path: root/sys/kern/kern_timeout.c

/*	$OpenBSD: kern_timeout.c,v 1.57 2019/07/19 00:11:38 cheloha Exp $	*/
/*
 * Copyright (c) 2001 Thomas Nordin <nordin@openbsd.org>
 * Copyright (c) 2000-2001 Artur Grabowski <art@openbsd.org>
 * All rights reserved. 
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met: 
 *
 * 1. Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer. 
 * 2. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
 * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL  DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kthread.h>
#include <sys/timeout.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
#include <sys/queue.h>			/* _Q_INVALIDATE */
#include <sys/sysctl.h>
#include <sys/witness.h>

#ifdef DDB
#include <machine/db_machdep.h>
#include <ddb/db_interface.h>
#include <ddb/db_sym.h>
#include <ddb/db_output.h>
#endif

/*
 * Timeouts are kept in a hierarchical timing wheel. The to_time is the value
 * of the global variable "ticks" when the timeout should be called. There are
 * four levels with 256 buckets each. See 'Scheme 7' in
 * "Hashed and Hierarchical Timing Wheels: Efficient Data Structures for
 * Implementing a Timer Facility" by George Varghese and Tony Lauck.
 */
#define BUCKETS 1024
#define WHEELSIZE 256
#define WHEELMASK 255
#define WHEELBITS 8

struct circq timeout_wheel[BUCKETS];	/* Queues of timeouts */
struct circq timeout_todo;		/* Worklist */
struct circq timeout_proc;		/* Due timeouts needing proc. context */

#define MASKWHEEL(wheel, time) (((time) >> ((wheel)*WHEELBITS)) & WHEELMASK)

#define BUCKET(rel, abs)						\
    (timeout_wheel[							\
	((rel) <= (1 << (2*WHEELBITS)))					\
	    ? ((rel) <= (1 << WHEELBITS))				\
		? MASKWHEEL(0, (abs))					\
		: MASKWHEEL(1, (abs)) + WHEELSIZE			\
	    : ((rel) <= (1 << (3*WHEELBITS)))				\
		? MASKWHEEL(2, (abs)) + 2*WHEELSIZE			\
		: MASKWHEEL(3, (abs)) + 3*WHEELSIZE])

#define MOVEBUCKET(wheel, time)						\
    CIRCQ_APPEND(&timeout_todo,						\
        &timeout_wheel[MASKWHEEL((wheel), (time)) + (wheel)*WHEELSIZE])

/*
 * The first thing in a struct timeout is its struct circq, so we
 * can get back from a pointer to the latter to a pointer to the
 * whole timeout with just a cast.
 */
static __inline struct timeout *
timeout_from_circq(struct circq *p)
{
	return ((struct timeout *)(p));
}

/*
 * All wheels are locked with the same mutex.
 *
 * We need locking since the timeouts are manipulated from hardclock that's
 * not behind the big lock.
 */
struct mutex timeout_mutex = MUTEX_INITIALIZER(IPL_HIGH);

struct timeoutstat tostat;

/*
 * Circular queue definitions.
 */

#define CIRCQ_INIT(elem) do {                   \
        (elem)->next = (elem);                  \
        (elem)->prev = (elem);                  \
} while (0)

#define CIRCQ_INSERT(elem, list) do {           \
        (elem)->prev = (list)->prev;            \
        (elem)->next = (list);                  \
        (list)->prev->next = (elem);            \
        (list)->prev = (elem);                  \
        tostat.tos_pending++;                   \
} while (0)

#define CIRCQ_APPEND(fst, snd) do {             \
        if (!CIRCQ_EMPTY(snd)) {                \
                (fst)->prev->next = (snd)->next;\
                (snd)->next->prev = (fst)->prev;\
                (snd)->prev->next = (fst);      \
                (fst)->prev = (snd)->prev;      \
                CIRCQ_INIT(snd);                \
        }                                       \
} while (0)

#define CIRCQ_REMOVE(elem) do {                 \
        (elem)->next->prev = (elem)->prev;      \
        (elem)->prev->next = (elem)->next;      \
	_Q_INVALIDATE((elem)->prev);		\
	_Q_INVALIDATE((elem)->next);		\
	tostat.tos_pending--;			\
} while (0)

#define CIRCQ_FIRST(elem) ((elem)->next)

#define CIRCQ_EMPTY(elem) (CIRCQ_FIRST(elem) == (elem))

void softclock_thread(void *);
void softclock_create_thread(void *);

#ifdef WITNESS
struct lock_object timeout_sleeplock_obj = {
	.lo_name = "timeout",
	.lo_flags = LO_WITNESS | LO_INITIALIZED | LO_SLEEPABLE |
	    (LO_CLASS_RWLOCK << LO_CLASSSHIFT)
};
struct lock_object timeout_spinlock_obj = {
	.lo_name = "timeout",
	.lo_flags = LO_WITNESS | LO_INITIALIZED |
	    (LO_CLASS_MUTEX << LO_CLASSSHIFT)
};
struct lock_type timeout_sleeplock_type = {
	.lt_name = "timeout"
};
struct lock_type timeout_spinlock_type = {
	.lt_name = "timeout"
};
#define TIMEOUT_LOCK_OBJ(needsproc) \
	((needsproc) ? &timeout_sleeplock_obj : &timeout_spinlock_obj)
#endif

static void
timeout_sync_order(int needsproc)
{
	WITNESS_CHECKORDER(TIMEOUT_LOCK_OBJ(needsproc), LOP_NEWORDER, NULL);
}

static void
timeout_sync_enter(int needsproc)
{
	timeout_sync_order(needsproc);
	WITNESS_LOCK(TIMEOUT_LOCK_OBJ(needsproc), 0);
}

static void
timeout_sync_leave(int needsproc)
{
	WITNESS_UNLOCK(TIMEOUT_LOCK_OBJ(needsproc), 0);
}

/*
 * Some of the "math" in here is a bit tricky.
 *
 * We have to beware of wrapping ints.
 * We use the fact that any element added to the queue must be added with a
 * positive time. That means that any element `to' on the queue cannot be
 * scheduled to timeout further in time than INT_MAX, but to->to_time can
 * be positive or negative so comparing it with anything is dangerous.
 * The only way we can use the to->to_time value in any predictable way
 * is when we calculate how far in the future `to' will timeout -
 * "to->to_time - ticks". The result will always be positive for future
 * timeouts and 0 or negative for due timeouts.
 */

void
timeout_startup(void)
{
	int b;

	CIRCQ_INIT(&timeout_todo);
	CIRCQ_INIT(&timeout_proc);
	for (b = 0; b < nitems(timeout_wheel); b++)
		CIRCQ_INIT(&timeout_wheel[b]);
}

void
timeout_proc_init(void)
{
	WITNESS_INIT(&timeout_sleeplock_obj, &timeout_sleeplock_type);
	WITNESS_INIT(&timeout_spinlock_obj, &timeout_spinlock_type);

	kthread_create_deferred(softclock_create_thread, NULL);
}

void
timeout_set(struct timeout *new, void (*fn)(void *), void *arg)
{
	new->to_func = fn;
	new->to_arg = arg;
	new->to_flags = TIMEOUT_INITIALIZED;
}

void
timeout_set_proc(struct timeout *new, void (*fn)(void *), void *arg)
{
	timeout_set(new, fn, arg);
	new->to_flags |= TIMEOUT_NEEDPROCCTX;
}

int
timeout_add(struct timeout *new, int to_ticks)
{
	int old_time;
	int ret = 1;

#ifdef DIAGNOSTIC
	if (!(new->to_flags & TIMEOUT_INITIALIZED))
		panic("timeout_add: not initialized");
	if (to_ticks < 0)
		panic("timeout_add: to_ticks (%d) < 0", to_ticks);
#endif

	mtx_enter(&timeout_mutex);
	/* Initialize the time here, it won't change. */
	old_time = new->to_time;
	new->to_time = to_ticks + ticks;
	new->to_flags &= ~TIMEOUT_TRIGGERED;

	/*
	 * If this timeout already is scheduled and now is moved
	 * earlier, reschedule it now. Otherwise leave it in place
	 * and let it be rescheduled later.
	 */
	if (new->to_flags & TIMEOUT_ONQUEUE) {
		if (new->to_time - ticks < old_time - ticks) {
			CIRCQ_REMOVE(&new->to_list);
			CIRCQ_INSERT(&new->to_list, &timeout_todo);
		}
		tostat.tos_readded++;
		ret = 0;
	} else {
		new->to_flags |= TIMEOUT_ONQUEUE;
		CIRCQ_INSERT(&new->to_list, &timeout_todo);
	}
	tostat.tos_added++;
	mtx_leave(&timeout_mutex);

	return (ret);
}

int
timeout_add_tv(struct timeout *to, const struct timeval *tv)
{
	uint64_t to_ticks;

	to_ticks = (uint64_t)hz * tv->tv_sec + tv->tv_usec / tick;
	if (to_ticks > INT_MAX)
		to_ticks = INT_MAX;
	if (to_ticks == 0 && tv->tv_usec > 0)
		to_ticks = 1;

	return (timeout_add(to, (int)to_ticks));
}

int
timeout_add_ts(struct timeout *to, const struct timespec *ts)
{
	uint64_t to_ticks;

	to_ticks = (uint64_t)hz * ts->tv_sec + ts->tv_nsec / (tick * 1000);
	if (to_ticks > INT_MAX)
		to_ticks = INT_MAX;
	if (to_ticks == 0 && ts->tv_nsec > 0)
		to_ticks = 1;

	return (timeout_add(to, (int)to_ticks));
}

int
timeout_add_bt(struct timeout *to, const struct bintime *bt)
{
	uint64_t to_ticks;

	to_ticks = (uint64_t)hz * bt->sec + (long)(((uint64_t)1000000 *
	    (uint32_t)(bt->frac >> 32)) >> 32) / tick;
	if (to_ticks > INT_MAX)
		to_ticks = INT_MAX;
	if (to_ticks == 0 && bt->frac > 0)
		to_ticks = 1;

	return (timeout_add(to, (int)to_ticks));
}

int
timeout_add_sec(struct timeout *to, int secs)
{
	uint64_t to_ticks;

	to_ticks = (uint64_t)hz * secs;
	if (to_ticks > INT_MAX)
		to_ticks = INT_MAX;

	return (timeout_add(to, (int)to_ticks));
}

int
timeout_add_msec(struct timeout *to, int msecs)
{
	uint64_t to_ticks;

	to_ticks = (uint64_t)msecs * 1000 / tick;
	if (to_ticks > INT_MAX)
		to_ticks = INT_MAX;
	if (to_ticks == 0 && msecs > 0)
		to_ticks = 1;

	return (timeout_add(to, (int)to_ticks));
}

int
timeout_add_usec(struct timeout *to, int usecs)
{
	int to_ticks = usecs / tick;

	if (to_ticks == 0 && usecs > 0)
		to_ticks = 1;

	return (timeout_add(to, to_ticks));
}

int
timeout_add_nsec(struct timeout *to, int nsecs)
{
	int to_ticks = nsecs / (tick * 1000);

	if (to_ticks == 0 && nsecs > 0)
		to_ticks = 1;

	return (timeout_add(to, to_ticks));
}

int
timeout_del(struct timeout *to)
{
	int ret = 0;

	mtx_enter(&timeout_mutex);
	if (to->to_flags & TIMEOUT_ONQUEUE) {
		CIRCQ_REMOVE(&to->to_list);
		to->to_flags &= ~TIMEOUT_ONQUEUE;
		tostat.tos_cancelled++;
		ret = 1;
	}
	to->to_flags &= ~TIMEOUT_TRIGGERED;
	tostat.tos_deleted++;
	mtx_leave(&timeout_mutex);

	return (ret);
}

int
timeout_del_barrier(struct timeout *to)
{
	int removed;

	timeout_sync_order(ISSET(to->to_flags, TIMEOUT_NEEDPROCCTX));

	removed = timeout_del(to);
	if (!removed)
		timeout_barrier(to);

	return (removed);
}

void	timeout_proc_barrier(void *);

void
timeout_barrier(struct timeout *to)
{
	int needsproc = ISSET(to->to_flags, TIMEOUT_NEEDPROCCTX);

	timeout_sync_order(needsproc);

	if (!needsproc) {
		KERNEL_LOCK();
		splx(splsoftclock());
		KERNEL_UNLOCK();
	} else {
		struct cond c = COND_INITIALIZER();
		struct timeout barrier;

		timeout_set_proc(&barrier, timeout_proc_barrier, &c);

		mtx_enter(&timeout_mutex);
		barrier.to_flags |= TIMEOUT_ONQUEUE;
		CIRCQ_INSERT(&barrier.to_list, &timeout_proc);
		mtx_leave(&timeout_mutex);

		wakeup_one(&timeout_proc);

		cond_wait(&c, "tmobar");
	}
}

void
timeout_proc_barrier(void *arg)
{
	struct cond *c = arg;

	cond_signal(c);
}

/*
 * This is called from hardclock() once every tick.
 * We return !0 if we need to schedule a softclock.
 */
int
timeout_hardclock_update(void)
{
	int ret;

	mtx_enter(&timeout_mutex);

	MOVEBUCKET(0, ticks);
	if (MASKWHEEL(0, ticks) == 0) {
		MOVEBUCKET(1, ticks);
		if (MASKWHEEL(1, ticks) == 0) {
			MOVEBUCKET(2, ticks);
			if (MASKWHEEL(2, ticks) == 0)
				MOVEBUCKET(3, ticks);
		}
	}
	ret = !CIRCQ_EMPTY(&timeout_todo);
	mtx_leave(&timeout_mutex);

	return (ret);
}

void
timeout_run(struct timeout *to)
{
	void (*fn)(void *);
	void *arg;
	int needsproc;

	MUTEX_ASSERT_LOCKED(&timeout_mutex);

	to->to_flags &= ~TIMEOUT_ONQUEUE;
	to->to_flags |= TIMEOUT_TRIGGERED;

	fn = to->to_func;
	arg = to->to_arg;
	needsproc = ISSET(to->to_flags, TIMEOUT_NEEDPROCCTX);

	mtx_leave(&timeout_mutex);
	timeout_sync_enter(needsproc);
	fn(arg);
	timeout_sync_leave(needsproc);
	mtx_enter(&timeout_mutex);
}

void
softclock(void *arg)
{
	int delta;
	struct circq *bucket;
	struct timeout *to;
	int needsproc = 0;

	mtx_enter(&timeout_mutex);
	while (!CIRCQ_EMPTY(&timeout_todo)) {
		to = timeout_from_circq(CIRCQ_FIRST(&timeout_todo));
		CIRCQ_REMOVE(&to->to_list);

		/*
		 * If due run it or defer execution to the thread,
		 * otherwise insert it into the right bucket.
		 */
		delta = to->to_time - ticks;
		if (delta > 0) {
			bucket = &BUCKET(delta, to->to_time);
			CIRCQ_INSERT(&to->to_list, bucket);
			tostat.tos_rescheduled++;
		} else if (to->to_flags & TIMEOUT_NEEDPROCCTX) {
			CIRCQ_INSERT(&to->to_list, &timeout_proc);
			needsproc = 1;
		} else {
			if (delta < 0) {
				tostat.tos_late++;
#ifdef DEBUG
				printf("timeout delayed %d\n", delta);
#endif
			}
			timeout_run(to);
			tostat.tos_run_softclock++;
		}
	}
	tostat.tos_softclocks++;
	mtx_leave(&timeout_mutex);

	if (needsproc)
		wakeup(&timeout_proc);
}

void
softclock_create_thread(void *arg)
{
	if (kthread_create(softclock_thread, NULL, NULL, "softclock"))
		panic("fork softclock");
}

void
softclock_thread(void *arg)
{
	CPU_INFO_ITERATOR cii;
	struct cpu_info *ci;
	struct sleep_state sls;
	struct timeout *to;

	KERNEL_ASSERT_LOCKED();

	/* Be conservative for the moment */
	CPU_INFO_FOREACH(cii, ci) {
		if (CPU_IS_PRIMARY(ci))
			break;
	}
	KASSERT(ci != NULL);
	sched_peg_curproc(ci);

	for (;;) {
		sleep_setup(&sls, &timeout_proc, PSWP, "bored");
		sleep_finish(&sls, CIRCQ_EMPTY(&timeout_proc));

		mtx_enter(&timeout_mutex);
		while (!CIRCQ_EMPTY(&timeout_proc)) {
			to = timeout_from_circq(CIRCQ_FIRST(&timeout_proc));
			CIRCQ_REMOVE(&to->to_list);
			timeout_run(to);
			tostat.tos_run_thread++;
		}
		tostat.tos_thread_wakeups++;
		mtx_leave(&timeout_mutex);
	}
}

#ifndef SMALL_KERNEL
void
timeout_adjust_ticks(int adj)
{
	struct timeout *to;
	struct circq *p;
	int new_ticks, b;

	/* adjusting the monotonic clock backwards would be a Bad Thing */
	if (adj <= 0)
		return;

	mtx_enter(&timeout_mutex);
	new_ticks = ticks + adj;
	for (b = 0; b < nitems(timeout_wheel); b++) {
		p = CIRCQ_FIRST(&timeout_wheel[b]);
		while (p != &timeout_wheel[b]) {
			to = timeout_from_circq(p);
			p = CIRCQ_FIRST(p);

			/* when moving a timeout forward need to reinsert it */
			if (to->to_time - ticks < adj)
				to->to_time = new_ticks;
			CIRCQ_REMOVE(&to->to_list);
			CIRCQ_INSERT(&to->to_list, &timeout_todo);
		}
	}
	ticks = new_ticks;
	mtx_leave(&timeout_mutex);
}
#endif

int
timeout_sysctl(void *oldp, size_t *oldlenp, void *newp, size_t newlen)
{
	struct timeoutstat status;

	mtx_enter(&timeout_mutex);
	memcpy(&status, &tostat, sizeof(status));
	mtx_leave(&timeout_mutex);

	return sysctl_rdstruct(oldp, oldlenp, newp, &status, sizeof(status));
}

#ifdef DDB
void db_show_callout_bucket(struct circq *);

void
db_show_callout_bucket(struct circq *bucket)
{
	char buf[8];
	struct timeout *to;
	struct circq *p;
	db_expr_t offset;
	char *name, *where;
	int width = sizeof(long) * 2;

	for (p = CIRCQ_FIRST(bucket); p != bucket; p = CIRCQ_FIRST(p)) {
		to = timeout_from_circq(p);
		db_find_sym_and_offset((db_addr_t)to->to_func, &name, &offset);
		name = name ? name : "?";
		if (bucket == &timeout_todo)
			where = "softint";
		else if (bucket == &timeout_proc)
			where = "thread";
		else {
			snprintf(buf, sizeof(buf), "%3ld/%1ld",
			    (bucket - timeout_wheel) % WHEELSIZE,
			    (bucket - timeout_wheel) / WHEELSIZE);
			where = buf;
		}
		db_printf("%9d  %7s  0x%0*lx  %s\n",
		    to->to_time - ticks, where, width, (ulong)to->to_arg, name);
	}
}

void
db_show_callout(db_expr_t addr, int haddr, db_expr_t count, char *modif)
{
	int width = sizeof(long) * 2 + 2;
	int b;

	db_printf("ticks now: %d\n", ticks);
	db_printf("%9s  %7s  %*s  func\n", "ticks", "wheel", width, "arg");

	db_show_callout_bucket(&timeout_todo);
	db_show_callout_bucket(&timeout_proc);
	for (b = 0; b < nitems(timeout_wheel); b++)
		db_show_callout_bucket(&timeout_wheel[b]);
}
#endif