diff options
Diffstat (limited to 'xserver/include/displaymode.h')
-rw-r--r-- | xserver/include/displaymode.h | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/xserver/include/displaymode.h b/xserver/include/displaymode.h new file mode 100644 index 000000000..ad01b87ec --- /dev/null +++ b/xserver/include/displaymode.h @@ -0,0 +1,102 @@ +#ifdef HAVE_DIX_CONFIG_H +#include <dix-config.h> +#endif + +#ifndef _DISMODEPROC_H_ +#define _DISMODEPROC_H_ + +#include "scrnintstr.h" + +#define MAXCLOCKS 128 + +/* These are possible return values for xf86CheckMode() and ValidMode() */ +typedef enum { + MODE_OK = 0, /* Mode OK */ + MODE_HSYNC, /* hsync out of range */ + MODE_VSYNC, /* vsync out of range */ + MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ + MODE_BAD_WIDTH, /* requires an unsupported linepitch */ + MODE_NOMODE, /* no mode with a matching name */ + MODE_NO_INTERLACE, /* interlaced mode not supported */ + MODE_NO_DBLESCAN, /* doublescan mode not supported */ + MODE_NO_VSCAN, /* multiscan mode not supported */ + MODE_MEM, /* insufficient video memory */ + MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ + MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ + MODE_MEM_VIRT, /* insufficient video memory given virtual size */ + MODE_NOCLOCK, /* no fixed clock available */ + MODE_CLOCK_HIGH, /* clock required is too high */ + MODE_CLOCK_LOW, /* clock required is too low */ + MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ + MODE_BAD_HVALUE, /* horizontal timing was out of range */ + MODE_BAD_VVALUE, /* vertical timing was out of range */ + MODE_BAD_VSCAN, /* VScan value out of range */ + MODE_HSYNC_NARROW, /* horizontal sync too narrow */ + MODE_HSYNC_WIDE, /* horizontal sync too wide */ + MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ + MODE_HBLANK_WIDE, /* horizontal blanking too wide */ + MODE_VSYNC_NARROW, /* vertical sync too narrow */ + MODE_VSYNC_WIDE, /* vertical sync too wide */ + MODE_VBLANK_NARROW, /* vertical blanking too narrow */ + MODE_VBLANK_WIDE, /* vertical blanking too wide */ + MODE_PANEL, /* exceeds panel dimensions */ + MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ + MODE_ONE_WIDTH, /* only one width is supported */ + MODE_ONE_HEIGHT, /* only one height is supported */ + MODE_ONE_SIZE, /* only one resolution is supported */ + MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ + MODE_BANDWIDTH, /* mode requires too much memory bandwidth */ + MODE_BAD = -2, /* unspecified reason */ + MODE_ERROR = -1 /* error condition */ +} ModeStatus; + +/* Video mode */ +typedef struct _DisplayModeRec { + struct _DisplayModeRec *prev; + struct _DisplayModeRec *next; + const char *name; /* identifier for the mode */ + ModeStatus status; + int type; + + /* These are the values that the user sees/provides */ + int Clock; /* pixel clock freq (kHz) */ + int HDisplay; /* horizontal timing */ + int HSyncStart; + int HSyncEnd; + int HTotal; + int HSkew; + int VDisplay; /* vertical timing */ + int VSyncStart; + int VSyncEnd; + int VTotal; + int VScan; + int Flags; + + /* These are the values the hardware uses */ + int ClockIndex; + int SynthClock; /* Actual clock freq to + * be programmed (kHz) */ + int CrtcHDisplay; + int CrtcHBlankStart; + int CrtcHSyncStart; + int CrtcHSyncEnd; + int CrtcHBlankEnd; + int CrtcHTotal; + int CrtcHSkew; + int CrtcVDisplay; + int CrtcVBlankStart; + int CrtcVSyncStart; + int CrtcVSyncEnd; + int CrtcVBlankEnd; + int CrtcVTotal; + Bool CrtcHAdjusted; + Bool CrtcVAdjusted; + int PrivSize; + INT32 *Private; + int PrivFlags; + + float HSync, VRefresh; +} DisplayModeRec, *DisplayModePtr; + +#endif |