Add a bunch of IANA/IETF MIBs that are (partially) supported by OpenBSD.

These will soon be picked up by snmpd(8) for debugging output and
OID names used in snmpd.conf(5).

Go ahead sthen@ and tb@

22 files changed, 18703 insertions, 1 deletions

diff --git a/share/snmp/BRIDGE-MIB.txt b/share/snmp/BRIDGE-MIB.txt
new file mode 100644
index 00000000000..1e77a190f41
--- /dev/null
+++ b/share/snmp/BRIDGE-MIB.txt
@@ -0,0 +1,1472 @@
+BRIDGE-MIB DEFINITIONS ::= BEGIN
+
+-- ---------------------------------------------------------- --
+-- MIB for IEEE 802.1D devices
+-- ---------------------------------------------------------- --
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    Counter32, Integer32, TimeTicks, mib-2
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, MacAddress
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    InterfaceIndex FROM IF-MIB
+    ;
+
+dot1dBridge MODULE-IDENTITY
+    LAST-UPDATED "200509190000Z"
+    ORGANIZATION "IETF Bridge MIB Working Group"
+    CONTACT-INFO
+        "Email: bridge-mib@ietf.org
+
+                 K.C. Norseth (Editor)
+                 L-3 Communications
+            Tel: +1 801-594-2809
+          Email: kenyon.c.norseth@L-3com.com
+         Postal: 640 N. 2200 West.
+                 Salt Lake City, Utah 84116-0850
+
+                 Les Bell (Editor)
+                 3Com Europe Limited
+          Phone: +44 1442 438025
+          Email: elbell@ntlworld.com
+         Postal: 3Com Centre, Boundary Way
+                 Hemel Hempstead
+                 Herts.  HP2 7YU
+                 UK
+
+         Send comments to <bridge-mib@ietf.org>"
+    DESCRIPTION
+        "The Bridge MIB module for managing devices that support
+        IEEE 802.1D.
+
+        Copyright (C) The Internet Society (2005).  This version of
+        this MIB module is part of RFC 4188; see the RFC itself for
+        full legal notices."
+    REVISION     "200509190000Z"
+    DESCRIPTION
+         "Third revision, published as part of RFC 4188.
+
+         The MIB module has been converted to SMIv2 format.
+         Conformance statements have been added and some
+         description and reference clauses have been updated.
+
+         The object dot1dStpPortPathCost32 was added to
+         support IEEE 802.1t and the permissible values of
+         dot1dStpPriority and dot1dStpPortPriority have been
+         clarified for bridges supporting IEEE 802.1t or
+         IEEE 802.1w.
+
+         The interpretation of dot1dStpTimeSinceTopologyChange
+         has been clarified for bridges supporting the Rapid
+         Spanning Tree Protocol (RSTP)."
+    REVISION     "199307310000Z"
+    DESCRIPTION
+         "Second revision, published as part of RFC 1493."
+    REVISION     "199112310000Z"
+    DESCRIPTION
+         "Initial revision, published as part of RFC 1286."
+    ::= { mib-2 17 }
+
+-- ---------------------------------------------------------- --
+-- Textual Conventions
+-- ---------------------------------------------------------- --
+
+BridgeId ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The Bridge-Identifier, as used in the Spanning Tree
+        Protocol, to uniquely identify a bridge.  Its first two
+        octets (in network byte order) contain a priority value,
+        and its last 6 octets contain the MAC address used to
+        refer to a bridge in a unique fashion (typically, the
+        numerically smallest MAC address of all ports on the
+        bridge)."
+    SYNTAX      OCTET STRING (SIZE (8))
+
+Timeout ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION
+        "A Spanning Tree Protocol (STP) timer in units of 1/100
+        seconds.  Several objects in this MIB module represent
+        values of timers used by the Spanning Tree Protocol.
+        In this MIB, these timers have values in units of
+        hundredths of a second (i.e., 1/100 secs).
+
+        These timers, when stored in a Spanning Tree Protocol's
+        BPDU, are in units of 1/256 seconds.  Note, however, that
+        802.1D-1998 specifies a settable granularity of no more
+        than one second for these timers.  To avoid ambiguity,
+        a conversion algorithm is defined below for converting
+        between the different units, which ensures a timer's
+        value is not distorted by multiple conversions.
+
+        To convert a Timeout value into a value in units of
+        1/256 seconds, the following algorithm should be used:
+
+            b = floor( (n * 256) / 100)
+
+        where:
+            floor   =  quotient [ignore remainder]
+            n is the value in 1/100 second units
+            b is the value in 1/256 second units
+
+        To convert the value from 1/256 second units back to
+        1/100 seconds, the following algorithm should be used:
+
+            n = ceiling( (b * 100) / 256)
+
+        where:
+            ceiling = quotient [if remainder is 0], or
+                      quotient + 1 [if remainder is nonzero]
+            n is the value in 1/100 second units
+
+            b is the value in 1/256 second units
+
+        Note: it is important that the arithmetic operations are
+        done in the order specified (i.e., multiply first,
+        divide second)."
+    SYNTAX      Integer32
+
+-- ---------------------------------------------------------- --
+-- subtrees in the Bridge MIB
+-- ---------------------------------------------------------- --
+
+dot1dNotifications  OBJECT IDENTIFIER ::= { dot1dBridge 0 }
+
+dot1dBase           OBJECT IDENTIFIER ::= { dot1dBridge 1 }
+dot1dStp            OBJECT IDENTIFIER ::= { dot1dBridge 2 }
+
+dot1dSr             OBJECT IDENTIFIER ::= { dot1dBridge 3 }
+-- documented in RFC 1525
+
+dot1dTp             OBJECT IDENTIFIER ::= { dot1dBridge 4 }
+dot1dStatic         OBJECT IDENTIFIER ::= { dot1dBridge 5 }
+
+-- Subtrees used by Bridge MIB Extensions:
+--      pBridgeMIB  MODULE-IDENTITY   ::= { dot1dBridge 6 }
+--      qBridgeMIB  MODULE-IDENTITY   ::= { dot1dBridge 7 }
+-- Note that the practice of registering related MIB modules
+-- below dot1dBridge has been discouraged since there is no
+-- robust mechanism to track such registrations.
+
+dot1dConformance    OBJECT IDENTIFIER ::= { dot1dBridge 8 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dBase subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dBase subtree is mandatory for all
+-- bridges.
+-- ---------------------------------------------------------- --
+
+dot1dBaseBridgeAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The MAC address used by this bridge when it must be
+        referred to in a unique fashion.  It is recommended
+        that this be the numerically smallest MAC address of
+        all ports that belong to this bridge.  However, it is only
+
+        required to be unique.  When concatenated with
+        dot1dStpPriority, a unique BridgeIdentifier is formed,
+        which is used in the Spanning Tree Protocol."
+    REFERENCE
+        "IEEE 802.1D-1998: clauses 14.4.1.1.3 and 7.12.5"
+    ::= { dot1dBase 1 }
+
+dot1dBaseNumPorts OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "ports"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of ports controlled by this bridging
+        entity."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.4.1.1.3"
+    ::= { dot1dBase 2 }
+
+dot1dBaseType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(1),
+                    transparent-only(2),
+                    sourceroute-only(3),
+                    srt(4)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Indicates what type of bridging this bridge can
+        perform.  If a bridge is actually performing a
+        certain type of bridging, this will be indicated by
+        entries in the port table for the given type."
+    ::= { dot1dBase 3 }
+
+-- ---------------------------------------------------------- --
+-- The Generic Bridge Port Table
+-- ---------------------------------------------------------- --
+dot1dBasePortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dBasePortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains generic information about every
+        port that is associated with this bridge.  Transparent,
+        source-route, and srt ports are included."
+    ::= { dot1dBase 4 }
+
+dot1dBasePortEntry OBJECT-TYPE
+    SYNTAX      Dot1dBasePortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of information for each port of the bridge."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.4.2, 14.6.1"
+    INDEX  { dot1dBasePort }
+    ::= { dot1dBasePortTable 1 }
+
+Dot1dBasePortEntry ::=
+    SEQUENCE {
+        dot1dBasePort
+            Integer32,
+        dot1dBasePortIfIndex
+            InterfaceIndex,
+        dot1dBasePortCircuit
+            OBJECT IDENTIFIER,
+        dot1dBasePortDelayExceededDiscards
+            Counter32,
+        dot1dBasePortMtuExceededDiscards
+            Counter32
+    }
+
+dot1dBasePort OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port for which this entry
+        contains bridge management information."
+    ::= { dot1dBasePortEntry 1 }
+
+dot1dBasePortIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of the instance of the ifIndex object,
+        defined in IF-MIB, for the interface corresponding
+        to this port."
+    ::= { dot1dBasePortEntry 2 }
+
+dot1dBasePortCircuit OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For a port that (potentially) has the same value of
+        dot1dBasePortIfIndex as another port on the same bridge.
+        This object contains the name of an object instance
+        unique to this port.  For example, in the case where
+        multiple ports correspond one-to-one with multiple X.25
+        virtual circuits, this value might identify an (e.g.,
+        the first) object instance associated with the X.25
+        virtual circuit corresponding to this port.
+
+        For a port which has a unique value of
+        dot1dBasePortIfIndex, this object can have the value
+        { 0 0 }."
+    ::= { dot1dBasePortEntry 3 }
+
+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames discarded by this port due
+        to excessive transit delay through the bridge.  It
+        is incremented by both transparent and source
+        route bridges."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dBasePortEntry 4 }
+
+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames discarded by this port due
+        to an excessive size.  It is incremented by both
+        transparent and source route bridges."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dBasePortEntry 5 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dStp subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dStp subtree is optional.  It is
+-- implemented by those bridges that support the Spanning Tree
+-- Protocol.
+-- ---------------------------------------------------------- --
+
+dot1dStpProtocolSpecification OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    unknown(1),
+                    decLb100(2),
+                    ieee8021d(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "An indication of what version of the Spanning Tree
+        Protocol is being run.  The value 'decLb100(2)'
+        indicates the DEC LANbridge 100 Spanning Tree protocol.
+        IEEE 802.1D implementations will return 'ieee8021d(3)'.
+        If future versions of the IEEE Spanning Tree Protocol
+        that are incompatible with the current version
+        are released a new value will be defined."
+    ::= { dot1dStp 1 }
+
+dot1dStpPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of the write-able portion of the Bridge ID
+        (i.e., the first two octets of the (8 octet long) Bridge
+        ID).  The other (last) 6 octets of the Bridge ID are
+        given by the value of dot1dBaseBridgeAddress.
+        On bridges supporting IEEE 802.1t or IEEE 802.1w,
+        permissible values are 0-61440, in steps of 4096."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
+        IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
+    ::= { dot1dStp 2 }
+
+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
+    SYNTAX      TimeTicks
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The time (in hundredths of a second) since the
+        last time a topology change was detected by the
+        bridge entity.
+        For RSTP, this reports the time since the tcWhile
+        timer for any port on this Bridge was nonzero."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 14.8.1.1.,
+        IEEE 802.1w clause 14.8.1.1."
+    ::= { dot1dStp 3 }
+
+dot1dStpTopChanges OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of topology changes detected by
+        this bridge since the management entity was last
+        reset or initialized."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 14.8.1.1."
+    ::= { dot1dStp 4 }
+
+dot1dStpDesignatedRoot OBJECT-TYPE
+    SYNTAX      BridgeId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The bridge identifier of the root of the spanning
+        tree, as determined by the Spanning Tree Protocol,
+        as executed by this node.  This value is used as
+        the Root Identifier parameter in all Configuration
+        Bridge PDUs originated by this node."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.1"
+    ::= { dot1dStp 5 }
+
+dot1dStpRootCost OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The cost of the path to the root as seen from
+        this bridge."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.2"
+    ::= { dot1dStp 6 }
+
+dot1dStpRootPort OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port that offers the lowest
+        cost path from this bridge to the root bridge."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.3"
+    ::= { dot1dStp 7 }
+
+dot1dStpMaxAge OBJECT-TYPE
+    SYNTAX      Timeout
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum age of Spanning Tree Protocol information
+        learned from the network on any port before it is
+        discarded, in units of hundredths of a second.  This is
+        the actual value that this bridge is currently using."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.4"
+    ::= { dot1dStp 8 }
+
+dot1dStpHelloTime OBJECT-TYPE
+    SYNTAX      Timeout
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The amount of time between the transmission of
+        Configuration bridge PDUs by this node on any port when
+        it is the root of the spanning tree, or trying to become
+        so, in units of hundredths of a second.  This is the
+        actual value that this bridge is currently using."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.5"
+    ::= { dot1dStp 9 }
+
+dot1dStpHoldTime OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This time value determines the interval length
+        during which no more than two Configuration bridge
+        PDUs shall be transmitted by this node, in units
+        of hundredths of a second."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.14"
+    ::= { dot1dStp 10 }
+
+dot1dStpForwardDelay OBJECT-TYPE
+    SYNTAX      Timeout
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This time value, measured in units of hundredths of a
+        second, controls how fast a port changes its spanning
+        state when moving towards the Forwarding state.  The
+        value determines how long the port stays in each of the
+        Listening and Learning states, which precede the
+        Forwarding state.  This value is also used when a
+        topology change has been detected and is underway, to
+        age all dynamic entries in the Forwarding Database.
+        [Note that this value is the one that this bridge is
+        currently using, in contrast to
+        dot1dStpBridgeForwardDelay, which is the value that this
+        bridge and all others would start using if/when this
+        bridge were to become the root.]"
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.6"
+    ::= { dot1dStp 11 }
+
+dot1dStpBridgeMaxAge OBJECT-TYPE
+    SYNTAX      Timeout (600..4000)
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value that all bridges use for MaxAge when this
+        bridge is acting as the root.  Note that 802.1D-1998
+        specifies that the range for this parameter is related
+        to the value of dot1dStpBridgeHelloTime.  The
+        granularity of this timer is specified by 802.1D-1998 to
+        be 1 second.  An agent may return a badValue error if a
+        set is attempted to a value that is not a whole number
+        of seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.8"
+    ::= { dot1dStp 12 }
+
+dot1dStpBridgeHelloTime OBJECT-TYPE
+    SYNTAX      Timeout (100..1000)
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value that all bridges use for HelloTime when this
+        bridge is acting as the root.  The granularity of this
+        timer is specified by 802.1D-1998 to be 1 second.  An
+        agent may return a badValue error if a set is attempted
+
+        to a value that is not a whole number of seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.9"
+    ::= { dot1dStp 13 }
+
+dot1dStpBridgeForwardDelay OBJECT-TYPE
+    SYNTAX      Timeout (400..3000)
+    UNITS       "centi-seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value that all bridges use for ForwardDelay when
+        this bridge is acting as the root.  Note that
+        802.1D-1998 specifies that the range for this parameter
+        is related to the value of dot1dStpBridgeMaxAge.  The
+        granularity of this timer is specified by 802.1D-1998 to
+        be 1 second.  An agent may return a badValue error if a
+        set is attempted to a value that is not a whole number
+        of seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.3.10"
+    ::= { dot1dStp 14 }
+
+-- ---------------------------------------------------------- --
+-- The Spanning Tree Port Table
+-- ---------------------------------------------------------- --
+
+dot1dStpPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dStpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains port-specific information
+        for the Spanning Tree Protocol."
+    ::= { dot1dStp 15 }
+
+dot1dStpPortEntry OBJECT-TYPE
+    SYNTAX      Dot1dStpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of information maintained by every port about
+        the Spanning Tree Protocol state for that port."
+    INDEX   { dot1dStpPort }
+    ::= { dot1dStpPortTable 1 }
+
+Dot1dStpPortEntry ::=
+    SEQUENCE {
+
+        dot1dStpPort
+            Integer32,
+        dot1dStpPortPriority
+            Integer32,
+        dot1dStpPortState
+            INTEGER,
+        dot1dStpPortEnable
+            INTEGER,
+        dot1dStpPortPathCost
+            Integer32,
+        dot1dStpPortDesignatedRoot
+            BridgeId,
+        dot1dStpPortDesignatedCost
+            Integer32,
+        dot1dStpPortDesignatedBridge
+            BridgeId,
+        dot1dStpPortDesignatedPort
+            OCTET STRING,
+        dot1dStpPortForwardTransitions
+            Counter32,
+        dot1dStpPortPathCost32
+            Integer32
+    }
+
+dot1dStpPort OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port for which this entry
+        contains Spanning Tree Protocol management information."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.8.2.1.2"
+    ::= { dot1dStpPortEntry 1 }
+
+dot1dStpPortPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The value of the priority field that is contained in
+        the first (in network byte order) octet of the (2 octet
+        long) Port ID.  The other octet of the Port ID is given
+        by the value of dot1dStpPort.
+        On bridges supporting IEEE 802.1t or IEEE 802.1w,
+        permissible values are 0-240, in steps of 16."
+    REFERENCE
+        "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
+        IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
+    ::= { dot1dStpPortEntry 2 }
+
+dot1dStpPortState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    disabled(1),
+                    blocking(2),
+                    listening(3),
+                    learning(4),
+                    forwarding(5),
+                    broken(6)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port's current state, as defined by application of
+        the Spanning Tree Protocol.  This state controls what
+        action a port takes on reception of a frame.  If the
+        bridge has detected a port that is malfunctioning, it
+        will place that port into the broken(6) state.  For
+        ports that are disabled (see dot1dStpPortEnable), this
+        object will have a value of disabled(1)."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.2"
+    ::= { dot1dStpPortEntry 3 }
+
+dot1dStpPortEnable OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    enabled(1),
+                    disabled(2)
+                }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The enabled/disabled status of the port."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.2"
+    ::= { dot1dStpPortEntry 4 }
+
+dot1dStpPortPathCost OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The contribution of this port to the path cost of
+        paths towards the spanning tree root which include
+        this port.  802.1D-1998 recommends that the default
+        value of this parameter be in inverse proportion to
+
+        the speed of the attached LAN.
+
+        New implementations should support dot1dStpPortPathCost32.
+        If the port path costs exceeds the maximum value of this
+        object then this object should report the maximum value,
+        namely 65535.  Applications should try to read the
+        dot1dStpPortPathCost32 object if this object reports
+        the maximum value."
+    REFERENCE "IEEE 802.1D-1998: clause 8.5.5.3"
+        ::= { dot1dStpPortEntry 5 }
+
+dot1dStpPortDesignatedRoot OBJECT-TYPE
+    SYNTAX      BridgeId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The unique Bridge Identifier of the Bridge
+        recorded as the Root in the Configuration BPDUs
+        transmitted by the Designated Bridge for the
+        segment to which the port is attached."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.4"
+    ::= { dot1dStpPortEntry 6 }
+
+dot1dStpPortDesignatedCost OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The path cost of the Designated Port of the segment
+        connected to this port.  This value is compared to the
+        Root Path Cost field in received bridge PDUs."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.5"
+    ::= { dot1dStpPortEntry 7 }
+
+dot1dStpPortDesignatedBridge OBJECT-TYPE
+    SYNTAX      BridgeId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Bridge Identifier of the bridge that this
+        port considers to be the Designated Bridge for
+        this port's segment."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.6"
+    ::= { dot1dStpPortEntry 8 }
+
+dot1dStpPortDesignatedPort OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (2))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Port Identifier of the port on the Designated
+        Bridge for this port's segment."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 8.5.5.7"
+    ::= { dot1dStpPortEntry 9 }
+
+dot1dStpPortForwardTransitions OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of times this port has transitioned
+        from the Learning state to the Forwarding state."
+    ::= { dot1dStpPortEntry 10 }
+
+dot1dStpPortPathCost32 OBJECT-TYPE
+    SYNTAX      Integer32 (1..200000000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The contribution of this port to the path cost of
+        paths towards the spanning tree root which include
+        this port.  802.1D-1998 recommends that the default
+        value of this parameter be in inverse proportion to
+        the speed of the attached LAN.
+
+        This object replaces dot1dStpPortPathCost to support
+        IEEE 802.1t."
+    REFERENCE
+        "IEEE 802.1t clause 8.10.2, Table 8-5."
+    ::= { dot1dStpPortEntry 11 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dTp subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dTp subtree is optional.  It is
+-- implemented by those bridges that support the transparent
+-- bridging mode.  A transparent or SRT bridge will implement
+-- this subtree.
+-- ---------------------------------------------------------- --
+
+dot1dTpLearnedEntryDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The total number of Forwarding Database entries that
+        have been or would have been learned, but have been
+        discarded due to a lack of storage space in the
+        Forwarding Database.  If this counter is increasing, it
+        indicates that the Forwarding Database is regularly
+        becoming full (a condition that has unpleasant
+        performance effects on the subnetwork).  If this counter
+        has a significant value but is not presently increasing,
+        it indicates that the problem has been occurring but is
+        not persistent."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.1.1.3"
+    ::= { dot1dTp 1 }
+
+dot1dTpAgingTime OBJECT-TYPE
+    SYNTAX      Integer32 (10..1000000)
+    UNITS       "seconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "The timeout period in seconds for aging out
+        dynamically-learned forwarding information.
+        802.1D-1998 recommends a default of 300 seconds."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.1.1.3"
+    ::= { dot1dTp 2 }
+
+-- ---------------------------------------------------------- --
+--  The Forwarding Database for Transparent Bridges
+-- ---------------------------------------------------------- --
+
+dot1dTpFdbTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dTpFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains information about unicast
+        entries for which the bridge has forwarding and/or
+        filtering information.  This information is used
+        by the transparent bridging function in
+        determining how to propagate a received frame."
+    ::= { dot1dTp 3 }
+
+dot1dTpFdbEntry OBJECT-TYPE
+    SYNTAX      Dot1dTpFdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a specific unicast MAC address
+        for which the bridge has some forwarding and/or
+        filtering information."
+    INDEX   { dot1dTpFdbAddress }
+    ::= { dot1dTpFdbTable 1 }
+
+Dot1dTpFdbEntry ::=
+    SEQUENCE {
+        dot1dTpFdbAddress
+            MacAddress,
+        dot1dTpFdbPort
+            Integer32,
+        dot1dTpFdbStatus
+            INTEGER
+    }
+
+dot1dTpFdbAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A unicast MAC address for which the bridge has
+        forwarding and/or filtering information."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
+    ::= { dot1dTpFdbEntry 1 }
+
+dot1dTpFdbPort OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Either the value '0', or the port number of the port on
+        which a frame having a source address equal to the value
+        of the corresponding instance of dot1dTpFdbAddress has
+        been seen.  A value of '0' indicates that the port
+        number has not been learned, but that the bridge does
+        have some forwarding/filtering information about this
+        address (e.g., in the dot1dStaticTable).  Implementors
+        are encouraged to assign the port value to this object
+        whenever it is learned, even for addresses for which the
+        corresponding value of dot1dTpFdbStatus is not
+        learned(3)."
+    ::= { dot1dTpFdbEntry 2 }
+
+dot1dTpFdbStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    invalid(2),
+                    learned(3),
+                    self(4),
+                    mgmt(5)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The status of this entry.  The meanings of the
+        values are:
+            other(1) - none of the following.  This would
+                include the case where some other MIB object
+                (not the corresponding instance of
+                dot1dTpFdbPort, nor an entry in the
+                dot1dStaticTable) is being used to determine if
+                and how frames addressed to the value of the
+                corresponding instance of dot1dTpFdbAddress are
+                being forwarded.
+            invalid(2) - this entry is no longer valid (e.g.,
+                it was learned but has since aged out), but has
+                not yet been flushed from the table.
+            learned(3) - the value of the corresponding instance
+                of dot1dTpFdbPort was learned, and is being
+                used.
+            self(4) - the value of the corresponding instance of
+                dot1dTpFdbAddress represents one of the bridge's
+                addresses.  The corresponding instance of
+                dot1dTpFdbPort indicates which of the bridge's
+                ports has this address.
+            mgmt(5) - the value of the corresponding instance of
+                dot1dTpFdbAddress is also the value of an
+                existing instance of dot1dStaticAddress."
+    ::= { dot1dTpFdbEntry 3 }
+
+-- ---------------------------------------------------------- --
+--  Port Table for Transparent Bridges
+-- ---------------------------------------------------------- --
+
+dot1dTpPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dTpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table that contains information about every port that
+        is associated with this transparent bridge."
+    ::= { dot1dTp 4 }
+
+dot1dTpPortEntry OBJECT-TYPE
+    SYNTAX      Dot1dTpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A list of information for each port of a transparent
+        bridge."
+    INDEX   { dot1dTpPort }
+    ::= { dot1dTpPortTable 1 }
+
+Dot1dTpPortEntry ::=
+    SEQUENCE {
+        dot1dTpPort
+            Integer32,
+        dot1dTpPortMaxInfo
+            Integer32,
+        dot1dTpPortInFrames
+            Counter32,
+        dot1dTpPortOutFrames
+            Counter32,
+        dot1dTpPortInDiscards
+            Counter32
+    }
+
+dot1dTpPort OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The port number of the port for which this entry
+        contains Transparent bridging management information."
+    ::= { dot1dTpPortEntry 1 }
+
+-- It would be nice if we could use ifMtu as the size of the
+-- largest INFO field, but we can't because ifMtu is defined
+-- to be the size that the (inter-)network layer can use, which
+-- can differ from the MAC layer (especially if several layers
+-- of encapsulation are used).
+
+dot1dTpPortMaxInfo OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The maximum size of the INFO (non-MAC) field that
+
+        this port will receive or transmit."
+    ::= { dot1dTpPortEntry 2 }
+
+dot1dTpPortInFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "frames"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames that have been received by this
+        port from its segment.  Note that a frame received on the
+        interface corresponding to this port is only counted by
+        this object if and only if it is for a protocol being
+        processed by the local bridging function, including
+        bridge management frames."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dTpPortEntry 3 }
+
+dot1dTpPortOutFrames OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "frames"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frames that have been transmitted by this
+        port to its segment.  Note that a frame transmitted on
+        the interface corresponding to this port is only counted
+        by this object if and only if it is for a protocol being
+        processed by the local bridging function, including
+        bridge management frames."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dTpPortEntry 4 }
+
+dot1dTpPortInDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    UNITS       "frames"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Count of received valid frames that were discarded
+        (i.e., filtered) by the Forwarding Process."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.6.1.1.3"
+    ::= { dot1dTpPortEntry 5 }
+
+-- ---------------------------------------------------------- --
+
+-- The Static (Destination-Address Filtering) Database
+-- ---------------------------------------------------------- --
+-- Implementation of this subtree is optional.
+-- ---------------------------------------------------------- --
+
+dot1dStaticTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF Dot1dStaticEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table containing filtering information configured
+        into the bridge by (local or network) management
+        specifying the set of ports to which frames received
+        from specific ports and containing specific destination
+        addresses are allowed to be forwarded.  The value of
+        zero in this table, as the port number from which frames
+        with a specific destination address are received, is
+        used to specify all ports for which there is no specific
+        entry in this table for that particular destination
+        address.  Entries are valid for unicast and for
+        group/broadcast addresses."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.2"
+    ::= { dot1dStatic 1 }
+
+dot1dStaticEntry OBJECT-TYPE
+    SYNTAX      Dot1dStaticEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Filtering information configured into the bridge by
+        (local or network) management specifying the set of
+        ports to which frames received from a specific port and
+        containing a specific destination address are allowed to
+        be forwarded."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 14.7.2"
+    INDEX   { dot1dStaticAddress, dot1dStaticReceivePort }
+    ::= { dot1dStaticTable 1 }
+
+Dot1dStaticEntry ::=
+    SEQUENCE {
+        dot1dStaticAddress       MacAddress,
+        dot1dStaticReceivePort   Integer32,
+        dot1dStaticAllowedToGoTo OCTET STRING,
+        dot1dStaticStatus        INTEGER
+    }
+
+dot1dStaticAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The destination MAC address in a frame to which this
+        entry's filtering information applies.  This object can
+        take the value of a unicast address, a group address, or
+        the broadcast address."
+    REFERENCE
+        "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
+    ::= { dot1dStaticEntry 1 }
+
+dot1dStaticReceivePort OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Either the value '0', or the port number of the port
+        from which a frame must be received in order for this
+        entry's filtering information to apply.  A value of zero
+        indicates that this entry applies on all ports of the
+        bridge for which there is no other applicable entry."
+    ::= { dot1dStaticEntry 2 }
+
+dot1dStaticAllowedToGoTo OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE (0..512))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The set of ports to which frames received from a
+        specific port and destined for a specific MAC address,
+        are allowed to be forwarded.  Each octet within the
+        value of this object specifies a set of eight ports,
+        with the first octet specifying ports 1 through 8, the
+        second octet specifying ports 9 through 16, etc.  Within
+        each octet, the most significant bit represents the
+        lowest numbered port, and the least significant bit
+        represents the highest numbered port.  Thus, each port
+        of the bridge is represented by a single bit within the
+        value of this object.  If that bit has a value of '1',
+        then that port is included in the set of ports; the port
+        is not included if its bit has a value of '0'.  (Note
+        that the setting of the bit corresponding to the port
+        from which a frame is received is irrelevant.)  The
+        default value of this object is a string of ones of
+        appropriate length.
+
+        The value of this object may exceed the required minimum
+        maximum message size of some SNMP transport (484 bytes,
+        in the case of SNMP over UDP, see RFC 3417, section 3.2).
+        SNMP engines on bridges supporting a large number of
+        ports must support appropriate maximum message sizes."
+    ::= { dot1dStaticEntry 3 }
+
+dot1dStaticStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    other(1),
+                    invalid(2),
+                    permanent(3),
+                    deleteOnReset(4),
+                    deleteOnTimeout(5)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the status of this entry.
+        The default value is permanent(3).
+            other(1) - this entry is currently in use but the
+                conditions under which it will remain so are
+                different from each of the following values.
+            invalid(2) - writing this value to the object
+                removes the corresponding entry.
+            permanent(3) - this entry is currently in use and
+                will remain so after the next reset of the
+                bridge.
+            deleteOnReset(4) - this entry is currently in use
+                and will remain so until the next reset of the
+                bridge.
+            deleteOnTimeout(5) - this entry is currently in use
+                and will remain so until it is aged out."
+    ::= { dot1dStaticEntry 4 }
+
+-- ---------------------------------------------------------- --
+-- Notifications for use by Bridges
+-- ---------------------------------------------------------- --
+-- Notifications for the Spanning Tree Protocol
+-- ---------------------------------------------------------- --
+
+newRoot NOTIFICATION-TYPE
+    -- OBJECTS     { }
+    STATUS      current
+    DESCRIPTION
+        "The newRoot trap indicates that the sending agent has
+        become the new root of the Spanning Tree; the trap is
+        sent by a bridge soon after its election as the new
+
+        root, e.g., upon expiration of the Topology Change Timer,
+        immediately subsequent to its election.  Implementation
+        of this trap is optional."
+    ::= { dot1dNotifications 1 }
+
+topologyChange NOTIFICATION-TYPE
+    -- OBJECTS     { }
+    STATUS      current
+    DESCRIPTION
+        "A topologyChange trap is sent by a bridge when any of
+        its configured ports transitions from the Learning state
+        to the Forwarding state, or from the Forwarding state to
+        the Blocking state.  The trap is not sent if a newRoot
+        trap is sent for the same transition.  Implementation of
+        this trap is optional."
+    ::= { dot1dNotifications 2 }
+
+-- ---------------------------------------------------------- --
+-- IEEE 802.1D MIB - Conformance Information
+-- ---------------------------------------------------------- --
+
+dot1dGroups         OBJECT IDENTIFIER ::= { dot1dConformance 1 }
+dot1dCompliances    OBJECT IDENTIFIER ::= { dot1dConformance 2 }
+
+-- ---------------------------------------------------------- --
+-- units of conformance
+-- ---------------------------------------------------------- --
+
+-- ---------------------------------------------------------- --
+-- the dot1dBase group
+-- ---------------------------------------------------------- --
+
+dot1dBaseBridgeGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dBaseBridgeAddress,
+        dot1dBaseNumPorts,
+        dot1dBaseType
+    }
+    STATUS      current
+    DESCRIPTION
+        "Bridge level information for this device."
+    ::= { dot1dGroups 1 }
+
+dot1dBasePortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dBasePort,
+        dot1dBasePortIfIndex,
+        dot1dBasePortCircuit,
+        dot1dBasePortDelayExceededDiscards,
+        dot1dBasePortMtuExceededDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "Information for each port on this device."
+    ::= { dot1dGroups 2 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dStp group
+-- ---------------------------------------------------------- --
+
+dot1dStpBridgeGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStpProtocolSpecification,
+        dot1dStpPriority,
+        dot1dStpTimeSinceTopologyChange,
+        dot1dStpTopChanges,
+        dot1dStpDesignatedRoot,
+        dot1dStpRootCost,
+        dot1dStpRootPort,
+        dot1dStpMaxAge,
+        dot1dStpHelloTime,
+        dot1dStpHoldTime,
+        dot1dStpForwardDelay,
+        dot1dStpBridgeMaxAge,
+        dot1dStpBridgeHelloTime,
+        dot1dStpBridgeForwardDelay
+    }
+    STATUS      current
+    DESCRIPTION
+        "Bridge level Spanning Tree data for this device."
+    ::= { dot1dGroups 3 }
+
+dot1dStpPortGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStpPort,
+        dot1dStpPortPriority,
+        dot1dStpPortState,
+        dot1dStpPortEnable,
+        dot1dStpPortPathCost,
+        dot1dStpPortDesignatedRoot,
+        dot1dStpPortDesignatedCost,
+        dot1dStpPortDesignatedBridge,
+        dot1dStpPortDesignatedPort,
+        dot1dStpPortForwardTransitions
+    }
+    STATUS      current
+    DESCRIPTION
+        "Spanning Tree data for each port on this device."
+    ::= { dot1dGroups 4 }
+
+dot1dStpPortGroup2 OBJECT-GROUP
+    OBJECTS {
+        dot1dStpPort,
+        dot1dStpPortPriority,
+        dot1dStpPortState,
+        dot1dStpPortEnable,
+        dot1dStpPortDesignatedRoot,
+        dot1dStpPortDesignatedCost,
+        dot1dStpPortDesignatedBridge,
+        dot1dStpPortDesignatedPort,
+        dot1dStpPortForwardTransitions,
+        dot1dStpPortPathCost32
+    }
+    STATUS      current
+    DESCRIPTION
+        "Spanning Tree data for each port on this device."
+    ::= { dot1dGroups 5 }
+
+dot1dStpPortGroup3 OBJECT-GROUP
+    OBJECTS {
+        dot1dStpPortPathCost32
+    }
+    STATUS      current
+    DESCRIPTION
+        "Spanning Tree data for devices supporting 32-bit
+         path costs."
+    ::= { dot1dGroups 6 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dTp group
+-- ---------------------------------------------------------- --
+
+dot1dTpBridgeGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dTpLearnedEntryDiscards,
+        dot1dTpAgingTime
+    }
+    STATUS      current
+    DESCRIPTION
+        "Bridge level Transparent Bridging data."
+    ::= { dot1dGroups 7 }
+
+dot1dTpFdbGroup OBJECT-GROUP
+    OBJECTS {
+
+        dot1dTpFdbAddress,
+        dot1dTpFdbPort,
+        dot1dTpFdbStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "Filtering Database information for the Bridge."
+    ::= { dot1dGroups 8 }
+
+dot1dTpGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dTpPort,
+        dot1dTpPortMaxInfo,
+        dot1dTpPortInFrames,
+        dot1dTpPortOutFrames,
+        dot1dTpPortInDiscards
+    }
+    STATUS      current
+    DESCRIPTION
+        "Dynamic Filtering Database information for each port of
+        the Bridge."
+    ::= { dot1dGroups 9 }
+
+-- ---------------------------------------------------------- --
+-- The Static (Destination-Address Filtering) Database
+-- ---------------------------------------------------------- --
+
+dot1dStaticGroup OBJECT-GROUP
+    OBJECTS {
+        dot1dStaticAddress,
+        dot1dStaticReceivePort,
+        dot1dStaticAllowedToGoTo,
+        dot1dStaticStatus
+    }
+    STATUS      current
+    DESCRIPTION
+        "Static Filtering Database information for each port of
+        the Bridge."
+    ::= { dot1dGroups 10 }
+
+-- ---------------------------------------------------------- --
+-- The Trap Notification Group
+-- ---------------------------------------------------------- --
+
+dot1dNotificationGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        newRoot,
+        topologyChange
+    }
+    STATUS      current
+    DESCRIPTION
+        "Group of objects describing notifications (traps)."
+    ::= { dot1dGroups 11 }
+
+-- ---------------------------------------------------------- --
+-- compliance statements
+-- ---------------------------------------------------------- --
+
+bridgeCompliance1493 MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for device support of bridging
+        services, as per RFC1493."
+
+    MODULE
+        MANDATORY-GROUPS {
+            dot1dBaseBridgeGroup,
+            dot1dBasePortGroup
+        }
+
+    GROUP   dot1dStpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the Spanning Tree Protocol."
+
+    GROUP   dot1dStpPortGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the Spanning Tree Protocol."
+
+    GROUP   dot1dTpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the transparent bridging mode.  A
+        transparent or SRT bridge will implement this group."
+
+    GROUP   dot1dTpFdbGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+        that support the transparent bridging mode.  A
+        transparent or SRT bridge will implement this group."
+
+    GROUP   dot1dTpGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+
+        that support the transparent bridging mode.  A
+        transparent or SRT bridge will implement this group."
+
+    GROUP   dot1dStaticGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP dot1dNotificationGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { dot1dCompliances 1 }
+
+bridgeCompliance4188 MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+        "The compliance statement for device support of bridging
+        services.  This supports 32-bit Path Cost values and the
+        more restricted bridge and port priorities, as per IEEE
+        802.1t.
+
+        Full support for the 802.1D management objects requires that
+        the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as
+        well as the IF-MIB [RFC2863] objects ifIndex, ifType,
+        ifDescr, ifPhysAddress, and ifLastChange are implemented."
+
+    MODULE
+        MANDATORY-GROUPS {
+            dot1dBaseBridgeGroup,
+            dot1dBasePortGroup
+        }
+
+    GROUP   dot1dStpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the Spanning Tree Protocol."
+
+    OBJECT dot1dStpPriority
+    SYNTAX Integer32 (0|4096|8192|12288|16384|20480|24576
+                     |28672|32768|36864|40960|45056|49152
+                     |53248|57344|61440)
+    DESCRIPTION
+        "The possible values defined by IEEE 802.1t."
+
+    GROUP   dot1dStpPortGroup2
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the Spanning Tree Protocol."
+
+    GROUP   dot1dStpPortGroup3
+    DESCRIPTION
+        "Implementation of this group is mandatory for bridges
+         that support the Spanning Tree Protocol and 32-bit path
+         costs.  In particular, this includes devices supporting
+         IEEE 802.1t and IEEE 802.1w."
+
+    OBJECT dot1dStpPortPriority
+    SYNTAX Integer32 (0|16|32|48|64|80|96|112|128
+                     |144|160|176|192|208|224|240)
+    DESCRIPTION
+        "The possible values defined by IEEE 802.1t."
+
+    GROUP   dot1dTpBridgeGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the transparent bridging
+        mode.  A transparent or SRT bridge will implement
+        this group."
+
+    GROUP   dot1dTpFdbGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the transparent bridging
+        mode.  A transparent or SRT bridge will implement
+        this group."
+
+    GROUP   dot1dTpGroup
+    DESCRIPTION
+        "Implementation of this group is mandatory for
+        bridges that support the transparent bridging
+        mode.  A transparent or SRT bridge will implement
+        this group."
+
+    GROUP   dot1dStaticGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+
+    GROUP dot1dNotificationGroup
+    DESCRIPTION
+        "Implementation of this group is optional."
+    ::= { dot1dCompliances 2 }
+
+END
diff --git a/share/snmp/HOST-RESOURCES-MIB.txt b/share/snmp/HOST-RESOURCES-MIB.txt
new file mode 100644
index 00000000000..373b9b328b3
--- /dev/null
+++ b/share/snmp/HOST-RESOURCES-MIB.txt
@@ -0,0 +1,1540 @@
+HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY, OBJECT-TYPE, mib-2,
+Integer32, Counter32, Gauge32, TimeTicks  FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION, DisplayString,
+TruthValue, DateAndTime, AutonomousType   FROM SNMPv2-TC
+
+MODULE-COMPLIANCE, OBJECT-GROUP           FROM SNMPv2-CONF
+
+InterfaceIndexOrZero                      FROM IF-MIB;
+
+hostResourcesMibModule MODULE-IDENTITY
+   LAST-UPDATED "200003060000Z"    -- 6 March 2000
+   ORGANIZATION "IETF Host Resources MIB Working Group"
+   CONTACT-INFO
+       "Steve Waldbusser
+       Postal: Lucent Technologies, Inc.
+               1213 Innsbruck Dr.
+               Sunnyvale, CA 94089
+               USA
+       Phone:  650-318-1251
+       Fax:    650-318-1633
+       Email:  waldbusser@lucent.com
+
+       In addition, the Host Resources MIB mailing list is
+       dedicated to discussion of this MIB. To join the
+       mailing list, send a request message to
+       hostmib-request@andrew.cmu.edu. The mailing list
+       address is hostmib@andrew.cmu.edu."
+   DESCRIPTION
+       "This MIB is for use in managing host systems. The term
+       `host' is construed to mean any computer that communicates
+       with other similar computers attached to the internet and
+       that is directly used by one or more human beings. Although
+       this MIB does not necessarily apply to devices whose primary
+       function is communications services (e.g., terminal servers,
+       routers, bridges, monitoring equipment), such relevance is
+       not explicitly precluded.  This MIB instruments attributes
+       common to all internet hosts including, for example, both
+       personal computers and systems that run variants of Unix."
+
+   REVISION "200003060000Z"        -- 6 March 2000
+   DESCRIPTION
+       "Clarifications and bug fixes based on implementation
+       experience.  This revision was also reformatted in the SMIv2
+       format. The revisions made were:
+
+       New RFC document standards:
+          Added Copyright notice, updated introduction to SNMP
+          Framework, updated references section, added reference to
+          RFC 2119, and added a meaningful Security Considerations
+          section.
+
+       New IANA considerations section for registration of new types
+
+       Conversion to new SMIv2 syntax for the following types and
+       macros:
+           Counter32, Integer32, Gauge32, MODULE-IDENTITY,
+           OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY,
+           MODULE-COMPLIANCE, OBJECT-GROUP
+
+       Used new Textual Conventions:
+           TruthValue, DateAndTime, AutonomousType,
+           InterfaceIndexOrZero
+
+       Fixed typo in hrPrinterStatus.
+
+       Added missing error bits to hrPrinterDetectedErrorState and
+       clarified confusion resulting from suggested mappings to
+       hrPrinterStatus.
+
+       Clarified that size of objects of type
+       InternationalDisplayString is number of octets, not number
+       of encoded symbols.
+
+       Clarified the use of the following objects based on
+       implementation experience:
+           hrSystemInitialLoadDevice, hrSystemInitialLoadParameters,
+           hrMemorySize, hrStorageSize, hrStorageAllocationFailures,
+           hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex,
+           hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU,
+           and hrSWInstalledDate.
+
+       Clarified implementation technique for hrSWInstalledTable.
+
+       Used new AUGMENTS clause for hrSWRunPerfTable.
+
+       Added Internationalization Considerations section.
+
+This revision published as RFC2790."
+
+   REVISION "9910202200Z"    -- 20 October, 1999
+   DESCRIPTION
+       "The original version of this MIB, published as
+       RFC1514."
+   ::= { hrMIBAdminInfo 1 }
+
+host     OBJECT IDENTIFIER ::= { mib-2 25 }
+
+hrSystem        OBJECT IDENTIFIER ::= { host 1 }
+hrStorage       OBJECT IDENTIFIER ::= { host 2 }
+hrDevice        OBJECT IDENTIFIER ::= { host 3 }
+hrSWRun         OBJECT IDENTIFIER ::= { host 4 }
+hrSWRunPerf     OBJECT IDENTIFIER ::= { host 5 }
+hrSWInstalled   OBJECT IDENTIFIER ::= { host 6 }
+hrMIBAdminInfo  OBJECT IDENTIFIER ::= { host 7 }
+
+-- textual conventions
+
+KBytes ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "Storage size, expressed in units of 1024 bytes."
+    SYNTAX Integer32 (0..2147483647)
+
+ProductID ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This textual convention is intended to identify the
+
+        manufacturer, model, and version of a specific
+        hardware or software product.  It is suggested that
+        these OBJECT IDENTIFIERs are allocated such that all
+        products from a particular manufacturer are registered
+        under a subtree distinct to that manufacturer.  In
+        addition, all versions of a product should be
+        registered under a subtree distinct to that product.
+        With this strategy, a management station may uniquely
+        determine the manufacturer and/or model of a product
+        whose productID is unknown to the management station.
+        Objects of this type may be useful for inventory
+        purposes or for automatically detecting
+        incompatibilities or version mismatches between
+        various hardware and software components on a system.
+
+        For example, the product ID for the ACME 4860 66MHz
+        clock doubled processor might be:
+        enterprises.acme.acmeProcessors.a4860DX2.MHz66
+
+        A software product might be registered as:
+        enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1)
+        "
+    SYNTAX OBJECT IDENTIFIER
+
+-- unknownProduct will be used for any unknown ProductID
+-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 }
+
+InternationalDisplayString ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This data type is used to model textual information
+        in some character set.  A network management station
+        should use a local algorithm to determine which
+        character set is in use and how it should be
+        displayed.  Note that this character set may be
+        encoded with more than one octet per symbol, but will
+        most often be NVT ASCII. When a size clause is
+        specified for an object of this type, the size refers
+        to the length in octets, not the number of symbols."
+    SYNTAX OCTET STRING
+
+-- The Host Resources System Group
+
+hrSystemUptime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of time since this host was last
+        initialized.  Note that this is different from
+        sysUpTime in the SNMPv2-MIB [RFC1907] because
+        sysUpTime is the uptime of the network management
+        portion of the system."
+    ::= { hrSystem 1 }
+
+hrSystemDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The host's notion of the local date and time of day."
+    ::= { hrSystem 2 }
+
+hrSystemInitialLoadDevice OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The index of the hrDeviceEntry for the device from
+        which this host is configured to load its initial
+        operating system configuration (i.e., which operating
+        system code and/or boot parameters).
+
+        Note that writing to this object just changes the
+        configuration that will be used the next time the
+        operating system is loaded and does not actually cause
+        the reload to occur."
+    ::= { hrSystem 3 }
+
+hrSystemInitialLoadParameters OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..128))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object contains the parameters (e.g. a pathname
+        and parameter) supplied to the load device when
+        requesting the initial operating system configuration
+        from that device.
+
+     Note that writing to this object just changes the
+     configuration that will be used the next time the
+     operating system is loaded and does not actually cause
+     the reload to occur."
+    ::= { hrSystem 4 }
+
+hrSystemNumUsers OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of user sessions for which this host is
+        storing state information.  A session is a collection
+        of processes requiring a single act of user
+        authentication and possibly subject to collective job
+        control."
+    ::= { hrSystem 5 }
+
+hrSystemProcesses OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of process contexts currently loaded or
+        running on this system."
+    ::= { hrSystem 6 }
+
+hrSystemMaxProcesses OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of process contexts this system
+        can support.  If there is no fixed maximum, the value
+        should be zero.  On systems that have a fixed maximum,
+        this object can help diagnose failures that occur when
+        this maximum is reached."
+    ::= { hrSystem 7 }
+
+-- The Host Resources Storage Group
+
+-- Registration point for storage types, for use with hrStorageType.
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrStorageTypes          OBJECT IDENTIFIER ::= { hrStorage 1 }
+
+hrMemorySize OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of physical read-write main memory,
+        typically RAM, contained by the host."
+    ::= { hrStorage 2 }
+
+hrStorageTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of logical storage areas on
+        the host.
+
+        An entry shall be placed in the storage table for each
+        logical area of storage that is allocated and has
+        fixed resource limits.  The amount of storage
+        represented in an entity is the amount actually usable
+        by the requesting entity, and excludes loss due to
+        formatting or file system reference information.
+
+        These entries are associated with logical storage
+        areas, as might be seen by an application, rather than
+        physical storage entities which are typically seen by
+        an operating system.  Storage such as tapes and
+        floppies without file systems on them are typically
+        not allocated in chunks by the operating system to
+        requesting applications, and therefore shouldn't
+        appear in this table.  Examples of valid storage for
+        this table include disk partitions, file systems, ram
+        (for some architectures this is further segmented into
+        regular memory, extended memory, and so on), backing
+        store for virtual memory (`swap space').
+
+        This table is intended to be a useful diagnostic for
+        `out of memory' and `out of buffers' types of
+        failures.  In addition, it can be a useful performance
+        monitoring tool for tracking memory, disk, or buffer
+        usage."
+    ::= { hrStorage 3 }
+
+hrStorageEntry OBJECT-TYPE
+    SYNTAX     HrStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one logical storage area on
+        the host.  As an example, an instance of the
+        hrStorageType object might be named hrStorageType.3"
+    INDEX { hrStorageIndex }
+    ::= { hrStorageTable 1 }
+
+HrStorageEntry ::= SEQUENCE {
+        hrStorageIndex               Integer32,
+        hrStorageType                AutonomousType,
+        hrStorageDescr               DisplayString,
+        hrStorageAllocationUnits     Integer32,
+        hrStorageSize                Integer32,
+        hrStorageUsed                Integer32,
+        hrStorageAllocationFailures  Counter32
+    }
+
+hrStorageIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each logical storage area
+        contained by the host."
+    ::= { hrStorageEntry 1 }
+
+hrStorageType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of storage represented by this entry."
+    ::= { hrStorageEntry 2 }
+
+hrStorageDescr OBJECT-TYPE
+    SYNTAX     DisplayString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the type and instance of the storage
+        described by this entry."
+    ::= { hrStorageEntry 3 }
+
+hrStorageAllocationUnits OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    UNITS      "Bytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The size, in bytes, of the data objects allocated
+        from this pool.  If this entry is monitoring sectors,
+        blocks, buffers, or packets, for example, this number
+        will commonly be greater than one.  Otherwise this
+        number will typically be one."
+    ::= { hrStorageEntry 4 }
+
+hrStorageSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The size of the storage represented by this entry, in
+        units of hrStorageAllocationUnits. This object is
+        writable to allow remote configuration of the size of
+        the storage area in those cases where such an
+        operation makes sense and is possible on the
+        underlying system. For example, the amount of main
+        memory allocated to a buffer pool might be modified or
+        the amount of disk space allocated to virtual memory
+        might be modified."
+    ::= { hrStorageEntry 5 }
+
+hrStorageUsed OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of the storage represented by this entry
+        that is allocated, in units of
+        hrStorageAllocationUnits."
+    ::= { hrStorageEntry 6 }
+
+hrStorageAllocationFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of requests for storage represented by
+        this entry that could not be honored due to not enough
+        storage.  It should be noted that as this object has a
+        SYNTAX of Counter32, that it does not have a defined
+        initial value.  However, it is recommended that this
+        object be initialized to zero, even though management
+        stations must not depend on such an initialization."
+    ::= { hrStorageEntry 7 }
+
+-- The Host Resources Device Group
+--
+-- The device group is useful for identifying and diagnosing the
+-- devices on a system.  The hrDeviceTable contains common
+-- information for any type of device.  In addition, some devices
+-- have device-specific tables for more detailed information.  More
+-- such tables may be defined in the future for other device types.
+
+-- Registration point for device types, for use with hrDeviceType.
+
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrDeviceTypes             OBJECT IDENTIFIER ::= { hrDevice 1 }
+
+hrDeviceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrDeviceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of devices contained by the
+        host."
+    ::= { hrDevice 2 }
+
+hrDeviceEntry OBJECT-TYPE
+    SYNTAX     HrDeviceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one device contained by the
+        host.  As an example, an instance of the hrDeviceType
+        object might be named hrDeviceType.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrDeviceTable 1 }
+
+HrDeviceEntry ::= SEQUENCE {
+        hrDeviceIndex           Integer32,
+        hrDeviceType            AutonomousType,
+        hrDeviceDescr           DisplayString,
+        hrDeviceID              ProductID,
+        hrDeviceStatus          INTEGER,
+        hrDeviceErrors          Counter32
+    }
+
+hrDeviceIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each device contained by the host.
+        The value for each device must remain constant at
+        least from one re-initialization of the agent to the
+        next re-initialization."
+    ::= { hrDeviceEntry 1 }
+
+hrDeviceType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication of the type of device.
+
+        If this value is
+        `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
+        exists in the hrProcessorTable which corresponds to
+        this device.
+
+        If this value is
+        `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
+        exists in the hrNetworkTable which corresponds to this
+        device.
+
+        If this value is
+        `hrDevicePrinter { hrDeviceTypes 5 }', then an entry
+        exists in the hrPrinterTable which corresponds to this
+        device.
+
+        If this value is
+        `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
+        entry exists in the hrDiskStorageTable which
+        corresponds to this device."
+    ::= { hrDeviceEntry 2 }
+
+hrDeviceDescr OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this device, including the
+        device's manufacturer and revision, and optionally,
+        its serial number."
+    ::= { hrDeviceEntry 3 }
+
+hrDeviceID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID for this device."
+    ::= { hrDeviceEntry 4 }
+
+hrDeviceStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   running(2),
+                   warning(3),
+                   testing(4),
+                   down(5)
+
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current operational state of the device described
+        by this row of the table.  A value unknown(1)
+        indicates that the current state of the device is
+        unknown.  running(2) indicates that the device is up
+        and running and that no unusual error conditions are
+        known.  The warning(3) state indicates that agent has
+        been informed of an unusual error condition by the
+        operational software (e.g., a disk device driver) but
+        that the device is still 'operational'.  An example
+        would be a high number of soft errors on a disk.  A
+        value of testing(4), indicates that the device is not
+        available for use because it is in the testing state.
+        The state of down(5) is used only when the agent has
+        been informed that the device is not available for any
+        use."
+    ::= { hrDeviceEntry 5 }
+
+hrDeviceErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of errors detected on this device.  It
+        should be noted that as this object has a SYNTAX of
+        Counter32, that it does not have a defined initial
+        value.  However, it is recommended that this object be
+        initialized to zero, even though management stations
+        must not depend on such an initialization."
+    ::= { hrDeviceEntry 6 }
+
+hrProcessorTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrProcessorEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of processors contained by the
+        host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceProcessor'."
+    ::= { hrDevice 3 }
+
+hrProcessorEntry OBJECT-TYPE
+    SYNTAX     HrProcessorEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one processor contained by
+        the host.  The hrDeviceIndex in the index represents
+        the entry in the hrDeviceTable that corresponds to the
+        hrProcessorEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrProcessorFrwID object might be
+        named hrProcessorFrwID.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrProcessorTable 1 }
+
+HrProcessorEntry ::= SEQUENCE {
+        hrProcessorFrwID            ProductID,
+        hrProcessorLoad             Integer32
+    }
+
+hrProcessorFrwID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of the firmware associated with the
+        processor."
+    ::= { hrProcessorEntry 1 }
+
+hrProcessorLoad OBJECT-TYPE
+    SYNTAX     Integer32 (0..100)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The average, over the last minute, of the percentage
+        of time that this processor was not idle.
+        Implementations may approximate this one minute
+        smoothing period if necessary."
+    ::= { hrProcessorEntry 2 }
+
+hrNetworkTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrNetworkEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of network devices contained
+        by the host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceNetwork'."
+    ::= { hrDevice 4 }
+
+hrNetworkEntry OBJECT-TYPE
+    SYNTAX     HrNetworkEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one network device contained
+        by the host.  The hrDeviceIndex in the index
+        represents the entry in the hrDeviceTable that
+        corresponds to the hrNetworkEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrNetworkIfIndex object might be
+        named hrNetworkIfIndex.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrNetworkTable 1 }
+
+HrNetworkEntry ::= SEQUENCE {
+        hrNetworkIfIndex    InterfaceIndexOrZero
+    }
+
+hrNetworkIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of ifIndex which corresponds to this
+        network device. If this device is not represented in
+        the ifTable, then this value shall be zero."
+    ::= { hrNetworkEntry 1 }
+
+hrPrinterTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrPrinterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of printers local to the host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDevicePrinter'."
+    ::= { hrDevice 5 }
+
+hrPrinterEntry OBJECT-TYPE
+    SYNTAX     HrPrinterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one printer local to the
+        host.  The hrDeviceIndex in the index represents the
+        entry in the hrDeviceTable that corresponds to the
+        hrPrinterEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrPrinterStatus object might be
+        named hrPrinterStatus.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrPrinterTable 1 }
+
+HrPrinterEntry ::= SEQUENCE {
+        hrPrinterStatus             INTEGER,
+        hrPrinterDetectedErrorState OCTET STRING
+    }
+
+hrPrinterStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   other(1),
+                   unknown(2),
+                   idle(3),
+                   printing(4),
+                   warmup(5)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current status of this printer device."
+    ::= { hrPrinterEntry 1 }
+
+hrPrinterDetectedErrorState OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "This object represents any error conditions detected
+        by the printer.  The error conditions are encoded as
+        bits in an octet string, with the following
+        definitions:
+
+             Condition         Bit #
+
+             lowPaper              0
+
+             noPaper               1
+             lowToner              2
+             noToner               3
+             doorOpen              4
+             jammed                5
+             offline               6
+             serviceRequested      7
+             inputTrayMissing      8
+             outputTrayMissing     9
+             markerSupplyMissing  10
+             outputNearFull       11
+             outputFull           12
+             inputTrayEmpty       13
+             overduePreventMaint  14
+
+        Bits are numbered starting with the most significant
+        bit of the first byte being bit 0, the least
+        significant bit of the first byte being bit 7, the
+        most significant bit of the second byte being bit 8,
+        and so on.  A one bit encodes that the condition was
+        detected, while a zero bit encodes that the condition
+        was not detected.
+
+        This object is useful for alerting an operator to
+        specific warning or error conditions that may occur,
+        especially those requiring human intervention."
+    ::= { hrPrinterEntry 2 }
+
+hrDiskStorageTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrDiskStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of long-term storage devices
+        contained by the host.  In particular, disk devices
+        accessed remotely over a network are not included
+        here.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceDiskStorage'."
+    ::= { hrDevice 6 }
+
+hrDiskStorageEntry OBJECT-TYPE
+    SYNTAX     HrDiskStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one long-term storage device
+        contained by the host.  The hrDeviceIndex in the index
+        represents the entry in the hrDeviceTable that
+        corresponds to the hrDiskStorageEntry. As an example,
+        an instance of the hrDiskStorageCapacity object might
+        be named hrDiskStorageCapacity.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrDiskStorageTable 1 }
+
+HrDiskStorageEntry ::= SEQUENCE {
+        hrDiskStorageAccess         INTEGER,
+        hrDiskStorageMedia          INTEGER,
+        hrDiskStorageRemoveble      TruthValue,
+        hrDiskStorageCapacity       KBytes
+    }
+
+hrDiskStorageAccess OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   readWrite(1),
+                   readOnly(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication if this long-term storage device is
+        readable and writable or only readable.  This should
+        reflect the media type, any write-protect mechanism,
+        and any device configuration that affects the entire
+        device."
+    ::= { hrDiskStorageEntry 1 }
+
+hrDiskStorageMedia OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   other(1),
+                   unknown(2),
+                   hardDisk(3),
+                   floppyDisk(4),
+                   opticalDiskROM(5),
+                   opticalDiskWORM(6),     -- Write Once Read Many
+                   opticalDiskRW(7),
+                   ramDisk(8)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication of the type of media used in this long-
+        term storage device."
+    ::= { hrDiskStorageEntry 2 }
+
+hrDiskStorageRemoveble OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Denotes whether or not the disk media may be removed
+        from the drive."
+    ::= { hrDiskStorageEntry 3 }
+
+hrDiskStorageCapacity OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total size for this long-term storage device. If
+        the media is removable and is currently removed, this
+        value should be zero."
+    ::= { hrDiskStorageEntry 4 }
+
+hrPartitionTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrPartitionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of partitions for long-term
+        storage devices contained by the host.  In particular,
+        partitions accessed remotely over a network are not
+        included here."
+    ::= { hrDevice 7 }
+
+hrPartitionEntry OBJECT-TYPE
+    SYNTAX     HrPartitionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one partition.  The
+        hrDeviceIndex in the index represents the entry in the
+        hrDeviceTable that corresponds to the
+        hrPartitionEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrPartitionSize object might be
+        named hrPartitionSize.3.1"
+    INDEX { hrDeviceIndex, hrPartitionIndex }
+    ::= { hrPartitionTable 1 }
+
+HrPartitionEntry ::= SEQUENCE {
+        hrPartitionIndex                Integer32,
+        hrPartitionLabel                InternationalDisplayString,
+        hrPartitionID                   OCTET STRING,
+        hrPartitionSize                 KBytes,
+        hrPartitionFSIndex              Integer32
+    }
+
+hrPartitionIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each partition on this long-term
+        storage device.  The value for each long-term storage
+        device must remain constant at least from one re-
+        initialization of the agent to the next re-
+        initialization."
+    ::= { hrPartitionEntry 1 }
+
+hrPartitionLabel OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this partition."
+    ::= { hrPartitionEntry 2 }
+
+hrPartitionID OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A descriptor which uniquely represents this partition
+        to the responsible operating system.  On some systems,
+        this might take on a binary representation."
+    ::= { hrPartitionEntry 3 }
+
+hrPartitionSize OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The size of this partition."
+    ::= { hrPartitionEntry 4 }
+
+hrPartitionFSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index of the file system mounted on this
+        partition.  If no file system is mounted on this
+        partition, then this value shall be zero.  Note that
+        multiple partitions may point to one file system,
+        denoting that that file system resides on those
+        partitions.  Multiple file systems may not reside on
+        one partition."
+    ::= { hrPartitionEntry 5 }
+
+-- The File System Table
+
+-- Registration point for popular File System types,
+-- for use with hrFSType. These are defined in the
+-- HOST-RESOURCES-TYPES module.
+hrFSTypes               OBJECT IDENTIFIER ::= { hrDevice 9 }
+
+hrFSTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrFSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of file systems local to this
+        host or remotely mounted from a file server.  File
+        systems that are in only one user's environment on a
+        multi-user system will not be included in this table."
+    ::= { hrDevice 8 }
+
+hrFSEntry OBJECT-TYPE
+    SYNTAX     HrFSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one file system local to
+        this host or remotely mounted from a file server.
+        File systems that are in only one user's environment
+        on a multi-user system will not be included in this
+        table.
+
+        As an example of how objects in this table are named,
+        an instance of the hrFSMountPoint object might be
+        named hrFSMountPoint.3"
+    INDEX { hrFSIndex }
+    ::= { hrFSTable 1 }
+
+HrFSEntry ::= SEQUENCE {
+        hrFSIndex                   Integer32,
+        hrFSMountPoint              InternationalDisplayString,
+        hrFSRemoteMountPoint        InternationalDisplayString,
+        hrFSType                    AutonomousType,
+        hrFSAccess                  INTEGER,
+        hrFSBootable                TruthValue,
+        hrFSStorageIndex            Integer32,
+        hrFSLastFullBackupDate      DateAndTime,
+        hrFSLastPartialBackupDate   DateAndTime
+    }
+
+hrFSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each file system local to this
+        host.  The value for each file system must remain
+        constant at least from one re-initialization of the
+        agent to the next re-initialization."
+    ::= { hrFSEntry 1 }
+
+hrFSMountPoint OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The path name of the root of this file system."
+    ::= { hrFSEntry 2 }
+
+hrFSRemoteMountPoint OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the name and/or address of the
+        server that this file system is mounted from.  This
+        may also include parameters such as the mount point on
+        the remote file system.  If this is not a remote file
+        system, this string should have a length of zero."
+    ::= { hrFSEntry 3 }
+
+hrFSType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of this object identifies the type of this
+        file system."
+    ::= { hrFSEntry 4 }
+
+hrFSAccess OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   readWrite(1),
+                   readOnly(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication if this file system is logically
+        configured by the operating system to be readable and
+        writable or only readable.  This does not represent
+        any local access-control policy, except one that is
+        applied to the file system as a whole."
+    ::= { hrFSEntry 5 }
+
+hrFSBootable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A flag indicating whether this file system is
+        bootable."
+    ::= { hrFSEntry 6 }
+
+hrFSStorageIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index of the hrStorageEntry that represents
+        information about this file system.  If there is no
+        such information available, then this value shall be
+        zero.  The relevant storage entry will be useful in
+        tracking the percent usage of this file system and
+        diagnosing errors that may occur when it runs out of
+        space."
+    ::= { hrFSEntry 7 }
+
+hrFSLastFullBackupDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The last date at which this complete file system was
+
+        copied to another storage device for backup.  This
+        information is useful for ensuring that backups are
+        being performed regularly.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrFSEntry 8 }
+
+hrFSLastPartialBackupDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The last date at which a portion of this file system
+        was copied to another storage device for backup.  This
+        information is useful for ensuring that backups are
+        being performed regularly.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrFSEntry 9 }
+
+-- The Host Resources Running Software Group
+--
+-- The hrSWRunTable contains an entry for each distinct piece of
+-- software that is running or loaded into physical or virtual
+-- memory in preparation for running.  This includes the host's
+-- operating system, device drivers, and applications.
+
+hrSWOSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of the hrSWRunIndex for the hrSWRunEntry
+        that represents the primary operating system running
+        on this host.  This object is useful for quickly and
+        uniquely identifying that primary operating system."
+    ::= { hrSWRun 1 }
+
+hrSWRunTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWRunEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of software running on the
+        host."
+    ::= { hrSWRun 2 }
+
+hrSWRunEntry OBJECT-TYPE
+    SYNTAX     HrSWRunEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one piece of software
+        running on the host Note that because the installed
+        software table only contains information for software
+        stored locally on this host, not every piece of
+        running software will be found in the installed
+        software table.  This is true of software that was
+        loaded and run from a non-local source, such as a
+        network-mounted file system.
+
+        As an example of how objects in this table are named,
+        an instance of the hrSWRunName object might be named
+        hrSWRunName.1287"
+    INDEX { hrSWRunIndex }
+    ::= { hrSWRunTable 1 }
+
+HrSWRunEntry ::= SEQUENCE {
+        hrSWRunIndex       Integer32,
+        hrSWRunName        InternationalDisplayString,
+        hrSWRunID          ProductID,
+        hrSWRunPath        InternationalDisplayString,
+        hrSWRunParameters  InternationalDisplayString,
+        hrSWRunType        INTEGER,
+        hrSWRunStatus      INTEGER
+    }
+
+hrSWRunIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each piece of software running on
+        the host.  Wherever possible, this should be the
+        system's native, unique identification number."
+    ::= { hrSWRunEntry 1 }
+
+hrSWRunName OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this running piece of
+        software, including the manufacturer, revision,  and
+        the name by which it is commonly known.  If this
+        software was installed locally, this should be the
+        same string as used in the corresponding
+        hrSWInstalledName."
+    ::= { hrSWRunEntry 2 }
+
+hrSWRunID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of this running piece of software."
+    ::= { hrSWRunEntry 3 }
+
+hrSWRunPath OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the location on long-term storage
+        (e.g. a disk drive) from which this software was
+        loaded."
+    ::= { hrSWRunEntry 4 }
+
+hrSWRunParameters OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the parameters supplied to this
+        software when it was initially loaded."
+    ::= { hrSWRunEntry 5 }
+
+hrSWRunType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   operatingSystem(2),
+                   deviceDriver(3),
+                   application(4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this software."
+    ::= { hrSWRunEntry 6 }
+
+hrSWRunStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   running(1),
+                   runnable(2),    -- waiting for resource
+                                   -- (i.e., CPU, memory, IO)
+                   notRunnable(3), -- loaded but waiting for event
+                   invalid(4)      -- not loaded
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The status of this running piece of software.
+        Setting this value to invalid(4) shall cause this
+        software to stop running and to be unloaded. Sets to
+        other values are not valid."
+    ::= { hrSWRunEntry 7 }
+
+-- The Host Resources Running Software Performance Group
+--
+-- The hrSWRunPerfTable contains an entry corresponding to
+-- each entry in the hrSWRunTable.
+
+hrSWRunPerfTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWRunPerfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of running software
+        performance metrics."
+    ::= { hrSWRunPerf 1 }
+
+hrSWRunPerfEntry OBJECT-TYPE
+    SYNTAX     HrSWRunPerfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry containing software performance
+        metrics.  As an example, an instance of the
+        hrSWRunPerfCPU object might be named
+        hrSWRunPerfCPU.1287"
+    AUGMENTS { hrSWRunEntry }  -- This table augments information in
+                               -- the hrSWRunTable.
+    ::= { hrSWRunPerfTable 1 }
+
+HrSWRunPerfEntry ::= SEQUENCE {
+        hrSWRunPerfCPU          Integer32,
+        hrSWRunPerfMem          KBytes
+}
+
+hrSWRunPerfCPU OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of centi-seconds of the total system's CPU
+        resources consumed by this process.  Note that on a
+        multi-processor system, this value may increment by
+        more than one centi-second in one centi-second of real
+        (wall clock) time."
+    ::= { hrSWRunPerfEntry 1 }
+
+hrSWRunPerfMem OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total amount of real system memory allocated to
+        this process."
+    ::= { hrSWRunPerfEntry 2 }
+
+-- The Host Resources Installed Software Group
+--
+-- The hrSWInstalledTable contains an entry for each piece
+-- of software installed in long-term storage (e.g. a disk
+-- drive) locally on this host.  Note that this does not
+-- include software loadable remotely from a network
+-- server.
+--
+-- Different implementations may track software in varying
+-- ways. For example, while some implementations may track
+-- executable files as distinct pieces of software, other
+-- implementations may use other strategies such as keeping
+-- track of software "packages" (e.g., related groups of files)
+-- or keeping track of system or application "patches".
+--
+-- This table is useful for identifying and inventorying
+-- software on a host and for diagnosing incompatibility
+-- and version mismatch problems between various pieces
+-- of hardware and software.
+
+hrSWInstalledLastChange OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when an entry in the
+        hrSWInstalledTable was last added, renamed, or
+        deleted.  Because this table is likely to contain many
+        entries, polling of this object allows a management
+        station to determine when re-downloading of the table
+        might be useful."
+    ::= { hrSWInstalled 1 }
+
+hrSWInstalledLastUpdateTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when the hrSWInstalledTable
+        was last completely updated.  Because caching of this
+        data will be a popular implementation strategy,
+        retrieval of this object allows a management station
+        to obtain a guarantee that no data in this table is
+        older than the indicated time."
+    ::= { hrSWInstalled 2 }
+
+hrSWInstalledTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWInstalledEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of software installed on this
+        host."
+    ::= { hrSWInstalled 3 }
+
+hrSWInstalledEntry OBJECT-TYPE
+    SYNTAX     HrSWInstalledEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for a piece of software
+        installed on this host.
+
+        As an example of how objects in this table are named,
+        an instance of the hrSWInstalledName object might be
+        named hrSWInstalledName.96"
+    INDEX { hrSWInstalledIndex }
+    ::= { hrSWInstalledTable 1 }
+
+HrSWInstalledEntry ::= SEQUENCE {
+        hrSWInstalledIndex       Integer32,
+        hrSWInstalledName        InternationalDisplayString,
+        hrSWInstalledID          ProductID,
+        hrSWInstalledType        INTEGER,
+        hrSWInstalledDate        DateAndTime
+}
+
+hrSWInstalledIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each piece of software installed
+        on the host.  This value shall be in the range from 1
+        to the number of pieces of software installed on the
+        host."
+    ::= { hrSWInstalledEntry 1 }
+
+hrSWInstalledName OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this installed piece of
+        software, including the manufacturer, revision, the
+        name by which it is commonly known, and optionally,
+        its serial number."
+    ::= { hrSWInstalledEntry 2 }
+
+hrSWInstalledID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of this installed piece of software."
+    ::= { hrSWInstalledEntry 3 }
+
+hrSWInstalledType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   operatingSystem(2),
+                   deviceDriver(3),
+                   application(4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this software."
+    ::= { hrSWInstalledEntry 4 }
+
+hrSWInstalledDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The last-modification date of this application as it
+        would appear in a directory listing.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrSWInstalledEntry 5 }
+
+-- Conformance information
+
+hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 }
+hrMIBGroups      OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 }
+
+-- Compliance Statements
+hrMIBCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The requirements for conformance to the Host Resources MIB."
+    MODULE -- this module
+      MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup,
+                         hrDeviceGroup }
+
+      OBJECT hrSystemDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrSystemInitialLoadDevice
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrSystemInitialLoadParameters
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrStorageSize
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrFSLastFullBackupDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrFSLastPartialBackupDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      GROUP hrSWRunGroup
+          DESCRIPTION
+              "The Running Software Group. Implementation
+              of this group is mandatory only when the
+              hrSWRunPerfGroup is implemented."
+
+      OBJECT hrSWRunStatus
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      GROUP hrSWRunPerfGroup
+          DESCRIPTION
+              "The Running Software Performance Group.
+              Implementation of this group is at the discretion
+              of the implementor."
+
+      GROUP hrSWInstalledGroup
+          DESCRIPTION
+              "The Installed Software Group.
+              Implementation of this group is at the discretion
+              of the implementor."
+    ::= { hrMIBCompliances 1 }
+
+    hrSystemGroup OBJECT-GROUP
+        OBJECTS {
+            hrSystemUptime, hrSystemDate,
+            hrSystemInitialLoadDevice,
+            hrSystemInitialLoadParameters,
+            hrSystemNumUsers, hrSystemProcesses,
+            hrSystemMaxProcesses
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources System Group."
+        ::= { hrMIBGroups 1 }
+
+    hrStorageGroup OBJECT-GROUP
+        OBJECTS {
+            hrMemorySize, hrStorageIndex, hrStorageType,
+            hrStorageDescr, hrStorageAllocationUnits,
+            hrStorageSize, hrStorageUsed,
+            hrStorageAllocationFailures
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Storage Group."
+        ::= { hrMIBGroups 2 }
+
+    hrDeviceGroup OBJECT-GROUP
+        OBJECTS {
+            hrDeviceIndex, hrDeviceType, hrDeviceDescr,
+            hrDeviceID, hrDeviceStatus, hrDeviceErrors,
+            hrProcessorFrwID, hrProcessorLoad,
+            hrNetworkIfIndex, hrPrinterStatus,
+            hrPrinterDetectedErrorState,
+            hrDiskStorageAccess, hrDiskStorageMedia,
+            hrDiskStorageRemoveble, hrDiskStorageCapacity,
+            hrPartitionIndex, hrPartitionLabel,
+            hrPartitionID, hrPartitionSize,
+            hrPartitionFSIndex, hrFSIndex, hrFSMountPoint,
+            hrFSRemoteMountPoint, hrFSType, hrFSAccess,
+            hrFSBootable, hrFSStorageIndex,
+            hrFSLastFullBackupDate,
+            hrFSLastPartialBackupDate
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Device Group."
+        ::= { hrMIBGroups 3 }
+
+    hrSWRunGroup OBJECT-GROUP
+        OBJECTS {
+            hrSWOSIndex, hrSWRunIndex, hrSWRunName,
+            hrSWRunID, hrSWRunPath, hrSWRunParameters,
+            hrSWRunType, hrSWRunStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Running Software Group."
+        ::= { hrMIBGroups 4 }
+
+    hrSWRunPerfGroup OBJECT-GROUP
+        OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Running Software
+            Performance Group."
+        ::= { hrMIBGroups 5 }
+
+    hrSWInstalledGroup OBJECT-GROUP
+        OBJECTS {
+            hrSWInstalledLastChange,
+            hrSWInstalledLastUpdateTime,
+            hrSWInstalledIndex, hrSWInstalledName,
+            hrSWInstalledID, hrSWInstalledType,
+            hrSWInstalledDate
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Installed Software Group."
+        ::= { hrMIBGroups 6 }
+
+END
diff --git a/share/snmp/IANA-RTPROTO-MIB.txt b/share/snmp/IANA-RTPROTO-MIB.txt
new file mode 100644
index 00000000000..571ed2f5c01
--- /dev/null
+++ b/share/snmp/IANA-RTPROTO-MIB.txt
@@ -0,0 +1,102 @@
+IANA-RTPROTO-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2           FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION               FROM SNMPv2-TC;
+
+ianaRtProtoMIB  MODULE-IDENTITY
+    LAST-UPDATED "201604250000Z" -- April 25, 2016
+    ORGANIZATION "IANA"
+    CONTACT-INFO
+            " Internet Assigned Numbers Authority
+              Internet Corporation for Assigned Names and Numbers
+              12025 Waterfront Drive, Suite 300
+              Los Angeles, CA 90094-2536
+
+              Phone: +1 310 301 5800
+              EMail: iana&iana.org"
+    DESCRIPTION
+            "This MIB module defines the IANAipRouteProtocol and
+            IANAipMRouteProtocol textual conventions for use in MIBs
+            which need to identify unicast or multicast routing
+            mechanisms.
+
+            Any additions or changes to the contents of this MIB module
+            require either publication of an RFC, or Designated Expert
+            Review as defined in RFC 2434, Guidelines for Writing an
+            IANA Considerations Section in RFCs.  The Designated Expert
+            will be selected by the IESG Area Director(s) of the Routing
+            Area."
+
+    REVISION     "201604250000Z"  -- April 25, 2016
+    DESCRIPTION  "Corrected typographical error in revision date."
+
+    REVISION     "201604060000Z"  -- April 6, 2016
+    DESCRIPTION  "Added ttdp(20)."
+
+    REVISION     "201208300000Z"  -- August 30, 2012
+    DESCRIPTION  "Added dhcp(19)."
+
+    REVISION     "201107220000Z"  -- July 22, 2011
+    DESCRIPTION  "Added rpl(18) ."
+
+    REVISION     "200009260000Z"  -- September 26, 2000
+    DESCRIPTION  "Original version, published in coordination
+                 with RFC 2932."
+    ::= { mib-2 84 }
+
+IANAipRouteProtocol ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+            "A mechanism for learning routes.  Inclusion of values for
+            routing protocols is not intended to imply that those
+            protocols need be supported."
+   SYNTAX      INTEGER {
+                other     (1),  -- not specified
+                local     (2),  -- local interface
+                netmgmt   (3),  -- static route
+                icmp      (4),  -- result of ICMP Redirect
+
+                        -- the following are all dynamic
+                        -- routing protocols
+
+                egp        (5),  -- Exterior Gateway Protocol
+                ggp        (6),  -- Gateway-Gateway Protocol
+                hello      (7),  -- FuzzBall HelloSpeak
+                rip        (8),  -- Berkeley RIP or RIP-II
+                isIs       (9),  -- Dual IS-IS
+                esIs       (10), -- ISO 9542
+                ciscoIgrp  (11), -- Cisco IGRP
+                bbnSpfIgp  (12), -- BBN SPF IGP
+                ospf       (13), -- Open Shortest Path First
+                bgp        (14), -- Border Gateway Protocol
+                idpr       (15), -- InterDomain Policy Routing
+                ciscoEigrp (16), -- Cisco EIGRP
+                dvmrp      (17), -- DVMRP
+                rpl        (18), -- RPL [RFC-ietf-roll-rpl-19]
+                dhcp       (19), -- DHCP [RFC2132]
+                ttdp       (20)  -- Train Topology Discovery Protocol (TTDP) [IEC 61375-2-5]
+               }
+
+IANAipMRouteProtocol ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+            "The multicast routing protocol.  Inclusion of values for
+            multicast routing protocols is not intended to imply that
+            those protocols need be supported."
+   SYNTAX      INTEGER {
+                   other(1),          -- none of the following
+                   local(2),          -- e.g., manually configured
+                   netmgmt(3),        -- set via net.mgmt protocol
+                   dvmrp(4),
+                   mospf(5),
+                   pimSparseDense(6), -- PIMv1, both DM and SM
+                   cbt(7),
+                   pimSparseMode(8),  -- PIM-SM
+                   pimDenseMode(9),   -- PIM-DM
+                   igmpOnly(10),
+                   bgmp(11),
+                   msdp(12)
+               }
+
+END
diff --git a/share/snmp/IANA-STORAGE-MEDIA-TYPE-MIB.txt b/share/snmp/IANA-STORAGE-MEDIA-TYPE-MIB.txt
new file mode 100644
index 00000000000..bd46baa2573
--- /dev/null
+++ b/share/snmp/IANA-STORAGE-MEDIA-TYPE-MIB.txt
@@ -0,0 +1,67 @@
+IANA-STORAGE-MEDIA-TYPE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+ianaStorageMediaTypeMIB MODULE-IDENTITY
+    LAST-UPDATED "201510120000Z"        -- 12 October 2015
+    ORGANIZATION "IANA"
+    CONTACT-INFO
+            "Internet Assigned Numbers Authority
+             Postal: ICANN
+                     12025 Waterfront Drive, Suite 300
+                     Los Angeles, CA 90094-2536
+                     United States
+             Tel:    +1 310-301-5800
+             Email: iana&iana.org"
+
+    DESCRIPTION
+            "This MIB module defines Textual Conventions
+            representing the media type of a storage device.
+
+            Copyright (c) 2015 IETF Trust and the persons identified
+            as authors of the code.  All rights reserved.
+
+            Redistribution and use in source and binary forms, with
+            or without modification, is permitted pursuant to, and
+            subject to the license terms contained in, the
+            Simplified BSD License set forth in Section 4.c of the
+            IETF Trust's Legal Provisions Relating to IETF Documents
+            (http://trustee.ietf.org/license-info)."
+
+       REVISION "201510120000Z"        -- 12 October 2015
+       DESCRIPTION
+               "The initial version of this MIB, published as
+               RFC 7666."
+       ::= { mib-2 237 }
+
+IANAStorageMediaType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The media type of a storage device:
+
+            unknown(1)     The media type is unknown, e.g., because
+                           the implementation failed to obtain the
+                           media type from the hypervisor.
+
+            other(2)       The media type is other than those
+                           defined in this conversion.
+
+            hardDisk(3)    The media type is hard disk.
+
+            opticalDisk(4) The media type is optical disk.
+
+            floppyDisk(5)  The media type is floppy disk."
+
+    SYNTAX       INTEGER {
+                    other(1),
+                    unknown(2),
+                    hardDisk(3),
+                    opticalDisk(4),
+                    floppyDisk(5)
+                 }
+
+END
diff --git a/share/snmp/IANAifType-MIB.txt b/share/snmp/IANAifType-MIB.txt
new file mode 100644
index 00000000000..c8e77c42c7f
--- /dev/null
+++ b/share/snmp/IANAifType-MIB.txt
@@ -0,0 +1,774 @@
+   IANAifType-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, mib-2      FROM SNMPv2-SMI
+       TEXTUAL-CONVENTION          FROM SNMPv2-TC;
+
+   ianaifType MODULE-IDENTITY
+       LAST-UPDATED "202208170000Z" -- August 17, 2022
+       ORGANIZATION "IANA"
+       CONTACT-INFO "        Internet Assigned Numbers Authority
+
+                     Postal: ICANN
+                             12025 Waterfront Drive, Suite 300
+                             Los Angeles, CA 90094-2536
+
+                     Tel:    +1 310-301-5800
+                     E-Mail: iana@iana.org"
+       DESCRIPTION  "This MIB module defines the IANAifType Textual
+                     Convention, and thus the enumerated values of
+                     the ifType object defined in MIB-II's ifTable."
+
+       REVISION     "202208170000Z"  -- August 17, 2022
+       DESCRIPTION  "Changed gpon description to refer to G.984."
+
+       REVISION     "202105170000Z"  -- May 17, 2021
+       DESCRIPTION  "Registration of new IANAifType 303."
+
+       REVISION     "202104230000Z"  -- April 23, 2021
+       DESCRIPTION  "Registration of new tunnelType 19 and
+                     combined 2018-06-28 revision statements"
+
+       REVISION     "202104220000Z"  -- April 22, 2021
+       DESCRIPTION  "Registration of new IANAifType 302."
+
+       REVISION     "202102180000Z"  -- February 18, 2021
+       DESCRIPTION  "Registration of new IANAifType 301."
+
+       REVISION     "202008270000Z"  -- August 27, 2020
+       DESCRIPTION  "Updated Interface Types (ifType) registry name."
+
+       REVISION     "202007100000Z"  -- July 10, 2020
+       DESCRIPTION  "Registration of new IANAifType 300."
+
+       REVISION     "202004020000Z"  -- April 2, 2020
+       DESCRIPTION  "Added reference to ifType definitions registry."
+
+       REVISION     "202001100000Z"  -- January 10, 2020
+       DESCRIPTION  "Addition of IANAifType 299."
+
+       REVISION     "201912030000Z"  -- December 3, 2019
+       DESCRIPTION  "Updated email address for IANA"
+
+       REVISION     "201910160000Z"  -- October 16, 2019
+       DESCRIPTION  "Addition of IANAifTypes 297-298."
+
+       REVISION     "201902140000Z"  -- February 14, 2019
+       DESCRIPTION  "Registration of new tunnelType 18."
+
+       REVISION     "201902080000Z"  -- February 8, 2019
+       DESCRIPTION  "Added missing commas for 295-296."
+
+       REVISION     "201901310000Z"  -- January 31, 2019
+       DESCRIPTION  "Registration of new IANAifTypes 295-296."
+
+       REVISION     "201807040000Z"  -- July 4, 2018
+       DESCRIPTION  "Added missing commas for 291-293."
+
+       REVISION     "201806280000Z"  -- June 28, 2018
+       DESCRIPTION  "Registration of new IANAifTypes 293-294."
+
+       REVISION     "201806220000Z"  -- June 22, 2018
+       DESCRIPTION  "Registration of new IANAifType 292."
+
+       REVISION     "201806210000Z"  -- June 21, 2018
+       DESCRIPTION  "Registration of new IANAifType 291."
+
+       REVISION     "201703300000Z"  -- March 30, 2017
+       DESCRIPTION  "Registration of new IANAifType 290."
+
+       REVISION     "201701190000Z"  -- January 19, 2017
+       DESCRIPTION  "Registration of new IANAifType 289."
+
+       REVISION     "201611230000Z"  -- November 23, 2016
+       DESCRIPTION  "Registration of new IANAifTypes 283-288."
+
+       REVISION     "201606160000Z"  -- June 16, 2016
+       DESCRIPTION  "Updated IANAtunnelType DESCRIPTION per RFC 7870"
+
+       REVISION     "201606090000Z"  -- June 9, 2016
+       DESCRIPTION  "Registration of new IANAifType 282."
+
+       REVISION     "201606080000Z"  -- June 8, 2016
+       DESCRIPTION  "Updated description for tunnelType 17."
+
+       REVISION     "201605190000Z"  -- May 19, 2016
+       DESCRIPTION  "Updated description for tunnelType 16."
+
+       REVISION     "201605030000Z"  -- May 3, 2016
+       DESCRIPTION  "Registration of new IANAifType 281."
+
+       REVISION     "201604290000Z"  -- April 29, 2016
+       DESCRIPTION  "Registration of new tunnelTypes 16 and 17."
+
+       REVISION     "201409240000Z"  -- September 24, 2014
+       DESCRIPTION  "Registration of new IANAifType 280."
+
+       REVISION     "201409190000Z"  -- September 19, 2014
+       DESCRIPTION  "Registration of new IANAifType 279."
+
+       REVISION     "201407030000Z"  -- July 3, 2014
+       DESCRIPTION  "Registration of new IANAifTypes 277-278."
+
+       REVISION     "201405220000Z" -- May 22, 2014
+       DESCRIPTION  "Updated contact info."
+
+       REVISION     "201205170000Z"  -- May 17, 2012
+       DESCRIPTION  "Registration of new IANAifType 272."
+
+       REVISION     "201201110000Z"  -- January 11, 2012
+       DESCRIPTION  "Registration of new IANAifTypes 266-271."
+
+       REVISION     "201112180000Z"  -- December 18, 2011
+       DESCRIPTION  "Registration of new IANAifTypes 263-265."
+
+       REVISION     "201110260000Z"  -- October 26, 2011
+       DESCRIPTION  "Registration of new IANAifType 262."
+
+       REVISION     "201109070000Z"  -- September 7, 2011
+       DESCRIPTION  "Registration of new IANAifTypes 260 and 261."
+
+       REVISION     "201107220000Z"  -- July 22, 2011
+       DESCRIPTION  "Registration of new IANAifType 259."
+
+       REVISION     "201106030000Z"  -- June 03, 2011
+       DESCRIPTION  "Registration of new IANAifType 258."
+
+       REVISION     "201009210000Z"  -- September 21, 2010
+       DESCRIPTION  "Registration of new IANAifTypes 256 and 257."
+
+       REVISION     "201007210000Z"  -- July 21, 2010
+       DESCRIPTION  "Registration of new IANAifType 255."
+
+       REVISION     "201002110000Z"  -- February 11, 2010
+       DESCRIPTION  "Registration of new IANAifType 254."
+
+       REVISION     "201002080000Z"  -- February 08, 2010
+       DESCRIPTION  "Registration of new IANAifTypes 252 and 253."
+
+       REVISION     "200905060000Z"  -- May 06, 2009
+       DESCRIPTION  "Registration of new IANAifType 251."
+
+       REVISION     "200902060000Z"  -- February 06, 2009
+       DESCRIPTION  "Registration of new IANAtunnelType 15."
+
+       REVISION     "200810090000Z"  -- October 09, 2008
+       DESCRIPTION  "Registration of new IANAifType 250."
+
+       REVISION     "200808120000Z"  -- August 12, 2008
+       DESCRIPTION  "Registration of new IANAifType 249."
+
+       REVISION     "200807220000Z"  -- July 22, 2008
+       DESCRIPTION  "Registration of new IANAifTypes 247 and 248."
+
+       REVISION     "200806240000Z"  -- June 24, 2008
+       DESCRIPTION  "Registration of new IANAifType 246."
+
+       REVISION     "200805290000Z"  -- May 29, 2008
+       DESCRIPTION  "Registration of new IANAifType 245."
+
+       REVISION     "200709130000Z"  -- September 13, 2007
+       DESCRIPTION  "Registration of new IANAifTypes 243 and 244."
+
+       REVISION     "200705290000Z"  -- May 29, 2007
+       DESCRIPTION  "Changed the description for IANAifType 228."
+
+       REVISION     "200703080000Z"  -- March 08, 2007
+       DESCRIPTION  "Registration of new IANAifType 242."
+
+       REVISION     "200701230000Z"  -- January 23, 2007
+       DESCRIPTION  "Registration of new IANAifTypes 239, 240, and 241."
+
+       REVISION     "200610170000Z"  -- October 17, 2006
+       DESCRIPTION  "Deprecated/Obsoleted IANAifType 230.  Registration of
+                     IANAifType 238."
+
+       REVISION     "200609250000Z"  -- September 25, 2006
+       DESCRIPTION  "Changed the description for IANA ifType
+                     184 and added new IANA ifType 237."
+
+       REVISION     "200608170000Z"  -- August 17, 2006
+       DESCRIPTION  "Changed the descriptions for IANAifTypes
+                     20 and 21."
+
+       REVISION     "200608110000Z"  -- August 11, 2006
+       DESCRIPTION  "Changed the descriptions for IANAifTypes
+                     7, 11, 62, 69, and 117."
+
+       REVISION     "200607250000Z"  -- July 25, 2006
+       DESCRIPTION  "Registration of new IANA ifType 236."
+
+       REVISION     "200606140000Z"  -- June 14, 2006
+       DESCRIPTION  "Registration of new IANA ifType 235."
+
+       REVISION     "200603310000Z"  -- March 31, 2006
+       DESCRIPTION  "Registration of new IANA ifType 234."
+
+       REVISION     "200603300000Z"  -- March 30, 2006
+       DESCRIPTION  "Registration of new IANA ifType 233."
+
+       REVISION     "200512220000Z"  -- December 22, 2005
+       DESCRIPTION  "Registration of new IANA ifTypes 231 and 232."
+
+       REVISION     "200510100000Z"  -- October 10, 2005
+       DESCRIPTION  "Registration of new IANA ifType 230."
+
+       REVISION     "200509090000Z"  -- September 09, 2005
+       DESCRIPTION  "Registration of new IANA ifType 229."
+
+       REVISION     "200505270000Z"  -- May 27, 2005
+       DESCRIPTION  "Registration of new IANA ifType 228."
+
+       REVISION     "200503030000Z"  -- March 3, 2005
+       DESCRIPTION  "Added the IANAtunnelType TC and deprecated
+                         IANAifType sixToFour (215) per RFC4087."
+
+       REVISION     "200411220000Z"  -- November 22, 2004
+       DESCRIPTION  "Registration of new IANA ifType 227 per RFC4631."
+
+       REVISION     "200406170000Z"  -- June 17, 2004
+       DESCRIPTION  "Registration of new IANA ifType 226."
+
+       REVISION     "200405120000Z"  -- May 12, 2004
+       DESCRIPTION  "Added description for IANAifType 6, and
+                         changed the descriptions for IANAifTypes
+                     180, 181, and 182."
+
+       REVISION     "200405070000Z"  -- May 7, 2004
+       DESCRIPTION  "Registration of new IANAifType 225."
+
+       REVISION     "200308250000Z"  -- Aug 25, 2003
+       DESCRIPTION  "Deprecated IANAifTypes 7 and 11. Obsoleted
+                     IANAifTypes 62, 69, and 117.  ethernetCsmacd (6)
+                     should be used instead of these values"
+
+       REVISION     "200308180000Z"  -- Aug 18, 2003
+       DESCRIPTION  "Registration of new IANAifType
+                     224."
+
+       REVISION     "200308070000Z"  -- Aug 7, 2003
+       DESCRIPTION  "Registration of new IANAifTypes
+                     222 and 223."
+
+       REVISION     "200303180000Z"  -- Mar 18, 2003
+       DESCRIPTION  "Registration of new IANAifType
+                     221."
+
+       REVISION     "200301130000Z"  -- Jan 13, 2003
+       DESCRIPTION  "Registration of new IANAifType
+                     220."
+
+       REVISION     "200210170000Z"  -- Oct 17, 2002
+       DESCRIPTION  "Registration of new IANAifType
+                     219."
+
+       REVISION     "200207160000Z"  -- Jul 16, 2002
+       DESCRIPTION  "Registration of new IANAifTypes
+                     217 and 218."
+
+       REVISION     "200207100000Z"  -- Jul 10, 2002
+       DESCRIPTION  "Registration of new IANAifTypes
+                     215 and 216."
+
+       REVISION     "200206190000Z"  -- Jun 19, 2002
+       DESCRIPTION  "Registration of new IANAifType
+                     214."
+
+       REVISION     "200201040000Z"  -- Jan 4, 2002
+       DESCRIPTION  "Registration of new IANAifTypes
+                     211, 212 and 213."
+
+       REVISION     "200112200000Z"  -- Dec 20, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     209 and 210."
+
+       REVISION     "200111150000Z"  -- Nov 15, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     207 and 208."
+
+       REVISION     "200111060000Z"  -- Nov 6, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     206."
+
+       REVISION     "200111020000Z"  -- Nov 2, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     205."
+
+       REVISION     "200110160000Z"  -- Oct 16, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     199, 200, 201, 202, 203, and 204."
+
+       REVISION     "200109190000Z"  -- Sept 19, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     198."
+
+       REVISION     "200105110000Z"  -- May 11, 2001
+       DESCRIPTION  "Registration of new IANAifType
+                     197."
+
+       REVISION     "200101120000Z"  -- Jan 12, 2001
+       DESCRIPTION  "Registration of new IANAifTypes
+                     195 and 196."
+
+       REVISION     "200012190000Z"  -- Dec 19, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     193 and 194."
+
+       REVISION     "200012070000Z"  -- Dec 07, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     191 and 192."
+
+       REVISION     "200012040000Z"  -- Dec 04, 2000
+       DESCRIPTION  "Registration of new IANAifType
+                     190."
+
+       REVISION     "200010170000Z"  -- Oct 17, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     188 and 189."
+
+       REVISION     "200010020000Z"  -- Oct 02, 2000
+       DESCRIPTION  "Registration of new IANAifType 187."
+
+       REVISION     "200009010000Z"  -- Sept 01, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     184, 185, and 186."
+
+       REVISION     "200008240000Z"  -- Aug 24, 2000
+       DESCRIPTION  "Registration of new IANAifType 183."
+
+       REVISION     "200008230000Z"  -- Aug 23, 2000
+       DESCRIPTION  "Registration of new IANAifTypes
+                     174-182."
+
+       REVISION     "200008220000Z"  -- Aug 22, 2000
+       DESCRIPTION  "Registration of new IANAifTypes 170,
+                     171, 172 and 173."
+
+       REVISION     "200004250000Z"  -- Apr 25, 2000
+       DESCRIPTION  "Registration of new IANAifTypes 168 and 169."
+
+       REVISION     "200003060000Z"  -- Mar 6, 2000
+       DESCRIPTION  "Fixed a missing semi-colon in the IMPORT.
+                     Also cleaned up the REVISION log a bit.
+                     It is not complete, but from now on it will
+                     be maintained and kept up to date with each
+                     change to this MIB module."
+
+       REVISION     "199910081430Z"  -- Oct 08, 1999
+       DESCRIPTION  "Include new name assignments up to cnr(85).
+                     This is the first version available via the WWW
+                     at: ftp://ftp.isi.edu/mib/ianaiftype.mib"
+
+       REVISION     "199401310000Z"  -- Jan 31, 1994
+       DESCRIPTION  "Initial version of this MIB as published in
+                     RFC 1573."
+       ::= { mib-2 30 }
+
+   IANAifType ::= TEXTUAL-CONVENTION
+       STATUS       current
+       DESCRIPTION
+               "This data type is used as the syntax of the ifType
+               object in the (updated) definition of MIB-II's
+               ifTable.
+
+               The definition of this textual convention with the
+               addition of newly assigned values is published
+               periodically by the IANA, in either the Assigned
+               Numbers RFC, or some derivative of it specific to
+               Internet Network Management number assignments.  (The
+               latest arrangements can be obtained by contacting the
+               IANA.)
+
+               Interface types must not be directly added to the
+               IANAifType-MIB MIB module.  They must instead be added
+               to the 'Interface Types (ifType)' registry at
+               https://www.iana.org/assignments/smi-numbers.
+
+               The relationship between the assignment of ifType
+               values and of OIDs to particular media-specific MIBs
+               is solely the purview of IANA and is subject to change
+               without notice.  Quite often, a media-specific MIB's
+               OID-subtree assignment within MIB-II's 'transmission'
+               subtree will be the same as its ifType value.
+               However, in some circumstances this will not be the
+               case, and implementors must not pre-assume any
+               specific relationship between ifType values and
+               transmission subtree OIDs."
+       SYNTAX  INTEGER {
+                   other(1),          -- none of the following
+                   regular1822(2),
+                   hdh1822(3),
+                   ddnX25(4),
+                   rfc877x25(5),
+                   ethernetCsmacd(6), -- for all ethernet-like interfaces,
+                                      -- regardless of speed, as per RFC3635
+                   iso88023Csmacd(7), -- Deprecated via RFC3635
+                                      -- ethernetCsmacd (6) should be used instead
+                   iso88024TokenBus(8),
+                   iso88025TokenRing(9),
+                   iso88026Man(10),
+                   starLan(11), -- Deprecated via RFC3635
+                                -- ethernetCsmacd (6) should be used instead
+                   proteon10Mbit(12),
+                   proteon80Mbit(13),
+                   hyperchannel(14),
+                   fddi(15),
+                   lapb(16),
+                   sdlc(17),
+                   ds1(18),            -- DS1-MIB
+                   e1(19),             -- Obsolete see DS1-MIB
+                   basicISDN(20),              -- no longer used
+                                               -- see also RFC2127
+                   primaryISDN(21),            -- no longer used
+                                               -- see also RFC2127
+                   propPointToPointSerial(22), -- proprietary serial
+                   ppp(23),
+                   softwareLoopback(24),
+                   eon(25),            -- CLNP over IP
+                   ethernet3Mbit(26),
+                   nsip(27),           -- XNS over IP
+                   slip(28),           -- generic SLIP
+                   ultra(29),          -- ULTRA technologies
+                   ds3(30),            -- DS3-MIB
+                   sip(31),            -- SMDS, coffee
+                   frameRelay(32),     -- DTE only.
+                   rs232(33),
+                   para(34),           -- parallel-port
+                   arcnet(35),         -- arcnet
+                   arcnetPlus(36),     -- arcnet plus
+                   atm(37),            -- ATM cells
+                   miox25(38),
+                   sonet(39),          -- SONET or SDH
+                   x25ple(40),
+                   iso88022llc(41),
+                   localTalk(42),
+                   smdsDxi(43),
+                   frameRelayService(44),  -- FRNETSERV-MIB
+                   v35(45),
+                   hssi(46),
+                   hippi(47),
+                   modem(48),          -- Generic modem
+                   aal5(49),           -- AAL5 over ATM
+                   sonetPath(50),
+                   sonetVT(51),
+                   smdsIcip(52),       -- SMDS InterCarrier Interface
+                   propVirtual(53),    -- proprietary virtual/internal
+                   propMultiplexor(54),-- proprietary multiplexing
+                   ieee80212(55),      -- 100BaseVG
+                   fibreChannel(56),   -- Fibre Channel
+                   hippiInterface(57), -- HIPPI interfaces
+                   frameRelayInterconnect(58), -- Obsolete, use either
+                                       -- frameRelay(32) or
+                                       -- frameRelayService(44).
+                   aflane8023(59),     -- ATM Emulated LAN for 802.3
+                   aflane8025(60),     -- ATM Emulated LAN for 802.5
+                   cctEmul(61),        -- ATM Emulated circuit
+                   fastEther(62),      -- Obsoleted via RFC3635
+                                       -- ethernetCsmacd (6) should be used instead
+                   isdn(63),           -- ISDN and X.25
+                   v11(64),            -- CCITT V.11/X.21
+                   v36(65),            -- CCITT V.36
+                   g703at64k(66),      -- CCITT G703 at 64Kbps
+                   g703at2mb(67),      -- Obsolete see DS1-MIB
+                   qllc(68),           -- SNA QLLC
+                   fastEtherFX(69),    -- Obsoleted via RFC3635
+                                       -- ethernetCsmacd (6) should be used instead
+                   channel(70),        -- channel
+                   ieee80211(71),      -- radio spread spectrum
+                   ibm370parChan(72),  -- IBM System 360/370 OEMI Channel
+                   escon(73),          -- IBM Enterprise Systems Connection
+                   dlsw(74),           -- Data Link Switching
+                   isdns(75),          -- ISDN S/T interface
+                   isdnu(76),          -- ISDN U interface
+                   lapd(77),           -- Link Access Protocol D
+                   ipSwitch(78),       -- IP Switching Objects
+                   rsrb(79),           -- Remote Source Route Bridging
+                   atmLogical(80),     -- ATM Logical Port
+                   ds0(81),            -- Digital Signal Level 0
+                   ds0Bundle(82),      -- group of ds0s on the same ds1
+                   bsc(83),            -- Bisynchronous Protocol
+                   async(84),          -- Asynchronous Protocol
+                   cnr(85),            -- Combat Net Radio
+                   iso88025Dtr(86),    -- ISO 802.5r DTR
+                   eplrs(87),          -- Ext Pos Loc Report Sys
+                   arap(88),           -- Appletalk Remote Access Protocol
+                   propCnls(89),       -- Proprietary Connectionless Protocol
+                   hostPad(90),        -- CCITT-ITU X.29 PAD Protocol
+                   termPad(91),        -- CCITT-ITU X.3 PAD Facility
+                   frameRelayMPI(92),  -- Multiproto Interconnect over FR
+                   x213(93),           -- CCITT-ITU X213
+                   adsl(94),           -- Asymmetric Digital Subscriber Loop
+                   radsl(95),          -- Rate-Adapt. Digital Subscriber Loop
+                   sdsl(96),           -- Symmetric Digital Subscriber Loop
+                   vdsl(97),           -- Very H-Speed Digital Subscrib. Loop
+                   iso88025CRFPInt(98), -- ISO 802.5 CRFP
+                   myrinet(99),        -- Myricom Myrinet
+                   voiceEM(100),       -- voice recEive and transMit
+                   voiceFXO(101),      -- voice Foreign Exchange Office
+                   voiceFXS(102),      -- voice Foreign Exchange Station
+                   voiceEncap(103),    -- voice encapsulation
+                   voiceOverIp(104),   -- voice over IP encapsulation
+                   atmDxi(105),        -- ATM DXI
+                   atmFuni(106),       -- ATM FUNI
+                   atmIma (107),       -- ATM IMA
+                   pppMultilinkBundle(108), -- PPP Multilink Bundle
+                   ipOverCdlc (109),   -- IBM ipOverCdlc
+                   ipOverClaw (110),   -- IBM Common Link Access to Workstn
+                   stackToStack (111), -- IBM stackToStack
+                   virtualIpAddress (112), -- IBM VIPA
+                   mpc (113),          -- IBM multi-protocol channel support
+                   ipOverAtm (114),    -- IBM ipOverAtm
+                   iso88025Fiber (115), -- ISO 802.5j Fiber Token Ring
+                   tdlc (116),         -- IBM twinaxial data link control
+                   gigabitEthernet (117), -- Obsoleted via RFC3635
+                                          -- ethernetCsmacd (6) should be used instead
+                   hdlc (118),         -- HDLC
+                   lapf (119),         -- LAP F
+                   v37 (120),          -- V.37
+                   x25mlp (121),       -- Multi-Link Protocol
+                   x25huntGroup (122), -- X25 Hunt Group
+                   transpHdlc (123),   -- Transp HDLC
+                   interleave (124),   -- Interleave channel
+                   fast (125),         -- Fast channel
+                   ip (126),           -- IP (for APPN HPR in IP networks)
+                   docsCableMaclayer (127),  -- CATV Mac Layer
+                   docsCableDownstream (128), -- CATV Downstream interface
+                   docsCableUpstream (129),  -- CATV Upstream interface
+                   a12MppSwitch (130), -- Avalon Parallel Processor
+                   tunnel (131),       -- Encapsulation interface
+                   coffee (132),       -- coffee pot
+                   ces (133),          -- Circuit Emulation Service
+                   atmSubInterface (134), -- ATM Sub Interface
+                   l2vlan (135),       -- Layer 2 Virtual LAN using 802.1Q
+                   l3ipvlan (136),     -- Layer 3 Virtual LAN using IP
+                   l3ipxvlan (137),    -- Layer 3 Virtual LAN using IPX
+                   digitalPowerline (138), -- IP over Power Lines
+                   mediaMailOverIp (139), -- Multimedia Mail over IP
+                   dtm (140),        -- Dynamic syncronous Transfer Mode
+                   dcn (141),    -- Data Communications Network
+                   ipForward (142),    -- IP Forwarding Interface
+                   msdsl (143),       -- Multi-rate Symmetric DSL
+                   ieee1394 (144), -- IEEE1394 High Performance Serial Bus
+                   if-gsn (145),       --   HIPPI-6400
+                   dvbRccMacLayer (146), -- DVB-RCC MAC Layer
+                   dvbRccDownstream (147),  -- DVB-RCC Downstream Channel
+                   dvbRccUpstream (148),  -- DVB-RCC Upstream Channel
+                   atmVirtual (149),   -- ATM Virtual Interface
+                   mplsTunnel (150),   -- MPLS Tunnel Virtual Interface
+                   srp (151),   -- Spatial Reuse Protocol
+                   voiceOverAtm (152),  -- Voice Over ATM
+                   voiceOverFrameRelay (153),   -- Voice Over Frame Relay
+                   idsl (154),          -- Digital Subscriber Loop over ISDN
+                   compositeLink (155),  -- Avici Composite Link Interface
+                   ss7SigLink (156),     -- SS7 Signaling Link
+                   propWirelessP2P (157),  --  Prop. P2P wireless interface
+                   frForward (158),    -- Frame Forward Interface
+                   rfc1483 (159),       -- Multiprotocol over ATM AAL5
+                   usb (160),           -- USB Interface
+                   ieee8023adLag (161),  -- IEEE 802.3ad Link Aggregate
+                   bgppolicyaccounting (162), -- BGP Policy Accounting
+                   frf16MfrBundle (163), -- FRF .16 Multilink Frame Relay
+                   h323Gatekeeper (164), -- H323 Gatekeeper
+                   h323Proxy (165), -- H323 Voice and Video Proxy
+                   mpls (166), -- MPLS
+                   mfSigLink (167), -- Multi-frequency signaling link
+                   hdsl2 (168), -- High Bit-Rate DSL - 2nd generation
+                   shdsl (169), -- Multirate HDSL2
+                   ds1FDL (170), -- Facility Data Link 4Kbps on a DS1
+                   pos (171), -- Packet over SONET/SDH Interface
+                   dvbAsiIn (172), -- DVB-ASI Input
+                   dvbAsiOut (173), -- DVB-ASI Output
+                   plc (174), -- Power Line Communtications
+                   nfas (175), -- Non Facility Associated Signaling
+                   tr008 (176), -- TR008
+                   gr303RDT (177), -- Remote Digital Terminal
+                   gr303IDT (178), -- Integrated Digital Terminal
+                   isup (179), -- ISUP
+                   propDocsWirelessMaclayer (180), -- Cisco proprietary Maclayer
+                   propDocsWirelessDownstream (181), -- Cisco proprietary Downstream
+                   propDocsWirelessUpstream (182), -- Cisco proprietary Upstream
+                   hiperlan2 (183), -- HIPERLAN Type 2 Radio Interface
+                   propBWAp2Mp (184), -- PropBroadbandWirelessAccesspt2multipt
+                             -- use of this iftype for IEEE 802.16 WMAN
+                             -- interfaces as per IEEE Std 802.16f is
+                             -- deprecated and ifType 237 should be used instead.
+                   sonetOverheadChannel (185), -- SONET Overhead Channel
+                   digitalWrapperOverheadChannel (186), -- Digital Wrapper
+                   aal2 (187), -- ATM adaptation layer 2
+                   radioMAC (188), -- MAC layer over radio links
+                   atmRadio (189), -- ATM over radio links
+                   imt (190), -- Inter Machine Trunks
+                   mvl (191), -- Multiple Virtual Lines DSL
+                   reachDSL (192), -- Long Reach DSL
+                   frDlciEndPt (193), -- Frame Relay DLCI End Point
+                   atmVciEndPt (194), -- ATM VCI End Point
+                   opticalChannel (195), -- Optical Channel
+                   opticalTransport (196), -- Optical Transport
+                   propAtm (197), --  Proprietary ATM
+                   voiceOverCable (198), -- Voice Over Cable Interface
+                   infiniband (199), -- Infiniband
+                   teLink (200), -- TE Link
+                   q2931 (201), -- Q.2931
+                   virtualTg (202), -- Virtual Trunk Group
+                   sipTg (203), -- SIP Trunk Group
+                   sipSig (204), -- SIP Signaling
+                   docsCableUpstreamChannel (205), -- CATV Upstream Channel
+                   econet (206), -- Acorn Econet
+                   pon155 (207), -- FSAN 155Mb Symetrical PON interface
+                   pon622 (208), -- FSAN622Mb Symetrical PON interface
+                   bridge (209), -- Transparent bridge interface
+                   linegroup (210), -- Interface common to multiple lines
+                   voiceEMFGD (211), -- voice E&M Feature Group D
+                   voiceFGDEANA (212), -- voice FGD Exchange Access North American
+                   voiceDID (213), -- voice Direct Inward Dialing
+                   mpegTransport (214), -- MPEG transport interface
+                   sixToFour (215), -- 6to4 interface (DEPRECATED)
+                   gtp (216), -- GTP (GPRS Tunneling Protocol)
+                   pdnEtherLoop1 (217), -- Paradyne EtherLoop 1
+                   pdnEtherLoop2 (218), -- Paradyne EtherLoop 2
+                   opticalChannelGroup (219), -- Optical Channel Group
+                   homepna (220), -- HomePNA ITU-T G.989
+                   gfp (221), -- Generic Framing Procedure (GFP)
+                   ciscoISLvlan (222), -- Layer 2 Virtual LAN using Cisco ISL
+                   actelisMetaLOOP (223), -- Acteleis proprietary MetaLOOP High Speed Link
+                   fcipLink (224), -- FCIP Link
+                   rpr (225), -- Resilient Packet Ring Interface Type
+                   qam (226), -- RF Qam Interface
+                   lmp (227), -- Link Management Protocol
+                   cblVectaStar (228), -- Cambridge Broadband Networks Limited VectaStar
+                   docsCableMCmtsDownstream (229), -- CATV Modular CMTS Downstream Interface
+                   adsl2 (230), -- Asymmetric Digital Subscriber Loop Version 2
+                                -- (DEPRECATED/OBSOLETED - please use adsl2plus 238 instead)
+                   macSecControlledIF (231), -- MACSecControlled
+                   macSecUncontrolledIF (232), -- MACSecUncontrolled
+                   aviciOpticalEther (233), -- Avici Optical Ethernet Aggregate
+                   atmbond (234), -- atmbond
+                   voiceFGDOS (235), -- voice FGD Operator Services
+                   mocaVersion1 (236), -- MultiMedia over Coax Alliance (MoCA) Interface
+                             -- as documented in information provided privately to IANA
+                   ieee80216WMAN (237), -- IEEE 802.16 WMAN interface
+                   adsl2plus (238), -- Asymmetric Digital Subscriber Loop Version 2,
+                                   -- Version 2 Plus and all variants
+                   dvbRcsMacLayer (239), -- DVB-RCS MAC Layer
+                   dvbTdm (240), -- DVB Satellite TDM
+                   dvbRcsTdma (241), -- DVB-RCS TDMA
+                   x86Laps (242), -- LAPS based on ITU-T X.86/Y.1323
+                   wwanPP (243), -- 3GPP WWAN
+                   wwanPP2 (244), -- 3GPP2 WWAN
+                   voiceEBS (245), -- voice P-phone EBS physical interface
+                   ifPwType (246), -- Pseudowire interface type
+                   ilan (247), -- Internal LAN on a bridge per IEEE 802.1ap
+                   pip (248), -- Provider Instance Port on a bridge per IEEE 802.1ah PBB
+                   aluELP (249), -- Alcatel-Lucent Ethernet Link Protection
+                   gpon (250), -- Gigabit-capable passive optical networks (G-PON) as per ITU-T G.984
+                   vdsl2 (251), -- Very high speed digital subscriber line Version 2 (as per ITU-T Recommendation G.993.2)
+                   capwapDot11Profile (252), -- WLAN Profile Interface
+                   capwapDot11Bss (253), -- WLAN BSS Interface
+                   capwapWtpVirtualRadio (254), -- WTP Virtual Radio Interface
+                   bits (255), -- bitsport
+                   docsCableUpstreamRfPort (256), -- DOCSIS CATV Upstream RF Port
+                   cableDownstreamRfPort (257), -- CATV downstream RF port
+                   vmwareVirtualNic (258), -- VMware Virtual Network Interface
+                   ieee802154 (259), -- IEEE 802.15.4 WPAN interface
+                   otnOdu (260), -- OTN Optical Data Unit
+                   otnOtu (261), -- OTN Optical channel Transport Unit
+                   ifVfiType (262), -- VPLS Forwarding Instance Interface Type
+                   g9981 (263), -- G.998.1 bonded interface
+                   g9982 (264), -- G.998.2 bonded interface
+                   g9983 (265), -- G.998.3 bonded interface
+                   aluEpon (266), -- Ethernet Passive Optical Networks (E-PON)
+                   aluEponOnu (267), -- EPON Optical Network Unit
+                   aluEponPhysicalUni (268), -- EPON physical User to Network interface
+                   aluEponLogicalLink (269), -- The emulation of a point-to-point link over the EPON layer
+                   aluGponOnu (270), -- GPON Optical Network Unit
+                   aluGponPhysicalUni (271), -- GPON physical User to Network interface
+                   vmwareNicTeam (272), -- VMware NIC Team
+                   docsOfdmDownstream (277), -- CATV Downstream OFDM interface
+                   docsOfdmaUpstream (278), -- CATV Upstream OFDMA interface
+                   gfast (279), -- G.fast port
+                   sdci (280), -- SDCI (IO-Link)
+                   xboxWireless (281), -- Xbox wireless
+                   fastdsl (282), -- FastDSL
+                   docsCableScte55d1FwdOob (283), -- Cable SCTE 55-1 OOB Forward Channel
+                   docsCableScte55d1RetOob (284), -- Cable SCTE 55-1 OOB Return Channel
+                   docsCableScte55d2DsOob (285), -- Cable SCTE 55-2 OOB Downstream Channel
+                   docsCableScte55d2UsOob (286), -- Cable SCTE 55-2 OOB Upstream Channel
+                   docsCableNdf (287), -- Cable Narrowband Digital Forward
+                   docsCableNdr (288), -- Cable Narrowband Digital Return
+                   ptm (289), -- Packet Transfer Mode
+                   ghn (290), -- G.hn port
+                   otnOtsi (291), -- Optical Tributary Signal
+                   otnOtuc (292), -- OTN OTUCn
+                   otnOduc (293), -- OTN ODUC
+                   otnOtsig (294), -- OTN OTUC Signal
+                   microwaveCarrierTermination (295), -- air interface of a single microwave carrier
+                   microwaveRadioLinkTerminal (296), -- radio link interface for one or several aggregated microwave carriers
+                   ieee8021axDrni (297), -- IEEE 802.1AX Distributed Resilient Network Interface
+                   ax25 (298), -- AX.25 network interfaces
+                   ieee19061nanocom (299), -- Nanoscale and Molecular Communication
+                   cpri (300), -- Common Public Radio Interface
+                   omni (301), -- Overlay Multilink Network Interface (OMNI)
+                   roe (302), -- Radio over Ethernet Interface
+                   p2pOverLan (303) -- Point to Point over LAN interface
+                   }
+
+IANAtunnelType ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+            "The encapsulation method used by a tunnel. The value
+            direct indicates that a packet is encapsulated
+            directly within a normal IP header, with no
+            intermediate header, and unicast to the remote tunnel
+            endpoint (e.g., an RFC 2003 IP-in-IP tunnel, or an RFC
+            1933 IPv6-in-IPv4 tunnel). The value minimal indicates
+            that a Minimal Forwarding Header (RFC 2004) is
+            inserted between the outer header and the payload
+            packet. The value UDP indicates that the payload
+            packet is encapsulated within a normal UDP packet
+            (e.g., RFC 1234).
+
+            The values sixToFour, sixOverFour, and isatap
+            indicates that an IPv6 packet is encapsulated directly
+            within an IPv4 header, with no intermediate header,
+            and unicast to the destination determined by the 6to4,
+            6over4, or ISATAP protocol.
+
+            The remaining protocol-specific values indicate that a
+            header of the protocol of that name is inserted
+            between the outer header and the payload header.
+
+            The IP Tunnel MIB [RFC4087] is designed to manage
+            tunnels of any type over IPv4 and IPv6 networks;
+            therefore, it already supports IP-in-IP tunnels.
+            But in a DS-Lite scenario, the tunnel type is
+            point-to-multipoint IP-in-IP tunnels.  The direct(2)
+            defined in the IP Tunnel MIB only supports point-to-point
+            tunnels.  So, it needs to define a new tunnel type for
+            DS-Lite.
+
+            The assignment policy for IANAtunnelType values is
+            identical to the policy for assigning IANAifType
+            values."
+    SYNTAX     INTEGER {
+                   other(1),           -- none of the following
+                   direct(2),          -- no intermediate header
+                   gre(3),             -- GRE encapsulation
+                   minimal(4),         -- Minimal encapsulation
+                   l2tp(5),            -- L2TP encapsulation
+                   pptp(6),            -- PPTP encapsulation
+                   l2f(7),             -- L2F encapsulation
+                   udp(8),             -- UDP encapsulation
+                   atmp(9),            -- ATMP encapsulation
+                   msdp(10),           -- MSDP encapsulation
+                   sixToFour(11),      -- 6to4 encapsulation
+                   sixOverFour(12),    -- 6over4 encapsulation
+                   isatap(13),         -- ISATAP encapsulation
+                   teredo(14),         -- Teredo encapsulation
+                   ipHttps(15),        -- IPHTTPS
+                   softwireMesh(16),   -- softwire mesh tunnel
+                   dsLite(17),         -- DS-Lite tunnel
+                   aplusp(18),         -- A+P encapsulation
+                   ipsectunnelmode(19) -- IpSec tunnel mode encapsulation
+               }
+
+   END
diff --git a/share/snmp/IF-MIB.txt b/share/snmp/IF-MIB.txt
new file mode 100644
index 00000000000..7704f0c257e
--- /dev/null
+++ b/share/snmp/IF-MIB.txt
@@ -0,0 +1,1814 @@
+IF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Counter64,
+    Integer32, TimeTicks, mib-2,
+    NOTIFICATION-TYPE                        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, DisplayString,
+    PhysAddress, TruthValue, RowStatus,
+    TimeStamp, AutonomousType, TestAndIncr   FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                       FROM SNMPv2-CONF
+    snmpTraps                                FROM SNMPv2-MIB
+    IANAifType                               FROM IANAifType-MIB;
+
+ifMIB MODULE-IDENTITY
+    LAST-UPDATED "200006140000Z"
+    ORGANIZATION "IETF Interfaces MIB Working Group"
+    CONTACT-INFO
+            "   Keith McCloghrie
+                Cisco Systems, Inc.
+                170 West Tasman Drive
+                San Jose, CA  95134-1706
+                US
+
+                408-526-5260
+                kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module to describe generic objects for network
+            interface sub-layers.  This MIB is an updated version of
+            MIB-II's ifTable, and incorporates the extensions defined in
+            RFC 1229."
+
+    REVISION      "200006140000Z"
+    DESCRIPTION
+            "Clarifications agreed upon by the Interfaces MIB WG, and
+            published as RFC 2863."
+    REVISION      "199602282155Z"
+    DESCRIPTION
+            "Revisions made by the Interfaces MIB WG, and published in
+            RFC 2233."
+    REVISION      "199311082155Z"
+    DESCRIPTION
+            "Initial revision, published as part of RFC 1573."
+    ::= { mib-2 31 }
+
+ifMIBObjects OBJECT IDENTIFIER ::= { ifMIB 1 }
+
+interfaces   OBJECT IDENTIFIER ::= { mib-2 2 }
+
+--
+-- Textual Conventions
+--
+
+-- OwnerString has the same semantics as used in RFC 1271
+
+OwnerString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       deprecated
+    DESCRIPTION
+            "This data type is used to model an administratively
+            assigned name of the owner of a resource.  This information
+            is taken from the NVT ASCII character set.  It is suggested
+            that this name contain one or more of the following: ASCII
+            form of the manager station's transport address, management
+            station name (e.g., domain name), network management
+            personnel's name, location, or phone number.  In some cases
+            the agent itself will be the owner of an entry.  In these
+            cases, this string shall be set to a string starting with
+            'agent'."
+    SYNTAX       OCTET STRING (SIZE(0..255))
+
+-- InterfaceIndex contains the semantics of ifIndex and should be used
+-- for any objects defined in other MIB modules that need these semantics.
+
+InterfaceIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "A unique value, greater than zero, for each interface or
+            interface sub-layer in the managed system.  It is
+            recommended that values are assigned contiguously starting
+            from 1.  The value for each interface sub-layer must remain
+            constant at least from one re-initialization of the entity's
+            network management system to the next re-initialization."
+    SYNTAX       Integer32 (1..2147483647)
+
+InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "This textual convention is an extension of the
+            InterfaceIndex convention.  The latter defines a greater
+            than zero value used to identify an interface or interface
+            sub-layer in the managed system.  This extension permits the
+            additional value of zero.  the value zero is object-specific
+            and must therefore be defined as part of the description of
+            any object which uses this syntax.  Examples of the usage of
+            zero might include situations where interface was unknown,
+            or when none or all interfaces need to be referenced."
+    SYNTAX       Integer32 (0..2147483647)
+
+ifNumber  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of network interfaces (regardless of their
+            current state) present on this system."
+    ::= { interfaces 1 }
+
+ifTableLastChange  OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the last creation or
+            deletion of an entry in the ifTable.  If the number of
+            entries has been unchanged since the last re-initialization
+            of the local network management subsystem, then this object
+            contains a zero value."
+    ::= { ifMIBObjects 5 }
+
+-- the Interfaces table
+
+-- The Interfaces table contains information on the entity's
+
+-- interfaces.  Each sub-layer below the internetwork-layer
+-- of a network interface is considered to be an interface.
+
+ifTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of interface entries.  The number of entries is
+            given by the value of ifNumber."
+    ::= { interfaces 2 }
+
+ifEntry OBJECT-TYPE
+    SYNTAX      IfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing management information applicable to a
+            particular interface."
+    INDEX   { ifIndex }
+    ::= { ifTable 1 }
+
+IfEntry ::=
+    SEQUENCE {
+        ifIndex                 InterfaceIndex,
+        ifDescr                 DisplayString,
+        ifType                  IANAifType,
+        ifMtu                   Integer32,
+        ifSpeed                 Gauge32,
+        ifPhysAddress           PhysAddress,
+        ifAdminStatus           INTEGER,
+        ifOperStatus            INTEGER,
+        ifLastChange            TimeTicks,
+        ifInOctets              Counter32,
+        ifInUcastPkts           Counter32,
+        ifInNUcastPkts          Counter32,  -- deprecated
+        ifInDiscards            Counter32,
+        ifInErrors              Counter32,
+        ifInUnknownProtos       Counter32,
+        ifOutOctets             Counter32,
+        ifOutUcastPkts          Counter32,
+        ifOutNUcastPkts         Counter32,  -- deprecated
+        ifOutDiscards           Counter32,
+        ifOutErrors             Counter32,
+        ifOutQLen               Gauge32,    -- deprecated
+        ifSpecific              OBJECT IDENTIFIER -- deprecated
+    }
+
+ifIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A unique value, greater than zero, for each interface.  It
+            is recommended that values are assigned contiguously
+            starting from 1.  The value for each interface sub-layer
+            must remain constant at least from one re-initialization of
+            the entity's network management system to the next re-
+            initialization."
+    ::= { ifEntry 1 }
+
+ifDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual string containing information about the
+            interface.  This string should include the name of the
+            manufacturer, the product name and the version of the
+            interface hardware/software."
+    ::= { ifEntry 2 }
+
+ifType OBJECT-TYPE
+    SYNTAX      IANAifType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The type of interface.  Additional values for ifType are
+            assigned by the Internet Assigned Numbers Authority (IANA),
+            through updating the syntax of the IANAifType textual
+            convention."
+    ::= { ifEntry 3 }
+
+ifMtu OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The size of the largest packet which can be sent/received
+            on the interface, specified in octets.  For interfaces that
+            are used for transmitting network datagrams, this is the
+            size of the largest network datagram that can be sent on the
+            interface."
+    ::= { ifEntry 4 }
+
+ifSpeed OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An estimate of the interface's current bandwidth in bits
+            per second.  For interfaces which do not vary in bandwidth
+            or for those where no accurate estimation can be made, this
+            object should contain the nominal bandwidth.  If the
+            bandwidth of the interface is greater than the maximum value
+            reportable by this object then this object should report its
+            maximum value (4,294,967,295) and ifHighSpeed must be used
+            to report the interace's speed.  For a sub-layer which has
+            no concept of bandwidth, this object should be zero."
+    ::= { ifEntry 5 }
+
+ifPhysAddress OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The interface's address at its protocol sub-layer.  For
+            example, for an 802.x interface, this object normally
+            contains a MAC address.  The interface's media-specific MIB
+            must define the bit and byte ordering and the format of the
+            value of this object.  For interfaces which do not have such
+            an address (e.g., a serial line), this object should contain
+            an octet string of zero length."
+    ::= { ifEntry 6 }
+
+ifAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),       -- ready to pass packets
+                down(2),
+                testing(3)   -- in some test mode
+            }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The desired state of the interface.  The testing(3) state
+            indicates that no operational packets can be passed.  When a
+            managed system initializes, all interfaces start with
+            ifAdminStatus in the down(2) state.  As a result of either
+            explicit management action or per configuration information
+            retained by the managed system, ifAdminStatus is then
+            changed to either the up(1) or testing(3) states (or remains
+            in the down(2) state)."
+    ::= { ifEntry 7 }
+
+ifOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),        -- ready to pass packets
+                down(2),
+                testing(3),   -- in some test mode
+                unknown(4),   -- status can not be determined
+                              -- for some reason.
+                dormant(5),
+                notPresent(6),    -- some component is missing
+                lowerLayerDown(7) -- down due to state of
+                                  -- lower-layer interface(s)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current operational state of the interface.  The
+            testing(3) state indicates that no operational packets can
+            be passed.  If ifAdminStatus is down(2) then ifOperStatus
+            should be down(2).  If ifAdminStatus is changed to up(1)
+            then ifOperStatus should change to up(1) if the interface is
+            ready to transmit and receive network traffic; it should
+            change to dormant(5) if the interface is waiting for
+            external actions (such as a serial line waiting for an
+            incoming connection); it should remain in the down(2) state
+            if and only if there is a fault that prevents it from going
+            to the up(1) state; it should remain in the notPresent(6)
+            state if the interface has missing (typically, hardware)
+            components."
+    ::= { ifEntry 8 }
+
+ifLastChange OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time the interface entered
+            its current operational state.  If the current state was
+            entered prior to the last re-initialization of the local
+            network management subsystem, then this object contains a
+            zero value."
+    ::= { ifEntry 9 }
+
+ifInOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets received on the interface,
+            including framing characters.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 10 }
+
+ifInUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were not addressed to a multicast
+            or broadcast address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 11 }
+
+ifInNUcastPkts OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast or
+            broadcast address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime.
+
+            This object is deprecated in favour of ifInMulticastPkts and
+            ifInBroadcastPkts."
+    ::= { ifEntry 12 }
+
+ifInDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of inbound packets which were chosen to be
+            discarded even though no errors had been detected to prevent
+
+            their being deliverable to a higher-layer protocol.  One
+            possible reason for discarding such a packet could be to
+            free up buffer space.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 13 }
+
+ifInErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of inbound
+            packets that contained errors preventing them from being
+            deliverable to a higher-layer protocol.  For character-
+            oriented or fixed-length interfaces, the number of inbound
+            transmission units that contained errors preventing them
+            from being deliverable to a higher-layer protocol.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 14 }
+
+ifInUnknownProtos OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of packets
+            received via the interface which were discarded because of
+            an unknown or unsupported protocol.  For character-oriented
+            or fixed-length interfaces that support protocol
+            multiplexing the number of transmission units received via
+            the interface which were discarded because of an unknown or
+            unsupported protocol.  For any interface that does not
+            support protocol multiplexing, this counter will always be
+            0.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 15 }
+
+ifOutOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets transmitted out of the
+            interface, including framing characters.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 16 }
+
+ifOutUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were not addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 17 }
+
+ifOutNUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime.
+
+            This object is deprecated in favour of ifOutMulticastPkts
+            and ifOutBroadcastPkts."
+    ::= { ifEntry 18 }
+
+ifOutDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of outbound packets which were chosen to be
+            discarded even though no errors had been detected to prevent
+            their being transmitted.  One possible reason for discarding
+            such a packet could be to free up buffer space.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 19 }
+
+ifOutErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of outbound
+            packets that could not be transmitted because of errors.
+            For character-oriented or fixed-length interfaces, the
+            number of outbound transmission units that could not be
+            transmitted because of errors.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 20 }
+
+ifOutQLen OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The length of the output packet queue (in packets)."
+    ::= { ifEntry 21 }
+
+ifSpecific OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "A reference to MIB definitions specific to the particular
+            media being used to realize the interface.  It is
+
+            recommended that this value point to an instance of a MIB
+            object in the media-specific MIB, i.e., that this object
+            have the semantics associated with the InstancePointer
+            textual convention defined in RFC 2579.  In fact, it is
+            recommended that the media-specific MIB specify what value
+            ifSpecific should/can take for values of ifType.  If no MIB
+            definitions specific to the particular media are available,
+            the value should be set to the OBJECT IDENTIFIER { 0 0 }."
+    ::= { ifEntry 22 }
+
+--
+--   Extension to the interface table
+--
+-- This table replaces the ifExtnsTable table.
+--
+
+ifXTable        OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfXEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of interface entries.  The number of entries is
+            given by the value of ifNumber.  This table contains
+            additional objects for the interface table."
+    ::= { ifMIBObjects 1 }
+
+ifXEntry        OBJECT-TYPE
+    SYNTAX      IfXEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing additional management information
+            applicable to a particular interface."
+    AUGMENTS    { ifEntry }
+    ::= { ifXTable 1 }
+
+IfXEntry ::=
+    SEQUENCE {
+        ifName                  DisplayString,
+        ifInMulticastPkts       Counter32,
+        ifInBroadcastPkts       Counter32,
+        ifOutMulticastPkts      Counter32,
+        ifOutBroadcastPkts      Counter32,
+        ifHCInOctets            Counter64,
+        ifHCInUcastPkts         Counter64,
+        ifHCInMulticastPkts     Counter64,
+        ifHCInBroadcastPkts     Counter64,
+        ifHCOutOctets           Counter64,
+        ifHCOutUcastPkts        Counter64,
+        ifHCOutMulticastPkts    Counter64,
+        ifHCOutBroadcastPkts    Counter64,
+        ifLinkUpDownTrapEnable  INTEGER,
+        ifHighSpeed             Gauge32,
+        ifPromiscuousMode       TruthValue,
+        ifConnectorPresent      TruthValue,
+        ifAlias                 DisplayString,
+        ifCounterDiscontinuityTime TimeStamp
+    }
+
+ifName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The textual name of the interface.  The value of this
+            object should be the name of the interface as assigned by
+            the local device and should be suitable for use in commands
+            entered at the device's `console'.  This might be a text
+            name, such as `le0' or a simple port number, such as `1',
+            depending on the interface naming syntax of the device.  If
+            several entries in the ifTable together represent a single
+            interface as named by the device, then each will have the
+            same value of ifName.  Note that for an agent which responds
+            to SNMP queries concerning an interface on some other
+            (proxied) device, then the value of ifName for such an
+            interface is the proxied device's local name for it.
+
+            If there is no local name, or this object is otherwise not
+            applicable, then this object contains a zero-length string."
+    ::= { ifXEntry 1 }
+
+ifInMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast
+            address at this sub-layer.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 2 }
+
+ifInBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a broadcast
+            address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 3 }
+
+ifOutMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast address at this sub-layer, including those that
+            were discarded or not sent.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 4 }
+
+ifOutBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            broadcast address at this sub-layer, including those that
+            were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 5 }
+
+--
+-- High Capacity Counter objects.  These objects are all
+-- 64 bit versions of the "basic" ifTable counters.  These
+-- objects all have the same basic semantics as their 32-bit
+-- counterparts, however, their syntax has been extended
+-- to 64 bits.
+--
+
+ifHCInOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets received on the interface,
+            including framing characters.  This object is a 64-bit
+            version of ifInOctets.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 6 }
+
+ifHCInUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were not addressed to a multicast
+            or broadcast address at this sub-layer.  This object is a
+            64-bit version of ifInUcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 7 }
+
+ifHCInMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast
+            address at this sub-layer.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.  This object
+            is a 64-bit version of ifInMulticastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 8 }
+
+ifHCInBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a broadcast
+            address at this sub-layer.  This object is a 64-bit version
+            of ifInBroadcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 9 }
+
+ifHCOutOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets transmitted out of the
+            interface, including framing characters.  This object is a
+            64-bit version of ifOutOctets.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 10 }
+
+ifHCOutUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were not addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.  This object is a
+            64-bit version of ifOutUcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 11 }
+
+ifHCOutMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast address at this sub-layer, including those that
+            were discarded or not sent.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.  This object
+            is a 64-bit version of ifOutMulticastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 12 }
+
+ifHCOutBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            broadcast address at this sub-layer, including those that
+            were discarded or not sent.  This object is a 64-bit version
+            of ifOutBroadcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 13 }
+
+ifLinkUpDownTrapEnable  OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Indicates whether linkUp/linkDown traps should be generated
+            for this interface.
+
+            By default, this object should have the value enabled(1) for
+            interfaces which do not operate on 'top' of any other
+            interface (as defined in the ifStackTable), and disabled(2)
+            otherwise."
+    ::= { ifXEntry 14 }
+
+ifHighSpeed OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An estimate of the interface's current bandwidth in units
+            of 1,000,000 bits per second.  If this object reports a
+            value of `n' then the speed of the interface is somewhere in
+            the range of `n-500,000' to `n+499,999'.  For interfaces
+            which do not vary in bandwidth or for those where no
+            accurate estimation can be made, this object should contain
+            the nominal bandwidth.  For a sub-layer which has no concept
+            of bandwidth, this object should be zero."
+    ::= { ifXEntry 15 }
+
+ifPromiscuousMode  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object has a value of false(2) if this interface only
+            accepts packets/frames that are addressed to this station.
+            This object has a value of true(1) when the station accepts
+            all packets/frames transmitted on the media.  The value
+            true(1) is only legal on certain types of media.  If legal,
+            setting this object to a value of true(1) may require the
+            interface to be reset before becoming effective.
+
+            The value of ifPromiscuousMode does not affect the reception
+            of broadcast and multicast packets/frames by the interface."
+    ::= { ifXEntry 16 }
+
+ifConnectorPresent   OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object has the value 'true(1)' if the interface
+            sublayer has a physical connector and the value 'false(2)'
+            otherwise."
+    ::= { ifXEntry 17 }
+
+ifAlias   OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..64))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object is an 'alias' name for the interface as
+            specified by a network manager, and provides a non-volatile
+            'handle' for the interface.
+
+            On the first instantiation of an interface, the value of
+            ifAlias associated with that interface is the zero-length
+            string.  As and when a value is written into an instance of
+            ifAlias through a network management set operation, then the
+            agent must retain the supplied value in the ifAlias instance
+            associated with the same interface for as long as that
+            interface remains instantiated, including across all re-
+            initializations/reboots of the network management system,
+            including those which result in a change of the interface's
+            ifIndex value.
+
+            An example of the value which a network manager might store
+            in this object for a WAN interface is the (Telco's) circuit
+            number/identifier of the interface.
+
+            Some agents may support write-access only for interfaces
+            having particular values of ifType.  An agent which supports
+            write access to this object is required to keep the value in
+            non-volatile storage, but it may limit the length of new
+            values depending on how much storage is already occupied by
+            the current values for other interfaces."
+    ::= { ifXEntry 18 }
+
+ifCounterDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime on the most recent occasion at which
+            any one or more of this interface's counters suffered a
+            discontinuity.  The relevant counters are the specific
+            instances associated with this interface of any Counter32 or
+
+            Counter64 object contained in the ifTable or ifXTable.  If
+            no such discontinuities have occurred since the last re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ifXEntry 19 }
+
+--           The Interface Stack Group
+--
+-- Implementation of this group is optional, but strongly recommended
+-- for all systems
+--
+
+ifStackTable  OBJECT-TYPE
+     SYNTAX        SEQUENCE OF IfStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The table containing information on the relationships
+            between the multiple sub-layers of network interfaces.  In
+            particular, it contains information on which sub-layers run
+            'on top of' which other sub-layers, where each sub-layer
+            corresponds to a conceptual row in the ifTable.  For
+            example, when the sub-layer with ifIndex value x runs over
+            the sub-layer with ifIndex value y, then this table
+            contains:
+
+              ifStackStatus.x.y=active
+
+            For each ifIndex value, I, which identifies an active
+            interface, there are always at least two instantiated rows
+            in this table associated with I.  For one of these rows, I
+            is the value of ifStackHigherLayer; for the other, I is the
+            value of ifStackLowerLayer.  (If I is not involved in
+            multiplexing, then these are the only two rows associated
+            with I.)
+
+            For example, two rows exist even for an interface which has
+            no others stacked on top or below it:
+
+              ifStackStatus.0.x=active
+              ifStackStatus.x.0=active "
+     ::= { ifMIBObjects 2 }
+
+ifStackEntry  OBJECT-TYPE
+     SYNTAX        IfStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "Information on a particular relationship between two sub-
+            layers, specifying that one sub-layer runs on 'top' of the
+            other sub-layer.  Each sub-layer corresponds to a conceptual
+            row in the ifTable."
+     INDEX { ifStackHigherLayer, ifStackLowerLayer }
+     ::= { ifStackTable 1 }
+
+IfStackEntry ::=
+    SEQUENCE {
+        ifStackHigherLayer  InterfaceIndexOrZero,
+        ifStackLowerLayer   InterfaceIndexOrZero,
+        ifStackStatus       RowStatus
+     }
+
+ifStackHigherLayer  OBJECT-TYPE
+     SYNTAX        InterfaceIndexOrZero
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The value of ifIndex corresponding to the higher sub-layer
+            of the relationship, i.e., the sub-layer which runs on 'top'
+            of the sub-layer identified by the corresponding instance of
+            ifStackLowerLayer.  If there is no higher sub-layer (below
+            the internetwork layer), then this object has the value 0."
+     ::= { ifStackEntry 1 }
+
+ifStackLowerLayer  OBJECT-TYPE
+     SYNTAX        InterfaceIndexOrZero
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The value of ifIndex corresponding to the lower sub-layer
+            of the relationship, i.e., the sub-layer which runs 'below'
+            the sub-layer identified by the corresponding instance of
+            ifStackHigherLayer.  If there is no lower sub-layer, then
+            this object has the value 0."
+     ::= { ifStackEntry 2 }
+
+ifStackStatus  OBJECT-TYPE
+    SYNTAX         RowStatus
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+            "The status of the relationship between two sub-layers.
+
+            Changing the value of this object from 'active' to
+            'notInService' or 'destroy' will likely have consequences up
+            and down the interface stack.  Thus, write access to this
+            object is likely to be inappropriate for some types of
+            interfaces, and many implementations will choose not to
+            support write-access for any type of interface."
+    ::= { ifStackEntry 3 }
+
+ifStackLastChange OBJECT-TYPE
+    SYNTAX         TimeTicks
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the last change of
+            the (whole) interface stack.  A change of the interface
+            stack is defined to be any creation, deletion, or change in
+            value of any instance of ifStackStatus.  If the interface
+            stack has been unchanged since the last re-initialization of
+            the local network management subsystem, then this object
+            contains a zero value."
+    ::= { ifMIBObjects 6 }
+
+--   Generic Receive Address Table
+--
+-- This group of objects is mandatory for all types of
+-- interfaces which can receive packets/frames addressed to
+-- more than one address.
+--
+-- This table replaces the ifExtnsRcvAddr table.  The main
+-- difference is that this table makes use of the RowStatus
+-- textual convention, while ifExtnsRcvAddr did not.
+
+ifRcvAddressTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfRcvAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains an entry for each address (broadcast,
+            multicast, or uni-cast) for which the system will receive
+            packets/frames on a particular interface, except as follows:
+
+            - for an interface operating in promiscuous mode, entries
+            are only required for those addresses for which the system
+            would receive frames were it not operating in promiscuous
+            mode.
+
+            - for 802.5 functional addresses, only one entry is
+            required, for the address which has the functional address
+            bit ANDed with the bit mask of all functional addresses for
+            which the interface will accept frames.
+
+            A system is normally able to use any unicast address which
+            corresponds to an entry in this table as a source address."
+    ::= { ifMIBObjects 4 }
+
+ifRcvAddressEntry  OBJECT-TYPE
+    SYNTAX      IfRcvAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of objects identifying an address for which the
+            system will accept packets/frames on the particular
+            interface identified by the index value ifIndex."
+    INDEX  { ifIndex, ifRcvAddressAddress }
+    ::= { ifRcvAddressTable 1 }
+
+IfRcvAddressEntry ::=
+    SEQUENCE {
+        ifRcvAddressAddress   PhysAddress,
+        ifRcvAddressStatus    RowStatus,
+        ifRcvAddressType      INTEGER
+    }
+
+ifRcvAddressAddress OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An address for which the system will accept packets/frames
+            on this entry's interface."
+    ::= { ifRcvAddressEntry 1 }
+
+ifRcvAddressStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object is used to create and delete rows in the
+            ifRcvAddressTable."
+    ::= { ifRcvAddressEntry 2 }
+
+ifRcvAddressType OBJECT-TYPE
+    SYNTAX      INTEGER {
+
+                    other(1),
+                    volatile(2),
+                    nonVolatile(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object has the value nonVolatile(3) for those entries
+            in the table which are valid and will not be deleted by the
+            next restart of the managed system.  Entries having the
+            value volatile(2) are valid and exist, but have not been
+            saved, so that will not exist after the next restart of the
+            managed system.  Entries having the value other(1) are valid
+            and exist but are not classified as to whether they will
+            continue to exist after the next restart."
+    DEFVAL  { volatile }
+    ::= { ifRcvAddressEntry 3 }
+
+-- definition of interface-related traps.
+
+linkDown NOTIFICATION-TYPE
+    OBJECTS { ifIndex, ifAdminStatus, ifOperStatus }
+    STATUS  current
+    DESCRIPTION
+            "A linkDown trap signifies that the SNMP entity, acting in
+            an agent role, has detected that the ifOperStatus object for
+            one of its communication links is about to enter the down
+            state from some other state (but not from the notPresent
+            state).  This other state is indicated by the included value
+            of ifOperStatus."
+    ::= { snmpTraps 3 }
+
+linkUp NOTIFICATION-TYPE
+    OBJECTS { ifIndex, ifAdminStatus, ifOperStatus }
+    STATUS  current
+    DESCRIPTION
+            "A linkUp trap signifies that the SNMP entity, acting in an
+            agent role, has detected that the ifOperStatus object for
+            one of its communication links left the down state and
+            transitioned into some other state (but not into the
+            notPresent state).  This other state is indicated by the
+            included value of ifOperStatus."
+    ::= { snmpTraps 4 }
+
+-- conformance information
+
+ifConformance OBJECT IDENTIFIER ::= { ifMIB 2 }
+
+ifGroups      OBJECT IDENTIFIER ::= { ifConformance 1 }
+ifCompliances OBJECT IDENTIFIER ::= { ifConformance 2 }
+
+-- compliance statements
+
+ifCompliance3 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which have
+            network interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralInformationGroup,
+                           linkUpDownNotificationsGroup }
+
+-- The groups:
+--        ifFixedLengthGroup
+--        ifHCFixedLengthGroup
+--        ifPacketGroup
+--        ifHCPacketGroup
+--        ifVHCPacketGroup
+-- are mutually exclusive; at most one of these groups is implemented
+-- for a particular interface.  When any of these groups is implemented
+-- for a particular interface, then ifCounterDiscontinuityGroup must
+-- also be implemented for that interface.
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units, and for which the value of the
+            corresponding instance of ifSpeed is less than or equal to
+            20,000,000 bits/second."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are packet-oriented, and for which the value of the
+            corresponding instance of ifSpeed is less than or equal to
+            20,000,000 bits/second."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second but less than or equal to 650,000,000
+            bits/second."
+
+        GROUP       ifVHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifCounterDiscontinuityGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces that
+            are required to maintain counters (i.e., those for which one
+            of the ifFixedLengthGroup, ifHCFixedLengthGroup,
+            ifPacketGroup, ifHCPacketGroup, or ifVHCPacketGroup is
+            mandatory)."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+
+        OBJECT       ifAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { ifCompliances 3 }
+
+-- units of conformance
+
+ifGeneralInformationGroup    OBJECT-GROUP
+    OBJECTS { ifIndex, ifDescr, ifType, ifSpeed, ifPhysAddress,
+              ifAdminStatus, ifOperStatus, ifLastChange,
+              ifLinkUpDownTrapEnable, ifConnectorPresent,
+              ifHighSpeed, ifName, ifNumber, ifAlias,
+              ifTableLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information applicable to
+            all network interfaces."
+    ::= { ifGroups 10 }
+
+-- the following five groups are mutually exclusive; at most
+-- one of these groups is implemented for any interface
+
+ifFixedLengthGroup    OBJECT-GROUP
+    OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            non-high speed (non-high speed interfaces transmit and
+            receive at speeds less than or equal to 20,000,000
+            bits/second) character-oriented or fixed-length-transmission
+            network interfaces."
+    ::= { ifGroups 2 }
+
+ifHCFixedLengthGroup    OBJECT-GROUP
+    OBJECTS { ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second) character-
+            oriented or fixed-length-transmission network interfaces."
+    ::= { ifGroups 3 }
+
+ifPacketGroup    OBJECT-GROUP
+    OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            non-high speed (non-high speed interfaces transmit and
+            receive at speeds less than or equal to 20,000,000
+            bits/second) packet-oriented network interfaces."
+    ::= { ifGroups 4 }
+
+ifHCPacketGroup    OBJECT-GROUP
+    OBJECTS { ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second but less
+            than or equal to 650,000,000 bits/second) packet-oriented
+            network interfaces."
+    ::= { ifGroups 5 }
+
+ifVHCPacketGroup    OBJECT-GROUP
+    OBJECTS { ifHCInUcastPkts, ifHCInMulticastPkts,
+              ifHCInBroadcastPkts, ifHCOutUcastPkts,
+              ifHCOutMulticastPkts, ifHCOutBroadcastPkts,
+              ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            higher speed (greater than 650,000,000 bits/second) packet-
+            oriented network interfaces."
+    ::= { ifGroups 6 }
+
+ifRcvAddressGroup    OBJECT-GROUP
+    OBJECTS { ifRcvAddressStatus, ifRcvAddressType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            multiple addresses which an interface receives."
+    ::= { ifGroups 7 }
+
+ifStackGroup2    OBJECT-GROUP
+    OBJECTS { ifStackStatus, ifStackLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            layering of MIB-II interfaces."
+    ::= { ifGroups 11 }
+
+ifCounterDiscontinuityGroup  OBJECT-GROUP
+    OBJECTS { ifCounterDiscontinuityTime }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            interface counter discontinuities."
+    ::= { ifGroups 13 }
+
+linkUpDownNotificationsGroup  NOTIFICATION-GROUP
+    NOTIFICATIONS { linkUp, linkDown }
+    STATUS  current
+    DESCRIPTION
+            "The notifications which indicate specific changes in the
+            value of ifOperStatus."
+    ::= { ifGroups 14 }
+
+-- Deprecated Definitions - Objects
+
+--
+--    The Interface Test Table
+--
+-- This group of objects is optional.  However, a media-specific
+
+-- MIB may make implementation of this group mandatory.
+--
+-- This table replaces the ifExtnsTestTable
+--
+
+ifTestTable   OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      deprecated
+    DESCRIPTION
+            "This table contains one entry per interface.  It defines
+            objects which allow a network manager to instruct an agent
+            to test an interface for various faults.  Tests for an
+            interface are defined in the media-specific MIB for that
+            interface.  After invoking a test, the object ifTestResult
+            can be read to determine the outcome.  If an agent can not
+            perform the test, ifTestResult is set to so indicate.  The
+            object ifTestCode can be used to provide further test-
+            specific or interface-specific (or even enterprise-specific)
+            information concerning the outcome of the test.  Only one
+            test can be in progress on each interface at any one time.
+            If one test is in progress when another test is invoked, the
+            second test is rejected.  Some agents may reject a test when
+            a prior test is active on another interface.
+
+            Before starting a test, a manager-station must first obtain
+            'ownership' of the entry in the ifTestTable for the
+            interface to be tested.  This is accomplished with the
+            ifTestId and ifTestStatus objects as follows:
+
+          try_again:
+              get (ifTestId, ifTestStatus)
+              while (ifTestStatus != notInUse)
+                  /*
+                   * Loop while a test is running or some other
+                   * manager is configuring a test.
+                   */
+                  short delay
+                  get (ifTestId, ifTestStatus)
+              }
+
+              /*
+               * Is not being used right now -- let's compete
+               * to see who gets it.
+               */
+              lock_value = ifTestId
+
+              if ( set(ifTestId = lock_value, ifTestStatus = inUse,
+                       ifTestOwner = 'my-IP-address') == FAILURE)
+                  /*
+                   * Another manager got the ifTestEntry -- go
+                   * try again
+                   */
+                  goto try_again;
+
+              /*
+               * I have the lock
+               */
+              set up any test parameters.
+
+              /*
+               * This starts the test
+               */
+              set(ifTestType = test_to_run);
+
+              wait for test completion by polling ifTestResult
+
+              when test completes, agent sets ifTestResult
+                   agent also sets ifTestStatus = 'notInUse'
+
+              retrieve any additional test results, and ifTestId
+
+              if (ifTestId == lock_value+1) results are valid
+
+            A manager station first retrieves the value of the
+            appropriate ifTestId and ifTestStatus objects, periodically
+            repeating the retrieval if necessary, until the value of
+            ifTestStatus is 'notInUse'.  The manager station then tries
+            to set the same ifTestId object to the value it just
+            retrieved, the same ifTestStatus object to 'inUse', and the
+            corresponding ifTestOwner object to a value indicating
+            itself.  If the set operation succeeds then the manager has
+            obtained ownership of the ifTestEntry, and the value of the
+            ifTestId object is incremented by the agent (per the
+            semantics of TestAndIncr).  Failure of the set operation
+            indicates that some other manager has obtained ownership of
+            the ifTestEntry.
+
+            Once ownership is obtained, any test parameters can be
+            setup, and then the test is initiated by setting ifTestType.
+            On completion of the test, the agent sets ifTestStatus to
+            'notInUse'.  Once this occurs, the manager can retrieve the
+            results.  In the (rare) event that the invocation of tests
+            by two network managers were to overlap, then there would be
+            a possibility that the first test's results might be
+            overwritten by the second test's results prior to the first
+
+            results being read.  This unlikely circumstance can be
+            detected by a network manager retrieving ifTestId at the
+            same time as retrieving the test results, and ensuring that
+            the results are for the desired request.
+
+            If ifTestType is not set within an abnormally long period of
+            time after ownership is obtained, the agent should time-out
+            the manager, and reset the value of the ifTestStatus object
+            back to 'notInUse'.  It is suggested that this time-out
+            period be 5 minutes.
+
+            In general, a management station must not retransmit a
+            request to invoke a test for which it does not receive a
+            response; instead, it properly inspects an agent's MIB to
+            determine if the invocation was successful.  Only if the
+            invocation was unsuccessful, is the invocation request
+            retransmitted.
+
+            Some tests may require the interface to be taken off-line in
+            order to execute them, or may even require the agent to
+            reboot after completion of the test.  In these
+            circumstances, communication with the management station
+            invoking the test may be lost until after completion of the
+            test.  An agent is not required to support such tests.
+            However, if such tests are supported, then the agent should
+            make every effort to transmit a response to the request
+            which invoked the test prior to losing communication.  When
+            the agent is restored to normal service, the results of the
+            test are properly made available in the appropriate objects.
+            Note that this requires that the ifIndex value assigned to
+            an interface must be unchanged even if the test causes a
+            reboot.  An agent must reject any test for which it cannot,
+            perhaps due to resource constraints, make available at least
+            the minimum amount of information after that test
+            completes."
+    ::= { ifMIBObjects 3 }
+
+ifTestEntry OBJECT-TYPE
+    SYNTAX       IfTestEntry
+    MAX-ACCESS   not-accessible
+    STATUS       deprecated
+    DESCRIPTION
+            "An entry containing objects for invoking tests on an
+            interface."
+    AUGMENTS  { ifEntry }
+    ::= { ifTestTable 1 }
+
+IfTestEntry ::=
+
+    SEQUENCE {
+        ifTestId           TestAndIncr,
+        ifTestStatus       INTEGER,
+        ifTestType         AutonomousType,
+        ifTestResult       INTEGER,
+        ifTestCode         OBJECT IDENTIFIER,
+        ifTestOwner        OwnerString
+    }
+
+ifTestId         OBJECT-TYPE
+    SYNTAX       TestAndIncr
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "This object identifies the current invocation of the
+            interface's test."
+    ::= { ifTestEntry 1 }
+
+ifTestStatus     OBJECT-TYPE
+    SYNTAX       INTEGER { notInUse(1), inUse(2) }
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "This object indicates whether or not some manager currently
+            has the necessary 'ownership' required to invoke a test on
+            this interface.  A write to this object is only successful
+            when it changes its value from 'notInUse(1)' to 'inUse(2)'.
+            After completion of a test, the agent resets the value back
+            to 'notInUse(1)'."
+    ::= { ifTestEntry 2 }
+
+ifTestType       OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "A control variable used to start and stop operator-
+            initiated interface tests.  Most OBJECT IDENTIFIER values
+            assigned to tests are defined elsewhere, in association with
+            specific types of interface.  However, this document assigns
+            a value for a full-duplex loopback test, and defines the
+            special meanings of the subject identifier:
+
+                noTest  OBJECT IDENTIFIER ::= { 0 0 }
+
+            When the value noTest is written to this object, no action
+            is taken unless a test is in progress, in which case the
+            test is aborted.  Writing any other value to this object is
+
+            only valid when no test is currently in progress, in which
+            case the indicated test is initiated.
+
+            When read, this object always returns the most recent value
+            that ifTestType was set to.  If it has not been set since
+            the last initialization of the network management subsystem
+            on the agent, a value of noTest is returned."
+    ::= { ifTestEntry 3 }
+
+ifTestResult  OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     none(1),          -- no test yet requested
+                     success(2),
+                     inProgress(3),
+                     notSupported(4),
+                     unAbleToRun(5),   -- due to state of system
+                     aborted(6),
+                     failed(7)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       deprecated
+    DESCRIPTION
+            "This object contains the result of the most recently
+            requested test, or the value none(1) if no tests have been
+            requested since the last reset.  Note that this facility
+            provides no provision for saving the results of one test
+            when starting another, as could be required if used by
+            multiple managers concurrently."
+    ::= { ifTestEntry 4 }
+
+ifTestCode  OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   read-only
+    STATUS       deprecated
+    DESCRIPTION
+            "This object contains a code which contains more specific
+            information on the test result, for example an error-code
+            after a failed test.  Error codes and other values this
+            object may take are specific to the type of interface and/or
+            test.  The value may have the semantics of either the
+            AutonomousType or InstancePointer textual conventions as
+            defined in RFC 2579.  The identifier:
+
+                testCodeUnknown  OBJECT IDENTIFIER ::= { 0 0 }
+
+            is defined for use if no additional result code is
+            available."
+    ::= { ifTestEntry 5 }
+
+ifTestOwner      OBJECT-TYPE
+    SYNTAX       OwnerString
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "The entity which currently has the 'ownership' required to
+            invoke a test on this interface."
+    ::= { ifTestEntry 6 }
+
+-- Deprecated Definitions - Groups
+
+ifGeneralGroup    OBJECT-GROUP
+    OBJECTS { ifDescr, ifType, ifSpeed, ifPhysAddress,
+              ifAdminStatus, ifOperStatus, ifLastChange,
+              ifLinkUpDownTrapEnable, ifConnectorPresent,
+              ifHighSpeed, ifName }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects deprecated in favour of
+            ifGeneralInformationGroup."
+    ::= { ifGroups 1 }
+
+ifTestGroup    OBJECT-GROUP
+    OBJECTS { ifTestId, ifTestStatus, ifTestType,
+              ifTestResult, ifTestCode, ifTestOwner }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing the ability to invoke
+            tests on an interface."
+    ::= { ifGroups 8 }
+
+ifStackGroup    OBJECT-GROUP
+    OBJECTS { ifStackStatus }
+    STATUS  deprecated
+    DESCRIPTION
+            "The previous collection of objects providing information on
+            the layering of MIB-II interfaces."
+    ::= { ifGroups 9 }
+
+ifOldObjectsGroup    OBJECT-GROUP
+    OBJECTS { ifInNUcastPkts, ifOutNUcastPkts,
+              ifOutQLen, ifSpecific }
+    STATUS  deprecated
+    DESCRIPTION
+            "The collection of objects deprecated from the original MIB-
+            II interfaces group."
+    ::= { ifGroups 12 }
+
+-- Deprecated Definitions - Compliance
+
+ifCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "A compliance statement defined in a previous version of
+            this MIB module, for SNMP entities which have network
+            interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralGroup, ifStackGroup }
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are character-oriented or transmit data in fixed-
+            length transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are packet-oriented."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifTestGroup
+        DESCRIPTION
+            "This group is optional.  Media-specific MIBs which require
+            interface tests are strongly encouraged to use this group
+            for invoking tests and reporting results.  A medium specific
+            MIB which has mandatory tests may make implementation of
+
+            this group mandatory."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifStackStatus
+        SYNTAX      INTEGER { active(1) } -- subset of RowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and only one of the six
+            enumerated values for the RowStatus textual convention need
+            be supported, specifically: active(1)."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+    ::= { ifCompliances 1 }
+
+ifCompliance2 MODULE-COMPLIANCE
+    STATUS      deprecated
+    DESCRIPTION
+            "A compliance statement defined in a previous version of
+            this MIB module, for SNMP entities which have network
+            interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralInformationGroup, ifStackGroup2,
+                           ifCounterDiscontinuityGroup }
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are character-oriented or transmit data in fixed-
+            length transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are packet-oriented."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifStackStatus
+        SYNTAX      INTEGER { active(1) } -- subset of RowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and only one of the six
+            enumerated values for the RowStatus textual convention need
+            be supported, specifically: active(1)."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+
+        OBJECT       ifAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { ifCompliances 2 }
+
+END
diff --git a/share/snmp/INET-ADDRESS-MIB.txt b/share/snmp/INET-ADDRESS-MIB.txt
new file mode 100644
index 00000000000..a778cba6b74
--- /dev/null
+++ b/share/snmp/INET-ADDRESS-MIB.txt
@@ -0,0 +1,402 @@
+INET-ADDRESS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, mib-2, Unsigned32 FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                 FROM SNMPv2-TC;
+
+inetAddressMIB MODULE-IDENTITY
+    LAST-UPDATED "200502040000Z"
+    ORGANIZATION
+        "IETF Operations and Management Area"
+    CONTACT-INFO
+        "Juergen Schoenwaelder (Editor)
+         International University Bremen
+         P.O. Box 750 561
+         28725 Bremen, Germany
+
+         Phone: +49 421 200-3587
+         EMail: j.schoenwaelder@iu-bremen.de
+
+         Send comments to <ietfmibs@ops.ietf.org>."
+    DESCRIPTION
+        "This MIB module defines textual conventions for
+         representing Internet addresses.  An Internet
+         address can be an IPv4 address, an IPv6 address,
+         or a DNS domain name.  This module also defines
+         textual conventions for Internet port numbers,
+         autonomous system numbers, and the length of an
+         Internet address prefix.
+
+         Copyright (C) The Internet Society (2005).  This version
+         of this MIB module is part of RFC 4001, see the RFC
+         itself for full legal notices."
+    REVISION     "200502040000Z"
+    DESCRIPTION
+        "Third version, published as RFC 4001.  This revision
+         introduces the InetZoneIndex, InetScopeType, and
+         InetVersion textual conventions."
+    REVISION     "200205090000Z"
+    DESCRIPTION
+        "Second version, published as RFC 3291.  This
+         revision contains several clarifications and
+         introduces several new textual conventions:
+         InetAddressPrefixLength, InetPortNumber,
+         InetAutonomousSystemNumber, InetAddressIPv4z,
+         and InetAddressIPv6z."
+    REVISION     "200006080000Z"
+    DESCRIPTION
+        "Initial version, published as RFC 2851."
+    ::= { mib-2 76 }
+
+InetAddressType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value that represents a type of Internet address.
+
+         unknown(0)  An unknown address type.  This value MUST
+                     be used if the value of the corresponding
+                     InetAddress object is a zero-length string.
+                     It may also be used to indicate an IP address
+                     that is not in one of the formats defined
+                     below.
+
+         ipv4(1)     An IPv4 address as defined by the
+                     InetAddressIPv4 textual convention.
+
+         ipv6(2)     An IPv6 address as defined by the
+                     InetAddressIPv6 textual convention.
+
+         ipv4z(3)    A non-global IPv4 address including a zone
+                     index as defined by the InetAddressIPv4z
+                     textual convention.
+
+         ipv6z(4)    A non-global IPv6 address including a zone
+                     index as defined by the InetAddressIPv6z
+                     textual convention.
+
+         dns(16)     A DNS domain name as defined by the
+                     InetAddressDNS textual convention.
+
+         Each definition of a concrete InetAddressType value must be
+         accompanied by a definition of a textual convention for use
+         with that InetAddressType.
+
+         To support future extensions, the InetAddressType textual
+         convention SHOULD NOT be sub-typed in object type definitions.
+         It MAY be sub-typed in compliance statements in order to
+         require only a subset of these address types for a compliant
+         implementation.
+
+         Implementations must ensure that InetAddressType objects
+         and any dependent objects (e.g., InetAddress objects) are
+         consistent.  An inconsistentValue error must be generated
+         if an attempt to change an InetAddressType object would,
+         for example, lead to an undefined InetAddress value.  In
+
+         particular, InetAddressType/InetAddress pairs must be
+         changed together if the address type changes (e.g., from
+         ipv6(2) to ipv4(1))."
+    SYNTAX       INTEGER {
+                     unknown(0),
+                     ipv4(1),
+                     ipv6(2),
+                     ipv4z(3),
+                     ipv6z(4),
+                     dns(16)
+                 }
+
+InetAddress ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Denotes a generic Internet address.
+
+         An InetAddress value is always interpreted within the context
+         of an InetAddressType value.  Every usage of the InetAddress
+         textual convention is required to specify the InetAddressType
+         object that provides the context.  It is suggested that the
+         InetAddressType object be logically registered before the
+         object(s) that use the InetAddress textual convention, if
+         they appear in the same logical row.
+
+         The value of an InetAddress object must always be
+         consistent with the value of the associated InetAddressType
+         object.  Attempts to set an InetAddress object to a value
+         inconsistent with the associated InetAddressType
+         must fail with an inconsistentValue error.
+
+         When this textual convention is used as the syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58.  In this case,
+         the object definition MUST include a 'SIZE' clause to
+         limit the number of potential instance sub-identifiers;
+         otherwise the applicable constraints MUST be stated in
+         the appropriate conceptual row DESCRIPTION clauses, or
+         in the surrounding documentation if there is no single
+         DESCRIPTION clause that is appropriate."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+InetAddressIPv4 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d"
+    STATUS       current
+    DESCRIPTION
+        "Represents an IPv4 network address:
+
+           Octets   Contents         Encoding
+            1-4     IPv4 address     network-byte order
+
+         The corresponding InetAddressType value is ipv4(1).
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (4))
+
+InetAddressIPv6 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
+    STATUS       current
+    DESCRIPTION
+        "Represents an IPv6 network address:
+
+           Octets   Contents         Encoding
+            1-16    IPv6 address     network-byte order
+
+         The corresponding InetAddressType value is ipv6(2).
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (16))
+
+InetAddressIPv4z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d%4d"
+    STATUS       current
+    DESCRIPTION
+        "Represents a non-global IPv4 network address, together
+         with its zone index:
+
+           Octets   Contents         Encoding
+            1-4     IPv4 address     network-byte order
+            5-8     zone index       network-byte order
+
+         The corresponding InetAddressType value is ipv4z(3).
+
+         The zone index (bytes 5-8) is used to disambiguate identical
+         address values on nodes that have interfaces attached to
+         different zones of the same scope.  The zone index may contain
+         the special value 0, which refers to the default zone for each
+         scope.
+
+         This textual convention SHOULD NOT be used directly in object
+
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (8))
+
+InetAddressIPv6z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x%4d"
+    STATUS       current
+    DESCRIPTION
+        "Represents a non-global IPv6 network address, together
+         with its zone index:
+
+           Octets   Contents         Encoding
+            1-16    IPv6 address     network-byte order
+           17-20    zone index       network-byte order
+
+         The corresponding InetAddressType value is ipv6z(4).
+
+         The zone index (bytes 17-20) is used to disambiguate
+         identical address values on nodes that have interfaces
+         attached to different zones of the same scope.  The zone index
+         may contain the special value 0, which refers to the default
+         zone for each scope.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (20))
+
+InetAddressDNS ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       current
+    DESCRIPTION
+        "Represents a DNS domain name.  The name SHOULD be fully
+         qualified whenever possible.
+
+         The corresponding InetAddressType is dns(16).
+
+         The DESCRIPTION clause of InetAddress objects that may have
+         InetAddressDNS values MUST fully describe how (and when)
+         these names are to be resolved to IP addresses.
+
+         The resolution of an InetAddressDNS value may require to
+         query multiple DNS records (e.g., A for IPv4 and AAAA for
+         IPv6).  The order of the resolution process and which DNS
+         record takes precedence depends on the configuration of the
+         resolver.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions, as it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or in
+         conjunction with InetAddressType, as a pair."
+    SYNTAX       OCTET STRING (SIZE (1..255))
+
+InetAddressPrefixLength ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "Denotes the length of a generic Internet network address
+         prefix.  A value of n corresponds to an IP address mask
+         that has n contiguous 1-bits from the most significant
+         bit (MSB), with all other bits set to 0.
+
+         An InetAddressPrefixLength value is always interpreted within
+         the context of an InetAddressType value.  Every usage of the
+         InetAddressPrefixLength textual convention is required to
+         specify the InetAddressType object that provides the
+         context.  It is suggested that the InetAddressType object be
+         logically registered before the object(s) that use the
+         InetAddressPrefixLength textual convention, if they appear
+         in the same logical row.
+
+         InetAddressPrefixLength values larger than
+         the maximum length of an IP address for a specific
+         InetAddressType are treated as the maximum significant
+         value applicable for the InetAddressType.  The maximum
+         significant value is 32 for the InetAddressType
+         'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType
+         'ipv6(2)' and 'ipv6z(4)'.  The maximum significant value
+         for the InetAddressType 'dns(16)' is 0.
+
+         The value zero is object-specific and must be defined as
+         part of the description of any object that uses this
+         syntax.  Examples of the usage of zero might include
+         situations where the Internet network address prefix
+         is unknown or does not apply.
+
+         The upper bound of the prefix length has been chosen to
+         be consistent with the maximum size of an InetAddress."
+    SYNTAX       Unsigned32 (0..2040)
+
+InetPortNumber ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "Represents a 16 bit port number of an Internet transport
+
+         layer protocol.  Port numbers are assigned by IANA.  A
+         current list of all assignments is available from
+         <http://www.iana.org/>.
+
+         The value zero is object-specific and must be defined as
+         part of the description of any object that uses this
+         syntax.  Examples of the usage of zero might include
+         situations where a port number is unknown, or when the
+         value zero is used as a wildcard in a filter."
+    REFERENCE   "STD 6 (RFC 768), STD 7 (RFC 793) and RFC 2960"
+    SYNTAX       Unsigned32 (0..65535)
+
+InetAutonomousSystemNumber ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "Represents an autonomous system number that identifies an
+         Autonomous System (AS).  An AS is a set of routers under a
+         single technical administration, using an interior gateway
+         protocol and common metrics to route packets within the AS,
+         and using an exterior gateway protocol to route packets to
+         other ASes'.  IANA maintains the AS number space and has
+         delegated large parts to the regional registries.
+
+         Autonomous system numbers are currently limited to 16 bits
+         (0..65535).  There is, however, work in progress to enlarge the
+         autonomous system number space to 32 bits.  Therefore, this
+         textual convention uses an Unsigned32 value without a
+         range restriction in order to support a larger autonomous
+         system number space."
+    REFERENCE   "RFC 1771, RFC 1930"
+    SYNTAX       Unsigned32
+
+InetScopeType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "Represents a scope type.  This textual convention can be used
+         in cases where a MIB has to represent different scope types
+         and there is no context information, such as an InetAddress
+         object, that implicitly defines the scope type.
+
+         Note that not all possible values have been assigned yet, but
+         they may be assigned in future revisions of this specification.
+         Applications should therefore be able to deal with values
+         not yet assigned."
+    REFERENCE   "RFC 3513"
+    SYNTAX       INTEGER {
+                     -- reserved(0),
+                     interfaceLocal(1),
+                     linkLocal(2),
+                     subnetLocal(3),
+                     adminLocal(4),
+                     siteLocal(5), -- site-local unicast addresses
+                                   -- have been deprecated by RFC 3879
+                     -- unassigned(6),
+                     -- unassigned(7),
+                     organizationLocal(8),
+                     -- unassigned(9),
+                     -- unassigned(10),
+                     -- unassigned(11),
+                     -- unassigned(12),
+                     -- unassigned(13),
+                     global(14)
+                     -- reserved(15)
+                 }
+
+InetZoneIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+        "A zone index identifies an instance of a zone of a
+         specific scope.
+
+         The zone index MUST disambiguate identical address
+         values.  For link-local addresses, the zone index will
+         typically be the interface index (ifIndex as defined in the
+         IF-MIB) of the interface on which the address is configured.
+
+         The zone index may contain the special value 0, which refers
+         to the default zone.  The default zone may be used in cases
+         where the valid zone index is not known (e.g., when a
+         management application has to write a link-local IPv6
+         address without knowing the interface index value).  The
+         default zone SHOULD NOT be used as an easy way out in
+         cases where the zone index for a non-global IPv6 address
+         is known."
+    REFERENCE   "RFC4007"
+    SYNTAX       Unsigned32
+
+InetVersion ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A value representing a version of the IP protocol.
+
+         unknown(0)  An unknown or unspecified version of the IP
+                     protocol.
+
+         ipv4(1)     The IPv4 protocol as defined in RFC 791 (STD 5).
+
+         ipv6(2)     The IPv6 protocol as defined in RFC 2460.
+
+         Note that this textual convention SHOULD NOT be used to
+         distinguish different address types associated with IP
+         protocols.  The InetAddressType has been designed for this
+         purpose."
+    REFERENCE   "RFC 791, RFC 2460"
+    SYNTAX       INTEGER {
+                     unknown(0),
+                     ipv4(1),
+                     ipv6(2)
+                 }
+END
diff --git a/share/snmp/IP-FORWARD-MIB.txt b/share/snmp/IP-FORWARD-MIB.txt
new file mode 100644
index 00000000000..347b5e004e3
--- /dev/null
+++ b/share/snmp/IP-FORWARD-MIB.txt
@@ -0,0 +1,1277 @@
+IP-FORWARD-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    IpAddress, Integer32, Gauge32,
+    Counter32                          FROM SNMPv2-SMI
+    RowStatus                          FROM SNMPv2-TC
+
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
+    InterfaceIndexOrZero               FROM IF-MIB
+    ip                                 FROM IP-MIB
+    IANAipRouteProtocol                FROM IANA-RTPROTO-MIB
+    InetAddress, InetAddressType,
+    InetAddressPrefixLength,
+    InetAutonomousSystemNumber         FROM INET-ADDRESS-MIB;
+
+ipForward MODULE-IDENTITY
+    LAST-UPDATED "200602010000Z"
+    ORGANIZATION
+           "IETF IPv6 Working Group
+            http://www.ietf.org/html.charters/ipv6-charter.html"
+    CONTACT-INFO
+           "Editor:
+            Brian Haberman
+            Johns Hopkins University - Applied Physics Laboratory
+            Mailstop 17-S442
+            11100 Johns Hopkins Road
+            Laurel MD,  20723-6099  USA
+
+            Phone: +1-443-778-1319
+            Email: brian@innovationslab.net
+
+            Send comments to <ipv6@ietf.org>"
+    DESCRIPTION
+           "The MIB module for the management of CIDR multipath IP
+            Routes.
+
+            Copyright (C) The Internet Society (2006).  This version
+            of this MIB module is a part of RFC 4292; see the RFC
+            itself for full legal notices."
+
+    REVISION      "200602010000Z"
+    DESCRIPTION
+           "IPv4/v6 version-independent revision.  Minimal changes
+            were made to the original RFC 2096 MIB to allow easy
+            upgrade of existing IPv4 implementations to the
+            version-independent MIB.  These changes include:
+
+            Adding inetCidrRouteDiscards as a replacement for the
+            deprecated ipRoutingDiscards and ipv6DiscardedRoutes
+            objects.
+
+            Adding a new conformance statement to support the
+            implementation of the IP Forwarding MIB in a
+            read-only mode.
+
+            The inetCidrRouteTable replaces the IPv4-specific
+            ipCidrRouteTable, its related objects, and related
+            conformance statements.
+
+            Published as RFC 4292."
+
+    REVISION      "199609190000Z"
+    DESCRIPTION
+           "Revised to support CIDR routes.
+            Published as RFC 2096."
+
+    REVISION      "199207022156Z"
+    DESCRIPTION
+           "Initial version, published as RFC 1354."
+    ::= { ip 24 }
+
+inetCidrRouteNumber OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of current inetCidrRouteTable entries that
+            are not invalid."
+::= { ipForward 6 }
+
+inetCidrRouteDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of valid route entries discarded from the
+            inetCidrRouteTable.  Discarded route entries do not
+            appear in the inetCidrRouteTable.  One possible reason
+            for discarding an entry would be to free-up buffer space
+            for other route table entries."
+    ::= { ipForward 8 }
+
+--  Inet CIDR Route Table
+
+--  The Inet CIDR Route Table deprecates and replaces the
+--  ipCidrRoute Table currently in the IP Forwarding Table MIB.
+--  It adds IP protocol independence.
+
+inetCidrRouteTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF InetCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This entity's IP Routing table."
+    REFERENCE
+           "RFC 1213 Section 6.6, The IP Group"
+    ::= { ipForward 7 }
+
+inetCidrRouteEntry OBJECT-TYPE
+    SYNTAX     InetCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A particular route to a particular destination, under a
+            particular policy (as reflected in the
+            inetCidrRoutePolicy object).
+
+            Dynamically created rows will survive an agent reboot.
+
+            Implementers need to be aware that if the total number
+            of elements (octets or sub-identifiers) in
+            inetCidrRouteDest, inetCidrRoutePolicy, and
+            inetCidrRouteNextHop exceeds 111, then OIDs of column
+            instances in this table will have more than 128 sub-
+            identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    INDEX {
+        inetCidrRouteDestType,
+        inetCidrRouteDest,
+        inetCidrRoutePfxLen,
+        inetCidrRoutePolicy,
+        inetCidrRouteNextHopType,
+        inetCidrRouteNextHop
+        }
+    ::= { inetCidrRouteTable 1 }
+
+InetCidrRouteEntry ::= SEQUENCE {
+        inetCidrRouteDestType     InetAddressType,
+        inetCidrRouteDest         InetAddress,
+        inetCidrRoutePfxLen       InetAddressPrefixLength,
+        inetCidrRoutePolicy       OBJECT IDENTIFIER,
+        inetCidrRouteNextHopType  InetAddressType,
+        inetCidrRouteNextHop      InetAddress,
+        inetCidrRouteIfIndex      InterfaceIndexOrZero,
+        inetCidrRouteType         INTEGER,
+        inetCidrRouteProto        IANAipRouteProtocol,
+        inetCidrRouteAge          Gauge32,
+        inetCidrRouteNextHopAS    InetAutonomousSystemNumber,
+        inetCidrRouteMetric1      Integer32,
+        inetCidrRouteMetric2      Integer32,
+        inetCidrRouteMetric3      Integer32,
+        inetCidrRouteMetric4      Integer32,
+        inetCidrRouteMetric5      Integer32,
+        inetCidrRouteStatus       RowStatus
+    }
+
+inetCidrRouteDestType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The type of the inetCidrRouteDest address, as defined
+            in the InetAddress MIB.
+
+            Only those address types that may appear in an actual
+            routing table are allowed as values of this object."
+    REFERENCE "RFC 4001"
+    ::= { inetCidrRouteEntry 1 }
+
+inetCidrRouteDest OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The destination IP address of this route.
+
+            The type of this address is determined by the value of
+            the inetCidrRouteDestType object.
+
+            The values for the index objects inetCidrRouteDest and
+            inetCidrRoutePfxLen must be consistent.  When the value
+            of inetCidrRouteDest (excluding the zone index, if one
+            is present) is x, then the bitwise logical-AND
+            of x with the value of the mask formed from the
+            corresponding index object inetCidrRoutePfxLen MUST be
+            equal to x.  If not, then the index pair is not
+            consistent and an inconsistentName error must be
+            returned on SET or CREATE requests."
+    ::= { inetCidrRouteEntry 2 }
+
+inetCidrRoutePfxLen OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Indicates the number of leading one bits that form the
+            mask to be logical-ANDed with the destination address
+            before being compared to the value in the
+
+            inetCidrRouteDest field.
+
+            The values for the index objects inetCidrRouteDest and
+            inetCidrRoutePfxLen must be consistent.  When the value
+            of inetCidrRouteDest (excluding the zone index, if one
+            is present) is x, then the bitwise logical-AND
+            of x with the value of the mask formed from the
+            corresponding index object inetCidrRoutePfxLen MUST be
+            equal to x.  If not, then the index pair is not
+            consistent and an inconsistentName error must be
+            returned on SET or CREATE requests."
+    ::= { inetCidrRouteEntry 3 }
+
+inetCidrRoutePolicy OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This object is an opaque object without any defined
+            semantics.  Its purpose is to serve as an additional
+            index that may delineate between multiple entries to
+            the same destination.  The value { 0 0 } shall be used
+            as the default value for this object."
+    ::= { inetCidrRouteEntry 4 }
+
+inetCidrRouteNextHopType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The type of the inetCidrRouteNextHop address, as
+            defined in the InetAddress MIB.
+
+            Value should be set to unknown(0) for non-remote
+            routes.
+
+            Only those address types that may appear in an actual
+            routing table are allowed as values of this object."
+    REFERENCE "RFC 4001"
+    ::= { inetCidrRouteEntry 5 }
+
+inetCidrRouteNextHop OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "On remote routes, the address of the next system en
+
+            route.  For non-remote routes, a zero length string.
+
+            The type of this address is determined by the value of
+            the inetCidrRouteNextHopType object."
+    ::= { inetCidrRouteEntry 6 }
+
+inetCidrRouteIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The ifIndex value that identifies the local interface
+            through which the next hop of this route should be
+            reached.  A value of 0 is valid and represents the
+            scenario where no interface is specified."
+    ::= { inetCidrRouteEntry 7 }
+
+inetCidrRouteType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other    (1), -- not specified by this MIB
+                reject   (2), -- route that discards traffic and
+                              --   returns ICMP notification
+                local    (3), -- local interface
+                remote   (4), -- remote destination
+                blackhole(5)  -- route that discards traffic
+                              --   silently
+             }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The type of route.  Note that local(3) refers to a
+            route for which the next hop is the final destination;
+            remote(4) refers to a route for which the next hop is
+            not the final destination.
+
+            Routes that do not result in traffic forwarding or
+            rejection should not be displayed, even if the
+            implementation keeps them stored internally.
+
+            reject(2) refers to a route that, if matched, discards
+            the message as unreachable and returns a notification
+            (e.g., ICMP error) to the message sender.  This is used
+            in some protocols as a means of correctly aggregating
+            routes.
+
+            blackhole(5) refers to a route that, if matched,
+            discards the message silently."
+    ::= { inetCidrRouteEntry 8 }
+
+inetCidrRouteProto OBJECT-TYPE
+    SYNTAX     IANAipRouteProtocol
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The routing mechanism via which this route was learned.
+            Inclusion of values for gateway routing protocols is
+            not intended to imply that hosts should support those
+            protocols."
+    ::= { inetCidrRouteEntry 9 }
+
+inetCidrRouteAge OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of seconds since this route was last updated
+            or otherwise determined to be correct.  Note that no
+            semantics of 'too old' can be implied, except through
+            knowledge of the routing protocol by which the route
+            was learned."
+    ::= { inetCidrRouteEntry 10 }
+
+inetCidrRouteNextHopAS OBJECT-TYPE
+    SYNTAX     InetAutonomousSystemNumber
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The Autonomous System Number of the Next Hop.  The
+            semantics of this object are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  When this object is unknown or not relevant, its
+            value should be set to zero."
+    DEFVAL { 0 }
+    ::= { inetCidrRouteEntry 11 }
+
+inetCidrRouteMetric1 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The primary routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 12 }
+
+inetCidrRouteMetric2 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 13 }
+
+inetCidrRouteMetric3 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 14 }
+
+inetCidrRouteMetric4 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 15 }
+
+inetCidrRouteMetric5 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+
+            protocol specified in the route's inetCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { inetCidrRouteEntry 16 }
+
+inetCidrRouteStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The row status variable, used according to row
+            installation and removal conventions.
+
+            A row entry cannot be modified when the status is
+            marked as active(1)."
+    ::= { inetCidrRouteEntry 17 }
+
+--  Conformance information
+
+ipForwardConformance
+     OBJECT IDENTIFIER ::= { ipForward 5 }
+
+ipForwardGroups
+     OBJECT IDENTIFIER ::= { ipForwardConformance 1 }
+
+ipForwardCompliances
+     OBJECT IDENTIFIER ::= { ipForwardConformance 2 }
+
+--  Compliance statements
+
+ipForwardFullCompliance MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+           "When this MIB is implemented for read-create, the
+            implementation can claim full compliance.
+
+            There are a number of INDEX objects that cannot be
+            represented in the form of OBJECT clauses in SMIv2,
+            but for which there are compliance requirements,
+            expressed in OBJECT clause form in this description:
+
+            -- OBJECT      inetCidrRouteDestType
+            -- SYNTAX      InetAddressType (ipv4(1), ipv6(2),
+            --                              ipv4z(3), ipv6z(4))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global ipv4 and ipv6 addresses.
+
+            --
+            -- OBJECT      inetCidrRouteDest
+            -- SYNTAX      InetAddress (SIZE (4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global IPv4 and IPv6 addresses.
+            --
+            -- OBJECT      inetCidrRouteNextHopType
+            -- SYNTAX      InetAddressType (unknown(0), ipv4(1),
+            --                              ipv6(2), ipv4z(3)
+            --                              ipv6z(4))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global ipv4 and ipv6 addresses.
+            --
+            -- OBJECT      inetCidrRouteNextHop
+            -- SYNTAX      InetAddress (SIZE (0 | 4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for global and
+            --     non-global IPv4 and IPv6 addresses.
+            "
+
+   MODULE -- this module
+   MANDATORY-GROUPS { inetForwardCidrRouteGroup }
+
+   OBJECT        inetCidrRouteStatus
+   SYNTAX        RowStatus { active(1), notInService (2) }
+   WRITE-SYNTAX  RowStatus { active(1), notInService (2),
+                             createAndGo(4), destroy(6) }
+   DESCRIPTION  "Support for createAndWait is not required."
+   ::= { ipForwardCompliances 3 }
+
+ipForwardReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS     current
+   DESCRIPTION
+           "When this MIB is implemented without support for read-
+            create (i.e., in read-only mode), the implementation can
+            claim read-only compliance."
+   MODULE -- this module
+   MANDATORY-GROUPS { inetForwardCidrRouteGroup }
+
+   OBJECT      inetCidrRouteIfIndex
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteType
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteNextHopAS
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric1
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric2
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric3
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric4
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteMetric5
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+
+   OBJECT      inetCidrRouteStatus
+   SYNTAX      RowStatus { active(1) }
+   MIN-ACCESS  read-only
+   DESCRIPTION
+      "Write access is not required."
+   ::= { ipForwardCompliances 4 }
+
+-- units of conformance
+
+inetForwardCidrRouteGroup OBJECT-GROUP
+    OBJECTS { inetCidrRouteDiscards,
+              inetCidrRouteIfIndex, inetCidrRouteType,
+              inetCidrRouteProto, inetCidrRouteAge,
+              inetCidrRouteNextHopAS, inetCidrRouteMetric1,
+              inetCidrRouteMetric2, inetCidrRouteMetric3,
+              inetCidrRouteMetric4, inetCidrRouteMetric5,
+              inetCidrRouteStatus, inetCidrRouteNumber
+        }
+    STATUS     current
+    DESCRIPTION
+           "The IP version-independent CIDR Route Table."
+    ::= { ipForwardGroups 4 }
+
+--  Deprecated Objects
+
+ipCidrRouteNumber OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of current ipCidrRouteTable entries that are
+            not invalid.  This object is deprecated in favor of
+            inetCidrRouteNumber and the inetCidrRouteTable."
+    ::= { ipForward 3 }
+
+--  IP CIDR Route Table
+
+--  The IP CIDR Route Table obsoletes and replaces the ipRoute
+--  Table current in MIB-I and MIB-II and the IP Forwarding Table.
+--  It adds knowledge of the autonomous system of the next hop,
+--  multiple next hops, policy routing, and Classless
+--  Inter-Domain Routing.
+
+ipCidrRouteTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "This entity's IP Routing table.  This table has been
+            deprecated in favor of the IP version neutral
+            inetCidrRouteTable."
+    REFERENCE
+           "RFC 1213 Section 6.6, The IP Group"
+    ::= { ipForward 4 }
+
+ipCidrRouteEntry OBJECT-TYPE
+    SYNTAX     IpCidrRouteEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "A particular route to a particular destination, under a
+
+            particular policy."
+    INDEX {
+        ipCidrRouteDest,
+        ipCidrRouteMask,
+        ipCidrRouteTos,
+        ipCidrRouteNextHop
+        }
+       ::= { ipCidrRouteTable 1 }
+
+IpCidrRouteEntry ::= SEQUENCE {
+        ipCidrRouteDest       IpAddress,
+        ipCidrRouteMask       IpAddress,
+        ipCidrRouteTos        Integer32,
+        ipCidrRouteNextHop    IpAddress,
+        ipCidrRouteIfIndex    Integer32,
+        ipCidrRouteType       INTEGER,
+        ipCidrRouteProto      INTEGER,
+        ipCidrRouteAge        Integer32,
+        ipCidrRouteInfo       OBJECT IDENTIFIER,
+        ipCidrRouteNextHopAS  Integer32,
+        ipCidrRouteMetric1    Integer32,
+        ipCidrRouteMetric2    Integer32,
+        ipCidrRouteMetric3    Integer32,
+        ipCidrRouteMetric4    Integer32,
+        ipCidrRouteMetric5    Integer32,
+        ipCidrRouteStatus     RowStatus
+    }
+
+ipCidrRouteDest OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The destination IP address of this route.
+
+            This object may not take a Multicast (Class D) address
+            value.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipCidrRouteMask object is
+            not equal to x."
+    ::= { ipCidrRouteEntry 1 }
+
+ipCidrRouteMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "Indicate the mask to be logical-ANDed with the
+            destination address before being compared to the value
+            in the ipCidrRouteDest field.  For those systems that
+            do not support arbitrary subnet masks, an agent
+            constructs the value of the ipCidrRouteMask by
+            reference to the IP Address Class.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipCidrRouteDest object is
+            not equal to ipCidrRouteDest."
+    ::= { ipCidrRouteEntry 2 }
+
+-- The following convention is included for specification
+-- of TOS Field contents.  At this time, the Host Requirements
+-- and the Router Requirements documents disagree on the width
+-- of the TOS field.  This mapping describes the Router
+-- Requirements mapping, and leaves room to widen the TOS field
+-- without impact to fielded systems.
+
+ipCidrRouteTos OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The policy specifier is the IP TOS Field.  The encoding
+            of IP TOS is as specified by the following convention.
+            Zero indicates the default path if no more specific
+            policy applies.
+
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+            |                 |                       |     |
+            |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
+            |                 |                       |     |
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+
+                         IP TOS                IP TOS
+               Field     Policy      Field     Policy
+               Contents    Code      Contents    Code
+               0 0 0 0  ==>   0      0 0 0 1  ==>   2
+               0 0 1 0  ==>   4      0 0 1 1  ==>   6
+               0 1 0 0  ==>   8      0 1 0 1  ==>  10
+               0 1 1 0  ==>  12      0 1 1 1  ==>  14
+               1 0 0 0  ==>  16      1 0 0 1  ==>  18
+               1 0 1 0  ==>  20      1 0 1 1  ==>  22
+
+               1 1 0 0  ==>  24      1 1 0 1  ==>  26
+               1 1 1 0  ==>  28      1 1 1 1  ==>  30"
+    ::= { ipCidrRouteEntry 3 }
+
+ipCidrRouteNextHop OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "On remote routes, the address of the next system en
+            route; Otherwise, 0.0.0.0."
+    ::= { ipCidrRouteEntry 4 }
+
+ipCidrRouteIfIndex OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The ifIndex value that identifies the local interface
+            through which the next hop of this route should be
+            reached."
+    DEFVAL { 0 }
+    ::= { ipCidrRouteEntry 5 }
+
+ipCidrRouteType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other    (1), -- not specified by this MIB
+                reject   (2), -- route that discards traffic
+                local    (3), -- local interface
+                remote   (4)  -- remote destination
+             }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The type of route.  Note that local(3) refers to a
+            route for which the next hop is the final destination;
+            remote(4) refers to a route for which the next hop is
+            not the final destination.
+
+            Routes that do not result in traffic forwarding or
+            rejection should not be displayed, even if the
+            implementation keeps them stored internally.
+
+            reject (2) refers to a route that, if matched,
+            discards the message as unreachable.  This is used in
+            some protocols as a means of correctly aggregating
+            routes."
+    ::= { ipCidrRouteEntry 6 }
+
+ipCidrRouteProto OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other     (1),  -- not specified
+                local     (2),  -- local interface
+                netmgmt   (3),  -- static route
+                icmp      (4),  -- result of ICMP Redirect
+
+                        -- the following are all dynamic
+                        -- routing protocols
+                egp        (5),  -- Exterior Gateway Protocol
+                ggp        (6),  -- Gateway-Gateway Protocol
+                hello      (7),  -- FuzzBall HelloSpeak
+                rip        (8),  -- Berkeley RIP or RIP-II
+                isIs       (9),  -- Dual IS-IS
+                esIs       (10), -- ISO 9542
+                ciscoIgrp  (11), -- Cisco IGRP
+                bbnSpfIgp  (12), -- BBN SPF IGP
+                ospf       (13), -- Open Shortest Path First
+                bgp        (14), -- Border Gateway Protocol
+                idpr       (15), -- InterDomain Policy Routing
+                ciscoEigrp (16)  -- Cisco EIGRP
+             }
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The routing mechanism via which this route was learned.
+            Inclusion of values for gateway routing protocols is
+            not intended to imply that hosts should support those
+            protocols."
+    ::= { ipCidrRouteEntry 7 }
+
+ipCidrRouteAge OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of seconds since this route was last updated
+            or otherwise determined to be correct.  Note that no
+            semantics of `too old' can be implied, except through
+            knowledge of the routing protocol by which the route
+            was learned."
+    DEFVAL  { 0 }
+    ::= { ipCidrRouteEntry 8 }
+
+ipCidrRouteInfo OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "A reference to MIB definitions specific to the
+            particular routing protocol that is responsible for
+            this route, as determined by the value specified in the
+            route's ipCidrRouteProto value.  If this information is
+            not present, its value should be set to the OBJECT
+            IDENTIFIER { 0 0 }, which is a syntactically valid
+            object identifier, and any implementation conforming to
+            ASN.1 and the Basic Encoding Rules must be able to
+            generate and recognize this value."
+    ::= { ipCidrRouteEntry 9 }
+
+ipCidrRouteNextHopAS OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The Autonomous System Number of the Next Hop.  The
+            semantics of this object are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  When this object is unknown or not relevant, its
+            value should be set to zero."
+    DEFVAL { 0 }
+    ::= { ipCidrRouteEntry 10 }
+
+ipCidrRouteMetric1 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The primary routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 11 }
+
+ipCidrRouteMetric2 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 12 }
+
+ipCidrRouteMetric3 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 13 }
+
+ipCidrRouteMetric4 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 14 }
+
+ipCidrRouteMetric5 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipCidrRouteProto
+            value.  If this metric is not used, its value should be
+            set to -1."
+    DEFVAL { -1 }
+    ::= { ipCidrRouteEntry 15 }
+
+ipCidrRouteStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The row status variable, used according to row
+            installation and removal conventions."
+    ::= { ipCidrRouteEntry 16 }
+
+-- compliance statements
+
+ipForwardCompliance MODULE-COMPLIANCE
+    STATUS     deprecated
+    DESCRIPTION
+           "The compliance statement for SNMPv2 entities that
+            implement the ipForward MIB.
+
+            This compliance statement has been deprecated and
+            replaced with ipForwardFullCompliance and
+            ipForwardReadOnlyCompliance."
+
+   MODULE  -- this module
+   MANDATORY-GROUPS { ipForwardCidrRouteGroup }
+   ::= { ipForwardCompliances 1 }
+
+-- units of conformance
+
+ipForwardCidrRouteGroup OBJECT-GROUP
+    OBJECTS { ipCidrRouteNumber,
+              ipCidrRouteDest, ipCidrRouteMask, ipCidrRouteTos,
+              ipCidrRouteNextHop, ipCidrRouteIfIndex,
+              ipCidrRouteType, ipCidrRouteProto, ipCidrRouteAge,
+              ipCidrRouteInfo,ipCidrRouteNextHopAS,
+              ipCidrRouteMetric1, ipCidrRouteMetric2,
+              ipCidrRouteMetric3, ipCidrRouteMetric4,
+              ipCidrRouteMetric5, ipCidrRouteStatus
+        }
+    STATUS     deprecated
+    DESCRIPTION
+           "The CIDR Route Table.
+
+            This group has been deprecated and replaced with
+            inetForwardCidrRouteGroup."
+    ::= { ipForwardGroups 3 }
+
+-- Obsoleted Definitions - Objects
+
+ipForwardNumber OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The number of current ipForwardTable entries that are
+            not invalid."
+    ::= { ipForward 1 }
+
+--  IP Forwarding Table
+
+--  The IP Forwarding Table obsoletes and replaces the ipRoute
+--  Table current in MIB-I and MIB-II.  It adds knowledge of
+--  the autonomous system of the next hop, multiple next hop
+--  support, and policy routing support.
+
+ipForwardTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpForwardEntry
+    MAX-ACCESS not-accessible
+    STATUS     obsolete
+    DESCRIPTION
+           "This entity's IP Routing table."
+    REFERENCE
+           "RFC 1213 Section 6.6, The IP Group"
+    ::= { ipForward 2 }
+
+ipForwardEntry OBJECT-TYPE
+    SYNTAX     IpForwardEntry
+    MAX-ACCESS not-accessible
+    STATUS     obsolete
+    DESCRIPTION
+           "A particular route to a particular destination, under a
+            particular policy."
+    INDEX {
+        ipForwardDest,
+        ipForwardProto,
+        ipForwardPolicy,
+        ipForwardNextHop
+        }
+    ::= { ipForwardTable 1 }
+
+IpForwardEntry ::= SEQUENCE {
+        ipForwardDest       IpAddress,
+        ipForwardMask       IpAddress,
+        ipForwardPolicy     Integer32,
+        ipForwardNextHop    IpAddress,
+        ipForwardIfIndex    Integer32,
+        ipForwardType       INTEGER,
+        ipForwardProto      INTEGER,
+        ipForwardAge        Integer32,
+        ipForwardInfo       OBJECT IDENTIFIER,
+        ipForwardNextHopAS  Integer32,
+        ipForwardMetric1    Integer32,
+        ipForwardMetric2    Integer32,
+        ipForwardMetric3    Integer32,
+        ipForwardMetric4    Integer32,
+        ipForwardMetric5    Integer32
+    }
+
+ipForwardDest OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The destination IP address of this route.  An entry
+            with a value of 0.0.0.0 is considered a default route.
+
+            This object may not take a Multicast (Class D) address
+            value.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipForwardMask object is
+            not equal to x."
+    ::= { ipForwardEntry 1 }
+
+ipForwardMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "Indicate the mask to be logical-ANDed with the
+            destination address before being compared to the value
+            in the ipForwardDest field.  For those systems that do
+            not support arbitrary subnet masks, an agent constructs
+            the value of the ipForwardMask by reference to the IP
+            Address Class.
+
+            Any assignment (implicit or otherwise) of an instance
+            of this object to a value x must be rejected if the
+            bitwise logical-AND of x with the value of the
+            corresponding instance of the ipForwardDest object is
+            not equal to ipForwardDest."
+    DEFVAL { '00000000'H }      -- 0.0.0.0
+    ::= { ipForwardEntry 2 }
+
+-- The following convention is included for specification
+-- of TOS Field contents.  At this time, the Host Requirements
+-- and the Router Requirements documents disagree on the width
+-- of the TOS field.  This mapping describes the Router
+
+-- Requirements mapping, and leaves room to widen the TOS field
+-- without impact to fielded systems.
+
+ipForwardPolicy OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The general set of conditions that would cause
+            the selection of one multipath route (set of
+            next hops for a given destination) is referred
+            to as 'policy'.
+
+            Unless the mechanism indicated by ipForwardProto
+            specifies otherwise, the policy specifier is
+            the IP TOS Field.  The encoding of IP TOS is as
+            specified by the following convention.  Zero
+            indicates the default path if no more specific
+            policy applies.
+
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+            |                 |                       |     |
+            |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
+            |                 |                       |     |
+            +-----+-----+-----+-----+-----+-----+-----+-----+
+
+                         IP TOS                IP TOS
+               Field     Policy      Field     Policy
+               Contents    Code      Contents    Code
+               0 0 0 0  ==>   0      0 0 0 1  ==>   2
+               0 0 1 0  ==>   4      0 0 1 1  ==>   6
+               0 1 0 0  ==>   8      0 1 0 1  ==>  10
+               0 1 1 0  ==>  12      0 1 1 1  ==>  14
+               1 0 0 0  ==>  16      1 0 0 1  ==>  18
+               1 0 1 0  ==>  20      1 0 1 1  ==>  22
+               1 1 0 0  ==>  24      1 1 0 1  ==>  26
+               1 1 1 0  ==>  28      1 1 1 1  ==>  30
+
+            Protocols defining 'policy' otherwise must either
+            define a set of values that are valid for
+            this object or must implement an integer-instanced
+            policy table for which this object's
+            value acts as an index."
+    ::= { ipForwardEntry 3 }
+
+ipForwardNextHop OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "On remote routes, the address of the next system en
+            route; otherwise, 0.0.0.0."
+    ::= { ipForwardEntry 4 }
+
+ipForwardIfIndex OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The ifIndex value that identifies the local interface
+            through which the next hop of this route should be
+            reached."
+    DEFVAL { 0 }
+    ::= { ipForwardEntry 5 }
+
+ipForwardType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other    (1), -- not specified by this MIB
+                invalid  (2), -- logically deleted
+                local    (3), -- local interface
+                remote   (4)  -- remote destination
+             }
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The type of route.  Note that local(3) refers to a
+            route for which the next hop is the final destination;
+            remote(4) refers to a route for which the next hop is
+            not the final destination.
+
+            Setting this object to the value invalid(2) has the
+            effect of invalidating the corresponding entry in the
+            ipForwardTable object.  That is, it effectively
+            disassociates the destination identified with said
+            entry from the route identified with said entry.  It is
+            an implementation-specific matter as to whether the
+            agent removes an invalidated entry from the table.
+            Accordingly, management stations must be prepared to
+            receive tabular information from agents that
+            corresponds to entries not currently in use.  Proper
+            interpretation of such entries requires examination of
+            the relevant ipForwardType object."
+    DEFVAL { invalid }
+    ::= { ipForwardEntry 6 }
+
+ipForwardProto OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other     (1),  -- not specified
+                local     (2),  -- local interface
+                netmgmt   (3),  -- static route
+                icmp      (4),  -- result of ICMP Redirect
+
+                        -- the following are all dynamic
+                        -- routing protocols
+                egp       (5),  -- Exterior Gateway Protocol
+                ggp       (6),  -- Gateway-Gateway Protocol
+                hello     (7),  -- FuzzBall HelloSpeak
+                rip       (8),  -- Berkeley RIP or RIP-II
+                is-is     (9),  -- Dual IS-IS
+                es-is     (10), -- ISO 9542
+                ciscoIgrp (11), -- Cisco IGRP
+                bbnSpfIgp (12), -- BBN SPF IGP
+                ospf      (13), -- Open Shortest Path First
+                bgp       (14), -- Border Gateway Protocol
+                idpr      (15)  -- InterDomain Policy Routing
+             }
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The routing mechanism via which this route was learned.
+            Inclusion of values for gateway routing protocols is
+            not intended to imply that hosts should support those
+            protocols."
+    ::= { ipForwardEntry 7 }
+
+ipForwardAge OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-only
+    STATUS     obsolete
+    DESCRIPTION
+           "The number of seconds since this route was last updated
+            or otherwise determined to be correct.  Note that no
+            semantics of `too old' can be implied except through
+            knowledge of the routing protocol by which the route
+            was learned."
+    DEFVAL  { 0 }
+    ::= { ipForwardEntry 8 }
+
+ipForwardInfo OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "A reference to MIB definitions specific to the
+            particular routing protocol that is responsible for
+            this route, as determined by the value specified in the
+            route's ipForwardProto value.  If this information is
+            not present, its value should be set to the OBJECT
+            IDENTIFIER { 0 0 }, which is a syntactically valid
+            object identifier, and any implementation conforming to
+            ASN.1 and the Basic Encoding Rules must be able to
+            generate and recognize this value."
+    ::= { ipForwardEntry 9 }
+
+ipForwardNextHopAS OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The Autonomous System Number of the Next Hop.  When
+            this is unknown or not relevant to the protocol
+            indicated by ipForwardProto, zero."
+    DEFVAL { 0 }
+    ::= { ipForwardEntry 10 }
+
+ipForwardMetric1 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "The primary routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 11 }
+
+ipForwardMetric2 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 12 }
+
+ipForwardMetric3 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 13 }
+
+ipForwardMetric4 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 14 }
+
+ipForwardMetric5 OBJECT-TYPE
+    SYNTAX     Integer32
+    MAX-ACCESS read-create
+    STATUS     obsolete
+    DESCRIPTION
+           "An alternate routing metric for this route.  The
+            semantics of this metric are determined by the routing-
+            protocol specified in the route's ipForwardProto value.
+            If this metric is not used, its value should be set to
+            -1."
+    DEFVAL { -1 }
+    ::= { ipForwardEntry 15 }
+
+-- Obsoleted Definitions - Groups
+-- compliance statements
+
+ipForwardOldCompliance MODULE-COMPLIANCE
+    STATUS     obsolete
+    DESCRIPTION
+           "The compliance statement for SNMP entities that
+            implement the ipForward MIB."
+
+   MODULE  -- this module
+   MANDATORY-GROUPS { ipForwardMultiPathGroup }
+   ::= { ipForwardCompliances 2 }
+
+ipForwardMultiPathGroup OBJECT-GROUP
+    OBJECTS { ipForwardNumber,
+              ipForwardDest, ipForwardMask, ipForwardPolicy,
+              ipForwardNextHop, ipForwardIfIndex, ipForwardType,
+              ipForwardProto, ipForwardAge, ipForwardInfo,
+              ipForwardNextHopAS,
+              ipForwardMetric1, ipForwardMetric2, ipForwardMetric3,
+              ipForwardMetric4, ipForwardMetric5
+        }
+    STATUS     obsolete
+    DESCRIPTION
+           "IP Multipath Route Table."
+    ::= { ipForwardGroups 2 }
+
+END
diff --git a/share/snmp/IP-MIB.txt b/share/snmp/IP-MIB.txt
new file mode 100644
index 00000000000..fe2db5f235e
--- /dev/null
+++ b/share/snmp/IP-MIB.txt
@@ -0,0 +1,4993 @@
+IP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Integer32, Counter32, IpAddress,
+    mib-2, Unsigned32, Counter64,
+    zeroDotZero                        FROM SNMPv2-SMI
+    PhysAddress, TruthValue,
+    TimeStamp, RowPointer,
+    TEXTUAL-CONVENTION, TestAndIncr,
+    RowStatus, StorageType             FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF
+    InetAddress, InetAddressType,
+    InetAddressPrefixLength,
+    InetVersion, InetZoneIndex         FROM INET-ADDRESS-MIB
+    InterfaceIndex                     FROM IF-MIB;
+
+ipMIB MODULE-IDENTITY
+    LAST-UPDATED "200602020000Z"
+    ORGANIZATION "IETF IPv6 MIB Revision Team"
+    CONTACT-INFO
+           "Editor:
+
+            Shawn A. Routhier
+            Interworking Labs
+            108 Whispering Pines Dr. Suite 235
+            Scotts Valley, CA 95066
+            USA
+            EMail: <sar@iwl.com>"
+    DESCRIPTION
+           "The MIB module for managing IP and ICMP implementations, but
+            excluding their management of IP routes.
+
+            Copyright (C) The Internet Society (2006).  This version of
+            this MIB module is part of RFC 4293; see the RFC itself for
+            full legal notices."
+
+    REVISION      "200602020000Z"
+    DESCRIPTION
+           "The IP version neutral revision with added IPv6 objects for
+            ND, default routers, and router advertisements.  As well as
+            being the successor to RFC 2011, this MIB is also the
+            successor to RFCs 2465 and 2466.  Published as RFC 4293."
+
+    REVISION      "199411010000Z"
+    DESCRIPTION
+           "A separate MIB module (IP-MIB) for IP and ICMP management
+            objects.  Published as RFC 2011."
+
+    REVISION      "199103310000Z"
+    DESCRIPTION
+           "The initial revision of this MIB module was part of MIB-II,
+            which was published as RFC 1213."
+    ::= { mib-2 48}
+
+--
+-- The textual conventions we define and use in this MIB.
+--
+
+IpAddressOriginTC ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+           "The origin of the address.
+
+            manual(2) indicates that the address was manually configured
+            to a specified address, e.g., by user configuration.
+
+            dhcp(4) indicates an address that was assigned to this
+            system by a DHCP server.
+
+            linklayer(5) indicates an address created by IPv6 stateless
+
+            auto-configuration.
+
+            random(6) indicates an address chosen by the system at
+            random, e.g., an IPv4 address within 169.254/16, or an RFC
+            3041 privacy address."
+    SYNTAX     INTEGER {
+        other(1),
+        manual(2),
+        dhcp(4),
+        linklayer(5),
+        random(6)
+    }
+
+IpAddressStatusTC ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+           "The status of an address.  Most of the states correspond to
+            states from the IPv6 Stateless Address Autoconfiguration
+            protocol.
+
+            The preferred(1) state indicates that this is a valid
+            address that can appear as the destination or source address
+            of a packet.
+
+            The deprecated(2) state indicates that this is a valid but
+            deprecated address that should no longer be used as a source
+            address in new communications, but packets addressed to such
+            an address are processed as expected.
+
+            The invalid(3) state indicates that this isn't a valid
+            address and it shouldn't appear as the destination or source
+            address of a packet.
+
+            The inaccessible(4) state indicates that the address is not
+            accessible because the interface to which this address is
+            assigned is not operational.
+
+            The unknown(5) state indicates that the status cannot be
+            determined for some reason.
+
+            The tentative(6) state indicates that the uniqueness of the
+            address on the link is being verified.  Addresses in this
+            state should not be used for general communication and
+            should only be used to determine the uniqueness of the
+            address.
+
+            The duplicate(7) state indicates the address has been
+            determined to be non-unique on the link and so must not be
+
+            used.
+
+            The optimistic(8) state indicates the address is available
+            for use, subject to restrictions, while its uniqueness on
+            a link is being verified.
+
+            In the absence of other information, an IPv4 address is
+            always preferred(1)."
+    REFERENCE "RFC 2462"
+    SYNTAX     INTEGER {
+        preferred(1),
+        deprecated(2),
+        invalid(3),
+        inaccessible(4),
+        unknown(5),
+        tentative(6),
+        duplicate(7),
+        optimistic(8)
+    }
+
+IpAddressPrefixOriginTC ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+           "The origin of this prefix.
+
+            manual(2) indicates a prefix that was manually configured.
+
+            wellknown(3) indicates a well-known prefix, e.g., 169.254/16
+            for IPv4 auto-configuration or fe80::/10 for IPv6 link-local
+            addresses.  Well known prefixes may be assigned by IANA,
+            the address registries, or by specification in a standards
+            track RFC.
+
+            dhcp(4) indicates a prefix that was assigned by a DHCP
+            server.
+
+            routeradv(5) indicates a prefix learned from a router
+            advertisement.
+
+            Note: while IpAddressOriginTC and IpAddressPrefixOriginTC
+            are similar, they are not identical.  The first defines how
+            an address was created, while the second defines how a
+            prefix was found."
+    SYNTAX     INTEGER {
+        other(1),
+        manual(2),
+        wellknown(3),
+        dhcp(4),
+        routeradv(5)
+    }
+
+Ipv6AddressIfIdentifierTC ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "2x:"
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model IPv6 address
+       interface identifiers.  This is a binary string
+       of up to 8 octets in network byte-order."
+     SYNTAX      OCTET STRING (SIZE (0..8))
+
+--
+-- the IP general group
+-- some objects that affect all of IPv4
+--
+
+ip       OBJECT IDENTIFIER ::= { mib-2 4 }
+
+ipForwarding OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    forwarding(1),    -- acting as a router
+                    notForwarding(2)  -- NOT acting as a router
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether this entity is acting as an IPv4
+            router in respect to the forwarding of datagrams received
+            by, but not addressed to, this entity.  IPv4 routers forward
+            datagrams.  IPv4 hosts do not (except those source-routed
+            via the host).
+
+            When this object is written, the entity should save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system.
+            Note: a stronger requirement is not used because this object
+            was previously defined."
+    ::= { ip 1 }
+
+ipDefaultTTL OBJECT-TYPE
+    SYNTAX     Integer32 (1..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The default value inserted into the Time-To-Live field of
+            the IPv4 header of datagrams originated at this entity,
+            whenever a TTL value is not supplied by the transport layer
+
+            protocol.
+
+            When this object is written, the entity should save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system.
+            Note: a stronger requirement is not used because this object
+            was previously defined."
+    ::= { ip 2 }
+
+ipReasmTimeout OBJECT-TYPE
+    SYNTAX     Integer32
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The maximum number of seconds that received fragments are
+            held while they are awaiting reassembly at this entity."
+    ::= { ip 13 }
+
+--
+-- the IPv6 general group
+-- Some objects that affect all of IPv6
+--
+
+ipv6IpForwarding OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    forwarding(1),    -- acting as a router
+                    notForwarding(2)  -- NOT acting as a router
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether this entity is acting as an IPv6
+            router on any interface in respect to the forwarding of
+            datagrams received by, but not addressed to, this entity.
+            IPv6 routers forward datagrams.  IPv6 hosts do not (except
+            those source-routed via the host).
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    ::= { ip 25 }
+
+ipv6IpDefaultHopLimit OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The default value inserted into the Hop Limit field of the
+            IPv6 header of datagrams originated at this entity whenever
+            a Hop Limit value is not supplied by the transport layer
+            protocol.
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    REFERENCE "RFC 2461 Section 6.3.2"
+    ::= { ip 26 }
+
+--
+-- IPv4 Interface Table
+--
+
+ipv4InterfaceTableLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            a row in the ipv4InterfaceTable was added or deleted, or
+            when an ipv4InterfaceReasmMaxSize or an
+            ipv4InterfaceEnableStatus object was modified.
+
+            If new objects are added to the ipv4InterfaceTable that
+            require the ipv4InterfaceTableLastChange to be updated when
+            they are modified, they must specify that requirement in
+            their description clause."
+    ::= { ip 27 }
+
+ipv4InterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv4InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing per-interface IPv4-specific
+            information."
+    ::= { ip 28 }
+
+ipv4InterfaceEntry OBJECT-TYPE
+    SYNTAX     Ipv4InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry containing IPv4-specific information for a specific
+            interface."
+    INDEX { ipv4InterfaceIfIndex }
+    ::= { ipv4InterfaceTable 1 }
+
+Ipv4InterfaceEntry ::= SEQUENCE {
+        ipv4InterfaceIfIndex         InterfaceIndex,
+        ipv4InterfaceReasmMaxSize    Integer32,
+        ipv4InterfaceEnableStatus    INTEGER,
+        ipv4InterfaceRetransmitTime  Unsigned32
+    }
+
+ipv4InterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv4InterfaceEntry 1 }
+
+ipv4InterfaceReasmMaxSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..65535)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The size of the largest IPv4 datagram that this entity can
+            re-assemble from incoming IPv4 fragmented datagrams received
+            on this interface."
+    ::= { ipv4InterfaceEntry 2 }
+
+ipv4InterfaceEnableStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 up(1),
+                 down(2)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether IPv4 is enabled (up) or disabled
+            (down) on this interface.  This object does not affect the
+            state of the interface itself, only its connection to an
+            IPv4 stack.  The IF-MIB should be used to control the state
+            of the interface."
+    ::= { ipv4InterfaceEntry 3 }
+
+ipv4InterfaceRetransmitTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time between retransmissions of ARP requests to a
+            neighbor when resolving the address or when probing the
+            reachability of a neighbor."
+    REFERENCE "RFC 1122"
+    DEFVAL { 1000 }
+    ::= { ipv4InterfaceEntry 4 }
+
+--
+-- v6 interface table
+--
+
+ipv6InterfaceTableLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            a row in the ipv6InterfaceTable was added or deleted or when
+            an ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier,
+            ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime,
+            ipv6InterfaceRetransmitTime, or ipv6InterfaceForwarding
+            object was modified.
+
+            If new objects are added to the ipv6InterfaceTable that
+            require the ipv6InterfaceTableLastChange to be updated when
+            they are modified, they must specify that requirement in
+            their description clause."
+    ::= { ip 29 }
+
+ipv6InterfaceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv6InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing per-interface IPv6-specific
+            information."
+    ::= { ip 30 }
+
+ipv6InterfaceEntry OBJECT-TYPE
+    SYNTAX     Ipv6InterfaceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry containing IPv6-specific information for a given
+            interface."
+    INDEX { ipv6InterfaceIfIndex }
+    ::= { ipv6InterfaceTable 1 }
+
+Ipv6InterfaceEntry ::= SEQUENCE {
+        ipv6InterfaceIfIndex         InterfaceIndex,
+        ipv6InterfaceReasmMaxSize    Unsigned32,
+        ipv6InterfaceIdentifier      Ipv6AddressIfIdentifierTC,
+        ipv6InterfaceEnableStatus    INTEGER,
+        ipv6InterfaceReachableTime   Unsigned32,
+        ipv6InterfaceRetransmitTime  Unsigned32,
+        ipv6InterfaceForwarding      INTEGER
+    }
+
+ipv6InterfaceIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv6InterfaceEntry 1 }
+
+ipv6InterfaceReasmMaxSize OBJECT-TYPE
+    SYNTAX     Unsigned32 (1500..65535)
+    UNITS      "octets"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The size of the largest IPv6 datagram that this entity can
+            re-assemble from incoming IPv6 fragmented datagrams received
+            on this interface."
+    ::= { ipv6InterfaceEntry 2 }
+
+ipv6InterfaceIdentifier OBJECT-TYPE
+    SYNTAX     Ipv6AddressIfIdentifierTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The Interface Identifier for this interface.  The Interface
+            Identifier is combined with an address prefix to form an
+            interface address.
+
+            By default, the Interface Identifier is auto-configured
+            according to the rules of the link type to which this
+            interface is attached.
+
+            A zero length identifier may be used where appropriate.  One
+            possible example is a loopback interface."
+    ::= { ipv6InterfaceEntry 3 }
+
+-- This object ID is reserved as it was used in earlier versions of
+-- the MIB module.  In theory, OIDs are not assigned until the
+-- specification is released as an RFC; however, as some companies
+-- may have shipped code based on earlier versions of the MIB, it
+-- seems best to reserve this OID.  This OID had been
+-- ipv6InterfacePhysicalAddress.
+-- ::= { ipv6InterfaceEntry 4}
+
+ipv6InterfaceEnableStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 up(1),
+                 down(2)
+    }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether IPv6 is enabled (up) or disabled
+            (down) on this interface.  This object does not affect the
+            state of the interface itself, only its connection to an
+            IPv6 stack.  The IF-MIB should be used to control the state
+            of the interface.
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    ::= { ipv6InterfaceEntry 5 }
+
+ipv6InterfaceReachableTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time a neighbor is considered reachable after receiving
+            a reachability confirmation."
+    REFERENCE "RFC 2461, Section 6.3.2"
+    ::= { ipv6InterfaceEntry 6 }
+
+ipv6InterfaceRetransmitTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The time between retransmissions of Neighbor Solicitation
+            messages to a neighbor when resolving the address or when
+            probing the reachability of a neighbor."
+    REFERENCE "RFC 2461, Section 6.3.2"
+    ::= { ipv6InterfaceEntry 7 }
+
+ipv6InterfaceForwarding OBJECT-TYPE
+    SYNTAX     INTEGER {
+                    forwarding(1),    -- acting as a router
+                    notForwarding(2)  -- NOT acting as a router
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "The indication of whether this entity is acting as an IPv6
+            router on this interface with respect to the forwarding of
+            datagrams received by, but not addressed to, this entity.
+            IPv6 routers forward datagrams.  IPv6 hosts do not (except
+            those source-routed via the host).
+
+            This object is constrained by ipv6IpForwarding and is
+            ignored if ipv6IpForwarding is set to notForwarding.  Those
+            systems that do not provide per-interface control of the
+            forwarding function should set this object to forwarding for
+            all interfaces and allow the ipv6IpForwarding object to
+            control the forwarding capability.
+
+            When this object is written, the entity SHOULD save the
+            change to non-volatile storage and restore the object from
+            non-volatile storage upon re-initialization of the system."
+    ::= { ipv6InterfaceEntry 8 }
+
+--
+-- Per-Interface or System-Wide IP statistics.
+--
+-- The following two tables, ipSystemStatsTable and ipIfStatsTable,
+-- are intended to provide the same counters at different granularities.
+-- The ipSystemStatsTable provides system wide counters aggregating
+-- the traffic counters for all interfaces for a given address type.
+-- The ipIfStatsTable provides the same counters but for specific
+-- interfaces rather than as an aggregate.
+--
+-- Note well: If a system provides both system-wide and interface-
+-- specific values, the system-wide value may not be equal to the sum
+-- of the interface-specific values across all interfaces due to e.g.,
+-- dynamic interface creation/deletion.
+--
+-- Note well: Both of these tables contain some items that are
+
+-- represented by two objects, representing the value in either 32
+-- or 64 bits.  For those objects, the 32-bit value MUST be the low
+-- order 32 bits of the 64-bit value.  Also note that the 32-bit
+-- counters must be included when the 64-bit counters are included.
+
+ipTrafficStats OBJECT IDENTIFIER ::= { ip 31 }
+
+ipSystemStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpSystemStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing system wide, IP version specific
+            traffic statistics.  This table and the ipIfStatsTable
+            contain similar objects whose difference is in their
+            granularity.  Where this table contains system wide traffic
+            statistics, the ipIfStatsTable contains the same statistics
+            but counted on a per-interface basis."
+    ::= { ipTrafficStats 1 }
+
+ipSystemStatsEntry OBJECT-TYPE
+    SYNTAX     IpSystemStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A statistics entry containing system-wide objects for a
+            particular IP version."
+    INDEX { ipSystemStatsIPVersion }
+    ::= { ipSystemStatsTable 1 }
+
+IpSystemStatsEntry ::= SEQUENCE {
+        ipSystemStatsIPVersion           InetVersion,
+        ipSystemStatsInReceives          Counter32,
+        ipSystemStatsHCInReceives        Counter64,
+        ipSystemStatsInOctets            Counter32,
+        ipSystemStatsHCInOctets          Counter64,
+        ipSystemStatsInHdrErrors         Counter32,
+        ipSystemStatsInNoRoutes          Counter32,
+        ipSystemStatsInAddrErrors        Counter32,
+        ipSystemStatsInUnknownProtos     Counter32,
+        ipSystemStatsInTruncatedPkts     Counter32,
+        ipSystemStatsInForwDatagrams     Counter32,
+        ipSystemStatsHCInForwDatagrams   Counter64,
+        ipSystemStatsReasmReqds          Counter32,
+        ipSystemStatsReasmOKs            Counter32,
+        ipSystemStatsReasmFails          Counter32,
+        ipSystemStatsInDiscards          Counter32,
+        ipSystemStatsInDelivers          Counter32,
+        ipSystemStatsHCInDelivers        Counter64,
+        ipSystemStatsOutRequests         Counter32,
+        ipSystemStatsHCOutRequests       Counter64,
+        ipSystemStatsOutNoRoutes         Counter32,
+        ipSystemStatsOutForwDatagrams    Counter32,
+        ipSystemStatsHCOutForwDatagrams  Counter64,
+        ipSystemStatsOutDiscards         Counter32,
+        ipSystemStatsOutFragReqds        Counter32,
+        ipSystemStatsOutFragOKs          Counter32,
+        ipSystemStatsOutFragFails        Counter32,
+        ipSystemStatsOutFragCreates      Counter32,
+        ipSystemStatsOutTransmits        Counter32,
+        ipSystemStatsHCOutTransmits      Counter64,
+        ipSystemStatsOutOctets           Counter32,
+        ipSystemStatsHCOutOctets         Counter64,
+        ipSystemStatsInMcastPkts         Counter32,
+        ipSystemStatsHCInMcastPkts       Counter64,
+        ipSystemStatsInMcastOctets       Counter32,
+        ipSystemStatsHCInMcastOctets     Counter64,
+        ipSystemStatsOutMcastPkts        Counter32,
+        ipSystemStatsHCOutMcastPkts      Counter64,
+        ipSystemStatsOutMcastOctets      Counter32,
+        ipSystemStatsHCOutMcastOctets    Counter64,
+        ipSystemStatsInBcastPkts         Counter32,
+        ipSystemStatsHCInBcastPkts       Counter64,
+        ipSystemStatsOutBcastPkts        Counter32,
+        ipSystemStatsHCOutBcastPkts      Counter64,
+        ipSystemStatsDiscontinuityTime   TimeStamp,
+        ipSystemStatsRefreshRate         Unsigned32
+    }
+
+ipSystemStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of this row."
+    ::= { ipSystemStatsEntry 1 }
+
+-- This object ID is reserved to allow the IDs for this table's objects
+-- to align with the objects in the ipIfStatsTable.
+-- ::= { ipSystemStatsEntry 2 }
+
+ipSystemStatsInReceives OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 3 }
+
+ipSystemStatsHCInReceives OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.  This object counts the same
+            datagrams as ipSystemStatsInReceives, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 4 }
+
+ipSystemStatsInOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  Octets from datagrams
+            counted in ipSystemStatsInReceives MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 5 }
+
+ipSystemStatsHCInOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  This object counts the
+            same octets as ipSystemStatsInOctets, but allows for larger
+
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 6 }
+
+ipSystemStatsInHdrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded due to errors in
+            their IP headers, including version number mismatch, other
+            format errors, hop count exceeded, errors discovered in
+            processing their IP options, etc.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 7 }
+
+ipSystemStatsInNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because no route
+            could be found to transmit them to their destination.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 8 }
+
+ipSystemStatsInAddrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the IP
+            address in their IP header's destination field was not a
+            valid address to be received at this entity.  This count
+            includes invalid addresses (e.g., ::0).  For entities
+            that are not IP routers and therefore do not forward
+
+            datagrams, this counter includes datagrams discarded
+            because the destination address was not a local address.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 9 }
+
+ipSystemStatsInUnknownProtos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of locally-addressed IP datagrams received
+            successfully but discarded because of an unknown or
+            unsupported protocol.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 10 }
+
+ipSystemStatsInTruncatedPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the
+            datagram frame didn't carry enough data.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 11 }
+
+ipSystemStatsInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  In entities that do not act as IP routers,
+            this counter will include only those datagrams that were
+            Source-Routed via this entity, and the Source-Route
+            processing was successful.
+
+            When tracking interface statistics, the counter of the
+            incoming interface is incremented for each datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 12 }
+
+ipSystemStatsHCInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  This object counts the same packets as
+            ipSystemStatsInForwDatagrams, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 13 }
+
+ipSystemStatsReasmReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP fragments received that needed to be
+            reassembled at this interface.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 14 }
+
+ipSystemStatsReasmOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams successfully reassembled.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 15 }
+
+ipSystemStatsReasmFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of failures detected by the IP re-assembly
+            algorithm (for whatever reason: timed out, errors, etc.).
+            Note that this is not necessarily a count of discarded IP
+            fragments since some algorithms (notably the algorithm in
+            RFC 815) can lose track of the number of fragments by
+            combining them as they are received.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 16 }
+
+ipSystemStatsInDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams for which no problems were
+            encountered to prevent their continued processing, but
+            were discarded (e.g., for lack of buffer space).  Note that
+            this counter does not include any datagrams discarded while
+            awaiting re-assembly.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 17 }
+
+ipSystemStatsInDelivers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 18 }
+
+ipSystemStatsHCInDelivers OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).  This object counts the
+            same packets as ipSystemStatsInDelivers, but allows for
+            larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 19 }
+
+ipSystemStatsOutRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  Note that this counter does not include any
+            datagrams counted in ipSystemStatsOutForwDatagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 20 }
+
+ipSystemStatsHCOutRequests OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  This object counts the same packets as
+            ipSystemStatsOutRequests, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 21 }
+
+ipSystemStatsOutNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of locally generated IP datagrams discarded
+            because no route could be found to transmit them to their
+            destination.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 22 }
+
+ipSystemStatsOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  In entities
+            that do not act as IP routers, this counter will include
+            only those datagrams that were Source-Routed via this
+            entity, and the Source-Route processing was successful.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            forwarded datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 23 }
+
+ipSystemStatsHCOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  This object
+            counts the same packets as ipSystemStatsOutForwDatagrams,
+            but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 24 }
+
+ipSystemStatsOutDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output IP datagrams for which no problem was
+            encountered to prevent their transmission to their
+            destination, but were discarded (e.g., for lack of
+            buffer space).  Note that this counter would include
+
+            datagrams counted in ipSystemStatsOutForwDatagrams if any
+            such datagrams met this (discretionary) discard criterion.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 25 }
+
+ipSystemStatsOutFragReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that would require fragmentation
+            in order to be transmitted.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 26 }
+
+ipSystemStatsOutFragOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been successfully
+            fragmented.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 27 }
+
+ipSystemStatsOutFragFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been discarded because
+            they needed to be fragmented but could not be.  This
+            includes IPv4 packets that have the DF bit set and IPv6
+            packets that are being forwarded and exceed the outgoing
+            link MTU.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for an unsuccessfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 28 }
+
+ipSystemStatsOutFragCreates OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output datagram fragments that have been
+            generated as a result of IP fragmentation.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 29 }
+
+ipSystemStatsOutTransmits OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This includes
+            datagrams generated locally and those forwarded by this
+            entity.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 30 }
+
+ipSystemStatsHCOutTransmits OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This object counts
+            the same datagrams as ipSystemStatsOutTransmits, but allows
+            for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 31 }
+
+ipSystemStatsOutOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  Octets from datagrams
+            counted in ipSystemStatsOutTransmits MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 32 }
+
+ipSystemStatsHCOutOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  This objects counts the same
+            octets as ipSystemStatsOutOctets, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 33 }
+
+ipSystemStatsInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 34 }
+
+ipSystemStatsHCInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.  This object
+            counts the same datagrams as ipSystemStatsInMcastPkts but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 35 }
+
+ipSystemStatsInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+            datagrams.  Octets from datagrams counted in
+            ipSystemStatsInMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 36 }
+
+ipSystemStatsHCInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+            datagrams.  This object counts the same octets as
+            ipSystemStatsInMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 37 }
+
+ipSystemStatsOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 38 }
+
+ipSystemStatsHCOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.  This
+            object counts the same datagrams as
+            ipSystemStatsOutMcastPkts, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 39 }
+
+ipSystemStatsOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  Octets from datagrams counted in
+
+            ipSystemStatsOutMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 40 }
+
+ipSystemStatsHCOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  This object counts the same octets as
+            ipSystemStatsOutMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 41 }
+
+ipSystemStatsInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 42 }
+
+ipSystemStatsHCInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.  This object
+            counts the same datagrams as ipSystemStatsInBcastPkts but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 43 }
+
+ipSystemStatsOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 44 }
+
+ipSystemStatsHCOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.  This
+            object counts the same datagrams as
+            ipSystemStatsOutBcastPkts, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipSystemStatsDiscontinuityTime."
+    ::= { ipSystemStatsEntry 45 }
+
+ipSystemStatsDiscontinuityTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            any one or more of this entry's counters suffered a
+            discontinuity.
+
+            If no such discontinuities have occurred since the last re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ipSystemStatsEntry 46 }
+
+ipSystemStatsRefreshRate OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milli-seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The minimum reasonable polling interval for this entry.
+            This object provides an indication of the minimum amount of
+            time required to update the counters in this entry."
+    ::= { ipSystemStatsEntry 47 }
+
+ipIfStatsTableLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+            a row in the ipIfStatsTable was added or deleted.
+
+            If new objects are added to the ipIfStatsTable that require
+            the ipIfStatsTableLastChange to be updated when they are
+            modified, they must specify that requirement in their
+            description clause."
+    ::= { ipTrafficStats 2 }
+
+ipIfStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpIfStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing per-interface traffic statistics.  This
+            table and the ipSystemStatsTable contain similar objects
+            whose difference is in their granularity.  Where this table
+            contains per-interface statistics, the ipSystemStatsTable
+            contains the same statistics, but counted on a system wide
+            basis."
+    ::= { ipTrafficStats 3 }
+
+ipIfStatsEntry OBJECT-TYPE
+    SYNTAX     IpIfStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An interface statistics entry containing objects for a
+            particular interface and version of IP."
+    INDEX { ipIfStatsIPVersion, ipIfStatsIfIndex }
+    ::= { ipIfStatsTable 1 }
+
+IpIfStatsEntry ::= SEQUENCE {
+        ipIfStatsIPVersion           InetVersion,
+        ipIfStatsIfIndex             InterfaceIndex,
+        ipIfStatsInReceives          Counter32,
+        ipIfStatsHCInReceives        Counter64,
+        ipIfStatsInOctets            Counter32,
+        ipIfStatsHCInOctets          Counter64,
+        ipIfStatsInHdrErrors         Counter32,
+        ipIfStatsInNoRoutes          Counter32,
+        ipIfStatsInAddrErrors        Counter32,
+        ipIfStatsInUnknownProtos     Counter32,
+        ipIfStatsInTruncatedPkts     Counter32,
+        ipIfStatsInForwDatagrams     Counter32,
+        ipIfStatsHCInForwDatagrams   Counter64,
+        ipIfStatsReasmReqds          Counter32,
+        ipIfStatsReasmOKs            Counter32,
+        ipIfStatsReasmFails          Counter32,
+        ipIfStatsInDiscards          Counter32,
+        ipIfStatsInDelivers          Counter32,
+        ipIfStatsHCInDelivers        Counter64,
+        ipIfStatsOutRequests         Counter32,
+        ipIfStatsHCOutRequests       Counter64,
+        ipIfStatsOutForwDatagrams    Counter32,
+        ipIfStatsHCOutForwDatagrams  Counter64,
+        ipIfStatsOutDiscards         Counter32,
+        ipIfStatsOutFragReqds        Counter32,
+        ipIfStatsOutFragOKs          Counter32,
+        ipIfStatsOutFragFails        Counter32,
+        ipIfStatsOutFragCreates      Counter32,
+        ipIfStatsOutTransmits        Counter32,
+        ipIfStatsHCOutTransmits      Counter64,
+        ipIfStatsOutOctets           Counter32,
+        ipIfStatsHCOutOctets         Counter64,
+        ipIfStatsInMcastPkts         Counter32,
+        ipIfStatsHCInMcastPkts       Counter64,
+        ipIfStatsInMcastOctets       Counter32,
+        ipIfStatsHCInMcastOctets     Counter64,
+        ipIfStatsOutMcastPkts        Counter32,
+        ipIfStatsHCOutMcastPkts      Counter64,
+        ipIfStatsOutMcastOctets      Counter32,
+        ipIfStatsHCOutMcastOctets    Counter64,
+        ipIfStatsInBcastPkts         Counter32,
+        ipIfStatsHCInBcastPkts       Counter64,
+        ipIfStatsOutBcastPkts        Counter32,
+        ipIfStatsHCOutBcastPkts      Counter64,
+        ipIfStatsDiscontinuityTime   TimeStamp,
+        ipIfStatsRefreshRate         Unsigned32
+    }
+
+ipIfStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of this row."
+    ::= { ipIfStatsEntry 1 }
+
+ipIfStatsIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipIfStatsEntry 2 }
+
+ipIfStatsInReceives OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 3 }
+
+ipIfStatsHCInReceives OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of input IP datagrams received, including
+            those received in error.  This object counts the same
+            datagrams as ipIfStatsInReceives, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 4 }
+
+ipIfStatsInOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  Octets from datagrams
+            counted in ipIfStatsInReceives MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 5 }
+
+ipIfStatsHCInOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in input IP datagrams,
+            including those received in error.  This object counts the
+            same octets as ipIfStatsInOctets, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 6 }
+
+ipIfStatsInHdrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded due to errors in
+            their IP headers, including version number mismatch, other
+            format errors, hop count exceeded, errors discovered in
+            processing their IP options, etc.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 7 }
+
+ipIfStatsInNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because no route
+            could be found to transmit them to their destination.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 8 }
+
+ipIfStatsInAddrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the IP
+            address in their IP header's destination field was not a
+            valid address to be received at this entity.  This count
+            includes invalid addresses (e.g., ::0).  For entities that
+            are not IP routers and therefore do not forward datagrams,
+            this counter includes datagrams discarded because the
+            destination address was not a local address.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 9 }
+
+ipIfStatsInUnknownProtos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of locally-addressed IP datagrams received
+            successfully but discarded because of an unknown or
+            unsupported protocol.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 10 }
+
+ipIfStatsInTruncatedPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams discarded because the
+            datagram frame didn't carry enough data.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 11 }
+
+ipIfStatsInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  In entities that do not act as IP routers,
+            this counter will include only those datagrams that were
+            Source-Routed via this entity, and the Source-Route
+            processing was successful.
+
+            When tracking interface statistics, the counter of the
+            incoming interface is incremented for each datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 12 }
+
+ipIfStatsHCInForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IP destination and for which this entity
+            attempted to find a route to forward them to that final
+            destination.  This object counts the same packets as
+
+            ipIfStatsInForwDatagrams, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 13 }
+
+ipIfStatsReasmReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP fragments received that needed to be
+            reassembled at this interface.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 14 }
+
+ipIfStatsReasmOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams successfully reassembled.
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 15 }
+
+ipIfStatsReasmFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of failures detected by the IP re-assembly
+            algorithm (for whatever reason: timed out, errors, etc.).
+            Note that this is not necessarily a count of discarded IP
+            fragments since some algorithms (notably the algorithm in
+            RFC 815) can lose track of the number of fragments by
+            combining them as they are received.
+
+            When tracking interface statistics, the counter of the
+            interface to which these fragments were addressed is
+            incremented.  This interface might not be the same as the
+            input interface for some of the fragments.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 16 }
+
+ipIfStatsInDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input IP datagrams for which no problems were
+            encountered to prevent their continued processing, but
+            were discarded (e.g., for lack of buffer space).  Note that
+            this counter does not include any datagrams discarded while
+            awaiting re-assembly.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 17 }
+
+ipIfStatsInDelivers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).
+
+            When tracking interface statistics, the counter of the
+            interface to which these datagrams were addressed is
+            incremented.  This interface might not be the same as the
+
+            input interface for some of the datagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 18 }
+
+ipIfStatsHCInDelivers OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of datagrams successfully delivered to IP
+            user-protocols (including ICMP).  This object counts the
+            same packets as ipIfStatsInDelivers, but allows for larger
+            values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 19 }
+
+ipIfStatsOutRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  Note that this counter does not include any
+            datagrams counted in ipIfStatsOutForwDatagrams.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 20 }
+
+ipIfStatsHCOutRequests OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that local IP user-
+            protocols (including ICMP) supplied to IP in requests for
+            transmission.  This object counts the same packets as
+
+            ipIfStatsOutRequests, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 21 }
+
+-- This object ID is reserved to allow the IDs for this table's objects
+-- to align with the objects in the ipSystemStatsTable.
+-- ::= {ipIfStatsEntry 22}
+
+ipIfStatsOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  In entities
+            that do not act as IP routers, this counter will include
+            only those datagrams that were Source-Routed via this
+            entity, and the Source-Route processing was successful.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            forwarded datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 23 }
+
+ipIfStatsHCOutForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of datagrams for which this entity was not their
+            final IP destination and for which it was successful in
+            finding a path to their final destination.  This object
+            counts the same packets as ipIfStatsOutForwDatagrams, but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 24 }
+
+ipIfStatsOutDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output IP datagrams for which no problem was
+            encountered to prevent their transmission to their
+            destination, but were discarded (e.g., for lack of
+            buffer space).  Note that this counter would include
+            datagrams counted in ipIfStatsOutForwDatagrams if any such
+            datagrams met this (discretionary) discard criterion.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 25 }
+
+ipIfStatsOutFragReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that would require fragmentation
+            in order to be transmitted.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 26 }
+
+ipIfStatsOutFragOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been successfully
+            fragmented.
+
+            When tracking interface statistics, the counter of the
+
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 27 }
+
+ipIfStatsOutFragFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP datagrams that have been discarded because
+            they needed to be fragmented but could not be.  This
+            includes IPv4 packets that have the DF bit set and IPv6
+            packets that are being forwarded and exceed the outgoing
+            link MTU.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for an unsuccessfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 28 }
+
+ipIfStatsOutFragCreates OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output datagram fragments that have been
+            generated as a result of IP fragmentation.
+
+            When tracking interface statistics, the counter of the
+            outgoing interface is incremented for a successfully
+            fragmented datagram.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 29 }
+
+ipIfStatsOutTransmits OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This includes
+            datagrams generated locally and those forwarded by this
+            entity.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 30 }
+
+ipIfStatsHCOutTransmits OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of IP datagrams that this entity supplied
+            to the lower layers for transmission.  This object counts
+            the same datagrams as ipIfStatsOutTransmits, but allows for
+            larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 31 }
+
+ipIfStatsOutOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  Octets from datagrams
+            counted in ipIfStatsOutTransmits MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 32 }
+
+ipIfStatsHCOutOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets in IP datagrams delivered to the
+            lower layers for transmission.  This objects counts the same
+            octets as ipIfStatsOutOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 33 }
+
+ipIfStatsInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 34 }
+
+ipIfStatsHCInMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams received.  This object
+            counts the same datagrams as ipIfStatsInMcastPkts, but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 35 }
+
+ipIfStatsInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+
+            datagrams.  Octets from datagrams counted in
+            ipIfStatsInMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 36 }
+
+ipIfStatsHCInMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets received in IP multicast
+            datagrams.  This object counts the same octets as
+            ipIfStatsInMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 37 }
+
+ipIfStatsOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 38 }
+
+ipIfStatsHCOutMcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP multicast datagrams transmitted.  This
+            object counts the same datagrams as ipIfStatsOutMcastPkts,
+            but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 39 }
+
+ipIfStatsOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  Octets from datagrams counted in
+            ipIfStatsOutMcastPkts MUST be counted here.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 40 }
+
+ipIfStatsHCOutMcastOctets OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of octets transmitted in IP multicast
+            datagrams.  This object counts the same octets as
+            ipIfStatsOutMcastOctets, but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 41 }
+
+ipIfStatsInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 42 }
+
+ipIfStatsHCInBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams received.  This object
+            counts the same datagrams as ipIfStatsInBcastPkts, but
+            allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 43 }
+
+ipIfStatsOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 44 }
+
+ipIfStatsHCOutBcastPkts OBJECT-TYPE
+    SYNTAX     Counter64
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of IP broadcast datagrams transmitted.  This
+            object counts the same datagrams as ipIfStatsOutBcastPkts,
+            but allows for larger values.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ipIfStatsDiscontinuityTime."
+    ::= { ipIfStatsEntry 45 }
+
+ipIfStatsDiscontinuityTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime on the most recent occasion at which
+
+            any one or more of this entry's counters suffered a
+            discontinuity.
+
+            If no such discontinuities have occurred since the last re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ipIfStatsEntry 46 }
+
+ipIfStatsRefreshRate OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS "milli-seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The minimum reasonable polling interval for this entry.
+            This object provides an indication of the minimum amount of
+            time required to update the counters in this entry."
+    ::= { ipIfStatsEntry 47 }
+
+--
+-- Internet Address Prefix table
+--
+
+ipAddressPrefixTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpAddressPrefixEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table allows the user to determine the source of an IP
+            address or set of IP addresses, and allows other tables to
+            share the information via pointer rather than by copying.
+
+            For example, when the node configures both a unicast and
+            anycast address for a prefix, the ipAddressPrefix objects
+            for those addresses will point to a single row in this
+            table.
+
+            This table primarily provides support for IPv6 prefixes, and
+            several of the objects are less meaningful for IPv4.  The
+            table continues to allow IPv4 addresses to allow future
+            flexibility.  In order to promote a common configuration,
+            this document includes suggestions for default values for
+            IPv4 prefixes.  Each of these values may be overridden if an
+            object is meaningful to the node.
+
+            All prefixes used by this entity should be included in this
+            table independent of how the entity learned the prefix.
+            (This table isn't limited to prefixes learned from router
+
+            advertisements.)"
+    ::= { ip 32 }
+
+ipAddressPrefixEntry OBJECT-TYPE
+    SYNTAX     IpAddressPrefixEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry in the ipAddressPrefixTable."
+    INDEX    { ipAddressPrefixIfIndex, ipAddressPrefixType,
+               ipAddressPrefixPrefix, ipAddressPrefixLength }
+    ::= { ipAddressPrefixTable 1 }
+
+IpAddressPrefixEntry ::= SEQUENCE {
+        ipAddressPrefixIfIndex               InterfaceIndex,
+        ipAddressPrefixType                  InetAddressType,
+        ipAddressPrefixPrefix                InetAddress,
+        ipAddressPrefixLength                InetAddressPrefixLength,
+        ipAddressPrefixOrigin                IpAddressPrefixOriginTC,
+        ipAddressPrefixOnLinkFlag            TruthValue,
+        ipAddressPrefixAutonomousFlag        TruthValue,
+        ipAddressPrefixAdvPreferredLifetime  Unsigned32,
+        ipAddressPrefixAdvValidLifetime      Unsigned32
+    }
+
+ipAddressPrefixIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface on
+            which this prefix is configured.  The interface identified
+            by a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipAddressPrefixEntry 1 }
+
+ipAddressPrefixType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of ipAddressPrefix."
+    ::= { ipAddressPrefixEntry 2 }
+
+ipAddressPrefixPrefix OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address prefix.  The address type of this object is
+            specified in ipAddressPrefixType.  The length of this object
+            is the standard length for objects of that type (4 or 16
+            bytes).  Any bits after ipAddressPrefixLength must be zero.
+
+            Implementors need to be aware that, if the size of
+            ipAddressPrefixPrefix exceeds 114 octets, then OIDS of
+            instances of columns in this row will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    ::= { ipAddressPrefixEntry 3 }
+
+ipAddressPrefixLength OBJECT-TYPE
+    SYNTAX     InetAddressPrefixLength
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The prefix length associated with this prefix.
+
+            The value 0 has no special meaning for this object.  It
+            simply refers to address '::/0'."
+    ::= { ipAddressPrefixEntry 4 }
+
+ipAddressPrefixOrigin OBJECT-TYPE
+    SYNTAX     IpAddressPrefixOriginTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The origin of this prefix."
+    ::= { ipAddressPrefixEntry 5 }
+
+ipAddressPrefixOnLinkFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "This object has the value 'true(1)', if this prefix can be
+            used for on-link determination; otherwise, the value is
+            'false(2)'.
+
+            The default for IPv4 prefixes is 'true(1)'."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 6 }
+
+ipAddressPrefixAutonomousFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "Autonomous address configuration flag.  When true(1),
+            indicates that this prefix can be used for autonomous
+            address configuration (i.e., can be used to form a local
+            interface address).  If false(2), it is not used to auto-
+            configure a local interface address.
+
+            The default for IPv4 prefixes is 'false(2)'."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 7 }
+
+ipAddressPrefixAdvPreferredLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The remaining length of time, in seconds, that this prefix
+            will continue to be preferred, i.e., time until deprecation.
+
+            A value of 4,294,967,295 represents infinity.
+
+            The address generated from a deprecated prefix should no
+            longer be used as a source address in new communications,
+            but packets received on such an interface are processed as
+            expected.
+
+            The default for IPv4 prefixes is 4,294,967,295 (infinity)."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 8 }
+
+ipAddressPrefixAdvValidLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The remaining length of time, in seconds, that this prefix
+            will continue to be valid, i.e., time until invalidation.  A
+            value of 4,294,967,295 represents infinity.
+
+            The address generated from an invalidated prefix should not
+            appear as the destination or source address of a packet.
+
+            The default for IPv4 prefixes is 4,294,967,295 (infinity)."
+    REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and
+               RFC 2462"
+    ::= { ipAddressPrefixEntry 9 }
+
+--
+-- Internet Address Table
+--
+
+ipAddressSpinLock OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "An advisory lock used to allow cooperating SNMP managers to
+            coordinate their use of the set operation in creating or
+            modifying rows within this table.
+
+            In order to use this lock to coordinate the use of set
+            operations, managers should first retrieve
+            ipAddressTableSpinLock.  They should then determine the
+            appropriate row to create or modify.  Finally, they should
+            issue the appropriate set command, including the retrieved
+            value of ipAddressSpinLock.  If another manager has altered
+            the table in the meantime, then the value of
+            ipAddressSpinLock will have changed, and the creation will
+            fail as it will be specifying an incorrect value for
+            ipAddressSpinLock.  It is suggested, but not required, that
+            the ipAddressSpinLock be the first var bind for each set of
+            objects representing a 'row' in a PDU."
+    ::= { ip 33 }
+
+ipAddressTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "This table contains addressing information relevant to the
+            entity's interfaces.
+
+            This table does not contain multicast address information.
+            Tables for such information should be contained in multicast
+            specific MIBs, such as RFC 3019.
+
+            While this table is writable, the user will note that
+            several objects, such as ipAddressOrigin, are not.  The
+            intention in allowing a user to write to this table is to
+            allow them to add or remove any entry that isn't
+
+            permanent.  The user should be allowed to modify objects
+            and entries when that would not cause inconsistencies
+            within the table.  Allowing write access to objects, such
+            as ipAddressOrigin, could allow a user to insert an entry
+            and then label it incorrectly.
+
+            Note well: When including IPv6 link-local addresses in this
+            table, the entry must use an InetAddressType of 'ipv6z' in
+            order to differentiate between the possible interfaces."
+    ::= { ip 34 }
+
+ipAddressEntry OBJECT-TYPE
+    SYNTAX     IpAddressEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An address mapping for a particular interface."
+    INDEX { ipAddressAddrType, ipAddressAddr }
+    ::= { ipAddressTable 1 }
+
+IpAddressEntry ::= SEQUENCE {
+        ipAddressAddrType     InetAddressType,
+        ipAddressAddr         InetAddress,
+        ipAddressIfIndex      InterfaceIndex,
+        ipAddressType         INTEGER,
+        ipAddressPrefix       RowPointer,
+        ipAddressOrigin       IpAddressOriginTC,
+        ipAddressStatus       IpAddressStatusTC,
+        ipAddressCreated      TimeStamp,
+        ipAddressLastChanged  TimeStamp,
+        ipAddressRowStatus    RowStatus,
+        ipAddressStorageType  StorageType
+    }
+
+ipAddressAddrType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type of ipAddressAddr."
+    ::= { ipAddressEntry 1 }
+
+ipAddressAddr OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP address to which this entry's addressing information
+
+            pertains.  The address type of this object is specified in
+            ipAddressAddrType.
+
+            Implementors need to be aware that if the size of
+            ipAddressAddr exceeds 116 octets, then OIDS of instances of
+            columns in this row will have more than 128 sub-identifiers
+            and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
+    ::= { ipAddressEntry 2 }
+
+ipAddressIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipAddressEntry 3 }
+
+ipAddressType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                 unicast(1),
+                 anycast(2),
+                 broadcast(3)
+    }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The type of address.  broadcast(3) is not a valid value for
+            IPv6 addresses (RFC 3513)."
+    DEFVAL { unicast }
+    ::= { ipAddressEntry 4 }
+
+ipAddressPrefix OBJECT-TYPE
+    SYNTAX     RowPointer
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "A pointer to the row in the prefix table to which this
+            address belongs.  May be { 0 0 } if there is no such row."
+    DEFVAL { zeroDotZero }
+    ::= { ipAddressEntry 5 }
+
+ipAddressOrigin OBJECT-TYPE
+    SYNTAX     IpAddressOriginTC
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The origin of the address."
+    ::= { ipAddressEntry 6 }
+
+ipAddressStatus OBJECT-TYPE
+    SYNTAX     IpAddressStatusTC
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of the address, describing if the address can be
+            used for communication.
+
+            In the absence of other information, an IPv4 address is
+            always preferred(1)."
+    DEFVAL { preferred }
+    ::= { ipAddressEntry 7 }
+
+ipAddressCreated OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the time this entry was created.
+            If this entry was created prior to the last re-
+            initialization of the local network management subsystem,
+            then this object contains a zero value."
+    ::= { ipAddressEntry 8 }
+
+ipAddressLastChanged OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the time this entry was last
+            updated.  If this entry was updated prior to the last re-
+            initialization of the local network management subsystem,
+            then this object contains a zero value."
+    ::= { ipAddressEntry 9 }
+
+ipAddressRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+            The RowStatus TC requires that this DESCRIPTION clause
+            states under which circumstances other objects in this row
+
+            can be modified.  The value of this object has no effect on
+            whether other objects in this conceptual row can be
+            modified.
+
+            A conceptual row can not be made active until the
+            ipAddressIfIndex has been set to a valid index."
+    ::= { ipAddressEntry 10 }
+
+ipAddressStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The storage type for this conceptual row.  If this object
+            has a value of 'permanent', then no other objects are
+            required to be able to be modified."
+    DEFVAL { volatile }
+    ::= { ipAddressEntry 11 }
+
+--
+-- the Internet Address Translation table
+--
+
+ipNetToPhysicalTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpNetToPhysicalEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP Address Translation table used for mapping from IP
+            addresses to physical addresses.
+
+            The Address Translation tables contain the IP address to
+            'physical' address equivalences.  Some interfaces do not use
+            translation tables for determining address equivalences
+            (e.g., DDN-X.25 has an algorithmic method); if all
+            interfaces are of this type, then the Address Translation
+            table is empty, i.e., has zero entries.
+
+            While many protocols may be used to populate this table, ARP
+            and Neighbor Discovery are the most likely
+            options."
+    REFERENCE "RFC 826 and RFC 2461"
+    ::= { ip 35 }
+
+ipNetToPhysicalEntry OBJECT-TYPE
+    SYNTAX     IpNetToPhysicalEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Each entry contains one IP address to `physical' address
+            equivalence."
+    INDEX       { ipNetToPhysicalIfIndex,
+                  ipNetToPhysicalNetAddressType,
+                  ipNetToPhysicalNetAddress }
+    ::= { ipNetToPhysicalTable 1 }
+
+IpNetToPhysicalEntry ::= SEQUENCE {
+        ipNetToPhysicalIfIndex         InterfaceIndex,
+        ipNetToPhysicalNetAddressType  InetAddressType,
+        ipNetToPhysicalNetAddress      InetAddress,
+        ipNetToPhysicalPhysAddress     PhysAddress,
+        ipNetToPhysicalLastUpdated     TimeStamp,
+        ipNetToPhysicalType            INTEGER,
+        ipNetToPhysicalState           INTEGER,
+        ipNetToPhysicalRowStatus       RowStatus
+    }
+
+ipNetToPhysicalIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipNetToPhysicalEntry 1 }
+
+ipNetToPhysicalNetAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The type of ipNetToPhysicalNetAddress."
+    ::= { ipNetToPhysicalEntry 2 }
+
+ipNetToPhysicalNetAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP Address corresponding to the media-dependent
+            `physical' address.  The address type of this object is
+            specified in ipNetToPhysicalAddressType.
+
+            Implementors need to be aware that if the size of
+
+            ipNetToPhysicalNetAddress exceeds 115 octets, then OIDS of
+            instances of columns in this row will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    ::= { ipNetToPhysicalEntry 3 }
+
+ipNetToPhysicalPhysAddress OBJECT-TYPE
+    SYNTAX     PhysAddress (SIZE(0..65535))
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The media-dependent `physical' address.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity SHOULD NOT save the
+            change to non-volatile storage."
+    ::= { ipNetToPhysicalEntry 4 }
+
+ipNetToPhysicalLastUpdated OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The value of sysUpTime at the time this entry was last
+            updated.  If this entry was updated prior to the last re-
+            initialization of the local network management subsystem,
+            then this object contains a zero value."
+    ::= { ipNetToPhysicalEntry 5 }
+
+ipNetToPhysicalType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other(1),        -- none of the following
+                invalid(2),      -- an invalidated mapping
+                dynamic(3),
+                static(4),
+                local(5)         -- local interface
+            }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The type of mapping.
+
+            Setting this object to the value invalid(2) has the effect
+            of invalidating the corresponding entry in the
+            ipNetToPhysicalTable.  That is, it effectively dis-
+            associates the interface identified with said entry from the
+            mapping identified with said entry.  It is an
+            implementation-specific matter as to whether the agent
+
+            removes an invalidated entry from the table.  Accordingly,
+            management stations must be prepared to receive tabular
+            information from agents that corresponds to entries not
+            currently in use.  Proper interpretation of such entries
+            requires examination of the relevant ipNetToPhysicalType
+            object.
+
+            The 'dynamic(3)' type indicates that the IP address to
+            physical addresses mapping has been dynamically resolved
+            using e.g., IPv4 ARP or the IPv6 Neighbor Discovery
+            protocol.
+
+            The 'static(4)' type indicates that the mapping has been
+            statically configured.  Both of these refer to entries that
+            provide mappings for other entities addresses.
+
+            The 'local(5)' type indicates that the mapping is provided
+            for an entity's own interface address.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity SHOULD NOT save the
+            change to non-volatile storage."
+    DEFVAL { static }
+    ::= { ipNetToPhysicalEntry 6 }
+
+ipNetToPhysicalState OBJECT-TYPE
+    SYNTAX     INTEGER {
+                     reachable(1), -- confirmed reachability
+
+                     stale(2),     -- unconfirmed reachability
+
+                     delay(3),     -- waiting for reachability
+                                   -- confirmation before entering
+                                   -- the probe state
+
+                     probe(4),     -- actively probing
+
+                     invalid(5),   -- an invalidated mapping
+
+                     unknown(6),   -- state can not be determined
+                                   -- for some reason.
+
+                     incomplete(7) -- address resolution is being
+                                   -- performed.
+                    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The Neighbor Unreachability Detection state for the
+            interface when the address mapping in this entry is used.
+            If Neighbor Unreachability Detection is not in use (e.g. for
+            IPv4), this object is always unknown(6)."
+    REFERENCE "RFC 2461"
+    ::= { ipNetToPhysicalEntry 7 }
+
+ipNetToPhysicalRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+            The RowStatus TC requires that this DESCRIPTION clause
+            states under which circumstances other objects in this row
+            can be modified.  The value of this object has no effect on
+            whether other objects in this conceptual row can be
+            modified.
+
+            A conceptual row can not be made active until the
+            ipNetToPhysicalPhysAddress object has been set.
+
+            Note that if the ipNetToPhysicalType is set to 'invalid',
+            the managed node may delete the entry independent of the
+            state of this object."
+    ::= { ipNetToPhysicalEntry 8 }
+
+--
+-- The IPv6 Scope Zone Index Table.
+--
+
+ipv6ScopeZoneIndexTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv6ScopeZoneIndexEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table used to describe IPv6 unicast and multicast scope
+            zones.
+
+            For those objects that have names rather than numbers, the
+            names were chosen to coincide with the names used in the
+            IPv6 address architecture document. "
+    REFERENCE "Section 2.7 of RFC 4291"
+    ::= { ip 36 }
+
+ipv6ScopeZoneIndexEntry OBJECT-TYPE
+    SYNTAX     Ipv6ScopeZoneIndexEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Each entry contains the list of scope identifiers on a given
+            interface."
+    INDEX { ipv6ScopeZoneIndexIfIndex }
+    ::= { ipv6ScopeZoneIndexTable 1 }
+
+Ipv6ScopeZoneIndexEntry ::= SEQUENCE {
+        ipv6ScopeZoneIndexIfIndex            InterfaceIndex,
+        ipv6ScopeZoneIndexLinkLocal          InetZoneIndex,
+        ipv6ScopeZoneIndex3                  InetZoneIndex,
+        ipv6ScopeZoneIndexAdminLocal         InetZoneIndex,
+        ipv6ScopeZoneIndexSiteLocal          InetZoneIndex,
+        ipv6ScopeZoneIndex6                  InetZoneIndex,
+        ipv6ScopeZoneIndex7                  InetZoneIndex,
+        ipv6ScopeZoneIndexOrganizationLocal  InetZoneIndex,
+        ipv6ScopeZoneIndex9                  InetZoneIndex,
+        ipv6ScopeZoneIndexA                  InetZoneIndex,
+        ipv6ScopeZoneIndexB                  InetZoneIndex,
+        ipv6ScopeZoneIndexC                  InetZoneIndex,
+        ipv6ScopeZoneIndexD                  InetZoneIndex
+    }
+
+ipv6ScopeZoneIndexIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface to
+            which these scopes belong.  The interface identified by a
+            particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv6ScopeZoneIndexEntry 1 }
+
+ipv6ScopeZoneIndexLinkLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the link-local scope on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 2 }
+
+ipv6ScopeZoneIndex3 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 3 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 3 }
+
+ipv6ScopeZoneIndexAdminLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the admin-local scope on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 4 }
+
+ipv6ScopeZoneIndexSiteLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the site-local scope on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 5 }
+
+ipv6ScopeZoneIndex6 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 6 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 6 }
+
+ipv6ScopeZoneIndex7 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 7 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 7 }
+
+ipv6ScopeZoneIndexOrganizationLocal OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for the organization-local scope on this
+            interface."
+    ::= { ipv6ScopeZoneIndexEntry 8 }
+
+ipv6ScopeZoneIndex9 OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope 9 on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 9 }
+
+ipv6ScopeZoneIndexA OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope A on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 10 }
+
+ipv6ScopeZoneIndexB OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope B on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 11 }
+
+ipv6ScopeZoneIndexC OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope C on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 12 }
+
+ipv6ScopeZoneIndexD OBJECT-TYPE
+    SYNTAX     InetZoneIndex
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The zone index for scope D on this interface."
+    ::= { ipv6ScopeZoneIndexEntry 13 }
+
+--
+-- The Default Router Table
+-- This table simply lists the default routers; for more information
+-- about routing tables, see the routing MIBs
+--
+
+ipDefaultRouterTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpDefaultRouterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table used to describe the default routers known to this
+
+            entity."
+    ::= { ip 37 }
+
+ipDefaultRouterEntry OBJECT-TYPE
+    SYNTAX     IpDefaultRouterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "Each entry contains information about a default router known
+            to this entity."
+    INDEX {ipDefaultRouterAddressType, ipDefaultRouterAddress,
+           ipDefaultRouterIfIndex}
+    ::= { ipDefaultRouterTable 1 }
+
+IpDefaultRouterEntry ::= SEQUENCE {
+        ipDefaultRouterAddressType  InetAddressType,
+        ipDefaultRouterAddress      InetAddress,
+        ipDefaultRouterIfIndex      InterfaceIndex,
+        ipDefaultRouterLifetime     Unsigned32,
+        ipDefaultRouterPreference   INTEGER
+    }
+
+ipDefaultRouterAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The address type for this row."
+    ::= { ipDefaultRouterEntry 1 }
+
+ipDefaultRouterAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP address of the default router represented by this
+            row.  The address type of this object is specified in
+            ipDefaultRouterAddressType.
+
+            Implementers need to be aware that if the size of
+            ipDefaultRouterAddress exceeds 115 octets, then OIDS of
+            instances of columns in this row will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3."
+    ::= { ipDefaultRouterEntry 2 }
+
+ipDefaultRouterIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface by
+            which the router can be reached.  The interface identified
+            by a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipDefaultRouterEntry 3 }
+
+ipDefaultRouterLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..65535)
+    UNITS      "seconds"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The remaining length of time, in seconds, that this router
+            will continue to be useful as a default router.  A value of
+            zero indicates that it is no longer useful as a default
+            router.  It is left to the implementer of the MIB as to
+            whether a router with a lifetime of zero is removed from the
+            list.
+
+            For IPv6, this value should be extracted from the router
+            advertisement messages."
+    REFERENCE "For IPv6 RFC 2462 sections 4.2 and 6.3.4"
+    ::= { ipDefaultRouterEntry 4 }
+
+ipDefaultRouterPreference OBJECT-TYPE
+    SYNTAX     INTEGER {
+                     reserved (-2),
+                     low (-1),
+                     medium (0),
+                     high (1)
+                    }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "An indication of preference given to this router as a
+            default router as described in he Default Router
+            Preferences document.  Treating the value as a
+            2 bit signed integer allows for simple arithmetic
+            comparisons.
+
+            For IPv4 routers or IPv6 routers that are not using the
+            updated router advertisement format, this object is set to
+            medium (0)."
+    REFERENCE "RFC 4291, section 2.1"
+    ::= { ipDefaultRouterEntry 5 }
+
+--
+-- Configuration information for constructing router advertisements
+--
+
+ipv6RouterAdvertSpinLock OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+           "An advisory lock used to allow cooperating SNMP managers to
+            coordinate their use of the set operation in creating or
+            modifying rows within this table.
+
+            In order to use this lock to coordinate the use of set
+            operations, managers should first retrieve
+            ipv6RouterAdvertSpinLock.  They should then determine the
+            appropriate row to create or modify.  Finally, they should
+            issue the appropriate set command including the retrieved
+            value of ipv6RouterAdvertSpinLock.  If another manager has
+            altered the table in the meantime, then the value of
+            ipv6RouterAdvertSpinLock will have changed and the creation
+            will fail as it will be specifying an incorrect value for
+            ipv6RouterAdvertSpinLock.  It is suggested, but not
+            required, that the ipv6RouterAdvertSpinLock be the first var
+            bind for each set of objects representing a 'row' in a PDU."
+    ::= { ip 38 }
+
+ipv6RouterAdvertTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF Ipv6RouterAdvertEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table containing information used to construct router
+            advertisements."
+    ::= { ip 39 }
+
+ipv6RouterAdvertEntry OBJECT-TYPE
+    SYNTAX     Ipv6RouterAdvertEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "An entry containing information used to construct router
+            advertisements.
+
+            Information in this table is persistent, and when this
+            object is written, the entity SHOULD save the change to
+            non-volatile storage."
+    INDEX { ipv6RouterAdvertIfIndex }
+    ::= { ipv6RouterAdvertTable 1 }
+
+Ipv6RouterAdvertEntry ::= SEQUENCE {
+        ipv6RouterAdvertIfIndex          InterfaceIndex,
+        ipv6RouterAdvertSendAdverts      TruthValue,
+        ipv6RouterAdvertMaxInterval      Unsigned32,
+        ipv6RouterAdvertMinInterval      Unsigned32,
+        ipv6RouterAdvertManagedFlag      TruthValue,
+        ipv6RouterAdvertOtherConfigFlag  TruthValue,
+        ipv6RouterAdvertLinkMTU          Unsigned32,
+        ipv6RouterAdvertReachableTime    Unsigned32,
+        ipv6RouterAdvertRetransmitTime   Unsigned32,
+        ipv6RouterAdvertCurHopLimit      Unsigned32,
+        ipv6RouterAdvertDefaultLifetime  Unsigned32,
+        ipv6RouterAdvertRowStatus        RowStatus
+    }
+
+ipv6RouterAdvertIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndex
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The index value that uniquely identifies the interface on
+            which router advertisements constructed with this
+            information will be transmitted.  The interface identified
+            by a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipv6RouterAdvertEntry 1 }
+
+ipv6RouterAdvertSendAdverts OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "A flag indicating whether the router sends periodic
+            router advertisements and responds to router solicitations
+            on this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { false }
+    ::= { ipv6RouterAdvertEntry 2 }
+
+ipv6RouterAdvertMaxInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (4..1800)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The maximum time allowed between sending unsolicited router
+
+            advertisements from this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 600 }
+    ::= { ipv6RouterAdvertEntry 3 }
+
+ipv6RouterAdvertMinInterval OBJECT-TYPE
+    SYNTAX     Unsigned32 (3..1350)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The minimum time allowed between sending unsolicited router
+            advertisements from this interface.
+
+            The default is 0.33 * ipv6RouterAdvertMaxInterval, however,
+            in the case of a low value for ipv6RouterAdvertMaxInterval,
+            the minimum value for this object is restricted to 3."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    ::= { ipv6RouterAdvertEntry 4 }
+
+ipv6RouterAdvertManagedFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The true/false value to be placed into the 'managed address
+            configuration' flag field in router advertisements sent from
+            this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { false }
+    ::= { ipv6RouterAdvertEntry 5 }
+
+ipv6RouterAdvertOtherConfigFlag OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The true/false value to be placed into the 'other stateful
+            configuration' flag field in router advertisements sent from
+            this interface."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { false }
+    ::= { ipv6RouterAdvertEntry 6 }
+
+ipv6RouterAdvertLinkMTU OBJECT-TYPE
+    SYNTAX     Unsigned32
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in MTU options sent by the router on
+            this interface.
+
+            A value of zero indicates that no MTU options are sent."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 0 }
+    ::= { ipv6RouterAdvertEntry 7 }
+
+ipv6RouterAdvertReachableTime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..3600000)
+    UNITS      "milliseconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in the reachable time field in router
+            advertisement messages sent from this interface.
+
+            A value of zero in the router advertisement indicates that
+            the advertisement isn't specifying a value for reachable
+            time."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 0 }
+    ::= { ipv6RouterAdvertEntry 8 }
+
+ipv6RouterAdvertRetransmitTime OBJECT-TYPE
+    SYNTAX     Unsigned32
+    UNITS      "milliseconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in the retransmit timer field in
+            router advertisements sent from this interface.
+
+            A value of zero in the router advertisement indicates that
+            the advertisement isn't specifying a value for retrans
+            time."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    DEFVAL { 0 }
+    ::= { ipv6RouterAdvertEntry 9 }
+
+ipv6RouterAdvertCurHopLimit OBJECT-TYPE
+    SYNTAX     Unsigned32 (0..255)
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The default value to be placed in the current hop limit
+            field in router advertisements sent from this interface.
+
+            The value should be set to the current diameter of the
+            Internet.
+
+            A value of zero in the router advertisement indicates that
+            the advertisement isn't specifying a value for curHopLimit.
+
+            The default should be set to the value specified in the IANA
+            web pages (www.iana.org) at the time of implementation."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    ::= { ipv6RouterAdvertEntry 10 }
+
+ipv6RouterAdvertDefaultLifetime OBJECT-TYPE
+    SYNTAX     Unsigned32 (0|4..9000)
+    UNITS      "seconds"
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The value to be placed in the router lifetime field of
+            router advertisements sent from this interface.  This value
+            MUST be either 0 or between ipv6RouterAdvertMaxInterval and
+            9000 seconds.
+
+            A value of zero indicates that the router is not to be used
+            as a default router.
+
+            The default is 3 * ipv6RouterAdvertMaxInterval."
+    REFERENCE "RFC 2461 Section 6.2.1"
+    ::= { ipv6RouterAdvertEntry 11 }
+
+ipv6RouterAdvertRowStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+           "The status of this conceptual row.
+
+            As all objects in this conceptual row have default values, a
+            row can be created and made active by setting this object
+            appropriately.
+
+            The RowStatus TC requires that this DESCRIPTION clause
+            states under which circumstances other objects in this row
+            can be modified.  The value of this object has no effect on
+            whether other objects in this conceptual row can be
+            modified."
+    ::= { ipv6RouterAdvertEntry 12 }
+
+--
+
+-- ICMP section
+--
+
+icmp     OBJECT IDENTIFIER ::= { mib-2 5 }
+
+--
+-- ICMP non-message-specific counters
+--
+
+-- These object IDs are reserved, as they were used in earlier
+-- versions of the MIB module.  In theory, OIDs are not assigned
+-- until the specification is released as an RFC; however, as some
+-- companies may have shipped code based on earlier versions of
+-- the MIB, it seems best to reserve these OIDs.
+-- ::= { icmp 27 }
+-- ::= { icmp 28 }
+
+icmpStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IcmpStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table of generic system-wide ICMP counters."
+    ::= { icmp 29 }
+
+icmpStatsEntry OBJECT-TYPE
+    SYNTAX     IcmpStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A conceptual row in the icmpStatsTable."
+    INDEX    { icmpStatsIPVersion }
+    ::= { icmpStatsTable 1 }
+
+IcmpStatsEntry ::= SEQUENCE {
+        icmpStatsIPVersion  InetVersion,
+        icmpStatsInMsgs     Counter32,
+        icmpStatsInErrors   Counter32,
+        icmpStatsOutMsgs    Counter32,
+        icmpStatsOutErrors  Counter32
+    }
+
+icmpStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of the statistics."
+    ::= { icmpStatsEntry 1 }
+
+icmpStatsInMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of ICMP messages that the entity received.
+            Note that this counter includes all those counted by
+            icmpStatsInErrors."
+    ::= { icmpStatsEntry 2 }
+
+icmpStatsInErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of ICMP messages that the entity received but
+            determined as having ICMP-specific errors (bad ICMP
+            checksums, bad length, etc.)."
+    ::= { icmpStatsEntry 3 }
+
+icmpStatsOutMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of ICMP messages that the entity attempted
+            to send.  Note that this counter includes all those counted
+            by icmpStatsOutErrors."
+    ::= { icmpStatsEntry 4 }
+
+icmpStatsOutErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of ICMP messages that this entity did not send
+            due to problems discovered within ICMP, such as a lack of
+            buffers.  This value should not include errors discovered
+            outside the ICMP layer, such as the inability of IP to route
+            the resultant datagram.  In some implementations, there may
+            be no types of error that contribute to this counter's
+            value."
+    ::= { icmpStatsEntry 5 }
+
+--
+-- per-version, per-message type ICMP counters
+
+--
+
+icmpMsgStatsTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IcmpMsgStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The table of system-wide per-version, per-message type ICMP
+            counters."
+    ::= { icmp 30 }
+
+icmpMsgStatsEntry OBJECT-TYPE
+    SYNTAX     IcmpMsgStatsEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "A conceptual row in the icmpMsgStatsTable.
+
+            The system should track each ICMP type value, even if that
+            ICMP type is not supported by the system.  However, a
+            given row need not be instantiated unless a message of that
+            type has been processed, i.e., the row for
+            icmpMsgStatsType=X MAY be instantiated before but MUST be
+            instantiated after the first message with Type=X is
+            received or transmitted.  After receiving or transmitting
+            any succeeding messages with Type=X, the relevant counter
+            must be incremented."
+    INDEX { icmpMsgStatsIPVersion, icmpMsgStatsType }
+    ::= { icmpMsgStatsTable 1 }
+
+IcmpMsgStatsEntry ::= SEQUENCE {
+        icmpMsgStatsIPVersion  InetVersion,
+        icmpMsgStatsType       Integer32,
+        icmpMsgStatsInPkts     Counter32,
+        icmpMsgStatsOutPkts    Counter32
+    }
+
+icmpMsgStatsIPVersion OBJECT-TYPE
+    SYNTAX     InetVersion
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The IP version of the statistics."
+    ::= { icmpMsgStatsEntry 1 }
+
+icmpMsgStatsType OBJECT-TYPE
+    SYNTAX     Integer32 (0..255)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+           "The ICMP type field of the message type being counted by
+            this row.
+
+            Note that ICMP message types are scoped by the address type
+            in use."
+    REFERENCE "http://www.iana.org/assignments/icmp-parameters and
+               http://www.iana.org/assignments/icmpv6-parameters"
+    ::= { icmpMsgStatsEntry 2 }
+
+icmpMsgStatsInPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of input packets for this AF and type."
+    ::= { icmpMsgStatsEntry 3 }
+
+icmpMsgStatsOutPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The number of output packets for this AF and type."
+    ::= { icmpMsgStatsEntry 4 }
+--
+-- conformance information
+--
+
+ipMIBConformance OBJECT IDENTIFIER ::= { ipMIB 2 }
+
+ipMIBCompliances OBJECT IDENTIFIER ::= { ipMIBConformance 1 }
+ipMIBGroups      OBJECT IDENTIFIER ::= { ipMIBConformance 2 }
+
+-- compliance statements
+ipMIBCompliance2 MODULE-COMPLIANCE
+    STATUS     current
+    DESCRIPTION
+            "The compliance statement for systems that implement IP -
+             either IPv4 or IPv6.
+
+            There are a number of INDEX objects that cannot be
+            represented in the form of OBJECT clauses in SMIv2, but
+            for which we have the following compliance requirements,
+            expressed in OBJECT clause form in this description
+            clause:
+
+            -- OBJECT        ipSystemStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        ipIfStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        icmpStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        icmpMsgStatsIPVersion
+            -- SYNTAX        InetVersion {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only IPv4 and IPv6
+            --     versions.
+            --
+            -- OBJECT        ipAddressPrefixType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4 and
+            --     IPv6 address types.
+            --
+            -- OBJECT        ipAddressPrefixPrefix
+            -- SYNTAX        InetAddress (Size(4 | 16))
+            -- DESCRIPTION
+            --     This MIB requires support for only global IPv4 and
+            --     IPv6 addresses and so the size can be either 4 or
+            --     16 bytes.
+            --
+            -- OBJECT        ipAddressAddrType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2),
+            --                                ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 address types.
+            --
+            -- OBJECT        ipAddressAddr
+            -- SYNTAX        InetAddress (Size(4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+
+            --     non-global IPv4 and IPv6 addresses and so the size
+            --     can be 4, 8, 16, or 20 bytes.
+            --
+            -- OBJECT        ipNetToPhysicalNetAddressType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2),
+            --                                ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 address types.
+            --
+            -- OBJECT        ipNetToPhysicalNetAddress
+            -- SYNTAX        InetAddress (Size(4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 addresses and so the size
+            --     can be 4, 8, 16, or 20 bytes.
+            --
+            -- OBJECT        ipDefaultRouterAddressType
+            -- SYNTAX        InetAddressType {ipv4(1), ipv6(2),
+            --                                ipv4z(3), ipv6z(4)}
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 address types.
+            --
+            -- OBJECT        ipDefaultRouterAddress
+            -- SYNTAX        InetAddress (Size(4 | 8 | 16 | 20))
+            -- DESCRIPTION
+            --     This MIB requires support for only global and
+            --     non-global IPv4 and IPv6 addresses and so the size
+            --     can be 4, 8, 16, or 20 bytes."
+
+    MODULE -- this module
+
+    MANDATORY-GROUPS { ipSystemStatsGroup,   ipAddressGroup,
+                       ipNetToPhysicalGroup, ipDefaultRouterGroup,
+                       icmpStatsGroup }
+
+    GROUP ipSystemStatsHCOctetGroup
+    DESCRIPTION
+           "This group is mandatory for systems that have an aggregate
+            bandwidth of greater than 20MB.  Including this group does
+            not allow an entity to neglect the 32 bit versions of these
+            objects."
+
+    GROUP ipSystemStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for systems that have an aggregate
+            bandwidth of greater than 650MB.  Including this group
+
+            does not allow an entity to neglect the 32 bit versions of
+            these objects."
+
+    GROUP ipIfStatsGroup
+    DESCRIPTION
+           "This group is optional for all systems."
+
+    GROUP ipIfStatsHCOctetGroup
+    DESCRIPTION
+           "This group is mandatory for systems that include the
+            ipIfStatsGroup and include links with bandwidths of greater
+            than 20MB.  Including this group does not allow an entity to
+            neglect the 32 bit versions of these objects."
+
+    GROUP ipIfStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for systems that include the
+            ipIfStatsGroup and include links with bandwidths of greater
+            than 650MB.  Including this group does not allow an entity
+            to neglect the 32 bit versions of these objects."
+
+    GROUP ipv4GeneralGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4."
+
+    GROUP ipv4IfGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4."
+
+    GROUP ipv4SystemStatsGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4."
+
+    GROUP ipv4SystemStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4 and
+            that have an aggregate bandwidth of greater than 650MB.
+            Including this group does not allow an entity to neglect the
+            32 bit versions of these objects."
+
+    GROUP ipv4IfStatsGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4 and
+            including the ipIfStatsGroup."
+
+    GROUP ipv4IfStatsHCPacketGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv4 and
+
+            including the ipIfStatsHCPacketGroup.  Including this group
+            does not allow an entity to neglect the 32 bit versions of
+            these objects."
+
+    GROUP ipv6GeneralGroup2
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipv6IfGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipAddressPrefixGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipv6ScopeGroup
+    DESCRIPTION
+           "This group is mandatory for all systems supporting IPv6."
+
+    GROUP ipv6RouterAdvertGroup
+    DESCRIPTION
+           "This group is mandatory for all IPv6 routers."
+
+    GROUP ipLastChangeGroup
+    DESCRIPTION
+           "This group is optional for all agents."
+
+    OBJECT     ipv6IpForwarding
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6IpDefaultHopLimit
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv4InterfaceEnableStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6InterfaceEnableStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6InterfaceForwarding
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipAddressSpinLock
+    MIN-ACCESS not-accessible
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object.  However, if an agent provides write access to any
+            of the other objects in the ipAddressGroup, it SHOULD
+            provide write access to this object as well."
+
+    OBJECT     ipAddressIfIndex
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressType
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressRowStatus
+    SYNTAX     RowStatus { active(1) }
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipAddressStorageType
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object.
+
+            If an agent allows this object to be written or created, it
+            is not required to allow this object to be set to readOnly,
+            permanent, or nonVolatile."
+
+    OBJECT     ipNetToPhysicalPhysAddress
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipNetToPhysicalType
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+
+    OBJECT     ipv6RouterAdvertSpinLock
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object.  However, if an agent provides write access to
+            any of the other objects in the ipv6RouterAdvertGroup, it
+            SHOULD provide write access to this object as well."
+
+    OBJECT     ipv6RouterAdvertSendAdverts
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertMaxInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertMinInterval
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertManagedFlag
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertOtherConfigFlag
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertLinkMTU
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertReachableTime
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertRetransmitTime
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertCurHopLimit
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertDefaultLifetime
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write access to this
+            object."
+
+    OBJECT     ipv6RouterAdvertRowStatus
+    MIN-ACCESS read-only
+    DESCRIPTION
+           "An agent is not required to provide write or create access
+            to this object."
+    ::= { ipMIBCompliances 2 }
+
+-- units of conformance
+
+ipv4GeneralGroup OBJECT-GROUP
+    OBJECTS   { ipForwarding, ipDefaultTTL, ipReasmTimeout }
+    STATUS     current
+    DESCRIPTION
+           "The group of IPv4-specific objects for basic management of
+            IPv4 entities."
+    ::= { ipMIBGroups 3 }
+
+ipv4IfGroup OBJECT-GROUP
+    OBJECTS   { ipv4InterfaceReasmMaxSize, ipv4InterfaceEnableStatus,
+                ipv4InterfaceRetransmitTime }
+    STATUS     current
+    DESCRIPTION
+           "The group of IPv4-specific objects for basic management of
+            IPv4 interfaces."
+    ::= { ipMIBGroups 4 }
+
+ipv6GeneralGroup2 OBJECT-GROUP
+    OBJECTS { ipv6IpForwarding, ipv6IpDefaultHopLimit }
+    STATUS     current
+    DESCRIPTION
+           "The IPv6 group of objects providing for basic management of
+            IPv6 entities."
+    ::= { ipMIBGroups 5 }
+
+ipv6IfGroup OBJECT-GROUP
+    OBJECTS   { ipv6InterfaceReasmMaxSize,   ipv6InterfaceIdentifier,
+                ipv6InterfaceEnableStatus,   ipv6InterfaceReachableTime,
+                ipv6InterfaceRetransmitTime, ipv6InterfaceForwarding }
+    STATUS     current
+    DESCRIPTION
+           "The group of IPv6-specific objects for basic management of
+            IPv6 interfaces."
+    ::= { ipMIBGroups 6 }
+
+ipLastChangeGroup OBJECT-GROUP
+    OBJECTS   { ipv4InterfaceTableLastChange,
+                ipv6InterfaceTableLastChange,
+                ipIfStatsTableLastChange }
+    STATUS     current
+    DESCRIPTION
+           "The last change objects associated with this MIB.  These
+            objects are optional for all agents.  They SHOULD be
+            implemented on agents where it is possible to determine the
+            proper values.  Where it is not possible to determine the
+            proper values, for example when the tables are split amongst
+            several sub-agents using AgentX, the agent MUST NOT
+            implement these objects to return an incorrect or static
+            value."
+    ::= { ipMIBGroups 7 }
+
+ipSystemStatsGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsInReceives,
+                ipSystemStatsInOctets,
+                ipSystemStatsInHdrErrors,
+                ipSystemStatsInNoRoutes,
+                ipSystemStatsInAddrErrors,
+                ipSystemStatsInUnknownProtos,
+                ipSystemStatsInTruncatedPkts,
+                ipSystemStatsInForwDatagrams,
+                ipSystemStatsReasmReqds,
+                ipSystemStatsReasmOKs,
+                ipSystemStatsReasmFails,
+                ipSystemStatsInDiscards,
+                ipSystemStatsInDelivers,
+                ipSystemStatsOutRequests,
+                ipSystemStatsOutNoRoutes,
+                ipSystemStatsOutForwDatagrams,
+                ipSystemStatsOutDiscards,
+                ipSystemStatsOutFragReqds,
+                ipSystemStatsOutFragOKs,
+                ipSystemStatsOutFragFails,
+                ipSystemStatsOutFragCreates,
+                ipSystemStatsOutTransmits,
+                ipSystemStatsOutOctets,
+                ipSystemStatsInMcastPkts,
+                ipSystemStatsInMcastOctets,
+                ipSystemStatsOutMcastPkts,
+                ipSystemStatsOutMcastOctets,
+                ipSystemStatsDiscontinuityTime,
+                ipSystemStatsRefreshRate }
+    STATUS     current
+    DESCRIPTION
+           "IP system wide statistics."
+    ::= { ipMIBGroups 8 }
+
+ipv4SystemStatsGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsInBcastPkts, ipSystemStatsOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only system wide statistics."
+    ::= { ipMIBGroups 9 }
+
+ipSystemStatsHCOctetGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsHCInOctets,
+                ipSystemStatsHCOutOctets,
+                ipSystemStatsHCInMcastOctets,
+                ipSystemStatsHCOutMcastOctets
+}
+    STATUS     current
+    DESCRIPTION
+           "IP system wide statistics for systems that may overflow the
+            standard octet counters within 1 hour."
+    ::= { ipMIBGroups 10 }
+
+ipSystemStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsHCInReceives,
+                ipSystemStatsHCInForwDatagrams,
+                ipSystemStatsHCInDelivers,
+                ipSystemStatsHCOutRequests,
+                ipSystemStatsHCOutForwDatagrams,
+                ipSystemStatsHCOutTransmits,
+                ipSystemStatsHCInMcastPkts,
+                ipSystemStatsHCOutMcastPkts
+}
+    STATUS     current
+    DESCRIPTION
+           "IP system wide statistics for systems that may overflow the
+            standard packet counters within 1 hour."
+    ::= { ipMIBGroups 11 }
+
+ipv4SystemStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipSystemStatsHCInBcastPkts,
+                ipSystemStatsHCOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only system wide statistics for systems that may
+            overflow the standard packet counters within 1 hour."
+    ::= { ipMIBGroups 12 }
+
+ipIfStatsGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsInReceives,        ipIfStatsInOctets,
+                ipIfStatsInHdrErrors,       ipIfStatsInNoRoutes,
+                ipIfStatsInAddrErrors,      ipIfStatsInUnknownProtos,
+                ipIfStatsInTruncatedPkts,   ipIfStatsInForwDatagrams,
+                ipIfStatsReasmReqds,        ipIfStatsReasmOKs,
+                ipIfStatsReasmFails,        ipIfStatsInDiscards,
+                ipIfStatsInDelivers,        ipIfStatsOutRequests,
+                ipIfStatsOutForwDatagrams,  ipIfStatsOutDiscards,
+                ipIfStatsOutFragReqds,      ipIfStatsOutFragOKs,
+                ipIfStatsOutFragFails,      ipIfStatsOutFragCreates,
+                ipIfStatsOutTransmits,      ipIfStatsOutOctets,
+                ipIfStatsInMcastPkts,       ipIfStatsInMcastOctets,
+                ipIfStatsOutMcastPkts,      ipIfStatsOutMcastOctets,
+                ipIfStatsDiscontinuityTime, ipIfStatsRefreshRate }
+    STATUS     current
+    DESCRIPTION
+           "IP per-interface statistics."
+    ::= { ipMIBGroups 13 }
+
+ipv4IfStatsGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsInBcastPkts, ipIfStatsOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only per-interface statistics."
+    ::= { ipMIBGroups 14 }
+
+ipIfStatsHCOctetGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsHCInOctets,      ipIfStatsHCOutOctets,
+                ipIfStatsHCInMcastOctets, ipIfStatsHCOutMcastOctets }
+    STATUS     current
+    DESCRIPTION
+           "IP per-interfaces statistics for systems that include
+            interfaces that may overflow the standard octet
+            counters within 1 hour."
+    ::= { ipMIBGroups 15 }
+
+ipIfStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsHCInReceives,       ipIfStatsHCInForwDatagrams,
+                ipIfStatsHCInDelivers,       ipIfStatsHCOutRequests,
+                ipIfStatsHCOutForwDatagrams, ipIfStatsHCOutTransmits,
+                ipIfStatsHCInMcastPkts,      ipIfStatsHCOutMcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IP per-interfaces statistics for systems that include
+            interfaces that may overflow the standard packet counters
+            within 1 hour."
+    ::= { ipMIBGroups 16 }
+
+ipv4IfStatsHCPacketGroup OBJECT-GROUP
+    OBJECTS   { ipIfStatsHCInBcastPkts, ipIfStatsHCOutBcastPkts }
+    STATUS     current
+    DESCRIPTION
+           "IPv4 only per-interface statistics for systems that include
+            interfaces that may overflow the standard packet counters
+            within 1 hour."
+    ::= { ipMIBGroups 17 }
+
+ipAddressPrefixGroup OBJECT-GROUP
+    OBJECTS   { ipAddressPrefixOrigin,
+                ipAddressPrefixOnLinkFlag,
+                ipAddressPrefixAutonomousFlag,
+                ipAddressPrefixAdvPreferredLifetime,
+                ipAddressPrefixAdvValidLifetime }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about address
+            prefixes used by this node."
+    ::= { ipMIBGroups 18 }
+
+ipAddressGroup OBJECT-GROUP
+    OBJECTS   { ipAddressSpinLock,  ipAddressIfIndex,
+                ipAddressType,      ipAddressPrefix,
+                ipAddressOrigin,    ipAddressStatus,
+                ipAddressCreated,   ipAddressLastChanged,
+                ipAddressRowStatus, ipAddressStorageType }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about the
+            addresses relevant to this entity's interfaces."
+    ::= { ipMIBGroups 19 }
+
+ipNetToPhysicalGroup OBJECT-GROUP
+    OBJECTS   { ipNetToPhysicalPhysAddress, ipNetToPhysicalLastUpdated,
+                ipNetToPhysicalType,        ipNetToPhysicalState,
+                ipNetToPhysicalRowStatus }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about the
+            mappings of network address to physical address known to
+            this node."
+    ::= { ipMIBGroups 20 }
+
+ipv6ScopeGroup OBJECT-GROUP
+    OBJECTS   { ipv6ScopeZoneIndexLinkLocal,
+                ipv6ScopeZoneIndex3,
+                ipv6ScopeZoneIndexAdminLocal,
+                ipv6ScopeZoneIndexSiteLocal,
+                ipv6ScopeZoneIndex6,
+                ipv6ScopeZoneIndex7,
+                ipv6ScopeZoneIndexOrganizationLocal,
+                ipv6ScopeZoneIndex9,
+                ipv6ScopeZoneIndexA,
+                ipv6ScopeZoneIndexB,
+                ipv6ScopeZoneIndexC,
+                ipv6ScopeZoneIndexD }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for managing IPv6 scope zones."
+    ::= { ipMIBGroups 21 }
+
+ipDefaultRouterGroup OBJECT-GROUP
+    OBJECTS   { ipDefaultRouterLifetime, ipDefaultRouterPreference }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for providing information about default
+            routers known to this node."
+    ::= { ipMIBGroups 22 }
+
+ipv6RouterAdvertGroup OBJECT-GROUP
+    OBJECTS   { ipv6RouterAdvertSpinLock,
+                ipv6RouterAdvertSendAdverts,
+                ipv6RouterAdvertMaxInterval,
+                ipv6RouterAdvertMinInterval,
+                ipv6RouterAdvertManagedFlag,
+                ipv6RouterAdvertOtherConfigFlag,
+                ipv6RouterAdvertLinkMTU,
+                ipv6RouterAdvertReachableTime,
+                ipv6RouterAdvertRetransmitTime,
+                ipv6RouterAdvertCurHopLimit,
+                ipv6RouterAdvertDefaultLifetime,
+                ipv6RouterAdvertRowStatus
+}
+    STATUS     current
+    DESCRIPTION
+           "The group of objects for controlling information advertised
+            by IPv6 routers."
+    ::= { ipMIBGroups 23 }
+
+icmpStatsGroup OBJECT-GROUP
+    OBJECTS   {icmpStatsInMsgs,    icmpStatsInErrors,
+               icmpStatsOutMsgs,   icmpStatsOutErrors,
+               icmpMsgStatsInPkts, icmpMsgStatsOutPkts }
+    STATUS     current
+    DESCRIPTION
+           "The group of objects providing ICMP statistics."
+    ::= { ipMIBGroups 24 }
+
+--
+-- Deprecated objects
+--
+
+ipInReceives OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of input datagrams received from
+            interfaces, including those received in error.
+
+            This object has been deprecated, as a new IP version-neutral
+
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInRecieves."
+    ::= { ip 3 }
+
+ipInHdrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input datagrams discarded due to errors in
+            their IPv4 headers, including bad checksums, version number
+            mismatch, other format errors, time-to-live exceeded, errors
+            discovered in processing their IPv4 options, etc.
+
+            This object has been deprecated as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInHdrErrors."
+    ::= { ip 4 }
+
+ipInAddrErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input datagrams discarded because the IPv4
+            address in their IPv4 header's destination field was not a
+            valid address to be received at this entity.  This count
+            includes invalid addresses (e.g., 0.0.0.0) and addresses of
+            unsupported Classes (e.g., Class E).  For entities which are
+            not IPv4 routers, and therefore do not forward datagrams,
+            this counter includes datagrams discarded because the
+            destination address was not a local address.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInAddrErrors."
+    ::= { ip 5 }
+
+ipForwDatagrams OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input datagrams for which this entity was not
+            their final IPv4 destination, as a result of which an
+            attempt was made to find a route to forward them to that
+            final destination.  In entities which do not act as IPv4
+            routers, this counter will include only those packets which
+
+            were Source-Routed via this entity, and the Source-Route
+            option processing was successful.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInForwDatagrams."
+    ::= { ip 6 }
+
+ipInUnknownProtos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of locally-addressed datagrams received
+            successfully but discarded because of an unknown or
+            unsupported protocol.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInUnknownProtos."
+    ::= { ip 7 }
+
+ipInDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of input IPv4 datagrams for which no problems
+            were encountered to prevent their continued processing, but
+            which were discarded (e.g., for lack of buffer space).  Note
+            that this counter does not include any datagrams discarded
+            while awaiting re-assembly.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsInDiscards."
+    ::= { ip 8 }
+
+ipInDelivers OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of input datagrams successfully delivered
+            to IPv4 user-protocols (including ICMP).
+
+            This object has been deprecated as a new IP version neutral
+            table has been added.  It is loosely replaced by
+
+            ipSystemStatsIndelivers."
+    ::= { ip 9 }
+
+ipOutRequests OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of IPv4 datagrams which local IPv4 user
+            protocols (including ICMP) supplied to IPv4 in requests for
+            transmission.  Note that this counter does not include any
+            datagrams counted in ipForwDatagrams.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutRequests."
+    ::= { ip 10 }
+
+ipOutDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of output IPv4 datagrams for which no problem was
+            encountered to prevent their transmission to their
+            destination, but which were discarded (e.g., for lack of
+            buffer space).  Note that this counter would include
+            datagrams counted in ipForwDatagrams if any such packets met
+            this (discretionary) discard criterion.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutDiscards."
+    ::= { ip 11 }
+
+ipOutNoRoutes OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams discarded because no route
+            could be found to transmit them to their destination.  Note
+            that this counter includes any packets counted in
+            ipForwDatagrams which meet this `no-route' criterion.  Note
+            that this includes any datagrams which a host cannot route
+            because all of its default routers are down.
+
+            This object has been deprecated, as a new IP version-neutral
+
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutNoRoutes."
+    ::= { ip 12 }
+
+ipReasmReqds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 fragments received which needed to be
+            reassembled at this entity.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsReasmReqds."
+    ::= { ip 14 }
+
+ipReasmOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams successfully re-assembled.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsReasmOKs."
+    ::= { ip 15 }
+
+ipReasmFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of failures detected by the IPv4 re-assembly
+            algorithm (for whatever reason: timed out, errors, etc).
+            Note that this is not necessarily a count of discarded IPv4
+            fragments since some algorithms (notably the algorithm in
+            RFC 815) can lose track of the number of fragments by
+            combining them as they are received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsReasmFails."
+    ::= { ip 16 }
+
+ipFragOKs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams that have been successfully
+            fragmented at this entity.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutFragOKs."
+    ::= { ip 17 }
+
+ipFragFails OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagrams that have been discarded
+            because they needed to be fragmented at this entity but
+            could not be, e.g., because their Don't Fragment flag was
+            set.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutFragFails."
+    ::= { ip 18 }
+
+ipFragCreates OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of IPv4 datagram fragments that have been
+            generated as a result of fragmentation at this entity.
+
+            This object has been deprecated as a new IP version neutral
+            table has been added.  It is loosely replaced by
+            ipSystemStatsOutFragCreates."
+    ::= { ip 19 }
+
+ipRoutingDiscards OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of routing entries which were chosen to be
+            discarded even though they are valid.  One possible reason
+            for discarding such an entry could be to free-up buffer
+            space for other routing entries.
+
+            This object was defined in pre-IPv6 versions of the IP MIB.
+            It was implicitly IPv4 only, but the original specifications
+            did not indicate this protocol restriction.  In order to
+            clarify the specifications, this object has been deprecated
+            and a similar, but more thoroughly clarified, object has
+            been added to the IP-FORWARD-MIB."
+    ::= { ip 23 }
+
+-- the deprecated IPv4 address table
+
+ipAddrTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpAddrEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The table of addressing information relevant to this
+            entity's IPv4 addresses.
+
+            This table has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by the
+            ipAddressTable although several objects that weren't deemed
+            useful weren't carried forward while another
+            (ipAdEntReasmMaxSize) was moved to the ipv4InterfaceTable."
+    ::= { ip 20 }
+
+ipAddrEntry OBJECT-TYPE
+    SYNTAX     IpAddrEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The addressing information for one of this entity's IPv4
+            addresses."
+    INDEX      { ipAdEntAddr }
+    ::= { ipAddrTable 1 }
+
+IpAddrEntry ::= SEQUENCE {
+        ipAdEntAddr          IpAddress,
+        ipAdEntIfIndex       INTEGER,
+        ipAdEntNetMask       IpAddress,
+        ipAdEntBcastAddr     INTEGER,
+        ipAdEntReasmMaxSize  INTEGER
+    }
+
+ipAdEntAddr OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The IPv4 address to which this entry's addressing
+            information pertains."
+    ::= { ipAddrEntry 1 }
+
+ipAdEntIfIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The index value which uniquely identifies the interface to
+            which this entry is applicable.  The interface identified by
+            a particular value of this index is the same interface as
+            identified by the same value of the IF-MIB's ifIndex."
+    ::= { ipAddrEntry 2 }
+
+ipAdEntNetMask OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The subnet mask associated with the IPv4 address of this
+            entry.  The value of the mask is an IPv4 address with all
+            the network bits set to 1 and all the hosts bits set to 0."
+    ::= { ipAddrEntry 3 }
+
+ipAdEntBcastAddr OBJECT-TYPE
+    SYNTAX     INTEGER (0..1)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The value of the least-significant bit in the IPv4 broadcast
+            address used for sending datagrams on the (logical)
+            interface associated with the IPv4 address of this entry.
+            For example, when the Internet standard all-ones broadcast
+            address is used, the value will be 1.  This value applies to
+            both the subnet and network broadcast addresses used by the
+            entity on this (logical) interface."
+    ::= { ipAddrEntry 4 }
+
+ipAdEntReasmMaxSize OBJECT-TYPE
+    SYNTAX     INTEGER (0..65535)
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The size of the largest IPv4 datagram which this entity can
+            re-assemble from incoming IPv4 fragmented datagrams received
+            on this interface."
+    ::= { ipAddrEntry 5 }
+
+-- the deprecated IPv4 Address Translation table
+
+-- The Address Translation tables contain the IpAddress to
+-- "physical" address equivalences.  Some interfaces do not
+-- use translation tables for determining address
+-- equivalences (e.g., DDN-X.25 has an algorithmic method);
+-- if all interfaces are of this type, then the Address
+-- Translation table is empty, i.e., has zero entries.
+
+ipNetToMediaTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF IpNetToMediaEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "The IPv4 Address Translation table used for mapping from
+            IPv4 addresses to physical addresses.
+
+            This table has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by the
+            ipNetToPhysicalTable."
+    ::= { ip 22 }
+
+ipNetToMediaEntry OBJECT-TYPE
+    SYNTAX     IpNetToMediaEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+           "Each entry contains one IpAddress to `physical' address
+            equivalence."
+    INDEX       { ipNetToMediaIfIndex,
+                  ipNetToMediaNetAddress }
+    ::= { ipNetToMediaTable 1 }
+
+IpNetToMediaEntry ::= SEQUENCE {
+        ipNetToMediaIfIndex      INTEGER,
+        ipNetToMediaPhysAddress  PhysAddress,
+        ipNetToMediaNetAddress   IpAddress,
+        ipNetToMediaType         INTEGER
+    }
+
+ipNetToMediaIfIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..2147483647)
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The interface on which this entry's equivalence is
+            effective.  The interface identified by a particular value
+            of this index is the same interface as identified by the
+
+            same value of the IF-MIB's ifIndex.
+
+            This object predates the rule limiting index objects to a
+            max access value of 'not-accessible' and so continues to use
+            a value of 'read-create'."
+    ::= { ipNetToMediaEntry 1 }
+
+ipNetToMediaPhysAddress OBJECT-TYPE
+    SYNTAX     PhysAddress (SIZE(0..65535))
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The media-dependent `physical' address.  This object should
+            return 0 when this entry is in the 'incomplete' state.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity should not save the
+            change to non-volatile storage.  Note: a stronger
+            requirement is not used because this object was previously
+            defined."
+    ::= { ipNetToMediaEntry 2 }
+
+ipNetToMediaNetAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The IpAddress corresponding to the media-dependent
+            `physical' address.
+
+            This object predates the rule limiting index objects to a
+            max access value of 'not-accessible' and so continues to use
+            a value of 'read-create'."
+    ::= { ipNetToMediaEntry 3 }
+
+ipNetToMediaType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                other(1),        -- none of the following
+                invalid(2),      -- an invalidated mapping
+                dynamic(3),
+                static(4)
+            }
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+           "The type of mapping.
+
+            Setting this object to the value invalid(2) has the effect
+
+            of invalidating the corresponding entry in the
+            ipNetToMediaTable.  That is, it effectively dis-associates
+            the interface identified with said entry from the mapping
+            identified with said entry.  It is an implementation-
+            specific matter as to whether the agent removes an
+            invalidated entry from the table.  Accordingly, management
+            stations must be prepared to receive tabular information
+            from agents that corresponds to entries not currently in
+            use.  Proper interpretation of such entries requires
+            examination of the relevant ipNetToMediaType object.
+
+            As the entries in this table are typically not persistent
+            when this object is written the entity should not save the
+            change to non-volatile storage.  Note: a stronger
+            requirement is not used because this object was previously
+            defined."
+    ::= { ipNetToMediaEntry 4 }
+
+-- the deprecated ICMP group
+
+icmpInMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of ICMP messages which the entity received.
+            Note that this counter includes all those counted by
+            icmpInErrors.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsInMsgs."
+    ::= { icmp 1 }
+
+icmpInErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP messages which the entity received but
+            determined as having ICMP-specific errors (bad ICMP
+            checksums, bad length, etc.).
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsInErrors."
+    ::= { icmp 2 }
+
+icmpInDestUnreachs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Destination Unreachable messages
+            received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 3 }
+
+icmpInTimeExcds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Time Exceeded messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 4 }
+
+icmpInParmProbs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Parameter Problem messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 5 }
+
+icmpInSrcQuenchs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Source Quench messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 6 }
+
+icmpInRedirects OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Redirect messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 7 }
+
+icmpInEchos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo (request) messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 8 }
+
+icmpInEchoReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo Reply messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 9 }
+
+icmpInTimestamps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp (request) messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 10 }
+
+icmpInTimestampReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp Reply messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 11 }
+
+icmpInAddrMasks OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Request messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 12 }
+
+icmpInAddrMaskReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Reply messages received.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 13 }
+
+icmpOutMsgs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The total number of ICMP messages which this entity
+            attempted to send.  Note that this counter includes all
+            those counted by icmpOutErrors.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsOutMsgs."
+    ::= { icmp 14 }
+
+icmpOutErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP messages which this entity did not send
+            due to problems discovered within ICMP, such as a lack of
+            buffers.  This value should not include errors discovered
+            outside the ICMP layer, such as the inability of IP to route
+            the resultant datagram.  In some implementations, there may
+            be no types of error which contribute to this counter's
+            value.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by
+            icmpStatsOutErrors."
+    ::= { icmp 15 }
+
+icmpOutDestUnreachs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Destination Unreachable messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 16 }
+
+icmpOutTimeExcds OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Time Exceeded messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 17 }
+
+icmpOutParmProbs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Parameter Problem messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 18 }
+
+icmpOutSrcQuenchs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Source Quench messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 19 }
+
+icmpOutRedirects OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Redirect messages sent.  For a host, this
+            object will always be zero, since hosts do not send
+            redirects.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 20 }
+
+icmpOutEchos OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo (request) messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 21 }
+
+icmpOutEchoReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Echo Reply messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 22 }
+
+icmpOutTimestamps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp (request) messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 23 }
+
+icmpOutTimestampReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Timestamp Reply messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 24 }
+
+icmpOutAddrMasks OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Request messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 25 }
+
+icmpOutAddrMaskReps OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+           "The number of ICMP Address Mask Reply messages sent.
+
+            This object has been deprecated, as a new IP version-neutral
+            table has been added.  It is loosely replaced by a column in
+            the icmpMsgStatsTable."
+    ::= { icmp 26 }
+
+-- deprecated conformance information
+-- deprecated compliance statements
+
+ipMIBCompliance MODULE-COMPLIANCE
+    STATUS     deprecated
+    DESCRIPTION
+           "The compliance statement for systems that implement only
+            IPv4.  For version-independence, this compliance statement
+            is deprecated in favor of ipMIBCompliance2."
+    MODULE  -- this module
+        MANDATORY-GROUPS { ipGroup,
+                           icmpGroup }
+    ::= { ipMIBCompliances 1 }
+
+-- deprecated units of conformance
+
+ipGroup OBJECT-GROUP
+    OBJECTS   { ipForwarding,           ipDefaultTTL,
+                ipInReceives,           ipInHdrErrors,
+                ipInAddrErrors,         ipForwDatagrams,
+                ipInUnknownProtos,      ipInDiscards,
+                ipInDelivers,           ipOutRequests,
+                ipOutDiscards,          ipOutNoRoutes,
+                ipReasmTimeout,         ipReasmReqds,
+                ipReasmOKs,             ipReasmFails,
+                ipFragOKs,              ipFragFails,
+                ipFragCreates,          ipAdEntAddr,
+                ipAdEntIfIndex,         ipAdEntNetMask,
+                ipAdEntBcastAddr,       ipAdEntReasmMaxSize,
+                ipNetToMediaIfIndex,    ipNetToMediaPhysAddress,
+                ipNetToMediaNetAddress, ipNetToMediaType,
+                ipRoutingDiscards
+}
+    STATUS     deprecated
+    DESCRIPTION
+           "The ip group of objects providing for basic management of IP
+            entities, exclusive of the management of IP routes.
+
+            As part of the version independence, this group has been
+            deprecated.  "
+    ::= { ipMIBGroups 1 }
+
+icmpGroup OBJECT-GROUP
+    OBJECTS   { icmpInMsgs,          icmpInErrors,
+                icmpInDestUnreachs,  icmpInTimeExcds,
+                icmpInParmProbs,     icmpInSrcQuenchs,
+                icmpInRedirects,     icmpInEchos,
+                icmpInEchoReps,      icmpInTimestamps,
+                icmpInTimestampReps, icmpInAddrMasks,
+                icmpInAddrMaskReps,  icmpOutMsgs,
+                icmpOutErrors,       icmpOutDestUnreachs,
+                icmpOutTimeExcds,    icmpOutParmProbs,
+                icmpOutSrcQuenchs,   icmpOutRedirects,
+                icmpOutEchos,        icmpOutEchoReps,
+                icmpOutTimestamps,   icmpOutTimestampReps,
+                icmpOutAddrMasks,    icmpOutAddrMaskReps }
+    STATUS     deprecated
+    DESCRIPTION
+           "The icmp group of objects providing ICMP statistics.
+
+            As part of the version independence, this group has been
+            deprecated.  "
+    ::= { ipMIBGroups 2 }
+
+END
diff --git a/share/snmp/Makefile b/share/snmp/Makefile
index ed86319e934..d10832282ef 100644
--- a/share/snmp/Makefile
+++ b/share/snmp/Makefile
@@ -1,10 +1,20 @@
-# $OpenBSD: Makefile,v 1.7 2019/12/21 21:40:00 espie Exp $
+# $OpenBSD: Makefile,v 1.8 2024/02/05 11:46:58 martijn Exp $
 
+# OpenBSD
 FILES=	OPENBSD-SNMPD-CONF.txt OPENBSD-BASE-MIB.txt
 FILES+=	OPENBSD-MEM-MIB.txt OPENBSD-SENSORS-MIB.txt
 FILES+= OPENBSD-CARP-MIB.txt OPENBSD-PF-MIB.txt
 FILES+= OPENBSD-RELAYD-MIB.txt
 
+# IANA/IETF
+FILES+=	BRIDGE-MIB.txt HOST-RESOURCES-MIB.txt IANA-RTPROTO-MIB.txt
+FILES+=	IANA-STORAGE-MEDIA-TYPE-MIB.txt IANAifType-MIB.txt IF-MIB.txt
+FILES+=	INET-ADDRESS-MIB.txt IP-FORWARD-MIB.txt IP-MIB.txt
+FILES+=	SNMP-FRAMEWORK-MIB.txt SNMP-USER-BASED-SM-MIB.txt SNMP-USM-AES-MIB.txt
+FILES+=	SNMP-USM-HMAC-SHA2-MIB.txt SNMPv2-CONF.txt SNMPv2-MIB.txt SNMPv2-SMI.txt
+FILES+=	SNMPv2-TC.txt SNMPv2-TM.txt TRANSPORT-ADDRESS-MIB.txt UUID-TC-MIB.txt
+FILES+=	VM-MIB.txt
+
 all clean cleandir obj tags: _SUBDIRUSE
 
 realinstall:
diff --git a/share/snmp/SNMP-FRAMEWORK-MIB.txt b/share/snmp/SNMP-FRAMEWORK-MIB.txt
new file mode 100644
index 00000000000..aa273c28584
--- /dev/null
+++ b/share/snmp/SNMP-FRAMEWORK-MIB.txt
@@ -0,0 +1,526 @@
+SNMP-FRAMEWORK-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    OBJECT-IDENTITY,
+    snmpModules                           FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                    FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP       FROM SNMPv2-CONF;
+
+snmpFrameworkMIB MODULE-IDENTITY
+    LAST-UPDATED "200210140000Z"
+    ORGANIZATION "SNMPv3 Working Group"
+    CONTACT-INFO "WG-EMail:   snmpv3@lists.tislabs.com
+                  Subscribe:  snmpv3-request@lists.tislabs.com
+
+                  Co-Chair:   Russ Mundy
+                              Network Associates Laboratories
+                  postal:     15204 Omega Drive, Suite 300
+                              Rockville, MD 20850-4601
+                              USA
+                  EMail:      mundy@tislabs.com
+                  phone:      +1 301-947-7107
+
+                  Co-Chair &
+                  Co-editor:  David Harrington
+                              Enterasys Networks
+                  postal:     35 Industrial Way
+                              P. O. Box 5005
+                              Rochester, New Hampshire 03866-5005
+                              USA
+                  EMail:      dbh@enterasys.com
+                  phone:      +1 603-337-2614
+
+                  Co-editor:  Randy Presuhn
+                              BMC Software, Inc.
+                  postal:     2141 North First Street
+                              San Jose, California 95131
+                              USA
+                  EMail:      randy_presuhn@bmc.com
+                  phone:      +1 408-546-1006
+
+                  Co-editor:  Bert Wijnen
+                              Lucent Technologies
+                  postal:     Schagen 33
+                              3461 GL Linschoten
+                              Netherlands
+
+                  EMail:      bwijnen@lucent.com
+                  phone:      +31 348-680-485
+                    "
+       DESCRIPTION  "The SNMP Management Architecture MIB
+
+                     Copyright (C) The Internet Society (2002). This
+                     version of this MIB module is part of RFC 3411;
+                     see the RFC itself for full legal notices.
+                    "
+
+       REVISION     "200210140000Z"         -- 14 October 2002
+       DESCRIPTION  "Changes in this revision:
+                     - Updated various administrative information.
+                     - Corrected some typos.
+                     - Corrected typo in description of SnmpEngineID
+                       that led to range overlap for 127.
+                     - Changed '255a' to '255t' in definition of
+                       SnmpAdminString to align with current SMI.
+                     - Reworded 'reserved' for value zero in
+                       DESCRIPTION of SnmpSecurityModel.
+                     - The algorithm for allocating security models
+                       should give 256 per enterprise block, rather
+                       than 255.
+                     - The example engine ID of 'abcd' is not
+                       legal. Replaced with '800002b804616263'H based
+                       on example enterprise 696, string 'abc'.
+                     - Added clarification that engineID should
+                       persist across re-initializations.
+                     This revision published as RFC 3411.
+                    "
+       REVISION     "199901190000Z"         -- 19 January 1999
+       DESCRIPTION  "Updated editors' addresses, fixed typos.
+                     Published as RFC 2571.
+                    "
+       REVISION     "199711200000Z"         -- 20 November 1997
+       DESCRIPTION  "The initial version, published in RFC 2271.
+                    "
+       ::= { snmpModules 10 }
+
+   -- Textual Conventions used in the SNMP Management Architecture ***
+
+SnmpEngineID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "An SNMP engine's administratively-unique identifier.
+                 Objects of this type are for identification, not for
+                 addressing, even though it is possible that an
+                 address may have been used in the generation of
+                 a specific value.
+
+                 The value for this object may not be all zeros or
+                 all 'ff'H or the empty (zero length) string.
+
+                 The initial value for this object may be configured
+                 via an operator console entry or via an algorithmic
+                 function.  In the latter case, the following
+                 example algorithm is recommended.
+
+                 In cases where there are multiple engines on the
+                 same system, the use of this algorithm is NOT
+                 appropriate, as it would result in all of those
+                 engines ending up with the same ID value.
+
+                 1) The very first bit is used to indicate how the
+                    rest of the data is composed.
+
+                    0 - as defined by enterprise using former methods
+                        that existed before SNMPv3. See item 2 below.
+
+                    1 - as defined by this architecture, see item 3
+                        below.
+
+                    Note that this allows existing uses of the
+                    engineID (also known as AgentID [RFC1910]) to
+                    co-exist with any new uses.
+
+                 2) The snmpEngineID has a length of 12 octets.
+
+                    The first four octets are set to the binary
+                    equivalent of the agent's SNMP management
+                    private enterprise number as assigned by the
+                    Internet Assigned Numbers Authority (IANA).
+                    For example, if Acme Networks has been assigned
+                    { enterprises 696 }, the first four octets would
+                    be assigned '000002b8'H.
+
+                    The remaining eight octets are determined via
+                    one or more enterprise-specific methods. Such
+                    methods must be designed so as to maximize the
+                    possibility that the value of this object will
+                    be unique in the agent's administrative domain.
+                    For example, it may be the IP address of the SNMP
+                    entity, or the MAC address of one of the
+                    interfaces, with each address suitably padded
+                    with random octets.  If multiple methods are
+                    defined, then it is recommended that the first
+                    octet indicate the method being used and the
+                    remaining octets be a function of the method.
+
+                 3) The length of the octet string varies.
+
+                    The first four octets are set to the binary
+                    equivalent of the agent's SNMP management
+                    private enterprise number as assigned by the
+                    Internet Assigned Numbers Authority (IANA).
+                    For example, if Acme Networks has been assigned
+                    { enterprises 696 }, the first four octets would
+                    be assigned '000002b8'H.
+
+                    The very first bit is set to 1. For example, the
+                    above value for Acme Networks now changes to be
+                    '800002b8'H.
+
+                    The fifth octet indicates how the rest (6th and
+                    following octets) are formatted. The values for
+                    the fifth octet are:
+
+                      0     - reserved, unused.
+
+                      1     - IPv4 address (4 octets)
+                              lowest non-special IP address
+
+                      2     - IPv6 address (16 octets)
+                              lowest non-special IP address
+
+                      3     - MAC address (6 octets)
+                              lowest IEEE MAC address, canonical
+                              order
+
+                      4     - Text, administratively assigned
+                              Maximum remaining length 27
+
+                      5     - Octets, administratively assigned
+                              Maximum remaining length 27
+
+                      6-127 - reserved, unused
+
+                    128-255 - as defined by the enterprise
+                              Maximum remaining length 27
+                "
+    SYNTAX       OCTET STRING (SIZE(5..32))
+
+SnmpSecurityModel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "An identifier that uniquely identifies a
+                 Security Model of the Security Subsystem within
+                 this SNMP Management Architecture.
+
+                 The values for securityModel are allocated as
+                 follows:
+
+                 - The zero value does not identify any particular
+                   security model.
+
+                 - Values between 1 and 255, inclusive, are reserved
+                   for standards-track Security Models and are
+                   managed by the Internet Assigned Numbers Authority
+                   (IANA).
+                 - Values greater than 255 are allocated to
+                   enterprise-specific Security Models.  An
+                   enterprise-specific securityModel value is defined
+                   to be:
+
+                   enterpriseID * 256 + security model within
+                   enterprise
+
+                   For example, the fourth Security Model defined by
+                   the enterprise whose enterpriseID is 1 would be
+                   259.
+
+                 This scheme for allocation of securityModel
+                 values allows for a maximum of 255 standards-
+                 based Security Models, and for a maximum of
+                 256 Security Models per enterprise.
+
+                 It is believed that the assignment of new
+                 securityModel values will be rare in practice
+                 because the larger the number of simultaneously
+                 utilized Security Models, the larger the
+                 chance that interoperability will suffer.
+                 Consequently, it is believed that such a range
+                 will be sufficient.  In the unlikely event that
+                 the standards committee finds this number to be
+                 insufficient over time, an enterprise number
+                 can be allocated to obtain an additional 256
+                 possible values.
+
+                 Note that the most significant bit must be zero;
+                 hence, there are 23 bits allocated for various
+                 organizations to design and define non-standard
+
+                 securityModels.  This limits the ability to
+                 define new proprietary implementations of Security
+                 Models to the first 8,388,608 enterprises.
+
+                 It is worthwhile to note that, in its encoded
+                 form, the securityModel value will normally
+                 require only a single byte since, in practice,
+                 the leftmost bits will be zero for most messages
+                 and sign extension is suppressed by the encoding
+                 rules.
+
+                 As of this writing, there are several values
+                 of securityModel defined for use with SNMP or
+                 reserved for use with supporting MIB objects.
+                 They are as follows:
+
+                     0  reserved for 'any'
+                     1  reserved for SNMPv1
+                     2  reserved for SNMPv2c
+                     3  User-Based Security Model (USM)
+                "
+    SYNTAX       INTEGER(0 .. 2147483647)
+
+SnmpMessageProcessingModel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "An identifier that uniquely identifies a Message
+                 Processing Model of the Message Processing
+                 Subsystem within this SNMP Management Architecture.
+
+                 The values for messageProcessingModel are
+                 allocated as follows:
+
+                 - Values between 0 and 255, inclusive, are
+                   reserved for standards-track Message Processing
+                   Models and are managed by the Internet Assigned
+                   Numbers Authority (IANA).
+
+                 - Values greater than 255 are allocated to
+                   enterprise-specific Message Processing Models.
+                   An enterprise messageProcessingModel value is
+                   defined to be:
+
+                   enterpriseID * 256 +
+                        messageProcessingModel within enterprise
+
+                   For example, the fourth Message Processing Model
+                   defined by the enterprise whose enterpriseID
+
+                   is 1 would be 259.
+
+                 This scheme for allocating messageProcessingModel
+                 values allows for a maximum of 255 standards-
+                 based Message Processing Models, and for a
+                 maximum of 256 Message Processing Models per
+                 enterprise.
+
+                 It is believed that the assignment of new
+                 messageProcessingModel values will be rare
+                 in practice because the larger the number of
+                 simultaneously utilized Message Processing Models,
+                 the larger the chance that interoperability
+                 will suffer. It is believed that such a range
+                 will be sufficient.  In the unlikely event that
+                 the standards committee finds this number to be
+                 insufficient over time, an enterprise number
+                 can be allocated to obtain an additional 256
+                 possible values.
+
+                 Note that the most significant bit must be zero;
+                 hence, there are 23 bits allocated for various
+                 organizations to design and define non-standard
+                 messageProcessingModels.  This limits the ability
+                 to define new proprietary implementations of
+                 Message Processing Models to the first 8,388,608
+                 enterprises.
+
+                 It is worthwhile to note that, in its encoded
+                 form, the messageProcessingModel value will
+                 normally require only a single byte since, in
+                 practice, the leftmost bits will be zero for
+                 most messages and sign extension is suppressed
+                 by the encoding rules.
+
+                 As of this writing, there are several values of
+                 messageProcessingModel defined for use with SNMP.
+                 They are as follows:
+
+                     0  reserved for SNMPv1
+                     1  reserved for SNMPv2c
+                     2  reserved for SNMPv2u and SNMPv2*
+                     3  reserved for SNMPv3
+                "
+    SYNTAX       INTEGER(0 .. 2147483647)
+
+SnmpSecurityLevel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION "A Level of Security at which SNMP messages can be
+                 sent or with which operations are being processed;
+                 in particular, one of:
+
+                   noAuthNoPriv - without authentication and
+                                  without privacy,
+                   authNoPriv   - with authentication but
+                                  without privacy,
+                   authPriv     - with authentication and
+                                  with privacy.
+
+                 These three values are ordered such that
+                 noAuthNoPriv is less than authNoPriv and
+                 authNoPriv is less than authPriv.
+                "
+    SYNTAX       INTEGER { noAuthNoPriv(1),
+                           authNoPriv(2),
+                           authPriv(3)
+                         }
+
+SnmpAdminString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255t"
+    STATUS       current
+    DESCRIPTION "An octet string containing administrative
+                 information, preferably in human-readable form.
+
+                 To facilitate internationalization, this
+                 information is represented using the ISO/IEC
+                 IS 10646-1 character set, encoded as an octet
+                 string using the UTF-8 transformation format
+                 described in [RFC2279].
+
+                 Since additional code points are added by
+                 amendments to the 10646 standard from time
+                 to time, implementations must be prepared to
+                 encounter any code point from 0x00000000 to
+                 0x7fffffff.  Byte sequences that do not
+                 correspond to the valid UTF-8 encoding of a
+                 code point or are outside this range are
+                 prohibited.
+
+                 The use of control codes should be avoided.
+
+                 When it is necessary to represent a newline,
+                 the control code sequence CR LF should be used.
+
+                 The use of leading or trailing white space should
+                 be avoided.
+
+                 For code points not directly supported by user
+                 interface hardware or software, an alternative
+                 means of entry and display, such as hexadecimal,
+                 may be provided.
+
+                 For information encoded in 7-bit US-ASCII,
+                 the UTF-8 encoding is identical to the
+                 US-ASCII encoding.
+
+                 UTF-8 may require multiple bytes to represent a
+                 single character / code point; thus the length
+                 of this object in octets may be different from
+                 the number of characters encoded.  Similarly,
+                 size constraints refer to the number of encoded
+                 octets, not the number of characters represented
+                 by an encoding.
+
+                 Note that when this TC is used for an object that
+                 is used or envisioned to be used as an index, then
+                 a SIZE restriction MUST be specified so that the
+                 number of sub-identifiers for any object instance
+                 does not exceed the limit of 128, as defined by
+                 [RFC3416].
+
+                 Note that the size of an SnmpAdminString object is
+                 measured in octets, not characters.
+                "
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+-- Administrative assignments ***************************************
+
+snmpFrameworkAdmin
+    OBJECT IDENTIFIER ::= { snmpFrameworkMIB 1 }
+snmpFrameworkMIBObjects
+    OBJECT IDENTIFIER ::= { snmpFrameworkMIB 2 }
+snmpFrameworkMIBConformance
+    OBJECT IDENTIFIER ::= { snmpFrameworkMIB 3 }
+
+-- the snmpEngine Group ********************************************
+
+snmpEngine OBJECT IDENTIFIER ::= { snmpFrameworkMIBObjects 1 }
+
+snmpEngineID     OBJECT-TYPE
+    SYNTAX       SnmpEngineID
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "An SNMP engine's administratively-unique identifier.
+
+                 This information SHOULD be stored in non-volatile
+                 storage so that it remains constant across
+                 re-initializations of the SNMP engine.
+                "
+    ::= { snmpEngine 1 }
+
+snmpEngineBoots  OBJECT-TYPE
+    SYNTAX       INTEGER (1..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of times that the SNMP engine has
+                 (re-)initialized itself since snmpEngineID
+                 was last configured.
+                "
+    ::= { snmpEngine 2 }
+
+snmpEngineTime   OBJECT-TYPE
+    SYNTAX       INTEGER (0..2147483647)
+    UNITS        "seconds"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The number of seconds since the value of
+                 the snmpEngineBoots object last changed.
+                 When incrementing this object's value would
+                 cause it to exceed its maximum,
+                 snmpEngineBoots is incremented as if a
+                 re-initialization had occurred, and this
+                 object's value consequently reverts to zero.
+                "
+    ::= { snmpEngine 3 }
+
+snmpEngineMaxMessageSize OBJECT-TYPE
+    SYNTAX       INTEGER (484..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The maximum length in octets of an SNMP message
+                 which this SNMP engine can send or receive and
+                 process, determined as the minimum of the maximum
+                 message size values supported among all of the
+                 transports available to and supported by the engine.
+                "
+    ::= { snmpEngine 4 }
+
+-- Registration Points for Authentication and Privacy Protocols **
+
+snmpAuthProtocols OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "Registration point for standards-track
+                  authentication protocols used in SNMP Management
+                  Frameworks.
+                 "
+    ::= { snmpFrameworkAdmin 1 }
+
+snmpPrivProtocols OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "Registration point for standards-track privacy
+                  protocols used in SNMP Management Frameworks.
+                 "
+    ::= { snmpFrameworkAdmin 2 }
+
+-- Conformance information ******************************************
+
+snmpFrameworkMIBCompliances
+               OBJECT IDENTIFIER ::= {snmpFrameworkMIBConformance 1}
+snmpFrameworkMIBGroups
+               OBJECT IDENTIFIER ::= {snmpFrameworkMIBConformance 2}
+
+-- compliance statements
+
+snmpFrameworkMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "The compliance statement for SNMP engines which
+                 implement the SNMP Management Framework MIB.
+                "
+    MODULE    -- this module
+        MANDATORY-GROUPS { snmpEngineGroup }
+    ::= { snmpFrameworkMIBCompliances 1 }
+
+-- units of conformance
+
+snmpEngineGroup OBJECT-GROUP
+    OBJECTS {
+              snmpEngineID,
+              snmpEngineBoots,
+              snmpEngineTime,
+              snmpEngineMaxMessageSize
+            }
+    STATUS       current
+    DESCRIPTION "A collection of objects for identifying and
+                 determining the configuration and current timeliness
+
+                 values of an SNMP engine.
+                "
+    ::= { snmpFrameworkMIBGroups 1 }
+
+END
diff --git a/share/snmp/SNMP-USER-BASED-SM-MIB.txt b/share/snmp/SNMP-USER-BASED-SM-MIB.txt
new file mode 100644
index 00000000000..3b714030c1d
--- /dev/null
+++ b/share/snmp/SNMP-USER-BASED-SM-MIB.txt
@@ -0,0 +1,912 @@
+SNMP-USER-BASED-SM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    OBJECT-IDENTITY,
+    snmpModules, Counter32                FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, TestAndIncr,
+    RowStatus, RowPointer,
+    StorageType, AutonomousType           FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP       FROM SNMPv2-CONF
+    SnmpAdminString, SnmpEngineID,
+    snmpAuthProtocols, snmpPrivProtocols  FROM SNMP-FRAMEWORK-MIB;
+
+snmpUsmMIB MODULE-IDENTITY
+    LAST-UPDATED "200210160000Z"            -- 16 Oct 2002, midnight
+    ORGANIZATION "SNMPv3 Working Group"
+    CONTACT-INFO "WG-email:   snmpv3@lists.tislabs.com
+                  Subscribe:  majordomo@lists.tislabs.com
+                              In msg body:  subscribe snmpv3
+
+                  Chair:      Russ Mundy
+                              Network Associates Laboratories
+                  postal:     15204 Omega Drive, Suite 300
+                              Rockville, MD 20850-4601
+                              USA
+                  email:      mundy@tislabs.com
+
+                  phone:      +1 301-947-7107
+
+                  Co-Chair:   David Harrington
+                              Enterasys Networks
+                  Postal:     35 Industrial Way
+                              P. O. Box 5004
+                              Rochester, New Hampshire 03866-5005
+                              USA
+                  EMail:      dbh@enterasys.com
+                  Phone:      +1 603-337-2614
+
+                  Co-editor   Uri Blumenthal
+                              Lucent Technologies
+                  postal:     67 Whippany Rd.
+                              Whippany, NJ 07981
+                              USA
+                  email:      uri@lucent.com
+                  phone:      +1-973-386-2163
+
+                  Co-editor:  Bert Wijnen
+                              Lucent Technologies
+                  postal:     Schagen 33
+                              3461 GL Linschoten
+                              Netherlands
+                  email:      bwijnen@lucent.com
+                  phone:      +31-348-480-685
+                 "
+    DESCRIPTION  "The management information definitions for the
+                  SNMP User-based Security Model.
+
+                  Copyright (C) The Internet Society (2002). This
+                  version of this MIB module is part of RFC 3414;
+                  see the RFC itself for full legal notices.
+                 "
+--  Revision history
+
+    REVISION     "200210160000Z"          -- 16 Oct 2002, midnight
+    DESCRIPTION  "Changes in this revision:
+                  - Updated references and contact info.
+                  - Clarification to usmUserCloneFrom DESCRIPTION
+                    clause
+                  - Fixed 'command responder' into 'command generator'
+                    in last para of DESCRIPTION clause of
+                    usmUserTable.
+                  This revision published as RFC3414.
+                 "
+    REVISION     "199901200000Z"          -- 20 Jan 1999, midnight
+    DESCRIPTION  "Clarifications, published as RFC2574"
+
+    REVISION     "199711200000Z"          -- 20 Nov 1997, midnight
+    DESCRIPTION  "Initial version, published as RFC2274"
+    ::= { snmpModules 15 }
+
+-- Administrative assignments ****************************************
+
+usmMIBObjects     OBJECT IDENTIFIER ::= { snmpUsmMIB 1 }
+usmMIBConformance OBJECT IDENTIFIER ::= { snmpUsmMIB 2 }
+
+-- Identification of Authentication and Privacy Protocols ************
+
+usmNoAuthProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "No Authentication Protocol."
+    ::= { snmpAuthProtocols 1 }
+
+usmHMACMD5AuthProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The HMAC-MD5-96 Digest Authentication Protocol."
+    REFERENCE    "- H. Krawczyk, M. Bellare, R. Canetti HMAC:
+                    Keyed-Hashing for Message Authentication,
+                    RFC2104, Feb 1997.
+                  - Rivest, R., Message Digest Algorithm MD5, RFC1321.
+                 "
+    ::= { snmpAuthProtocols 2 }
+
+usmHMACSHAAuthProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The HMAC-SHA-96 Digest Authentication Protocol."
+    REFERENCE    "- H. Krawczyk, M. Bellare, R. Canetti, HMAC:
+                    Keyed-Hashing for Message Authentication,
+                    RFC2104, Feb 1997.
+                  - Secure Hash Algorithm. NIST FIPS 180-1.
+                 "
+    ::= { snmpAuthProtocols 3 }
+
+usmNoPrivProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "No Privacy Protocol."
+    ::= { snmpPrivProtocols 1 }
+
+usmDESPrivProtocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The CBC-DES Symmetric Encryption Protocol."
+    REFERENCE    "- Data Encryption Standard, National Institute of
+                    Standards and Technology.  Federal Information
+                    Processing Standard (FIPS) Publication 46-1.
+
+                    Supersedes FIPS Publication 46,
+                    (January, 1977; reaffirmed January, 1988).
+
+                  - Data Encryption Algorithm, American National
+                    Standards Institute.  ANSI X3.92-1981,
+                    (December, 1980).
+
+                  - DES Modes of Operation, National Institute of
+                    Standards and Technology.  Federal Information
+                    Processing Standard (FIPS) Publication 81,
+                    (December, 1980).
+
+                  - Data Encryption Algorithm - Modes of Operation,
+                    American National Standards Institute.
+                    ANSI X3.106-1983, (May 1983).
+                 "
+    ::= { snmpPrivProtocols 2 }
+
+-- Textual Conventions ***********************************************
+
+KeyChange ::=     TEXTUAL-CONVENTION
+   STATUS         current
+   DESCRIPTION
+         "Every definition of an object with this syntax must identify
+          a protocol P, a secret key K, and a hash algorithm H
+          that produces output of L octets.
+
+          The object's value is a manager-generated, partially-random
+          value which, when modified, causes the value of the secret
+          key K, to be modified via a one-way function.
+
+          The value of an instance of this object is the concatenation
+          of two components: first a 'random' component and then a
+          'delta' component.
+
+          The lengths of the random and delta components
+          are given by the corresponding value of the protocol P;
+          if P requires K to be a fixed length, the length of both the
+          random and delta components is that fixed length; if P
+          allows the length of K to be variable up to a particular
+          maximum length, the length of the random component is that
+          maximum length and the length of the delta component is any
+          length less than or equal to that maximum length.
+          For example, usmHMACMD5AuthProtocol requires K to be a fixed
+          length of 16 octets and L - of 16 octets.
+          usmHMACSHAAuthProtocol requires K to be a fixed length of
+          20 octets and L - of 20 octets. Other protocols may define
+          other sizes, as deemed appropriate.
+
+          When a requester wants to change the old key K to a new
+          key keyNew on a remote entity, the 'random' component is
+          obtained from either a true random generator, or from a
+          pseudorandom generator, and the 'delta' component is
+          computed as follows:
+
+           - a temporary variable is initialized to the existing value
+             of K;
+           - if the length of the keyNew is greater than L octets,
+             then:
+              - the random component is appended to the value of the
+                temporary variable, and the result is input to the
+                the hash algorithm H to produce a digest value, and
+                the temporary variable is set to this digest value;
+              - the value of the temporary variable is XOR-ed with
+                the first (next) L-octets (16 octets in case of MD5)
+                of the keyNew to produce the first (next) L-octets
+                (16 octets in case of MD5) of the 'delta' component.
+              - the above two steps are repeated until the unused
+                portion of the keyNew component is L octets or less,
+           - the random component is appended to the value of the
+             temporary variable, and the result is input to the
+             hash algorithm H to produce a digest value;
+           - this digest value, truncated if necessary to be the same
+             length as the unused portion of the keyNew, is XOR-ed
+             with the unused portion of the keyNew to produce the
+             (final portion of the) 'delta' component.
+
+           For example, using MD5 as the hash algorithm H:
+
+              iterations = (lenOfDelta - 1)/16; /* integer division */
+              temp = keyOld;
+              for (i = 0; i < iterations; i++) {
+                  temp = MD5 (temp || random);
+                  delta[i*16 .. (i*16)+15] =
+                         temp XOR keyNew[i*16 .. (i*16)+15];
+              }
+              temp = MD5 (temp || random);
+              delta[i*16 .. lenOfDelta-1] =
+                     temp XOR keyNew[i*16 .. lenOfDelta-1];
+
+          The 'random' and 'delta' components are then concatenated as
+          described above, and the resulting octet string is sent to
+          the recipient as the new value of an instance of this object.
+
+          At the receiver side, when an instance of this object is set
+          to a new value, then a new value of K is computed as follows:
+
+           - a temporary variable is initialized to the existing value
+             of K;
+           - if the length of the delta component is greater than L
+             octets, then:
+              - the random component is appended to the value of the
+                temporary variable, and the result is input to the
+                hash algorithm H to produce a digest value, and the
+                temporary variable is set to this digest value;
+              - the value of the temporary variable is XOR-ed with
+                the first (next) L-octets (16 octets in case of MD5)
+                of the delta component to produce the first (next)
+                L-octets (16 octets in case of MD5) of the new value
+                of K.
+              - the above two steps are repeated until the unused
+                portion of the delta component is L octets or less,
+           - the random component is appended to the value of the
+             temporary variable, and the result is input to the
+             hash algorithm H to produce a digest value;
+           - this digest value, truncated if necessary to be the same
+             length as the unused portion of the delta component, is
+             XOR-ed with the unused portion of the delta component to
+             produce the (final portion of the) new value of K.
+
+           For example, using MD5 as the hash algorithm H:
+
+              iterations = (lenOfDelta - 1)/16; /* integer division */
+              temp = keyOld;
+              for (i = 0; i < iterations; i++) {
+                  temp = MD5 (temp || random);
+                  keyNew[i*16 .. (i*16)+15] =
+                         temp XOR delta[i*16 .. (i*16)+15];
+              }
+              temp = MD5 (temp || random);
+              keyNew[i*16 .. lenOfDelta-1] =
+                     temp XOR delta[i*16 .. lenOfDelta-1];
+
+          The value of an object with this syntax, whenever it is
+          retrieved by the management protocol, is always the zero
+          length string.
+
+          Note that the keyOld and keyNew are the localized keys.
+
+          Note that it is probably wise that when an SNMP entity sends
+          a SetRequest to change a key, that it keeps a copy of the old
+          key until it has confirmed that the key change actually
+          succeeded.
+         "
+    SYNTAX       OCTET STRING
+
+-- Statistics for the User-based Security Model **********************
+
+usmStats         OBJECT IDENTIFIER ::= { usmMIBObjects 1 }
+
+usmStatsUnsupportedSecLevels OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they requested a
+                 securityLevel that was unknown to the SNMP engine
+                 or otherwise unavailable.
+                "
+    ::= { usmStats 1 }
+
+usmStatsNotInTimeWindows OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they appeared
+                 outside of the authoritative SNMP engine's window.
+                "
+    ::= { usmStats 2 }
+
+usmStatsUnknownUserNames OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they referenced a
+                 user that was not known to the SNMP engine.
+                "
+    ::= { usmStats 3 }
+
+usmStatsUnknownEngineIDs OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they referenced an
+                 snmpEngineID that was not known to the SNMP engine.
+                "
+    ::= { usmStats 4 }
+
+usmStatsWrongDigests OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they didn't
+                 contain the expected digest value.
+                "
+    ::= { usmStats 5 }
+
+usmStatsDecryptionErrors OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "The total number of packets received by the SNMP
+                 engine which were dropped because they could not be
+                 decrypted.
+                "
+    ::= { usmStats 6 }
+
+-- The usmUser Group ************************************************
+
+usmUser          OBJECT IDENTIFIER ::= { usmMIBObjects 2 }
+
+usmUserSpinLock  OBJECT-TYPE
+    SYNTAX       TestAndIncr
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "An advisory lock used to allow several cooperating
+                 Command Generator Applications to coordinate their
+                 use of facilities to alter secrets in the
+                 usmUserTable.
+                "
+    ::= { usmUser 1 }
+
+-- The table of valid users for the User-based Security Model ********
+
+usmUserTable     OBJECT-TYPE
+    SYNTAX       SEQUENCE OF UsmUserEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The table of users configured in the SNMP engine's
+                 Local Configuration Datastore (LCD).
+
+                 To create a new user (i.e., to instantiate a new
+                 conceptual row in this table), it is recommended to
+                 follow this procedure:
+
+                   1)  GET(usmUserSpinLock.0) and save in sValue.
+
+                   2)  SET(usmUserSpinLock.0=sValue,
+                           usmUserCloneFrom=templateUser,
+                           usmUserStatus=createAndWait)
+                       You should use a template user to clone from
+                       which has the proper auth/priv protocol defined.
+
+                 If the new user is to use privacy:
+
+                   3)  generate the keyChange value based on the secret
+                       privKey of the clone-from user and the secret key
+                       to be used for the new user. Let us call this
+                       pkcValue.
+                   4)  GET(usmUserSpinLock.0) and save in sValue.
+                   5)  SET(usmUserSpinLock.0=sValue,
+                           usmUserPrivKeyChange=pkcValue
+                           usmUserPublic=randomValue1)
+                   6)  GET(usmUserPulic) and check it has randomValue1.
+                       If not, repeat steps 4-6.
+
+                 If the new user will never use privacy:
+
+                   7)  SET(usmUserPrivProtocol=usmNoPrivProtocol)
+
+                 If the new user is to use authentication:
+
+                   8)  generate the keyChange value based on the secret
+                       authKey of the clone-from user and the secret key
+                       to be used for the new user. Let us call this
+                       akcValue.
+                   9)  GET(usmUserSpinLock.0) and save in sValue.
+                   10) SET(usmUserSpinLock.0=sValue,
+                           usmUserAuthKeyChange=akcValue
+                           usmUserPublic=randomValue2)
+                   11) GET(usmUserPulic) and check it has randomValue2.
+                       If not, repeat steps 9-11.
+
+                 If the new user will never use authentication:
+
+                   12) SET(usmUserAuthProtocol=usmNoAuthProtocol)
+
+                 Finally, activate the new user:
+
+                   13) SET(usmUserStatus=active)
+
+                 The new user should now be available and ready to be
+                 used for SNMPv3 communication. Note however that access
+                 to MIB data must be provided via configuration of the
+                 SNMP-VIEW-BASED-ACM-MIB.
+
+                 The use of usmUserSpinlock is to avoid conflicts with
+                 another SNMP command generator application which may
+                 also be acting on the usmUserTable.
+                "
+    ::= { usmUser 2 }
+
+usmUserEntry     OBJECT-TYPE
+    SYNTAX       UsmUserEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "A user configured in the SNMP engine's Local
+                 Configuration Datastore (LCD) for the User-based
+                 Security Model.
+                "
+    INDEX       { usmUserEngineID,
+                  usmUserName
+                }
+    ::= { usmUserTable 1 }
+
+UsmUserEntry ::= SEQUENCE
+    {
+        usmUserEngineID         SnmpEngineID,
+        usmUserName             SnmpAdminString,
+        usmUserSecurityName     SnmpAdminString,
+        usmUserCloneFrom        RowPointer,
+        usmUserAuthProtocol     AutonomousType,
+        usmUserAuthKeyChange    KeyChange,
+        usmUserOwnAuthKeyChange KeyChange,
+        usmUserPrivProtocol     AutonomousType,
+        usmUserPrivKeyChange    KeyChange,
+        usmUserOwnPrivKeyChange KeyChange,
+        usmUserPublic           OCTET STRING,
+        usmUserStorageType      StorageType,
+        usmUserStatus           RowStatus
+    }
+
+usmUserEngineID  OBJECT-TYPE
+    SYNTAX       SnmpEngineID
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "An SNMP engine's administratively-unique identifier.
+
+                 In a simple agent, this value is always that agent's
+                 own snmpEngineID value.
+
+                 The value can also take the value of the snmpEngineID
+                 of a remote SNMP engine with which this user can
+                 communicate.
+                "
+    ::= { usmUserEntry 1 }
+
+usmUserName      OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE(1..32))
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "A human readable string representing the name of
+                 the user.
+
+                 This is the (User-based Security) Model dependent
+                 security ID.
+                "
+    ::= { usmUserEntry 2 }
+
+usmUserSecurityName OBJECT-TYPE
+    SYNTAX       SnmpAdminString
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "A human readable string representing the user in
+                 Security Model independent format.
+
+                 The default transformation of the User-based Security
+                 Model dependent security ID to the securityName and
+                 vice versa is the identity function so that the
+                 securityName is the same as the userName.
+                "
+    ::= { usmUserEntry 3 }
+
+usmUserCloneFrom OBJECT-TYPE
+    SYNTAX       RowPointer
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "A pointer to another conceptual row in this
+                 usmUserTable.  The user in this other conceptual
+                 row is called the clone-from user.
+
+                 When a new user is created (i.e., a new conceptual
+                 row is instantiated in this table), the privacy and
+                 authentication parameters of the new user must be
+                 cloned from its clone-from user. These parameters are:
+                   - authentication protocol (usmUserAuthProtocol)
+                   - privacy protocol (usmUserPrivProtocol)
+                 They will be copied regardless of what the current
+                 value is.
+
+                 Cloning also causes the initial values of the secret
+                 authentication key (authKey) and the secret encryption
+
+                 key (privKey) of the new user to be set to the same
+                 values as the corresponding secrets of the clone-from
+                 user to allow the KeyChange process to occur as
+                 required during user creation.
+
+                 The first time an instance of this object is set by
+                 a management operation (either at or after its
+                 instantiation), the cloning process is invoked.
+                 Subsequent writes are successful but invoke no
+                 action to be taken by the receiver.
+                 The cloning process fails with an 'inconsistentName'
+                 error if the conceptual row representing the
+                 clone-from user does not exist or is not in an active
+                 state when the cloning process is invoked.
+
+                 When this object is read, the ZeroDotZero OID
+                 is returned.
+                "
+    ::= { usmUserEntry 4 }
+
+usmUserAuthProtocol OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An indication of whether messages sent on behalf of
+                 this user to/from the SNMP engine identified by
+                 usmUserEngineID, can be authenticated, and if so,
+                 the type of authentication protocol which is used.
+
+                 An instance of this object is created concurrently
+                 with the creation of any other object instance for
+                 the same user (i.e., as part of the processing of
+                 the set operation which creates the first object
+                 instance in the same conceptual row).
+
+                 If an initial set operation (i.e. at row creation time)
+                 tries to set a value for an unknown or unsupported
+                 protocol, then a 'wrongValue' error must be returned.
+
+                 The value will be overwritten/set when a set operation
+                 is performed on the corresponding instance of
+                 usmUserCloneFrom.
+
+                 Once instantiated, the value of such an instance of
+                 this object can only be changed via a set operation to
+                 the value of the usmNoAuthProtocol.
+
+                 If a set operation tries to change the value of an
+
+                 existing instance of this object to any value other
+                 than usmNoAuthProtocol, then an 'inconsistentValue'
+                 error must be returned.
+
+                 If a set operation tries to set the value to the
+                 usmNoAuthProtocol while the usmUserPrivProtocol value
+                 in the same row is not equal to usmNoPrivProtocol,
+                 then an 'inconsistentValue' error must be returned.
+                 That means that an SNMP command generator application
+                 must first ensure that the usmUserPrivProtocol is set
+                 to the usmNoPrivProtocol value before it can set
+                 the usmUserAuthProtocol value to usmNoAuthProtocol.
+                "
+    DEFVAL      { usmNoAuthProtocol }
+    ::= { usmUserEntry 5 }
+
+usmUserAuthKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange   -- typically (SIZE (0 | 32)) for HMACMD5
+                             -- typically (SIZE (0 | 40)) for HMACSHA
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An object, which when modified, causes the secret
+                 authentication key used for messages sent on behalf
+                 of this user to/from the SNMP engine identified by
+                 usmUserEngineID, to be modified via a one-way
+                 function.
+
+                 The associated protocol is the usmUserAuthProtocol.
+                 The associated secret key is the user's secret
+                 authentication key (authKey). The associated hash
+                 algorithm is the algorithm used by the user's
+                 usmUserAuthProtocol.
+
+                 When creating a new user, it is an 'inconsistentName'
+                 error for a set operation to refer to this object
+                 unless it is previously or concurrently initialized
+                 through a set operation on the corresponding instance
+                 of usmUserCloneFrom.
+
+                 When the value of the corresponding usmUserAuthProtocol
+                 is usmNoAuthProtocol, then a set is successful, but
+                 effectively is a no-op.
+
+                 When this object is read, the zero-length (empty)
+                 string is returned.
+
+                 The recommended way to do a key change is as follows:
+
+                   1) GET(usmUserSpinLock.0) and save in sValue.
+                   2) generate the keyChange value based on the old
+                      (existing) secret key and the new secret key,
+                      let us call this kcValue.
+
+                 If you do the key change on behalf of another user:
+
+                   3) SET(usmUserSpinLock.0=sValue,
+                          usmUserAuthKeyChange=kcValue
+                          usmUserPublic=randomValue)
+
+                 If you do the key change for yourself:
+
+                   4) SET(usmUserSpinLock.0=sValue,
+                          usmUserOwnAuthKeyChange=kcValue
+                          usmUserPublic=randomValue)
+
+                 If you get a response with error-status of noError,
+                 then the SET succeeded and the new key is active.
+                 If you do not get a response, then you can issue a
+                 GET(usmUserPublic) and check if the value is equal
+                 to the randomValue you did send in the SET. If so, then
+                 the key change succeeded and the new key is active
+                 (probably the response got lost). If not, then the SET
+                 request probably never reached the target and so you
+                 can start over with the procedure above.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 6 }
+
+usmUserOwnAuthKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange   -- typically (SIZE (0 | 32)) for HMACMD5
+                             -- typically (SIZE (0 | 40)) for HMACSHA
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Behaves exactly as usmUserAuthKeyChange, with one
+                 notable difference: in order for the set operation
+                 to succeed, the usmUserName of the operation
+                 requester must match the usmUserName that
+                 indexes the row which is targeted by this
+                 operation.
+                 In addition, the USM security model must be
+                 used for this operation.
+
+                 The idea here is that access to this column can be
+                 public, since it will only allow a user to change
+                 his own secret authentication key (authKey).
+                 Note that this can only be done once the row is active.
+
+                 When a set is received and the usmUserName of the
+                 requester is not the same as the umsUserName that
+                 indexes the row which is targeted by this operation,
+                 then a 'noAccess' error must be returned.
+
+                 When a set is received and the security model in use
+                 is not USM, then a 'noAccess' error must be returned.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 7 }
+
+usmUserPrivProtocol OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An indication of whether messages sent on behalf of
+                 this user to/from the SNMP engine identified by
+                 usmUserEngineID, can be protected from disclosure,
+                 and if so, the type of privacy protocol which is used.
+
+                 An instance of this object is created concurrently
+                 with the creation of any other object instance for
+                 the same user (i.e., as part of the processing of
+                 the set operation which creates the first object
+                 instance in the same conceptual row).
+
+                 If an initial set operation (i.e. at row creation time)
+                 tries to set a value for an unknown or unsupported
+                 protocol, then a 'wrongValue' error must be returned.
+
+                 The value will be overwritten/set when a set operation
+                 is performed on the corresponding instance of
+                 usmUserCloneFrom.
+
+                 Once instantiated, the value of such an instance of
+                 this object can only be changed via a set operation to
+                 the value of the usmNoPrivProtocol.
+
+                 If a set operation tries to change the value of an
+                 existing instance of this object to any value other
+                 than usmNoPrivProtocol, then an 'inconsistentValue'
+                 error must be returned.
+
+                 Note that if any privacy protocol is used, then you
+                 must also use an authentication protocol. In other
+                 words, if usmUserPrivProtocol is set to anything else
+                 than usmNoPrivProtocol, then the corresponding instance
+                 of usmUserAuthProtocol cannot have a value of
+
+                 usmNoAuthProtocol. If it does, then an
+                 'inconsistentValue' error must be returned.
+                "
+    DEFVAL      { usmNoPrivProtocol }
+    ::= { usmUserEntry 8 }
+
+usmUserPrivKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange  -- typically (SIZE (0 | 32)) for DES
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "An object, which when modified, causes the secret
+                 encryption key used for messages sent on behalf
+                 of this user to/from the SNMP engine identified by
+                 usmUserEngineID, to be modified via a one-way
+                 function.
+
+                 The associated protocol is the usmUserPrivProtocol.
+                 The associated secret key is the user's secret
+                 privacy key (privKey). The associated hash
+                 algorithm is the algorithm used by the user's
+                 usmUserAuthProtocol.
+
+                 When creating a new user, it is an 'inconsistentName'
+                 error for a set operation to refer to this object
+                 unless it is previously or concurrently initialized
+                 through a set operation on the corresponding instance
+                 of usmUserCloneFrom.
+
+                 When the value of the corresponding usmUserPrivProtocol
+                 is usmNoPrivProtocol, then a set is successful, but
+                 effectively is a no-op.
+
+                 When this object is read, the zero-length (empty)
+                 string is returned.
+                 See the description clause of usmUserAuthKeyChange for
+                 a recommended procedure to do a key change.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 9 }
+
+usmUserOwnPrivKeyChange OBJECT-TYPE
+    SYNTAX       KeyChange  -- typically (SIZE (0 | 32)) for DES
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Behaves exactly as usmUserPrivKeyChange, with one
+                 notable difference: in order for the Set operation
+                 to succeed, the usmUserName of the operation
+                 requester must match the usmUserName that indexes
+
+                 the row which is targeted by this operation.
+                 In addition, the USM security model must be
+                 used for this operation.
+
+                 The idea here is that access to this column can be
+                 public, since it will only allow a user to change
+                 his own secret privacy key (privKey).
+                 Note that this can only be done once the row is active.
+
+                 When a set is received and the usmUserName of the
+                 requester is not the same as the umsUserName that
+                 indexes the row which is targeted by this operation,
+                 then a 'noAccess' error must be returned.
+
+                 When a set is received and the security model in use
+                 is not USM, then a 'noAccess' error must be returned.
+                "
+    DEFVAL      { ''H }    -- the empty string
+    ::= { usmUserEntry 10 }
+
+usmUserPublic    OBJECT-TYPE
+    SYNTAX       OCTET STRING (SIZE(0..32))
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "A publicly-readable value which can be written as part
+                 of the procedure for changing a user's secret
+                 authentication and/or privacy key, and later read to
+                 determine whether the change of the secret was
+                 effected.
+                "
+    DEFVAL      { ''H }  -- the empty string
+    ::= { usmUserEntry 11 }
+
+usmUserStorageType OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The storage type for this conceptual row.
+
+                 Conceptual rows having the value 'permanent' must
+                 allow write-access at a minimum to:
+
+                 - usmUserAuthKeyChange, usmUserOwnAuthKeyChange
+                   and usmUserPublic for a user who employs
+                   authentication, and
+                 - usmUserPrivKeyChange, usmUserOwnPrivKeyChange
+                   and usmUserPublic for a user who employs
+                   privacy.
+
+                 Note that any user who employs authentication or
+                 privacy must allow its secret(s) to be updated and
+                 thus cannot be 'readOnly'.
+
+                 If an initial set operation tries to set the value to
+                 'readOnly' for a user who employs authentication or
+                 privacy, then an 'inconsistentValue' error must be
+                 returned.  Note that if the value has been previously
+                 set (implicit or explicit) to any value, then the rules
+                 as defined in the StorageType Textual Convention apply.
+
+                 It is an implementation issue to decide if a SET for
+                 a readOnly or permanent row is accepted at all. In some
+                 contexts this may make sense, in others it may not. If
+                 a SET for a readOnly or permanent row is not accepted
+                 at all, then a 'wrongValue' error must be returned.
+                "
+    DEFVAL      { nonVolatile }
+    ::= { usmUserEntry 12 }
+
+usmUserStatus    OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "The status of this conceptual row.
+
+                 Until instances of all corresponding columns are
+                 appropriately configured, the value of the
+                 corresponding instance of the usmUserStatus column
+                 is 'notReady'.
+
+                 In particular, a newly created row for a user who
+                 employs authentication, cannot be made active until the
+                 corresponding usmUserCloneFrom and usmUserAuthKeyChange
+                 have been set.
+
+                 Further, a newly created row for a user who also
+                 employs privacy, cannot be made active until the
+                 usmUserPrivKeyChange has been set.
+
+                 The RowStatus TC [RFC2579] requires that this
+                 DESCRIPTION clause states under which circumstances
+                 other objects in this row can be modified:
+
+                 The value of this object has no effect on whether
+                 other objects in this conceptual row can be modified,
+                 except for usmUserOwnAuthKeyChange and
+                 usmUserOwnPrivKeyChange. For these 2 objects, the
+
+                 value of usmUserStatus MUST be active.
+                "
+    ::= { usmUserEntry 13 }
+
+-- Conformance Information *******************************************
+
+usmMIBCompliances OBJECT IDENTIFIER ::= { usmMIBConformance 1 }
+usmMIBGroups      OBJECT IDENTIFIER ::= { usmMIBConformance 2 }
+
+-- Compliance statements
+
+usmMIBCompliance MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION "The compliance statement for SNMP engines which
+                 implement the SNMP-USER-BASED-SM-MIB.
+                "
+
+    MODULE       -- this module
+        MANDATORY-GROUPS { usmMIBBasicGroup }
+
+        OBJECT           usmUserAuthProtocol
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+
+        OBJECT           usmUserPrivProtocol
+        MIN-ACCESS       read-only
+        DESCRIPTION     "Write access is not required."
+    ::= { usmMIBCompliances 1 }
+
+-- Units of compliance
+usmMIBBasicGroup OBJECT-GROUP
+    OBJECTS     {
+                  usmStatsUnsupportedSecLevels,
+                  usmStatsNotInTimeWindows,
+                  usmStatsUnknownUserNames,
+                  usmStatsUnknownEngineIDs,
+                  usmStatsWrongDigests,
+                  usmStatsDecryptionErrors,
+                  usmUserSpinLock,
+                  usmUserSecurityName,
+                  usmUserCloneFrom,
+                  usmUserAuthProtocol,
+                  usmUserAuthKeyChange,
+                  usmUserOwnAuthKeyChange,
+                  usmUserPrivProtocol,
+                  usmUserPrivKeyChange,
+                  usmUserOwnPrivKeyChange,
+                  usmUserPublic,
+                  usmUserStorageType,
+                  usmUserStatus
+                }
+    STATUS       current
+    DESCRIPTION "A collection of objects providing for configuration
+                 of an SNMP engine which implements the SNMP
+                 User-based Security Model.
+                "
+    ::= { usmMIBGroups 1 }
+
+END
diff --git a/share/snmp/SNMP-USM-AES-MIB.txt b/share/snmp/SNMP-USM-AES-MIB.txt
new file mode 100644
index 00000000000..4c17302194c
--- /dev/null
+++ b/share/snmp/SNMP-USM-AES-MIB.txt
@@ -0,0 +1,62 @@
+SNMP-USM-AES-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-IDENTITY,
+        snmpModules             FROM SNMPv2-SMI          -- [RFC2578]
+        snmpPrivProtocols       FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]
+
+snmpUsmAesMIB  MODULE-IDENTITY
+    LAST-UPDATED "200406140000Z"
+    ORGANIZATION "IETF"
+    CONTACT-INFO "Uri Blumenthal
+                  Lucent Technologies / Bell Labs
+                  67 Whippany Rd.
+                  14D-318
+                  Whippany, NJ  07981, USA
+                  973-386-2163
+                  uri@bell-labs.com
+
+                  Fabio Maino
+                  Andiamo Systems, Inc.
+                  375 East Tasman Drive
+                  San Jose, CA  95134, USA
+                  408-853-7530
+                  fmaino@andiamo.com
+
+                  Keith McCloghrie
+                  Cisco Systems, Inc.
+                  170 West Tasman Drive
+                  San Jose, CA  95134-1706, USA
+
+                  408-526-5260
+                  kzm@cisco.com"
+    DESCRIPTION  "Definitions of Object Identities needed for
+                  the use of AES by SNMP's User-based Security
+                  Model.
+
+                  Copyright (C) The Internet Society (2004).
+
+            This version of this MIB module is part of RFC 3826;
+            see the RFC itself for full legal notices.
+            Supplementary information may be available on
+            http://www.ietf.org/copyrights/ianamib.html."
+
+    REVISION     "200406140000Z"
+    DESCRIPTION  "Initial version, published as RFC3826"
+    ::= { snmpModules 20 }
+
+usmAesCfb128Protocol OBJECT-IDENTITY
+    STATUS        current
+    DESCRIPTION  "The CFB128-AES-128 Privacy Protocol."
+    REFERENCE    "- Specification for the ADVANCED ENCRYPTION
+                    STANDARD. Federal Information Processing
+                    Standard (FIPS) Publication 197.
+                    (November 2001).
+
+                  - Dworkin, M., NIST Recommendation for Block
+                    Cipher Modes of Operation, Methods and
+                    Techniques. NIST Special Publication 800-38A
+                    (December 2001).
+                 "
+    ::= { snmpPrivProtocols 4 }
+
+END
diff --git a/share/snmp/SNMP-USM-HMAC-SHA2-MIB.txt b/share/snmp/SNMP-USM-HMAC-SHA2-MIB.txt
new file mode 100644
index 00000000000..ea31f416954
--- /dev/null
+++ b/share/snmp/SNMP-USM-HMAC-SHA2-MIB.txt
@@ -0,0 +1,103 @@
+ SNMP-USM-HMAC-SHA2-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+       MODULE-IDENTITY, OBJECT-IDENTITY,
+           mib-2 FROM SNMPv2-SMI -- RFC 2578
+           snmpAuthProtocols FROM SNMP-FRAMEWORK-MIB; -- RFC 3411
+
+snmpUsmHmacSha2MIB MODULE-IDENTITY
+    LAST-UPDATED    "201604180000Z" -- 18 April 2016, midnight
+    ORGANIZATION    "SNMPv3 Working Group"
+    CONTACT-INFO    "WG email: OPSAWG@ietf.org
+                    Subscribe:
+                        https://www.ietf.org/mailman/listinfo/opsawg
+                    Editor:    Johannes Merkle
+                               secunet Security Networks
+                    Postal:    Mergenthaler Allee 77
+                               D-65760 Eschborn
+                               Germany
+                    Phone:     +49 20154543091
+                    Email:     johannes.merkle@secunet.com
+
+                    Co-Editor: Manfred Lochter
+                               Bundesamt fuer Sicherheit in der
+                               Informationstechnik (BSI)
+                    Postal:    Postfach 200363
+                               D-53133 Bonn
+                               Germany
+                    Phone:     +49 228 9582 5643
+                    Email:     manfred.lochter@bsi.bund.de"
+    DESCRIPTION
+        "Definitions of Object Identities needed for the use of
+        HMAC-SHA2 Authentication Protocols by SNMP's User-based Security
+        Model.
+
+        Copyright (c) 2016 IETF Trust and the persons identified as
+        authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, is permitted pursuant to, and subject
+        to the license terms contained in, the Simplified BSD License
+        set forth in Section 4.c of the IETF Trust's Legal Provisions
+
+        Relating to IETF Documents
+        (http://trustee.ietf.org/license-info)."
+
+    REVISION "201604180000Z" -- 18 April 2016, midnight
+    DESCRIPTION
+        "Version correcting the MODULE-IDENTITY value,
+        published as RFC 7860"
+
+    REVISION "201510140000Z" -- 14 October 2015, midnight
+    DESCRIPTION
+        "Initial version, published as RFC 7630"
+    ::= { mib-2 235 }
+
+usmHMAC128SHA224AuthProtocol OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION "The Authentication Protocol
+                usmHMAC128SHA224AuthProtocol uses HMAC-SHA-224 and
+                truncates output to 128 bits."
+    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
+                HMAC: Keyed-Hashing for Message Authentication,
+                RFC 2104.
+                - National Institute of Standards and Technology,
+                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
+    ::= { snmpAuthProtocols 4 }
+
+usmHMAC192SHA256AuthProtocol OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION "The Authentication Protocol
+                usmHMAC192SHA256AuthProtocol uses HMAC-SHA-256 and
+                truncates output to 192 bits."
+    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
+                HMAC: Keyed-Hashing for Message Authentication,
+                RFC 2104.
+                - National Institute of Standards and Technology,
+                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
+    ::= { snmpAuthProtocols 5 }
+
+usmHMAC256SHA384AuthProtocol OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION "The Authentication Protocol
+                usmHMAC256SHA384AuthProtocol uses HMAC-SHA-384 and
+                truncates output to 256 bits."
+    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
+                HMAC: Keyed-Hashing for Message Authentication,
+                RFC 2104.
+                - National Institute of Standards and Technology,
+                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
+    ::= { snmpAuthProtocols 6 }
+
+usmHMAC384SHA512AuthProtocol OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION "The Authentication Protocol
+                usmHMAC384SHA512AuthProtocol uses HMAC-SHA-512 and
+                truncates output to 384 bits."
+    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
+                HMAC: Keyed-Hashing for Message Authentication,
+                RFC 2104.
+                - National Institute of Standards and Technology,
+                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
+    ::= { snmpAuthProtocols 7 }
+
+END
diff --git a/share/snmp/SNMPv2-CONF.txt b/share/snmp/SNMPv2-CONF.txt
new file mode 100644
index 00000000000..24a1eed95d6
--- /dev/null
+++ b/share/snmp/SNMPv2-CONF.txt
@@ -0,0 +1,322 @@
+SNMPv2-CONF DEFINITIONS ::= BEGIN
+
+IMPORTS ObjectName, NotificationName, ObjectSyntax
+                                               FROM SNMPv2-SMI;
+
+-- definitions for conformance groups
+
+OBJECT-GROUP MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  ObjectsPart
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+                  ReferPart
+
+    VALUE NOTATION ::=
+                  value(VALUE OBJECT IDENTIFIER)
+
+    ObjectsPart ::=
+                  "OBJECTS" "{" Objects "}"
+    Objects ::=
+                  Object
+                | Objects "," Object
+    Object ::=
+
+                  value(ObjectName)
+
+    Status ::=
+                  "current"
+                | "deprecated"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    -- a character string as defined in [2]
+    Text ::= value(IA5String)
+END
+
+-- more definitions for conformance groups
+
+NOTIFICATION-GROUP MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  NotificationsPart
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+                  ReferPart
+
+    VALUE NOTATION ::=
+                  value(VALUE OBJECT IDENTIFIER)
+
+    NotificationsPart ::=
+                  "NOTIFICATIONS" "{" Notifications "}"
+    Notifications ::=
+                  Notification
+                | Notifications "," Notification
+    Notification ::=
+                  value(NotificationName)
+
+    Status ::=
+                  "current"
+                | "deprecated"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    -- a character string as defined in [2]
+    Text ::= value(IA5String)
+END
+
+-- definitions for compliance statements
+
+MODULE-COMPLIANCE MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+                  ReferPart
+                  ModulePart
+
+    VALUE NOTATION ::=
+                  value(VALUE OBJECT IDENTIFIER)
+
+    Status ::=
+                  "current"
+                | "deprecated"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    ModulePart ::=
+                  Modules
+    Modules ::=
+                  Module
+                | Modules Module
+    Module ::=
+                  -- name of module --
+                  "MODULE" ModuleName
+                  MandatoryPart
+                  CompliancePart
+
+    ModuleName ::=
+                  -- identifier must start with uppercase letter
+                  identifier ModuleIdentifier
+                  -- must not be empty unless contained
+                  -- in MIB Module
+                | empty
+    ModuleIdentifier ::=
+                  value(OBJECT IDENTIFIER)
+                | empty
+
+    MandatoryPart ::=
+                  "MANDATORY-GROUPS" "{" Groups "}"
+                | empty
+
+    Groups ::=
+
+                  Group
+                | Groups "," Group
+    Group ::=
+                  value(OBJECT IDENTIFIER)
+
+    CompliancePart ::=
+                  Compliances
+                | empty
+
+    Compliances ::=
+                  Compliance
+                | Compliances Compliance
+    Compliance ::=
+                  ComplianceGroup
+                | Object
+
+    ComplianceGroup ::=
+                  "GROUP" value(OBJECT IDENTIFIER)
+                  "DESCRIPTION" Text
+
+    Object ::=
+                  "OBJECT" value(ObjectName)
+                  SyntaxPart
+                  WriteSyntaxPart
+                  AccessPart
+                  "DESCRIPTION" Text
+
+    -- must be a refinement for object's SYNTAX clause
+    SyntaxPart ::= "SYNTAX" Syntax
+                | empty
+
+    -- must be a refinement for object's SYNTAX clause
+    WriteSyntaxPart ::= "WRITE-SYNTAX" Syntax
+                | empty
+
+    Syntax ::=    -- Must be one of the following:
+                       -- a base type (or its refinement),
+                       -- a textual convention (or its refinement), or
+                       -- a BITS pseudo-type
+                  type
+                | "BITS" "{" NamedBits "}"
+
+    NamedBits ::= NamedBit
+                | NamedBits "," NamedBit
+
+    NamedBit ::= identifier "(" number ")" -- number is nonnegative
+
+    AccessPart ::=
+                  "MIN-ACCESS" Access
+                | empty
+    Access ::=
+                  "not-accessible"
+                | "accessible-for-notify"
+                | "read-only"
+                | "read-write"
+                | "read-create"
+
+    -- a character string as defined in [2]
+    Text ::= value(IA5String)
+END
+
+-- definitions for capabilities statements
+
+AGENT-CAPABILITIES MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  "PRODUCT-RELEASE" Text
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+                  ReferPart
+                  ModulePart
+
+    VALUE NOTATION ::=
+                  value(VALUE OBJECT IDENTIFIER)
+
+    Status ::=
+                  "current"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    ModulePart ::=
+                  Modules
+                | empty
+    Modules ::=
+                  Module
+                | Modules Module
+    Module ::=
+                  -- name of module --
+                  "SUPPORTS" ModuleName
+                  "INCLUDES" "{" Groups "}"
+                  VariationPart
+
+    ModuleName ::=
+
+                  -- identifier must start with uppercase letter
+                  identifier ModuleIdentifier
+    ModuleIdentifier ::=
+                  value(OBJECT IDENTIFIER)
+                | empty
+
+    Groups ::=
+                  Group
+                | Groups "," Group
+    Group ::=
+                  value(OBJECT IDENTIFIER)
+
+    VariationPart ::=
+                  Variations
+                | empty
+    Variations ::=
+                  Variation
+                | Variations Variation
+
+    Variation ::=
+                  ObjectVariation
+                | NotificationVariation
+
+    NotificationVariation ::=
+                  "VARIATION" value(NotificationName)
+                  AccessPart
+                  "DESCRIPTION" Text
+
+    ObjectVariation ::=
+                  "VARIATION" value(ObjectName)
+                  SyntaxPart
+                  WriteSyntaxPart
+                  AccessPart
+                  CreationPart
+                  DefValPart
+                  "DESCRIPTION" Text
+
+    -- must be a refinement for object's SYNTAX clause
+    SyntaxPart ::= "SYNTAX" Syntax
+                | empty
+
+    WriteSyntaxPart ::= "WRITE-SYNTAX" Syntax
+                | empty
+
+    Syntax ::=    -- Must be one of the following:
+                       -- a base type (or its refinement),
+                       -- a textual convention (or its refinement), or
+                       -- a BITS pseudo-type
+
+                  type
+                | "BITS" "{" NamedBits "}"
+
+    NamedBits ::= NamedBit
+                | NamedBits "," NamedBit
+
+    NamedBit ::= identifier "(" number ")" -- number is nonnegative
+
+    AccessPart ::=
+                  "ACCESS" Access
+                | empty
+
+    Access ::=
+                  "not-implemented"
+                -- only "not-implemented" for notifications
+                | "accessible-for-notify"
+                | "read-only"
+                | "read-write"
+                | "read-create"
+                -- following is for backward-compatibility only
+                | "write-only"
+
+    CreationPart ::=
+                  "CREATION-REQUIRES" "{" Cells "}"
+                | empty
+    Cells ::=
+                  Cell
+                | Cells "," Cell
+    Cell ::=
+                  value(ObjectName)
+
+    DefValPart ::= "DEFVAL" "{" Defvalue "}"
+                | empty
+
+    Defvalue ::=  -- must be valid for the object's syntax
+                  -- in this macro's SYNTAX clause, if present,
+                  -- or if not, in object's OBJECT-TYPE macro
+                  value(ObjectSyntax)
+                | "{" BitsValue "}"
+
+    BitsValue ::= BitNames
+                | empty
+
+    BitNames ::=  BitName
+                | BitNames "," BitName
+
+    BitName ::= identifier
+
+    -- a character string as defined in [2]
+    Text ::= value(IA5String)
+END
+
+END
diff --git a/share/snmp/SNMPv2-MIB.txt b/share/snmp/SNMPv2-MIB.txt
new file mode 100644
index 00000000000..8c828305e06
--- /dev/null
+++ b/share/snmp/SNMPv2-MIB.txt
@@ -0,0 +1,854 @@
+SNMPv2-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+    TimeTicks, Counter32, snmpModules, mib-2
+        FROM SNMPv2-SMI
+    DisplayString, TestAndIncr, TimeStamp
+
+        FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF;
+
+snmpMIB MODULE-IDENTITY
+    LAST-UPDATED "200210160000Z"
+    ORGANIZATION "IETF SNMPv3 Working Group"
+    CONTACT-INFO
+            "WG-EMail:   snmpv3@lists.tislabs.com
+             Subscribe:  snmpv3-request@lists.tislabs.com
+
+             Co-Chair:   Russ Mundy
+                         Network Associates Laboratories
+             postal:     15204 Omega Drive, Suite 300
+                         Rockville, MD 20850-4601
+                         USA
+             EMail:      mundy@tislabs.com
+             phone:      +1 301 947-7107
+
+             Co-Chair:   David Harrington
+                         Enterasys Networks
+             postal:     35 Industrial Way
+                         P. O. Box 5005
+                         Rochester, NH 03866-5005
+                         USA
+             EMail:      dbh@enterasys.com
+             phone:      +1 603 337-2614
+
+             Editor:     Randy Presuhn
+                         BMC Software, Inc.
+             postal:     2141 North First Street
+                         San Jose, CA 95131
+                         USA
+             EMail:      randy_presuhn@bmc.com
+             phone:      +1 408 546-1006"
+    DESCRIPTION
+            "The MIB module for SNMP entities.
+
+             Copyright (C) The Internet Society (2002). This
+             version of this MIB module is part of RFC 3418;
+             see the RFC itself for full legal notices.
+            "
+    REVISION      "200210160000Z"
+    DESCRIPTION
+            "This revision of this MIB module was published as
+             RFC 3418."
+    REVISION      "199511090000Z"
+    DESCRIPTION
+            "This revision of this MIB module was published as
+             RFC 1907."
+    REVISION      "199304010000Z"
+    DESCRIPTION
+            "The initial revision of this MIB module was published
+            as RFC 1450."
+    ::= { snmpModules 1 }
+
+snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 }
+
+--  ::= { snmpMIBObjects 1 }        this OID is obsolete
+--  ::= { snmpMIBObjects 2 }        this OID is obsolete
+--  ::= { snmpMIBObjects 3 }        this OID is obsolete
+
+-- the System group
+--
+-- a collection of objects common to all managed systems.
+
+system   OBJECT IDENTIFIER ::= { mib-2 1 }
+
+sysDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual description of the entity.  This value should
+            include the full name and version identification of
+            the system's hardware type, software operating-system,
+            and networking software."
+    ::= { system 1 }
+
+sysObjectID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The vendor's authoritative identification of the
+            network management subsystem contained in the entity.
+            This value is allocated within the SMI enterprises
+            subtree (1.3.6.1.4.1) and provides an easy and
+            unambiguous means for determining `what kind of box' is
+            being managed.  For example, if vendor `Flintstones,
+            Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
+            it could assign the identifier 1.3.6.1.4.1.424242.1.1
+            to its `Fred Router'."
+    ::= { system 2 }
+
+sysUpTime OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The time (in hundredths of a second) since the
+            network management portion of the system was last
+            re-initialized."
+    ::= { system 3 }
+
+sysContact OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The textual identification of the contact person for
+            this managed node, together with information on how
+            to contact this person.  If no contact information is
+            known, the value is the zero-length string."
+    ::= { system 4 }
+
+sysName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "An administratively-assigned name for this managed
+            node.  By convention, this is the node's fully-qualified
+            domain name.  If the name is unknown, the value is
+            the zero-length string."
+    ::= { system 5 }
+
+sysLocation OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The physical location of this node (e.g., 'telephone
+            closet, 3rd floor').  If the location is unknown, the
+            value is the zero-length string."
+    ::= { system 6 }
+
+sysServices OBJECT-TYPE
+    SYNTAX      INTEGER (0..127)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A value which indicates the set of services that this
+            entity may potentially offer.  The value is a sum.
+
+            This sum initially takes the value zero. Then, for
+            each layer, L, in the range 1 through 7, that this node
+            performs transactions for, 2 raised to (L - 1) is added
+            to the sum.  For example, a node which performs only
+            routing functions would have a value of 4 (2^(3-1)).
+            In contrast, a node which is a host offering application
+            services would have a value of 72 (2^(4-1) + 2^(7-1)).
+            Note that in the context of the Internet suite of
+            protocols, values should be calculated accordingly:
+
+                 layer      functionality
+                   1        physical (e.g., repeaters)
+                   2        datalink/subnetwork (e.g., bridges)
+                   3        internet (e.g., supports the IP)
+                   4        end-to-end  (e.g., supports the TCP)
+                   7        applications (e.g., supports the SMTP)
+
+            For systems including OSI protocols, layers 5 and 6
+            may also be counted."
+    ::= { system 7 }
+
+-- object resource information
+--
+-- a collection of objects which describe the SNMP entity's
+-- (statically and dynamically configurable) support of
+-- various MIB modules.
+
+sysORLastChange OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the most recent
+            change in state or value of any instance of sysORID."
+    ::= { system 8 }
+
+sysORTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF SysOREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table listing the capabilities of
+            the local SNMP application acting as a command
+            responder with respect to various MIB modules.
+            SNMP entities having dynamically-configurable support
+            of MIB modules will have a dynamically-varying number
+            of conceptual rows."
+    ::= { system 9 }
+
+sysOREntry OBJECT-TYPE
+    SYNTAX     SysOREntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) in the sysORTable."
+    INDEX      { sysORIndex }
+    ::= { sysORTable 1 }
+
+SysOREntry ::= SEQUENCE {
+    sysORIndex     INTEGER,
+    sysORID        OBJECT IDENTIFIER,
+    sysORDescr     DisplayString,
+    sysORUpTime    TimeStamp
+}
+
+sysORIndex OBJECT-TYPE
+    SYNTAX     INTEGER (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The auxiliary variable used for identifying instances
+            of the columnar objects in the sysORTable."
+    ::= { sysOREntry 1 }
+
+sysORID OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "An authoritative identification of a capabilities
+            statement with respect to various MIB modules supported
+            by the local SNMP application acting as a command
+            responder."
+    ::= { sysOREntry 2 }
+
+sysORDescr OBJECT-TYPE
+    SYNTAX     DisplayString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "A textual description of the capabilities identified
+            by the corresponding instance of sysORID."
+    ::= { sysOREntry 3 }
+
+sysORUpTime OBJECT-TYPE
+    SYNTAX     TimeStamp
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The value of sysUpTime at the time this conceptual
+            row was last instantiated."
+    ::= { sysOREntry 4 }
+
+-- the SNMP group
+--
+-- a collection of objects providing basic instrumentation and
+-- control of an SNMP entity.
+
+snmp     OBJECT IDENTIFIER ::= { mib-2 11 }
+
+snmpInPkts OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of messages delivered to the SNMP
+            entity from the transport service."
+    ::= { snmp 1 }
+
+snmpInBadVersions OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of SNMP messages which were delivered
+            to the SNMP entity and were for an unsupported SNMP
+            version."
+    ::= { snmp 3 }
+
+snmpInBadCommunityNames OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of community-based SNMP messages (for
+           example,  SNMPv1) delivered to the SNMP entity which
+           used an SNMP community name not known to said entity.
+           Also, implementations which authenticate community-based
+           SNMP messages using check(s) in addition to matching
+           the community name (for example, by also checking
+           whether the message originated from a transport address
+           allowed to use a specified community name) MAY include
+           in this value the number of messages which failed the
+           additional check(s).  It is strongly RECOMMENDED that
+
+           the documentation for any security model which is used
+           to authenticate community-based SNMP messages specify
+           the precise conditions that contribute to this value."
+    ::= { snmp 4 }
+
+snmpInBadCommunityUses OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of community-based SNMP messages (for
+           example, SNMPv1) delivered to the SNMP entity which
+           represented an SNMP operation that was not allowed for
+           the SNMP community named in the message.  The precise
+           conditions under which this counter is incremented
+           (if at all) depend on how the SNMP entity implements
+           its access control mechanism and how its applications
+           interact with that access control mechanism.  It is
+           strongly RECOMMENDED that the documentation for any
+           access control mechanism which is used to control access
+           to and visibility of MIB instrumentation specify the
+           precise conditions that contribute to this value."
+    ::= { snmp 5 }
+
+snmpInASNParseErrs OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of ASN.1 or BER errors encountered by
+            the SNMP entity when decoding received SNMP messages."
+    ::= { snmp 6 }
+
+snmpEnableAuthenTraps OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Indicates whether the SNMP entity is permitted to
+            generate authenticationFailure traps.  The value of this
+            object overrides any configuration information; as such,
+            it provides a means whereby all authenticationFailure
+            traps may be disabled.
+
+            Note that it is strongly recommended that this object
+            be stored in non-volatile memory so that it remains
+            constant across re-initializations of the network
+            management system."
+    ::= { snmp 30 }
+
+snmpSilentDrops OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+           "The total number of Confirmed Class PDUs (such as
+           GetRequest-PDUs, GetNextRequest-PDUs,
+           GetBulkRequest-PDUs, SetRequest-PDUs, and
+           InformRequest-PDUs) delivered to the SNMP entity which
+           were silently dropped because the size of a reply
+           containing an alternate Response Class PDU (such as a
+           Response-PDU) with an empty variable-bindings field
+           was greater than either a local constraint or the
+           maximum message size associated with the originator of
+           the request."
+    ::= { snmp 31 }
+
+snmpProxyDrops OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The total number of Confirmed Class PDUs
+            (such as GetRequest-PDUs, GetNextRequest-PDUs,
+            GetBulkRequest-PDUs, SetRequest-PDUs, and
+            InformRequest-PDUs) delivered to the SNMP entity which
+            were silently dropped because the transmission of
+            the (possibly translated) message to a proxy target
+            failed in a manner (other than a time-out) such that
+            no Response Class PDU (such as a Response-PDU) could
+            be returned."
+    ::= { snmp 32 }
+
+-- information for notifications
+--
+-- a collection of objects which allow the SNMP entity, when
+-- supporting a notification originator application,
+-- to be configured to generate SNMPv2-Trap-PDUs.
+
+snmpTrap       OBJECT IDENTIFIER ::= { snmpMIBObjects 4 }
+
+snmpTrapOID OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS accessible-for-notify
+    STATUS     current
+    DESCRIPTION
+            "The authoritative identification of the notification
+            currently being sent.  This variable occurs as
+            the second varbind in every SNMPv2-Trap-PDU and
+            InformRequest-PDU."
+    ::= { snmpTrap 1 }
+
+--  ::= { snmpTrap 2 }   this OID is obsolete
+
+snmpTrapEnterprise OBJECT-TYPE
+    SYNTAX     OBJECT IDENTIFIER
+    MAX-ACCESS accessible-for-notify
+    STATUS     current
+    DESCRIPTION
+            "The authoritative identification of the enterprise
+            associated with the trap currently being sent.  When an
+            SNMP proxy agent is mapping an RFC1157 Trap-PDU
+            into a SNMPv2-Trap-PDU, this variable occurs as the
+            last varbind."
+    ::= { snmpTrap 3 }
+
+--  ::= { snmpTrap 4 }   this OID is obsolete
+
+-- well-known traps
+
+snmpTraps      OBJECT IDENTIFIER ::= { snmpMIBObjects 5 }
+
+coldStart NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+            "A coldStart trap signifies that the SNMP entity,
+            supporting a notification originator application, is
+            reinitializing itself and that its configuration may
+            have been altered."
+    ::= { snmpTraps 1 }
+
+warmStart NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+            "A warmStart trap signifies that the SNMP entity,
+            supporting a notification originator application,
+            is reinitializing itself such that its configuration
+            is unaltered."
+    ::= { snmpTraps 2 }
+
+-- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 }
+-- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 }
+-- are defined in RFC 2863 [RFC2863]
+
+authenticationFailure NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+            "An authenticationFailure trap signifies that the SNMP
+             entity has received a protocol message that is not
+             properly authenticated.  While all implementations
+             of SNMP entities MAY be capable of generating this
+             trap, the snmpEnableAuthenTraps object indicates
+             whether this trap will be generated."
+    ::= { snmpTraps 5 }
+
+-- Note the egpNeighborLoss notification is defined
+-- as { snmpTraps 6 } in RFC 1213
+
+-- the set group
+--
+-- a collection of objects which allow several cooperating
+-- command generator applications to coordinate their use of the
+-- set operation.
+
+snmpSet        OBJECT IDENTIFIER ::= { snmpMIBObjects 6 }
+
+snmpSetSerialNo OBJECT-TYPE
+    SYNTAX     TestAndIncr
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "An advisory lock used to allow several cooperating
+            command generator applications to coordinate their
+            use of the SNMP set operation.
+
+            This object is used for coarse-grain coordination.
+            To achieve fine-grain coordination, one or more similar
+            objects might be defined within each MIB group, as
+            appropriate."
+    ::= { snmpSet 1 }
+
+-- conformance information
+
+snmpMIBConformance
+               OBJECT IDENTIFIER ::= { snmpMIB 2 }
+
+snmpMIBCompliances
+               OBJECT IDENTIFIER ::= { snmpMIBConformance 1 }
+snmpMIBGroups  OBJECT IDENTIFIER ::= { snmpMIBConformance 2 }
+
+-- compliance statements
+
+--    ::= { snmpMIBCompliances 1 }      this OID is obsolete
+snmpBasicCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities which
+            implement the SNMPv2 MIB.
+
+            This compliance statement is replaced by
+            snmpBasicComplianceRev2."
+    MODULE  -- this module
+        MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
+                           snmpBasicNotificationsGroup }
+
+        GROUP   snmpCommunityGroup
+        DESCRIPTION
+            "This group is mandatory for SNMPv2 entities which
+            support community-based authentication."
+    ::= { snmpMIBCompliances 2 }
+
+snmpBasicComplianceRev2 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which
+            implement this MIB module."
+    MODULE  -- this module
+        MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
+                           snmpBasicNotificationsGroup }
+
+        GROUP   snmpCommunityGroup
+        DESCRIPTION
+            "This group is mandatory for SNMP entities which
+            support community-based authentication."
+
+        GROUP   snmpWarmStartNotificationGroup
+        DESCRIPTION
+            "This group is mandatory for an SNMP entity which
+            supports command responder applications, and is
+            able to reinitialize itself such that its
+            configuration is unaltered."
+    ::= { snmpMIBCompliances 3 }
+
+-- units of conformance
+
+--  ::= { snmpMIBGroups 1 }           this OID is obsolete
+--  ::= { snmpMIBGroups 2 }           this OID is obsolete
+--  ::= { snmpMIBGroups 3 }           this OID is obsolete
+
+--  ::= { snmpMIBGroups 4 }           this OID is obsolete
+
+snmpGroup OBJECT-GROUP
+    OBJECTS { snmpInPkts,
+              snmpInBadVersions,
+              snmpInASNParseErrs,
+              snmpSilentDrops,
+              snmpProxyDrops,
+              snmpEnableAuthenTraps }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing basic instrumentation
+            and control of an SNMP entity."
+    ::= { snmpMIBGroups 8 }
+
+snmpCommunityGroup OBJECT-GROUP
+    OBJECTS { snmpInBadCommunityNames,
+              snmpInBadCommunityUses }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing basic instrumentation
+            of a SNMP entity which supports community-based
+            authentication."
+    ::= { snmpMIBGroups 9 }
+
+snmpSetGroup OBJECT-GROUP
+    OBJECTS { snmpSetSerialNo }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects which allow several cooperating
+            command generator applications to coordinate their
+            use of the set operation."
+    ::= { snmpMIBGroups 5 }
+
+systemGroup OBJECT-GROUP
+    OBJECTS { sysDescr, sysObjectID, sysUpTime,
+              sysContact, sysName, sysLocation,
+              sysServices,
+              sysORLastChange, sysORID,
+              sysORUpTime, sysORDescr }
+    STATUS  current
+    DESCRIPTION
+            "The system group defines objects which are common to all
+            managed systems."
+    ::= { snmpMIBGroups 6 }
+
+snmpBasicNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { coldStart, authenticationFailure }
+    STATUS        current
+    DESCRIPTION
+       "The basic notifications implemented by an SNMP entity
+        supporting command responder applications."
+    ::= { snmpMIBGroups 7 }
+
+snmpWarmStartNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS { warmStart }
+   STATUS        current
+   DESCRIPTION
+     "An additional notification for an SNMP entity supporting
+     command responder applications, if it is able to reinitialize
+     itself such that its configuration is unaltered."
+  ::= { snmpMIBGroups 11 }
+
+snmpNotificationGroup OBJECT-GROUP
+    OBJECTS { snmpTrapOID, snmpTrapEnterprise }
+    STATUS  current
+    DESCRIPTION
+            "These objects are required for entities
+            which support notification originator applications."
+    ::= { snmpMIBGroups 12 }
+
+-- definitions in RFC 1213 made obsolete by the inclusion of a
+-- subset of the snmp group in this MIB
+
+snmpOutPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Messages which were
+            passed from the SNMP protocol entity to the
+            transport service."
+    ::= { snmp 2 }
+
+-- { snmp 7 } is not used
+
+snmpInTooBigs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field was
+            `tooBig'."
+    ::= { snmp 8 }
+
+snmpInNoSuchNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field was
+            `noSuchName'."
+    ::= { snmp 9 }
+
+snmpInBadValues OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were
+            delivered to the SNMP protocol entity and for
+            which the value of the error-status field was
+            `badValue'."
+    ::= { snmp 10 }
+
+snmpInReadOnlys OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number valid SNMP PDUs which were delivered
+            to the SNMP protocol entity and for which the value
+            of the error-status field was `readOnly'.  It should
+            be noted that it is a protocol error to generate an
+            SNMP PDU which contains the value `readOnly' in the
+            error-status field, as such this object is provided
+            as a means of detecting incorrect implementations of
+            the SNMP."
+    ::= { snmp 11 }
+
+snmpInGenErrs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were delivered
+            to the SNMP protocol entity and for which the value
+            of the error-status field was `genErr'."
+    ::= { snmp 12 }
+
+snmpInTotalReqVars OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of MIB objects which have been
+            retrieved successfully by the SNMP protocol entity
+            as the result of receiving valid SNMP Get-Request
+            and Get-Next PDUs."
+    ::= { snmp 13 }
+
+snmpInTotalSetVars OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of MIB objects which have been
+            altered successfully by the SNMP protocol entity as
+            the result of receiving valid SNMP Set-Request PDUs."
+    ::= { snmp 14 }
+
+snmpInGetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Request PDUs which
+            have been accepted and processed by the SNMP
+            protocol entity."
+    ::= { snmp 15 }
+
+snmpInGetNexts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Next PDUs which have been
+            accepted and processed by the SNMP protocol entity."
+    ::= { snmp 16 }
+
+snmpInSetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Set-Request PDUs which
+            have been accepted and processed by the SNMP protocol
+            entity."
+    ::= { snmp 17 }
+
+snmpInGetResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Response PDUs which
+            have been accepted and processed by the SNMP protocol
+            entity."
+    ::= { snmp 18 }
+
+snmpInTraps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Trap PDUs which have been
+            accepted and processed by the SNMP protocol entity."
+    ::= { snmp 19 }
+
+snmpOutTooBigs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status field was `tooBig.'"
+    ::= { snmp 20 }
+
+snmpOutNoSuchNames OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status was `noSuchName'."
+    ::= { snmp 21 }
+
+snmpOutBadValues OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status field was `badValue'."
+    ::= { snmp 22 }
+
+-- { snmp 23 } is not used
+
+snmpOutGenErrs OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP PDUs which were generated
+            by the SNMP protocol entity and for which the value
+            of the error-status field was `genErr'."
+    ::= { snmp 24 }
+
+snmpOutGetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Request PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 25 }
+
+snmpOutGetNexts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Next PDUs which have
+            been generated by the SNMP protocol entity."
+    ::= { snmp 26 }
+
+snmpOutSetRequests OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Set-Request PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 27 }
+
+snmpOutGetResponses OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Get-Response PDUs which
+            have been generated by the SNMP protocol entity."
+    ::= { snmp 28 }
+
+snmpOutTraps OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      obsolete
+    DESCRIPTION
+            "The total number of SNMP Trap PDUs which have
+            been generated by the SNMP protocol entity."
+    ::= { snmp 29 }
+
+snmpObsoleteGroup OBJECT-GROUP
+    OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
+              snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
+              snmpInTotalReqVars, snmpInTotalSetVars,
+              snmpInGetRequests, snmpInGetNexts, snmpInSetRequests,
+              snmpInGetResponses, snmpInTraps, snmpOutTooBigs,
+              snmpOutNoSuchNames, snmpOutBadValues,
+              snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts,
+              snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps
+              }
+    STATUS  obsolete
+    DESCRIPTION
+            "A collection of objects from RFC 1213 made obsolete
+            by this MIB module."
+    ::= { snmpMIBGroups 10 }
+
+END
diff --git a/share/snmp/SNMPv2-SMI.txt b/share/snmp/SNMPv2-SMI.txt
new file mode 100644
index 00000000000..1c01e1dfcdc
--- /dev/null
+++ b/share/snmp/SNMPv2-SMI.txt
@@ -0,0 +1,344 @@
+SNMPv2-SMI DEFINITIONS ::= BEGIN
+
+-- the path to the root
+
+org            OBJECT IDENTIFIER ::= { iso 3 }  --  "iso" = 1
+dod            OBJECT IDENTIFIER ::= { org 6 }
+internet       OBJECT IDENTIFIER ::= { dod 1 }
+
+directory      OBJECT IDENTIFIER ::= { internet 1 }
+
+mgmt           OBJECT IDENTIFIER ::= { internet 2 }
+mib-2          OBJECT IDENTIFIER ::= { mgmt 1 }
+transmission   OBJECT IDENTIFIER ::= { mib-2 10 }
+
+experimental   OBJECT IDENTIFIER ::= { internet 3 }
+
+private        OBJECT IDENTIFIER ::= { internet 4 }
+enterprises    OBJECT IDENTIFIER ::= { private 1 }
+
+security       OBJECT IDENTIFIER ::= { internet 5 }
+
+snmpV2         OBJECT IDENTIFIER ::= { internet 6 }
+
+-- transport domains
+snmpDomains    OBJECT IDENTIFIER ::= { snmpV2 1 }
+
+-- transport proxies
+snmpProxys     OBJECT IDENTIFIER ::= { snmpV2 2 }
+
+-- module identities
+snmpModules    OBJECT IDENTIFIER ::= { snmpV2 3 }
+
+-- Extended UTCTime, to allow dates with four-digit years
+-- (Note that this definition of ExtUTCTime is not to be IMPORTed
+--  by MIB modules.)
+ExtUTCTime ::= OCTET STRING(SIZE(11 | 13))
+    -- format is YYMMDDHHMMZ or YYYYMMDDHHMMZ
+
+    --   where: YY   - last two digits of year (only years
+    --                 between 1900-1999)
+    --          YYYY - last four digits of the year (any year)
+    --          MM   - month (01 through 12)
+    --          DD   - day of month (01 through 31)
+    --          HH   - hours (00 through 23)
+    --          MM   - minutes (00 through 59)
+    --          Z    - denotes GMT (the ASCII character Z)
+    --
+    -- For example, "9502192015Z" and "199502192015Z" represent
+    -- 8:15pm GMT on 19 February 1995. Years after 1999 must use
+    -- the four digit year format. Years 1900-1999 may use the
+    -- two or four digit format.
+
+-- definitions for information modules
+
+MODULE-IDENTITY MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  "LAST-UPDATED" value(Update ExtUTCTime)
+                  "ORGANIZATION" Text
+                  "CONTACT-INFO" Text
+                  "DESCRIPTION" Text
+                  RevisionPart
+
+    VALUE NOTATION ::=
+                  value(VALUE OBJECT IDENTIFIER)
+
+    RevisionPart ::=
+                  Revisions
+                | empty
+    Revisions ::=
+                  Revision
+                | Revisions Revision
+    Revision ::=
+                  "REVISION" value(Update ExtUTCTime)
+                  "DESCRIPTION" Text
+
+    -- a character string as defined in section 3.1.1
+    Text ::= value(IA5String)
+END
+
+OBJECT-IDENTITY MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+
+                  ReferPart
+
+    VALUE NOTATION ::=
+                  value(VALUE OBJECT IDENTIFIER)
+
+    Status ::=
+                  "current"
+                | "deprecated"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    -- a character string as defined in section 3.1.1
+    Text ::= value(IA5String)
+END
+
+-- names of objects
+-- (Note that these definitions of ObjectName and NotificationName
+--  are not to be IMPORTed by MIB modules.)
+
+ObjectName ::=
+    OBJECT IDENTIFIER
+
+NotificationName ::=
+    OBJECT IDENTIFIER
+
+-- syntax of objects
+
+-- the "base types" defined here are:
+--   3 built-in ASN.1 types: INTEGER, OCTET STRING, OBJECT IDENTIFIER
+--   8 application-defined types: Integer32, IpAddress, Counter32,
+--              Gauge32, Unsigned32, TimeTicks, Opaque, and Counter64
+
+ObjectSyntax ::=
+    CHOICE {
+        simple
+            SimpleSyntax,
+          -- note that SEQUENCEs for conceptual tables and
+          -- rows are not mentioned here...
+
+        application-wide
+            ApplicationSyntax
+    }
+
+-- built-in ASN.1 types
+
+SimpleSyntax ::=
+    CHOICE {
+        -- INTEGERs with a more restrictive range
+        -- may also be used
+        integer-value               -- includes Integer32
+            INTEGER (-2147483648..2147483647),
+        -- OCTET STRINGs with a more restrictive size
+        -- may also be used
+        string-value
+            OCTET STRING (SIZE (0..65535)),
+        objectID-value
+            OBJECT IDENTIFIER
+    }
+
+-- indistinguishable from INTEGER, but never needs more than
+-- 32-bits for a two's complement representation
+Integer32 ::=
+        INTEGER (-2147483648..2147483647)
+
+-- application-wide types
+
+ApplicationSyntax ::=
+    CHOICE {
+        ipAddress-value
+            IpAddress,
+        counter-value
+            Counter32,
+        timeticks-value
+            TimeTicks,
+        arbitrary-value
+            Opaque,
+        big-counter-value
+            Counter64,
+        unsigned-integer-value  -- includes Gauge32
+            Unsigned32
+    }
+
+-- in network-byte order
+
+-- (this is a tagged type for historical reasons)
+IpAddress ::=
+    [APPLICATION 0]
+        IMPLICIT OCTET STRING (SIZE (4))
+
+-- this wraps
+Counter32 ::=
+    [APPLICATION 1]
+        IMPLICIT INTEGER (0..4294967295)
+
+-- this doesn't wrap
+Gauge32 ::=
+    [APPLICATION 2]
+        IMPLICIT INTEGER (0..4294967295)
+
+-- an unsigned 32-bit quantity
+-- indistinguishable from Gauge32
+Unsigned32 ::=
+    [APPLICATION 2]
+        IMPLICIT INTEGER (0..4294967295)
+
+-- hundredths of seconds since an epoch
+TimeTicks ::=
+    [APPLICATION 3]
+        IMPLICIT INTEGER (0..4294967295)
+
+-- for backward-compatibility only
+Opaque ::=
+    [APPLICATION 4]
+        IMPLICIT OCTET STRING
+
+-- for counters that wrap in less than one hour with only 32 bits
+Counter64 ::=
+    [APPLICATION 6]
+        IMPLICIT INTEGER (0..18446744073709551615)
+
+-- definition for objects
+
+OBJECT-TYPE MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  "SYNTAX" Syntax
+                  UnitsPart
+                  "MAX-ACCESS" Access
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+                  ReferPart
+
+                  IndexPart
+                  DefValPart
+
+    VALUE NOTATION ::=
+                  value(VALUE ObjectName)
+
+    Syntax ::=   -- Must be one of the following:
+                       -- a base type (or its refinement),
+                       -- a textual convention (or its refinement), or
+                       -- a BITS pseudo-type
+                   type
+                | "BITS" "{" NamedBits "}"
+
+    NamedBits ::= NamedBit
+                | NamedBits "," NamedBit
+
+    NamedBit ::=  identifier "(" number ")" -- number is nonnegative
+
+    UnitsPart ::=
+                  "UNITS" Text
+                | empty
+
+    Access ::=
+                  "not-accessible"
+                | "accessible-for-notify"
+                | "read-only"
+                | "read-write"
+                | "read-create"
+
+    Status ::=
+                  "current"
+                | "deprecated"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    IndexPart ::=
+                  "INDEX"    "{" IndexTypes "}"
+                | "AUGMENTS" "{" Entry      "}"
+                | empty
+    IndexTypes ::=
+                  IndexType
+                | IndexTypes "," IndexType
+    IndexType ::=
+                  "IMPLIED" Index
+                | Index
+
+    Index ::=
+                    -- use the SYNTAX value of the
+                    -- correspondent OBJECT-TYPE invocation
+                  value(ObjectName)
+    Entry ::=
+                    -- use the INDEX value of the
+                    -- correspondent OBJECT-TYPE invocation
+                  value(ObjectName)
+
+    DefValPart ::= "DEFVAL" "{" Defvalue "}"
+                | empty
+
+    Defvalue ::=  -- must be valid for the type specified in
+                  -- SYNTAX clause of same OBJECT-TYPE macro
+                  value(ObjectSyntax)
+                | "{" BitsValue "}"
+
+    BitsValue ::= BitNames
+                | empty
+
+    BitNames ::=  BitName
+                | BitNames "," BitName
+
+    BitName ::= identifier
+
+    -- a character string as defined in section 3.1.1
+    Text ::= value(IA5String)
+END
+
+-- definitions for notifications
+
+NOTIFICATION-TYPE MACRO ::=
+BEGIN
+    TYPE NOTATION ::=
+                  ObjectsPart
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+                  ReferPart
+
+    VALUE NOTATION ::=
+                  value(VALUE NotificationName)
+
+    ObjectsPart ::=
+                  "OBJECTS" "{" Objects "}"
+                | empty
+    Objects ::=
+                  Object
+
+                | Objects "," Object
+    Object ::=
+                  value(ObjectName)
+
+    Status ::=
+                  "current"
+                | "deprecated"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    -- a character string as defined in section 3.1.1
+    Text ::= value(IA5String)
+END
+
+-- definitions of administrative identifiers
+
+zeroDotZero    OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "A value used for null identifiers."
+    ::= { 0 0 }
+
+END
diff --git a/share/snmp/SNMPv2-TC.txt b/share/snmp/SNMPv2-TC.txt
new file mode 100644
index 00000000000..860bf71eeaa
--- /dev/null
+++ b/share/snmp/SNMPv2-TC.txt
@@ -0,0 +1,772 @@
+SNMPv2-TC DEFINITIONS ::= BEGIN
+
+IMPORTS
+    TimeTicks         FROM SNMPv2-SMI;
+
+-- definition of textual conventions
+
+TEXTUAL-CONVENTION MACRO ::=
+
+BEGIN
+    TYPE NOTATION ::=
+                  DisplayPart
+                  "STATUS" Status
+                  "DESCRIPTION" Text
+                  ReferPart
+                  "SYNTAX" Syntax
+
+    VALUE NOTATION ::=
+                   value(VALUE Syntax)      -- adapted ASN.1
+
+    DisplayPart ::=
+                  "DISPLAY-HINT" Text
+                | empty
+
+    Status ::=
+                  "current"
+                | "deprecated"
+                | "obsolete"
+
+    ReferPart ::=
+                  "REFERENCE" Text
+                | empty
+
+    -- a character string as defined in [2]
+    Text ::= value(IA5String)
+
+    Syntax ::=   -- Must be one of the following:
+                       -- a base type (or its refinement), or
+                       -- a BITS pseudo-type
+                  type
+                | "BITS" "{" NamedBits "}"
+
+    NamedBits ::= NamedBit
+                | NamedBits "," NamedBit
+
+    NamedBit ::=  identifier "(" number ")" -- number is nonnegative
+
+END
+
+DisplayString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       current
+    DESCRIPTION
+            "Represents textual information taken from the NVT ASCII
+
+            character set, as defined in pages 4, 10-11 of RFC 854.
+
+            To summarize RFC 854, the NVT ASCII repertoire specifies:
+
+              - the use of character codes 0-127 (decimal)
+
+              - the graphics characters (32-126) are interpreted as
+                US ASCII
+
+              - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
+                meanings specified in RFC 854
+
+              - the other 25 codes have no standard interpretation
+
+              - the sequence 'CR LF' means newline
+
+              - the sequence 'CR NUL' means carriage-return
+
+              - an 'LF' not preceded by a 'CR' means moving to the
+                same column on the next line.
+
+              - the sequence 'CR x' for any x other than LF or NUL is
+                illegal.  (Note that this also means that a string may
+                end with either 'CR LF' or 'CR NUL', but not with CR.)
+
+            Any object defined using this syntax may not exceed 255
+            characters in length."
+    SYNTAX       OCTET STRING (SIZE (0..255))
+
+PhysAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS       current
+    DESCRIPTION
+            "Represents media- or physical-level addresses."
+    SYNTAX       OCTET STRING
+
+MacAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS       current
+    DESCRIPTION
+            "Represents an 802 MAC address represented in the
+            `canonical' order defined by IEEE 802.1a, i.e., as if it
+            were transmitted least significant bit first, even though
+            802.5 (in contrast to other 802.x protocols) requires MAC
+            addresses to be transmitted most significant bit first."
+    SYNTAX       OCTET STRING (SIZE (6))
+
+TruthValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents a boolean value."
+    SYNTAX       INTEGER { true(1), false(2) }
+
+TestAndIncr ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents integer-valued information used for atomic
+            operations.  When the management protocol is used to specify
+            that an object instance having this syntax is to be
+            modified, the new value supplied via the management protocol
+            must precisely match the value presently held by the
+            instance.  If not, the management protocol set operation
+            fails with an error of `inconsistentValue'.  Otherwise, if
+            the current value is the maximum value of 2^31-1 (2147483647
+            decimal), then the value held by the instance is wrapped to
+            zero; otherwise, the value held by the instance is
+            incremented by one.  (Note that regardless of whether the
+            management protocol set operation succeeds, the variable-
+            binding in the request and response PDUs are identical.)
+
+            The value of the ACCESS clause for objects having this
+            syntax is either `read-write' or `read-create'.  When an
+            instance of a columnar object having this syntax is created,
+            any value may be supplied via the management protocol.
+
+            When the network management portion of the system is re-
+            initialized, the value of every object instance having this
+            syntax must either be incremented from its value prior to
+            the re-initialization, or (if the value prior to the re-
+            initialization is unknown) be set to a pseudo-randomly
+            generated value."
+    SYNTAX       INTEGER (0..2147483647)
+
+AutonomousType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents an independently extensible type identification
+            value.  It may, for example, indicate a particular sub-tree
+            with further MIB definitions, or define a particular type of
+            protocol or hardware."
+    SYNTAX       OBJECT IDENTIFIER
+
+InstancePointer ::= TEXTUAL-CONVENTION
+    STATUS       obsolete
+    DESCRIPTION
+            "A pointer to either a specific instance of a MIB object or
+            a conceptual row of a MIB table in the managed device.  In
+            the latter case, by convention, it is the name of the
+            particular instance of the first accessible columnar object
+            in the conceptual row.
+
+            The two uses of this textual convention are replaced by
+            VariablePointer and RowPointer, respectively."
+    SYNTAX       OBJECT IDENTIFIER
+
+VariablePointer ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "A pointer to a specific object instance.  For example,
+            sysContact.0 or ifInOctets.3."
+    SYNTAX       OBJECT IDENTIFIER
+
+RowPointer ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents a pointer to a conceptual row.  The value is the
+            name of the instance of the first accessible columnar object
+            in the conceptual row.
+
+            For example, ifIndex.3 would point to the 3rd row in the
+            ifTable (note that if ifIndex were not-accessible, then
+            ifDescr.3 would be used instead)."
+    SYNTAX       OBJECT IDENTIFIER
+
+RowStatus ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The RowStatus textual convention is used to manage the
+            creation and deletion of conceptual rows, and is used as the
+            value of the SYNTAX clause for the status column of a
+            conceptual row (as described in Section 7.7.1 of [2].)
+
+            The status column has six defined values:
+
+                 - `active', which indicates that the conceptual row is
+                 available for use by the managed device;
+
+                 - `notInService', which indicates that the conceptual
+                 row exists in the agent, but is unavailable for use by
+                 the managed device (see NOTE below); 'notInService' has
+                 no implication regarding the internal consistency of
+                 the row, availability of resources, or consistency with
+                 the current state of the managed device;
+
+                 - `notReady', which indicates that the conceptual row
+                 exists in the agent, but is missing information
+                 necessary in order to be available for use by the
+                 managed device (i.e., one or more required columns in
+                 the conceptual row have not been instanciated);
+
+                 - `createAndGo', which is supplied by a management
+                 station wishing to create a new instance of a
+                 conceptual row and to have its status automatically set
+                 to active, making it available for use by the managed
+                 device;
+
+                 - `createAndWait', which is supplied by a management
+                 station wishing to create a new instance of a
+                 conceptual row (but not make it available for use by
+                 the managed device); and,
+                 - `destroy', which is supplied by a management station
+                 wishing to delete all of the instances associated with
+                 an existing conceptual row.
+
+            Whereas five of the six values (all except `notReady') may
+            be specified in a management protocol set operation, only
+            three values will be returned in response to a management
+            protocol retrieval operation:  `notReady', `notInService' or
+            `active'.  That is, when queried, an existing conceptual row
+            has only three states:  it is either available for use by
+            the managed device (the status column has value `active');
+            it is not available for use by the managed device, though
+            the agent has sufficient information to attempt to make it
+            so (the status column has value `notInService'); or, it is
+            not available for use by the managed device, and an attempt
+            to make it so would fail because the agent has insufficient
+            information (the state column has value `notReady').
+
+                                     NOTE WELL
+
+                 This textual convention may be used for a MIB table,
+                 irrespective of whether the values of that table's
+                 conceptual rows are able to be modified while it is
+                 active, or whether its conceptual rows must be taken
+                 out of service in order to be modified.  That is, it is
+                 the responsibility of the DESCRIPTION clause of the
+                 status column to specify whether the status column must
+                 not be `active' in order for the value of some other
+                 column of the same conceptual row to be modified.  If
+                 such a specification is made, affected columns may be
+                 changed by an SNMP set PDU if the RowStatus would not
+                 be equal to `active' either immediately before or after
+                 processing the PDU.  In other words, if the PDU also
+                 contained a varbind that would change the RowStatus
+                 value, the column in question may be changed if the
+                 RowStatus was not equal to `active' as the PDU was
+                 received, or if the varbind sets the status to a value
+                 other than 'active'.
+
+            Also note that whenever any elements of a row exist, the
+            RowStatus column must also exist.
+
+            To summarize the effect of having a conceptual row with a
+            status column having a SYNTAX clause value of RowStatus,
+            consider the following state diagram:
+
+                                         STATE
+              +--------------+-----------+-------------+-------------
+              |      A       |     B     |      C      |      D
+              |              |status col.|status column|
+              |status column |    is     |      is     |status column
+    ACTION    |does not exist|  notReady | notInService|  is active
+--------------+--------------+-----------+-------------+-------------
+set status    |noError    ->D|inconsist- |inconsistent-|inconsistent-
+column to     |       or     |   entValue|        Value|        Value
+createAndGo   |inconsistent- |           |             |
+              |         Value|           |             |
+--------------+--------------+-----------+-------------+-------------
+set status    |noError  see 1|inconsist- |inconsistent-|inconsistent-
+column to     |       or     |   entValue|        Value|        Value
+createAndWait |wrongValue    |           |             |
+--------------+--------------+-----------+-------------+-------------
+set status    |inconsistent- |inconsist- |noError      |noError
+column to     |         Value|   entValue|             |
+active        |              |           |             |
+              |              |     or    |             |
+              |              |           |             |
+              |              |see 2   ->D|see 8     ->D|          ->D
+--------------+--------------+-----------+-------------+-------------
+set status    |inconsistent- |inconsist- |noError      |noError   ->C
+column to     |         Value|   entValue|             |
+notInService  |              |           |             |
+              |              |     or    |             |      or
+              |              |           |             |
+              |              |see 3   ->C|          ->C|see 6
+--------------+--------------+-----------+-------------+-------------
+set status    |noError       |noError    |noError      |noError   ->A
+column to     |              |           |             |      or
+destroy       |           ->A|        ->A|          ->A|see 7
+--------------+--------------+-----------+-------------+-------------
+set any other |see 4         |noError    |noError      |see 5
+column to some|              |           |             |
+value         |              |      see 1|          ->C|          ->D
+--------------+--------------+-----------+-------------+-------------
+
+            (1) goto B or C, depending on information available to the
+            agent.
+
+            (2) if other variable bindings included in the same PDU,
+            provide values for all columns which are missing but
+            required, and all columns have acceptable values, then
+            return noError and goto D.
+
+            (3) if other variable bindings included in the same PDU,
+            provide legal values for all columns which are missing but
+            required, then return noError and goto C.
+
+            (4) at the discretion of the agent, the return value may be
+            either:
+
+                 inconsistentName:  because the agent does not choose to
+                 create such an instance when the corresponding
+                 RowStatus instance does not exist, or
+
+                 inconsistentValue:  if the supplied value is
+                 inconsistent with the state of some other MIB object's
+                 value, or
+
+                 noError: because the agent chooses to create the
+                 instance.
+
+            If noError is returned, then the instance of the status
+            column must also be created, and the new state is B or C,
+            depending on the information available to the agent.  If
+            inconsistentName or inconsistentValue is returned, the row
+            remains in state A.
+
+            (5) depending on the MIB definition for the column/table,
+            either noError or inconsistentValue may be returned.
+
+            (6) the return value can indicate one of the following
+            errors:
+
+                 wrongValue: because the agent does not support
+                 notInService (e.g., an agent which does not support
+                 createAndWait), or
+
+                 inconsistentValue: because the agent is unable to take
+                 the row out of service at this time, perhaps because it
+                 is in use and cannot be de-activated.
+
+            (7) the return value can indicate the following error:
+
+                 inconsistentValue: because the agent is unable to
+                 remove the row at this time, perhaps because it is in
+                 use and cannot be de-activated.
+
+            (8) the transition to D can fail, e.g., if the values of the
+            conceptual row are inconsistent, then the error code would
+            be inconsistentValue.
+
+            NOTE: Other processing of (this and other varbinds of) the
+            set request may result in a response other than noError
+            being returned, e.g., wrongValue, noCreation, etc.
+
+                              Conceptual Row Creation
+
+            There are four potential interactions when creating a
+            conceptual row:  selecting an instance-identifier which is
+            not in use; creating the conceptual row; initializing any
+            objects for which the agent does not supply a default; and,
+            making the conceptual row available for use by the managed
+            device.
+
+            Interaction 1: Selecting an Instance-Identifier
+
+            The algorithm used to select an instance-identifier varies
+            for each conceptual row.  In some cases, the instance-
+            identifier is semantically significant, e.g., the
+            destination address of a route, and a management station
+            selects the instance-identifier according to the semantics.
+
+            In other cases, the instance-identifier is used solely to
+            distinguish conceptual rows, and a management station
+            without specific knowledge of the conceptual row might
+            examine the instances present in order to determine an
+            unused instance-identifier.  (This approach may be used, but
+            it is often highly sub-optimal; however, it is also a
+            questionable practice for a naive management station to
+            attempt conceptual row creation.)
+
+            Alternately, the MIB module which defines the conceptual row
+            might provide one or more objects which provide assistance
+            in determining an unused instance-identifier.  For example,
+            if the conceptual row is indexed by an integer-value, then
+            an object having an integer-valued SYNTAX clause might be
+            defined for such a purpose, allowing a management station to
+            issue a management protocol retrieval operation.  In order
+            to avoid unnecessary collisions between competing management
+            stations, `adjacent' retrievals of this object should be
+            different.
+
+            Finally, the management station could select a pseudo-random
+            number to use as the index.  In the event that this index
+
+            was already in use and an inconsistentValue was returned in
+            response to the management protocol set operation, the
+            management station should simply select a new pseudo-random
+            number and retry the operation.
+
+            A MIB designer should choose between the two latter
+            algorithms based on the size of the table (and therefore the
+            efficiency of each algorithm).  For tables in which a large
+            number of entries are expected, it is recommended that a MIB
+            object be defined that returns an acceptable index for
+            creation.  For tables with small numbers of entries, it is
+            recommended that the latter pseudo-random index mechanism be
+            used.
+
+            Interaction 2: Creating the Conceptual Row
+
+            Once an unused instance-identifier has been selected, the
+            management station determines if it wishes to create and
+            activate the conceptual row in one transaction or in a
+            negotiated set of interactions.
+
+            Interaction 2a: Creating and Activating the Conceptual Row
+
+            The management station must first determine the column
+            requirements, i.e., it must determine those columns for
+            which it must or must not provide values.  Depending on the
+            complexity of the table and the management station's
+            knowledge of the agent's capabilities, this determination
+            can be made locally by the management station.  Alternately,
+            the management station issues a management protocol get
+            operation to examine all columns in the conceptual row that
+            it wishes to create.  In response, for each column, there
+            are three possible outcomes:
+
+                 - a value is returned, indicating that some other
+                 management station has already created this conceptual
+                 row.  We return to interaction 1.
+
+                 - the exception `noSuchInstance' is returned,
+                 indicating that the agent implements the object-type
+                 associated with this column, and that this column in at
+                 least one conceptual row would be accessible in the MIB
+                 view used by the retrieval were it to exist. For those
+                 columns to which the agent provides read-create access,
+                 the `noSuchInstance' exception tells the management
+                 station that it should supply a value for this column
+                 when the conceptual row is to be created.
+
+                 - the exception `noSuchObject' is returned, indicating
+                 that the agent does not implement the object-type
+                 associated with this column or that there is no
+                 conceptual row for which this column would be
+                 accessible in the MIB view used by the retrieval.  As
+                 such, the management station can not issue any
+                 management protocol set operations to create an
+                 instance of this column.
+
+            Once the column requirements have been determined, a
+            management protocol set operation is accordingly issued.
+            This operation also sets the new instance of the status
+            column to `createAndGo'.
+
+            When the agent processes the set operation, it verifies that
+            it has sufficient information to make the conceptual row
+            available for use by the managed device.  The information
+            available to the agent is provided by two sources:  the
+            management protocol set operation which creates the
+            conceptual row, and, implementation-specific defaults
+            supplied by the agent (note that an agent must provide
+            implementation-specific defaults for at least those objects
+            which it implements as read-only).  If there is sufficient
+            information available, then the conceptual row is created, a
+            `noError' response is returned, the status column is set to
+            `active', and no further interactions are necessary (i.e.,
+            interactions 3 and 4 are skipped).  If there is insufficient
+            information, then the conceptual row is not created, and the
+            set operation fails with an error of `inconsistentValue'.
+            On this error, the management station can issue a management
+            protocol retrieval operation to determine if this was
+            because it failed to specify a value for a required column,
+            or, because the selected instance of the status column
+            already existed.  In the latter case, we return to
+            interaction 1.  In the former case, the management station
+            can re-issue the set operation with the additional
+            information, or begin interaction 2 again using
+            `createAndWait' in order to negotiate creation of the
+            conceptual row.
+
+                                     NOTE WELL
+
+                 Regardless of the method used to determine the column
+                 requirements, it is possible that the management
+                 station might deem a column necessary when, in fact,
+                 the agent will not allow that particular columnar
+                 instance to be created or written.  In this case, the
+                 management protocol set operation will fail with an
+                 error such as `noCreation' or `notWritable'.  In this
+                 case, the management station decides whether it needs
+                 to be able to set a value for that particular columnar
+                 instance.  If not, the management station re-issues the
+                 management protocol set operation, but without setting
+                 a value for that particular columnar instance;
+                 otherwise, the management station aborts the row
+                 creation algorithm.
+
+            Interaction 2b: Negotiating the Creation of the Conceptual
+            Row
+
+            The management station issues a management protocol set
+            operation which sets the desired instance of the status
+            column to `createAndWait'.  If the agent is unwilling to
+            process a request of this sort, the set operation fails with
+            an error of `wrongValue'.  (As a consequence, such an agent
+            must be prepared to accept a single management protocol set
+            operation, i.e., interaction 2a above, containing all of the
+            columns indicated by its column requirements.)  Otherwise,
+            the conceptual row is created, a `noError' response is
+            returned, and the status column is immediately set to either
+            `notInService' or `notReady', depending on whether it has
+            sufficient information to (attempt to) make the conceptual
+            row available for use by the managed device.  If there is
+            sufficient information available, then the status column is
+            set to `notInService'; otherwise, if there is insufficient
+            information, then the status column is set to `notReady'.
+            Regardless, we proceed to interaction 3.
+
+            Interaction 3: Initializing non-defaulted Objects
+
+            The management station must now determine the column
+            requirements.  It issues a management protocol get operation
+            to examine all columns in the created conceptual row.  In
+            the response, for each column, there are three possible
+            outcomes:
+
+                 - a value is returned, indicating that the agent
+                 implements the object-type associated with this column
+                 and had sufficient information to provide a value.  For
+                 those columns to which the agent provides read-create
+                 access (and for which the agent allows their values to
+                 be changed after their creation), a value return tells
+                 the management station that it may issue additional
+                 management protocol set operations, if it desires, in
+                 order to change the value associated with this column.
+
+                 - the exception `noSuchInstance' is returned,
+                 indicating that the agent implements the object-type
+                 associated with this column, and that this column in at
+                 least one conceptual row would be accessible in the MIB
+                 view used by the retrieval were it to exist. However,
+                 the agent does not have sufficient information to
+                 provide a value, and until a value is provided, the
+                 conceptual row may not be made available for use by the
+                 managed device.  For those columns to which the agent
+                 provides read-create access, the `noSuchInstance'
+                 exception tells the management station that it must
+                 issue additional management protocol set operations, in
+                 order to provide a value associated with this column.
+
+                 - the exception `noSuchObject' is returned, indicating
+                 that the agent does not implement the object-type
+                 associated with this column or that there is no
+                 conceptual row for which this column would be
+                 accessible in the MIB view used by the retrieval.  As
+                 such, the management station can not issue any
+                 management protocol set operations to create an
+                 instance of this column.
+
+            If the value associated with the status column is
+            `notReady', then the management station must first deal with
+            all `noSuchInstance' columns, if any.  Having done so, the
+            value of the status column becomes `notInService', and we
+            proceed to interaction 4.
+
+            Interaction 4: Making the Conceptual Row Available
+
+            Once the management station is satisfied with the values
+            associated with the columns of the conceptual row, it issues
+            a management protocol set operation to set the status column
+            to `active'.  If the agent has sufficient information to
+            make the conceptual row available for use by the managed
+            device, the management protocol set operation succeeds (a
+            `noError' response is returned).  Otherwise, the management
+            protocol set operation fails with an error of
+            `inconsistentValue'.
+
+                                     NOTE WELL
+
+                 A conceptual row having a status column with value
+                 `notInService' or `notReady' is unavailable to the
+                 managed device.  As such, it is possible for the
+                 managed device to create its own instances during the
+                 time between the management protocol set operation
+                 which sets the status column to `createAndWait' and the
+                 management protocol set operation which sets the status
+                 column to `active'.  In this case, when the management
+                 protocol set operation is issued to set the status
+                 column to `active', the values held in the agent
+                 supersede those used by the managed device.
+
+            If the management station is prevented from setting the
+            status column to `active' (e.g., due to management station
+            or network failure) the conceptual row will be left in the
+            `notInService' or `notReady' state, consuming resources
+            indefinitely.  The agent must detect conceptual rows that
+            have been in either state for an abnormally long period of
+            time and remove them.  It is the responsibility of the
+            DESCRIPTION clause of the status column to indicate what an
+            abnormally long period of time would be.  This period of
+            time should be long enough to allow for human response time
+            (including `think time') between the creation of the
+            conceptual row and the setting of the status to `active'.
+            In the absence of such information in the DESCRIPTION
+            clause, it is suggested that this period be approximately 5
+            minutes in length.  This removal action applies not only to
+            newly-created rows, but also to previously active rows which
+            are set to, and left in, the notInService state for a
+            prolonged period exceeding that which is considered normal
+            for such a conceptual row.
+
+                             Conceptual Row Suspension
+
+            When a conceptual row is `active', the management station
+            may issue a management protocol set operation which sets the
+            instance of the status column to `notInService'.  If the
+            agent is unwilling to do so, the set operation fails with an
+            error of `wrongValue' or `inconsistentValue'.  Otherwise,
+            the conceptual row is taken out of service, and a `noError'
+            response is returned.  It is the responsibility of the
+            DESCRIPTION clause of the status column to indicate under
+            what circumstances the status column should be taken out of
+            service (e.g., in order for the value of some other column
+            of the same conceptual row to be modified).
+
+                              Conceptual Row Deletion
+
+            For deletion of conceptual rows, a management protocol set
+            operation is issued which sets the instance of the status
+            column to `destroy'.  This request may be made regardless of
+            the current value of the status column (e.g., it is possible
+            to delete conceptual rows which are either `notReady',
+            `notInService' or `active'.)  If the operation succeeds,
+            then all instances associated with the conceptual row are
+            immediately removed."
+    SYNTAX       INTEGER {
+                     -- the following two values are states:
+                     -- these values may be read or written
+                     active(1),
+                     notInService(2),
+                     -- the following value is a state:
+                     -- this value may be read, but not written
+                     notReady(3),
+                     -- the following three values are
+                     -- actions: these values may be written,
+                     --   but are never read
+                     createAndGo(4),
+                     createAndWait(5),
+                     destroy(6)
+                 }
+
+TimeStamp ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The value of the sysUpTime object at which a specific
+            occurrence happened.  The specific occurrence must be
+
+            defined in the description of any object defined using this
+            type.
+
+            If sysUpTime is reset to zero as a result of a re-
+            initialization of the network management (sub)system, then
+            the values of all TimeStamp objects are also reset.
+            However, after approximately 497 days without a re-
+            initialization, the sysUpTime object will reach 2^^32-1 and
+            then increment around to zero; in this case, existing values
+            of TimeStamp objects do not change.  This can lead to
+            ambiguities in the value of TimeStamp objects."
+    SYNTAX       TimeTicks
+
+TimeInterval ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "A period of time, measured in units of 0.01 seconds."
+    SYNTAX       INTEGER (0..2147483647)
+
+DateAndTime ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d"
+    STATUS       current
+    DESCRIPTION
+            "A date-time specification.
+
+            field  octets  contents                  range
+            -----  ------  --------                  -----
+              1      1-2   year*                     0..65536
+              2       3    month                     1..12
+              3       4    day                       1..31
+              4       5    hour                      0..23
+              5       6    minutes                   0..59
+              6       7    seconds                   0..60
+                           (use 60 for leap-second)
+              7       8    deci-seconds              0..9
+              8       9    direction from UTC        '+' / '-'
+              9      10    hours from UTC*           0..13
+             10      11    minutes from UTC          0..59
+
+            * Notes:
+            - the value of year is in network-byte order
+            - daylight saving time in New Zealand is +13
+
+            For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
+            displayed as:
+
+                             1992-5-26,13:30:15.0,-4:0
+
+            Note that if only local time is known, then timezone
+            information (fields 8-10) is not present."
+    SYNTAX       OCTET STRING (SIZE (8 | 11))
+
+StorageType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Describes the memory realization of a conceptual row.  A
+            row which is volatile(2) is lost upon reboot.  A row which
+            is either nonVolatile(3), permanent(4) or readOnly(5), is
+            backed up by stable storage.  A row which is permanent(4)
+            can be changed but not deleted.  A row which is readOnly(5)
+            cannot be changed nor deleted.
+
+            If the value of an object with this syntax is either
+            permanent(4) or readOnly(5), it cannot be written.
+            Conversely, if the value is either other(1), volatile(2) or
+            nonVolatile(3), it cannot be modified to be permanent(4) or
+            readOnly(5).  (All illegal modifications result in a
+            'wrongValue' error.)
+
+            Every usage of this textual convention is required to
+            specify the columnar objects which a permanent(4) row must
+            at a minimum allow to be writable."
+    SYNTAX       INTEGER {
+                     other(1),       -- eh?
+                     volatile(2),    -- e.g., in RAM
+                     nonVolatile(3), -- e.g., in NVRAM
+                     permanent(4),   -- e.g., partially in ROM
+                     readOnly(5)     -- e.g., completely in ROM
+                 }
+
+TDomain ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+          "Denotes a kind of transport service.
+
+          Some possible values, such as snmpUDPDomain, are defined in
+          the SNMPv2-TM MIB module.  Other possible values are defined
+          in other MIB modules."
+    REFERENCE    "The SNMPv2-TM MIB module is defined in RFC 1906."
+    SYNTAX       OBJECT IDENTIFIER
+
+TAddress ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+          "Denotes a transport service address.
+
+          A TAddress value is always interpreted within the context of a
+          TDomain value.  Thus, each definition of a TDomain value must
+          be accompanied by a definition of a textual convention for use
+          with that TDomain.  Some possible textual conventions, such as
+          SnmpUDPAddress for snmpUDPDomain, are defined in the SNMPv2-TM
+          MIB module.  Other possible textual conventions are defined in
+          other MIB modules."
+    REFERENCE    "The SNMPv2-TM MIB module is defined in RFC 1906."
+    SYNTAX       OCTET STRING (SIZE (1..255))
+
+END
diff --git a/share/snmp/SNMPv2-TM.txt b/share/snmp/SNMPv2-TM.txt
new file mode 100644
index 00000000000..949f99c7e07
--- /dev/null
+++ b/share/snmp/SNMPv2-TM.txt
@@ -0,0 +1,176 @@
+SNMPv2-TM DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY,
+    snmpModules, snmpDomains, snmpProxys
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+snmpv2tm MODULE-IDENTITY
+    LAST-UPDATED "200210160000Z"
+    ORGANIZATION "IETF SNMPv3 Working Group"
+    CONTACT-INFO
+            "WG-EMail:   snmpv3@lists.tislabs.com
+             Subscribe:  snmpv3-request@lists.tislabs.com
+
+             Co-Chair:   Russ Mundy
+                         Network Associates Laboratories
+             postal:     15204 Omega Drive, Suite 300
+                         Rockville, MD 20850-4601
+                         USA
+             EMail:      mundy@tislabs.com
+             phone:      +1 301 947-7107
+
+             Co-Chair:   David Harrington
+                         Enterasys Networks
+             postal:     35 Industrial Way
+                         P. O. Box 5005
+                         Rochester, NH 03866-5005
+                         USA
+             EMail:      dbh@enterasys.com
+             phone:      +1 603 337-2614
+
+             Editor:     Randy Presuhn
+                         BMC Software, Inc.
+             postal:     2141 North First Street
+                         San Jose, CA 95131
+                         USA
+             EMail:      randy_presuhn@bmc.com
+             phone:      +1 408 546-1006"
+    DESCRIPTION
+            "The MIB module for SNMP transport mappings.
+
+             Copyright (C) The Internet Society (2002). This
+             version of this MIB module is part of RFC 3417;
+             see the RFC itself for full legal notices.
+            "
+    REVISION     "200210160000Z"
+    DESCRIPTION
+            "Clarifications, published as RFC 3417."
+    REVISION    "199601010000Z"
+    DESCRIPTION
+            "Clarifications, published as RFC 1906."
+    REVISION    "199304010000Z"
+    DESCRIPTION
+            "The initial version, published as RFC 1449."
+    ::= { snmpModules 19 }
+
+-- SNMP over UDP over IPv4
+
+snmpUDPDomain  OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The SNMP over UDP over IPv4 transport domain.
+            The corresponding transport address is of type
+            SnmpUDPAddress."
+    ::= { snmpDomains 1 }
+
+SnmpUDPAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d/2d"
+    STATUS       current
+    DESCRIPTION
+            "Represents a UDP over IPv4 address:
+
+               octets   contents        encoding
+                1-4     IP-address      network-byte order
+                5-6     UDP-port        network-byte order
+            "
+    SYNTAX       OCTET STRING (SIZE (6))
+
+-- SNMP over OSI
+
+snmpCLNSDomain OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The SNMP over CLNS transport domain.
+            The corresponding transport address is of type
+            SnmpOSIAddress."
+    ::= { snmpDomains 2 }
+
+snmpCONSDomain OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The SNMP over CONS transport domain.
+            The corresponding transport address is of type
+            SnmpOSIAddress."
+    ::= { snmpDomains 3 }
+
+SnmpOSIAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "*1x:/1x:"
+    STATUS       current
+    DESCRIPTION
+            "Represents an OSI transport-address:
+
+          octets   contents           encoding
+             1     length of NSAP     'n' as an unsigned-integer
+                                         (either 0 or from 3 to 20)
+          2..(n+1) NSAP                concrete binary representation
+          (n+2)..m TSEL                string of (up to 64) octets
+            "
+    SYNTAX       OCTET STRING (SIZE (1 | 4..85))
+
+-- SNMP over DDP
+
+snmpDDPDomain  OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The SNMP over DDP transport domain.  The corresponding
+            transport address is of type SnmpNBPAddress."
+    ::= { snmpDomains 4 }
+
+SnmpNBPAddress ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents an NBP name:
+
+         octets        contents          encoding
+            1          length of object  'n' as an unsigned integer
+          2..(n+1)     object            string of (up to 32) octets
+           n+2         length of type    'p' as an unsigned integer
+      (n+3)..(n+2+p)   type              string of (up to 32) octets
+          n+3+p        length of zone    'q' as an unsigned integer
+    (n+4+p)..(n+3+p+q) zone              string of (up to 32) octets
+
+            For comparison purposes, strings are
+            case-insensitive. All strings may contain any octet
+            other than 255 (hex ff)."
+    SYNTAX       OCTET STRING (SIZE (3..99))
+
+-- SNMP over IPX
+
+snmpIPXDomain  OBJECT-IDENTITY
+    STATUS     current
+    DESCRIPTION
+            "The SNMP over IPX transport domain.  The corresponding
+            transport address is of type SnmpIPXAddress."
+    ::= { snmpDomains 5 }
+
+SnmpIPXAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "4x.1x:1x:1x:1x:1x:1x.2d"
+    STATUS       current
+    DESCRIPTION
+            "Represents an IPX address:
+
+               octets   contents            encoding
+                1-4     network-number      network-byte order
+                5-10    physical-address    network-byte order
+               11-12    socket-number       network-byte order
+            "
+    SYNTAX       OCTET STRING (SIZE (12))
+
+-- for proxy to SNMPv1 (RFC 1157)
+
+rfc1157Proxy   OBJECT IDENTIFIER ::= { snmpProxys 1 }
+
+rfc1157Domain  OBJECT-IDENTITY
+    STATUS     deprecated
+    DESCRIPTION
+            "The transport domain for SNMPv1 over UDP over IPv4.
+            The corresponding transport address is of type
+            SnmpUDPAddress."
+    ::= { rfc1157Proxy 1 }
+
+--  ::= { rfc1157Proxy 2 }            this OID is obsolete
+
+END
diff --git a/share/snmp/TRANSPORT-ADDRESS-MIB.txt b/share/snmp/TRANSPORT-ADDRESS-MIB.txt
new file mode 100644
index 00000000000..227886e786b
--- /dev/null
+++ b/share/snmp/TRANSPORT-ADDRESS-MIB.txt
@@ -0,0 +1,421 @@
+TRANSPORT-ADDRESS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, mib-2     FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION                          FROM SNMPv2-TC;
+
+transportAddressMIB MODULE-IDENTITY
+    LAST-UPDATED "200211010000Z"
+    ORGANIZATION
+        "IETF Operations and Management Area"
+    CONTACT-INFO
+        "Juergen Schoenwaelder (Editor)
+         TU Braunschweig
+         Bueltenweg 74/75
+         38106 Braunschweig, Germany
+
+         Phone: +49 531 391-3289
+         EMail: schoenw@ibr.cs.tu-bs.de
+
+         Send comments to <mibs@ops.ietf.org>."
+    DESCRIPTION
+        "This MIB module provides commonly used transport
+         address definitions.
+
+         Copyright (C) The Internet Society (2002). This version of
+         this MIB module is part of RFC 3419; see the RFC itself for
+         full legal notices."
+
+    -- Revision log
+
+    REVISION    "200211010000Z"
+    DESCRIPTION
+        "Initial version, published as RFC 3419."
+    ::= { mib-2 100 }
+
+transportDomains OBJECT IDENTIFIER ::= { transportAddressMIB 1 }
+
+transportDomainUdpIpv4 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4 for
+         global IPv4 addresses."
+    ::= { transportDomains 1 }
+
+transportDomainUdpIpv6 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6 for
+         global IPv6 addresses."
+    ::= { transportDomains 2 }
+
+transportDomainUdpIpv4z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4z for
+         scoped IPv4 addresses with a zone index."
+    ::= { transportDomains 3 }
+
+transportDomainUdpIpv6z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6z for
+         scoped IPv6 addresses with a zone index."
+    ::= { transportDomains 4 }
+
+transportDomainTcpIpv4 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4 for
+         global IPv4 addresses."
+    ::= { transportDomains 5 }
+
+transportDomainTcpIpv6 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6 for
+         global IPv6 addresses."
+    ::= { transportDomains 6 }
+
+transportDomainTcpIpv4z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4z for
+         scoped IPv4 addresses with a zone index."
+    ::= { transportDomains 7 }
+
+transportDomainTcpIpv6z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6z for
+         scoped IPv6 addresses with a zone index."
+    ::= { transportDomains 8 }
+
+transportDomainSctpIpv4 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4 for
+         global IPv4 addresses. This transport domain usually
+         represents the primary address on multihomed SCTP
+         endpoints."
+    ::= { transportDomains 9 }
+
+transportDomainSctpIpv6 OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6 for
+         global IPv6 addresses. This transport domain usually
+         represents the primary address on multihomed SCTP
+         endpoints."
+    ::= { transportDomains 10 }
+
+transportDomainSctpIpv4z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv4 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv4z for
+         scoped IPv4 addresses with a zone index. This transport
+         domain usually represents the primary address on
+         multihomed SCTP endpoints."
+    ::= { transportDomains 11 }
+
+transportDomainSctpIpv6z OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP over IPv6 transport domain.  The corresponding
+         transport address is of type TransportAddressIPv6z for
+         scoped IPv6 addresses with a zone index. This transport
+         domain usually represents the primary address on
+         multihomed SCTP endpoints."
+    ::= { transportDomains 12 }
+
+transportDomainLocal OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The Posix Local IPC transport domain. The corresponding
+         transport address is of type TransportAddressLocal.
+
+         The Posix Local IPC transport domain incorporates the
+         well-known UNIX domain sockets."
+    ::= { transportDomains 13 }
+
+transportDomainUdpDns OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The UDP transport domain using fully qualified domain
+         names. The corresponding transport address is of type
+         TransportAddressDns."
+    ::= { transportDomains 14 }
+
+transportDomainTcpDns OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The TCP transport domain using fully qualified domain
+         names. The corresponding transport address is of type
+         TransportAddressDns."
+    ::= { transportDomains 15 }
+
+transportDomainSctpDns OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION
+        "The SCTP transport domain using fully qualified domain
+         names. The corresponding transport address is of type
+         TransportAddressDns."
+    ::= { transportDomains 16 }
+
+TransportDomain ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value that represents a transport domain.
+
+         Some possible values, such as transportDomainUdpIpv4, are
+         defined in this module.  Other possible values can be
+         defined in other MIB modules."
+    SYNTAX      OBJECT IDENTIFIER
+
+--
+-- The enumerated values of the textual convention below should
+-- be identical to the last sub-identifier of the OID registered
+-- for the same domain.
+--
+
+TransportAddressType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A value that represents a transport domain. This is the
+         enumerated version of the transport domain registrations
+         in this MIB module. The enumerated values have the
+         following meaning:
+
+         unknown(0)     unknown transport address type
+         udpIpv4(1)     transportDomainUdpIpv4
+         udpIpv6(2)     transportDomainUdpIpv6
+         udpIpv4z(3)    transportDomainUdpIpv4z
+         udpIpv6z(4)    transportDomainUdpIpv6z
+         tcpIpv4(5)     transportDomainTcpIpv4
+         tcpIpv6(6)     transportDomainTcpIpv6
+         tcpIpv4z(7)    transportDomainTcpIpv4z
+
+         tcpIpv6z(8)    transportDomainTcpIpv6z
+         sctpIpv4(9)    transportDomainSctpIpv4
+         sctpIpv6(10)   transportDomainSctpIpv6
+         sctpIpv4z(11)  transportDomainSctpIpv4z
+         sctpIpv6z(12)  transportDomainSctpIpv6z
+         local(13)      transportDomainLocal
+         udpDns(14)     transportDomainUdpDns
+         tcpDns(15)     transportDomainTcpDns
+         sctpDns(16)    transportDomainSctpDns
+
+         This textual convention can be used to represent transport
+         domains in situations where a syntax of TransportDomain is
+         unwieldy (for example, when used as an index).
+
+         The usage of this textual convention implies that additional
+         transport domains can only be supported by updating this MIB
+         module. This extensibility restriction does not apply for the
+         TransportDomain textual convention which allows MIB authors
+         to define additional transport domains independently in
+         other MIB modules."
+    SYNTAX      INTEGER {
+                    unknown(0),
+                    udpIpv4(1),
+                    udpIpv6(2),
+                    udpIpv4z(3),
+                    udpIpv6z(4),
+                    tcpIpv4(5),
+                    tcpIpv6(6),
+                    tcpIpv4z(7),
+                    tcpIpv6z(8),
+                    sctpIpv4(9),
+                    sctpIpv6(10),
+                    sctpIpv4z(11),
+                    sctpIpv6z(12),
+                    local(13),
+                    udpDns(14),
+                    tcpDns(15),
+                    sctpDns(16)
+                }
+
+TransportAddress ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Denotes a generic transport address.
+
+         A TransportAddress value is always interpreted within the
+         context of a TransportAddressType or TransportDomain value.
+         Every usage of the TransportAddress textual convention MUST
+
+         specify the TransportAddressType or TransportDomain object
+         which provides the context. Furthermore, MIB authors SHOULD
+         define a separate TransportAddressType or TransportDomain
+         object for each TransportAddress object. It is suggested that
+         the TransportAddressType or TransportDomain is logically
+         registered before the object(s) which use the
+         TransportAddress textual convention if they appear in the
+         same logical row.
+
+         The value of a TransportAddress object must always be
+         consistent with the value of the associated
+         TransportAddressType or TransportDomain object. Attempts
+         to set a TransportAddress object to a value which is
+         inconsistent with the associated TransportAddressType or
+         TransportDomain must fail with an inconsistentValue error.
+
+         When this textual convention is used as a syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58. In this case,
+         the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers."
+    SYNTAX      OCTET STRING (SIZE (0..255))
+
+TransportAddressIPv4 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv4
+         address and a port number (as used for example by UDP,
+         TCP and SCTP):
+
+          octets       contents         encoding
+           1-4         IPv4 address     network-byte order
+           5-6         port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (6))
+
+TransportAddressIPv6 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv6
+         address and a port number (as used for example by UDP,
+         TCP and SCTP):
+
+          octets       contents         encoding
+           1-16        IPv6 address     network-byte order
+          17-18        port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (18))
+
+TransportAddressIPv4z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d%4d:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv4
+         address, a zone index and a port number (as used for
+         example by UDP, TCP and SCTP):
+
+          octets       contents         encoding
+           1-4         IPv4 address     network-byte order
+           5-8         zone index       network-byte order
+           9-10        port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (10))
+
+TransportAddressIPv6z ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d"
+    STATUS      current
+    DESCRIPTION
+        "Represents a transport address consisting of an IPv6
+         address, a zone index and a port number (as used for
+         example by UDP, TCP and SCTP):
+
+          octets       contents         encoding
+           1-16        IPv6 address     network-byte order
+          17-20        zone index       network-byte order
+          21-22        port number      network-byte order
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair."
+    SYNTAX      OCTET STRING (SIZE (22))
+
+TransportAddressLocal ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1a"
+    STATUS      current
+    DESCRIPTION
+        "Represents a POSIX Local IPC transport address:
+
+          octets       contents                   encoding
+           all         POSIX Local IPC address    string
+
+         The Posix Local IPC transport domain subsumes UNIX domain
+         sockets.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair.
+
+         When this textual convention is used as a syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58. In this case,
+         the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers."
+    REFERENCE
+        "Protocol Independent Interfaces (IEEE POSIX 1003.1g)"
+    SYNTAX      OCTET STRING (SIZE (1..255))
+
+TransportAddressDns ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1a"
+    STATUS      current
+    DESCRIPTION
+        "Represents a DNS domain name followed by a colon ':'
+         (ASCII character 0x3A) and a port number in ASCII.
+         The name SHOULD be fully qualified whenever possible.
+
+         Values of this textual convention are not directly useable as
+         transport-layer addressing information, and require runtime
+         resolution. As such, applications that write them must be
+         prepared for handling errors if such values are not
+         supported, or cannot be resolved (if resolution occurs at the
+         time of the management operation).
+
+         The DESCRIPTION clause of TransportAddress objects that may
+
+         have TransportAddressDns values must fully describe how (and
+         when) such names are to be resolved to IP addresses and vice
+         versa.
+
+         This textual convention SHOULD NOT be used directly in object
+         definitions since it restricts addresses to a specific format.
+         However, if it is used, it MAY be used either on its own or
+         in conjunction with TransportAddressType or TransportDomain
+         as a pair.
+
+         When this textual convention is used as a syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, STD 58. In this case,
+         the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers."
+    SYNTAX      OCTET STRING (SIZE (1..255))
+
+END
diff --git a/share/snmp/UUID-TC-MIB.txt b/share/snmp/UUID-TC-MIB.txt
new file mode 100644
index 00000000000..536c8c4ce47
--- /dev/null
+++ b/share/snmp/UUID-TC-MIB.txt
@@ -0,0 +1,86 @@
+UUID-TC-MIB DEFINITIONS ::= BEGIN

+

+     IMPORTS

+       MODULE-IDENTITY, mib-2

+         FROM SNMPv2-SMI             -- RFC 2578

+       TEXTUAL-CONVENTION

+         FROM SNMPv2-TC              -- RFC 2579

+       ;

+

+     uuidTCMIB MODULE-IDENTITY

+

+       LAST-UPDATED "201304050000Z"  -- April 5, 2013

+       ORGANIZATION "IETF Energy Management Working Group"

+       CONTACT-INFO "WG Email: eman@ietf.org

+                     Mailing list subscription info:

+                     http://www.ietf.org/mailman/listinfo/eman

+

+                     Dan Romascanu

+                     Avaya

+                     Park Atidim, Bldg. #3

+                     Tel Aviv, 61581

+                     Israel

+                     Phone: +972-3-6458414

+                     Email: dromasca@avaya.com

+

+                     Juergen Quittek

+                     NEC Europe Ltd.

+                     Network Research Division

+                     Kurfuersten-Anlage 36

+                     Heidelberg  69115

+                     Germany

+                     Phone: +49 6221 4342-115

+                     Email: quittek@neclab.eu

+

+                     Mouli Chandramouli

+                     Cisco Systems, Inc.

+                     Sarjapur Outer Ring Road

+                     Bangalore 560103

+                     India

+                     Phone: +91 80 4429 2409

+                     Email: moulchan@cisco.com"

+       DESCRIPTION

+                  "This MIB module defines TEXTUAL-CONVENTIONs

+                   representing Universally Unique IDentifiers

+                   (UUIDs).

+

+                   Copyright (c) 2013 IETF Trust and the persons

+                   identified as authors of the code.  All rights

+                   reserved.

+

+                   Redistribution and use in source and binary forms,

+                   with or without modification, is permitted

+                   pursuant to, and subject to the license terms

+                   contained in, the Simplified BSD License set forth

+                   in Section 4.c of the IETF Trust's Legal

+                   Provisions Relating to IETF Documents

+                   (http://trustee.ietf.org/license-info)."

+

+       REVISION     "201304050000Z"  -- April 5, 2013

+       DESCRIPTION  "Initial version of this MIB as published in

+                     RFC 6933."

+       ::= { mib-2 217 }

+

+     -- Textual Conventions

+

+UUID ::= TEXTUAL-CONVENTION

+    DISPLAY-HINT    "4x-2x-2x-1x1x-6x"

+    STATUS          current

+    DESCRIPTION

+         "Universally Unique Identifier information.  The syntax must

+          conform to RFC 4122, Section 4.1."

+        SYNTAX      OCTET STRING (SIZE (16))

+

+UUIDorZero ::= TEXTUAL-CONVENTION

+    DISPLAY-HINT    "4x-2x-2x-1x1x-6x"

+    STATUS          current

+    DESCRIPTION

+         "Universally Unique Identifier information.  The syntax must

+          conform to RFC 4122, Section 4.1.

+

+          The semantics of the value zero-length OCTET STRING are

+          object-specific and must therefore be defined as part of

+          the description of any object that uses this syntax."

+        SYNTAX      OCTET STRING (SIZE (0|16))

+

+END

diff --git a/share/snmp/VM-MIB.txt b/share/snmp/VM-MIB.txt
new file mode 100644
index 00000000000..1c82e5ebc83
--- /dev/null
+++ b/share/snmp/VM-MIB.txt
@@ -0,0 +1,1673 @@
+VM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, TimeTicks,
+    Counter64, Integer32, mib-2
+        FROM SNMPv2-SMI
+    OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    TEXTUAL-CONVENTION, PhysAddress, TruthValue
+        FROM SNMPv2-TC
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    UUIDorZero
+        FROM UUID-TC-MIB
+    InterfaceIndexOrZero
+        FROM IF-MIB
+
+    IANAStorageMediaType
+        FROM IANA-STORAGE-MEDIA-TYPE-MIB;
+
+vmMIB MODULE-IDENTITY
+    LAST-UPDATED "201510120000Z"        -- 12 October 2015
+    ORGANIZATION "IETF Operations and Management Area Working Group"
+    CONTACT-INFO
+            "WG Email: opsawg@ietf.org
+            Mailing list subscription info:
+            https://www.ietf.org/mailman/listinfo/opsawg
+
+            Hirochika Asai
+            The University of Tokyo
+            7-3-1 Hongo
+            Bunkyo-ku, Tokyo  113-8656
+            Japan
+            Phone: +81 3 5841 6748
+            Email: panda@hongo.wide.ad.jp
+
+            Michael MacFaden
+            VMware Inc.
+            Email: mrm@vmware.com
+
+            Juergen Schoenwaelder
+            Jacobs University
+            Campus Ring 1
+            Bremen 28759
+            Germany
+            Email: j.schoenwaelder@jacobs-university.de
+
+            Keiichi Shima
+            IIJ Innovation Institute Inc.
+            3-13 Kanda-Nishikicho
+            Chiyoda-ku, Tokyo  101-0054
+            Japan
+            Email: keiichi@iijlab.net
+
+            Tina Tsou
+            Huawei Technologies (USA)
+            2330 Central Expressway
+            Santa Clara, CA 95050
+            United States
+            Email: tina.tsou.zouting@huawei.com"
+    DESCRIPTION
+            "This MIB module is for use in managing a hypervisor and
+            virtual machines controlled by the hypervisor.
+
+            Copyright (c) 2015 IETF Trust and the persons identified
+            as authors of the code.  All rights reserved.
+
+            Redistribution and use in source and binary forms, with
+            or without modification, is permitted pursuant to, and
+            subject to the license terms contained in, the
+            Simplified BSD License set forth in Section 4.c of the
+            IETF Trust's Legal Provisions Relating to IETF Documents
+            (http://trustee.ietf.org/license-info)."
+
+    REVISION "201510120000Z"        -- 12 October 2015
+    DESCRIPTION
+            "The initial version of this MIB, published as
+            RFC 7666."
+    ::= { mib-2 236 }
+
+vmNotifications OBJECT IDENTIFIER ::= { vmMIB 0 }
+vmObjects       OBJECT IDENTIFIER ::= { vmMIB 1 }
+vmConformance   OBJECT IDENTIFIER ::= { vmMIB 2 }
+
+-- Textual conversion definitions
+--
+VirtualMachineIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "A unique value, greater than zero, identifying a
+            virtual machine.  The value for each virtual machine
+            MUST remain constant at least from one re-initialization
+            of the hypervisor to the next re-initialization."
+    SYNTAX       Integer32 (1..2147483647)
+
+VirtualMachineIndexOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "This textual convention is an extension of the
+            VirtualMachineIndex convention.  This extension permits
+            the additional value of zero.  The meaning of the value
+            zero is object-specific and MUST therefore be defined as
+            part of the description of any object that uses this
+            syntax.  Examples of the usage of zero might include
+            situations where a virtual machine is unknown, or when
+            none or all virtual machines need to be referenced."
+    SYNTAX       Integer32 (0..2147483647)
+
+VirtualMachineAdminState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+            "The administrative state of a virtual machine:
+
+            running(1)    The administrative state of the virtual
+                          machine indicating the virtual machine
+                          is currently online or should be brought
+                          online.
+
+            suspended(2)  The administrative state of the virtual
+                          machine where its memory and CPU execution
+                          state has been saved to persistent store
+                          and will be restored at next running(1).
+
+            paused(3)     The administrative state indicating the
+                          virtual machine is resident in memory but
+                          is no longer scheduled to execute by the
+                          hypervisor.
+
+            shutdown(4)   The administrative state of the virtual
+                          machine indicating the virtual machine
+                          is currently offline or should be
+                          shutting down."
+    SYNTAX       INTEGER {
+                    running(1),
+                    suspended(2),
+                    paused(3),
+                    shutdown(4)
+                 }
+
+VirtualMachineOperState ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The operational state of a virtual machine:
+
+            unknown(1)     The operational state of the virtual
+                           machine is unknown, e.g., because the
+                           implementation failed to obtain the state
+                           from the hypervisor.
+
+            other(2)       The operational state of the virtual
+                           machine indicating that an operational
+                           state is obtained from the hypervisor, but
+                           it is not a state defined in this MIB
+                           module.
+
+            preparing(3)   The operational state of the virtual
+                           machine indicating the virtual machine is
+
+                           currently in the process of preparation,
+                           e.g., allocating and initializing virtual
+                           storage after creating (defining) the
+                           virtual machine.
+
+            running(4)     The operational state of the virtual
+                           machine indicating the virtual machine is
+                           currently executed, but it is not in the
+                           process of preparing(3), suspending(5),
+                           resuming(7), migrating(9), and
+                           shuttingdown(10).
+
+            suspending(5)  The operational state of the virtual
+                           machine indicating the virtual machine is
+                           currently in the process of suspending
+                           to save its memory and CPU execution
+                           state to persistent store.  This is a
+                           transient state from running(4) to
+                           suspended(6).
+
+            suspended(6)   The operational state of the virtual
+                           machine indicating the virtual machine is
+                           currently suspended, which means the
+                           memory and CPU execution state of the
+                           virtual machine are saved to persistent
+                           store.  During this state, the virtual
+                           machine is not scheduled to execute by
+                           the hypervisor.
+
+            resuming(7)    The operational state of the virtual
+                           machine indicating the virtual machine is
+                           currently in the process of resuming
+                           to restore its memory and CPU execution
+                           state from persistent store.  This is a
+                           transient state from suspended(6) to
+                           running(4).
+
+            paused(8)      The operational state of the virtual
+                           machine indicating the virtual machine is
+                           resident in memory but no longer
+                           scheduled to execute by the hypervisor.
+
+            migrating(9)   The operational state of the virtual
+                           machine indicating the virtual machine is
+                           currently in the process of migration
+                           from/to another hypervisor.
+
+            shuttingdown(10)
+
+                           The operational state of the virtual
+                           machine indicating the virtual machine is
+                           currently in the process of shutting
+                           down.  This is a transient state from
+                           running(4) to shutdown(11).
+
+            shutdown(11)   The operational state of the virtual
+                           machine indicating the virtual machine is
+                           down, and CPU execution is no longer
+                           scheduled by the hypervisor and its
+                           memory is not resident in the hypervisor.
+
+            crashed(12)    The operational state of the virtual
+                           machine indicating the virtual machine
+                           has crashed."
+    SYNTAX       INTEGER {
+                    unknown(1),
+                    other(2),
+                    preparing(3),
+                    running(4),
+                    suspending(5),
+                    suspended(6),
+                    resuming(7),
+                    paused(8),
+                    migrating(9),
+                    shuttingdown(10),
+                    shutdown(11),
+                    crashed(12)
+                 }
+
+VirtualMachineAutoStart ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The autostart configuration of a virtual machine:
+
+            unknown(1)     The autostart configuration is unknown,
+                           e.g., because the implementation failed
+                           to obtain the autostart configuration
+                           from the hypervisor.
+
+            enabled(2)     The autostart configuration of the
+                           virtual machine is enabled.  The virtual
+                           machine should be automatically brought
+                           online at the next re-initialization of
+                           the hypervisor.
+
+            disabled(3)    The autostart configuration of the
+                           virtual machine is disabled.  The virtual
+
+                           machine should not be automatically
+                           brought online at the next
+                           re-initialization of the hypervisor."
+    SYNTAX      INTEGER {
+                    unknown(1),
+                    enabled(2),
+                    disabled(3)
+                }
+
+VirtualMachinePersistent ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "This value indicates whether a virtual machine has a
+            persistent configuration, which means the virtual machine
+            will still exist after shutting down:
+
+            unknown(1)     The persistent configuration is unknown,
+                           e.g., because the implementation failed
+                           to obtain the persistent configuration
+                           from the hypervisor. (read-only)
+
+            persistent(2)  The virtual machine is persistent, i.e.,
+                           the virtual machine will exist after it
+                           shuts down.
+
+            transient(3)   The virtual machine is transient, i.e.,
+                           the virtual machine will not exist after
+                           it shuts down."
+    SYNTAX       INTEGER {
+                    unknown(1),
+                    persistent(2),
+                    transient(3)
+                 }
+
+VirtualMachineCpuIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "A unique value for each virtual machine, greater than
+            zero, identifying a virtual CPU assigned to a virtual
+            machine.  The value for each virtual CPU MUST remain
+            constant at least from one re-initialization of the
+            hypervisor to the next re-initialization."
+     SYNTAX      Integer32 (1..2147483647)
+
+VirtualMachineStorageIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "A unique value for each virtual machine, greater than
+            zero, identifying a virtual storage device allocated to
+            a virtual machine.  The value for each virtual storage
+            device MUST remain constant at least from one
+            re-initialization of the hypervisor to the next
+            re-initialization."
+     SYNTAX      Integer32 (1..2147483647)
+
+VirtualMachineStorageSourceType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The source type of a virtual storage device:
+
+            unknown(1)     The source type is unknown, e.g., because
+                           the implementation failed to obtain the
+                           media type from the hypervisor.
+
+            other(2)       The source type is other than those
+                           defined in this conversion.
+
+            block(3)       The source type is a block device.
+
+            raw(4)         The source type is a raw-formatted file.
+
+            sparse(5)      The source type is a sparse file.
+
+            network(6)     The source type is a network device."
+    SYNTAX       INTEGER {
+                    unknown(1),
+                    other(2),
+                    block(3),
+                    raw(4),
+                    sparse(5),
+                    network(6)
+                 }
+
+VirtualMachineStorageAccess ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "The access permission of a virtual storage:
+
+            unknown(1)     The access permission of the virtual
+                           storage is unknown.
+
+            readwrite(2)   The virtual storage is a read-write
+                           device.
+
+            readonly(3)    The virtual storage is a read-only
+                           device."
+    SYNTAX       INTEGER {
+                    unknown(1),
+                    readwrite(2),
+                    readonly(3)
+                 }
+
+VirtualMachineNetworkIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "A unique value for each virtual machine, greater than
+            zero, identifying a virtual network interface allocated
+            to the virtual machine.  The value for each virtual
+            network interface MUST remain constant at least from one
+            re-initialization of the hypervisor to the next
+            re-initialization."
+     SYNTAX      Integer32 (1..2147483647)
+
+VirtualMachineList ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x"
+    STATUS       current
+    DESCRIPTION
+            "Each octet within this value specifies a set of eight
+            virtual machine vmIndex values, with the first octet
+            specifying virtual machine 1 through 8, the second octet
+            specifying virtual machine 9 through 16, etc.  Within
+            each octet, the most significant bit represents the
+            lowest-numbered vmIndex, and the least significant bit
+            represents the highest-numbered vmIndex.  Thus, each
+            virtual machine of the host is represented by a single
+            bit within the value of this object.  If that bit has
+            a value of '1', then that virtual machine is included
+            in the set of virtual machines; the virtual machine is
+            not included if its bit has a value of '0'."
+    SYNTAX      OCTET STRING
+
+-- The hypervisor group
+--
+-- A collection of objects common to all hypervisors.
+--
+vmHypervisor    OBJECT IDENTIFIER ::= { vmObjects 1 }
+
+vmHvSoftware OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A textual description of the hypervisor software.  This
+            value SHOULD NOT include its version as it SHOULD be
+            included in 'vmHvVersion'."
+    ::= { vmHypervisor 1 }
+
+vmHvVersion OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A textual description of the version of the hypervisor
+            software."
+    ::= { vmHypervisor 2 }
+
+vmHvObjectID OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The vendor's authoritative identification of the
+            hypervisor software contained in the entity.  This value
+            is allocated within the SMI enterprises
+            subtree (1.3.6.1.4.1).  Note that this is different from
+            sysObjectID in the SNMPv2-MIB (RFC 3418) because
+            sysObjectID is not the identification of the hypervisor
+            software but the device, firmware, or management
+            operating system."
+    ::= { vmHypervisor 3 }
+
+vmHvUpTime OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The time (in centiseconds) since the hypervisor was
+            last re-initialized.  Note that this is different from
+            sysUpTime in the SNMPv2-MIB (RFC 3418) and hrSystemUptime
+            in the HOST-RESOURCES-MIB (RFC 2790) because sysUpTime is
+            the uptime of the network management portion of the
+            system, and hrSystemUptime is the uptime of the
+            management operating system but not the hypervisor
+            software."
+    ::= { vmHypervisor 4 }
+
+-- The virtual machine information
+--
+
+-- A collection of objects common to all virtual machines.
+--
+vmNumber  OBJECT-TYPE
+    SYNTAX       Integer32 (0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of virtual machines (regardless of their
+            current state) present on this hypervisor."
+    ::= { vmObjects 2 }
+
+vmTableLastChange  OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The value of vmHvUpTime at the time of the last creation
+            or deletion of an entry in the vmTable."
+    ::= { vmObjects 3 }
+
+vmTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VmEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A list of virtual machine entries.  The number of
+            entries is given by the value of vmNumber."
+    ::= { vmObjects 4 }
+
+vmEntry OBJECT-TYPE
+    SYNTAX       VmEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "An entry containing management information applicable
+            to a particular virtual machine."
+    INDEX   { vmIndex }
+    ::= { vmTable 1 }
+
+VmEntry ::=
+    SEQUENCE {
+        vmIndex                 VirtualMachineIndex,
+        vmName                  SnmpAdminString,
+        vmUUID                  UUIDorZero,
+        vmOSType                SnmpAdminString,
+        vmAdminState            VirtualMachineAdminState,
+        vmOperState             VirtualMachineOperState,
+        vmAutoStart             VirtualMachineAutoStart,
+        vmPersistent            VirtualMachinePersistent,
+        vmCurCpuNumber          Integer32,
+        vmMinCpuNumber          Integer32,
+        vmMaxCpuNumber          Integer32,
+        vmMemUnit               Integer32,
+        vmCurMem                Integer32,
+        vmMinMem                Integer32,
+        vmMaxMem                Integer32,
+        vmUpTime                TimeTicks,
+        vmCpuTime               Counter64
+    }
+
+vmIndex OBJECT-TYPE
+    SYNTAX       VirtualMachineIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A unique value, greater than zero, identifying the
+            virtual machine.  The value assigned to a given virtual
+            machine may not persist across re-initialization of the
+            hypervisor.  A command generator MUST use the vmUUID to
+            identify a given virtual machine of interest."
+    ::= { vmEntry 1 }
+
+vmName OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A textual name of the virtual machine."
+    ::= { vmEntry 2 }
+
+vmUUID OBJECT-TYPE
+    SYNTAX       UUIDorZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The virtual machine's 128-bit Universally Unique
+            Identifier (UUID) or the zero-length string when a
+            UUID is not available.  If set, the UUID MUST uniquely
+            identify a virtual machine from all other virtual
+            machines in an administrative domain.  A zero-length
+            octet string is returned if no UUID information is
+            known."
+    ::= { vmEntry 3 }
+
+vmOSType OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A textual description containing operating system
+            information installed on the virtual machine.  This
+            value corresponds to the operating system the hypervisor
+            assumes to be running when the virtual machine is
+            started.  This may differ from the actual operating
+            system in case the virtual machine boots into a
+            different operating system."
+    ::= { vmEntry 4 }
+
+vmAdminState OBJECT-TYPE
+    SYNTAX       VirtualMachineAdminState
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The administrative state of the virtual machine."
+    ::= { vmEntry 5 }
+
+vmOperState OBJECT-TYPE
+    SYNTAX       VirtualMachineOperState
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The operational state of the virtual machine."
+    ::= { vmEntry 6 }
+
+vmAutoStart OBJECT-TYPE
+    SYNTAX       VirtualMachineAutoStart
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The autostart configuration of the virtual machine.  If
+            this value is enable(2), the virtual machine
+            automatically starts at the next initialization of the
+            hypervisor."
+    ::= { vmEntry 7 }
+
+vmPersistent OBJECT-TYPE
+    SYNTAX       VirtualMachinePersistent
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "This value indicates whether the virtual machine has a
+            persistent configuration, which means the virtual machine
+            will still exist after its shutdown."
+    ::= { vmEntry 8 }
+
+vmCurCpuNumber OBJECT-TYPE
+    SYNTAX       Integer32 (0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of virtual CPUs currently assigned to the
+            virtual machine."
+    ::= { vmEntry 9 }
+
+vmMinCpuNumber OBJECT-TYPE
+    SYNTAX       Integer32 (-1|0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The minimum number of virtual CPUs that are assigned to
+            the virtual machine when it is in a power-on state.  The
+            value -1 indicates that there is no hard boundary for
+            the minimum number of virtual CPUs."
+    ::= { vmEntry 10 }
+
+vmMaxCpuNumber OBJECT-TYPE
+    SYNTAX       Integer32 (-1|0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The maximum number of virtual CPUs that are assigned to
+            the virtual machine when it is in a power-on state.  The
+            value -1 indicates that there is no limit."
+    ::= { vmEntry 11 }
+
+vmMemUnit OBJECT-TYPE
+    SYNTAX       Integer32 (1..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The multiplication unit in bytes for vmCurMem, vmMinMem,
+            and vmMaxMem.  For example, when this value is 1024, the
+            memory size unit for vmCurMem, vmMinMem, and vmMaxMem is
+            KiB."
+    ::= { vmEntry 12 }
+
+vmCurMem OBJECT-TYPE
+    SYNTAX       Integer32 (0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The current memory size currently allocated to the
+            virtual memory module in the unit designated by
+
+            vmMemUnit."
+    ::= { vmEntry 13 }
+
+vmMinMem OBJECT-TYPE
+    SYNTAX       Integer32 (-1|0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The minimum memory size defined to the virtual machine
+            in the unit designated by vmMemUnit.  The value -1
+            indicates that there is no hard boundary for the minimum
+            memory size."
+    ::= { vmEntry 14 }
+
+vmMaxMem OBJECT-TYPE
+    SYNTAX       Integer32 (-1|0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The maximum memory size defined to the virtual machine
+            in the unit designated by vmMemUnit.  The value -1
+            indicates that there is no limit."
+    ::= { vmEntry 15 }
+
+vmUpTime OBJECT-TYPE
+    SYNTAX       TimeTicks
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The time (in centiseconds) since the administrative
+            state of the virtual machine was last changed from
+            shutdown(4) to running(1)."
+    ::= { vmEntry 16 }
+
+vmCpuTime OBJECT-TYPE
+    SYNTAX       Counter64
+    UNITS        "microsecond"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total CPU time used in microseconds.  If the number
+            of virtual CPUs is larger than 1, vmCpuTime may exceed
+            real time.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the hypervisor and
+            administrative state (vmAdminState) changes of the
+
+            virtual machine."
+    ::= { vmEntry 17 }
+
+-- The virtual CPU on each virtual machines
+vmCpuTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VmCpuEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The table of virtual CPUs provided by the hypervisor."
+    ::= { vmObjects 5 }
+
+vmCpuEntry OBJECT-TYPE
+    SYNTAX       VmCpuEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "An entry for one virtual processor assigned to a
+            virtual machine."
+    INDEX { vmIndex, vmCpuIndex }
+    ::= { vmCpuTable 1 }
+
+VmCpuEntry ::=
+    SEQUENCE {
+        vmCpuIndex              VirtualMachineCpuIndex,
+        vmCpuCoreTime           Counter64
+    }
+
+vmCpuIndex OBJECT-TYPE
+    SYNTAX       VirtualMachineCpuIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A unique value identifying a virtual CPU assigned to
+            the virtual machine."
+    ::= { vmCpuEntry 1 }
+
+vmCpuCoreTime OBJECT-TYPE
+    SYNTAX       Counter64
+    UNITS        "microsecond"
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total CPU time used by this virtual CPU in
+            microseconds.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the hypervisor and
+
+            administrative state (vmAdminState) changes of the
+            virtual machine."
+    ::= { vmCpuEntry 2 }
+
+-- The virtual CPU affinity on each virtual machines
+
+vmCpuAffinityTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VmCpuAffinityEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A list of CPU affinity entries of a virtual CPU."
+    ::= { vmObjects 6 }
+
+vmCpuAffinityEntry OBJECT-TYPE
+    SYNTAX       VmCpuAffinityEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "An entry containing CPU affinity associated with a
+            particular virtual machine."
+    INDEX   { vmIndex, vmCpuIndex, vmCpuPhysIndex }
+    ::= { vmCpuAffinityTable 1 }
+
+VmCpuAffinityEntry ::=
+    SEQUENCE {
+        vmCpuPhysIndex          Integer32,
+        vmCpuAffinity           INTEGER
+    }
+
+vmCpuPhysIndex OBJECT-TYPE
+    SYNTAX       Integer32 (1..2147483647)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A value identifying a physical CPU on the hypervisor.
+            On systems implementing the HOST-RESOURCES-MIB, the
+            value MUST be the same value that is used as the index
+            in the hrProcessorTable (hrDeviceIndex)."
+    ::= { vmCpuAffinityEntry 2 }
+
+vmCpuAffinity OBJECT-TYPE
+    SYNTAX       INTEGER {
+                    unknown(0),   -- unknown
+                    enable(1),    -- enabled
+                    disable(2)    -- disabled
+                 }
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The CPU affinity of this virtual CPU to the physical
+            CPU represented by 'vmCpuPhysIndex'."
+    ::= { vmCpuAffinityEntry 3 }
+
+-- The virtual storage devices on each virtual machine.  This
+-- document defines some overlapped objects with hrStorage in
+-- HOST-RESOURCES-MIB (RFC 2790), because virtual resources are
+-- allocated from the hypervisor's resources, which is the 'host
+-- resources'.
+vmStorageTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VmStorageEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The conceptual table of virtual storage devices
+            attached to the virtual machine."
+    ::= { vmObjects 7 }
+
+vmStorageEntry OBJECT-TYPE
+    SYNTAX       VmStorageEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "An entry for one virtual storage device attached to the
+            virtual machine."
+    INDEX { vmStorageVmIndex, vmStorageIndex }
+    ::= { vmStorageTable 1 }
+
+VmStorageEntry ::=
+    SEQUENCE {
+        vmStorageVmIndex        VirtualMachineIndexOrZero,
+        vmStorageIndex          VirtualMachineStorageIndex,
+        vmStorageParent         Integer32,
+        vmStorageSourceType     VirtualMachineStorageSourceType,
+        vmStorageSourceTypeString
+                                SnmpAdminString,
+        vmStorageResourceID     SnmpAdminString,
+        vmStorageAccess         VirtualMachineStorageAccess,
+        vmStorageMediaType      IANAStorageMediaType,
+        vmStorageMediaTypeString
+                                SnmpAdminString,
+        vmStorageSizeUnit       Integer32,
+        vmStorageDefinedSize    Integer32,
+        vmStorageAllocatedSize  Integer32,
+        vmStorageReadIOs        Counter64,
+        vmStorageWriteIOs       Counter64,
+        vmStorageReadOctets     Counter64,
+        vmStorageWriteOctets    Counter64,
+        vmStorageReadLatency    Counter64,
+        vmStorageWriteLatency   Counter64
+    }
+
+vmStorageVmIndex OBJECT-TYPE
+    SYNTAX       VirtualMachineIndexOrZero
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "This value identifies the virtual machine (guest) this
+            storage device has been allocated to.  The value zero
+            indicates that the storage device is currently not
+            allocated to any virtual machines."
+    ::= { vmStorageEntry 1 }
+
+vmStorageIndex OBJECT-TYPE
+    SYNTAX       VirtualMachineStorageIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A unique value identifying a virtual storage device
+            allocated to the virtual machine."
+    ::= { vmStorageEntry 2 }
+
+vmStorageParent OBJECT-TYPE
+    SYNTAX       Integer32 (0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The value of hrStorageIndex, which is the parent (i.e.,
+            physical) device of this virtual device on systems
+            implementing the HOST-RESOURCES-MIB.  The value zero
+            denotes this virtual device is not any child
+            represented in the hrStorageTable."
+    ::= { vmStorageEntry 3 }
+
+vmStorageSourceType OBJECT-TYPE
+    SYNTAX       VirtualMachineStorageSourceType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The source type of the virtual storage device."
+    ::= { vmStorageEntry 4 }
+
+vmStorageSourceTypeString OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A (detailed) textual string of the source type of the
+            virtual storage device.  For example, this represents
+            the specific format name of the sparse file."
+    ::= { vmStorageEntry 5 }
+
+vmStorageResourceID OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A textual string that represents the resource
+            identifier of the virtual storage.  For example, this
+            contains the path to the disk image file that
+            corresponds to the virtual storage."
+    ::= { vmStorageEntry 6 }
+
+vmStorageAccess OBJECT-TYPE
+    SYNTAX       VirtualMachineStorageAccess
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The access permission of the virtual storage device."
+    ::= { vmStorageEntry 7 }
+
+vmStorageMediaType OBJECT-TYPE
+    SYNTAX       IANAStorageMediaType
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The media type of the virtual storage device."
+    ::= { vmStorageEntry 8 }
+
+vmStorageMediaTypeString OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A (detailed) textual string of the virtual storage
+            media.  For example, this represents the specific driver
+            name of the emulated media such as 'IDE' and 'SCSI'."
+    ::= { vmStorageEntry 9 }
+
+vmStorageSizeUnit OBJECT-TYPE
+    SYNTAX       Integer32 (1..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The multiplication unit in bytes for
+            vmStorageDefinedSize and vmStorageAllocatedSize.  For
+            example, when this value is 1048576, the storage size
+            unit for vmStorageDefinedSize and vmStorageAllocatedSize
+            is MiB."
+    ::= { vmStorageEntry 10 }
+
+vmStorageDefinedSize OBJECT-TYPE
+    SYNTAX       Integer32 (-1|0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The defined virtual storage size defined in the unit
+            designated by vmStorageSizeUnit.  If this information is
+            not available, this value MUST be -1."
+    ::= { vmStorageEntry 11 }
+
+vmStorageAllocatedSize OBJECT-TYPE
+    SYNTAX       Integer32 (-1|0..2147483647)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The storage size allocated to the virtual storage from
+            a physical storage in the unit designated by
+            vmStorageSizeUnit.  When the virtual storage is block
+            device or raw file, this value and vmStorageDefinedSize
+            are supposed to equal.  This value MUST NOT be different
+            from vmStorageDefinedSize when vmStorageSourceType is
+            'block' or 'raw'.  If this information is not available,
+            this value MUST be -1."
+    ::= { vmStorageEntry 12 }
+
+vmStorageReadIOs OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of read I/O requests.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the hypervisor and
+            administrative state (vmAdminState) changes of the
+            virtual machine."
+    ::= { vmStorageEntry 13 }
+
+vmStorageWriteIOs OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The number of write I/O requests.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the hypervisor and
+            administrative state (vmAdminState) changes of the
+            virtual machine."
+    ::= { vmStorageEntry 14 }
+
+vmStorageReadOctets OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total number of bytes read from this device.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the hypervisor and
+            administrative state (vmAdminState) changes of the
+            virtual machine."
+    ::= { vmStorageEntry 15 }
+
+vmStorageWriteOctets OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total number of bytes written to this device.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the hypervisor and
+            administrative state (vmAdminState) changes of the
+            virtual machine."
+    ::= { vmStorageEntry 16 }
+
+vmStorageReadLatency OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total number of microseconds read requests have
+            been queued for this device.
+
+            This would typically be implemented by storing the high
+            precision system timestamp of when the request is
+
+            received from the virtual machine with the request, the
+            difference between this initial timestamp and the time
+            at which the requested operation has completed SHOULD be
+            converted to microseconds and accumulated.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the hypervisor and administrative
+            state (vmAdminState) changes of the virtual machine."
+    ::= { vmStorageEntry 17 }
+
+vmStorageWriteLatency OBJECT-TYPE
+    SYNTAX       Counter64
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The total number of microseconds write requests have
+            been queued for this device.
+
+            This would typically be implemented by storing the high
+            precision system timestamp of when the request is
+            received from the virtual machine with the request; the
+            difference between this initial timestamp and the time
+            at which the requested operation has completed SHOULD be
+            converted to microseconds and accumulated.
+
+            Discontinuities in the value of this counter can occur
+            at re-initialization of the hypervisor and
+            administrative state (vmAdminState) changes of the
+            virtual machine."
+    ::= { vmStorageEntry 18 }
+
+-- The virtual network interfaces on each virtual machine.
+vmNetworkTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF VmNetworkEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "The conceptual table of virtual network interfaces
+            attached to the virtual machine."
+    ::= { vmObjects 8 }
+
+vmNetworkEntry OBJECT-TYPE
+    SYNTAX       VmNetworkEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "An entry for one virtual network interface attached to
+
+            the virtual machine."
+    INDEX { vmIndex, vmNetworkIndex }
+    ::= { vmNetworkTable 1 }
+
+VmNetworkEntry ::=
+    SEQUENCE {
+        vmNetworkIndex          VirtualMachineNetworkIndex,
+        vmNetworkIfIndex        InterfaceIndexOrZero,
+        vmNetworkParent         InterfaceIndexOrZero,
+        vmNetworkModel          SnmpAdminString,
+        vmNetworkPhysAddress    PhysAddress
+    }
+
+vmNetworkIndex OBJECT-TYPE
+    SYNTAX       VirtualMachineNetworkIndex
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+            "A unique value identifying a virtual network interface
+            allocated to the virtual machine."
+    ::= { vmNetworkEntry 1 }
+
+vmNetworkIfIndex OBJECT-TYPE
+    SYNTAX       InterfaceIndexOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The value of ifIndex, which corresponds to this virtual
+            network interface.  If this device is not represented in
+            the ifTable, then this value MUST be zero."
+    ::= { vmNetworkEntry 2 }
+
+vmNetworkParent OBJECT-TYPE
+    SYNTAX       InterfaceIndexOrZero
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The value of ifIndex, which corresponds to the parent
+            (i.e., physical) device of this virtual device.  The
+            value zero denotes this virtual device is not any
+            child represented in the ifTable."
+    ::= { vmNetworkEntry 3 }
+
+vmNetworkModel OBJECT-TYPE
+    SYNTAX       SnmpAdminString (SIZE (0..255))
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "A textual string containing the (emulated) model of the
+            virtual network interface.  For example, this value is
+            'virtio' when the emulation driver model is virtio."
+    ::= { vmNetworkEntry 4 }
+
+vmNetworkPhysAddress OBJECT-TYPE
+    SYNTAX       PhysAddress
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+            "The Media Access Control (MAC) address of the virtual
+            network interface."
+    ::= { vmNetworkEntry 5 }
+
+-- Notification definitions:
+
+vmPerVMNotificationsEnabled OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+            "Indicates if the notification generator will send
+            notifications per virtual machine.  Changes to this
+            object MUST NOT persist across re-initialization of
+            the management system, e.g., SNMP agent."
+    ::= { vmObjects 9 }
+
+vmBulkNotificationsEnabled OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+            "Indicates if the notification generator will send
+            notifications per set of virtual machines.  Changes to
+            this object MUST NOT persist across re-initialization of
+            the management system, e.g., SNMP agent."
+    ::= { vmObjects 10 }
+
+vmAffectedVMs OBJECT-TYPE
+    SYNTAX       VirtualMachineList
+    MAX-ACCESS   accessible-for-notify
+    STATUS       current
+    DESCRIPTION
+            "A complete list of virtual machines whose state has
+            changed.  This object is the only object sent with bulk
+            notifications."
+    ::= { vmObjects 11 }
+
+vmRunning NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            running(4) from some other state.  The other state is
+            indicated by the included value of vmOperState."
+    ::= { vmNotifications 1 }
+
+vmShuttingdown NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            shuttingdown(10) from some other state.  The other state
+            is indicated by the included value of vmOperState."
+    ::= { vmNotifications 2 }
+
+vmShutdown NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            shutdown(11) from some other state.  The other state is
+            indicated by the included value of vmOperState."
+    ::= { vmNotifications 3 }
+
+vmPaused NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            paused(8) from some other state.  The other state is
+            indicated by the included value of vmOperState."
+    ::= { vmNotifications 4 }
+
+vmSuspending NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            suspending(5) from some other state.  The other state is
+            indicated by the included value of vmOperState."
+    ::= { vmNotifications 5 }
+
+vmSuspended NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            suspended(6) from some other state.  The other state is
+            indicated by the included value of vmOperState."
+    ::= { vmNotifications 6 }
+
+vmResuming NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            resuming(7) from some other state.  The other state is
+            indicated by the included value of vmOperState."
+    ::= { vmNotifications 7 }
+
+vmMigrating NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of a virtual machine has been changed to
+            migrating(9) from some other state.  The other state is
+            indicated by the included value of vmOperState."
+    ::= { vmNotifications 8 }
+
+vmCrashed NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when a virtual machine
+            has been crashed.  The previous state of the virtual
+            machine is indicated by the included value of
+            vmOperState."
+    ::= { vmNotifications 9 }
+
+vmDeleted NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmName,
+                    vmUUID,
+                    vmOperState,
+                    vmPersistent
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when a virtual machine
+            has been deleted.  The prior state of the virtual
+            machine is indicated by the included value of
+            vmOperState."
+    ::= { vmNotifications 10 }
+
+vmBulkRunning NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmAffectedVMs
+
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machines has been changed
+            to running(4) from any prior state, except for
+            running(4).  Management stations are encouraged to
+            subsequently poll the subset of virtual machines of
+            interest for vmOperState."
+    ::= { vmNotifications 11 }
+
+vmBulkShuttingdown NOTIFICATION-TYPE
+    OBJECTS      {
+                   vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machines has been changed
+            to shuttingdown(10) from a state other than
+            shuttingdown(10).  Management stations are encouraged to
+            subsequently poll the subset of virtual machines of
+            interest for vmOperState."
+    ::= { vmNotifications 12 }
+
+vmBulkShutdown NOTIFICATION-TYPE
+    OBJECTS      {
+                   vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machine has been changed to
+            shutdown(11) from a state other than shutdown(11).
+            Management stations are encouraged to subsequently poll
+            the subset of virtual machines of interest for
+            vmOperState."
+    ::= { vmNotifications 13 }
+
+vmBulkPaused NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machines has been changed
+            to paused(8) from a state other than paused(8).
+
+            Management stations are encouraged to subsequently poll
+            the subset of virtual machines of interest for
+            vmOperState."
+    ::= { vmNotifications 14 }
+
+vmBulkSuspending NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machines has been changed
+            to suspending(5) from a state other than suspending(5).
+            Management stations are encouraged to subsequently poll
+            the subset of virtual machines of interest for
+            vmOperState."
+    ::= { vmNotifications 15 }
+
+vmBulkSuspended NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machines has been changed
+            to suspended(6) from a state other than suspended(6).
+            Management stations are encouraged to subsequently poll
+            the subset of virtual machines of interest for
+            vmOperState."
+    ::= { vmNotifications 16 }
+
+vmBulkResuming NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machines has been changed
+            to resuming(7) from a state other than resuming(7).
+            Management stations are encouraged to subsequently poll
+            the subset of virtual machines of interest for
+            vmOperState."
+    ::= { vmNotifications 17 }
+
+vmBulkMigrating NOTIFICATION-TYPE
+
+    OBJECTS      {
+                    vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when the operational
+            state of one or more virtual machines has been changed
+            to migrating(9) from a state other than migrating(9).
+            Management stations are encouraged to subsequently poll
+            the subset of virtual machines of interest for
+            vmOperState."
+    ::= { vmNotifications 18 }
+
+vmBulkCrashed NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when one or more virtual
+            machines have been crashed.  Management stations are
+            encouraged to subsequently poll the subset of virtual
+            machines of interest for vmOperState."
+    ::= { vmNotifications 19 }
+
+vmBulkDeleted NOTIFICATION-TYPE
+    OBJECTS      {
+                    vmAffectedVMs
+                 }
+    STATUS       current
+    DESCRIPTION
+            "This notification is generated when one or more virtual
+            machines have been deleted.  Management stations are
+            encouraged to subsequently poll the subset of virtual
+            machines of interest for vmOperState."
+    ::= { vmNotifications 20 }
+
+-- Compliance definitions:
+vmCompliances  OBJECT IDENTIFIER ::= { vmConformance 1 }
+vmGroups       OBJECT IDENTIFIER ::= { vmConformance 2 }
+
+vmFullCompliances MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+            "Compliance statement for implementations supporting
+            read/write access, according to the object definitions."
+    MODULE     -- this module
+    MANDATORY-GROUPS {
+
+        vmHypervisorGroup,
+        vmVirtualMachineGroup,
+        vmCpuGroup,
+        vmCpuAffinityGroup,
+        vmStorageGroup,
+        vmNetworkGroup
+    }
+    GROUP  vmPerVMNotificationOptionalGroup
+    DESCRIPTION
+            "Support for per-VM notifications is optional.  If not
+            implemented, then vmPerVMNotificationsEnabled MUST report
+            false(2)."
+    GROUP  vmBulkNotificationsVariablesGroup
+    DESCRIPTION
+            "Necessary only if vmPerVMNotificationOptionalGroup is
+            implemented."
+    GROUP  vmBulkNotificationOptionalGroup
+    DESCRIPTION
+            "Support for bulk notifications is optional.  If not
+            implemented, then vmBulkNotificationsEnabled MUST report
+            false(2)."
+    ::= { vmCompliances 1 }
+
+vmReadOnlyCompliances MODULE-COMPLIANCE
+    STATUS       current
+    DESCRIPTION
+            "Compliance statement for implementations supporting
+            only read-only access."
+    MODULE     -- this module
+    MANDATORY-GROUPS {
+        vmHypervisorGroup,
+        vmVirtualMachineGroup,
+        vmCpuGroup,
+        vmCpuAffinityGroup,
+        vmStorageGroup,
+        vmNetworkGroup
+    }
+
+    OBJECT vmPerVMNotificationsEnabled
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required."
+
+    OBJECT vmBulkNotificationsEnabled
+    MIN-ACCESS   read-only
+    DESCRIPTION
+            "Write access is not required."
+    ::= { vmCompliances 2 }
+
+vmHypervisorGroup OBJECT-GROUP
+    OBJECTS {
+        vmHvSoftware,
+        vmHvVersion,
+        vmHvObjectID,
+        vmHvUpTime,
+        vmNumber,
+        vmTableLastChange,
+        vmPerVMNotificationsEnabled,
+        vmBulkNotificationsEnabled
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of objects providing insight into the
+            hypervisor itself."
+     ::= { vmGroups 1 }
+
+vmVirtualMachineGroup OBJECT-GROUP
+    OBJECTS {
+        -- vmIndex
+        vmName,
+        vmUUID,
+        vmOSType,
+        vmAdminState,
+        vmOperState,
+        vmAutoStart,
+        vmPersistent,
+        vmCurCpuNumber,
+        vmMinCpuNumber,
+        vmMaxCpuNumber,
+        vmMemUnit,
+        vmCurMem,
+        vmMinMem,
+        vmMaxMem,
+        vmUpTime,
+        vmCpuTime
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of objects providing insight into the
+            virtual machines controlled by a hypervisor."
+    ::= { vmGroups 2 }
+
+vmCpuGroup OBJECT-GROUP
+    OBJECTS {
+        -- vmCpuIndex,
+        vmCpuCoreTime
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of objects providing insight into the
+            virtual machines controlled by a hypervisor."
+    ::= { vmGroups 3 }
+
+vmCpuAffinityGroup OBJECT-GROUP
+    OBJECTS {
+        -- vmCpuPhysIndex,
+        vmCpuAffinity
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of objects providing insight into the
+            virtual machines controlled by a hypervisor."
+    ::= { vmGroups 4 }
+
+vmStorageGroup OBJECT-GROUP
+    OBJECTS {
+        -- vmStorageVmIndex,
+        -- vmStorageIndex,
+        vmStorageParent,
+        vmStorageSourceType,
+        vmStorageSourceTypeString,
+        vmStorageResourceID,
+        vmStorageAccess,
+        vmStorageMediaType,
+        vmStorageMediaTypeString,
+        vmStorageSizeUnit,
+        vmStorageDefinedSize,
+        vmStorageAllocatedSize,
+        vmStorageReadIOs,
+        vmStorageWriteIOs,
+        vmStorageReadOctets,
+        vmStorageWriteOctets,
+        vmStorageReadLatency,
+        vmStorageWriteLatency
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of objects providing insight into the
+            virtual storage devices controlled by a hypervisor."
+    ::= { vmGroups 5 }
+
+vmNetworkGroup OBJECT-GROUP
+    OBJECTS {
+
+        -- vmNetworkIndex,
+        vmNetworkIfIndex,
+        vmNetworkParent,
+        vmNetworkModel,
+        vmNetworkPhysAddress
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of objects providing insight into the
+            virtual network interfaces controlled by a hypervisor."
+    ::= { vmGroups 6 }
+
+vmPerVMNotificationOptionalGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        vmRunning,
+        vmShuttingdown,
+        vmShutdown,
+        vmPaused,
+        vmSuspending,
+        vmSuspended,
+        vmResuming,
+        vmMigrating,
+        vmCrashed,
+        vmDeleted
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of notifications for per-VM notification
+            of changes to virtual machine state (vmOperState) as
+            reported by a hypervisor."
+    ::= { vmGroups 7 }
+
+vmBulkNotificationsVariablesGroup OBJECT-GROUP
+    OBJECTS {
+        vmAffectedVMs
+    }
+    STATUS       current
+    DESCRIPTION
+            "The variables used in vmBulkNotificationOptionalGroup
+            virtual network interfaces controlled by a hypervisor."
+    ::= { vmGroups 8 }
+
+vmBulkNotificationOptionalGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+        vmBulkRunning,
+        vmBulkShuttingdown,
+        vmBulkShutdown,
+        vmBulkPaused,
+        vmBulkSuspending,
+        vmBulkSuspended,
+        vmBulkResuming,
+        vmBulkMigrating,
+        vmBulkCrashed,
+        vmBulkDeleted
+    }
+    STATUS       current
+    DESCRIPTION
+            "A collection of notifications for bulk notification of
+            changes to virtual machine state (vmOperState) as
+            reported by a given hypervisor."
+    ::= { vmGroups 9 }
+
+END