6 files changed, 39 insertions, 23 deletions
diff --git a/gnu/libexec/uucp/Makefile b/gnu/libexec/uucp/Makefile
index d408d413709..ad25c3f180e 100644
--- a/gnu/libexec/uucp/Makefile
+++ b/gnu/libexec/uucp/Makefile
@@ -1,8 +1,9 @@
 # This is the Makefile for Taylor UUCP
-# $Id: Makefile,v 1.1 1995/10/18 08:38:22 deraadt Exp $
+# $Id: Makefile,v 1.2 1996/12/08 22:39:31 tholo Exp $
 
 SUBDIR=		libunix libuucp libuuconf \
 		cu uuchk uucico uuconv uucp uulog uuname uupick uusched \
-		uustat uuto uux uuxqt
+		uustat uuto uux uuxqt \
+		sample
 
 .include <bsd.subdir.mk>
diff --git a/gnu/libexec/uucp/sample/Makefile b/gnu/libexec/uucp/sample/Makefile
new file mode 100644
index 00000000000..9070559501b
--- /dev/null
+++ b/gnu/libexec/uucp/sample/Makefile
@@ -0,0 +1,15 @@
+#	$OpenBSD: Makefile,v 1.1 1996/12/08 22:39:32 tholo Exp $
+
+FILES=	call config dial dialcode passwd port sys
+NOOBJ=	noobj
+
+install:
+	@echo installing ${FILES}
+	@-for i in ${FILES}; do \
+		if [ ! -f ${DESTDIR}/etc/uucp/$$i ]; then \
+			${INSTALL} ${COPY} -o root -g wheel -m 644 $$i \
+				${DESTDIR}/etc/uucp; \
+		fi; \
+	done
+
+.include <bsd.prog.mk>
diff --git a/gnu/libexec/uucp/sample/call b/gnu/libexec/uucp/sample/call
index de4190ce612..d9385647217 100644
--- a/gnu/libexec/uucp/sample/call
+++ b/gnu/libexec/uucp/sample/call
@@ -17,4 +17,4 @@
 # to connect to the remote system.
 
 # The format is just system-name login-name password.
-uunet Uairs foobar
+#uunet Uairs foobar
diff --git a/gnu/libexec/uucp/sample/passwd b/gnu/libexec/uucp/sample/passwd
index 2b04e13a343..6f4d75068f8 100644
--- a/gnu/libexec/uucp/sample/passwd
+++ b/gnu/libexec/uucp/sample/passwd
@@ -15,4 +15,4 @@
 # but not permitting remote users to actually log in to the system.
 
 # The format is just login-name password.
-Uairs foobar
+#Uairs foobar
diff --git a/gnu/libexec/uucp/sample/port b/gnu/libexec/uucp/sample/port
index 8e481869b56..83332bcd320 100644
--- a/gnu/libexec/uucp/sample/port
+++ b/gnu/libexec/uucp/sample/port
@@ -14,28 +14,28 @@
 # for all ports that appear later in the file.  In this case all ports
 # will default to being modems (other possible types are direct, tcp
 # and tli).
-type modem
+#type modem
 
 # Now we describe two ports.
 
 # This is the name of the port.  This name may be used in the sys file
 # to select the port, or the sys file may just specify a baud rate in
 # which case the first matching unlocked port will be used.
-port port1
+#port port1
 
 # This is the device name to open to dial out.
-device /dev/ttyd0
+#device /dev/ttyd0
 
 # This is the dialer to use, as described in the dialer file.
-dialer hayes
+#dialer hayes
 
 # This is the baud rate to dial out at.
-speed 2400
+#speed 2400
 
 # Here is a second port.  This is like the first, except that it uses
 # a different device.  It also permits a range of speeds, which is
 # mainly useful if the system specifies a particular baud rate.
-port port2
-device /dev/ttyd1
-dialer hayes
-speed-range 2400 9600
+#port port2
+#device /dev/ttyd1
+#dialer hayes
+#speed-range 2400 9600
diff --git a/gnu/libexec/uucp/sample/sys1 b/gnu/libexec/uucp/sample/sys
index fa9e7709e1c..ea86cab7796 100644
--- a/gnu/libexec/uucp/sample/sys1
+++ b/gnu/libexec/uucp/sample/sys
@@ -15,30 +15,30 @@
 # provides another example.
 
 # The name of the remote system that we call.
-system uunet
+#system uunet
 
 # The login name and password are kept in the callout password file
 # (by default this is the file "call" in newconfigdir).
-call-login *
-call-password *
+#call-login *
+#call-password *
 
 # We can send anything at any time.
-time any
+#time any
 
 # During the day we only accept grade 'Z' or above; at other times
 # (not mentioned here) we accept all grades.  uunet queues up news
 # at grade 'd', which is lower than 'Z'.
-call-timegrade Z Wk0755-2305,Su1655-2305
+#call-timegrade Z Wk0755-2305,Su1655-2305
 
 # The phone number to call.
-phone 7389449
+#phone 7389449
 
 # uunet tends to be slow, so we increase the timeout
-chat-timeout 120
+#chat-timeout 120
 
 # The port we use to dial out.
-port serial
+#port serial
 
 # Increase the timeout and the number of retries.
-protocol-parameter g timeout 20
-protocol-parameter g retries 10
+#protocol-parameter g timeout 20
+#protocol-parameter g retries 10