diff options
Diffstat (limited to 'app/xgamma')
| -rw-r--r-- | app/xgamma/INSTALL | 236 | ||||
| -rw-r--r-- | app/xgamma/compile | 147 | ||||
| -rw-r--r-- | app/xgamma/config.guess | 614 | ||||
| -rw-r--r-- | app/xgamma/config.sub | 189 | ||||
| -rw-r--r-- | app/xgamma/depcomp | 103 | ||||
| -rw-r--r-- | app/xgamma/install-sh | 477 | ||||
| -rw-r--r-- | app/xgamma/missing | 142 | ||||
| -rw-r--r-- | app/xgamma/mkinstalldirs | 89 |
8 files changed, 1279 insertions, 718 deletions
diff --git a/app/xgamma/INSTALL b/app/xgamma/INSTALL index e69de29bb..23e5f25d0 100644 --- a/app/xgamma/INSTALL +++ b/app/xgamma/INSTALL @@ -0,0 +1,236 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free +Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + +These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + +You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. + +Installation Names +================== + +By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + +Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + +Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). Here is a another example: + + /bin/bash ./configure CONFIG_SHELL=/bin/bash + +Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent +configuration-related scripts to be executed by `/bin/bash'. + +`configure' Invocation +====================== + +`configure' recognizes the following options to control how it operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/app/xgamma/compile b/app/xgamma/compile index 9bb997a6a..1b1d23216 100644 --- a/app/xgamma/compile +++ b/app/xgamma/compile @@ -1,8 +1,9 @@ #! /bin/sh - # Wrapper for compilers which do not understand `-c -o'. -# Copyright 1999, 2000 Free Software Foundation, Inc. +scriptversion=2005-05-14.22 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # Written by Tom Tromey <tromey@cygnus.com>. # # This program is free software; you can redistribute it and/or modify @@ -17,83 +18,125 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. -# Usage: -# compile PROGRAM [ARGS]... -# `-o FOO.o' is removed from the args passed to the actual compile. +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. -prog=$1 -shift +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; +esac ofile= cfile= -args= -while test $# -gt 0; do - case "$1" in - -o) - # configure might choose to run compile as `compile cc -o foo foo.c'. - # So we do something ugly here. - ofile=$2 - shift - case "$ofile" in - *.o | *.obj) - ;; - *) - args="$args -o $ofile" - ofile= - ;; - esac - ;; - *.c) - cfile=$1 - args="$args $1" - ;; - *) - args="$args $1" - ;; - esac - shift +eat= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we strip `-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift done if test -z "$ofile" || test -z "$cfile"; then - # If no `-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # `.c' file was seen then we are probably linking. That is also - # ok. - exec "$prog" $args + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" fi # Name of file we expect compiler to create. -cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'` +cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` # Create the lock directory. # Note: use `[/.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. -lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d +lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d while true; do - if mkdir $lockdir > /dev/null 2>&1; then - break - fi - sleep 1 + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir $lockdir; exit 1" 1 2 15 +trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. -"$prog" $args -status=$? +"$@" +ret=$? if test -f "$cofile"; then - mv "$cofile" "$ofile" + mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + mv "${cofile}bj" "$ofile" fi -rmdir $lockdir -exit $status +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/app/xgamma/config.guess b/app/xgamma/config.guess index 2fc3acce2..917bbc50f 100644 --- a/app/xgamma/config.guess +++ b/app/xgamma/config.guess @@ -1,9 +1,9 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2003-06-17' +timestamp='2005-07-08' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -17,13 +17,15 @@ timestamp='2003-06-17' # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. + # Originally written by Per Bothner <per@bothner.com>. # Please send patches to <config-patches@gnu.org>. Submit a context # diff and a properly formatted ChangeLog entry. @@ -53,7 +55,7 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -66,11 +68,11 @@ Try \`$me --help' for more information." while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; + echo "$timestamp" ; exit ;; --version | -v ) - echo "$version" ; exit 0 ;; + echo "$version" ; exit ;; --help | --h* | -h ) - echo "$usage"; exit 0 ;; + echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -123,7 +125,7 @@ case $CC_FOR_BUILD,$HOST_CC,$CC in ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' +esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -136,13 +138,6 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -## for Red Hat Linux -if test -f /etc/redhat-release ; then - VENDOR=redhat ; -else - VENDOR= ; -fi - # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in @@ -203,50 +198,29 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + exit ;; *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then + case $UNAME_RELEASE in + *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU @@ -284,42 +258,49 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac + # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha*:OpenVMS:*:*) - echo alpha-hp-vms - exit 0 ;; + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix - exit 0 ;; + exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 - exit 0 ;; + exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 - exit 0;; + exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; + exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; + exit ;; *:OS/390:*:*) echo i370-ibm-openedition - exit 0 ;; + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp - exit 0;; + exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then @@ -327,32 +308,32 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in else echo pyramid-pyramid-bsd fi - exit 0 ;; + exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 - exit 0 ;; + exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 - exit 0 ;; - DRS?6000:UNIX_SV:4.2*:7*) + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7 && exit 0 ;; + sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) @@ -361,10 +342,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; + exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 @@ -376,10 +357,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in echo sparc-sun-sunos${UNAME_RELEASE} ;; esac - exit 0 ;; + exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; + exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor @@ -390,37 +371,40 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; + exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 - exit 0 ;; + exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; + exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; + exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -444,32 +428,33 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in exit (-1); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c \ - && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; + exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax - exit 0 ;; + exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax - exit 0 ;; + exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix - exit 0 ;; + exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 - exit 0 ;; + exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 - exit 0 ;; + exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` @@ -485,29 +470,29 @@ EOF else echo i586-dg-dgux${UNAME_RELEASE} fi - exit 0 ;; + exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 - exit 0 ;; + exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 - exit 0 ;; + exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 - exit 0 ;; + exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd - exit 0 ;; + exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; + exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix - exit 0 ;; + exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` @@ -515,7 +500,7 @@ EOF IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build @@ -530,14 +515,18 @@ EOF exit(0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 - echo rs6000-ibm-aix3.2.5 + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi - exit 0 ;; + exit ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then @@ -551,28 +540,28 @@ EOF IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; + exit ;; *:AIX:*:*) echo rs6000-ibm-aix - exit 0 ;; + exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 - exit 0 ;; + exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 + exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx - exit 0 ;; + exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 - exit 0 ;; + exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd - exit 0 ;; + exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 - exit 0 ;; + exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in @@ -634,9 +623,19 @@ EOF esac if [ ${HP_ARCH} = "hppa2.0w" ] then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else @@ -644,11 +643,11 @@ EOF fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; + exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -676,150 +675,166 @@ EOF exit (0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 - exit 0 ;; + exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd - exit 0 ;; + exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd - exit 0 ;; + exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix - exit 0 ;; + exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf - exit 0 ;; + exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf - exit 0 ;; + exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi - exit 0 ;; + exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites - exit 0 ;; + exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit 0 ;; + exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit 0 ;; + exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit 0 ;; + exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit 0 ;; + exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + exit ;; *:UNICOS/mp:*:*) - echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; + exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) - # Determine whether the default compiler uses glibc. - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <features.h> - #if __GLIBC__ >= 2 - LIBC=gnu - #else - LIBC= - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} - exit 0 ;; + exit ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; + exit ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; + exit ;; x86:Interix*:[34]*) echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit 0 ;; + exit ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks - exit 0 ;; + exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix - exit 0 ;; + exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; + exit ;; + amd64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin - exit 0 ;; + exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; + exit ;; *:GNU:*:*) + # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; + exit ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu - exit 0 ;; + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c @@ -837,7 +852,7 @@ EOF #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build @@ -856,14 +871,14 @@ EOF #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; ppc:Linux:*:*) - echo powerpc-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo powerpc-unknown-linux-gnu + exit ;; ppc64:Linux:*:*) - echo powerpc64-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo powerpc64-unknown-linux-gnu + exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; @@ -877,7 +892,7 @@ EOF objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; + exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in @@ -885,25 +900,25 @@ EOF PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac - exit 0 ;; + exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu - exit 0 ;; + exit ;; s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-${VENDOR:-ibm}-linux-gnu - exit 0 ;; + echo ${UNAME_MACHINE}-ibm-linux + exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; + exit ;; x86_64:Linux:*:*) - echo x86_64-${VENDOR:-unknown}-linux-gnu - exit 0 ;; + echo x86_64-unknown-linux-gnu + exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -921,15 +936,15 @@ EOF ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; + exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; + exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; + exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build @@ -952,17 +967,23 @@ EOF LIBC=gnuaout #endif #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-${VENDOR:-pc}-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 - exit 0 ;; + exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... @@ -970,24 +991,27 @@ EOF # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; + exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; + exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; + exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then @@ -995,15 +1019,16 @@ EOF else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi - exit 0 ;; - i*86:*:5:[78]*) + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; + exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` @@ -1021,73 +1046,73 @@ EOF else echo ${UNAME_MACHINE}-pc-sysv32 fi - exit 0 ;; + exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp - exit 0 ;; + exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 - exit 0 ;; + exit ;; paragon:*:*:*) echo i860-intel-osf1 - exit 0 ;; + exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi - exit 0 ;; + exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv - exit 0 ;; + exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv - exit 0 ;; + exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; + && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 - exit 0 ;; + exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; + exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; + exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 - exit 0 ;; + exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` @@ -1095,68 +1120,73 @@ EOF else echo ns32k-sni-sysv fi - exit 0 ;; + exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says <Richard.M.Bartel@ccMail.Census.GOV> echo i586-unisys-sysv4 - exit 0 ;; + exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes <hewes@openmarket.com>. # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 - exit 0 ;; + exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 - exit 0 ;; + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos - exit 0 ;; + exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; + exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 - exit 0 ;; + exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi - exit 0 ;; + exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos - exit 0 ;; + exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos - exit 0 ;; + exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos - exit 0 ;; + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} - exit 0 ;; + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Darwin:*:*) - case `uname -p` in + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in *86) UNAME_PROCESSOR=i686 ;; - powerpc) UNAME_PROCESSOR=powerpc ;; + unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit 0 ;; + exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then @@ -1164,22 +1194,25 @@ EOF UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; + exit ;; *:QNX:*:4*) echo i386-pc-qnx - exit 0 ;; - NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; + exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux - exit 0 ;; + exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv - exit 0 ;; + exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; + exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 @@ -1190,28 +1223,44 @@ EOF UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; + exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 - exit 0 ;; + exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex - exit 0 ;; + exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 - exit 0 ;; + exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 - exit 0 ;; + exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 - exit 0 ;; + exit ;; *:ITS:*:*) echo pdp10-unknown-its - exit 0 ;; + exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} - exit 0 ;; + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1243,7 +1292,7 @@ main () #endif #if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); + printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) @@ -1332,11 +1381,12 @@ main () } EOF -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) @@ -1345,22 +1395,22 @@ then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd - exit 0 ;; + exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit 0 ;; + exit ;; c34*) echo c34-convex-bsd - exit 0 ;; + exit ;; c38*) echo c38-convex-bsd - exit 0 ;; + exit ;; c4*) echo c4-convex-bsd - exit 0 ;; + exit ;; esac fi @@ -1371,7 +1421,9 @@ This script, last modified $timestamp, has failed to recognize the operating system you are using. It is advised that you download the most up to date version of the config scripts from - ftp://ftp.gnu.org/pub/gnu/config/ + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess +and + http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub If the version you run ($0) is already up to date, please send the following data and any information you think might be diff --git a/app/xgamma/config.sub b/app/xgamma/config.sub index 7cee3d6ec..1c366dfde 100644 --- a/app/xgamma/config.sub +++ b/app/xgamma/config.sub @@ -1,9 +1,9 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2003-06-18' +timestamp='2005-07-08' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -21,14 +21,15 @@ timestamp='2003-06-18' # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. + # Please send patches to <config-patches@gnu.org>. Submit a context # diff and a properly formatted ChangeLog entry. # @@ -70,7 +71,7 @@ Report bugs and patches to <config-patches@gnu.org>." version="\ GNU config.sub ($timestamp) -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -83,11 +84,11 @@ Try \`$me --help' for more information." while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; + echo "$timestamp" ; exit ;; --version | -v ) - echo "$version" ; exit 0 ;; + echo "$version" ; exit ;; --help | --h* | -h ) - echo "$usage"; exit 0 ;; + echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. @@ -99,7 +100,7 @@ while test $# -gt 0 ; do *local*) # First pass through any local machine types. echo $1 - exit 0;; + exit ;; * ) break ;; @@ -118,7 +119,8 @@ esac # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -144,7 +146,7 @@ case $os in -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis) + -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; @@ -228,14 +230,16 @@ case $basic_machine in | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ - | ip2k \ - | m32r | m68000 | m68k | m88k | mcore \ + | ip2k | iq2000 \ + | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ @@ -244,31 +248,37 @@ case $basic_machine in | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ + | ms1 \ | msp430 \ | ns16k | ns32k \ - | openrisc | or32 \ + | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | s390 | s390x \ - | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ - | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ - | x86 | xscale | xstormy16 | xtensa \ + | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; + m32c) + basic_machine=$basic_machine-unknown + ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown @@ -296,19 +306,19 @@ case $basic_machine in | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ - | bs2000-* \ + | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | cydra-* \ + | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* \ - | m32r-* \ + | ip2k-* | iq2000-* \ + | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | mcore-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ @@ -317,34 +327,40 @@ case $basic_machine in | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | ms1-* \ | msp430-* \ - | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ - | s390-* | s390x-* \ - | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ - | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ - | xtensa-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ | ymp-* \ | z8k-*) ;; + m32c-*) + ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) @@ -361,6 +377,9 @@ case $basic_machine in basic_machine=a29k-amd os=-udi ;; + abacus) + basic_machine=abacus-unknown + ;; adobe68k) basic_machine=m68010-adobe os=-scout @@ -378,6 +397,9 @@ case $basic_machine in amd64) basic_machine=x86_64-pc ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; amdahl) basic_machine=580-amdahl os=-sysv @@ -437,12 +459,27 @@ case $basic_machine in basic_machine=j90-cray os=-unicos ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; crds | unos) basic_machine=m68k-crds ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; da30 | da30-*) basic_machine=m68k-da30 ;; @@ -465,6 +502,10 @@ case $basic_machine in basic_machine=m88k-motorola os=-sysv3 ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx @@ -643,10 +684,6 @@ case $basic_machine in mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; - mmix*) - basic_machine=mmix-knuth - os=-mmixware - ;; monitor) basic_machine=m68k-rom68k os=-coff @@ -727,10 +764,6 @@ case $basic_machine in np1) basic_machine=np1-gould ;; - nv1) - basic_machine=nv1-cray - os=-unicosmp - ;; nsr-tandem) basic_machine=nsr-tandem ;; @@ -738,9 +771,12 @@ case $basic_machine in basic_machine=hppa1.1-oki os=-proelf ;; - or32 | or32-*) + openrisc | openrisc-*) basic_machine=or32-unknown - os=-coff + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson @@ -833,6 +869,12 @@ case $basic_machine in rtpc | rtpc-*) basic_machine=romp-ibm ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; sa29200) basic_machine=a29k-amd os=-udi @@ -956,6 +998,10 @@ case $basic_machine in tower | tower-32) basic_machine=m68k-ncr ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; udi29k) basic_machine=a29k-amd os=-udi @@ -999,6 +1045,10 @@ case $basic_machine in basic_machine=hppa1.1-winbond os=-proelf ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; xps | xps100) basic_machine=xps100-honeywell ;; @@ -1029,6 +1079,9 @@ case $basic_machine in romp) basic_machine=romp-ibm ;; + mmix) + basic_machine=mmix-knuth + ;; rs6000) basic_machine=rs6000-ibm ;; @@ -1045,13 +1098,10 @@ case $basic_machine in we32k) basic_machine=we32k-att ;; - sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; - sh64) - basic_machine=sh64-unknown - ;; - sparc | sparcv9 | sparcv9b) + sparc | sparcv8 | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) @@ -1124,19 +1174,21 @@ case $os in | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1154,12 +1206,15 @@ case $os in os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; @@ -1172,6 +1227,9 @@ case $os in -opened*) os=-openedition ;; + -os400*) + os=-os400 + ;; -wince*) os=-wince ;; @@ -1193,6 +1251,9 @@ case $os in -atheos*) os=-atheos ;; + -syllable*) + os=-syllable + ;; -386bsd) os=-bsd ;; @@ -1215,6 +1276,9 @@ case $os in -sinix*) os=-sysv4 ;; + -tpf*) + os=-tpf + ;; -triton*) os=-sysv3 ;; @@ -1251,6 +1315,9 @@ case $os in -kaos*) os=-kaos ;; + -zvmoe) + os=-zvmoe + ;; -none) ;; *) @@ -1282,9 +1349,9 @@ case $basic_machine in arm*-semi) os=-aout ;; - c4x-* | tic4x-*) - os=-coff - ;; + c4x-* | tic4x-*) + os=-coff + ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 @@ -1328,9 +1395,15 @@ case $basic_machine in *-be) os=-beos ;; + *-haiku) + os=-haiku + ;; *-ibm) os=-aix ;; + *-knuth) + os=-mmixware + ;; *-wec) os=-proelf ;; @@ -1463,9 +1536,15 @@ case $basic_machine in -mvs* | -opened*) vendor=ibm ;; + -os400*) + vendor=ibm + ;; -ptx*) vendor=sequent ;; + -tpf*) + vendor=ibm + ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; @@ -1490,7 +1569,7 @@ case $basic_machine in esac echo $basic_machine$os -exit 0 +exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff --git a/app/xgamma/depcomp b/app/xgamma/depcomp index edb5d38ef..04701da53 100644 --- a/app/xgamma/depcomp +++ b/app/xgamma/depcomp @@ -1,7 +1,9 @@ #! /bin/sh - # depcomp - compile a program generating dependencies as side-effects -# Copyright 1999, 2000, 2003 Free Software Foundation, Inc. + +scriptversion=2005-07-09.11 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -15,8 +17,8 @@ # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -25,22 +27,45 @@ # Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi -# `libtool' can also be set to `yes' or `no'. - -if test -z "$depfile"; then - base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` - dir=`echo "$object" | sed 's,/.*$,/,'` - if test "$dir" = "$object"; then - dir= - fi - # FIXME: should be _deps on DOS. - depfile="$dir.deps/$base" -fi +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" @@ -262,27 +287,43 @@ tru64) base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then - tmpdepfile1="$dir.libs/$base.lo.d" - tmpdepfile2="$dir.libs/$base.d" + # With Tru64 cc, shared objects can also be used to make a + # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else - tmpdepfile1="$dir$base.o.d" - tmpdepfile2="$dir$base.d" + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else - rm -f "$tmpdepfile1" "$tmpdepfile2" + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi - if test -f "$tmpdepfile1"; then - tmpdepfile="$tmpdepfile1" - else - tmpdepfile="$tmpdepfile2" - fi + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. @@ -426,7 +467,8 @@ cpp) done "$@" -E | - sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" @@ -477,3 +519,12 @@ none) esac exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/app/xgamma/install-sh b/app/xgamma/install-sh index 6ce63b9f7..4d4a9519e 100644 --- a/app/xgamma/install-sh +++ b/app/xgamma/install-sh @@ -1,7 +1,8 @@ #!/bin/sh -# # install - install a program, script, or datafile -# + +scriptversion=2005-05-14.22 + # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. @@ -41,13 +42,11 @@ # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. - # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" - # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" @@ -59,236 +58,266 @@ stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" -transformbasename="" -transform_arg="" -instcmd="$mvprog" chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" +chowncmd= +chgrpcmd= +stripcmd= rmcmd="$rmprog -f" mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd=$cpprog - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "$0: no input file specified" >&2 - exit 1 -else - : -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d "$dst" ]; then - instcmd=: - chmodcmd="" - else - instcmd=$mkdirprog - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f "$src" ] || [ -d "$src" ] - then - : - else - echo "$0: $src does not exist" >&2 - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "$0: no destination specified" >&2 - exit 1 - else - : - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d "$dst" ] - then - dst=$dst/`basename "$src"` - else - : - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' - ' -IFS="${IFS-$defaultIFS}" - -oIFS=$IFS -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS=$oIFS - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp=$pathcomp$1 +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 shift + shift + continue;; - if [ ! -d "$pathcomp" ] ; - then - $mkdirprog "$pathcomp" - else - : - fi - - pathcomp=$pathcomp/ + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd "$dst" && - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename "$dst"` - else - dstfile=`basename "$dst" $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename "$dst"` - else - : - fi - -# Make a couple of temp file names in the proper directory. - - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - -# Trap to clean up temp files at exit. - - trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 - trap '(exit $?); exit' 1 2 13 15 - -# Move or copy the file name to the temp name - - $doit $instcmd "$src" "$dsttmp" && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && - -# Now remove or move aside any old file at destination location. We try this -# two ways since rm can't unlink itself on some systems and the destination -# file might be busy for other reasons. In this case, the final cleanup -# might fail but the new file should still install successfully. - -{ - if [ -f "$dstdir/$dstfile" ] - then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || - $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || - { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit - } - else - : - fi -} && - -# Now rename the file to the real destination. +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac -fi && + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + shift + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit 1; } +done # The final little trick to "correctly" pass the exit status to the exit trap. - { - (exit 0); exit + (exit 0); exit 0 } + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/app/xgamma/missing b/app/xgamma/missing index fc54c64ec..894e786e1 100644 --- a/app/xgamma/missing +++ b/app/xgamma/missing @@ -1,6 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc. + +scriptversion=2005-06-08.21 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -15,8 +19,8 @@ # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -38,18 +42,24 @@ else configure_ac=configure.in fi +msg="missing on your system" + case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in -h|--h|--he|--hel|--help) echo "\ @@ -74,11 +84,15 @@ Supported PROGRAM values: lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake@gnu.org>." + exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing 0.4 - GNU automake" + echo "missing $scriptversion (GNU Automake)" + exit $? ;; -*) @@ -87,14 +101,44 @@ Supported PROGRAM values: exit 1 ;; - aclocal*) +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 fi + ;; +esac +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + aclocal*) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." @@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; autoconf) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." @@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; autoheader) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." @@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; automake*) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." @@ -156,14 +185,9 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; autom4te) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." @@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your bison|yacc) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." @@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system. You should only need it if lex|flex) echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." @@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; help2man) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." @@ -262,32 +281,30 @@ WARNING: \`$1' is missing on your system. You should only need it if ;; makeinfo) - if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then - # We have makeinfo, but it failed. - exit 1 - fi - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if +WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 touch $file ;; tar) shift - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error @@ -323,8 +340,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments. *) echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case @@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your esac exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/app/xgamma/mkinstalldirs b/app/xgamma/mkinstalldirs index d2d5f21b6..259dbfcd3 100644 --- a/app/xgamma/mkinstalldirs +++ b/app/xgamma/mkinstalldirs @@ -1,21 +1,33 @@ #! /bin/sh # mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman <friedman@prep.ai.mit.edu> + +scriptversion=2005-06-29.22 + +# Original author: Noah Friedman <friedman@prep.ai.mit.edu> # Created: 1993-05-16 -# Public domain +# Public domain. +# +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. errstatus=0 -dirmode="" +dirmode= usage="\ -Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." +Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... + +Create each directory DIR (with mode MODE, if specified), including all +leading file name components. + +Report bugs to <bug-automake@gnu.org>." # process command line arguments while test $# -gt 0 ; do case $1 in -h | --help | --h*) # -h for help - echo "$usage" 1>&2 - exit 0 + echo "$usage" + exit $? ;; -m) # -m PERM arg shift @@ -23,6 +35,10 @@ while test $# -gt 0 ; do dirmode=$1 shift ;; + --version) + echo "$0 $scriptversion" + exit $? + ;; --) # stop option processing shift break @@ -50,30 +66,58 @@ case $# in 0) exit 0 ;; esac +# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and +# mkdir -p a/c at the same time, both will detect that a is missing, +# one will create a, then the other will try to create a and die with +# a "File exists" error. This is a problem when calling mkinstalldirs +# from a parallel make. We use --version in the probe to restrict +# ourselves to GNU mkdir, which is thread-safe. case $dirmode in '') - if mkdir -p -- . 2>/dev/null; then + if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then echo "mkdir -p -- $*" exec mkdir -p -- "$@" + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + test -d ./-p && rmdir ./-p + test -d ./--version && rmdir ./--version fi ;; *) - if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && + test ! -d ./--version; then echo "mkdir -m $dirmode -p -- $*" exec mkdir -m "$dirmode" -p -- "$@" + else + # Clean up after NextStep and OpenStep mkdir. + for d in ./-m ./-p ./--version "./$dirmode"; + do + test -d $d && rmdir $d + done fi ;; esac for file do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + case $file in + /*) pathcomp=/ ;; + *) pathcomp= ;; + esac + oIFS=$IFS + IFS=/ + set fnord $file shift + IFS=$oIFS - pathcomp= for d do - pathcomp="$pathcomp$d" + test "x$d" = x && continue + + pathcomp=$pathcomp$d case $pathcomp in -*) pathcomp=./$pathcomp ;; esac @@ -84,21 +128,21 @@ do mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then - errstatus=$lasterr + errstatus=$lasterr else - if test ! -z "$dirmode"; then + if test ! -z "$dirmode"; then echo "chmod $dirmode $pathcomp" - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? + lasterr= + chmod "$dirmode" "$pathcomp" || lasterr=$? - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi fi fi - pathcomp="$pathcomp/" + pathcomp=$pathcomp/ done done @@ -107,5 +151,8 @@ exit $errstatus # Local Variables: # mode: shell-script # sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" # End: -# mkinstalldirs ends here |