */

#ifdef	RAIDDEBUG
		printf("Searching for raid components...\n");
#endif	/* RAIDDEBUG */
		ac_list = rf_find_raid_components();

		/* 2. Sort them into their respective sets. */

		config_sets = rf_create_auto_sets(ac_list);

		/*
		 * 3. Evaluate each set and configure the valid ones
		 * This gets done in rf_buildroothack().
		 */

		/*
		 * Schedule the creation of the thread to do the
		 * "/ on RAID" stuff.
		 */

		rf_buildroothack(config_sets);

	}
#endif	/* RAID_AUTOCONFIG */

}

#ifdef	RAID_AUTOCONFIG
void
rf_buildroothack(void *arg)
{
	RF_ConfigSet_t *config_sets = arg;
	RF_ConfigSet_t *cset;
	RF_ConfigSet_t *next_cset;
	int retcode;
	int raidID;
	int rootID;
	int num_root;
	int majdev;

	rootID = 0;
	num_root = 0;
	cset = config_sets;
	while(cset != NULL ) {
		next_cset = cset->next;
		if (rf_have_enough_components(cset) &&
		    cset->ac->clabel->autoconfigure==1) {
			retcode = rf_auto_config_set(cset,&raidID);
			if (!retcode) {
				if (cset->rootable) {
					rootID = raidID;
#ifdef	RAIDDEBUG
					printf("eligible root device %d:"
					    " raid%d\n", num_root, rootID);
#endif	/* RAIDDEBUG */
					num_root++;
				}
			} else {
				/* The autoconfig didn't work :( */
#ifdef	RAIDDEBUG
				printf("Autoconfig failed with code %d for"
				    " raid%d\n", retcode, raidID);
#endif	/* RAIDDEBUG */
				rf_release_all_vps(cset);
			}
		} else {
			/*
			 * We're not autoconfiguring this set...
			 * Release the associated resources.
			 */
			rf_release_all_vps(cset);
		}
		/* Cleanup. */
		rf_cleanup_config_set(cset);
		cset = next_cset;
	}
	if (boothowto & RB_ASKNAME) {
		/* We don't auto-config... */
	} else {
		/* They didn't ask, and we found something bootable... */

		if (num_root == 1) {
			majdev = findblkmajor(&raidrootdev[rootID]);
			if (majdev < 0)
				boothowto |= RB_ASKNAME;
			else {
				rootdev = MAKEDISKDEV(majdev,rootID,0);
				boothowto |= RB_DFLTROOT;
			}
		} else if (num_root > 1) {
			/* We can't guess... Require the user to answer... */
			boothowto |= RB_ASKNAME;
		}
	}
}
#endif	/* RAID_AUTOCONFIG */

void
rf_shutdown_hook(RF_ThreadArg_t arg)
{
	int unit;
	struct raid_softc *rs;
	RF_Raid_t *raidPtr;

	/* Don't do it if we are not "safe". */
	if (boothowto & RB_NOSYNC)
		return;

	raidPtr = (RF_Raid_t *) arg;
	unit = raidPtr->raidid;
	rs = &raid_softc[unit];

	/* Shutdown the system. */

	if (rf_hook_cookies != NULL && rf_hook_cookies[unit] != NULL)
		rf_hook_cookies[unit] = NULL;

	rf_Shutdown(raidPtr);

	pool_destroy(&rs->sc_cbufpool);

	/* It's no longer initialized... */
	rs->sc_flags &= ~RAIDF_INITED;

	/* config_detach the device. */
	config_detach(device_lookup(&raid_cd, unit), 0);

	/* Detach the disk. */
	disk_detach(&rs->sc_dkdev);
}

int
raidsize(dev_t dev)
{
	struct raid_softc *rs;
	struct disklabel *lp;
	int part, unit, omask, size;

	unit = raidunit(dev);
	if (unit >= numraid)
		return (-1);
	rs = &raid_softc[unit];

	if ((rs->sc_flags & RAIDF_INITED) == 0)
		return (-1);

	part = DISKPART(dev);
	omask = rs->sc_dkdev.dk_openmask & (1 << part);
	lp = rs->sc_dkdev.dk_label;

	if (omask == 0 && raidopen(dev, 0, S_IFBLK, curproc))
		return (-1);

	if (lp->d_partitions[part].p_fstype != FS_SWAP)
		size = -1;
	else
		size = lp->d_partitions[part].p_size *
		    (lp->d_secsize / DEV_BSIZE);

	if (omask == 0 && raidclose(dev, 0, S_IFBLK, curproc))
		return (-1);

	return (size);

}

int
raiddump(dev_t dev, daddr_t blkno, caddr_t va, size_t size)
{
	/* Not implemented. */
	return (ENXIO);
}

/* ARGSUSED */
int
raidopen(dev_t dev, int flags, int fmt, struct proc *p)
{
	int unit = raidunit(dev);
	struct raid_softc *rs;
	struct disklabel *lp;
	int part,pmask;
	int error = 0;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((error = raidlock(rs)) != 0)
		return (error);
	lp = rs->sc_dkdev.dk_label;

	part = DISKPART(dev);
	pmask = (1 << part);

	db1_printf(
	    ("Opening raid device number: %d partition: %d\n", unit, part));


	if ((rs->sc_flags & RAIDF_INITED) && (rs->sc_dkdev.dk_openmask == 0))
		raidgetdisklabel(dev);

	/* Make sure that this partition exists. */

	if (part != RAW_PART) {
		db1_printf(("Not a raw partition..\n"));
		if (((rs->sc_flags & RAIDF_INITED) == 0) ||
		    ((part >= lp->d_npartitions) ||
		    (lp->d_partitions[part].p_fstype == FS_UNUSED))) {
			error = ENXIO;
			raidunlock(rs);
			db1_printf(("Bailing out...\n"));
			return (error);
		}
	}

	/* Prevent this unit from being unconfigured while opened. */
	switch (fmt) {
	case S_IFCHR:
		rs->sc_dkdev.dk_copenmask |= pmask;
		break;

	case S_IFBLK:
		rs->sc_dkdev.dk_bopenmask |= pmask;
		break;
	}

	if ((rs->sc_dkdev.dk_openmask == 0) &&
	    ((rs->sc_flags & RAIDF_INITED) != 0)) {
		/*
		 * First one...  Mark things as dirty...  Note that we *MUST*
		 * have done a configure before this.  I DO NOT WANT TO BE
		 * SCRIBBLING TO RANDOM COMPONENTS UNTIL IT'S BEEN DETERMINED
		 * THAT THEY BELONG TOGETHER!!!!!
		 */
		/*
		 * XXX should check to see if we're only open for reading
		 * here...  If so, we needn't do this, but then need some
		 * other way of keeping track of what's happened...
		 */

		rf_markalldirty( raidPtrs[unit] );
	}

	rs->sc_dkdev.dk_openmask =
	    rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask;

	raidunlock(rs);

	return (error);
}

/* ARGSUSED */
int
raidclose(dev_t dev, int flags, int fmt, struct proc *p)
{
	int unit = raidunit(dev);
	struct raid_softc *rs;
	int error = 0;
	int part;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((error = raidlock(rs)) != 0)
		return (error);

	part = DISKPART(dev);

	/* ...that much closer to allowing unconfiguration... */
	switch (fmt) {
	case S_IFCHR:
		rs->sc_dkdev.dk_copenmask &= ~(1 << part);
		break;

	case S_IFBLK:
		rs->sc_dkdev.dk_bopenmask &= ~(1 << part);
		break;
	}
	rs->sc_dkdev.dk_openmask =
	    rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask;

	if ((rs->sc_dkdev.dk_openmask == 0) &&
	    ((rs->sc_flags & RAIDF_INITED) != 0)) {
		/*
		 * Last one...  Device is not unconfigured yet.
		 * Device shutdown has taken care of setting the
		 * clean bits if RAIDF_INITED is not set.
		 * Mark things as clean...
		 */
		db1_printf(("Last one on raid%d.  Updating status.\n",unit));
		rf_update_component_labels(raidPtrs[unit],
						 RF_FINAL_COMPONENT_UPDATE);
	}

	raidunlock(rs);
	return (0);
}

void
raidstrategy(struct buf *bp)
{
	int s;

	unsigned int raidID = raidunit(bp->b_dev);
	RF_Raid_t *raidPtr;
	struct raid_softc *rs = &raid_softc[raidID];
	struct disklabel *lp;
	int wlabel;

	s = splbio();

	if ((rs->sc_flags & RAIDF_INITED) ==0) {
		bp->b_error = ENXIO;
		bp->b_flags |= B_ERROR;
		bp->b_resid = bp->b_bcount;
		biodone(bp);
  		goto raidstrategy_end;
	}
	if (raidID >= numraid || !raidPtrs[raidID]) {
		bp->b_error = ENODEV;
		bp->b_flags |= B_ERROR;
		bp->b_resid = bp->b_bcount;
		biodone(bp);
		goto raidstrategy_end;
	}
	raidPtr = raidPtrs[raidID];
	if (!raidPtr->valid) {
		bp->b_error = ENODEV;
		bp->b_flags |= B_ERROR;
		bp->b_resid = bp->b_bcount;
		biodone(bp);
		goto raidstrategy_end;
	}
	if (bp->b_bcount == 0) {
		db1_printf(("b_bcount is zero..\n"));
		biodone(bp);
		goto raidstrategy_end;
	}
	lp = rs->sc_dkdev.dk_label;

	/*
	 * Do bounds checking and adjust transfer.  If there's an
	 * error, the bounds check will flag that for us.
	 */
	wlabel = rs->sc_flags & (RAIDF_WLABEL | RAIDF_LABELLING);
	if (DISKPART(bp->b_dev) != RAW_PART)
		if (bounds_check_with_label(bp, lp, rs->sc_dkdev.dk_cpulabel,
		    wlabel) <= 0) {
			db1_printf(("Bounds check failed!!:%d %d\n",
			    (int)bp->b_blkno, (int)wlabel));
			biodone(bp);
			goto raidstrategy_end;
		}

	bp->b_resid = 0;

	bp->b_actf = rs->sc_q.b_actf;
	rs->sc_q.b_actf = bp;
	rs->sc_q.b_active++;

	raidstart(raidPtrs[raidID]);

raidstrategy_end:
	splx(s);
}

/* ARGSUSED */
int
raidread(dev_t dev, struct uio *uio, int flags)
{
	int unit = raidunit(dev);
	struct raid_softc *rs;
	int part;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((rs->sc_flags & RAIDF_INITED) == 0)
		return (ENXIO);
	part = DISKPART(dev);

	db1_printf(("raidread: unit: %d partition: %d\n", unit, part));

	return (physio(raidstrategy, NULL, dev, B_READ, minphys, uio));
}

/* ARGSUSED */
int
raidwrite(dev_t dev, struct uio *uio, int flags)
{
	int unit = raidunit(dev);
	struct raid_softc *rs;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];

	if ((rs->sc_flags & RAIDF_INITED) == 0)
		return (ENXIO);
	db1_printf(("raidwrite\n"));
	return (physio(raidstrategy, NULL, dev, B_WRITE, minphys, uio));
}

int
raidioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
{
	int unit = raidunit(dev);
	int error = 0;
	int part, pmask;
	struct raid_softc *rs;
	RF_Config_t *k_cfg, *u_cfg;
	RF_Raid_t *raidPtr;
	RF_RaidDisk_t *diskPtr;
	RF_AccTotals_t *totals;
	RF_DeviceConfig_t *d_cfg, **ucfgp;
	u_char *specific_buf;
	int retcode = 0;
	int row;
	int column;
	struct rf_recon_req *rrcopy, *rr;
	RF_ComponentLabel_t *clabel;
	RF_ComponentLabel_t ci_label;
	RF_ComponentLabel_t **clabel_ptr;
	RF_SingleComponent_t *sparePtr,*componentPtr;
	RF_SingleComponent_t hot_spare;
	RF_SingleComponent_t component;
	RF_ProgressInfo_t progressInfo, **progressInfoPtr;
	int i, j, d;

	if (unit >= numraid)
		return (ENXIO);
	rs = &raid_softc[unit];
	raidPtr = raidPtrs[unit];

	db1_printf(("raidioctl: %d %d %d %d\n", (int)dev, (int)DISKPART(dev),
	    (int)unit, (int)cmd));

	/* Must be open for writes for these commands... */
	switch (cmd) {
	case DIOCSDINFO:
	case DIOCWDINFO:
	case DIOCWLABEL:
		if ((flag & FWRITE) == 0)
			return (EBADF);
	}

	/* Must be initialized for these... */
	switch (cmd) {
	case DIOCGDINFO:
	case DIOCSDINFO:
	case DIOCWDINFO:
	case DIOCGPART:
	case DIOCWLABEL:
	case DIOCGPDINFO:
	case RAIDFRAME_SHUTDOWN:
	case RAIDFRAME_REWRITEPARITY:
	case RAIDFRAME_GET_INFO:
	case RAIDFRAME_RESET_ACCTOTALS:
	case RAIDFRAME_GET_ACCTOTALS:
	case RAIDFRAME_KEEP_ACCTOTALS:
	case RAIDFRAME_GET_SIZE:
	case RAIDFRAME_FAIL_DISK:
	case RAIDFRAME_COPYBACK:
	case RAIDFRAME_CHECK_RECON_STATUS:
	case RAIDFRAME_CHECK_RECON_STATUS_EXT:
	case RAIDFRAME_GET_COMPONENT_LABEL:
	case RAIDFRAME_SET_COMPONENT_LABEL:
	case RAIDFRAME_ADD_HOT_SPARE:
	case RAIDFRAME_REMOVE_HOT_SPARE:
	case RAIDFRAME_INIT_LABELS:
	case RAIDFRAME_REBUILD_IN_PLACE:
	case RAIDFRAME_CHECK_PARITY:
	case RAIDFRAME_CHECK_PARITYREWRITE_STATUS:
	case RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT:
	case RAIDFRAME_CHECK_COPYBACK_STATUS:
	case RAIDFRAME_CHECK_COPYBACK_STATUS_EXT:
	case RAIDFRAME_SET_AUTOCONFIG:
	case RAIDFRAME_SET_ROOT:
	case RAIDFRAME_DELETE_COMPONENT:
	case RAIDFRAME_INCORPORATE_HOT_SPARE:
		if ((rs->sc_flags & RAIDF_INITED) == 0)
			return (ENXIO);
	}

	switch (cmd) {
		/* Configure the system. */
	case RAIDFRAME_CONFIGURE:

		if (raidPtr->valid) {
			/* There is a valid RAID set running on this unit ! */
			printf("raid%d: Device already configured!\n",unit);
			return(EINVAL);
		}

		/*
		 * Copy-in the configuration information.
		 * data points to a pointer to the configuration structure.
		 */
		u_cfg = *((RF_Config_t **)data);
		RF_Malloc(k_cfg, sizeof (RF_Config_t), (RF_Config_t *));
		if (k_cfg == NULL) {
			return (ENOMEM);
		}
		retcode = copyin((caddr_t)u_cfg, (caddr_t)k_cfg,
		    sizeof (RF_Config_t));
		if (retcode) {
			RF_Free(k_cfg, sizeof(RF_Config_t));
			return (retcode);
		}

		/*
		 * Allocate a buffer for the layout-specific data,
		 * and copy it in.
		 */
		if (k_cfg->layoutSpecificSize) {
			if (k_cfg->layoutSpecificSize > 10000) {
				/* Sanity check. */
				RF_Free(k_cfg, sizeof(RF_Config_t));
				return (EINVAL);
			}
			RF_Malloc(specific_buf, k_cfg->layoutSpecificSize,
			    (u_char *));
			if (specific_buf == NULL) {
				RF_Free(k_cfg, sizeof (RF_Config_t));
				return (ENOMEM);
			}
			retcode = copyin(k_cfg->layoutSpecific,
			    (caddr_t)specific_buf, k_cfg->layoutSpecificSize);
			if (retcode) {
				RF_Free(k_cfg, sizeof(RF_Config_t));
				RF_Free(specific_buf,
					k_cfg->layoutSpecificSize);
				return (retcode);
			}
		} else
			specific_buf = NULL;
		k_cfg->layoutSpecific = specific_buf;

		/*
		 * We should do some kind of sanity check on the
		 * configuration.
		 * Store the sum of all the bytes in the last byte ?
		 */

		/*
		 * Clear the entire RAID descriptor, just to make sure
		 *  there is no stale data left in the case of a
		 *  reconfiguration.
		 */
		bzero((char *) raidPtr, sizeof(RF_Raid_t));

		/* Configure the system. */
		raidPtr->raidid = unit;

		retcode = rf_Configure(raidPtr, k_cfg, NULL);

		if (retcode == 0) {

			/*
			 * Allow this many simultaneous IO's to
			 * this RAID device.
			 */
			raidPtr->openings = RAIDOUTSTANDING;

			raidinit(raidPtr);
			rf_markalldirty(raidPtr);
		}

		/* Free the buffers.  No return code here. */
		if (k_cfg->layoutSpecificSize) {
			RF_Free(specific_buf, k_cfg->layoutSpecificSize);
		}
		RF_Free(k_cfg, sizeof (RF_Config_t));

		return (retcode);

	case RAIDFRAME_SHUTDOWN:
		/* Shutdown the system. */

		if ((error = raidlock(rs)) != 0)
			return (error);

		/*
		 * If somebody has a partition mounted, we shouldn't
		 * shutdown.
		 */

		part = DISKPART(dev);
		pmask = (1 << part);
		if ((rs->sc_dkdev.dk_openmask & ~pmask) ||
		    ((rs->sc_dkdev.dk_bopenmask & pmask) &&
		    (rs->sc_dkdev.dk_copenmask & pmask))) {
			raidunlock(rs);
			return (EBUSY);
		}

		if ((retcode = rf_Shutdown(raidPtr)) == 0) {

			pool_destroy(&rs->sc_cbufpool);

			/* It's no longer initialized... */
			rs->sc_flags &= ~RAIDF_INITED;

			/* config_detach the device. */
			config_detach(device_lookup(&raid_cd, unit), 0);

			/* Detach the disk. */
			disk_detach(&rs->sc_dkdev);
		}

		raidunlock(rs);

		return (retcode);

	case RAIDFRAME_GET_COMPONENT_LABEL:
		clabel_ptr = (RF_ComponentLabel_t **) data;
		/*
		 * We need to read the component label for the disk indicated
		 * by row,column in clabel.
		 */

		/*
		 * For practice, let's get it directly from disk, rather
		 * than from the in-core copy.
		 */
		RF_Malloc( clabel, sizeof( RF_ComponentLabel_t ),
			   (RF_ComponentLabel_t *));
		if (clabel == NULL)
			return (ENOMEM);

		bzero((char *) clabel, sizeof(RF_ComponentLabel_t));

		retcode = copyin( *clabel_ptr, clabel,
				  sizeof(RF_ComponentLabel_t));

		if (retcode) {
			RF_Free( clabel, sizeof(RF_ComponentLabel_t));
			return(retcode);
		}

 		row = clabel->row;
		column = clabel->column;

		if ((row < 0) || (row >= raidPtr->numRow) ||
		    (column < 0) || (column >= raidPtr->numCol)) {
			return(EINVAL);
  		}

		raidread_component_label(raidPtr->Disks[row][column].dev,
		    raidPtr->raid_cinfo[row][column].ci_vp, clabel );

		retcode = copyout((caddr_t) clabel,
				  (caddr_t) *clabel_ptr,
				  sizeof(RF_ComponentLabel_t));
		RF_Free( clabel, sizeof(RF_ComponentLabel_t));
		return (retcode);

	case RAIDFRAME_SET_COMPONENT_LABEL:
		clabel = (RF_ComponentLabel_t *) data;

		/* XXX check the label for valid stuff... */
		/*
		 * Note that some things *should not* get modified --
		 * the user should be re-initing the labels instead of
		 * trying to patch things.
		 */

#ifdef	RAIDDEBUG
		printf("Got component label:\n");
		printf("Version: %d\n",clabel->version);
		printf("Serial Number: %d\n",clabel->serial_number);
		printf("Mod counter: %d\n",clabel->mod_counter);
		printf("Row: %d\n", clabel->row);
		printf("Column: %d\n", clabel->column);
		printf("Num Rows: %d\n", clabel->num_rows);
		printf("Num Columns: %d\n", clabel->num_columns);
		printf("Clean: %d\n", clabel->clean);
		printf("Status: %d\n", clabel->status);
#endif	/* RAIDDEBUG */

		row = clabel->row;
		column = clabel->column;

		if ((row < 0) || (row >= raidPtr->numRow) ||
		    (column < 0) || (column >= raidPtr->numCol)) {
			RF_Free( clabel, sizeof(RF_ComponentLabel_t));
			return(EINVAL);
		}

 		/* XXX this isn't allowed to do anything for now :-) */
#if 0
		raidwrite_component_label(raidPtr->Disks[row][column].dev,
		    raidPtr->raid_cinfo[row][column].ci_vp, clabel );
#endif
		return (0);

	case RAIDFRAME_INIT_LABELS:
		clabel = (RF_ComponentLabel_t *) data;
		/*
		 * We only want the serial number from the above.
		 * We get all the rest of the information from
		 * the config that was used to create this RAID
		 * set.
		 */

		raidPtr->serial_number = clabel->serial_number;

		raid_init_component_label(raidPtr, &ci_label);
		ci_label.serial_number = clabel->serial_number;

		for(row=0;row<raidPtr->numRow;row++) {
			ci_label.row = row;
			for(column=0;column<raidPtr->numCol;column++) {
				diskPtr = &raidPtr->Disks[row][column];
				if (!RF_DEAD_DISK(diskPtr->status)) {
					ci_label.partitionSize =
					    diskPtr->partitionSize;
					ci_label.column = column;
					raidwrite_component_label(
					    raidPtr->Disks[row][column].dev,
					    raidPtr->raid_cinfo[row][column].ci_vp,
					    &ci_label );
				}
			}
		}

		return (retcode);

	case RAIDFRAME_REWRITEPARITY:

		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* Parity for RAID 0 is trivially correct. */
			raidPtr->parity_good = RF_RAID_CLEAN;
			return(0);
		}


		if (raidPtr->parity_rewrite_in_progress == 1) {
			/* Re-write is already in progress ! */
			return(EINVAL);
		}

		retcode = RF_CREATE_THREAD(raidPtr->parity_rewrite_thread,
					   rf_RewriteParityThread,
					   raidPtr,"raid_parity");

		return (retcode);

	case RAIDFRAME_SET_AUTOCONFIG:
		d = rf_set_autoconfig(raidPtr, *(int *) data);
		db1_printf(("New autoconfig value is: %d\n", d));
		*(int *) data = d;
		return (retcode);

	case RAIDFRAME_SET_ROOT:
		d = rf_set_rootpartition(raidPtr, *(int *) data);
		db1_printf(("New rootpartition value is: %d\n", d));
		*(int *) data = d;
		return (retcode);


	case RAIDFRAME_ADD_HOT_SPARE:
		sparePtr = (RF_SingleComponent_t *) data;
		memcpy( &hot_spare, sparePtr, sizeof(RF_SingleComponent_t));
		retcode = rf_add_hot_spare(raidPtr, &hot_spare);
		return(retcode);

	case RAIDFRAME_REMOVE_HOT_SPARE:
		return(retcode);

	case RAIDFRAME_DELETE_COMPONENT:
		componentPtr = (RF_SingleComponent_t *)data;
		memcpy( &component, componentPtr,
			sizeof(RF_SingleComponent_t));
		retcode = rf_delete_component(raidPtr, &component);
		return(retcode);

	case RAIDFRAME_INCORPORATE_HOT_SPARE:
		componentPtr = (RF_SingleComponent_t *)data;
		memcpy( &component, componentPtr,
			sizeof(RF_SingleComponent_t));
		retcode = rf_incorporate_hot_spare(raidPtr, &component);
		return(retcode);

	case RAIDFRAME_REBUILD_IN_PLACE:

		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* Can't do this on a RAID 0 !! */
			return(EINVAL);
		}

		if (raidPtr->recon_in_progress == 1) {
			/* A reconstruct is already in progress ! */
			return(EINVAL);
		}

		componentPtr = (RF_SingleComponent_t *) data;
		memcpy( &component, componentPtr,
			sizeof(RF_SingleComponent_t));
		row = component.row;
		column = component.column;
		db1_printf(("Rebuild: %d %d\n",row, column));
		if ((row < 0) || (row >= raidPtr->numRow) ||
		    (column < 0) || (column >= raidPtr->numCol)) {
			return(EINVAL);
		}

		RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *));
		if (rrcopy == NULL)
			return(ENOMEM);

		rrcopy->raidPtr = (void *) raidPtr;
		rrcopy->row = row;
		rrcopy->col = column;

		retcode = RF_CREATE_THREAD(raidPtr->recon_thread,
					   rf_ReconstructInPlaceThread,
					   rrcopy,"raid_reconip");

		return (retcode);

	case RAIDFRAME_GET_INFO:
		if (!raidPtr->valid)
			return (ENODEV);
		ucfgp = (RF_DeviceConfig_t **) data;
		RF_Malloc(d_cfg, sizeof(RF_DeviceConfig_t),
			  (RF_DeviceConfig_t *));
		if (d_cfg == NULL)
			return (ENOMEM);
		bzero((char *) d_cfg, sizeof(RF_DeviceConfig_t));
		d_cfg->rows = raidPtr->numRow;
		d_cfg->cols = raidPtr->numCol;
		d_cfg->ndevs = raidPtr->numRow * raidPtr->numCol;
		if (d_cfg->ndevs >= RF_MAX_DISKS) {
			RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));
			return (ENOMEM);
		}
		d_cfg->nspares = raidPtr->numSpare;
		if (d_cfg->nspares >= RF_MAX_DISKS) {
			RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));
			return (ENOMEM);
		}
		d_cfg->maxqdepth = raidPtr->maxQueueDepth;
		d = 0;
		for (i = 0; i < d_cfg->rows; i++) {
			for (j = 0; j < d_cfg->cols; j++) {
				d_cfg->devs[d] = raidPtr->Disks[i][j];
				d++;
			}
		}
		for (j = d_cfg->cols, i = 0; i < d_cfg->nspares; i++, j++) {
			d_cfg->spares[i] = raidPtr->Disks[0][j];
		}
		retcode = copyout((caddr_t) d_cfg, (caddr_t) * ucfgp,
				  sizeof(RF_DeviceConfig_t));
		RF_Free(d_cfg, sizeof(RF_DeviceConfig_t));

		return (retcode);

	case RAIDFRAME_CHECK_PARITY:
		*(int *) data = raidPtr->parity_good;
		return (0);

	case RAIDFRAME_RESET_ACCTOTALS:
		bzero(&raidPtr->acc_totals, sizeof(raidPtr->acc_totals));
		return (0);

  	case RAIDFRAME_GET_ACCTOTALS:
		totals = (RF_AccTotals_t *) data;
		*totals = raidPtr->acc_totals;
		return (0);

	case RAIDFRAME_KEEP_ACCTOTALS:
		raidPtr->keep_acc_totals = *(int *)data;
		return (0);

	case RAIDFRAME_GET_SIZE:
		*(int *) data = raidPtr->totalSectors;
		return (0);

	/* Fail a disk & optionally start reconstruction. */
	case RAIDFRAME_FAIL_DISK:
		rr = (struct rf_recon_req *)data;

		if (rr->row < 0 || rr->row >= raidPtr->numRow ||
		    rr->col < 0 || rr->col >= raidPtr->numCol)
			return (EINVAL);

		db1_printf(("raid%d: Failing the disk: row: %d col: %d\n",
		    unit, rr->row, rr->col));

		/*
		 * Make a copy of the recon request so that we don't
		 * rely on the user's buffer.
		 */
		RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *));
		if (rrcopy == NULL)
			return(ENOMEM);
		bcopy(rr, rrcopy, sizeof(*rr));
		rrcopy->raidPtr = (void *)raidPtr;

		retcode = RF_CREATE_THREAD(raidPtr->recon_thread,
					   rf_ReconThread,
					   rrcopy,"raid_recon");
		return (0);

	/*
	 * Invoke a copyback operation after recon on whatever
	 * disk needs it, if any.
	 */
	case RAIDFRAME_COPYBACK:
		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* This makes no sense on a RAID 0 !! */
			return(EINVAL);
		}

		if (raidPtr->copyback_in_progress == 1) {
			/* Copyback is already in progress ! */
			return(EINVAL);
		}

		retcode = RF_CREATE_THREAD(raidPtr->copyback_thread,
					   rf_CopybackThread,
					   raidPtr,"raid_copyback");
		return (retcode);

	/* Return the percentage completion of reconstruction. */
	case RAIDFRAME_CHECK_RECON_STATUS:
		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/*
			 * This makes no sense on a RAID 0, so tell the
			 * user it's done.
			 */
			*(int *) data = 100;
			return(0);
		}
		row = 0; /* XXX we only consider a single row... */
		if (raidPtr->status[row] != rf_rs_reconstructing)
			*(int *)data = 100;
		else
			*(int *)data =
			    raidPtr->reconControl[row]->percentComplete;
		return (0);

	case RAIDFRAME_CHECK_RECON_STATUS_EXT:
		progressInfoPtr = (RF_ProgressInfo_t **) data;
		row = 0; /* XXX we only consider a single row... */
		if (raidPtr->status[row] != rf_rs_reconstructing) {
			progressInfo.remaining = 0;
			progressInfo.completed = 100;
			progressInfo.total = 100;
		} else {
			progressInfo.total =
				raidPtr->reconControl[row]->numRUsTotal;
			progressInfo.completed =
				raidPtr->reconControl[row]->numRUsComplete;
			progressInfo.remaining = progressInfo.total -
				progressInfo.completed;
		}
		retcode = copyout((caddr_t) &progressInfo,
				  (caddr_t) *progressInfoPtr,
				  sizeof(RF_ProgressInfo_t));
		return (retcode);

	case RAIDFRAME_CHECK_PARITYREWRITE_STATUS:
		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/*
			 * This makes no sense on a RAID 0, so tell the
			 * user it's done.
			 */
			*(int *) data = 100;
			return(0);
		}
		if (raidPtr->parity_rewrite_in_progress == 1) {
			*(int *) data = 100 *
				raidPtr->parity_rewrite_stripes_done /
				raidPtr->Layout.numStripe;
		} else {
			*(int *) data = 100;
		}
		return (0);

	case RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT:
		progressInfoPtr = (RF_ProgressInfo_t **) data;
		if (raidPtr->parity_rewrite_in_progress == 1) {
			progressInfo.total = raidPtr->Layout.numStripe;
			progressInfo.completed =
				raidPtr->parity_rewrite_stripes_done;
			progressInfo.remaining = progressInfo.total -
				progressInfo.completed;
		} else {
			progressInfo.remaining = 0;
			progressInfo.completed = 100;
			progressInfo.total = 100;
		}
		retcode = copyout((caddr_t) &progressInfo,
				  (caddr_t) *progressInfoPtr,
				  sizeof(RF_ProgressInfo_t));
		return (retcode);

	case RAIDFRAME_CHECK_COPYBACK_STATUS:
		if (raidPtr->Layout.map->faultsTolerated == 0) {
			/* This makes no sense on a RAID 0 !! */
			*(int *) data = 100;
			return(0);
		}
		if (raidPtr->copyback_in_progress == 1) {
			*(int *) data = 100 * raidPtr->copyback_stripes_done /
				raidPtr->Layout.numStripe;
		} else {
			*(int *) data = 100;
		}
		return (0);

	case RAIDFRAME_CHECK_COPYBACK_STATUS_EXT:
		progressInfoPtr = (RF_ProgressInfo_t **) data;
		if (raidPtr->copyback_in_progress == 1) {
			progressInfo.total = raidPtr->Layout.numStripe;
			progressInfo.completed =
				raidPtr->copyback_stripes_done;
			progressInfo.remaining = progressInfo.total -
				progressInfo.completed;
		} else {
			progressInfo.remaining = 0;
			progressInfo.completed = 100;
			progressInfo.total = 100;
		}
		retcode = copyout((caddr_t) &progressInfo,
				  (caddr_t) *progressInfoPtr,
				  sizeof(RF_ProgressInfo_t));
		return (retcode);

#if 0
	case RAIDFRAME_SPARET_WAIT:
		/*
		 * The sparetable daemon calls this to wait for the
		 * kernel to need a spare table.
		 * This ioctl does not return until a spare table is needed.
		 * XXX -- Calling mpsleep here in the ioctl code is almost
		 * certainly wrong and evil. -- XXX
		 * XXX -- I should either compute the spare table in the
		 * kernel, or have a different. -- XXX
		 * XXX -- Interface (a different character device) for
		 * delivering the table. -- XXX
		 */
		RF_LOCK_MUTEX(rf_sparet_wait_mutex);
		while (!rf_sparet_wait_queue)
			mpsleep(&rf_sparet_wait_queue, (PZERO + 1) | PCATCH,
			    "sparet wait", 0,
			    (void *)simple_lock_addr(rf_sparet_wait_mutex),
			    MS_LOCK_SIMPLE);
		waitreq = rf_sparet_wait_queue;
		rf_sparet_wait_queue = rf_sparet_wait_queue->next;
		RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);

		*((RF_SparetWait_t *)data) = *waitreq;

		RF_Free(waitreq, sizeof *waitreq);
		return (0);

	case RAIDFRAME_ABORT_SPARET_WAIT:
		/*
		 * Wakes up a process waiting on SPARET_WAIT and puts an
		 * error code in it that will cause the dameon to exit.
		 */
		RF_Malloc(waitreq, sizeof (*waitreq), (RF_SparetWait_t *));
		waitreq->fcol = -1;
		RF_LOCK_MUTEX(rf_sparet_wait_mutex);
		waitreq->next = rf_sparet_wait_queue;
		rf_sparet_wait_queue = waitreq;
		RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);
		wakeup(&rf_sparet_wait_queue);
		return (0);

	case RAIDFRAME_SEND_SPARET:
		/*
		 * Used by the spare table daemon to deliver a spare table
		 * into the kernel.
		 */

		/* Install the spare table. */
		retcode = rf_SetSpareTable(raidPtr,*(void **)data);

		/*
		 * Respond to the requestor.  The return status of the
		 * spare table installation is passed in the "fcol" field.
		 */
		RF_Malloc(waitreq, sizeof *waitreq, (RF_SparetWait_t *));
		waitreq->fcol = retcode;
		RF_LOCK_MUTEX(rf_sparet_wait_mutex);
		waitreq->next = rf_sparet_resp_queue;
		rf_sparet_resp_queue = waitreq;
		wakeup(&rf_sparet_resp_queue);
		RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);

		return (retcode);
#endif
	/* Fall through to the os-specific code below. */
	default:
		break;
	}

	if (!raidPtr->valid)
		return (EINVAL);

	/*
	 * Add support for "regular" device ioctls here.
	 */
	switch (cmd) {
	case DIOCGDINFO:
		*(struct disklabel *)data = *(rs->sc_dkdev.dk_label);
		break;

	case DIOCGPART:
		((struct partinfo *)data)->disklab = rs->sc_dkdev.dk_label;
		((struct partinfo *)data)->part =
		    &rs->sc_dkdev.dk_label->d_partitions[DISKPART(dev)];
		break;

	case DIOCWDINFO:
	case DIOCSDINFO:
	{
		struct disklabel *lp;
		lp = (struct disklabel *)data;

		if ((error = raidlock(rs)) != 0)
			return (error);

		rs->sc_flags |= RAIDF_LABELLING;

		error = setdisklabel(rs->sc_dkdev.dk_label,
		    lp, 0, rs->sc_dkdev.dk_cpulabel);
		if (error == 0) {
			if (cmd == DIOCWDINFO)
				error = writedisklabel(RAIDLABELDEV(dev),
				    raidstrategy, rs->sc_dkdev.dk_label,
				    rs->sc_dkdev.dk_cpulabel);
		}

		rs->sc_flags &= ~RAIDF_LABELLING;

		raidunlock(rs);

		if (error)
			return (error);
		break;
	}

	case DIOCWLABEL:
		if (*(int *)data != 0)
			rs->sc_flags |= RAIDF_WLABEL;
		else
			rs->sc_flags &= ~RAIDF_WLABEL;
		break;

	case DIOCGPDINFO:
  		raidgetdefaultlabel(raidPtr, rs, (struct disklabel *) data);
  		break;

	default:
		retcode = ENOTTY;
	}

	return (retcode);
}

/*
 * raidinit -- Complete the rest of the initialization for the
 * RAIDframe device.
 */
void
raidinit(RF_Raid_t *raidPtr)
{
	struct raid_softc *rs;
	struct cfdata	*cf;
	int unit;

	unit = raidPtr->raidid;

	rs = &raid_softc[unit];
	pool_init(&rs->sc_cbufpool, sizeof(struct raidbuf), 0,
		0, 0, "raidpl", NULL);

	/* XXX should check return code first... */
	rs->sc_flags |= RAIDF_INITED;

	/* XXX doesn't check bounds. */
	snprintf(rs->sc_xname, sizeof rs->sc_xname, "raid%d", unit);

	rs->sc_dkdev.dk_name = rs->sc_xname;

	/*
	 * disk_attach actually creates space for the CPU disklabel, among
	 * other things, so it's critical to call this *BEFORE* we try
	 * putzing with disklabels.
	 */
	disk_attach(&rs->sc_dkdev);

	/*
	 * XXX There may be a weird interaction here between this, and
	 * protectedSectors, as used in RAIDframe.
	 */
	rs->sc_size = raidPtr->totalSectors;

	/*
	 * config_attach the raid device into the device tree.
	 * For autoconf rootdev selection...
	 */
	cf = malloc(sizeof(struct cfdata), M_RAIDFRAME, M_NOWAIT);
	if (cf == NULL) {
		printf("WARNING: no memory for cfdata struct\n");
		return;
	}
	bzero(cf, sizeof(struct cfdata));

	cf->cf_attach = &raid_ca;
	cf->cf_driver = &raid_cd;
	cf->cf_unit   = unit;

	config_attach(NULL, cf, NULL, NULL);
}

/*
 * Wake up the daemon & tell it to get us a spare table.
 * XXX
 * The entries in the queues should be tagged with the raidPtr so that
 * in the extremely rare case that two recons happen at once, we know
 * which devices were requesting a spare table.
 * XXX
 *
 * XXX This code is not currently used. GO
 */
int
rf_GetSpareTableFromDaemon(RF_SparetWait_t *req)
{
	int retcode;

	RF_LOCK_MUTEX(rf_sparet_wait_mutex);
	req->next = rf_sparet_wait_queue;
	rf_sparet_wait_queue = req;
	wakeup(&rf_sparet_wait_queue);

	/* mpsleep unlocks the mutex. */
	while (!rf_sparet_resp_queue) {
		tsleep(&rf_sparet_resp_queue, PRIBIO,
		    "RAIDframe getsparetable", 0);
	}
	req = rf_sparet_resp_queue;
	rf_sparet_resp_queue = req->next;
	RF_UNLOCK_MUTEX(rf_sparet_wait_mutex);

	retcode = req->fcol;
	/* This is not the same req as we alloc'd. */
	RF_Free(req, sizeof *req);
	return (retcode);
}

/*
 * A wrapper around rf_DoAccess that extracts appropriate info from the
 * bp and passes it down.
 * Any calls originating in the kernel must use non-blocking I/O.
 * Do some extra sanity checking to return "appropriate" error values for
 * certain conditions (to make some standard utilities work).
 *
 * Formerly known as: rf_DoAccessKernel
 */
void
raidstart(RF_Raid_t *raidPtr)
{
	RF_SectorCount_t num_blocks, pb, sum;
	RF_RaidAddr_t raid_addr;
	int retcode;
	struct partition *pp;
	daddr_t blocknum;
	int unit;
	struct raid_softc *rs;
	int	do_async;
	struct buf *bp;

	unit = raidPtr->raidid;
	rs = &raid_softc[unit];

	/* Quick check to see if anything has died recently. */
	RF_LOCK_MUTEX(raidPtr->mutex);
	if (raidPtr->numNewFailures > 0) {
		rf_update_component_labels(raidPtr,
					   RF_NORMAL_COMPONENT_UPDATE);
		raidPtr->numNewFailures--;
	}
	RF_UNLOCK_MUTEX(raidPtr->mutex);

	/* Check to see if we're at the limit... */
	RF_LOCK_MUTEX(raidPtr->mutex);
	while (raidPtr->openings > 0) {
		RF_UNLOCK_MUTEX(raidPtr->mutex);

		bp = rs->sc_q.b_actf;
		if (bp == NULL) {
			/* Nothing more to do. */
			return;
		}
		rs->sc_q.b_actf = bp->b_actf;

		/*
		 * Ok, for the bp we have here, bp->b_blkno is relative to the
		 * partition... We need to make it absolute to the underlying
		 * device...
		 */

		blocknum = bp->b_blkno;
		if (DISKPART(bp->b_dev) != RAW_PART) {
			pp = &rs->sc_dkdev.dk_label->d_partitions[DISKPART(bp->b_dev)];
			blocknum += pp->p_offset;
		}

		db1_printf(("Blocks: %d, %d\n", (int) bp->b_blkno,
			    (int) blocknum));

		db1_printf(("bp->b_bcount = %d\n", (int) bp->b_bcount));
		db1_printf(("bp->b_resid = %d\n", (int) bp->b_resid));

		/*
		 * *THIS* is where we adjust what block we're going to...
		 * But DO NOT TOUCH bp->b_blkno !!!
		 */
		raid_addr = blocknum;

		num_blocks = bp->b_bcount >> raidPtr->logBytesPerSector;
		pb = (bp->b_bcount & raidPtr->sectorMask) ? 1 : 0;
		sum = raid_addr + num_blocks + pb;
		if (1 || rf_debugKernelAccess) {
			db1_printf(("raid_addr=%d sum=%d num_blocks=%d(+%d)"
			    " (%d)\n", (int)raid_addr, (int)sum,
			    (int)num_blocks, (int)pb, (int)bp->b_resid));
		}
		if ((sum > raidPtr->totalSectors) || (sum < raid_addr)
		    || (sum < num_blocks) || (sum < pb)) {
			bp->b_error = ENOSPC;
			bp->b_flags |= B_ERROR;
			bp->b_resid = bp->b_bcount;
			/* db1_printf(("%s: Calling biodone on 0x%x\n",
			    __func__, bp)); */
			splassert(IPL_BIO);
			biodone(bp);
			RF_LOCK_MUTEX(raidPtr->mutex);
			continue;
		}
		/*
		 * XXX rf_DoAccess() should do this, not just DoAccessKernel().
		 */

		if (bp->b_bcount & raidPtr->sectorMask) {
			bp->b_error = EINVAL;
			bp->b_flags |= B_ERROR;
			bp->b_resid = bp->b_bcount;
			/* db1_printf(("%s: Calling biodone on 0x%x\n",
			    __func__, bp)); */
			splassert(IPL_BIO);
			biodone(bp);
			RF_LOCK_MUTEX(raidPtr->mutex);
			continue;

		}
		db1_printf(("Calling DoAccess..\n"));


		RF_LOCK_MUTEX(raidPtr->mutex);
		raidPtr->openings--;
		RF_UNLOCK_MUTEX(raidPtr->mutex);

		/*
		 * Everything is async.
		 */
		do_async = 1;

		disk_busy(&rs->sc_dkdev);

		/*
		 * XXX we're still at splbio() here...  Do we *really*
		 * need to be ?
		 */

		/*
		 * Don't ever condition on bp->b_flags & B_WRITE.
		 * Always condition on B_READ instead.
		 */

		retcode = rf_DoAccess(raidPtr, (bp->b_flags & B_READ) ?
				      RF_IO_TYPE_READ : RF_IO_TYPE_WRITE,
				      do_async, raid_addr, num_blocks,
				      bp->b_data, bp, NULL, NULL,
				      RF_DAG_NONBLOCKING_IO, NULL, NULL, NULL);

		RF_LOCK_MUTEX(raidPtr->mutex);
	}
	RF_UNLOCK_MUTEX(raidPtr->mutex);
}

/* Invoke an I/O from kernel mode.  Disk queue should be locked upon entry. */

int
rf_DispatchKernelIO(RF_DiskQueue_t *queue, RF_DiskQueueData_t *req)
{
	int op = (req->type == RF_IO_TYPE_READ) ? B_READ : B_WRITE;
	struct buf *bp;
	struct raidbuf *raidbp = NULL;
	struct raid_softc *rs;
	int unit;
	/*int s = splbio();*/	/* Want to test this. */

	/*
	 * XXX along with the vnode, we also need the softc associated with
	 * this device...
	 */
	req->queue = queue;

	unit = queue->raidPtr->raidid;

	db1_printf(("DispatchKernelIO unit: %d\n", unit));

	if (unit >= numraid) {
		printf("Invalid unit number: %d %d\n", unit, numraid);
		panic("Invalid Unit number in rf_DispatchKernelIO");
	}

	rs = &raid_softc[unit];

	bp = req->bp;

#if 1
	/*
	 * XXX When there is a physical disk failure, someone is passing
	 * us a buffer that contains old stuff !!  Attempt to deal with
	 * this problem without taking a performance hit...
	 * (not sure where the real bug is; it's buried in RAIDframe
	 * somewhere) :-( GO )
	 */
	if (bp->b_flags & B_ERROR) {
		bp->b_flags &= ~B_ERROR;
	}
	if (bp->b_error!=0) {
		bp->b_error = 0;
	}
#endif

	raidbp = RAIDGETBUF(rs);

	raidbp->rf_flags = 0;	/* XXX not really used anywhere... */

	/*
	 * Context for raidiodone.
	 */
	raidbp->rf_obp = bp;
	raidbp->req = req;

	LIST_INIT(&raidbp->rf_buf.b_dep);

	switch (req->type) {
	case RF_IO_TYPE_NOP:
		/* Used primarily to unlock a locked queue. */

		db1_printf(("rf_DispatchKernelIO: NOP to r %d c %d\n",
		    queue->row, queue->col));

		/* XXX need to do something extra here... */

		/*
		 * I'm leaving this in, as I've never actually seen it
		 * used, and I'd like folks to report it... GO
		 */
		db1_printf(("WAKEUP CALLED\n"));
		queue->numOutstanding++;

		/* XXX need to glue the original buffer into this ?? */

		rf_KernelWakeupFunc(&raidbp->rf_buf);
		break;

	case RF_IO_TYPE_READ:
	case RF_IO_TYPE_WRITE:
		if (req->tracerec) {
			RF_ETIMER_START(req->tracerec->timer);
		}

		rf_InitBP(&raidbp->rf_buf, queue->rf_cinfo->ci_vp,
		    op | bp->b_flags, queue->rf_cinfo->ci_dev,
		    req->sectorOffset, req->numSector,
		    req->buf, rf_KernelWakeupFunc, (void *)req,
		    queue->raidPtr->logBytesPerSector, req->b_proc);

		if (rf_debugKernelAccess) {
			db1_printf(("dispatch: bp->b_blkno = %ld\n",
			    (long)bp->b_blkno));
		}
		queue->numOutstanding++;
		queue->last_deq_sector = req->sectorOffset;

		/*
		 * Acc wouldn't have been let in if there were any
		 * pending reqs at any other priority.
		 */
		queue->curPriority = req->priority;

		db1_printf(("Going for %c to unit %d row %d col %d\n",
		    req->type, unit, queue->row, queue->col));
		db1_printf(("sector %d count %d (%d bytes) %d\n",
		    (int)req->sectorOffset, (int)req->numSector,
		    (int)(req->numSector << queue->raidPtr->logBytesPerSector),
		    (int)queue->raidPtr->logBytesPerSector));
		if ((raidbp->rf_buf.b_flags & B_READ) == 0) {
			raidbp->rf_buf.b_vp->v_numoutput++;
		}

		VOP_STRATEGY(&raidbp->rf_buf);
		break;

	default:
		panic("bad req->type in rf_DispatchKernelIO");
	}
	db1_printf(("Exiting from DispatchKernelIO\n"));
	/*splx(s);*/	/* want to test this */
	return (0);
}

/*
 * This is the callback function associated with a I/O invoked from
 * kernel code.
 */
void
rf_KernelWakeupFunc(struct buf *vbp)
{
	RF_DiskQueueData_t *req = NULL;
	RF_DiskQueue_t *queue;
	struct raidbuf *raidbp = (struct raidbuf *)vbp;
	struct buf *bp;
	struct raid_softc *rs;
	int unit;
	int s;

	s = splbio();
	db1_printf(("recovering the request queue:\n"));
	req = raidbp->req;

	bp = raidbp->rf_obp;

	queue = (RF_DiskQueue_t *)req->queue;

	if (raidbp->rf_buf.b_flags & B_ERROR) {
		bp->b_flags |= B_ERROR;
		bp->b_error =
		    raidbp->rf_buf.b_error ? raidbp->rf_buf.b_error : EIO;
	}

#if 1
	/* XXX Methinks this could be wrong... */
	bp->b_resid = raidbp->rf_buf.b_resid;
#endif

	if (req->tracerec) {
		RF_ETIMER_STOP(req->tracerec->timer);
		RF_ETIMER_EVAL(req->tracerec->timer);
		RF_LOCK_MUTEX(rf_tracing_mutex);
		req->tracerec->diskwait_us +=
		    RF_ETIMER_VAL_US(req->tracerec->timer);
		req->tracerec->phys_io_us +=
		    RF_ETIMER_VAL_US(req->tracerec->timer);
		req->tracerec->num_phys_ios++;
		RF_UNLOCK_MUTEX(rf_tracing_mutex);
	}

	bp->b_bcount = raidbp->rf_buf.b_bcount;	/* XXXX ?? */

	unit = queue->raidPtr->raidid;	/* *Much* simpler :-> */

	/*
	 * XXX Ok, let's get aggressive...  If B_ERROR is set, let's go
	 * ballistic, and mark the component as hosed...
	 */
	if (bp->b_flags & B_ERROR) {
		/* Mark the disk as dead but only mark it once... */
		if (queue->raidPtr->Disks[queue->row][queue->col].status ==
		    rf_ds_optimal) {
			printf("raid%d: IO Error.  Marking %s as failed.\n",
			    unit,
			    queue->raidPtr->
			    Disks[queue->row][queue->col].devname);
			queue->raidPtr->Disks[queue->row][queue->col].status =
			    rf_ds_failed;
			queue->raidPtr->status[queue->row] = rf_rs_degraded;
			queue->raidPtr->numFailures++;
			queue->raidPtr->numNewFailures++;
		} else {
			/* Disk is already dead... */
			/* printf("Disk already marked as dead!\n"); */
		}
	}

	rs = &raid_softc[unit];
	RAIDPUTBUF(rs, raidbp);

	rf_DiskIOComplete(queue, req, (bp->b_flags & B_ERROR) ? 1 : 0);
	(req->CompleteFunc)(req->argument, (bp->b_flags & B_ERROR) ? 1 : 0);

	splx(s);
}

/*
 * Initialize a buf structure for doing an I/O in the kernel.
 */
void
rf_InitBP(
	struct buf	 *bp,
	struct vnode	 *b_vp,
	unsigned	  rw_flag,
	dev_t		  dev,
	RF_SectorNum_t	  startSect,
	RF_SectorCount_t  numSect,
	caddr_t		  buf,
	void		(*cbFunc)(struct buf *),
	void		 *cbArg,
	int		  logBytesPerSector,
	struct proc	 *b_proc
)
{
	/*bp->b_flags = B_PHYS | rw_flag;*/
	bp->b_flags = B_CALL | rw_flag;	/* XXX need B_PHYS here too ??? */
	bp->b_bcount = numSect << logBytesPerSector;
	bp->b_bufsize = bp->b_bcount;
	bp->b_error = 0;
	bp->b_dev = dev;
	bp->b_data = buf;
	bp->b_blkno = startSect;
	bp->b_resid = bp->b_bcount;	/* XXX is this right !??!?!! */
	if (bp->b_bcount == 0) {
		panic("bp->b_bcount is zero in rf_InitBP!!");
	}
	bp->b_proc = b_proc;
	bp->b_iodone = cbFunc;
	bp->b_vp = b_vp;
	LIST_INIT(&bp->b_dep);
}

void
raidgetdefaultlabel(RF_Raid_t *raidPtr, struct raid_softc *rs,
    struct disklabel *lp)
{
	db1_printf(("Building a default label...\n"));
	bzero(lp, sizeof(*lp));

	/* Fabricate a label... */
	lp->d_secperunit = raidPtr->totalSectors;
	lp->d_secsize = raidPtr->bytesPerSector;
	lp->d_nsectors = raidPtr->Layout.dataSectorsPerStripe;
	lp->d_ntracks = 4 * raidPtr->numCol;
	lp->d_ncylinders = raidPtr->totalSectors /
	    (lp->d_nsectors * lp->d_ntracks);
	lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors;

	strncpy(lp->d_typename, "raid", sizeof(lp->d_typename));
	lp->d_type = DTYPE_RAID;
	strncpy(lp->d_packname, "fictitious", sizeof(lp->d_packname));
	lp->d_rpm = 3600;
	lp->d_interleave = 1;
	lp->d_flags = 0;

	lp->d_partitions[RAW_PART].p_offset = 0;
	lp->d_partitions[RAW_PART].p_size = raidPtr->totalSectors;
	lp->d_partitions[RAW_PART].p_fstype = FS_UNUSED;
	lp->d_npartitions = RAW_PART + 1;

	lp->d_magic = DISKMAGIC;
	lp->d_magic2 = DISKMAGIC;
	lp->d_checksum = dkcksum(rs->sc_dkdev.dk_label);
}

/*
 * Read the disklabel from the raid device.
 * If one is not present, fake one up.
 */
void
raidgetdisklabel(dev_t dev)
{
	int unit = raidunit(dev);
	struct raid_softc *rs = &raid_softc[unit];
	char *errstring;
	struct disklabel *lp = rs->sc_dkdev.dk_label;
	struct cpu_disklabel *clp = rs->sc_dkdev.dk_cpulabel;
	RF_Raid_t *raidPtr;
	int i;
	struct partition *pp;

	db1_printf(("Getting the disklabel...\n"));

	bzero(clp, sizeof(*clp));

	raidPtr = raidPtrs[unit];

	raidgetdefaultlabel(raidPtr, rs, lp);

	/*
	 * Call the generic disklabel extraction routine.
	 */
	errstring = readdisklabel(RAIDLABELDEV(dev), raidstrategy, lp,
	    rs->sc_dkdev.dk_cpulabel, 0);
	if (errstring) {
		printf("%s: %s\n", rs->sc_xname, errstring);
		return;
		/*raidmakedisklabel(rs);*/
	}

	/*
	 * Sanity check whether the found disklabel is valid.
	 *
	 * This is necessary since total size of the raid device
	 * may vary when an interleave is changed even though exactly
	 * same componets are used, and old disklabel may used
	 * if that is found.
	 */
#ifdef	RAIDDEBUG
	if (lp->d_secperunit != rs->sc_size)
		printf("WARNING: %s: "
		    "total sector size in disklabel (%d) != "
		    "the size of raid (%ld)\n", rs->sc_xname,
		    lp->d_secperunit, (long) rs->sc_size);
#endif	/* RAIDDEBUG */
	for (i = 0; i < lp->d_npartitions; i++) {
		pp = &lp->d_partitions[i];
		if (pp->p_offset + pp->p_size > rs->sc_size)
			printf("WARNING: %s: end of partition `%c' "
			    "exceeds the size of raid (%ld)\n",
			    rs->sc_xname, 'a' + i, (long) rs->sc_size);
	}
}

/*
 * Take care of things one might want to take care of in the event
 * that a disklabel isn't present.
 */
void
raidmakedisklabel(struct raid_softc *rs)
{
	struct disklabel *lp = rs->sc_dkdev.dk_label;
	db1_printf(("Making a label..\n"));

	/*
	 * For historical reasons, if there's no disklabel present
	 * the raw partition must be marked FS_BSDFFS.
	 */

	lp->d_partitions[RAW_PART].p_fstype = FS_BSDFFS;

	strncpy(lp->d_packname, "default label", sizeof(lp->d_packname));

	lp->d_checksum = dkcksum(lp);
}

/*
 * Lookup the provided name in the filesystem.	If the file exists,
 * is a valid block device, and isn't being used by anyone else,
 * set *vpp to the file's vnode.
 * You'll find the original of this in ccd.c
 */
int
raidlookup(char *path, struct proc *p, struct vnode **vpp /* result */)
{
	struct nameidata nd;
	struct vnode *vp;
	struct vattr va;
	int error;

	NDINIT(&nd, LOOKUP, FOLLOW, UIO_SYSSPACE, path, p);
	if ((error = vn_open(&nd, FREAD|FWRITE, 0)) != 0) {
#ifdef	RAIDDEBUG
		printf("RAIDframe: vn_open returned %d\n", error);
#endif	/* RAIDDEBUG */
		return (error);
	}
	vp = nd.ni_vp;
	if (vp->v_usecount > 1) {
		VOP_UNLOCK(vp, 0, p);
		(void)vn_close(vp, FREAD|FWRITE, p->p_ucred, p);
		return (EBUSY);
	}
	if ((error = VOP_GETATTR(vp, &va, p->p_ucred, p)) != 0) {
		VOP_UNLOCK(vp, 0, p);
		(void)vn_close(vp, FREAD|FWRITE, p->p_ucred, p);
		return (error);
	}
	/* XXX: eventually we should handle VREG, too. */
	if (va.va_type != VBLK) {
		VOP_UNLOCK(vp, 0, p);
		(void)vn_close(vp, FREAD|FWRITE, p->p_ucred, p);
		return (ENOTBLK);
	}
	VOP_UNLOCK(vp, 0, p);
	*vpp = vp;
	return (0);
}

/*
 * Wait interruptibly for an exclusive lock.
 *
 * XXX
 * Several drivers do this; it should be abstracted and made MP-safe.
 * (Hmm... where have we seen this warning before :->  GO )
 */
int
raidlock(struct raid_softc *rs)
{
	int error;

	while ((rs->sc_flags & RAIDF_LOCKED) != 0) {
		rs->sc_flags |= RAIDF_WANTED;
		if ((error = tsleep(rs, PRIBIO | PCATCH, "raidlck", 0)) != 0)
			return (error);
	}
	rs->sc_flags |= RAIDF_LOCKED;
	return (0);
}

/*
 * Unlock and wake up any waiters.
 */
void
raidunlock(struct raid_softc *rs)
{
	rs->sc_flags &= ~RAIDF_LOCKED;
	if ((rs->sc_flags & RAIDF_WANTED) != 0) {
		rs->sc_flags &= ~RAIDF_WANTED;
		wakeup(rs);
	}
}


#define	RF_COMPONENT_INFO_OFFSET	16384	/* bytes */
#define	RF_COMPONENT_INFO_SIZE		 1024	/* bytes */

int
raidmarkclean(dev_t dev, struct vnode *b_vp, int mod_counter)
{
	RF_ComponentLabel_t clabel;
	raidread_component_label(dev, b_vp, &clabel);
	clabel.mod_counter = mod_counter;
	clabel.clean = RF_RAID_CLEAN;
	raidwrite_component_label(dev, b_vp, &clabel);
	return(0);
}


int
raidmarkdirty(dev_t dev, struct vnode *b_vp, int mod_counter)
{
	RF_ComponentLabel_t clabel;
	raidread_component_label(dev, b_vp, &clabel);
	clabel.mod_counter = mod_counter;
	clabel.clean = RF_RAID_DIRTY;
	raidwrite_component_label(dev, b_vp, &clabel);
	return(0);
}

/* ARGSUSED */
int
raidread_component_label(dev_t dev, struct vnode *b_vp,
    RF_ComponentLabel_t *clabel)
{
	struct buf *bp;
	int error;

	/*
	 * XXX should probably ensure that we don't try to do this if
	 * someone has changed rf_protected_sectors.
	 */

	if (b_vp == NULL) {
		/*
		 * For whatever reason, this component is not valid.
		 * Don't try to read a component label from it.
		 */
		return(EINVAL);
	}

	/* Get a block of the appropriate size... */
	bp = geteblk((int)RF_COMPONENT_INFO_SIZE);
	bp->b_dev = dev;

	/* Get our ducks in a row for the read. */
	bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE;
	bp->b_bcount = RF_COMPONENT_INFO_SIZE;
	bp->b_flags |= B_READ;
 	bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE;

	(*bdevsw[major(bp->b_dev)].d_strategy)(bp);

	error = biowait(bp);

	if (!error) {
		memcpy(clabel, bp->b_data, sizeof(RF_ComponentLabel_t));
#if 0
		rf_print_component_label( clabel );
#endif
	} else {
		db1_printf(("Failed to read RAID component label!\n"));
	}

	brelse(bp);
	return(error);
}

/* ARGSUSED */
int
raidwrite_component_label(dev_t dev, struct vnode *b_vp,
    RF_ComponentLabel_t *clabel)
{
	struct buf *bp;
	int error;

	/* Get a block of the appropriate size... */
	bp = geteblk((int)RF_COMPONENT_INFO_SIZE);
	bp->b_dev = dev;

	/* Get our ducks in a row for the write. */
	bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE;
	bp->b_bcount = RF_COMPONENT_INFO_SIZE;
	bp->b_flags |= B_WRITE;
 	bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE;

	memset(bp->b_data, 0, RF_COMPONENT_INFO_SIZE );

	memcpy(bp->b_data, clabel, sizeof(RF_ComponentLabel_t));

	(*bdevsw[major(bp->b_dev)].d_strategy)(bp);
	error = biowait(bp);
	brelse(bp);
	if (error) {
		printf("Failed to write RAID component info!\n");
	}

	return(error);
}

void
rf_markalldirty(RF_Raid_t *raidPtr)
{
	RF_ComponentLabel_t clabel;
	int r,c;

	raidPtr->mod_counter++;
	for (r = 0; r < raidPtr->numRow; r++) {
		for (c = 0; c < raidPtr->numCol; c++) {
			/*
			 * We don't want to touch (at all) a disk that has
			 * failed.
			 */
			if (!RF_DEAD_DISK(raidPtr->Disks[r][c].status)) {
				raidread_component_label(
				    raidPtr->Disks[r][c].dev,
				    raidPtr->raid_cinfo[r][c].ci_vp, &clabel);
				if (clabel.status == rf_ds_spared) {
					/*
					 * XXX do something special...
					 * But whatever you do, don't
					 * try to access it !!!
					 */
				} else {
#if 0
					clabel.status =
					    raidPtr->Disks[r][c].status;
					raidwrite_component_label(
					    raidPtr->Disks[r][c].dev,
					    raidPtr->raid_cinfo[r][c].ci_vp,
					    &clabel);
#endif
					raidmarkdirty(
					    raidPtr->Disks[r][c].dev,
					    raidPtr->raid_cinfo[r][c].ci_vp,
					    raidPtr->mod_counter);
				}
			}
		}
	}
	/*printf("Component labels marked dirty.\n");*/
#if 0
	for( c = 0; c < raidPtr->numSpare ; c++) {
		sparecol = raidPtr->numCol + c;
		if (raidPtr->Disks[r][sparecol].status == rf_ds_used_spare) {
			/*
			 * XXX This is where we get fancy and map this spare
			 * into it's correct spot in the array.
			 */
			/*
			 * We claim this disk is "optimal" if it's
			 * rf_ds_used_spare, as that means it should be
			 * directly substitutable for the disk it replaced.
			 * We note that too...
			 */

			for(i=0;i<raidPtr->numRow;i++) {
				for(j=0;j<raidPtr->numCol;j++) {
					if ((raidPtr->Disks[i][j].spareRow ==
					     r) &&
					    (raidPtr->Disks[i][j].spareCol ==
					     sparecol)) {
						srow = r;
						scol = sparecol;
						break;
					}
				}
			}

			raidread_component_label(
			    raidPtr->Disks[r][sparecol].dev,
			    raidPtr->raid_cinfo[r][sparecol].ci_vp, &clabel);
			/* Make sure status is noted. */
			clabel.version = RF_COMPONENT_LABEL_VERSION;
			clabel.mod_counter = raidPtr->mod_counter;
			clabel.serial_number = raidPtr->serial_number;
			clabel.row = srow;
			clabel.column = scol;
			clabel.num_rows = raidPtr->numRow;
			clabel.num_columns = raidPtr->numCol;
			clabel.clean = RF_RAID_DIRTY;	/* Changed in a bit. */
			clabel.status = rf_ds_optimal;
			raidwrite_component_label(
			    raidPtr->Disks[r][sparecol].dev,
			    raidPtr->raid_cinfo[r][sparecol].ci_vp, &clabel);
			raidmarkclean( raidPtr->Disks[r][sparecol].dev,
			    raidPtr->raid_cinfo[r][sparecol].ci_vp);
		}
	}

#endif
}


void
rf_update_component_labels(RF_Raid_t *raidPtr, int final)
{
	RF_ComponentLabel_t clabel;
	int sparecol;
	int r,c;
	int i,j;
	int srow, scol;

	srow = -1;
	scol = -1;

	/*
	 * XXX should do extra checks to make sure things really are clean,
	 * rather than blindly setting the clean bit...
	 */

	raidPtr->mod_counter++;

	for (r = 0; r < raidPtr->numRow; r++) {
		for (c = 0; c < raidPtr->numCol; c++) {
			if (raidPtr->Disks[r][c].status == rf_ds_optimal) {
				raidread_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
				/* Make sure status is noted. */
				clabel.status = rf_ds_optimal;
				/* Bump the counter. */
				clabel.mod_counter = raidPtr->mod_counter;

				raidwrite_component_label(
					raidPtr->Disks[r][c].dev,
					raidPtr->raid_cinfo[r][c].ci_vp,
					&clabel);
				if (final == RF_FINAL_COMPONENT_UPDATE) {
					if (raidPtr->parity_good ==
					    RF_RAID_CLEAN) {
						raidmarkclean(
						    raidPtr->Disks[r][c].dev,
						    raidPtr->
						    raid_cinfo[r][c].ci_vp,
						    raidPtr->mod_counter);
					}
				}
			}
			/* Else we don't touch it... */
		}
	}

	for( c = 0; c < raidPtr->numSpare ; c++) {
		sparecol = raidPtr->numCol + c;
		if (raidPtr->Disks[0][sparecol].status == rf_ds_used_spare) {
			/*
			 * We claim this disk is "optimal" if it's
			 * rf_ds_used_spare, as that means it should be
			 * directly substitutable for the disk it replaced.
			 * We note that too...
			 */

			for(i=0;i<raidPtr->numRow;i++) {
				for(j=0;j<raidPtr->numCol;j++) {
					if ((raidPtr->Disks[i][j].spareRow ==
					     0) &&
					    (raidPtr->Disks[i][j].spareCol ==
					     sparecol)) {
						srow = i;
						scol = j;
						break;
					}
				}
			}

			/* XXX Shouldn't *really* need this... */
			raidread_component_label(
			    raidPtr->Disks[0][sparecol].dev,
			    raidPtr->raid_cinfo[0][sparecol].ci_vp, &clabel);
			/* Make sure status is noted. */

			raid_init_component_label(raidPtr, &clabel);

			clabel.mod_counter = raidPtr->mod_counter;
			clabel.row = srow;
			clabel.column = scol;
			clabel.status = rf_ds_optimal;

			raidwrite_component_label(
			    raidPtr->Disks[0][sparecol].dev,
			    raidPtr->raid_cinfo[0][sparecol].ci_vp, &clabel);
			if (final == RF_FINAL_COMPONENT_UPDATE) {
				if (raidPtr->parity_good == RF_RAID_CLEAN) {
					raidmarkclean(raidPtr->
					    Disks[0][sparecol].dev,
					    raidPtr->
					    raid_cinfo[0][sparecol].ci_vp,
					    raidPtr->mod_counter);
				}
			}
		}
	}
	/*printf("Component labels updated\n");*/
}

void
rf_close_component(RF_Raid_t *raidPtr, struct vnode *vp, int auto_configured)
{
	struct proc *p;

	if ((p = raidPtr->engine_thread) == NULL)
		p = curproc;

	if (vp != NULL) {
		if (auto_configured == 1) {
			VOP_CLOSE(vp, FREAD | FWRITE, NOCRED, p);
			vrele(vp);
		} else {
			if (VOP_ISLOCKED(vp))
				VOP_UNLOCK(vp, 0, p);
			(void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p);
		}
	} else {
		printf("vnode was NULL\n");
	}
}

void
rf_UnconfigureVnodes(RF_Raid_t *raidPtr)
{
	int r,c;
	struct vnode *vp;
	int acd;


	/* We take this opportunity to close the vnodes like we should... */

	for (r = 0; r < raidPtr->numRow; r++) {
		for (c = 0; c < raidPtr->numCol; c++) {
			db1_printf(("Closing vnode for row: %d col: %d\n",
			    r, c));
			vp = raidPtr->raid_cinfo[r][c].ci_vp;
			acd = raidPtr->Disks[r][c].auto_configured;
			rf_close_component(raidPtr, vp, acd);
			raidPtr->raid_cinfo[r][c].ci_vp = NULL;
			raidPtr->Disks[r][c].auto_configured = 0;
		}
	}
	for (r = 0; r < raidPtr->numSpare; r++) {
		db1_printf(("Closing vnode for spare: %d\n", r));
		vp = raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp;
		acd = raidPtr->Disks[0][raidPtr->numCol + r].auto_configured;
		rf_close_component(raidPtr, vp, acd);
		raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp = NULL;
		raidPtr->Disks[0][raidPtr->numCol + r].auto_configured = 0;
	}
}


void
rf_ReconThread(struct rf_recon_req *req)
{
	int s;
	RF_Raid_t *raidPtr;

	s = splbio();
	raidPtr = (RF_Raid_t *) req->raidPtr;
	raidPtr->recon_in_progress = 1;

	rf_FailDisk((RF_Raid_t *) req->raidPtr, req->row, req->col,
		    ((req->flags & RF_FDFLAGS_RECON) ? 1 : 0));

	/* XXX Get rid of this! we don't need it at all... */
	RF_Free(req, sizeof(*req));

	raidPtr->recon_in_progress = 0;
	splx(s);

	/* That's all... */
	kthread_exit(0);	/* Does not return. */
}

void
rf_RewriteParityThread(RF_Raid_t *raidPtr)
{
	int retcode;
	int s;

	s = splbio();
	raidPtr->parity_rewrite_in_progress = 1;
	retcode = rf_RewriteParity(raidPtr);
	if (retcode) {
		printf("raid%d: Error re-writing parity!\n",raidPtr->raidid);
	} else {
		/*
		 * Set the clean bit !  If we shutdown correctly,
		 * the clean bit on each component label will get
		 * set.
		 */
		raidPtr->parity_good = RF_RAID_CLEAN;
	}
	raidPtr->parity_rewrite_in_progress = 0;
	splx(s);

	/* Anyone waiting for us to stop ?  If so, inform them... */
	if (raidPtr->waitShutdown) {
		wakeup(&raidPtr->parity_rewrite_in_progress);
	}

	/* That's all... */
	kthread_exit(0);	/* Does not return. */
}


void
rf_CopybackThread(RF_Raid_t *raidPtr)
{
	int s;

	s = splbio();
	raidPtr->copyback_in_progress = 1;
	rf_CopybackReconstructedData(raidPtr);
	raidPtr->copyback_in_progress = 0;
	splx(s);

	/* That's all... */
	kthread_exit(0);	/* Does not return. */
}


void
rf_ReconstructInPlaceThread(struct rf_recon_req *req)
{
	int retcode;
	int s;
	RF_Raid_t *raidPtr;

	s = splbio();
	raidPtr = req->raidPtr;
	raidPtr->recon_in_progress = 1;
	retcode = rf_ReconstructInPlace(raidPtr, req->row, req->col);
	RF_Free(req, sizeof(*req));
	raidPtr->recon_in_progress = 0;
	splx(s);

	/* That's all... */
	kthread_exit(0);	/* Does not return. */
}


RF_AutoConfig_t *
rf_find_raid_components(void)
{
#ifdef	RAID_AUTOCONFIG
	int major;
	struct vnode *vp;
	struct disklabel label;
	struct device *dv;
	dev_t dev;
	int error;
	int i;
	int good_one;
	RF_ComponentLabel_t *clabel;
	RF_AutoConfig_t *ac;
#endif	/* RAID_AUTOCONFIG */
	RF_AutoConfig_t *ac_list;


	/* Initialize the AutoConfig list. */
	ac_list = NULL;

#ifdef	RAID_AUTOCONFIG
	/* We begin by trolling through *all* the devices on the system. */

	for (dv = alldevs.tqh_first; dv != NULL; dv = dv->dv_list.tqe_next) {

		/* We are only interested in disks... */
		if (dv->dv_class != DV_DISK)
			continue;

		/* We don't care about floppies... */
		if (!strcmp(dv->dv_cfdata->cf_driver->cd_name,"fd")) {
			continue;
		}

		/*
		 * We need to find the device_name_to_block_device_major
		 * stuff.
		 */
		major = findblkmajor(dv);

		/* Get a vnode for the raw partition of this disk. */

		dev = MAKEDISKDEV(major, dv->dv_unit, RAW_PART);
		if (bdevvp(dev, &vp))
			panic("RAID can't alloc vnode");

		error = VOP_OPEN(vp, FREAD, NOCRED, 0);

		if (error) {
			/*
			 * "Who cares."  Continue looking
			 * for something that exists.
			 */
			vput(vp);
			continue;
		}

		/* Ok, the disk exists.  Go get the disklabel. */
		error = VOP_IOCTL(vp, DIOCGDINFO, (caddr_t)&label,
				  FREAD, NOCRED, 0);
		if (error) {
			/*
			 * XXX can't happen - open() would
			 * have errored out (or faked up one).
			 */
			printf("can't get label for dev %s%c (%d)!?!?\n",
			    dv->dv_xname, 'a' + RAW_PART, error);
		}

		/*
		 * We don't need this any more.  We'll allocate it again
		 * a little later if we really do...
		 */
		VOP_CLOSE(vp, FREAD | FWRITE, NOCRED, 0);
		vrele(vp);

		for (i=0; i < label.d_npartitions; i++) {
			/*
			 * We only support partitions marked as RAID.
			 * Except on sparc/sparc64 where FS_RAID doesn't
			 * fit in the SUN disklabel and we need to look
			 * into each and every partition !!!
			 */
#if !defined(__sparc__) && !defined(__sparc64__) && !defined(__sun3__)
			if (label.d_partitions[i].p_fstype != FS_RAID)
				continue;
#else /* !__sparc__ && !__sparc64__ && !__sun3__ */
			if (label.d_partitions[i].p_fstype == FS_SWAP ||
			    label.d_partitions[i].p_fstype == FS_UNUSED)
				continue;
#endif /* __sparc__ || __sparc64__ || __sun3__ */

			dev = MAKEDISKDEV(major, dv->dv_unit, i);
			if (bdevvp(dev, &vp))
				panic("RAID can't alloc vnode");

			error = VOP_OPEN(vp, FREAD, NOCRED, 0);
			if (error) {
				/* Whatever... */
				vput(vp);
				continue;
			}

			good_one = 0;

			clabel = (RF_ComponentLabel_t *)
				malloc(sizeof(RF_ComponentLabel_t), M_RAIDFRAME,
				    M_NOWAIT);
			if (clabel == NULL) {
				/* XXX CLEANUP HERE. */
				printf("RAID auto config: out of memory!\n");
				return(NULL); /* XXX probably should panic ? */
			}

			if (!raidread_component_label(dev, vp, clabel)) {
				/* Got the label.  Does it look reasonable ? */
				if (rf_reasonable_label(clabel) &&
				    (clabel->partitionSize <=
				     label.d_partitions[i].p_size)) {
#ifdef	RAIDDEBUG
					printf("Component on: %s%c: %d\n",
					    dv->dv_xname, 'a'+i,
					    label.d_partitions[i].p_size);
					rf_print_component_label(clabel);
#endif	/* RAIDDEBUG */
					/*
					 * If it's reasonable, add it,
					 * else ignore it.
					 */
					ac = (RF_AutoConfig_t *)
						malloc(sizeof(RF_AutoConfig_t),
						    M_RAIDFRAME, M_NOWAIT);
					if (ac == NULL) {
						/* XXX should panic ??? */
						return(NULL);
					}

					snprintf(ac->devname,
						 sizeof ac->devname, "%s%c",
						 dv->dv_xname, 'a'+i);
					ac->dev = dev;
					ac->vp = vp;
					ac->clabel = clabel;
					ac->next = ac_list;
					ac_list = ac;
					good_one = 1;
				}
			}
			if (!good_one) {
				/* Cleanup. */
				free(clabel, M_RAIDFRAME);
				VOP_CLOSE(vp, FREAD | FWRITE, NOCRED, 0);
				vrele(vp);
			}
		}
	}
#endif	/* RAID_AUTOCONFIG */
	return(ac_list);
}

#ifdef	RAID_AUTOCONFIG
int
rf_reasonable_label(RF_ComponentLabel_t *clabel)
{

	if (((clabel->version==RF_COMPONENT_LABEL_VERSION_1) ||
	     (clabel->version==RF_COMPONENT_LABEL_VERSION)) &&
	    ((clabel->clean == RF_RAID_CLEAN) ||
	     (clabel->clean == RF_RAID_DIRTY)) &&
	    clabel->row >=0 &&
	    clabel->column >= 0 &&
	    clabel->num_rows > 0 &&
	    clabel->num_columns > 0 &&
	    clabel->row < clabel->num_rows &&
	    clabel->column < clabel->num_columns &&
	    clabel->blockSize > 0 &&
	    clabel->numBlocks > 0) {
		/* Label looks reasonable enough... */
		return(1);
	}
	return(0);
}
#endif	/* RAID_AUTOCONFIG */

void
rf_print_component_label(RF_ComponentLabel_t *clabel)
{
	printf("   Row: %d Column: %d Num Rows: %d Num Columns: %d\n",
	    clabel->row, clabel->column, clabel->num_rows, clabel->num_columns);
	printf("   Version: %d Serial Number: %d Mod Counter: %d\n",
	    clabel->version, clabel->serial_number, clabel->mod_counter);
	printf("   Clean: %s Status: %d\n", clabel->clean ? "Yes" : "No",
	    clabel->status );
	printf("   sectPerSU: %d SUsPerPU: %d SUsPerRU: %d\n",
	    clabel->sectPerSU, clabel->SUsPerPU, clabel->SUsPerRU);
	printf("   RAID Level: %c  blocksize: %d numBlocks: %d\n",
	    (char) clabel->parityConfig, clabel->blockSize, clabel->numBlocks);
	printf("   Autoconfig: %s\n", clabel->autoconfigure ? "Yes" : "No" );
	printf("   Contains root partition: %s\n", clabel->root_partition ?
	    "Yes" : "No" );
	printf("   Last configured as: raid%d\n", clabel->last_unit );
#if 0
	printf("   Config order: %d\n", clabel->config_order);
#endif
}

RF_ConfigSet_t *
rf_create_auto_sets(RF_AutoConfig_t *ac_list)
{
	RF_AutoConfig_t *ac;
	RF_ConfigSet_t *config_sets;
	RF_ConfigSet_t *cset;
	RF_AutoConfig_t *ac_next;


	config_sets = NULL;

	/*
	 * Go through the AutoConfig list, and figure out which components
	 * belong to what sets.
	 */
	ac = ac_list;
	while(ac!=NULL) {
		/*
		 * We're going to putz with ac->next, so save it here
		 * for use at the end of the loop.
		 */
		ac_next = ac->next;

		if (config_sets == NULL) {
			/* We will need at least this one... */
			config_sets = (RF_ConfigSet_t *)
				malloc(sizeof(RF_ConfigSet_t), M_RAIDFRAME,
				    M_NOWAIT);
			if (config_sets == NULL) {
				panic("rf_create_auto_sets: No memory!");
			}
			/* This one is easy :) */
			config_sets->ac = ac;
			config_sets->next = NULL;
			config_sets->rootable = 0;
			ac->next = NULL;
		} else {
			/* Which set does this component fit into ? */
			cset = config_sets;
			while(cset!=NULL) {
				if (rf_does_it_fit(cset, ac)) {
					/* Looks like it matches... */
					ac->next = cset->ac;
					cset->ac = ac;
					break;
				}
				cset = cset->next;
			}
			if (cset==NULL) {
				/* Didn't find a match above... new set... */
				cset = (RF_ConfigSet_t *)
					malloc(sizeof(RF_ConfigSet_t),
					    M_RAIDFRAME, M_NOWAIT);
				if (cset == NULL) {
					panic("rf_create_auto_sets: No memory!");
				}
				cset->ac = ac;
				ac->next = NULL;
				cset->next = config_sets;
				cset->rootable = 0;
				config_sets = cset;
			}
		}
		ac = ac_next;
	}


	return(config_sets);
}

int
rf_does_it_fit(RF_ConfigSet_t *cset, RF_AutoConfig_t *ac)
{
	RF_ComponentLabel_t *clabel1, *clabel2;

	/*
	 * If this one matches the *first* one in the set, that's good
	 * enough, since the other members of the set would have been
	 * through here too...
	 */
	/*
	 * Note that we are not checking partitionSize here...
	 *
	 * Note that we are also not checking the mod_counters here.
	 * If everything else matches except the mod_counter, that's
	 * good enough for this test.  We will deal with the mod_counters
	 * a little later in the autoconfiguration process.
	 *
	 *  (clabel1->mod_counter == clabel2->mod_counter) &&
	 *
	 * The reason we don't check for this is that failed disks
	 * will have lower modification counts.  If those disks are
	 * not added to the set they used to belong to, then they will
	 * form their own set, which may result in 2 different sets,
	 * for example, competing to be configured at raid0, and
	 * perhaps competing to be the root filesystem set.  If the
	 * wrong ones get configured, or both attempt to become /,
	 * weird behaviour and or serious lossage will occur.  Thus we
	 * need to bring them into the fold here, and kick them out at
	 * a later point.
	 */

	clabel1 = cset->ac->clabel;
	clabel2 = ac->clabel;
	if ((clabel1->version == clabel2->version) &&
	    (clabel1->serial_number == clabel2->serial_number) &&
	    (clabel1->num_rows == clabel2->num_rows) &&
	    (clabel1->num_columns == clabel2->num_columns) &&
	    (clabel1->sectPerSU == clabel2->sectPerSU) &&
	    (clabel1->SUsPerPU == clabel2->SUsPerPU) &&
	    (clabel1->SUsPerRU == clabel2->SUsPerRU) &&
	    (clabel1->parityConfig == clabel2->parityConfig) &&
	    (clabel1->maxOutstanding == clabel2->maxOutstanding) &&
	    (clabel1->blockSize == clabel2->blockSize) &&
	    (clabel1->numBlocks == clabel2->numBlocks) &&
	    (clabel1->autoconfigure == clabel2->autoconfigure) &&
	    (clabel1->root_partition == clabel2->root_partition) &&
	    (clabel1->last_unit == clabel2->last_unit) &&
	    (clabel1->config_order == clabel2->config_order)) {
		/* If it get's here, it almost *has* to be a match. */
	} else {
		/* It's not consistent with somebody in the set...  Punt. */
		return(0);
	}
	/* All was fine.. It must fit... */
	return(1);
}

int
rf_have_enough_components(RF_ConfigSet_t *cset)
{
	RF_AutoConfig_t *ac;
	RF_AutoConfig_t *auto_config;
	RF_ComponentLabel_t *clabel;
	int r,c;
	int num_rows;
	int num_cols;
	int num_missing;
	int mod_counter;
	int mod_counter_found;
	int even_pair_failed;
	char parity_type;


	/*
	 * Check to see that we have enough 'live' components
	 * of this set.  If so, we can configure it if necessary.
	 */

	num_rows = cset->ac->clabel->num_rows;
	num_cols = cset->ac->clabel->num_columns;
	parity_type = cset->ac->clabel->parityConfig;

	/* XXX Check for duplicate components !?!?!? */

	/* Determine what the mod_counter is supposed to be for this set. */

	mod_counter_found = 0;
	mod_counter = 0;
	ac = cset->ac;
	while(ac!=NULL) {
		if (mod_counter_found==0) {
			mod_counter = ac->clabel->mod_counter;
			mod_counter_found = 1;
		} else {
			if (ac->clabel->mod_counter > mod_counter) {
				mod_counter = ac->clabel->mod_counter;
			}
		}
		ac = ac->next;
	}

	num_missing = 0;
	auto_config = cset->ac;

	for(r=0; r<num_rows; r++) {
		even_pair_failed = 0;
		for(c=0; c<num_cols; c++) {
			ac = auto_config;
			while(ac!=NULL) {
				if ((ac->clabel->row == r) &&
				    (ac->clabel->column == c) &&
				    (ac->clabel->mod_counter == mod_counter)) {
					/* It's this one... */
#ifdef	RAIDDEBUG
					printf("Found: %s at %d,%d\n",
					    ac->devname,r,c);
#endif	/* RAIDDEBUG */
					break;
				}
				ac=ac->next;
			}
			if (ac==NULL) {
				/* Didn't find one here! */
				/*
				 * Special case for RAID 1, especially
				 * where there are more than 2
				 * components (where RAIDframe treats
				 * things a little differently :( )
				 */
				if (parity_type == '1') {
					if (c%2 == 0) {	/* Even component. */
						even_pair_failed = 1;
					} else {	/*
							 * Odd component.
							 * If we're failed,
							 * and so is the even
							 * component, it's
							 * "Good Night, Charlie"
							 */
						if (even_pair_failed == 1) {
							return(0);
						}
					}
				} else {
					/* Normal accounting. */
					num_missing++;
				}
			}
			if ((parity_type == '1') && (c%2 == 1)) {
				/*
				 * Just did an even component, and we didn't
				 * bail... Reset the even_pair_failed flag,
				 * and go on to the next component...
				 */
				even_pair_failed = 0;
			}
		}
	}

	clabel = cset->ac->clabel;

	if (((clabel->parityConfig == '0') && (num_missing > 0)) ||
	    ((clabel->parityConfig == '4') && (num_missing > 1)) ||
	    ((clabel->parityConfig == '5') && (num_missing > 1))) {
		/* XXX This needs to be made *much* more general. */
		/* Too many failures. */
		return(0);
	}
	/*
	 * Otherwise, all is well, and we've got enough to take a kick
	 * at autoconfiguring this set.
	 */
	return(1);
}

void
rf_create_configuration(RF_AutoConfig_t *ac, RF_Config_t *config,
    RF_Raid_t *raidPtr)
{
	RF_ComponentLabel_t *clabel;
	int i;

	clabel = ac->clabel;

	/* 1. Fill in the common stuff. */
	config->numRow = clabel->num_rows;
	config->numCol = clabel->num_columns;
	config->numSpare = 0;	/* XXX Should this be set here ? */
	config->sectPerSU = clabel->sectPerSU;
	config->SUsPerPU = clabel->SUsPerPU;
	config->SUsPerRU = clabel->SUsPerRU;
	config->parityConfig = clabel->parityConfig;
	/* XXX... */
	strlcpy(config->diskQueueType,"fifo", sizeof config->diskQueueType);
	config->maxOutstandingDiskReqs = clabel->maxOutstanding;
	config->layoutSpecificSize = 0;	/* XXX ?? */

	while(ac!=NULL) {
		/*
		 * row/col values will be in range due to the checks
		 * in reasonable_label().
		 */
		strlcpy(config->devnames[ac->clabel->row][ac->clabel->column],
		    ac->devname,
		    sizeof config->devnames[ac->clabel->row][ac->clabel->column]);
		ac = ac->next;
	}

	for(i=0;i<RF_MAXDBGV;i++) {
		config->debugVars[i][0] = NULL;
	}

#ifdef	RAID_DEBUG_ALL

#ifdef	RF_DBG_OPTION
#undef	RF_DBG_OPTION
#endif	/* RF_DBG_OPTION */

#ifdef	__STDC__
#define	RF_DBG_OPTION(_option_,_val_)	do {				\
	snprintf(&(config->debugVars[i++][0]), 50, "%s %ld",		\
	    #_option_, _val_);						\
} while (0)
#else	/* __STDC__ */
#define	RF_DBG_OPTION(_option_,_val_)	do {				\
	snprintf(&(config->debugVars[i++][0]), 50, "%s %ld",		\
	    "/**/_option_/**/", _val_);					\
} while (0)
#endif	/* __STDC__ */

	i = 0;

/*	RF_DBG_OPTION(accessDebug, 0);					*/
/*	RF_DBG_OPTION(accessTraceBufSize, 0);				*/
	RF_DBG_OPTION(cscanDebug, 1);		/* Debug CSCAN sorting.	*/
	RF_DBG_OPTION(dagDebug, 1);
/*	RF_DBG_OPTION(debugPrintUseBuffer, 0);				*/
	RF_DBG_OPTION(degDagDebug, 1);
	RF_DBG_OPTION(disableAsyncAccs, 1);
	RF_DBG_OPTION(diskDebug, 1);
	RF_DBG_OPTION(enableAtomicRMW, 0);
		/*
		 * This debug variable enables locking of the
		 * disk arm during small-write operations.
		 * Setting this variable to anything other than
		 * 0 will result in deadlock.  (wvcii)
		 */
	RF_DBG_OPTION(engineDebug, 1);
	RF_DBG_OPTION(fifoDebug, 1);		/* Debug fifo queueing.	*/
/*	RF_DBG_OPTION(floatingRbufDebug, 1);				*/
/*	RF_DBG_OPTION(forceHeadSepLimit, -1);				*/
/*	RF_DBG_OPTION(forceNumFloatingReconBufs, -1);			*/
		/*
		 * Wire down the number of extra recon buffers
		 * to use.
		 */
/*	RF_DBG_OPTION(keepAccTotals, 1);				*/
		/* Turn on keep_acc_totals. */
	RF_DBG_OPTION(lockTableSize, RF_DEFAULT_LOCK_TABLE_SIZE);
	RF_DBG_OPTION(mapDebug, 1);
	RF_DBG_OPTION(maxNumTraces, -1);

/*	RF_DBG_OPTION(memChunkDebug, 1);				*/
/*	RF_DBG_OPTION(memDebug, 1);					*/
/*	RF_DBG_OPTION(memDebugAddress, 1);				*/
/*	RF_DBG_OPTION(numBufsToAccumulate, 1);				*/
		/*
		 * Number of buffers to accumulate before
		 * doing XOR.
		 */
	RF_DBG_OPTION(prReconSched, 0);
	RF_DBG_OPTION(printDAGsDebug, 1);
	RF_DBG_OPTION(printStatesDebug, 1);
	RF_DBG_OPTION(protectedSectors, 64L);
		/*
		 * Number of sectors at start of disk to exclude
		 * from RAID address space.
		 */
	RF_DBG_OPTION(pssDebug, 1);
	RF_DBG_OPTION(queueDebug, 1);
	RF_DBG_OPTION(quiesceDebug, 1);
	RF_DBG_OPTION(raidSectorOffset, 0);
		/*
		 * Value added to all incoming sectors to debug
		 * alignment problems.
		 */
	RF_DBG_OPTION(reconDebug, 1);
	RF_DBG_OPTION(reconbufferDebug, 1);
	RF_DBG_OPTION(scanDebug, 1);		/* Debug SCAN sorting.	*/
	RF_DBG_OPTION(showXorCallCounts, 0);
		/* Show n-way Xor call counts. */
	RF_DBG_OPTION(shutdownDebug, 1);	/* Show shutdown calls.	*/
	RF_DBG_OPTION(sizePercentage, 100);
	RF_DBG_OPTION(sstfDebug, 1);
		/* Turn on debugging info for sstf queueing. */
	RF_DBG_OPTION(stripeLockDebug, 1);
	RF_DBG_OPTION(suppressLocksAndLargeWrites, 0);
	RF_DBG_OPTION(suppressTraceDelays, 0);
	RF_DBG_OPTION(useMemChunks, 1);
	RF_DBG_OPTION(validateDAGDebug, 1);
	RF_DBG_OPTION(validateVisitedDebug, 1);
		/* XXX turn to zero by default ? */
	RF_DBG_OPTION(verifyParityDebug, 1);
	RF_DBG_OPTION(debugKernelAccess, 1);
		/* DoAccessKernel debugging. */

#if RF_INCLUDE_PARITYLOGGING > 0
	RF_DBG_OPTION(forceParityLogReint, 0);
	RF_DBG_OPTION(numParityRegions, 0);
		/* Number of regions in the array. */
	RF_DBG_OPTION(numReintegrationThreads, 1);
	RF_DBG_OPTION(parityLogDebug, 1);
		/* If nonzero, enables debugging of parity logging. */
	RF_DBG_OPTION(totalInCoreLogCapacity, 1024 * 1024);
		/* Target bytes available for in-core logs. */
#endif	/* RF_INCLUDE_PARITYLOGGING > 0 */

#endif	/* RAID_DEBUG_ALL */
}

int
rf_set_autoconfig(RF_Raid_t *raidPtr, int new_value)
{
	RF_ComponentLabel_t clabel;
	struct vnode *vp;
	dev_t dev;
	int row, column;

	raidPtr->autoconfigure = new_value;
	for(row=0; row<raidPtr->numRow; row++) {
		for(column=0; column<raidPtr->numCol; column++) {
			if (raidPtr->Disks[row][column].status ==
			    rf_ds_optimal) {
				dev = raidPtr->Disks[row][column].dev;
				vp = raidPtr->raid_cinfo[row][column].ci_vp;
				raidread_component_label(dev, vp, &clabel);
				clabel.autoconfigure = new_value;
				raidwrite_component_label(dev, vp, &clabel);
			}
		}
	}
	return(new_value);
}

int
rf_set_rootpartition(RF_Raid_t *raidPtr, int new_value)
{
	RF_ComponentLabel_t clabel;
	struct vnode *vp;
	dev_t dev;
	int row, column;

	raidPtr->root_partition = new_value;
	for(row=0; row<raidPtr->numRow; row++) {
		for(column=0; column<raidPtr->numCol; column++) {
			if (raidPtr->Disks[row][column].status ==
			    rf_ds_optimal) {
				dev = raidPtr->Disks[row][column].dev;
				vp = raidPtr->raid_cinfo[row][column].ci_vp;
				raidread_component_label(dev, vp, &clabel);
				clabel.root_partition = new_value;
				raidwrite_component_label(dev, vp, &clabel);
			}
		}
	}
	return(new_value);
}

void
rf_release_all_vps(RF_ConfigSet_t *cset)
{
	RF_AutoConfig_t *ac;

	ac = cset->ac;
	while(ac!=NULL) {
		/* Close the vp, and give it back. */
		if (ac->vp) {
			VOP_CLOSE(ac->vp, FREAD, NOCRED, 0);
			vrele(ac->vp);
			ac->vp = NULL;
		}
		ac = ac->next;
	}
}


void
rf_cleanup_config_set(RF_ConfigSet_t *cset)
{
	RF_AutoConfig_t *ac;
	RF_AutoConfig_t *next_ac;

	ac = cset->ac;
	while(ac!=NULL) {
		next_ac = ac->next;
		/* Nuke the label. */
		free(ac->clabel, M_RAIDFRAME);
		/* Cleanup the config structure. */
		free(ac, M_RAIDFRAME);
		/* "next..." */
		ac = next_ac;
	}
	/* And, finally, nuke the config set. */
	free(cset, M_RAIDFRAME);
}


void
raid_init_component_label(RF_Raid_t *raidPtr, RF_ComponentLabel_t *clabel)
{
	/* Current version number. */
	clabel->version = RF_COMPONENT_LABEL_VERSION;
	clabel->serial_number = raidPtr->serial_number;
	clabel->mod_counter = raidPtr->mod_counter;
	clabel->num_rows = raidPtr->numRow;
	clabel->num_columns = raidPtr->numCol;
	clabel->clean = RF_RAID_DIRTY;	/* Not clean. */
	clabel->status = rf_ds_optimal;	/* "It's good !" */

	clabel->sectPerSU = raidPtr->Layout.sectorsPerStripeUnit;
	clabel->SUsPerPU = raidPtr->Layout.SUsPerPU;
	clabel->SUsPerRU = raidPtr->Layout.SUsPerRU;

	clabel->blockSize = raidPtr->bytesPerSector;
	clabel->numBlocks = raidPtr->sectorsPerDisk;

	/* XXX Not portable. */
	clabel->parityConfig = raidPtr->Layout.map->parityConfig;
	clabel->maxOutstanding = raidPtr->maxOutstanding;
	clabel->autoconfigure = raidPtr->autoconfigure;
	clabel->root_partition = raidPtr->root_partition;
	clabel->last_unit = raidPtr->raidid;
	clabel->config_order = raidPtr->config_order;
}

int
rf_auto_config_set(RF_ConfigSet_t *cset, int *unit)
{
	RF_Raid_t *raidPtr;
	RF_Config_t *config;
	int raidID;
	int retcode;

	db1_printf(("RAID autoconfigure\n"));

	retcode = 0;
	*unit = -1;

	/* 1. Create a config structure. */

	config = (RF_Config_t *)malloc(sizeof(RF_Config_t), M_RAIDFRAME,
	    M_NOWAIT);
	if (config==NULL) {
		printf("Out of mem!?!?\n");
				/* XXX Do something more intelligent here. */
		return(1);
	}

	memset(config, 0, sizeof(RF_Config_t));

	/* XXX raidID needs to be set correctly... */

	/*
	 * 2. Figure out what RAID ID this one is supposed to live at.
	 * See if we can get the same RAID dev that it was configured
	 * on last time...
	 */

	raidID = cset->ac->clabel->last_unit;
	if ((raidID < 0) || (raidID >= numraid)) {
		/* Let's not wander off into lala land. */
		raidID = numraid - 1;
	}
	if (raidPtrs[raidID]->valid != 0) {

		/*
		 * Nope...  Go looking for an alternative...
		 * Start high so we don't immediately use raid0 if that's
		 * not taken.
		 */

		for(raidID = numraid - 1; raidID >= 0; raidID--) {
			if (raidPtrs[raidID]->valid == 0) {
				/* We can use this one ! */
				break;
			}
		}
	}

	if (raidID < 0) {
		/* Punt... */
		printf("Unable to auto configure this set!\n");
		printf("(Out of RAID devs!)\n");
		return(1);
	}
	raidPtr = raidPtrs[raidID];

	/* XXX All this stuff should be done SOMEWHERE ELSE ! */
	raidPtr->raidid = raidID;
	raidPtr->openings = RAIDOUTSTANDING;

	/* 3. Build the configuration structure. */
	rf_create_configuration(cset->ac, config, raidPtr);

	/* 4. Do the configuration. */
	retcode = rf_Configure(raidPtr, config, cset->ac);

	if (retcode == 0) {

		raidinit(raidPtrs[raidID]);

		rf_markalldirty(raidPtrs[raidID]);
		raidPtrs[raidID]->autoconfigure = 1; /* XXX Do this here ? */
		if (cset->ac->clabel->root_partition==1) {
			/*
			 * Everything configured just fine.  Make a note
			 * that this set is eligible to be root.
			 */
			cset->rootable = 1;
			/* XXX Do this here ? */
			raidPtrs[raidID]->root_partition = 1;
		}
	}

	printf(": (%s) total number of sectors is %lu (%lu MB)%s\n",
	    (raidPtrs[raidID]->Layout).map->configName,
	    (unsigned long) raidPtrs[raidID]->totalSectors,
	    (unsigned long) (raidPtrs[raidID]->totalSectors / 1024 *
	    (1 << raidPtrs[raidID]->logBytesPerSector) / 1024),
	    raidPtrs[raidID]->root_partition ? " as root" : "");

	/* 5. Cleanup. */
	free(config, M_RAIDFRAME);

	*unit = raidID;
	return(retcode);
}

void
rf_disk_unbusy(RF_RaidAccessDesc_t *desc)
{
	struct buf *bp;

	bp = (struct buf *)desc->bp;
	disk_unbusy(&raid_softc[desc->raidPtr->raidid].sc_dkdev,
			    (bp->b_bcount - bp->b_resid),
			    (bp->b_flags & B_READ));
}