path: root/usr.sbin/pkg_add/pkg_add.1

.\"	$OpenBSD: pkg_add.1,v 1.132 2015/04/16 20:01:39 jmc Exp $
.\"
.\" Documentation and design originally from FreeBSD. All the code has
.\" been rewritten since. We keep the documentation's notice:
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" Jordan K. Hubbard
.\"
.\"
.Dd $Mdocdate: April 16 2015 $
.Dt PKG_ADD 1
.Os
.Sh NAME
.Nm pkg_add
.Nd install software package distributions
.Sh SYNOPSIS
.Nm pkg_add
.Bk -words
.Op Fl acIimnqrsUuvxz
.Op Fl A Ar arch
.Op Fl B Ar pkg-destdir
.Op Fl D Ar name Ns Op = Ns Ar value
.Op Fl L Ar localbase
.Op Fl l Ar file
.Op Fl P Ar type
.Ar pkg-name Op Ar ...
.Ek
.Sh DESCRIPTION
The
.Nm
command is used to install packages created
with the
.Xr pkg_create 1
command.
Selected packages containing pre-compiled applications from the
.Pa /usr/ports
tree can be found on the
.Ox
FTP site or on the official
.Ox
CD.
.Bd -filled -offset indent
.Em Note :
System distribution files, e.g., base50.tgz, comp50.tgz, are
.Em not
packages and may not be installed using
.Nm .
.Ed
.Pp
.Nm
can be used to install new packages, to replace existing packages with other
flavors
.Po
option
.Fl r
.Pc
or to update packages to newer versions
.Po
option
.Fl u
.Pc .
.Pp
Details of packing-list internals are documented in
.Xr pkg_create 1 .
.Pp
.Nm
will
.Xr syslog 3
installations and updates by default
.Po
but see
.Xr pkg.conf 5
.Pc .
.Pp
.Nm
relies on the file system information being consistent.
In case of a system crash,
.Pa /var/db/pkg
may become corrupted.
Use
.Xr pkg_check 8
to repair things.
.Pp
If a package is digitally signed:
.Bl -bullet
.It
.Nm
checks that its packing-list is not corrupted and matches the cryptographic
signature stored within.
.It
.Nm
verifies that the signature was emitted by a valid user certificate, signed
by one of the authorities in
.Pa /etc/ssl/pkgca.pem
.It
.Nm
verifies that each file matches its sha256 checksum right after extraction,
before doing anything with it.
.It
.Nm
verifies that any dangerous mode or owner is registered in the packing-list.
.El
.Pp
In normal mode,
the package names given on the command lines are names of new packages that
.Nm
should install, without ever deinstalling existing packages.
.Pp
In replacement mode,
the package names given on the command lines are names of new packages that
.Nm
should install, possibly replacing existing installed packages.
.Pp
In update mode,
the package names given on the command lines are names of installed
packages, and
.Nm
should figure out newer package names for these, then replace the old
packages with the new.
.Pp
Each package name may be specified as a filename (which normally consists of the
package name itself plus the
.Dq .tgz
suffix) or a URL referring to FTP, HTTP, HTTPS, or SCP locations.
The following examples are valid:
.Pp
.Li pkg_add -v ftp://ftp.openbsd.org/pub/OpenBSD/2.7/packages/i386/m4-1.4.tgz
.Li pkg_add -v scp://login@host/usr/ports/packages/sparc/all/tcl-8.4.7.tgz
.Pp
If the given package names are not found in the current working directory,
.Nm
will search for them in each directory (local or remote) named by the
.Ev PKG_PATH
environment variable.
If
.Ev PKG_PATH
is not defined,
.Nm
will use the path named by
.Ar installpath
within
.Xr pkg.conf 5 .
Specifying
.Ql -
as a package name causes
.Nm
to read from the standard input.
.Pp
.Nm
also understands
.Sq stems ,
that is, package names without any version specification.
For instance, with
.Li pkg_add kdelibs ,
.Nm
will look in the current directory (or the PKG_PATH) for a kdelibs package.
.Pp
.Nm
may ask questions in interactive mode, or error out otherwise.
Interactive mode is the default on a tty, see
options
.Fl I/i .
.Pp
For instance
.Li pkg_add screen
is ambiguous as it matches screen-4.02  and screen-4.02-static.
.Pp
To avoid ambiguities,
.Nm
supports
.Sq stems with flavors ,
that is, a stem separated from flavors with a double dash.
For instance, the previous ambiguity could be resolved by using
.Li pkg_add screen--
(matches only the normal flavor)
or
.Li pkg_add screen--static
(matches only the static flavor).
.Pp
If the environment variable
.Ev PKG_CACHE
is set to a directory name, every package retrieved from a distant location
will also be copied here.
.Pp
Some packages may depend on other packages.
When resolving dependencies
.Nm
will first look at already installed packages, then match
dependencies with the list of packages left to install, then ask the
user's opinion in interactive mode,
then install default packages that satisfy the dependencies.
.Pp
Alternatively, it is possible to add packages interactively from within the
.Xr ftp 1
client,
in which case setting
.Ev PKG_PATH
correctly will be necessary for any dependency to be found out and retrieved
the same way.
For example, the following works:
.Bd -literal -offset indent
$ ftp ftp://ftp.openbsd.org/pub/OpenBSD/2.7/packages/i386/
250 CWD command successful
ftp> ls m*
227 Entering Passive Mode (129,128,5,191,164,73)
150 Opening ASCII mode data connection for m*.
m4-1.4.tgz
metamail-2.7.tgz
mh-6.8.4.tgz
mm-1.0.12.tgz
mpeg_lib-1.2.1.tgz
mpeg_play-2.4.tgz
mpg123-0.59q.tgz
mutt-0.95.7i.tgz
226 Transfer complete.
ftp> get m4-1.4.tgz "|pkg_add -v -"
.Ed
.Pp
.Sy Warning:
Since the
.Nm
command may execute scripts or programs contained within a package file,
your system may be susceptible to
.Dq trojan horses
or other subtle attacks from miscreants who create dangerous packages.
Be sure the specified package(s) are from trusted sources.
.Pp
The options are as follows:
.Bl -tag -width keyword
.It Fl A Ar arch
Assume
.Ar arch
as current machine architecture for any package tests.
.It Fl a
Automated package installation; do not record packages as installed manually.
.It Fl aa
Force already installed packages to be tagged as installed automatically.
.It Fl B Ar pkg-destdir
Set
.Ar pkg-destdir
as the prefix to prepend to any object extracted from the package.
.It Fl c
While replacing packages, delete extra configuration file in the old package,
mentioned as
.Dl @extra file
in the packing-list.
.It Xo
.Fl D
.Ar name Ns Op = Ns Ar value
.Xc
Force installation of the package.
.Ar name
is a keyword that states what failsafe
should be waived.
Recognized keywords include:
.Pp
.Bl -tag -width "updatedependsXX" -compact
.It Ar allversions
do not trim older p* variants of packages for updates.
.It Ar arch
architecture recorded in package may not match.
.It Ar dontmerge
by default, if dependencies are too strict,
.Nm
will merge updates together to make sure everything stays in sync.
.Fl D Ar dontmerge
disables that behavior.
.It Ar donttie
by default,
.Nm
will try to find new files in old packages by comparing the stored sha256,
and tie the entries together to avoid extracting files needlessly.
.Fl D Ar donttie
disables that behavior.
.It Ar downgrade
don't filter out package versions older than what's currently installed.
.It Ar FW_UPDATE
set by
.Xr fw_update 1
to separate firmware from normal packages.
.It Ar installed
in update mode, reinstall an existing package with the same update signature.
.It Ar libdepends
library specifications may not be fulfilled.
.It Ar nonroot
install even if not running as root.
.It Ar nosig
do not check digital signatures.
Still displays a very prominent message if a signature is found.
.It Ar paranoid
very safe update: don't run any @exec/@unexec.
.It Ar repair
attempt to repair installed packages with missing registration data.
.It Ar scripts
external scripts may fail.
.It Ar SIGNER
list of trusted signers, separated by commas.
Corresponds to list of public keys under
.Pa /etc/signify
we want to trust.
Defaults to any key matching
.Sq *pkg
for packages, and any key matching
.Sq *fw
for firmware.
.It Ar unsigned
allow the installation of unsigned packages without warnings/errors
(necessary for
.Xr ports 7 ,
automatically set by the build infrastructure).
.It Ar updatedepends
force update even if forward dependencies no longer match.
.El
.It Fl I
Force non-interactive mode.
Default is to be interactive when run from a tty.
.It Fl i
Force interactive mode, even if not run from a tty.
.Nm
may ask questions to the user if faced with difficult decisions.
.It Fl L Ar localbase
Install a package under
.Ar localbase .
By default,
.Ar localbase
equals
.Pa /usr/local ,
and specifying it is not necessary.
However, packages can be created using a different
.Ar localbase
.Po
see
.Xr pkg_create 1
.Pc ,
and those packages can only be installed by using the same
.Ar localbase .
See
.Xr bsd.port.mk 5
for a description of
.Ev LOCALBASE .
.It Fl l Ar file
Installs packages from the raw output of
.Xr pkg_info 1 ,
as saved in
.Ar file .
Generally, use with
.Li pkg_info -m \*(Gtfile ,
to reproduce an installation from machine to machine.
With
.Fl z
and
.Fl l
.Nm
will try its best to reproduce the installation, even if the
version numbers don't quite match and even if some packages cannot
be found.
.It Fl m
Causes
.Nm
to always display the progress meter in cases it would not do so by default.
.It Fl n
Don't actually install a package, just report the steps that
would be taken if it was.
Will still copy packages to
.Ev PKG_CACHE
if applicable.
.It Fl P Ar type
Check permissions for distribution, where
.Ar type
can be
.Sq cdrom
or
.Sq ftp .
.It Fl q
Replace package quickly; do not bother with checksums before removing normal
files.
If used twice,
it will not bother with checksums for configuration files either.
.It Fl r
Replace existing packages.
.Nm
will try to take every precaution to make sure the replacement can
proceed before removing the old package and adding the new one, and it
should also handle shared libraries correctly.
Among other things,
.Nm
will refuse to replace packages as soon as it needs to run scripts that
might fail
.Po
use
.Fl D Ar update
to force the replacement
.Pc ;
.Nm
will also refuse to replace packages when the dependencies don't quite
match
.Po
use
.Fl D Ar updatedepends
to force the replacement
.Pc .
.It Fl s
Don't actually install packages, skip as many steps as needed and report
only the disk size changes that would happen.
Similar to
.Fl n ,
except it also skips fetching full packages and stops at getting the
information it needs.
.It Fl U
Update dependencies if required before installing the new package(s).
.It Fl u
Update the given installed
.Ar pkgname(s) ,
and anything it depends upon.
If no
.Ar pkgname
is given,
.Nm
will update all installed packages.
This relies on
.Ev PKG_PATH
to figure out the new package names.
.It Fl v
Turn on verbose output.
Several
.Fl v
turn on more verbose output.
By default,
.Nm
is almost completely silent, but it reacts to keyboard status requests
.Po
see
.Xr stty 1
.Pc .
.Fl v
turns on basic messages,
.Fl vv
adds relevant system operations,
.Fl vvv
shows most internal computations apart from individual file/directory
additions,
.Fl vvvv
also shows dependencies adjustments, and
.Fl vvvvv
shows everything.
.It Fl x
Disable progress meter.
.It Fl z
Fuzzy package addition:
.Nm
should do its best to match package names passed on the command line,
even if the versions don't match and it will proceed even if
some packages can't be found.
.El
.Pp
By default, when adding packages via FTP, the
.Xr ftp 1
program operates in
.Dq passive
mode.
If you wish to use active mode instead, set the
.Ev FTPMODE
environment variable to
.Dq active .
If
.Nm
consistently fails to fetch a package from a site known to work,
it may be because the site does not support
passive mode FTP correctly.
This is very rare since
.Nm
will try active mode FTP if the server refuses a passive mode
connection.
.Ss Manual installation
.Nm
differentiates between packages specified on the command line, and packages
installed automatically because of inter-dependencies:
the first kind will be tagged as
.Sq installed manually .
The
.Fl a
option is used internally by the
.Xr ports 7
infrastructure
and
.Xr dpb 1
to handle dependencies.
.Pp
It is also possible to tweak the
.Sq installed manually
status of a package after the fact.
Running
.Nm
on an already installed package will tag it as
.Sq installed manually ,
even if it was already there as a dependency of something else,
and doubling the
.Fl a
option will remove the
.Sq installed manually
tag from installed packages.
.Pp
.Xr pkg_info 1
can be used to show only manually-installed packages, and
.Xr pkg_delete 1
can be used to remove dependencies when they are no longer needed.
.Ss Technical details
.Nm
deals with
.Sq updatesets
internally.
An updateset is a collection of old package(s) to delete, and new package(s)
to install, as an atomic operation.
Under normal circumstances, an updateset contains at most one old package
and one new package, but some situations may require
.Nm
to perform several installations/deletions at once.
.Pp
For each new package in an updateset,
.Nm
extracts the package's
.Dq packing information
(the packing-list, description, and installation/deinstallation scripts)
into a special staging directory in
.Pa /var/tmp
(or
.Ev PKG_TMPDIR
if set)
and then runs through the following sequence to fully extract the contents
of the package:
.Bl -enum
.It
A check is made to determine if the package is already recorded as installed.
If it is,
the installation is terminated.
.It
A check is made to determine if the package conflicts (from
.Cm @conflict
directives; see
.Xr pkg_create 1 )
with a package already recorded as installed.
In non-replacement mode, its installation is terminated.
.It
For packages tagged with architecture constraints,
.Nm
verifies that the current machine architecture agrees with the constraints.
.It
All package dependencies (from
.Cm @depend
and
.Cm @wantlib
directives; see
.Xr pkg_create 1 )
are read from the packing-list.
If any of these dependencies are not currently fulfilled,
an attempt is made to find a package that meets them and install it,
looking first in the current updateset, then in the list of packages
to install passed to
.Nm ;
if no adequate package can be found and installed,
the installation is terminated.
.It
.Nm
checks for collisions with installed file names, read-only file systems,
and enough space to store files.
.It
The packing-list is used as a guide for extracting
files from the package into their final locations.
.It
After installation is complete, a copy of all package files
such as the packing-list, extra messages, or
the description file is made into
.Pa /var/db/pkg/<pkg-name>
for subsequent possible use by
.Xr pkg_delete 1
and
.Xr pkg_info 1 .
Any package dependencies are recorded in the other packages'
.Pa /var/db/pkg/<other-pkg>/+REQUIRED_BY
file
(if the environment variable
.Ev PKG_DBDIR
is set, this overrides the
.Pa /var/db/pkg/
path shown above).
.It
Finally, the staging area is deleted and the program terminates.
.El
.Pp
Note that it is safe to interrupt
.Nm pkg_add
through
.Dv SIGINT ,
.Dv SIGHUP ,
and other signals, as it will safely record an interrupted install as
.Pa partial-<pkgname>[.n] .
.Pp
When replacing packages, the procedure is slightly different.
.Bl -enum
.It
A check is made to determine if a similar package is already installed.
If so, its full update signature is computed, which contains all the
necessary dependency information along with the actual package version.
If that signature is identical to that of the new package, no replacement
is performed (unless -D installed is specified).
.It
A check is made to determine what old package(s) the new package(s) should
replace, using conflicts.
.Nm
will attempt to update those packages.
If they update to the new package(s), nothing needs to be done.
If they're part of the list of updatesets to install, the corresponding
updatesets will be merged.
Otherwise,
.Nm
will add them to the current updateset, and rerun update to find suitable
update to those packages.
.It
A check is made to determine whether the old packages will be deleted without
issue, and whether the new packages will install correctly.
This includes refusing to run any code (unless -D update), and verifying
that the new package still matches dependencies (unless -D updatedepends).
.It
Shared libraries deserve special treatment: each shared library from the old
packages that does no longer exist in the new packages, but that is required
from a wantlib of another package is kept along in a stub package named
.Pa \&.libs-<pkgname> .
.It
The new packages are extracted to the filesystem, using temporary filenames
of the form
.Pa pkg.XXXXXXX
since the old packages are still there.
The packing-list is amended to record these names as @temp annotations,
in cases the installation fails.
.It
The old packages are deleted as usual, except that some packages may still
depend on them.
Note also that
.Cm @unexec-delete
commands are not executed.
.It
The new packages are installed as usual, except that the files are already
present and only need to be renamed.
Note also that
.Cm @exec-add
commands are not executed.
.It
Dependencies from the old packages are adjusted to point to the correct new
package.
.El
.Pp
To update packages in -u mode,
.Nm
performs the following steps.
.Bl -enum
.It
Each package name is reduced to its stem, and every package name with matching
stem available through
.Ev PKG_PATH
is considered as an update candidate.
.It
.Nm
searches for a
.Sq quirks
package first, which may contain exceptions to these rules.
This special package contains global information, such as packages that
can be deleted because they're now part of base, or stem changes.
.It
Version matching occurs: unless -D downgrade, only packages with newer
versions will be considered as update candidates.
Note that version matching is costly, thus
.Ev PKG_PATH
should point to a snapshot of packages for a given version of
.Ox ,
similar to the organization on the FTP sites.
.It
Candidates are then matched according to their pkgpaths
.Po
see
.Xr pkgpath 7
and
.Xr pkg_create 1
.Pc
in order to weed out similar packages with distinct options.
.It
The update signature of the candidate is compared to the signature of the
already installed package: identical signatures mean no update needed.
.It
If several candidates are left,
.Nm
will ask the user in interactive mode, and not perform the update in
non-interactive mode.
.It
Once a suitable update candidate has been found,
.Nm
checks the package dependencies.
If necessary, it will install or update them first.
Once all dependencies are up-to-date,
.Nm
will update the package.
.El
.Sh ENVIRONMENT
.Bl -tag -width PKG_DESTDIR
.It Ev FTPMODE
Specifies whether
.Xr ftp 1
should operate in
.Dq active
or
.Dq passive
mode.
The default is
.Dq passive .
.It Ev FETCH_CMD
Override use of
.Xr ftp 1 .
Must point to a command that understands
.Li ${FETCH_CMD} -o - url .
.It Ev FTP_KEEPALIVE
Have
.Xr ftp 1
send a byte after every
.Ev FTP_KEEPALIVE
seconds,
so that incorrectly configured network equipment won't aggressively drop it.
See
.Dq ftp -k
for more information.
.It Ev PKG_DBDIR
Where to register packages instead of
.Pa /var/db/pkg .
.It Ev PKG_DESTDIR
Value for
.Ar pkg-destdir ,
if no
.Fl B
option is specified.
.It Ev PKG_CACHE
If set, any package retrieved from a distant location will be copied to
that directory as well.
.It Ev PKG_PATH
If a given package name cannot be found,
the directories named by
.Ev PKG_PATH
are searched.
It should contain a series of entries separated by colons.
Each entry consists of a directory name.
URL schemes such as FTP, HTTP, HTTPS, or SCP are also appropriate.
The current directory may be indicated
implicitly by an empty directory name, or explicitly by a single
period
.Pq Ql \&./ .
Special sequences
.Sq %a ,
.Sq %c ,
.Sq %m ,
.Sq %v
will be expanded with the same semantics as
.Ar installpath
in
.Xr pkg.conf 5 .
.It Ev PKG_TMPDIR
Temporary area where package information files will be extracted, instead of
.Pa /var/tmp .
.El
.Sh SEE ALSO
.Xr ftp 1 ,
.Xr pkg_create 1 ,
.Xr pkg_delete 1 ,
.Xr pkg_info 1 ,
.Xr OpenBSD::Intro 3p ,
.Xr bsd.port.mk 5 ,
.Xr package 5 ,
.Xr pkg.conf 5 ,
.Xr pkg_check 8
.Sh AUTHORS
.Bl -tag -width indent -compact
.It An Jordan Hubbard
Initial design.
.It An Marc Espie
Complete rewrite.
.El