diff options
Diffstat (limited to 'doc/gl-docs/GLU/Imakefile')
| -rw-r--r-- | doc/gl-docs/GLU/Imakefile | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/doc/gl-docs/GLU/Imakefile b/doc/gl-docs/GLU/Imakefile new file mode 100644 index 000000000..567dcafef --- /dev/null +++ b/doc/gl-docs/GLU/Imakefile @@ -0,0 +1,150 @@ +XCOMM $XFree86: xc/doc/man/GLU/Imakefile,v 1.2 2001/01/16 02:23:46 dawes Exp $ + +XCOMM License Applicability. Except to the extent portions of this file are +XCOMM made subject to an alternative license as permitted in the SGI Free +XCOMM Software License B, Version 1.1 (the "License"), the contents of this +XCOMM file are subject only to the provisions of the License. You may not use +XCOMM this file except in compliance with the License. You may obtain a copy +XCOMM of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +XCOMM Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +XCOMM +XCOMM http://oss.sgi.com/projects/FreeB +XCOMM +XCOMM Note that, as provided in the License, the Software is distributed on an +XCOMM "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +XCOMM DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +XCOMM CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +XCOMM PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +XCOMM +XCOMM Original Code. The Original Code is: OpenGL Sample Implementation, +XCOMM Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +XCOMM Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +XCOMM Copyright in any portions created by third parties is as indicated +XCOMM elsewhere herein. All Rights Reserved. +XCOMM +XCOMM Additional Notice Provisions: The application programming interfaces +XCOMM established by SGI in conjunction with the Original Code are The +XCOMM OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +XCOMM April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +XCOMM 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +XCOMM Window System(R) (Version 1.3), released October 19, 1998. This software +XCOMM was created using the OpenGL(R) version 1.2.1 Sample Implementation +XCOMM published by SGI, but has not been independently verified as being +XCOMM compliant with the OpenGL(R) version 1.2.1 Specification. +XCOMM + +MANDIR = $(LIBMANDIR) +MANSUFFIX = $(LIBMANSUFFIX) +MSUFF = man + +InstallManPage(gluBeginCurve,$(MANDIR)) +InstallManPageAliases(gluBeginCurve,$(MANDIR),gluEndCurve) +InstallManPage(gluBeginPolygon,$(MANDIR)) +InstallManPageAliases(gluBeginPolygon,$(MANDIR),gluEndPolygon) +InstallManPage(gluBeginSurface,$(MANDIR)) +InstallManPageAliases(gluBeginSurface,$(MANDIR),gluEndSurface) +InstallManPage(gluBeginTrim,$(MANDIR)) +InstallManPageAliases(gluBeginTrim,$(MANDIR),gluEndTrim) +InstallManPage(gluBuild1DMipmaps,$(MANDIR)) +InstallManPage(gluBuild2DMipmaps,$(MANDIR)) +InstallManPage(gluCylinder,$(MANDIR)) +InstallManPage(gluDeleteNurbsRenderer,$(MANDIR)) +InstallManPage(gluDeleteQuadric,$(MANDIR)) +InstallManPage(gluDeleteTess,$(MANDIR)) +InstallManPage(gluDisk,$(MANDIR)) +InstallManPage(gluErrorString,$(MANDIR)) +InstallManPage(gluGetNurbsProperty,$(MANDIR)) +InstallManPage(gluGetString,$(MANDIR)) +InstallManPage(gluGetTessProperty,$(MANDIR)) +InstallManPage(gluLoadSamplingMatrices,$(MANDIR)) +InstallManPage(gluLookAt,$(MANDIR)) +InstallManPage(gluNewNurbsRenderer,$(MANDIR)) +InstallManPage(gluNewQuadric,$(MANDIR)) +InstallManPage(gluNewTess,$(MANDIR)) +InstallManPage(gluNextContour,$(MANDIR)) +InstallManPage(gluNurbsCallback,$(MANDIR)) +InstallManPage(gluNurbsCallbackDataEXT,$(MANDIR)) +InstallManPage(gluNurbsCurve,$(MANDIR)) +InstallManPage(gluNurbsProperty,$(MANDIR)) +InstallManPage(gluNurbsSurface,$(MANDIR)) +InstallManPage(gluOrtho2D,$(MANDIR)) +InstallManPage(gluPartialDisk,$(MANDIR)) +InstallManPage(gluPerspective,$(MANDIR)) +InstallManPage(gluPickMatrix,$(MANDIR)) +InstallManPage(gluProject,$(MANDIR)) +InstallManPage(gluPwlCurve,$(MANDIR)) +InstallManPage(gluQuadricCallback,$(MANDIR)) +InstallManPage(gluQuadricDrawStyle,$(MANDIR)) +InstallManPage(gluQuadricNormals,$(MANDIR)) +InstallManPage(gluQuadricOrientation,$(MANDIR)) +InstallManPage(gluQuadricTexture,$(MANDIR)) +InstallManPage(gluScaleImage,$(MANDIR)) +InstallManPage(gluSphere,$(MANDIR)) +InstallManPage(gluTessBeginContour,$(MANDIR)) +InstallManPageAliases(gluTessBeginContour,$(MANDIR),gluTessEndContour) +InstallManPage(gluTessBeginPolygon,$(MANDIR)) +InstallManPage(gluTessCallback,$(MANDIR)) +InstallManPage(gluTessEndPolygon,$(MANDIR)) +InstallManPage(gluTessNormal,$(MANDIR)) +InstallManPage(gluTessProperty,$(MANDIR)) +InstallManPage(gluTessVertex,$(MANDIR)) +InstallManPage(gluUnProject,$(MANDIR)) + + +#if 0 +GLUMANDIR = $(OGLSAMPLESRCDIR)/main/doc/man/manglu/standard +GLUSUFFIX = gl +#else +GLUMANDIR = . +GLUSUFFIX = 3gl +#endif + + +LinkFile(gluBeginCurve.$(MSUFF), $(GLUMANDIR)/begincurve.$(GLUSUFFIX)) +LinkFile(gluBeginPolygon.$(MSUFF), $(GLUMANDIR)/beginpolygon.$(GLUSUFFIX)) +LinkFile(gluBeginSurface.$(MSUFF), $(GLUMANDIR)/beginsurface.$(GLUSUFFIX)) +LinkFile(gluBeginTrim.$(MSUFF), $(GLUMANDIR)/begintrim.$(GLUSUFFIX)) +LinkFile(gluBuild1DMipmaps.$(MSUFF), $(GLUMANDIR)/build1dmipmaps.$(GLUSUFFIX)) +LinkFile(gluBuild2DMipmaps.$(MSUFF), $(GLUMANDIR)/build2dmipmaps.$(GLUSUFFIX)) +LinkFile(gluCylinder.$(MSUFF), $(GLUMANDIR)/cylinder.$(GLUSUFFIX)) +LinkFile(gluDeleteNurbsRenderer.$(MSUFF), $(GLUMANDIR)/deletenurbsrenderer.$(GLUSUFFIX)) +LinkFile(gluDeleteQuadric.$(MSUFF), $(GLUMANDIR)/deletequadric.$(GLUSUFFIX)) +LinkFile(gluDeleteTess.$(MSUFF), $(GLUMANDIR)/deletetess.$(GLUSUFFIX)) +LinkFile(gluDisk.$(MSUFF), $(GLUMANDIR)/disk.$(GLUSUFFIX)) +LinkFile(gluErrorString.$(MSUFF), $(GLUMANDIR)/errorstring.$(GLUSUFFIX)) +LinkFile(gluGetNurbsProperty.$(MSUFF), $(GLUMANDIR)/getnurbsproperty.$(GLUSUFFIX)) +LinkFile(gluGetString.$(MSUFF), $(GLUMANDIR)/getstring.$(GLUSUFFIX)) +LinkFile(gluGetTessProperty.$(MSUFF), $(GLUMANDIR)/gettessproperty.$(GLUSUFFIX)) +LinkFile(gluLoadSamplingMatrices.$(MSUFF), $(GLUMANDIR)/loadsamplingmatrices.$(GLUSUFFIX)) +LinkFile(gluLookAt.$(MSUFF), $(GLUMANDIR)/lookat.$(GLUSUFFIX)) +LinkFile(gluNewNurbsRenderer.$(MSUFF), $(GLUMANDIR)/newnurbsrenderer.$(GLUSUFFIX)) +LinkFile(gluNewQuadric.$(MSUFF), $(GLUMANDIR)/newquadric.$(GLUSUFFIX)) +LinkFile(gluNewTess.$(MSUFF), $(GLUMANDIR)/newtess.$(GLUSUFFIX)) +LinkFile(gluNextContour.$(MSUFF), $(GLUMANDIR)/nextcontour.$(GLUSUFFIX)) +LinkFile(gluNurbsCallback.$(MSUFF), $(GLUMANDIR)/nurbscallback.$(GLUSUFFIX)) +LinkFile(gluNurbsCallbackDataEXT.$(MSUFF), $(GLUMANDIR)/nurbscallbackdataext.$(GLUSUFFIX)) +LinkFile(gluNurbsCurve.$(MSUFF), $(GLUMANDIR)/nurbscurve.$(GLUSUFFIX)) +LinkFile(gluNurbsProperty.$(MSUFF), $(GLUMANDIR)/nurbsproperty.$(GLUSUFFIX)) +LinkFile(gluNurbsSurface.$(MSUFF), $(GLUMANDIR)/nurbssurface.$(GLUSUFFIX)) +LinkFile(gluOrtho2D.$(MSUFF), $(GLUMANDIR)/ortho2d.$(GLUSUFFIX)) +LinkFile(gluPartialDisk.$(MSUFF), $(GLUMANDIR)/partialdisk.$(GLUSUFFIX)) +LinkFile(gluPerspective.$(MSUFF), $(GLUMANDIR)/perspective.$(GLUSUFFIX)) +LinkFile(gluPickMatrix.$(MSUFF), $(GLUMANDIR)/pickmatrix.$(GLUSUFFIX)) +LinkFile(gluProject.$(MSUFF), $(GLUMANDIR)/project.$(GLUSUFFIX)) +LinkFile(gluPwlCurve.$(MSUFF), $(GLUMANDIR)/pwlcurve.$(GLUSUFFIX)) +LinkFile(gluQuadricCallback.$(MSUFF), $(GLUMANDIR)/quadriccallback.$(GLUSUFFIX)) +LinkFile(gluQuadricDrawStyle.$(MSUFF), $(GLUMANDIR)/quadricdrawstyle.$(GLUSUFFIX)) +LinkFile(gluQuadricNormals.$(MSUFF), $(GLUMANDIR)/quadricnormals.$(GLUSUFFIX)) +LinkFile(gluQuadricOrientation.$(MSUFF), $(GLUMANDIR)/quadricorientation.$(GLUSUFFIX)) +LinkFile(gluQuadricTexture.$(MSUFF), $(GLUMANDIR)/quadrictexture.$(GLUSUFFIX)) +LinkFile(gluScaleImage.$(MSUFF), $(GLUMANDIR)/scaleimage.$(GLUSUFFIX)) +LinkFile(gluSphere.$(MSUFF), $(GLUMANDIR)/sphere.$(GLUSUFFIX)) +LinkFile(gluTessBeginContour.$(MSUFF), $(GLUMANDIR)/tessbegincontour.$(GLUSUFFIX)) +LinkFile(gluTessBeginPolygon.$(MSUFF), $(GLUMANDIR)/tessbeginpolygon.$(GLUSUFFIX)) +LinkFile(gluTessCallback.$(MSUFF), $(GLUMANDIR)/tesscallback.$(GLUSUFFIX)) +LinkFile(gluTessEndPolygon.$(MSUFF), $(GLUMANDIR)/tessendpolygon.$(GLUSUFFIX)) +LinkFile(gluTessNormal.$(MSUFF), $(GLUMANDIR)/tessnormal.$(GLUSUFFIX)) +LinkFile(gluTessProperty.$(MSUFF), $(GLUMANDIR)/tessproperty.$(GLUSUFFIX)) +LinkFile(gluTessVertex.$(MSUFF), $(GLUMANDIR)/tessvertex.$(GLUSUFFIX)) +LinkFile(gluUnProject.$(MSUFF), $(GLUMANDIR)/unproject.$(GLUSUFFIX)) + |