Update to libX11 1.6.0

1 files changed, 72 insertions, 30 deletions

diff --git a/lib/libX11/aclocal.m4 b/lib/libX11/aclocal.m4
index 65ecf24d6..07dc99ee1 100644
--- a/lib/libX11/aclocal.m4
+++ b/lib/libX11/aclocal.m4
@@ -20,6 +20,7 @@ If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 'autoreconf'.])])
 
 # pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
 # 
 # Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
 #
@@ -46,8 +47,12 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
 # ----------------------------------
 AC_DEFUN([PKG_PROG_PKG_CONFIG],
 [m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
 if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
 	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
 fi
@@ -60,7 +65,6 @@ if test -n "$PKG_CONFIG"; then
 		AC_MSG_RESULT([no])
 		PKG_CONFIG=""
 	fi
-		
 fi[]dnl
 ])# PKG_PROG_PKG_CONFIG
 
@@ -69,34 +73,32 @@ fi[]dnl
 # Check to see whether a particular set of modules exists.  Similar
 # to PKG_CHECK_MODULES(), but does not set variables or print errors.
 #
-#
-# Similar to PKG_CHECK_MODULES, make sure that the first instance of
-# this or PKG_CHECK_MODULES is called, or make sure to call
-# PKG_CHECK_EXISTS manually
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
 # --------------------------------------------------------------
 AC_DEFUN([PKG_CHECK_EXISTS],
 [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
 if test -n "$PKG_CONFIG" && \
     AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-  m4_ifval([$2], [$2], [:])
+  m4_default([$2], [:])
 m4_ifvaln([$3], [else
   $3])dnl
 fi])
 
-
 # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
 # ---------------------------------------------
 m4_define([_PKG_CONFIG],
-[if test -n "$PKG_CONFIG"; then
-    if test -n "$$1"; then
-        pkg_cv_[]$1="$$1"
-    else
-        PKG_CHECK_EXISTS([$3],
-                         [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-			 [pkg_failed=yes])
-    fi
-else
-	pkg_failed=untried
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
 fi[]dnl
 ])# _PKG_CONFIG
 
@@ -138,16 +140,17 @@ and $1[]_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.])
 
 if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
         _PKG_SHORT_ERRORS_SUPPORTED
         if test $_pkg_short_errors_supported = yes; then
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
         else 
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
 
-	ifelse([$4], , [AC_MSG_ERROR(dnl
+	m4_default([$4], [AC_MSG_ERROR(
 [Package requirements ($2) were not met:
 
 $$1_PKG_ERRORS
@@ -155,28 +158,67 @@ $$1_PKG_ERRORS
 Consider adjusting the PKG_CONFIG_PATH environment variable if you
 installed software in a non-standard prefix.
 
-_PKG_TEXT
-])],
-		[AC_MSG_RESULT([no])
-                $4])
+_PKG_TEXT])[]dnl
+        ])
 elif test $pkg_failed = untried; then
-	ifelse([$4], , [AC_MSG_FAILURE(dnl
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
 [The pkg-config script could not be found or is too old.  Make sure it
 is in your PATH or set the PKG_CONFIG environment variable to the full
 path to pkg-config.
 
 _PKG_TEXT
 
-To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.])],
-		[$4])
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
 else
 	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
 	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
         AC_MSG_RESULT([yes])
-	ifelse([$3], , :, [$3])
+	$3
 fi[]dnl
 ])# PKG_CHECK_MODULES
 
+
+# PKG_INSTALLDIR(DIRECTORY)
+# -------------------------
+# Substitutes the variable pkgconfigdir as the location where a module
+# should install pkg-config .pc files. By default the directory is
+# $libdir/pkgconfig, but the default can be changed by passing
+# DIRECTORY. The user can override through the --with-pkgconfigdir
+# parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+    [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+]) dnl PKG_INSTALLDIR
+
+
+# PKG_NOARCH_INSTALLDIR(DIRECTORY)
+# -------------------------
+# Substitutes the variable noarch_pkgconfigdir as the location where a
+# module should install arch-independent pkg-config .pc files. By
+# default the directory is $datadir/pkgconfig, but the default can be
+# changed by passing DIRECTORY. The user can override through the
+# --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+    [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+]) dnl PKG_NOARCH_INSTALLDIR
+
 # Copyright (C) 2002-2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation